The document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator including the crankshaft front seal, idler gear, housing (front), valve mechanism cover, bridge dowels, rocker shaft and push rod. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and installation notes are also provided.
Caterpillar cat 308 e2cr mini hydraulic excavator (prefix tmx) service repair...fjjsekfksmem
This document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator powered by a C3.3B engine. The procedures include removing and installing the crankshaft front seal, idler gear, front housing, valve mechanism cover, bridge dowels, rocker shaft, and push rod. Tools required and torque specifications are provided where needed to complete the procedures correctly.
Caterpillar cat 308 e2cr mini hydraulic excavator (prefix tmx) service repair...fujsjekskem
This document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator powered by a C3.3B engine. The procedures include removing and installing the crankshaft front seal, idler gear, front housing, valve mechanism cover, bridge dowels, rocker shaft, and push rod. Tools required and torque specifications are provided where needed to complete the procedures correctly.
Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix TMX) Service Repair ...hvy7sbkw8e
The document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator including the crankshaft front seal, idler gear, housing (front), valve mechanism cover, bridge dowels, and rocker shaft and push rod. The instructions include lists of required tools and step-by-step procedures with illustrations for each component. Safety notices are also provided to take precautions when handling fluids and preventing contamination.
Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix TMX) Service Repair ...xiapokang564341
The document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator including the crankshaft front seal, idler gear, housing (front), valve mechanism cover, bridge dowels, and rocker shaft and push rod. The instructions include lists of required tools and step-by-step procedures with illustrations for each component. Safety notices are also provided to take precautions when handling fluids and preventing contamination.
Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix TMX) Service Repair ...wenxian17880
The document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator including the crankshaft front seal, idler gear, housing (front), valve mechanism cover, bridge dowels, and rocker shaft and push rod. The instructions include lists of required tools and step-by-step procedures with illustrations for each component. Safety notices are also provided to take precautions when handling fluids and preventing contamination.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...fikskkdmmd1
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...jdjkskmikdkmd
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...paws21610697
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar cat 308 e2cr mini hydraulic excavator (prefix tmx) service repair...fjjsekfksmem
This document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator powered by a C3.3B engine. The procedures include removing and installing the crankshaft front seal, idler gear, front housing, valve mechanism cover, bridge dowels, rocker shaft, and push rod. Tools required and torque specifications are provided where needed to complete the procedures correctly.
Caterpillar cat 308 e2cr mini hydraulic excavator (prefix tmx) service repair...fujsjekskem
This document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator powered by a C3.3B engine. The procedures include removing and installing the crankshaft front seal, idler gear, front housing, valve mechanism cover, bridge dowels, rocker shaft, and push rod. Tools required and torque specifications are provided where needed to complete the procedures correctly.
Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix TMX) Service Repair ...hvy7sbkw8e
The document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator including the crankshaft front seal, idler gear, housing (front), valve mechanism cover, bridge dowels, and rocker shaft and push rod. The instructions include lists of required tools and step-by-step procedures with illustrations for each component. Safety notices are also provided to take precautions when handling fluids and preventing contamination.
Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix TMX) Service Repair ...xiapokang564341
The document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator including the crankshaft front seal, idler gear, housing (front), valve mechanism cover, bridge dowels, and rocker shaft and push rod. The instructions include lists of required tools and step-by-step procedures with illustrations for each component. Safety notices are also provided to take precautions when handling fluids and preventing contamination.
Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix TMX) Service Repair ...wenxian17880
The document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator including the crankshaft front seal, idler gear, housing (front), valve mechanism cover, bridge dowels, and rocker shaft and push rod. The instructions include lists of required tools and step-by-step procedures with illustrations for each component. Safety notices are also provided to take precautions when handling fluids and preventing contamination.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...fikskkdmmd1
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...jdjkskmikdkmd
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...paws21610697
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...cdfvvv1
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...uddksemd8ud
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...f7djidksmd3e
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...yan77xunhao
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...f8usiedkdmm
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...fjskekfseik
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The steps include draining fluids, removing fasteners and components, cleaning parts, applying sealant or lubricant, and reinstalling components in the reverse order of removal while maintaining proper alignment and torque specifications.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix NC5) Service Repa...tuzhiyou2
This document provides instructions for removing and installing various engine components on a 305.5E2 CR Mini Hydraulic Excavator including the inlet manifold, inlet and exhaust valves, engine oil cooler, engine oil pump, and water pump. The procedures describe draining fluids, removing mounting hardware, and installing components in reverse order of removal while taking precautions to contain fluids and avoid contaminants. Torque specifications and required tools are listed for some components.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix NC5) Service Repa...qfyc504378
This document provides removal and installation instructions for various engine components of a 305.5E2 CR Mini Hydraulic Excavator including the inlet manifold, inlet and exhaust valves, engine oil cooler, engine oil pump, water pump, and water temperature regulator. The procedures describe draining fluids, removing bolts and other fasteners, and installing components in the reverse order of removal while taking precautions to contain fluids and avoid contamination.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix NC5) Service Repa...lituo39419496
This document provides removal and installation instructions for various engine components of a 305.5E2 CR Mini Hydraulic Excavator including the inlet manifold, inlet and exhaust valves, engine oil cooler, engine oil pump, water pump, and water temperature regulator. The procedures describe draining fluids, removing bolts and other fasteners, and installing components in the reverse order of removal while taking precautions to contain fluids and avoid contamination.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...tuzhiyou2
The document provides instructions for removing and installing various engine components of a 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions detailing how to remove each part and install the part in reverse order. Safety notices are provided regarding keeping parts clean and containing fluids.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...qfyc504378
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and piston rings. The procedures include lists of required tools and step-by-step instructions describing how to remove and install each part while keeping components clean and ensuring proper alignment of marks and fasteners.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...lituo39419496
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and piston rings. The procedures include lists of required tools and step-by-step instructions describing how to remove and install each part while keeping them clean and ensuring proper alignment of markings.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...hvy7sbkw8e
The document provides instructions for removing and installing various engine components on a 308E Mini Hydraulic Excavator including the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, and crankshaft front seal. The procedures include using various tools to remove components, cleaning parts, applying sealant or oil, and torquing bolts to the specified values. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...xiapokang564341
The document provides instructions for removing and installing various engine components on a 308E Mini Hydraulic Excavator including the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures include using various tools and following steps such as removing bolts, checking alignments, cleaning parts, and lubricating surfaces. Torque specifications and safety notices are also provided.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...wenxian17880
The document provides instructions for removing and installing various engine components on a 308E Mini Hydraulic Excavator including the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures include using various tools and following steps such as removing bolts, seals, and gears in the specified order and installing components by reversing the removal process. Precautions are outlined such as keeping parts clean and containing fluids.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DJX) Service Repair...tuzhiyou2
The document provides instructions for removing and installing various engine components on a 305E2 CR Mini Hydraulic Excavator including the crankshaft rear seal, flywheel housing, crankshaft pulley, and crankshaft front seal. The procedures include removing bolts, seals, and housings and installing new seals using various tools while keeping parts clean to prevent damage and wear.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DJX) Service Repair...qfyc504378
This service repair manual provides instructions for removing and installing various engine components on a 305E2 CR Mini Hydraulic Excavator powered by a C2.4 engine. The document includes procedures for removing and installing the crankshaft rear seal, flywheel housing, crankshaft pulley, and crankshaft front seal. Diagrams illustrate the components and tools needed for each procedure.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DJX) Service Repair...lituo39419496
This service repair manual provides instructions for removing and installing various engine components on a 305E2 CR Mini Hydraulic Excavator powered by a C2.4 engine. The document includes procedures for removing and installing the crankshaft rear seal, flywheel housing, crankshaft pulley, and crankshaft front seal. Diagrams illustrate the components and tools needed for each procedure.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...fujsekmdd8di
The document provides instructions for servicing components of a 308E Mini Hydraulic Excavator powered by a C3.3B engine. It includes procedures for removing and installing the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures describe using various tools and following steps such as loosening bolts, removing seals and gears, checking alignments, applying sealant and oil, and tightening bolts to specified torques. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...fusjekkdmdmd2w
The document provides instructions for removing and installing various engine components on a 308E Mini Hydraulic Excavator including the crankshaft rear seal, wear sleeve, flywheel housing, crankshaft pulley, and crankshaft front seal. The procedures include using various tools to remove components, cleaning parts, applying sealant or oil, and torquing bolts to the specified values. Safety notices are provided to keep parts clean and contain fluids during maintenance.
The document provides instructions for installing a flywheel and crankshaft rear seal on a Caterpillar 3054C engine. It describes cleaning and preparing the components, heating the ring gear to install it on the flywheel, installing guide bolts and lifting brackets to position the flywheel, and tightening the bolts to specification. It also explains that the crankshaft rear seal is replaced as an assembly, cleaning the sealing surfaces, lubricating the new seal, using a plastic sleeve to protect the seal during installation, and tightening setscrews to secure the seal housing.
