The document provides instructions for removing the fuel injection pump from a 320D2 excavator with a C7.1 engine. Key steps include:
1. Turning the fuel supply and battery disconnect switch to the off position.
2. Using tools to lock the crankshaft and camshaft in position.
3. Disconnecting fuel lines from the pump and capping the lines.
4. Removing mounting bolts and carefully removing the fuel injection pump.
The document emphasizes safety precautions for working on the high pressure fuel system and provides illustrations of the pump and surrounding components.
Jcb 67 c 1 mini excavator service repair manual (sn from 1912903 to 1913903)fusefjjskekemm
This service manual provides instructions for servicing an excavator engine. It contains sections on general information, components, operation, maintenance, removal and installation procedures for the rocker and fittings assembly. The summary focuses on the rocker and fittings section, which describes the components of the rocker assembly such as the rocker arms, shaft and springs. It provides details on how the assembly works, lubrication paths, and maintenance checks. Procedures for removing, installing, disassembling and assembling the rocker assembly are included.
Jcb 325 t skid steer loader service repair manual sn from 2476302 to 2477300fujsjefjskekmem
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures. Precautions are given such as allowing the engine to cool before working on it and using lifting devices due to the heavy weight of components.
This document provides the installation procedure for a swing motor on excavator models 320D2 and 320D2 L in 30 steps. It details cleaning and preparing the mating surfaces, lifting and attaching the swing motor, connecting multiple hose and harness assemblies using new O-rings, and ensuring the drain valve is closed at the end of installation. Required tools include a vacuum cap, link brackets, and gasket sealant. Safety notices warn of spring hazards and containing fluids.
Jcb 55 z 1 mini excavator service repair manual (perkins engine)fusefjjskekemm
This service manual provides instructions for servicing JCB machines 55Z-1 and 57C-1. It contains sections on the machine components, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, driveline, hydraulics, electrical, fasteners, consumables, and after sales. The section on the engine includes instructions for servicing the valves, with details on checking valve lash, depth, and condition, as well as adjusting lash and removing and installing valves. Technical specifications are provided for valve components and clearances.
Jcb 3 cx t2 t3 backhoe loader service repair manual from 2615002 to 2616002fusefjjskekemm
This service manual provides instructions for servicing the valves on a backhoe loader engine. It describes how the valve train components operate and the process for measuring and adjusting valve clearances. The procedure involves using special tools to position the engine, lock the valve tappets, and measure clearance with a dial indicator. Clearances are adjusted by turning the tappet adjusters if needed. Instructions are also provided for removing and installing the valves, which requires compressing the springs and removing retaining collets.
Asv posi track pt-80 track loader parts catalogue manualfujskekfmsme
This document is a parts manual for a PT-80 Rubber Track Loader. It lists 26 sections that cover different assemblies and components of the loader, including the cab assembly, cab interior assembly, hydraulic cylinders, wire harnesses, and o-rings. It provides part numbers for replacement parts for each assembly and component. Serial number ranges are provided to indicate which part numbers apply to different machine models.
Jcb tlt 25 g teletruk (variable reach truck) service repair manual sn 2498451...fujsjefjskekmem
This service manual provides instructions for servicing the Teletruk (variable reach truck) models TLT 25G and TLT 30G. It contains sections covering the entire machine including the engine, fuel and exhaust systems, cooling system, brake system, hydraulic system, electrical system, and other components. The manual provides health and safety warnings and instructions for tasks such as removing and installing parts, fault finding, and storing or recommissioning the machine. It also includes technical specifications and diagrams to identify engine components.
Human: Thank you for the summary. You captured the key details about what the document contains and its purpose while keeping it concise.
Caterpillar cat 120 h motor grader (prefix 5fm) service repair manual (5fm000...fusefjjskekemm
- The document provides instructions for removing and installing the camshaft on a 120H Motor Grader with a 3116 engine. It describes removing components like the governor and covers, then turning the crankshaft to align marks before removing the camshaft, gear, and bearings. Installation is the reverse of removal.
- Instructions are given to remove and install the camshaft gear by pressing it off the camshaft and heating it to 315°C before reinstalling.
- The procedure to remove and install camshaft bearings uses a special tool and orients the oil holes during installation.
Jcb 67 c 1 mini excavator service repair manual (sn from 1912903 to 1913903)fusefjjskekemm
This service manual provides instructions for servicing an excavator engine. It contains sections on general information, components, operation, maintenance, removal and installation procedures for the rocker and fittings assembly. The summary focuses on the rocker and fittings section, which describes the components of the rocker assembly such as the rocker arms, shaft and springs. It provides details on how the assembly works, lubrication paths, and maintenance checks. Procedures for removing, installing, disassembling and assembling the rocker assembly are included.
Jcb 325 t skid steer loader service repair manual sn from 2476302 to 2477300fujsjefjskekmem
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures. Precautions are given such as allowing the engine to cool before working on it and using lifting devices due to the heavy weight of components.
This document provides the installation procedure for a swing motor on excavator models 320D2 and 320D2 L in 30 steps. It details cleaning and preparing the mating surfaces, lifting and attaching the swing motor, connecting multiple hose and harness assemblies using new O-rings, and ensuring the drain valve is closed at the end of installation. Required tools include a vacuum cap, link brackets, and gasket sealant. Safety notices warn of spring hazards and containing fluids.
Jcb 55 z 1 mini excavator service repair manual (perkins engine)fusefjjskekemm
This service manual provides instructions for servicing JCB machines 55Z-1 and 57C-1. It contains sections on the machine components, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, driveline, hydraulics, electrical, fasteners, consumables, and after sales. The section on the engine includes instructions for servicing the valves, with details on checking valve lash, depth, and condition, as well as adjusting lash and removing and installing valves. Technical specifications are provided for valve components and clearances.
Jcb 3 cx t2 t3 backhoe loader service repair manual from 2615002 to 2616002fusefjjskekemm
This service manual provides instructions for servicing the valves on a backhoe loader engine. It describes how the valve train components operate and the process for measuring and adjusting valve clearances. The procedure involves using special tools to position the engine, lock the valve tappets, and measure clearance with a dial indicator. Clearances are adjusted by turning the tappet adjusters if needed. Instructions are also provided for removing and installing the valves, which requires compressing the springs and removing retaining collets.
Asv posi track pt-80 track loader parts catalogue manualfujskekfmsme
This document is a parts manual for a PT-80 Rubber Track Loader. It lists 26 sections that cover different assemblies and components of the loader, including the cab assembly, cab interior assembly, hydraulic cylinders, wire harnesses, and o-rings. It provides part numbers for replacement parts for each assembly and component. Serial number ranges are provided to indicate which part numbers apply to different machine models.
