The document provides instructions to disassemble the swing drive of an excavator model 315D L. It lists 21 steps to fully disassemble the swing drive including removing retaining rings, shafts, gears, bearings, washers and the housing. Several tools are required including retaining ring pliers, link brackets, a puller, crossblock, sleeve, and bearing puller. Cleanliness is important to prevent contamination of parts during disassembly.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 315D L EXCAVATOR BZN
Configuration: 315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
315D, 318D and 319D Excavators Machine Systems
Media Number -KENR5272-13 Publication Date -01/09/2017 Date Updated -06/09/2017
i05748974
Swing Drive - Disassemble
SMCS - 5459-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1863 Retaining Ring Pliers 1
B 138-7575 Link Brackets 2
C
4C-5660 Adapter 2
5F-7369 Puller Leg 2
3H-0465 Push-Puller Plate 2
1P-0820 Hydraulic Puller 1
3H-0468 Puller Plate 2
3S-6224 Electric Hydraulic Pump Gp 1
1U-9889 Crossblock 1
D 138-7573 Link Brackets 2
E FT-3023 Sleeve 1
F 5F-7343 Bearing Puller Gp 1
3H-0465 Push-Puller Plate 4
5F-7369 Puller Leg 2
5F-7342 Adapter 2
1/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 1P-0820 Hydraulic Puller 1
3S-6224 Electric Hydraulic Pump Gp 1
Start By:
A. Remove the swing motor and swing drive. Refer to Disassembly and Assembly, "Swing
Motor and Swing Drive - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will prevent dirt from entering the internal
mechanism.
NOTICE
Keep all parts clean from contaminants.
Contamination of the hydraulic system with foreign material will
reduce the service life of the hydraulic system components.
To prevent contaminants from entering the hydraulic system, always
plug or cap the lines, fittings, or hoses as they are disconnected. Cover
any disassembled components and clean them properly before
assembly.
Clean the hydraulic system properly after any major component
exchange or especially after a component failure, to remove any
contamination.
Illustration 1 g00702449
1. Remove sun gear (1) from carrier assembly (2) .
2/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g00702450
2. Remove spacer (3) .
Illustration 3 g00702451
3. Remove carrier assembly (2) from ring gear (4) .
Illustration 4 g00702452
3/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 4. Drive roll pin (5) into shaft (6) . Remove shaft (6) and the gear assembly.
Illustration 5 g00702456
5. Disassemble the gear assembly, as follows: washer (7) , gear (8) , bearing (9) , and washer
(10) . Remove roll pin (5) from shaft (6) .
6. Repeat Step 4 through Step 5 for the remaining gear assemblies.
Illustration 6 g00702457
7. Remove retaining ring (11) . Remove carrier (13) from the sun gear.
4/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 7 g00702459
8. Use Tooling (A) in order to remove retaining ring (14) .
Illustration 8 g00702583
9. Use two people in order to remove ring gear (15) from housing (16) . The weight of ring
gear (15) is approximately 29 kg (65 lb).
Illustration 9 g00702584
5/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 10. Remove spacer (17) from carrier assembly (18) .
Illustration 10 g00702596
11. Use Tooling (A) to remove retaining ring (19) .
Illustration 11 g01338951
12. Remove carrier assembly (18) from the housing. The weight of carrier assembly (18) is
approximately 25 kg (55 lb).
6/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 12 g00702640
13. Drive roll pin (20) into shaft (21) . Remove shaft (21) .
Illustration 13 g00702648
14. Disassemble the gear assembly, as follows: washer (22) , bearing (23) , gear (24) , bearing
(25) , and washer (26) . Remove roll pin (20) from shaft (21) .
15. Repeat Step 13 through Step 14 for the remaining gear assemblies.
7/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 14 g01339732
16. Remove bolts (27) from the housing.
Illustration 15 g01339903
Illustration 16 g01339833
17. Attach Tooling (B) and a suitable lifting device in order to remove housing (28) . The
weight of housing (28) is approximately 68 kg (150 lb). If shaft assembly (29) is stuck in
housing (28) install Tooling (C) in order to remove shaft assembly (29) .
