This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavators. The disassembly procedure involves removing 28 different components of the travel motor including the head, port plate, bearings, brake piston, plates, friction discs, and seals. The assembly procedure instructs putting the travel motor back together in the reverse order and notes the importance of cleanliness, applying lubricant to parts, and ensuring correct alignment of components.
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. It outlines 28 steps to disassemble the travel motor by removing components like the head, springs, seals, brake piston, and bearings. It then lists 19 steps for reassembling the travel motor, replacing all seals and applying thread lock compound as needed. Precise alignment of parts is emphasized for proper reassembly.
Caterpillar cat 326 d2 l excavator (prefix jfl) service repair manual (jfl000...fjsekdmmeed
This document provides instructions for disassembling and assembling the travel motor of an excavator model 326D2 L. The disassembly procedure involves removing 28 different components of the travel motor in sequential order, including the head, port plate, springs, brake piston, plates, seals, and housing cover. The assembly procedure instructs installing these same components in reverse order, noting that all seals and gaskets must be replaced and components cleaned before assembly. Proper alignment and torque specifications are identified.
Caterpillar cat 328 d lcr excavator (prefix gtn) service repair manual (gtn00...fjsekdmmeed
The document provides instructions for disassembling the final drive of a 328D LCR excavator. It lists the required tools and presents a step-by-step process to remove parts such as gears, shafts, bearings, seals, and housings. Detailed illustrations accompany each step to show how to properly disassemble the various components using specialized tools like link brackets, forcing bolts, and pullers. The goal is to fully separate all parts of the final drive assembly for maintenance or repair purposes.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...fjkskedmme
The document provides instructions for disassembling a final drive component from an excavator. It lists the required tools and gives step-by-step instructions to remove the final drive housing, gears, shafts, seals, and other internal parts. Detailed illustrations accompany each step. Disassembly involves removing retaining rings, gears, shafts, bearings, seals, and other parts from the housing using various tools, including a press, hammer, and pullers. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 328 d lcr excavator (prefix mkr) service repair manual (mkr00...fjsekdmmeed
The document provides instructions for disassembling the final drive of a 328D LCR excavator. It lists the required tools and gives step-by-step instructions to remove parts like the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Detailed illustrations are provided to show how to remove each component, and notes on weights and cleaning are included. The overall process involves using various tools to remove fasteners and separate the final drive into its individual parts.
Caterpillar cat 325 d excavator (prefix pke) service repair manual (pke00001 ...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of an excavator. Key steps include:
1) Removing the final drive assembly and marking parts for reinstallation.
2) Disassembling components like gears, bearings, and seals.
3) Cleaning all parts thoroughly before assembly to prevent dirt from entering mechanisms.
4) Assembling components and pressing bearings into place, applying the proper preload using shims.
Caterpillar cat m318 d wheeled excavator (prefix p8l) service repair manual (...fjjsjeusekkekm
The document provides instructions for disassembling and assembling the rear axle of a M318D wheeled excavator. It lists 23 steps for disassembly, which include removing the carrier housing, planetary gears, brake discs, and hub. It then lists 28 steps for reassembly, covering installing thrust washers, planetary gears, brake discs, ring gear housing, seals, and bolts. Tools required include retaining ring pliers, drivers, spanners, pry bars, pullers, and torque wrenches. Proper torque specifications and clearance measurements are also provided.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. It outlines 28 steps to disassemble the travel motor by removing components like the head, springs, seals, brake piston, and bearings. It then lists 19 steps for reassembling the travel motor, replacing all seals and applying thread lock compound as needed. Precise alignment of parts is emphasized for proper reassembly.
Caterpillar cat 326 d2 l excavator (prefix jfl) service repair manual (jfl000...fjsekdmmeed
This document provides instructions for disassembling and assembling the travel motor of an excavator model 326D2 L. The disassembly procedure involves removing 28 different components of the travel motor in sequential order, including the head, port plate, springs, brake piston, plates, seals, and housing cover. The assembly procedure instructs installing these same components in reverse order, noting that all seals and gaskets must be replaced and components cleaned before assembly. Proper alignment and torque specifications are identified.