Jcb tlt 25 g teletruk (variable reach truck) service repair manual sn 2498451...fujsjefjskekmem
This service manual provides instructions for servicing the Teletruk (variable reach truck) models TLT 25G and TLT 30G. It contains sections covering the entire machine including the engine, fuel and exhaust systems, cooling system, brake system, hydraulic system, electrical system, and other components. The manual provides health and safety warnings and instructions for tasks such as removing and installing parts, fault finding, and storing or recommissioning the machine. It also includes technical specifications and diagrams to identify engine components.
Human: Thank you for the summary. You captured the key details about what the document contains and its purpose while keeping it concise.
Caterpillar cat 120 h motor grader (prefix 5fm) service repair manual (5fm000...fusefjjskekemm
- The document provides instructions for removing and installing the camshaft on a 120H Motor Grader with a 3116 engine. It describes removing components like the governor and covers, then turning the crankshaft to align marks before removing the camshaft, gear, and bearings. Installation is the reverse of removal.
- Instructions are given to remove and install the camshaft gear by pressing it off the camshaft and heating it to 315°C before reinstalling.
- The procedure to remove and install camshaft bearings uses a special tool and orients the oil holes during installation.
Caterpillar cat 933 c hystat track loader (prefix 4ms) service repair manual ...fujskekfmsme
The document provides instructions for installing and removing an air inlet manifold and valves on a Caterpillar 3046 engine. It describes:
1) Using various tools to compress valve springs and remove caps and keepers to access the valves and springs.
2) Checking valve springs with a spring tester and specifications.
3) Installing new gaskets and bolting the air inlet manifold, elbow, and other components in multiple steps while checking for damage.
4) Maintaining air pressure in cylinders during valve spring removal and installation to hold valves in position.
Caterpillar cat 930 r wheel loader (prefix 57z) service repair manual (57z040...fujskekfmsme
This document provides instructions for installing the fuel injection pump housing and governor on a Caterpillar 930T wheel loader. It describes:
1) Using an engine turning tool to find the top center position of the No. 1 piston by turning the flywheel and installing a bolt in a hole in the flywheel.
2) Installing fuel pump timing pins and checking that the fuel injection pump gear teeth are aligned with the timing marks on the housing.
3) Installing the fuel injection pump housing and governor, and checking that the governor shaft turns freely once assembled.
Liebherr r317 li tcd hydraulic excavator service repair manual serial no 3001...fusefjjskekemm
This service manual provides technical information for Liebherr hydraulic excavators models A 309 - R 317 Litronic TCD. It contains sections on general information, tools, technical data, maintenance guidelines, the engine, hydraulic system, electrical system, and other major components. The manual is intended for use by customer support services and includes symbols, instructions, and tips for operating and repairing the equipment. It is copyrighted and the property of Liebherr-Hydraulikbagger GmbH.
This document provides instructions for connecting and disconnecting track assemblies on a 320D2 excavator. It describes:
1. Using tools to raise the track into position and install pins and bolts to connect the track shoe.
2. Removing the front idler and recoil spring assembly as one unit by sliding them out of the track roller frame and separating them.
3. Installing the front idler and recoil spring by reversing the removal steps.
The document provides instructions for removing and installing the flywheel and crankshaft rear seal on a Caterpillar 320D2 excavator engine. The flywheel removal procedure involves removing bolts and installing guide studs to lift the flywheel off. The crankshaft rear seal is part of a sealed assembly that must be replaced if removed. Installation of the new seal involves aligning it on the crankshaft using a plastic sleeve and tool before tightening screws.
Daewoo doosan de12 diesel engine service repair manualfjsekkdmme
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the key features of the engines such as their OMEGA combustion bowl design for high efficiency and low emissions. Specifications for each engine model are provided, including power output, torque, idle speeds, and injection timing. Diagrams show the main engine components and assembly configurations in vehicles. Guidelines are given for safe and proper maintenance practices.
Caterpillar cat 312 e excavator (prefix pzl) service repair manual (pzl00001 ...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a 312E or 312E L excavator with a C4.4 engine. The key steps include:
1. Locking the crankshaft and fuel injection pump gear in position using timing pins.
2. Loosening the rocker arm inserts to fully close the valves.
3. Removing the camshaft, idler, and housing gears in the proper order while maintaining timing marks.
4. Cleaning and inspecting components before installing in reverse order while ensuring proper gear mesh and end play measurements.
Caterpillar cat 313 f excavator (prefix nlg) service repair manual (nlg00001 ...fjjskekdmmse
This document provides instructions for installing an idler gear on a C4.4 engine. It outlines 19 steps including cleaning and inspecting parts, installing locking pins to hold components in place, lubricating and installing the idler gear and hub, checking timing marks and backlash, and reinstalling covers once complete. Tools required include various pins, sockets, and indicators to aid in the installation and ensure proper timing. Proper cleaning and lubrication of parts is emphasized to prevent premature wear.
Jcb 536 t70 lp telescopic handler service repair manual sn 2336575 and upfiskefjskemem
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. Specific models covered include 526-56, 531-70, 533-105, 535-95, 536-60, and others. Safety warnings are provided throughout and procedures for removal and installation are described in detail with torque specifications.
Jcb ps760 transmission service repair manualufjjsjefkksemm
This service manual section provides information on servicing and repairing components of the JCB PS760, PS764, PS766 semi-automatic gearbox. The document covers general information, as well as procedures for clutches, solenoid valves, oil pumps, shafts, cases, and other components. Torque specifications and part numbers are included for repairs.
Hyundai hlf1518(c) 5 forklift truck service repair manualfjjskekdmmse
The document outlines the contents and structure of a service manual for a machine. It includes 8 sections that cover general information, removal/installation procedures, power train, brake, steering, hydraulic, electrical, and mast systems. Each section contains groups that break down the systems and components. The document provides an overview of the contents, structure, and intended use of the service manual to aid technicians in performing repairs correctly.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...fjjskekdmmse
The document provides instructions for removing and installing the front gear group on 312E and 312E L excavator models powered by a C4.4 engine. The removal procedure involves using various tools to lock the crankshaft, camshaft and fuel injection pump in position before removing components like the idler gears, camshaft gear, and front housing bearing. The installation procedure outlines cleaning and inspecting components before reinstalling them in reverse order of removal, ensuring proper positioning and locking of gears.
Caterpillar cat 312 b excavator (prefix 3es) service repair manual (3es00001 ...fjsekksmemm
This document provides instructions for removing and installing the engine oil bypass valve on a 312B excavator. It describes removing the engine oil pan, threaded plug, shim, spring, and spring seat from the cylinder block. It then details installing the spring seat, spring, shim, and threaded plug in the cylinder block and tightening to the specified torque. The summary also notes to test the opening pressure of the relief valve and make adjustments if needed.