This document provides instructions for removing and installing a flywheel and crankshaft rear seal on a Caterpillar 416C Backhoe Loader with a 3054 engine. It describes the required tools and multi-step processes which include removing bolts, lifting devices, cleaning parts, and torquing fasteners to the specified values. The document contains illustrations supporting each step of the procedures.
More Related Content
Similar to Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix TMX) Service Repair Manual (TMX00001 and up).pdf
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...cdfvvv1
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...uddksemd8ud
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...f7djidksmd3e
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...yan77xunhao
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...f8usiedkdmm
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...fjskekfseik
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The steps include draining fluids, removing fasteners and components, cleaning parts, applying sealant or lubricant, and reinstalling components in the reverse order of removal while maintaining proper alignment and torque specifications.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix NC5) Service Repa...tuzhiyou2
This document provides instructions for removing and installing various engine components on a 305.5E2 CR Mini Hydraulic Excavator including the inlet manifold, inlet and exhaust valves, engine oil cooler, engine oil pump, and water pump. The procedures describe draining fluids, removing mounting hardware, and installing components in reverse order of removal while taking precautions to contain fluids and avoid contaminants. Torque specifications and required tools are listed for some components.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix NC5) Service Repa...qfyc504378
This document provides removal and installation instructions for various engine components of a 305.5E2 CR Mini Hydraulic Excavator including the inlet manifold, inlet and exhaust valves, engine oil cooler, engine oil pump, water pump, and water temperature regulator. The procedures describe draining fluids, removing bolts and other fasteners, and installing components in the reverse order of removal while taking precautions to contain fluids and avoid contamination.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix NC5) Service Repa...lituo39419496
This document provides removal and installation instructions for various engine components of a 305.5E2 CR Mini Hydraulic Excavator including the inlet manifold, inlet and exhaust valves, engine oil cooler, engine oil pump, water pump, and water temperature regulator. The procedures describe draining fluids, removing bolts and other fasteners, and installing components in the reverse order of removal while taking precautions to contain fluids and avoid contamination.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...tuzhiyou2
The document provides instructions for removing and installing various engine components of a 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions detailing how to remove each part and install the part in reverse order. Safety notices are provided regarding keeping parts clean and containing fluids.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...qfyc504378
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and piston rings. The procedures include lists of required tools and step-by-step instructions describing how to remove and install each part while keeping components clean and ensuring proper alignment of marks and fasteners.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...lituo39419496
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and piston rings. The procedures include lists of required tools and step-by-step instructions describing how to remove and install each part while keeping them clean and ensuring proper alignment of markings.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...hvy7sbkw8e
The document provides instructions for removing and installing various engine components on a 308E Mini Hydraulic Excavator including the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, and crankshaft front seal. The procedures include using various tools to remove components, cleaning parts, applying sealant or oil, and torquing bolts to the specified values. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...xiapokang564341
The document provides instructions for removing and installing various engine components on a 308E Mini Hydraulic Excavator including the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures include using various tools and following steps such as removing bolts, checking alignments, cleaning parts, and lubricating surfaces. Torque specifications and safety notices are also provided.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...wenxian17880
The document provides instructions for removing and installing various engine components on a 308E Mini Hydraulic Excavator including the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures include using various tools and following steps such as removing bolts, seals, and gears in the specified order and installing components by reversing the removal process. Precautions are outlined such as keeping parts clean and containing fluids.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DJX) Service Repair...tuzhiyou2
The document provides instructions for removing and installing various engine components on a 305E2 CR Mini Hydraulic Excavator including the crankshaft rear seal, flywheel housing, crankshaft pulley, and crankshaft front seal. The procedures include removing bolts, seals, and housings and installing new seals using various tools while keeping parts clean to prevent damage and wear.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DJX) Service Repair...qfyc504378
This service repair manual provides instructions for removing and installing various engine components on a 305E2 CR Mini Hydraulic Excavator powered by a C2.4 engine. The document includes procedures for removing and installing the crankshaft rear seal, flywheel housing, crankshaft pulley, and crankshaft front seal. Diagrams illustrate the components and tools needed for each procedure.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DJX) Service Repair...lituo39419496
This service repair manual provides instructions for removing and installing various engine components on a 305E2 CR Mini Hydraulic Excavator powered by a C2.4 engine. The document includes procedures for removing and installing the crankshaft rear seal, flywheel housing, crankshaft pulley, and crankshaft front seal. Diagrams illustrate the components and tools needed for each procedure.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...fujsekmdd8di
The document provides instructions for servicing components of a 308E Mini Hydraulic Excavator powered by a C3.3B engine. It includes procedures for removing and installing the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures describe using various tools and following steps such as loosening bolts, removing seals and gears, checking alignments, applying sealant and oil, and tightening bolts to specified torques. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...fusjekkdmdmd2w
The document provides instructions for removing and installing various engine components on a 308E Mini Hydraulic Excavator including the crankshaft rear seal, wear sleeve, flywheel housing, crankshaft pulley, and crankshaft front seal. The procedures include using various tools to remove components, cleaning parts, applying sealant or oil, and torquing bolts to the specified values. Safety notices are provided to keep parts clean and contain fluids during maintenance.