Caterpillar cat 328 d lcr excavator (prefix gtn) service repair manual (gtn00...fjsekdmmeed
The document provides instructions for disassembling the final drive of a 328D LCR excavator. It lists the required tools and presents a step-by-step process to remove parts such as gears, shafts, bearings, seals, and housings. Detailed illustrations accompany each step to show how to properly disassemble the various components using specialized tools like link brackets, forcing bolts, and pullers. The goal is to fully separate all parts of the final drive assembly for maintenance or repair purposes.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...fjkskedmme
The document provides instructions for disassembling a final drive component from an excavator. It lists the required tools and gives step-by-step instructions to remove the final drive housing, gears, shafts, seals, and other internal parts. Detailed illustrations accompany each step. Disassembly involves removing retaining rings, gears, shafts, bearings, seals, and other parts from the housing using various tools, including a press, hammer, and pullers. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 328 d lcr excavator (prefix mkr) service repair manual (mkr00...fjsekdmmeed
The document provides instructions for disassembling the final drive of a 328D LCR excavator. It lists the required tools and gives step-by-step instructions to remove parts like the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Detailed illustrations are provided to show how to remove each component, and notes on weights and cleaning are included. The overall process involves using various tools to remove fasteners and separate the final drive into its individual parts.
Caterpillar cat 325 d excavator (prefix pke) service repair manual (pke00001 ...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of an excavator. Key steps include:
1) Removing the final drive assembly and marking parts for reinstallation.
2) Disassembling components like gears, bearings, and seals.
3) Cleaning all parts thoroughly before assembly to prevent dirt from entering mechanisms.
4) Assembling components and pressing bearings into place, applying the proper preload using shims.
Caterpillar cat m318 d wheeled excavator (prefix p8l) service repair manual (...fjjsjeusekkekm
The document provides instructions for disassembling and assembling the rear axle of a M318D wheeled excavator. It lists 23 steps for disassembly, which include removing the carrier housing, planetary gears, brake discs, and hub. It then lists 28 steps for reassembly, covering installing thrust washers, planetary gears, brake discs, ring gear housing, seals, and bolts. Tools required include retaining ring pliers, drivers, spanners, pry bars, pullers, and torque wrenches. Proper torque specifications and clearance measurements are also provided.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. The disassembly procedure involves removing 28 different components of the travel motor including the head, port plate, bearings, brake piston, plates, seals and housing cover. Corresponding assembly instructions are also provided, specifying the use of various tools and noting that all seals and gaskets must be replaced. Cleanliness is emphasized throughout the assembly process.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdf8ufjsekddm8u
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Cleanliness is emphasized during disassembly and assembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdf8ufjsekddm8u
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar cat 326 d2 l excavator (prefix kgy) service repair manual (kgy000...fjjskdmnenemm
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, port plate, bearings, brake piston, plates, seals and more. Cleanliness is important during assembly and O-rings and gaskets should be replaced.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff7usuejkdkddm3
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff7usuejkdkddm3
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. The disassembly procedure involves removing 28 different components of the travel motor including the head, port plate, bearings, brake piston, plates, seals, and housing cover. Corresponding assembly instructions are also provided and specify cleaning and lubricating parts, as well as torques for certain bolts. Safety notices are included regarding spring force and cleanliness during the repair process.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfufjksemd8ujd
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfufjksemd8ujd
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, port plate, bearings, brake piston, plates, seals and more. Cleanliness is important during assembly and O-rings and gaskets should be replaced.
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, port plate, bearings, brake piston, plates, seals and more. Cleanliness is important during assembly and O-rings and gaskets should be replaced.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfkm7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfkm7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfjdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. The disassembly procedure involves removing 28 different components of the travel motor including the head, port plate, bearings, brake piston, plates, seals and housing cover. Corresponding assembly instructions are also provided, specifying the use of various tools and noting that all seals and gaskets must be replaced. Cleanliness is emphasized throughout the assembly process.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfjdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfprmy389342
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfprmy389342
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Cleanliness is emphasized during disassembly and assembly.