Caterpillar cat 301.6 mini hydraulic excavator (prefix my6) service repair ma...fjsjekdmmeme
The document provides instructions for disassembling and assembling a blade cylinder for a 301.6 Mini Hydraulic Excavator. The disassembly procedure involves removing seals and other components from both ends of the cylinder. The assembly procedure describes installing the components in reverse order and applying the appropriate torque to fasteners. Separate sections also describe removing and installing the excavator's blade and bucket.
Caterpillar cat 320 d l excavator (prefix dhk) service repair manual (dhk0000...fkjsekksmem
This document provides instructions for removing and installing the boom cylinder on a 320D and 320D L excavator. It outlines the required tools and safety precautions. The removal process involves releasing hydraulic pressure, removing attachment points, and lifting the cylinder out of place. Reinstallation is the reverse of removal. Torque specifications are provided for correct assembly.
Caterpillar cat 312 b excavator (prefix 2kw) service repair manual (2kw00001 ...fjsekksmemm
The document provides instructions for removing and installing the valve mechanism cover on a 3054 engine. The key steps are:
1. Remove all bolts securing the valve mechanism cover to the cylinder head.
2. Remove the valve mechanism cover and gasket.
3. Install a new gasket and valve mechanism cover, securing it with the bolts. Tighten the bolts to the specified torque.
The instructions emphasize keeping parts clean and containing fluids to prevent contamination.
Kubota v3600 t-e3 b diesel engine service repair manualfusjejkdkmse
This document provides service technicians with information on servicing and maintaining various Kubota diesel engine models. It is divided into three parts covering general information, engine mechanisms, and servicing procedures.
The general section includes instructions on identifying engine models, general safety precautions, maintenance checklists, and maintenance schedules. Technicians are advised to check specific components and systems daily, every 50 hours, 250 hours, 500 hours, and longer intervals. The document also lists special tools needed for servicing tasks.
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...jfdskekdmme
The document provides instructions for removing and installing the flywheel, flywheel housing, and crankshaft rear seal of a C6.4 engine. The flywheel is removed using lifting tools and bolts, while the flywheel housing requires removal of mounting bolts and contains a oil seal. Installation follows the reverse process, ensuring clean surfaces and applying retaining compound to mating parts. Special tools are specified for removing and installing the crankshaft rear seal and wear sleeve.
Caterpillar cat 336 f lxe excavator (prefix pfl) service repair manual (pfl00...fjkskedmme
This document provides instructions for disassembling the travel motor on 336F XE and 336F LXE excavator models. The 27-step procedure includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates. Detailed illustrations accompany each step to show how to position tools and disassemble individual parts. Safety notices warn of potential spring forces and ensure fluids are contained.
This document provides instructions for removing and installing piston rings and connecting rod bearings on a Caterpillar 3306 engine. It describes the required tools and steps to disassemble pistons and connecting rods, including removing piston rings, piston pins, and bearings. It then explains how to assemble pistons and connecting rods, including cleaning parts, installing bearings, rings, piston pins, and connecting rods. Finally, it describes installing the pistons and connecting rods back into the engine.
This document provides instructions for removing and installing a fuel injection pump on a 320D2 excavator. Key steps include:
1. Turning off fuel and battery power. Locking the crankshaft and camshaft using tools.
2. Cleaning the pump and area. Disconnecting fuel lines and capping openings. Removing mounting bolts and bracket.
3. Inspecting the housing bore. Installing a new O-ring and bolts. Ensuring proper timing. Reconnecting lines and installing the pump gear.
The instructions emphasize safety precautions for high pressure fuel and provide detailed illustrations to ensure correct removal and installation of the pump.
This document provides instructions for removing and installing a fuel injection pump on a 320D2 excavator. Key steps include:
1. Turning off fuel and battery power. Locking the crankshaft and camshaft using tools.
2. Cleaning the pump and area. Disconnecting fuel lines and capping openings. Removing mounting bolts and bracket.
3. Inspecting the housing bore. Installing a new O-ring and bolts. Ensuring proper timing. Reconnecting lines and installing the pump gear.
The instructions provide safety warnings and emphasize cleanliness when working on the fuel system. Tools are listed and illustrations show the pump and surrounding components.
Caterpillar cat 933 c hystat track loader (prefix 4ms) service repair manual ...fujskekfmsme
The document provides instructions for installing and removing an air inlet manifold and valves on a Caterpillar 3046 engine. It describes:
1) Using various tools to compress valve springs and remove caps and keepers to access the valves and springs.
2) Checking valve springs with a spring tester and specifications.
3) Installing new gaskets and bolting the air inlet manifold, elbow, and other components in multiple steps while checking for damage.
4) Maintaining air pressure in cylinders during valve spring removal and installation to hold valves in position.
Caterpillar cat 930 r wheel loader (prefix 57z) service repair manual (57z040...fujskekfmsme
This document provides instructions for installing the fuel injection pump housing and governor on a Caterpillar 930T wheel loader. It describes:
1) Using an engine turning tool to find the top center position of the No. 1 piston by turning the flywheel and installing a bolt in a hole in the flywheel.
2) Installing fuel pump timing pins and checking that the fuel injection pump gear teeth are aligned with the timing marks on the housing.
3) Installing the fuel injection pump housing and governor, and checking that the governor shaft turns freely once assembled.
Liebherr r317 li tcd hydraulic excavator service repair manual serial no 3001...fusefjjskekemm
This service manual provides technical information for Liebherr hydraulic excavators models A 309 - R 317 Litronic TCD. It contains sections on general information, tools, technical data, maintenance guidelines, the engine, hydraulic system, electrical system, and other major components. The manual is intended for use by customer support services and includes symbols, instructions, and tips for operating and repairing the equipment. It is copyrighted and the property of Liebherr-Hydraulikbagger GmbH.
This document provides instructions for connecting and disconnecting track assemblies on a 320D2 excavator. It describes:
1. Using tools to raise the track into position and install pins and bolts to connect the track shoe.
2. Removing the front idler and recoil spring assembly as one unit by sliding them out of the track roller frame and separating them.
3. Installing the front idler and recoil spring by reversing the removal steps.
The document provides instructions for removing and installing the flywheel and crankshaft rear seal on a Caterpillar 320D2 excavator engine. The flywheel removal procedure involves removing bolts and installing guide studs to lift the flywheel off. The crankshaft rear seal is part of a sealed assembly that must be replaced if removed. Installation of the new seal involves aligning it on the crankshaft using a plastic sleeve and tool before tightening screws.
