This document provides instructions for disassembling and assembling components of a 336E excavator. It describes how to:
1. Remove and install the final drive and travel motor, which requires draining fluids, disconnecting hoses, and removing bolts.
2. Disassemble the final drive by removing the cover, gears, bearings, and other internal parts.
3. Assemble the travel motor by precisely installing seals, springs, pistons, and other components in the correct order and orientation.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjskekdm
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 28 steps to disassemble the travel motor, including removing seals, springs, pistons, and other components. It then describes 13 steps for installation, which involves reassembling these parts in reverse order and noting proper torque specifications for bolts. The final step states to install the travel motor by following the removal procedures in reverse order.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix gtj) service repair manual (gtj0000...fjskekmdm
The document provides instructions for assembling a travel motor used in excavators. It describes 27 steps to assemble components like seals, springs, pistons, and plates into the motor housing. Key steps include lubricating mating surfaces, installing retaining rings, and tightening bolts to specified torques. The assembly ends by installing the motor housing cover and bolts, and noting the motor is then ready for installation in the excavator.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...fjskekdmjekm
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided regarding weight of components. The assembly process specifies applying thread locking compound and tightening bolts to the specified torques.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...fjskekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, O-rings, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly process in 21 steps and provides warnings about spring-loaded components and ensuring proper alignment of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group, and Loctite.
Caterpillar cat 336 e l excavator (prefix bzy) service repair manual (bzy0000...fjskekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate and keys. Special tools are listed that are required for tasks like removing races and installing seals. Safety notices advise wearing protective equipment when working with spring-loaded parts.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjskekmdm
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. It lists 27 steps for disassembly, removing components like the head, springs, brake piston, plates and discs. It then lists 28 steps for assembly, reinstalling these components in reverse order and noting proper lubrication and torque specifications. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group and Loctite.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjskekdm
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 28 steps to disassemble the travel motor, including removing seals, springs, pistons, and other components. It then describes 13 steps for installation, which involves reassembling these parts in reverse order and noting proper torque specifications for bolts. The final step states to install the travel motor by following the removal procedures in reverse order.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix gtj) service repair manual (gtj0000...fjskekmdm
The document provides instructions for assembling a travel motor used in excavators. It describes 27 steps to assemble components like seals, springs, pistons, and plates into the motor housing. Key steps include lubricating mating surfaces, installing retaining rings, and tightening bolts to specified torques. The assembly ends by installing the motor housing cover and bolts, and noting the motor is then ready for installation in the excavator.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...fjskekdmjekm
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided regarding weight of components. The assembly process specifies applying thread locking compound and tightening bolts to the specified torques.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...fjskekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, O-rings, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly process in 21 steps and provides warnings about spring-loaded components and ensuring proper alignment of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group, and Loctite.
Caterpillar cat 336 e l excavator (prefix bzy) service repair manual (bzy0000...fjskekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate and keys. Special tools are listed that are required for tasks like removing races and installing seals. Safety notices advise wearing protective equipment when working with spring-loaded parts.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjskekmdm
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. It lists 27 steps for disassembly, removing components like the head, springs, brake piston, plates and discs. It then lists 28 steps for assembly, reinstalling these components in reverse order and noting proper lubrication and torque specifications. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group and Loctite.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f7usuejkdkddm3
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...ufs89eodkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmmdmd1
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjfyjsekdmme
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive by removing coupling and bolts.
3) Dismantling the final drive further by removing its cover, gears, bearings, and other internal components.