Caterpillar cat 326 d2 l excavator (prefix mgw) service repair manual (mgw000...fjsjekkmdmme
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. It outlines 28 steps to disassemble the travel motor by removing components like the head, springs, seals, brake piston, and bearings. It then lists 19 steps for reassembling the travel motor, replacing all seals and applying thread lock compound as needed. Precise alignment of parts is emphasized to ensure proper function when reassembled.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfshudun96087
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavators. The disassembly procedure involves 28 steps to remove components like the head, brake piston, rotating assembly, seals, and bearings. The assembly procedure reverses the disassembly steps and includes notes on cleaning parts and applying thread lock compound during assembly. Tools required include various adapters, bolts, eyebolts, and pullers to remove components in a specific sequence.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfshudun96087
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavators. The disassembly procedure involves 28 steps to remove components like the head, brake piston, rotating assembly, seals, and bearings. The assembly procedure reverses the disassembly steps and includes notes on cleaning parts and applying thread lock compound during assembly. Tools required are listed for both procedures.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfyfbr995309
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavators. The disassembly procedure involves 28 steps to remove components like the head, brake piston, rotating assembly, seals, and bearings. The assembly procedure reverses the disassembly steps and includes notes on cleaning parts and applying thread lock compound during assembly. Tools required are listed for both procedures.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfyfbr995309
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavators. The disassembly procedure involves 28 steps to remove components like the head, port plate, bearings, brake piston, rotating assembly, seals and more. The assembly procedure describes 23 steps and involves installing components in reverse order while ensuring proper alignment and torque specifications are followed. Tools required are listed for both procedures.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 105 gexl tractor service ...fjsjekkmdmme
This document contains parts listings and technical specifications for engine components. It includes identification numbers, quantities, replacement kits, and notes for various parts like cylinders, pistons, gears, valves, and other internal engine pieces. Measurements and tolerances are provided for wear specifications. References are made to other part numbers for related components.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 100 gexl tractor service ...fjsjekkmdmme
This document contains parts information for an engine, including:
1. Component names, part numbers, quantities and reference numbers.
2. Identification information for the engine model and OEM.
3. Notes on replacement parts, reference numbers, quantities for tractors sold, and color coding.
More Related Content
Similar to Caterpillar cat 326 d2 excavator (prefix kgy) service repair manual (kgy00001 and up)
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. The disassembly procedure involves removing 28 different components of the travel motor including the head, port plate, bearings, brake piston, plates, seals and housing cover. Corresponding assembly instructions are also provided, specifying the use of various tools and noting that all seals and gaskets must be replaced. Cleanliness is emphasized throughout the assembly process.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdf8ufjsekddm8u
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Cleanliness is emphasized during disassembly and assembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdf8ufjsekddm8u
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar cat 326 d2 l excavator (prefix kgy) service repair manual (kgy000...fjjskdmnenemm
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, port plate, bearings, brake piston, plates, seals and more. Cleanliness is important during assembly and O-rings and gaskets should be replaced.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff7usuejkdkddm3
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff7usuejkdkddm3
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. The disassembly procedure involves removing 28 different components of the travel motor including the head, port plate, bearings, brake piston, plates, seals, and housing cover. Corresponding assembly instructions are also provided and specify cleaning and lubricating parts, as well as torques for certain bolts. Safety notices are included regarding spring force and cleanliness during the repair process.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfufjksemd8ujd
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfufjksemd8ujd
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, port plate, bearings, brake piston, plates, seals and more. Cleanliness is important during assembly and O-rings and gaskets should be replaced.
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, port plate, bearings, brake piston, plates, seals and more. Cleanliness is important during assembly and O-rings and gaskets should be replaced.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfkm7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfkm7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfjdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. The disassembly procedure involves removing 28 different components of the travel motor including the head, port plate, bearings, brake piston, plates, seals and housing cover. Corresponding assembly instructions are also provided, specifying the use of various tools and noting that all seals and gaskets must be replaced. Cleanliness is emphasized throughout the assembly process.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfjdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfprmy389342
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfprmy389342
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Cleanliness is emphasized during disassembly and assembly.