Daewoo doosan de12 diesel engine service repair manualfjsekkdmme
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the key features of the engines such as their OMEGA combustion bowl design for high efficiency and low emissions. Specifications for each engine model are provided, including power output, torque, idle speeds, and injection timing. Diagrams show the main engine components and assembly configurations in vehicles. Guidelines are given for safe and proper maintenance practices.
Caterpillar cat 312 e excavator (prefix pzl) service repair manual (pzl00001 ...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a 312E or 312E L excavator with a C4.4 engine. The key steps include:
1. Locking the crankshaft and fuel injection pump gear in position using timing pins.
2. Loosening the rocker arm inserts to fully close the valves.
3. Removing the camshaft, idler, and housing gears in the proper order while maintaining timing marks.
4. Cleaning and inspecting components before installing in reverse order while ensuring proper gear mesh and end play measurements.
Caterpillar cat 313 f excavator (prefix nlg) service repair manual (nlg00001 ...fjjskekdmmse
This document provides instructions for installing an idler gear on a C4.4 engine. It outlines 19 steps including cleaning and inspecting parts, installing locking pins to hold components in place, lubricating and installing the idler gear and hub, checking timing marks and backlash, and reinstalling covers once complete. Tools required include various pins, sockets, and indicators to aid in the installation and ensure proper timing. Proper cleaning and lubrication of parts is emphasized to prevent premature wear.
Jcb 536 t70 lp telescopic handler service repair manual sn 2336575 and upfiskefjskemem
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. Specific models covered include 526-56, 531-70, 533-105, 535-95, 536-60, and others. Safety warnings are provided throughout and procedures for removal and installation are described in detail with torque specifications.
Jcb ps760 transmission service repair manualufjjsjefkksemm
This service manual section provides information on servicing and repairing components of the JCB PS760, PS764, PS766 semi-automatic gearbox. The document covers general information, as well as procedures for clutches, solenoid valves, oil pumps, shafts, cases, and other components. Torque specifications and part numbers are included for repairs.
Hyundai hlf1518(c) 5 forklift truck service repair manualfjjskekdmmse
The document outlines the contents and structure of a service manual for a machine. It includes 8 sections that cover general information, removal/installation procedures, power train, brake, steering, hydraulic, electrical, and mast systems. Each section contains groups that break down the systems and components. The document provides an overview of the contents, structure, and intended use of the service manual to aid technicians in performing repairs correctly.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...fjjskekdmmse
The document provides instructions for removing and installing the front gear group on 312E and 312E L excavator models powered by a C4.4 engine. The removal procedure involves using various tools to lock the crankshaft, camshaft and fuel injection pump in position before removing components like the idler gears, camshaft gear, and front housing bearing. The installation procedure outlines cleaning and inspecting components before reinstalling them in reverse order of removal, ensuring proper positioning and locking of gears.
Caterpillar cat 312 b excavator (prefix 3es) service repair manual (3es00001 ...fjsekksmemm
This document provides instructions for removing and installing the engine oil bypass valve on a 312B excavator. It describes removing the engine oil pan, threaded plug, shim, spring, and spring seat from the cylinder block. It then details installing the spring seat, spring, shim, and threaded plug in the cylinder block and tightening to the specified torque. The summary also notes to test the opening pressure of the relief valve and make adjustments if needed.
Caterpillar cat 301.6 mini hydraulic excavator (prefix my6) service repair ma...fjsjekdmmeme
The document provides instructions for disassembling and assembling a blade cylinder for a 301.6 Mini Hydraulic Excavator. The disassembly procedure involves removing seals and other components from both ends of the cylinder. The assembly procedure describes installing the components in reverse order and applying the appropriate torque to fasteners. Separate sections also describe removing and installing the excavator's blade and bucket.
Caterpillar cat 320 d l excavator (prefix dhk) service repair manual (dhk0000...fkjsekksmem
This document provides instructions for removing and installing the boom cylinder on a 320D and 320D L excavator. It outlines the required tools and safety precautions. The removal process involves releasing hydraulic pressure, removing attachment points, and lifting the cylinder out of place. Reinstallation is the reverse of removal. Torque specifications are provided for correct assembly.
Caterpillar cat 312 b excavator (prefix 2kw) service repair manual (2kw00001 ...fjsekksmemm
The document provides instructions for removing and installing the valve mechanism cover on a 3054 engine. The key steps are:
1. Remove all bolts securing the valve mechanism cover to the cylinder head.
2. Remove the valve mechanism cover and gasket.
3. Install a new gasket and valve mechanism cover, securing it with the bolts. Tighten the bolts to the specified torque.
The instructions emphasize keeping parts clean and containing fluids to prevent contamination.
Kubota v3600 t-e3 b diesel engine service repair manualfusjejkdkmse
This document provides service technicians with information on servicing and maintaining various Kubota diesel engine models. It is divided into three parts covering general information, engine mechanisms, and servicing procedures.
The general section includes instructions on identifying engine models, general safety precautions, maintenance checklists, and maintenance schedules. Technicians are advised to check specific components and systems daily, every 50 hours, 250 hours, 500 hours, and longer intervals. The document also lists special tools needed for servicing tasks.
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...jfdskekdmme
The document provides instructions for removing and installing the flywheel, flywheel housing, and crankshaft rear seal of a C6.4 engine. The flywheel is removed using lifting tools and bolts, while the flywheel housing requires removal of mounting bolts and contains a oil seal. Installation follows the reverse process, ensuring clean surfaces and applying retaining compound to mating parts. Special tools are specified for removing and installing the crankshaft rear seal and wear sleeve.
Caterpillar cat 336 f lxe excavator (prefix pfl) service repair manual (pfl00...fjkskedmme
This document provides instructions for disassembling the travel motor on 336F XE and 336F LXE excavator models. The 27-step procedure includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates. Detailed illustrations accompany each step to show how to position tools and disassemble individual parts. Safety notices warn of potential spring forces and ensure fluids are contained.
This document provides instructions for removing and installing piston rings and connecting rod bearings on a Caterpillar 3306 engine. It describes the required tools and steps to disassemble pistons and connecting rods, including removing piston rings, piston pins, and bearings. It then explains how to assemble pistons and connecting rods, including cleaning parts, installing bearings, rings, piston pins, and connecting rods. Finally, it describes installing the pistons and connecting rods back into the engine.
This document provides instructions for removing and installing a fuel injection pump on a 320D2 excavator. Key steps include:
1. Turning off fuel and battery power. Locking the crankshaft and camshaft using tools.
2. Cleaning the pump and area. Disconnecting fuel lines and capping openings. Removing mounting bolts and bracket.
3. Inspecting the housing bore. Installing a new O-ring and bolts. Ensuring proper timing. Reconnecting lines and installing the pump gear.