The assembly instructions are provided in reverse order. Precise torques are specified for reinstalling each component.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmdmdm
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which requires draining oil, disconnecting hoses, and removing bolts and couplings. Tools required for assembly and removal are also listed.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using anti-seize compound on threads. The overall process involves carefully removing and reinstalling multiple components of the excavator's hydraulic system.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using a thread locking compound. The overall summary is that this provides detailed removal and installation instructions for an excavator travel motor, outlining over two dozen individual steps.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjkkekmdm
The document provides instructions for disassembling and assembling a travel motor. It details 27 steps for assembling the travel motor that include installing seals, springs, pistons, and other components in the proper order and orientation. Thirteen steps are listed for disassembling the final drive and travel motor assembly, which include removing hoses, bolts, and separating the final drive from the travel motor. Safety precautions are provided regarding the use of lifting devices to handle heavy components and releasing hydraulic pressure before disassembly.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...jfskemsemm
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using anti-seize compound on threads. The overall process involves carefully removing and reinstalling multiple components of the excavator's hydraulic system.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual (FJH00001...jdkskmmdmd1
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Mc cormick c l mondial tier 2 (2007- ) - rt30 - c 80 l tractor service repair...fjekkdmmem
This document provides part numbers and descriptions for engine components of a McCormick RT30 tractor. It lists 46 individual parts for the engine, including cylinders, pistons, gears, shafts, plates and other internal components. Each part is identified by a reference number, description, and whether it is for the engine (T-A) or transmission (T-B). It also specifies components that are part of assemblies and not individually serviced.
Mc cormick c l mondial tier 2 (2007- ) - rt30 - c 75 l tractor service repair...fjekkdmmem
This document provides component part listings and information for an engine. It includes over 80 individual part listings with details like part numbers, replacement kits, and torque specifications. The parts are for components of the engine like the cylinder block, crankshaft, pistons, rods, head, valves, rockers, and various fasteners. It also provides the engine model and serial number range the parts correspond to.
More Related Content
Similar to Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh00001 and up)
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f7usuejkdkddm3
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...ufs89eodkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmmdmd1
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjfyjsekdmme
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive by removing coupling and bolts.
3) Dismantling the final drive further by removing its cover, gears, bearings, and other internal components.
The assembly instructions are provided in reverse order. Precise torques are specified for reinstalling each component.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmdmdm
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which requires draining oil, disconnecting hoses, and removing bolts and couplings. Tools required for assembly and removal are also listed.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using anti-seize compound on threads. The overall process involves carefully removing and reinstalling multiple components of the excavator's hydraulic system.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using a thread locking compound. The overall summary is that this provides detailed removal and installation instructions for an excavator travel motor, outlining over two dozen individual steps.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjkkekmdm
The document provides instructions for disassembling and assembling a travel motor. It details 27 steps for assembling the travel motor that include installing seals, springs, pistons, and other components in the proper order and orientation. Thirteen steps are listed for disassembling the final drive and travel motor assembly, which include removing hoses, bolts, and separating the final drive from the travel motor. Safety precautions are provided regarding the use of lifting devices to handle heavy components and releasing hydraulic pressure before disassembly.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...jfskemsemm
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using anti-seize compound on threads. The overall process involves carefully removing and reinstalling multiple components of the excavator's hydraulic system.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual (FJH00001...jdkskmmdmd1
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Similar to Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh00001 and up) (20)
Mc cormick c l mondial tier 2 (2007- ) - rt30 - c 80 l tractor service repair...fjekkdmmem
This document provides part numbers and descriptions for engine components of a McCormick RT30 tractor. It lists 46 individual parts for the engine, including cylinders, pistons, gears, shafts, plates and other internal components. Each part is identified by a reference number, description, and whether it is for the engine (T-A) or transmission (T-B). It also specifies components that are part of assemblies and not individually serviced.
Mc cormick c l mondial tier 2 (2007- ) - rt30 - c 75 l tractor service repair...fjekkdmmem
This document provides component part listings and information for an engine. It includes over 80 individual part listings with details like part numbers, replacement kits, and torque specifications. The parts are for components of the engine like the cylinder block, crankshaft, pistons, rods, head, valves, rockers, and various fasteners. It also provides the engine model and serial number range the parts correspond to.