Caterpillar cat 326 d2 l excavator (prefix mgw) service repair manual (mgw000...fjsjekkmdmme
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. It outlines 28 steps to disassemble the travel motor by removing components like the head, springs, seals, brake piston, and bearings. It then lists 19 steps for reassembling the travel motor, replacing all seals and applying thread lock compound as needed. Precise alignment of parts is emphasized to ensure proper function when reassembled.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfshudun96087
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavators. The disassembly procedure involves 28 steps to remove components like the head, brake piston, rotating assembly, seals, and bearings. The assembly procedure reverses the disassembly steps and includes notes on cleaning parts and applying thread lock compound during assembly. Tools required include various adapters, bolts, eyebolts, and pullers to remove components in a specific sequence.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfshudun96087
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavators. The disassembly procedure involves 28 steps to remove components like the head, brake piston, rotating assembly, seals, and bearings. The assembly procedure reverses the disassembly steps and includes notes on cleaning parts and applying thread lock compound during assembly. Tools required are listed for both procedures.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfyfbr995309
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavators. The disassembly procedure involves 28 steps to remove components like the head, brake piston, rotating assembly, seals, and bearings. The assembly procedure reverses the disassembly steps and includes notes on cleaning parts and applying thread lock compound during assembly. Tools required are listed for both procedures.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdfyfbr995309
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavators. The disassembly procedure involves 28 steps to remove components like the head, port plate, bearings, brake piston, rotating assembly, seals and more. The assembly procedure describes 23 steps and involves installing components in reverse order while ensuring proper alignment and torque specifications are followed. Tools required are listed for both procedures.
Similar to Caterpillar cat 326 d2 excavator (prefix kgy) service repair manual (kgy00001 and up) (20)
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 105 gexl tractor service ...fjsjekkmdmme
This document contains parts listings and technical specifications for engine components. It includes identification numbers, quantities, replacement kits, and notes for various parts like cylinders, pistons, gears, valves, and other internal engine pieces. Measurements and tolerances are provided for wear specifications. References are made to other part numbers for related components.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 100 gexl tractor service ...fjsjekkmdmme
This document contains parts information for an engine, including:
1. Component names, part numbers, quantities and reference numbers.
2. Identification information for the engine model and OEM.
3. Notes on replacement parts, reference numbers, quantities for tractors sold, and color coding.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 80 gexl tractor service r...fjsjekkmdmme
This document provides component part listings and information for an engine. It lists individual part numbers, part names, applicable serial number ranges, replacement part numbers, and other technical specifications over multiple pages of documentation.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 75 ge tractor service rep...fjsjekkmdmme
This document provides information on components for an engine. It lists 40 individual components, including cylinders, pistons, gears, shafts, plates, and other parts. Each component includes details like the part number, quantity needed, and reference numbers. The document also indicates that some components are part of larger assemblies and provides replacement part information.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f105 fgexl tractor service ...fjsjekkmdmme
This document contains information about engine part replacements and repair kits. It lists part numbers, descriptions, and whether they are for overhaul or replacement. It provides technical information for engines, including serial number ranges that parts are applicable for. It also includes quantity information for parts included in kits.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f85 fgexl tractor service r...fjsjekkmdmme
This document contains parts listings and repair instructions for engine components. It includes listings of parts needed for repairs or replacements, identifying information for each part like part numbers and names, quantities needed, and repair steps or kits associated with each part. Tasks identified include repairs, overhauls, replacements, and timing specifications.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f80 fge tractor service rep...fjsjekkmdmme
This document contains information about engine parts including identification numbers, descriptions, and repair specifications. It lists parts needed for overhauls, replacements, and repairs of engine components like cylinders, crankshafts, heads, valves, pistons, gears, and other internal engine parts. Specifications include torque settings, fit tolerances, and serial number ranges for applicability of certain parts.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f75 fgexl tractor service r...fjsjekkmdmme
This document contains parts lists and repair instructions for engine components. It lists individual part numbers, descriptions, quantities, and repair times for replacing or overhauling parts like pistons, rods, bearings, gaskets, valves, pumps, and more. Each part is identified by its number and specifications are provided for replacement parts that may vary by size.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f70 fge tractor service rep...fjsjekkmdmme
This document contains parts lists and repair instructions for engines. It lists individual engine parts along with relevant repair times for tasks like replacement, overhaul, and more. Parts are identified with reference numbers and include details like kits, bushings, gears, plugs, and other engine components. Technician and repair times are provided for each task.
Mc cormick f top restyling (2010 ) - rp55 - f100gexl tractor service repair ...fjsjekkmdmme
This document provides parts information for various engine components. It lists part numbers, descriptions, applicable serial number ranges, and other technical specifications for items like pistons, connecting rods, cylinder heads, pumps, sensors and housing parts. It indicates that some components are part of larger assemblies and notes replacement part designations or color coding for organized replacement.