The instructions emphasize safety precautions for high pressure fuel and provide detailed illustrations to ensure correct removal and installation of the pump.
This document provides instructions for removing and installing a fuel injection pump on a 320D2 excavator. Key steps include:
1. Turning off fuel and battery power. Locking the crankshaft and camshaft using tools.
2. Cleaning the pump and area. Disconnecting fuel lines and capping openings. Removing mounting bolts and bracket.
3. Inspecting the housing bore. Installing a new O-ring and bolts. Ensuring proper timing. Reconnecting lines and installing the pump gear.
The instructions provide safety warnings and emphasize cleanliness when working on the fuel system. Tools are listed and illustrations show the pump and surrounding components.
This document provides instructions for removing a fuel injection pump from a 320D2 excavator. Key steps include:
1. Turning off the fuel supply and battery, locking the crankshaft and camshaft using tools, and removing the backlash from the fuel pump gear.
2. Cleaning the fuel injection pump and surrounding area, capping fuel lines, and disconnecting electrical connections.
3. Removing mounting bolts and carefully removing the fuel injection pump from the front housing.
The document emphasizes safety precautions for working on the high pressure fuel system and provides illustrations of the fuel injection pump and surrounding components. Precise positioning of engine components is required before removing the fuel injection pump
This document provides instructions for removing a fuel injection pump from a 320D2 excavator. Key steps include:
1. Turning off the fuel supply and battery, locking the crankshaft and camshaft using tools, and removing the backlash from the fuel pump gear.
2. Cleaning the fuel injection pump and surrounding area, capping fuel lines, and disconnecting electrical connections.
3. Removing mounting bolts and carefully removing the fuel injection pump from the front housing.
The document emphasizes safety precautions for working on the high pressure fuel system and provides illustrations of the fuel injection pump and surrounding components. Precise positioning of engine components is required before removing the fuel injection pump
This document provides instructions for removing and installing a fuel injection pump on a 320D2 excavator. Key steps include:
1. Turning off fuel and battery power. Locking the crankshaft and camshaft using tools.
2. Cleaning the pump and area. Disconnecting fuel lines and capping connections. Removing mounting bolts and bracket.
3. Inspecting the housing bore. Installing a new O-ring and bolts. Ensuring timing is correct before installing the fuel pump gear. Reconnecting lines and testing.
This document provides instructions for removing a fuel injection pump from a 320D2 excavator. Key steps include:
1. Turning off the fuel supply and battery, locking the crankshaft and camshaft using tools, and removing the backlash from the fuel pump gear.
2. Cleaning the fuel injection pump and surrounding area, capping fuel lines, and disconnecting electrical connections.
3. Removing mounting bolts and carefully removing the fuel injection pump from the front housing.
The document emphasizes safety precautions for working on the high pressure fuel system and provides illustrations of the fuel injection pump and surrounding components. Precise positioning of engine components is required before removing the fuel injection pump
This document provides instructions for removing and installing a fuel injection pump on a 320D2 excavator. Key steps include:
1. Turning off fuel and battery power. Locking the crankshaft and camshaft using tools.
2. Cleaning the pump and area. Disconnecting fuel lines and capping openings. Removing mounting bolts and bracket.
3. Inspecting the housing bore. Installing a new O-ring and bolts. Ensuring proper timing. Reconnecting lines and installing the pump gear.
The instructions provide safety warnings and emphasize cleanliness when working on the fuel system. Tools are listed and illustrations show the pump and surrounding components.
Similar to Caterpillar cat 320 d2 excavator (prefix kbs) service repair manual (kbs00001 and up) (7)
Jcb tlt 25 g teletruk (variable reach truck)service repair manual sn 2317866 ...fikskekdmdm
This service manual provides information for servicing a Teletruk (variable reach truck) models TLT 25G and TLT 30G. The manual contains sections covering the entire machine including the engine, which is the focus of this specific excerpt. The excerpt provides details on the 4-cylinder engine including its basic description and operation via the four-stroke cycle. It also includes important safety information and technical specifications.
Jcb 418 s wheeled loading shovel service repair manual (from 2335673 to 2336423)fikskekdmdm
This document provides a summary of a service manual for a JCB 418S Wheeled Loading Shovel. It includes 3 sections: General Information, Operator's Manual, and various component sections. Copyright protection is provided and permission is required for reproduction. Standard torque settings, service tools, and service consumables are included for repair and maintenance. The document identifies the machine using serial numbers on an identification plate and provides definitions for left/right orientation and color codes.
Liebherr r954 c 784 hydraulic excavator service repair manualfikskekdmdm
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 783 hydraulic excavator service repair manualfikskekdmdm
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 781 hydraulic excavator service repair manualfikskekdmdm
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 780 hydraulic excavator service repair manualfikskekdmdm
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1339 hydraulic excavator service repair manualfikskekdmdm
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r934 c 918 hydraulic excavator service repair manualfikskekdmdm
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support but does not replace proper training. Symbols are used to indicate dangers, warnings, and important notes. The document structure organizes information into main groups and numbered subgroups for easy reference.
Liebherr r934 c 033 hydraulic excavator service repair manualfikskekdmdm
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r934 c 027 hydraulic excavator service repair manualfikskekdmdm
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r317 li tcd hydraulic excavator service repair manual serial no 3001...fikskekdmdm
This service manual provides technical information for Liebherr hydraulic excavators models A 309 - R 317 Litronic TCD. It contains sections on general information, tools, technical data, maintenance guidelines, the engine, hydraulic system, electrical system, and other major components. The document is intended for use by customer support services to assist with operation and maintenance of the excavators. It identifies safety symbols and notes and is the property of Liebherr-Hydraulikbagger GmbH.
Jcb 320 t skid steer loader service repair manual sn from 2675500 to 2675700fikskekdmdm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 320 t skid steer loader service repair manual sn from 2478301 to 2478700fikskekdmdm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 67 c 1 mini excavator service repair manual (sn from 1912903 to 1913903)fikskekdmdm
This service manual provides instructions for servicing an excavator engine. It contains sections on general information, components, operation, checks, removal/installation and disassembly/assembly of the rocker and fittings assembly. The summary focuses on the rocker and fittings which include the rocker arms, rocker shaft, rocker cover, push rods and tappets. Lubrication of these components is described. Procedures for checking components, removing and installing the rocker assembly, and disassembling and assembling the rocker shaft and arms are provided in detail over multiple pages.