8/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 17 g01338949
Illustration 18 g01339781
Illustration 19 g01339877
18. Use Tooling (A) in order to install retaining ring (19) . Attach a suitable lifting device to
shaft assembly (29) . The weight of shaft assembly (29) is approximately 45 kg (100 lb).
Position shaft assembly (29) onto Tooling (E) . Install Tooling (D) .
9/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 19. Position Tooling (E) and shaft assembly (29) as a unit into a suitable press. The weight of
Tooling (E) and the shaft assembly (29) is approximately 93 kg (205 lb). Use Tooling (A) in
order to remove retaining ring (19) . Remove bearings (30) and spacer (31) .
Note: If excessive force is required to remove bearings, use Tooling (F) in order to remove
the top bearing first.
Illustration 20 g01338948
20. Attach a suitable lifting device to Tooling (D) in order to remove cage (33) and Tooling
(E) . Remove cage (33) and Tooling (E) from shaft (32) .
Illustration 21 g01340053
21. Remove O-ring seal (34) . Remove lip seals (35) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Oct 16 10:03:08 UTC+0800 2020
10/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 315D L EXCAVATOR BZN
Configuration: 315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
315D, 318D and 319D Excavators Machine Systems
Media Number -KENR5272-13 Publication Date -01/09/2017 Date Updated -06/09/2017
i07163707
Swing Drive - Disassemble - Grease Filled
SMCS - 5459-015
S/N - AYF1-UP
S/N - BZH1-UP
S/N - BZN1-UP
S/N - CJN1-UP
S/N - DAY1-UP
S/N - EAW1-UP
S/N - FMH1-UP
S/N - JGS1-UP
S/N - JHA1-UP
S/N - KBD1-UP
S/N - KFM1-UP
S/N - KRM1-UP
S/N - NCM1-UP
S/N - RJP1-UP
S/N - TLE1-UP
S/N - ZCA1-UP
1/7
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. S/N - ZGZ1-UP
S/N - ZKJ1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5F-7343 Bearing Puller Gp 1
Start By:
a. Remove the swing motor. Refer to the Disassembly and Assembly, "Swing Motor -
Remove".
b. Remove the swing drive. Refer to the Disassembly and Assembly, "Swing Drive -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03576636
1. Use a suitable lifting device to place the swing drive on table. The weight of the swing drive
is approximately 84 kg (185 lb).
2. Remove sun gear (1) from carrier assembly (2).
3. Remove carrier assembly (2) from ring gear (3).
2/7
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 2 g03576957
4. Remove retaining ring (4). Remove thrust washer (5) and planetary gear (6).
Illustration 3 g03576977
Illustration 4 g03576996
5. Remove bearing assembly (6) and thrust washer (7).
6. Drive spring pin (9) into shaft (8). Remove shaft (8) from carrier assembly (2).
7. Repeat Steps 4 through 6 for the remaining planetary gears.
3/7
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 5 g03577121
Illustration 6 g03577158
8. Remove sun gear (10) from the planetary carrier assembly.
9. Remove ring gear (11) from housing (12).
Illustration 7 g03577196
10. Remove planetary carrier assembly (13) from the pinion shaft.
4/7
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g03577357
11. Drive spring pin (15) into shaft (14) to remove shaft (14) and the planetary gear assembly.
Illustration 9 g03577616
12. Remove shaft (14), thrust washer (16), bearings (17), planetary gear (18), and thrust washer
(19). Repeat Steps 11 through 12 for the remaining planetary gear assemblies.
Illustration 10 g03577639
13. Turn the housing and the pinion shaft assembly over and remove plates (20).
5/7
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 11 g03578221
14. Remove retaining ring (21) to remove pinion shaft (22).
Illustration 12 g03578226
15. Use a suitable press to remove pinion shaft (22) from the bearings and housing assembly
(12).
Note: Take some precaution to prevent the pinion shaft from dropping out of the bottom.