Mc cormick c l mondial tier 2 (2007- ) - rt30 - c 60 l tractor service repair...fjekkdmmem
This document contains information about engine components for a Perkins engine, including identification numbers, part names and numbers, quantities, and repair kit information. It lists 40 line items describing individual engine parts and components such as cylinders, bearings, gears, plates, seals, and other items, along with specifications like torque settings. Additional information provided includes manufacturer and model details and notes on replacement parts.
Mc cormick c l europa tier 3 (2008-2015) - rs51 - c80l tractor service repair...fjekkdmmem
This document provides component part listings and information for engines. It includes listings of parts with identification numbers, part names, quantities and other technical specifications. For example, it lists a Perkins engine with a 54.5 kw output, and it provides listings of cylinder blocks, gears, pistons and other engine parts along with identifying information for each. It contains detailed technical specifications and part numbers for replacement components.
Mc cormick c l europa tier 3 (2008-2015) - rs51 - c75l tractor service repair...fjekkdmmem
This document provides component part listings and information for the repair and replacement of parts for a Perkins XL75075 engine. It includes over 40 individual part listings with details like part numbers, component names, replacement part kits, and specifications. The parts cover various engine systems like the cylinder block, crankshaft, cylinder head, camshaft, and fuel system.
Mc cormick c l europa tier 2 (2007-2008) - rs50 - 80 tractor service repair m...fjekkdmmem
This document provides a list of components for an engine, including identification numbers, names, and other details. It lists items like cylinders, bearings, plugs, gears, plates, and other engine parts. Quantities and part numbers are provided for each component. Notes indicate some items are only to be ordered as replacements and provide color coding for identifying similar parts.
Mc cormick c l europa tier 2 (2007-2008) - rs50 - 60 tractor service repair m...fjekkdmmem
This document contains parts lists and component information for engines. It lists individual engine parts like cylinders, bearings, plugs, and includes information like part numbers, replacement kits, and quantity per tractor. The parts are associated with assemblies for engines and components like the head, shaft, rockers, and gear kit. Quantity, replacement and reference information is provided for each listed part.
Mc cormick c series c100 tractor service repair manualfjekkdmmem
The document contains parts listings and diagrams for engine, cooling system, air intake, and exhaust components for McCormick tractors. It includes lists of parts with identification numbers, quantities, and component names. Diagrams show the assembly and placement of parts within various engine and systems. The document provides extensive reference information for locating and identifying replacement parts for several tractor systems.
Mc cormick c series c90 tractor service repair manualfjekkdmmem
The document contains parts listings and diagrams for engine, cooling system, air intake, and exhaust components for McCormick tractors. It includes lists of parts with descriptions and part numbers needed to service or replace components like the engine, radiator, air cleaner, and exhaust system. Diagrams show the assembly, placement and connections of parts in the various systems. The document provides the information necessary to identify replacement parts for maintenance and repair of engine-related systems.
Mc cormick c series c80 tractor service repair manualfjekkdmmem
The document contains parts listings and diagrams for engine, cooling system, air intake, and exhaust components for McCormick tractors. It includes lists of parts with descriptions and part numbers needed to service or replace components like the engine, radiator, air cleaner, and exhaust system. Diagrams show the assembly, placement and connections of parts in the various systems. The document provides the information necessary to identify replacement parts for maintenance and repair of engine-related systems.
Kubota b1700 d tractor parts catalogue manualfjekkdmmem
The document provides instructions and definitions for parts books. It defines column headings for part number pages including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It notes country codes that may be included and what they represent. The document then provides an index of parts for Reference B1700D organized by system, with the corresponding part number, description, and parts book reference.
Kubota b1550 hst d tractor parts catalogue manualfjekkdmmem
The document provides instructions and part listings for a parts book. It defines the column headings used in parts book pages including part number, description, quantity, and serial number range. Country codes are also defined, indicating any country-specific differences. The remainder of the document is a sample page from the parts book, listing over 100 individual part numbers for a tractor engine and components.