Komatsu h185 s hydraulic shovel service repair manual (sn 6111)fjsjekkmdmme
This shop manual provides proprietary information for maintaining and repairing the Komatsu H185S hydraulic shovel. It describes the continuous improvement process used by Komatsu to update their products and documentation. Users are advised to check with their distributor for the latest revision of the manual, as revisions may be made without notice due to Komatsu's ongoing research and development efforts.
Komatsu d575 a 2 dozer bulldozer service repair manual (sn 10001 and up)fjsjekkmdmme
This shop manual provides information for servicing and repairing the D575A-2 machine model. The manual contains safety precautions and general procedures for removal and installation of components. Key points include:
- The D575A-2 uses the SA12V170-1 engine which is detailed in the 12V170-1 Series Engine Shop Manual.
- Safety precautions must always be followed when servicing equipment to prevent injury.
- Procedures are provided for removal and installation of components like the power train oil cooler, hydraulic cooler, fuel injection pump, water pump, turbocharger, and cylinder head.
- Components should be installed in reverse order of removal and fluids refilled
Komatsu d475 a 2 dozer bulldozer service repair manual (sn 10201 and up)fjsjekkmdmme
The document provides instructions for removing and installing various components of an excavator. It describes removing the torque converter cooler assembly which includes disconnecting tubes and hoses, draining oil, and removing mounting bolts. It also describes installing the assembly in reverse order and refilling with oil. Similarly, it provides removal and installation instructions for other assemblies like the fuel injection pump, water pump, turbocharger, and cylinder head.
Komatsu d65 wx 16 dozer bulldozer service repair manual sn 80001 and upfjsjekkmdmme
The document is a shop manual that provides specifications, maintenance procedures, and troubleshooting information for Bulldozer models D65EX-16, D65PX-16, and D65WX-16. It contains sections on the engine and cooling system, power train, undercarriage, hydraulic system, electrical system, and troubleshooting codes. Tables provide the serial numbers, specifications, weights, fluids, and tightening torques. The manual also includes maintenance standards, safety notices, and testing and adjusting procedures.
Komatsu d65 wx 15e0 dozer bulldozer service repair manual sn 69001 and upfjsjekkmdmme
This document provides specifications and service information for Bulldozer models D65EX-15E0, D65PX-15E0, and D65WX-15E0, including serial numbers 69001 and up. It contains sections on specifications, structure and function, maintenance standards, testing and adjusting procedures, and troubleshooting. The document is organized into multiple sections covering various systems of the bulldozers.
Komatsu d65 px 16 dozer bulldozer service repair manual sn 80001 and upfjsjekkmdmme
This document provides specifications, maintenance procedures, and troubleshooting information for Bulldozer models D65EX-16, D65PX-16, and D65WX-16. It includes sections on engine and cooling systems, power train, undercarriage, hydraulic systems, electrical systems, and work equipment. Troubleshooting tables provide possible causes and solutions for various error codes related to transmission components, sensors, engine controls, and electrical circuits.
Komatsu d65 px 15e0 dozer bulldozer service repair manual sn 69001 and upfjsjekkmdmme
This document provides specifications and maintenance information for Bulldozer models D65EX, D65PX, and D65WX-15E0. It includes sections on specifications, structure and function, maintenance standards, testing and adjusting procedures, and troubleshooting. Serial numbers for the models start at 69001. The document contains diagrams, specifications, technical data, and instructions for servicing and repairing components of the bulldozers.
Komatsu d65 px 12 dozer bulldozer service repair manual sn 65275 and upfjsjekkmdmme
This shop manual provides instructions for servicing a Komatsu D65EX/PX-12 excavator. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. Safety precautions are emphasized, including wearing protective equipment and blocking the excavator before performing any work. The document provides step-by-step instructions for removing and installing components like the fuel supply pump assembly and nozzle holder assembly. Tightening torques are specified for all fasteners.