Illustration 13 g03578276
6/7
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 14 g03578319
16. Remove bearing (23) and seal (24) from the housing.
Illustration 15 g03578476
17. Use Tooling (A) and a suitable press to remove bearing assembly (25) from pinion shaft
(22). Support Tooling (A) with suitable blocks. Place support under pinion shaft (22) to
keep from dropping to the floor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Oct 16 10:04:03 UTC+0800 2020
7/7
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 315D L EXCAVATOR BZN
Configuration: 315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
315D, 318D and 319D Excavators Machine Systems
Media Number -KENR5272-13 Publication Date -01/09/2017 Date Updated -06/09/2017
i04262676
Swing Drive - Assemble
SMCS - 5459-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-1863 Retaining Ring Pliers 1
B 138-7575 Link Brackets 2
D 138-7573 Link Brackets 2
E FT-3023 Sleeve 1
G 1P-0520 Driver Gp 1
H 5P-3931 Anti-Seize Compound 1
J 8M-4856 (1)
Sleeve 1
K -
Guide Stud
M16 - 2.00 by 140mm
2
L 1U-8846 Gasket Sealant 1
(1)
This part is being discontinued. Replace with 367-6742 Sleeve .
Note: Cleanliness is an important factor. Before assembly, clean all parts in cleaning fluid. Allow
the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited
on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use
new parts for replacement.
1/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 1 g01339794
Illustration 2 g01339807
1. Use a suitable press and Tooling (G) in order to install lip seal (35) into cage (33).
2. Use two people to place shaft (32) in a suitable press. The weight of shaft (32) is
approximately 30 kg (65 lb). Install cage (33). Install O-ring seal (34).
Illustration 3 g01339812
2/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 4 g01339149
3. Apply Tooling (H) to inner diameter of the bearing and the shaft. Use a suitable press and
Tooling (J) in order to install bearing (30). Install spacer (31). The bevel of the spacer must
face upward.
4. Install bearing (30).
Illustration 5 g01339824
Illustration 6 g01339903
3/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 5. Attach a suitable lifting device to shaft assembly (29). Use Tooling (A) in order to install
retaining ring (19). Install shaft assembly (29) onto Tooling (E). Remove the suitable lifting
device.
6. Attach Tooling (B) and a suitable lifting device to housing (28). Install housing (28) on the
shaft assembly. Position the shaft assembly to the side by 90 degrees. Remove tooling (E).
Illustration 7 g01339732
7. Install bolts (27).
Illustration 8 g00703698
8. Assemble the gear assembly, as follows: washer (22), bearing (23), gear (24), bearing (25),
and washer (26).
4/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 9 g00702640
Illustration 10 g00703700
9. Use a deburring tool in order to remove the metal burr from the openings in the carrier.
Install shaft (21) and the gear assembly into the carrier assembly. Drive roll pin (20) into
shaft (21). Orient the split in roll pin (20) vertically to the carrier. Align the split in the roll
pin to the top or to the bottom. Make a stake mark on each side of the roll pin hole in the
carrier. Each stake mark should be approximately 2.25 ± 0.75 mm (0.090 ± 0.030 inch)
from the outside diameter of the roll pin hole.
10. Repeat Step 8 through Step 9 for the remaining gear assemblies.
Illustration 11 g01338951
11. Install carrier assembly (18) into the housing. The weight of carrier assembly (18) is
approximately 25 kg (55 lb).
5/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 12 g00702596
12. Use Tooling (A) to install retaining ring (19).
Illustration 13 g00702584
13. Install spacer (17) into carrier assembly (18).
Illustration 14 g01340279
6/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 15 g00702583
14. Apply Tooling (L) to the face of housing (16). Install Tooling (K) in order to help align the
housing and the ring gear. Use two people in order to install ring gear (15) onto housing
(16). The weight of ring gear (15) is approximately 29 kg (65 lb).
Illustration 16 g00702459
15. Install retaining ring (14) into the sun gear.
Illustration 17 g00702457
16. Install carrier (13) into the sun gear. Install retaining ring (11) into sun gear (12).
7/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 18 g00703707
17. Assemble the gear assembly, as follows: washer (7), gear (8), bearing (9), and washer (10)
Illustration 19 g00702452
Illustration 20 g00703700
8/10
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP5...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...