Kubota b1550 e tractor parts catalogue manualfjekkdmmem
The document provides instructions for parts books. It defines column headings used on parts number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes are also explained, with symbols indicating the country each part is for. An example page from a parts book is then shown, listing parts for a B1550E engine with corresponding details.
Cub cadet lt 1222 lawn tractor service repair manualfjekkdmmem
This service manual provides instructions for servicing 1000/1500 series riding tractors manufactured by MTD Products Inc. It covers a range of models from 2001-2006 with various engines and drive systems. The manual outlines procedures for removing and replacing components like the hood, fenders, deck, drive belts, brakes, and transaxle. Safety notices advise that the manual is intended for trained technicians experienced with outdoor power equipment.
Cub cadet lt 1050 lawn tractor service repair manualfjekkdmmem
This service manual provides instructions for servicing 1000/1500 Series riding tractors manufactured by MTD Products Inc. It covers a range of models from 2001-2006 with various single-cylinder and V-twin engines from Kohler and Kawasaki. The manual describes the different hood, deck, and drive system configurations used on these tractors and provides procedures for removing components like the hood, fenders, deck, and transaxle for repair. Safety notices advise that the manual is intended only for trained technicians experienced with outdoor power equipment.
Claas dominator 98 combine (093) service repair manualfjekkdmmem
The document is a repair manual that provides instructions for repairing various components of CLAAS Dominator 108 VX, 98 VX, and 88 VX combine harvesters. It includes sections on the operator's platform, threshing mechanism, cleaning systems, and other areas. The manual provides detailed steps for removing, dismantling, installing, and assembling parts. It also includes exploded diagrams and specifications to aid in repairs.
Claas dominator 88 combine (092) service repair manualfjekkdmmem
The document is a repair manual that provides instructions for repairing various components of CLAAS Dominator 108 VX, 98 VX, and 88 VX combine harvesters. It includes sections on the operator's platform, threshing mechanism, cleaning systems, and other areas. The manual provides detailed steps for removing, dismantling, installing, and assembling parts. It also includes exploded diagrams and specifications to aid in repairs.
New holland t7.220 power command tractor service repair manualfjekkdmmem
This document is a service manual for Case IH T7 tractor models 220, 235, 250, 260, and 270. It provides specifications and repair/maintenance procedures for the engine, transmission, axles, brakes, hydraulics, pneumatics, hitches, frames, steering, wheels, climate control, and electrical systems of these tractor models. The manual is intended to assist technicians in servicing and repairing components of the tractors. It contains detailed sections on the engine, transmission, axles and other core systems along with part numbers and specifications.
New holland t7.175 auto command stage iv tractor service repair manualfjekkdmmem
This document is a service manual that provides information on servicing various components of tractor models T7.175 AutoCommandTM, T7.175, T7.190 AutoCommandTM, T7.190, T7.210 AutoCommandTM, T7.210, and T7.225 AutoCommandTM. The manual contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork and decals. Each section provides removal and installation instructions, specifications
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR BMH
Configuration: 336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 13 19:40:56 UTC+0800 2020
10/10336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SE...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR BMH
Configuration: 336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
1/5336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g02108761
2. Remove bolts (1) and cover (2).
3. Separate the track.
Illustration 2 g02108762
4. Disconnect hose assemblies (3) ( 4), and (6). Remove fitting (5).
2/5336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
3/5336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
4/5336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 13 19:41:52 UTC+0800 2020
5/5336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR BMH
Configuration: 336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i03885522
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
Illustration 1 g02131413
1/8336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 1. Attach Tooling (A) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 20 kg (45 lb). Remove bolts (1) and cover (2).
Illustration 2 g02131414
2. Remove plate (3) from cover (2).
Illustration 3 g02131415
3. Remove sun gear (4), spacer (5), and planetary gear assembly (6).
2/8336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 4 g02131875
4. Remove retaining ring (7), washer (8), planetary gear (9), roller bearing (11), and washer
(12) from carrier assembly (13).