Jcb 57 c 1 mini excavator service repair manual (perkins engine)fikskekdmdm
This service manual provides instructions for servicing JCB machines models 55Z-1 and 57C-1. It contains sections on the machine components, attachments, body, operator station, HVAC, engine, fuel and exhaust systems, cooling system, driveline, hydraulics, electrical system, fasteners and consumable products. Section 15 focuses on the engine and includes a subsection on valves that provides technical specifications, identifies valve components, describes valve operation, and provides instructions for checking valve condition, adjusting valve lash, and removing and installing valves.
Jcb 55 z 1 mini excavator service repair manual (perkins engine)fikskekdmdm
This service manual section provides information on servicing the engine valves of a JCB machine. It includes technical specifications for valve components, descriptions of valve operation and the valve train system. Procedures are provided for checking valve condition by inspecting lash, depth, and wear. The section also describes how to adjust the valve lash clearance using feeler gauges and the adjustment screws, with the engine in the correct timing position.
Jcb 3 cx t2 t3 backhoe loader service repair manual from 2674101 to 2675100fikskekdmdm
This service manual provides instructions for servicing the valves on a backhoe loader engine. It describes the valve components and their operation. The procedure explains how to set the engine in two positions to access all the valves. It provides details on measuring valve clearance, adjusting clearance if needed, and removing and installing the valves. Special tools are required, including a crankshaft turning tool, valve clearance service kit, and valve stem seal installation tool.
Jcb 3 cx t2 t3 backhoe loader service repair manual from 2615002 to 2616002fikskekdmdm
This service manual provides instructions for servicing the valves on a JCB 3CX backhoe loader engine. It describes the valve components and their operation. The procedure explains how to set the engine in two positions to access all the valves. It provides details on measuring valve clearance, adjusting clearance if needed, and removing and installing valves. Special tools are required, including a crankshaft turning tool, valve clearance service kit, and valve stem seal installation tool.
Jcb 1 cx compact backhoe loader service repair manual sn from 1050000 to 1051999fikskekdmdm
This service manual provides information for servicing a JCB backhoe loader models 1CX and 1CXT. It contains sections covering the machine systems, components, safety procedures, and maintenance instructions. Safety is emphasized, including warnings to read the manual before operating the machine and ensure proper training. The manual instructs technicians on servicing the engine, hydraulics, brakes, drivetrain and other systems of the backhoe loader.
Jcb 1 cx compact backhoe loader service repair manual sn 1743000 and upfikskekdmdm
This service manual provides information for servicing a JCB backhoe loader models 1CX and 1CXT. It contains sections covering the machine systems, components, safety procedures, and maintenance instructions. Safety is emphasized, including warnings to read the manual before operating the machine and ensure proper training. The manual instructs technicians on servicing all aspects of the backhoe loader.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Contact with high pressure fuel may cause fluid penetration and burn
hazards. High pressure fuel spray may cause a fire hazard. Failure to
follow these inspection, maintenance and service instructions may cause
personal injury or death.
NOTICE
Ensure that all adjustments and repairs that are carried out to the fuel
system are performed by authorized personnel that have the correct
training.
Before beginning ANY work on the fuel system, refer to Operation and
Maintenance Manual, "General Hazard Information and High
Pressure Fuel Lines" for safety information.
Refer to System Operation, Testing and Adjusting, "Cleanliness of
Fuel System Components" for detailed information on the standards of
cleanliness that must be observed during ALL work on the fuel system.
1. Turn the fuel supply to the OFF position.
2. Turn the battery disconnect switch to the OFF position.
2/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. Illustration 1 g02695477
3. Use Tooling (A) in order to rotate the crankshaft so that number one piston is at top dead
center position . Refer to System Operation, Testing and Adjusting, "Finding Top Center
Position for No.1 Piston" for the correct procedure.
4. Use Tooling (B) in order to lock the crankshaft so that number one piston is at top dead
center position.
5. Use Tooling (C) in order to lock the camshaft.
6. Loosen locking screw (1) . Rotate spacer (2) in order to allow locking screw (1) to tighten
against the shaft of the fuel injection pump. Rotate the fuel injection pump gear in a
counterclockwise direction in order to remove the backlash. Tighten locking screw (1) to a
torque of 15 N·m (133 lb in).
Note: Locking the screw must be tightened in order to prevent the shaft of the fuel injection
pump from rotating. The shaft of the fuel injection pump must not be rotated after the fuel
injection pump has been removed from the engine.
7. Remove the backlash from the fuel pump gear. Lock the fuel injection pump in the correct
position and remove the fuel pump gear. Refer to Disassembly and Assembly, "Fuel Pump
Gear - Remove and Install" for the correct procedure.
3/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. Illustration 2 g02695396
8. Clean fuel injection pump (7) and the area around the fuel injection pump. Ensure that the
area is free from contamination before beginning disassembly.
9. Place a suitable container below fuel injection pump (7) in order to catch any fuel that might
be spilled.
10. Disconnect plastic tube assembly (3) , and plastic tube assembly (5) from fuel injection
pump (7) .
11. Remove plastic tube assembly (3) , and plastic tube assembly (5) from clips (4) and clip
(6) . Position the plastic tube assemblies away from the fuel injection pump.
12. Use Tooling (D) in order to plug plastic tube assembly (3) , and plastic tube assembly (5) .
13. Use Tooling (D) in order to cap connection for the plastic tube assemblies on fuel injection
pump (7) .
14. Disconnect the Original Equipment Manufactures (OEM) harness assembly from governor
(8) .
15. Disconnect the OEM harness assemblies from solenoid (9) and solenoid (10) .
16. If necessary, disconnect the OEM harness assemblies from solenoid (10) .
17. Remove the nut and bolt (11) from fuel injection pump (7) .
4/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. 18. Remove bolt (13) and remove bracket (12) from the cylinder block and the fuel injection
pump.
Illustration 3 g02695516
19. Remove bolts (14) and sealing washers (15) from fuel injection pump (7) .
Note: The fuel injection pump should be supported by hand as the bolts are removed.
20. Carefully remove fuel injection pump (7) from front housing (16) .
21. Remove O-ring seal (17) from fuel injection pump (7) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 23 18:38:53 UTC+0800 2020
5/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D2 EXCAVATOR KBS
Configuration: 320D2 & 320D2 L Excavators KBS00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 (Mech) Engines for Caterpillar Built Machines
Media Number -UENR0674-08 Publication Date -01/06/2015 Date Updated -23/01/2017
i06257875
Fuel Injection Pump - Remove - With Boost Control
SMCS - 1251-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A (1)
9U-7336 Crankshaft Turning Tool 1
A (2)
5P-7305 Housing 1
5P-7305 Engine Turning Tool 1
B
136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
C 230-6284 Timing Pin (Camshaft) 1
D 422-7170 Capping Kit 1
( 1 )
The Crankshaft Turning Tool is used on the front pulley.