Komatsu d65 ex 16 dozer bulldozer service repair manual sn 80001 and upfjsjekkmdmme
The document is a shop manual that provides specifications, maintenance procedures, and troubleshooting information for Bulldozer models D65EX-16, D65PX-16, and D65WX-16. It contains sections on the engine and cooling system, power train, undercarriage, hydraulic system, electrical system, and troubleshooting. Tables provide the serial numbers, specifications, maintenance standards, tightening torques, and failure codes. The manual also includes diagrams of systems and components.
Komatsu d65 ex 15e0 dozer bulldozer service repair manual sn 69001 and upfjsjekkmdmme
This document provides specifications and maintenance information for Bulldozer models D65EX, D65PX, and D65WX-15E0. It includes sections on specifications, structure and function, maintenance standards, testing and adjusting procedures, and troubleshooting. Serial numbers for the models start at 69001. The document contains diagrams, specifications, technical data, and instructions for servicing and repairing components of the bulldozers.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326D2 EXCAVATOR KGY
Configuration: 326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326D2, 329D2 and 330D2 Excavators Machine Systems
Media Number -UENR6134-08 Publication Date -01/09/2018 Date Updated -12/09/2018
i03124522
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- Threaded RodM12 x 1.75 by 250 mm (10 in) long 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
A. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
1/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
Illustration 1 g00887295
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
Spring force can cause personal injury or death.
Do not repair until you have read the Operation and Maintenance
Manual.
2/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 4. Remove bolts (1) .
5. Remove head (2) from the body of the travel motor.
Illustration 2 g00887302
6. Remove O-ring seal (3) , port plate (4) , and bearing (5) .
Illustration 3 g00887311
7. Remove O-ring seals (6) . Remove springs (7) .
3/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 4 g00887331
Illustration 5 g00890074
This is an example of the use of Tooling (B) .
8. Place a shop towel over brake piston (8) . Retain brake piston (8) with Tooling (B) . Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y) . Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
4/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 6 g00887336
9. Remove seal (9) and backup ring (10) from the brake piston.
10. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 7 g00887355
11. Remove plates (13) and friction discs (14) .
Illustration 8 g00887401
5/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 9 g00887405
12. Install Tooling (C) into shaft (15) . Use a prybar to remove the rotating assembly (16) from
the housing.
13. Remove Tooling (C) from shaft (15) .
Illustration 10 g00887424
14. Remove shaft (15) from rotating assembly (16) .
6/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 11 g00887426
15. Use Tooling (D) in order to remove retaining ring (17) from shaft (15) .
Illustration 12 g00887445
16. Install shaft (15) into a suitable press. Remove bearing race (18) from the shaft.
Illustration 13 g00887463
17. Rotate shaft (15) . Install shaft (15) into a suitable press. Install Tooling (E) . Remove
bearing race (19) from shaft (15) .
7/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 14 g00887501
18. Remove cam plate (20) from barrel assembly (21) .
Illustration 15 g00887520
19. Remove piston assemblies and retainer plate (22) from barrel assembly (21) .
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
8/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 16 g00887558
20. Remove ball (23) and springs (24) .
Illustration 17 g00887578
21. Remove bearing (25) .
22. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
23. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27) .
24. Remove seal (28) .
9/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 19 g00887619
25. Remove bolts (29) and cover (30) .
Illustration 20 g00887729
26. Remove seal (31) and backup ring (32) .
Illustration 21 g00887754
27. Remove piston actuator (33) and seal (34) .
10/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 ...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 22 g00887762
28. Remove O-ring seal (35) from the housing of the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 15 18:55:52 UTC+0800 2020
11/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 ...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326D2 EXCAVATOR KGY
Configuration: 326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326D2, 329D2 and 330D2 Excavators Machine Systems
Media Number -UENR6134-08 Publication Date -01/09/2018 Date Updated -12/09/2018
i03124523
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- Threaded Rod M12 x 1.75 X 250 mm (10 in) long 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G 9S-3263 Thread Lock Compound -
Note: Replace all O-ring seals and gaskets. Apply a light film of"10W" oil to all components
before assembly.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause trouble later. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement. All disassembly and all assembly procedures
1/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. must be performed on a clean work surface and in a clean hydraulic area. Keep cleaned parts
covered and protected at all times.
Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33) .