5. Remove retaining ring (10) and sun gear (14) from carrier assembly (13).
Illustration 5 g02131876
6. Remove spacer (16).
7. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (15). The weight
of planetary gear assembly (15) is approximately 32 kg (70 lb). Remove planetary gear
assembly (15).
3/8336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 6 g02131877
8. Drive spring pin (17) into planetary shaft (18) with a suitable hammer and a suitable punch.
9. Remove planetary shaft (18), washer (20), roller bearing (20), planetary gear (23), and
washer (24) from the carrier assembly (21).
10. Remove spring pin (17) from planetary shaft (18) with a suitable hammer and a suitable
punch.
11. Remove retaining ring (19) and sun gear (25) from carrier assembly (21).
Illustration 7 g02131878
12. Remove spacer (26).
13. Attach Tooling (A) and a suitable lifting device to ring gear (27). The weight of ring gear
(27) is approximately 70 kg (155 lb). Remove bolts (28) and ring gear (27).
4/8336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 8 g02131879
14. Remove O-ring seal (29).
15. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (30). The weight
of planetary gear assembly (30) is approximately 57 kg (125 lb). Remove planetary gear
assembly (30).
Illustration 9 g02131881
16. Drive spring pin (31) into planetary shaft (32) with a suitable hammer and a suitable punch.
17. Remove planetary shaft (32), washer (33), roller bearings (35), planetary gear (36), and
washer (36) from the carrier assembly (34).
18. Remove spring pin (31) from planetary shaft (32) with a suitable hammer and a suitable
punch.
5/8336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 10 g02131882
Illustration 11 g02131885
19. Remove bolts (38). Use Tooling (B) in order to remove gear (39).
Illustration 12 g02131886
20. Remove shims (40).
6/8336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 13 g02131887
21. Attach Tooling (C) and a suitable lifting device to sprocket housing (41). The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Remove sprocket housing (41) and
roller bearing (42).
Illustration 14 g02131888
22. Remove bearing races (43) and Duo-Cone seal (44) from sprocket housing (41).
7/8336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 15 g02132155
23. Remove Duo-Cone seal (45) and roller bearing (47) from motor housing (48). The weight of
motor housing (48) is approximately 91 kg (200 lb).
24. If necessary, remove dowels (46) from motor housing (48).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 13 19:42:48 UTC+0800 2020
8/8336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR BMH
Configuration: 336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i05103849
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
D 5P-3931 Anti-Seize Compound -
E 1U-9895 Crossblock 1
F 6V-2012 Depth Micrometer 1
G 6V-7059 Micrometer () 1
H - Loctite 242 -
J 6V-2055 Grease -
K - Loctite 17430 -
L 8T-9206 Seal Installer 1
1/12336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 1 g02132155
1. Apply Tooling (D) to the surface of dowels (46) . Install dowels (46) .
2. Raise the temperature of roller bearing (47) . Install the roller bearing (47) on motor housing
(48) .
3. Install Duo-Cone seal (45) .
Illustration 2 g02131888
4. Lower the temperature of bearing races (43) . Install bearing races (43) in sprocket housing
(41) .
5. Install Duo-Cone seal (44) .
2/12336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. Illustration 3 g02131887
6. Attach Tooling (C) and a suitable lifting device to sprocket housing (41) . The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Install sprocket housing (41) .
7. Raise the temperature of roller bearing (42) . Install the roller bearing (42) .
Illustration 4 g02135728
3/12336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 5 g02134214
8. Use Tooling (E) and a suitable press in order to apply force to roller bearing (42) . Apply a
force of 4000 kg (8818 lb) to the top of Tooling (E) . Rotate sprocket housing (41) in order
to seat the roller bearings.
9. Reduce the force on top of Tooling (E) to 3000 ± 300 kg (6614 ± 661 lb). Use Tooling (F)
in order to measure Dimension (X) . Record Dimension (X) .
4/12336E L Excavators BMH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...