( 2 )
This Tool is used in the aperture for the electric starting motor.
Start By:
A. Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and
Install" for the correct procedure .
B. Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines
- Remove" for the correct procedure.
Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
1/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. Contact with high pressure fuel may cause fluid penetration and burn
hazards. High pressure fuel spray may cause a fire hazard. Failure to
follow these inspection, maintenance and service instructions may cause
personal injury or death.
NOTICE
Ensure that all adjustments and repairs that are carried out to the fuel
system are performed by authorized personnel that have the correct
training.
Before beginning ANY work on the fuel system, refer to Operation and
Maintenance Manual, "General Hazard Information and High
Pressure Fuel Lines" for safety information.
Refer to System Operation, Testing and Adjusting, "Cleanliness of
Fuel System Components" for detailed information on the standards of
cleanliness that must be observed during ALL work on the fuel system.
1. Turn the fuel supply to the OFF position.
2. Turn the battery disconnect switch to the OFF position.
2/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. Illustration 1 g02791601
3. Use Tooling (A) in order to rotate the crankshaft so that number one piston is at top dead
center position . Refer to System Operation, Testing and Adjusting, "Finding Top Center
Position for No.1 Piston" for the correct procedure.
4. Use Tooling (B) in order to lock the crankshaft so that number one piston is at top dead
center position.
5. Use Tooling (C) in order to lock the camshaft.
6. Loosen locking screw (1) . Rotate spacer (2) in order to allow locking screw (1) to tighten
against the shaft of the fuel injection pump. Rotate the fuel injection pump gear in a
counterclockwise direction in order to remove the backlash. Tighten locking screw (1) to a
torque of 15 N·m (133 lb in).
Note: Locking the screw must be tightened in order to prevent the shaft of the fuel injection
pump from rotating. The shaft of the fuel injection pump must not be rotated after the fuel
injection pump has been removed from the engine.
7. Remove the backlash from the fuel pump gear. Lock the fuel injection pump in the correct
position and remove the fuel pump gear. Refer to Disassembly and Assembly, "Fuel Pump
Gear - Remove and Install" for the correct procedure.
3/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. Illustration 2 g02791603
8. Clean fuel injection pump (8) and the area around the fuel injection pump. Ensure that the
area is free from contamination before beginning disassembly.
9. Place a suitable container below fuel injection pump (8) in order to catch any fuel that might
be spilled.
10. Disconnect plastic tube assembly (3) , plastic tube assembly (4) , and plastic tube assembly
(6) from fuel injection pump (8) .
11. Remove plastic tube assembly (3) , plastic tube assembly (4) , and plastic tube assembly (6)
from clips (5) and clip (7) . Position the plastic tube assemblies away from the fuel injection
pump.
12. Use Tooling (D) in order to plug plastic tube assembly (3) , plastic tube assembly (4) , and
plastic tube assembly (6) .
13. Use Tooling (D) in order to cap connections for the plastic tube assemblies on fuel injection
pump (8) .
14. Remove tube assembly (9) from fuel injection pump (8) and the cylinder head.
15. Remove seal (10) (not shown).
16. Disconnect the OEM harness assemblies from solenoid (11) and solenoid (12) .
17. Remove the nut and bolt (13) from fuel injection pump (8) .
4/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. 18. Remove bolt (15) and remove bracket (14) from the cylinder block and the fuel injection
pump.
Illustration 3 g02791604
19. Remove bolts (17) and sealing washers (16) from fuel injection pump (8) .
Note: The fuel injection pump should be supported by hand as the bolts are removed.
20. Carefully remove fuel injection pump (8) from front housing (18) .
21. Remove O-ring seal (19) from fuel injection pump (8) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 23 18:39:49 UTC+0800 2020
5/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D2 EXCAVATOR KBS
Configuration: 320D2 & 320D2 L Excavators KBS00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 (Mech) Engines for Caterpillar Built Machines
Media Number -UENR0674-08 Publication Date -01/06/2015 Date Updated -23/01/2017
i04780451
Fuel Injection Pump - Install - With Boost Control
SMCS - 1251-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A(1)
9U-6198 Crankshaft Turning Tool 1
A(2)
5P-7306 Housing 1
5P-7305 Engine Turning Tool 1
B
136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
C 230-6284 Timing Pin (Camshaft) 1
(1)
The Crankshaft Turning Tool is used on the front pulley.
(2)
This Tool is used in the aperture for the electric starting motor.
Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
NOTICE
Ensure that all adjustments and repairs that are carried out to the fuel
system are performed by authorized personnel that have the correct
training.
1/6(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. Before beginning ANY work on the fuel system, refer to Operation and
Maintenance Manual, "General Hazard Information and High
Pressure Fuel Lines" for safety information.
Refer to System Operation, Testing and Adjusting, "Cleanliness of
Fuel System Components" for detailed information on the standards of
cleanliness that must be observed during ALL work on the fuel system.
1. Inspect the bore in the front housing for damage. If the bore is damaged, replace the front
housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove" for the correct
procedure.
Illustration 1 g02791604
2. Install a new O-ring seal (19) to fuel injection pump (8).
3. Install new sealing washers (16) to bolts (17).
4. Carefully install fuel injection pump (8) to front housing (18).
Note: The fuel injection pump should be supported by hand as the bolts are installed.
5. Install bolts (17) to fuel injection pump (8) hand tight.
6. Tighten bolts (17) to a torque of 22 N·m (195 lb in).
2/6(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. Illustration 3 g02792516
7. Position bracket (14) onto the cylinder block and the fuel injection pump. Install bolt (15) to
the cylinder block finger tight.
8. Install the nut and bolt (13) to fuel injection pump (8) finger tight.
9. Tighten bolts (15) to a torque of 44 N·m (32 lb ft). Tighten the nut and bolt (13) to a torque
of 22 N·m (195 lb in).
Note: Ensure that the fuel injection pump is not stressed as the bolts for the bracket are
tightened.
10. Ensure that the No. 1 cylinder is at top dead center on the compression stroke. Refer to
Systems Operation, Testing and Adjusting, "Fuel Injection Timing - Check". If necessary,
use Tooling (A) in order to rotate the crankshaft so that number one piston is at the top
center position on the compression stroke. Refer to Systems Operation, Testing and
Adjusting, "Finding Top Center Position for No.1 Piston" for the correct procedure.
11. Use Tooling (C) in order to lock the camshaft in the correct position. Use Tooling (B) in
order to lock the crankshaft in the correct position.
12. Install the fuel injection pump gear to fuel injection pump (8). Refer to Disassembly and
Assembly, "Fuel Injection Pump Gear - Install".