2/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 3 g00887729
3. Install backup ring (32) and seal (31) .
Illustration 4 g00887619
4. Install cover (30) and bolts (29) . Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
3/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 5. Apply Tooling (G) to the mating surface of seal (28) . Use Tooling (E) in order to install
seal (28) .
6. Use Tooling (F) in order to install retaining ring (27) .
Illustration 6 g00887578
7. Rotate the housing.
8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25) .
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
4/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 10. Install springs (24) into the barrel. Install ball (23) onto springs (24) .
Illustration 8 g00887520
11. Install piston assemblies and retainer plate (22) into barrel assembly (21) .
Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Install cam plate (20) onto barrel assembly (21) .
5/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15) .
Illustration 11 g00887426
14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15) .
Illustration 12 g00888710
6/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 15. Install bearing race (18) onto shaft (15) .
Note: Bearing race (18) must contact retaining ring (17) .
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15) . Install shaft (15) into rotating assembly (16) .
17. Place the pump housing into Tooling (A) .
Illustration 14 g00887401
18. Use Tooling (C) in order to install rotating assembly (16) into the housing.
7/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 15 g00887501
Illustration 16 g00887578
19. The notches in cam plate (20) must align with keys (26) . The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
20. Install plates (13) and friction discs (14) into the housing.
8/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8) .
24. Install brake piston (8) into the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level in
order to prevent damage to the O-ring seals.
9/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6) .
Illustration 21 g00887302
26. Install O-ring seal (3) , port plate (4) , and bearing (5) .
Illustration 22 g00887295
27. Install head (2) onto the body of the travel motor.
10/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 ...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1) . Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By: Install the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 15 18:56:48 UTC+0800 2020
11/11326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 ...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326D2 EXCAVATOR KGY
Configuration: 326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326D2, 329D2 and 330D2 Excavators Machine Systems
Media Number -UENR6134-08 Publication Date -01/09/2018 Date Updated -12/09/2018
i03808350
Travel Motor - Install
SMCS - 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
1/4326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 1 g00878123
2. Install new O-ring seal (6) . Apply clean hydraulic oil on the O-ring seal.
Illustration 2 g00707267
3. Attach a suitable lifting device to travel motor (4) , as shown.
4. The weight of the travel motor is approximately 57 kg (125 lb).
Illustration 3 g00878121
2/4326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. 5. Carefully install travel motor (4) onto Tooling (A) . Slide the travel motor into the final
drive.
6. Install one of three bolts (5) that secures the travel motor to the final drive.
7. Remove Tooling (A) .
Illustration 4 g00707275
Typical example
8. Install remaining bolts (2) .
9. Connect hose assembly (3) . Connect hose assembly (1) .
10. Fill the final drive with oil.
ReferenceRefer to Operation and Maintenance Manual, "Lubricant Viscosities" for the
proper oil viscosity.
ReferenceRefer to Operation and Maintenance Manual, "Final Drive Oil Level - Check" for
the correct filling procedure.
11. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return
filter.
Note: High efficiency filters should not be run for more than 250 hours before you change
back to the standard filters.
12. Obtain a hydraulic oil sample from the main S·O·S port.
ReferenceRefer to Operation and Maintenance Manual, "Sampling Interval and Location of
Sampling Valve" for the correct location.
13. If the S·O·S sample exceeds ISO 18/15, flush the hydraulic system.
ReferenceRefer to Contamination Control Guidelines, SEBF8436, "Hydraulic System
Flushing Procedure for 322C Hydraulic Excavators" for further information.
3/4326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. End By: Install the travel brake valve. Refer to Disassembly and Assembly, "Travel Brake Valve
- Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 15 18:57:43 UTC+0800 2020
4/4326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326D2 EXCAVATOR KGY
Configuration: 326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326D2, 329D2 and 330D2 Excavators Machine Systems
Media Number -UENR6134-08 Publication Date -01/09/2018 Date Updated -12/09/2018
i05453056
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-7611 Handle As 2
8S-7615 Pin As 2
283-1495 Stand Assembly 2
B 439-3939 Link Bracket As 2
C
154-6184 Forcing Bolt (M 20) 2
154-6185(1)
Forcing Bolt (M 24) 2
(1)
For Use on 329 and 330 sales models
Start By:
a. Separate the track assembly.
b. Remove the travel motor.
1/3326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 En...
2020/9/15https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...