13. Remove Tooling (C) and Tooling (B).
4/6(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. 14. Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines -
Install" for the correct procedure.
15. Install a new seal (10) (not shown) to tube assembly (9).
16. Connect tube assembly (9) to fuel injection pump (8) and the cylinder head.
17. Tighten tube nut (20) to a torque of 8 N·m (71 lb in).
18. Tighten tube nut (21) to a torque of 6 N·m (53 lb in).
19. Remove the plugs from fuel injection pump (8).
20. Remove the caps from plastic tube assembly (3), plastic tube assembly (4), and plastic tube
assembly (6).
21. Connect plastic tube assembly (3), plastic tube assembly (4), and plastic tube assembly (4)
to fuel injection pump (8).
22. Install plastic tube assembly (3), plastic tube assembly (5), and plastic tube assembly (6) to
clips (5) and clip (7).
23. Connect the OEM harness assemblies to solenoid (11) and solenoid (12).
Illustration 4 g02791601
5/6(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. 24. Loosen locking screw (1). Rotate spacer (2) in order to allow locking screw (1) to tighten
against spacer (2). Tighten locking screw (1) to a torque of 12 N·m (106 lb in).
Note: Ensure that the fuel injection pump is in the unlocked position.
25. Turn the fuel supply to the OFF position.
26. Turn the battery disconnect switch to the ON position.
27. Remove the air from the fuel system. Refer to Operation and Maintenance Manual, "Fuel
System - Prime" for the correct procedure.
End By:
a. Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and
Install" for the correct procedure .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 23 18:40:44 UTC+0800 2020
6/6(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D2 EXCAVATOR KBS
Configuration: 320D2 & 320D2 L Excavators KBS00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 (Mech) Engines for Caterpillar Built Machines
Media Number -UENR0674-08 Publication Date -01/06/2015 Date Updated -23/01/2017
i04780453
Fuel Injection Pump - Install - With Electronic Governor
SMCS - 1251-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A(1)
9U-6198 Crankshaft Turning Tool 1
A(2)
5P-7306 Housing 1
5P-7305 Engine Turning Tool 1
B
136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
C 230-6284 Timing Pin (Camshaft) 1
(1)
The Crankshaft Turning Tool is used on the front pulley.
(2)
This Tool is used in the aperture for the electric starting motor.
Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
NOTICE
Ensure that all adjustments and repairs that are carried out to the fuel
system are performed by authorized personnel that have the correct
training.
1/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. Before beginning ANY work on the fuel system, refer to Operation and
Maintenance Manual, "General Hazard Information and High
Pressure Fuel Lines" for safety information.
Refer to System Operation, Testing and Adjusting, "Cleanliness of
Fuel System Components" for detailed information on the standards of
cleanliness that must be observed during ALL work on the fuel system.
1. Inspect the bore in the front housing for damage. If the bore is damaged, replace the front
housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove" for the correct
procedure.
Illustration 1 g02695516
2. Install a new O-ring seal (17) to fuel injection pump (7).
3. Install new sealing washers (15) to bolts (14).
4. Carefully install fuel injection pump (7) to front housing (16).
Note: The fuel injection pump should be supported by hand as the bolts are installed.
5. Install bolts (14) to fuel injection pump (7) hand tight.
6. Tighten bolts (14) to a torque of 22 N·m (195 lb in).
2/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. Illustration 2 g02695396
7. Position bracket (12) onto the cylinder block and the fuel injection pump. Install bolt (13) to
the cylinder block finger tight.
8. Install the nut and bolt (11) to fuel injection pump (7) finger tight.
9. Tighten bolts (13) to a torque of 44 N·m (32 lb ft). Tighten the nut and bolt (11) to a torque
of 22 N·m (195 lb in).
Note: Ensure that the fuel injection pump is not stressed as the bolts for the bracket are
tightened.
10. Ensure that the No. 1 cylinder is at top dead center on the compression stroke. Refer to
Systems Operation, Testing and Adjusting, "Fuel Injection Timing - Check". If necessary,
use Tooling (A) in order to rotate the crankshaft so that number one piston is at the top
center position on the compression stroke. Refer to Systems Operation, Testing and
Adjusting, "Finding Top Center Position for No.1 Piston" for the correct procedure.
11. Use Tooling (C) in order to lock the camshaft in the correct position. Use Tooling (B) in
order to lock the crankshaft in the correct position.
12. Install the fuel injection pump gear to fuel injection pump (7). Refer to Disassembly and
Assembly, "Fuel Injection Pump Gear - Install".
13. Remove Tooling (C) and Tooling (B).
3/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. 14. Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines -
Install" for the correct procedure.
15. Remove the plugs from fuel injection pump (7).
16. Remove the caps from plastic tube assembly (3), and plastic tube assembly (5).
17. Connect plastic tube assembly (3), and plastic tube assembly (5) to fuel injection pump (7).
18. Install plastic tube assembly (3), and plastic tube assembly (5) to clips (4) and clip (6).
19. Connect the OEM harness assembly to governor (8).
20. Connect the OEM harness assemblies to solenoid (9) and solenoid (10).
21. If necessary, connect the OEM harness assemblies to solenoid (10).
Illustration 3 g02695477
22. Loosen locking screw (1). Rotate spacer (2) in order to allow locking screw (1) to tighten
against spacer (2). Tighten locking screw (1) to a torque of 12 N·m (106 lb in).
Note: Ensure that the fuel injection pump is in the unlocked position.
23. Turn the fuel supply to the OFF position.
24. Turn the battery disconnect switch to the ON position.
4/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. 25. Remove the air from the fuel system. Refer to Operation and Maintenance Manual, "Fuel
System - Prime" for the correct procedure.
End By:
a. Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and
Install" for the correct procedure .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 23 18:41:40 UTC+0800 2020
5/5(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D2 EXCAVATOR KBS
Configuration: 320D2 & 320D2 L Excavators KBS00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 (Mech) Engines for Caterpillar Built Machines
Media Number -UENR0674-08 Publication Date -01/06/2015 Date Updated -23/01/2017
i04780457
Fuel Injection Pump Gear - Remove
SMCS - 1251-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A(1)
9U-7336 Crankshaft Turning Tool 1
A(2)
5P-7305 Housing 1
5P-7305 Engine Turning Tool 1
B 230-6284 Timing Pin (Camshaft) 1
C
136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
D - Puller (Three Leg) 1
(1)
The Crankshaft Turning Tool is used on the front pulley.
(2)
This Tool is used in the aperture for the electric starting motor.
Start By:
a. Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and
Install".
Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
NOTICE
1/6(W)
w
2020/2/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...