Similar to Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix TMX) Service Repair Manual (TMX00001 and up).pdf (20)
The document provides instructions for installing a flywheel and crankshaft rear seal on a Caterpillar 3054C engine. It describes cleaning and preparing the components, heating the ring gear to install it on the flywheel, installing guide bolts and lifting brackets to position the flywheel, and tightening the bolts to specification. It also explains that the crankshaft rear seal is replaced as an assembly, cleaning the sealing surfaces, lubricating the new seal, using a plastic sleeve to protect the seal during installation, and tightening setscrews to secure the seal housing.
This document provides instructions for removing and installing a flywheel and crankshaft rear seal on a Caterpillar 416C Backhoe Loader with a 3054 engine. It describes the required tools and multi-step processes which include removing bolts, lifting devices, cleaning parts, and torquing fasteners to the specified values. The document contains illustrations supporting each step of the procedures.
Caterpillar Cat 320D L Excavator (Prefix PHX) Service Repair Manual (PHX00001...fujskkmdmd
The document provides instructions for removing and installing a flywheel on a Caterpillar 320D L excavator. It describes using various tools to remove components like the muffler, flywheel housing, and rear crankshaft seal. Detailed illustrations and cautions are provided for each step. The process involves drilling holes in the crankshaft rear seal before removing it, cleaning and applying compounds to mating surfaces, and checking dowel pins and gaskets before reassembly.
This document provides instructions for removing and installing a flywheel housing on a Caterpillar 3054 engine. The removal procedure involves supporting the engine, removing mounting bolts from the top and bottom of the housing, attaching lifting tools to the housing, and using hammers to separate the housing from the cylinder block. The installation procedure specifies cleaning mating surfaces and inserting a new felt seal if needed before placing the housing on the cylinder block and reinstalling the mounting bolts. Tools including link brackets and lifting devices are required.
This document provides instructions for removing and installing a flywheel housing on a Caterpillar 3054 engine. It outlines the required tools and safety precautions. The removal procedure involves supporting the engine, removing mounting bolts from the top and bottom of the housing, attaching lifting tools, and separating the housing from the cylinder block using light hammer taps if needed. The installation procedure specifies cleaning mating surfaces and tightening mounting bolts to the specified torque.
This document provides instructions for removing and installing a flywheel housing on a Caterpillar 3054 engine. It describes using lifting brackets and removing mounting bolts to detach the housing. Cleaning surfaces and installing new seals is also covered. Dowels align the housing and bolts attach it to the cylinder block with specified torque.
This document provides instructions for removing the crankshaft front seal from a Caterpillar 3054 engine. The procedure involves using a drill bit to drill out the plastic sleeve holding the seal in place. Once drilled out, the seal can be removed from the front cover housing. Proper cleaning of parts and containment of fluids is emphasized to prevent contamination.
Caterpillar Cat 329D L Excavator (Prefix DTZ) Service Repair Manual (DTZ00001...fujskkmdmd
The document provides instructions for removing and installing the valve mechanism cover base and cylinder head on a Caterpillar 329D excavator engine. Key steps include:
1. Removing bolts and disconnecting harness assemblies to remove the valve mechanism cover base.
2. Draining coolant, removing supports and clamps, and disconnecting tubes and hoses to remove the cylinder head.
3. Installing a new gasket and torquing bolts to specified values to install the cylinder head. Reconnecting all tubes, hoses and harness assemblies.
This document provides instructions for removing and installing the water temperature regulator on a Caterpillar C7 engine. It describes:
1. Draining the engine coolant below the level of the water temperature regulator.
2. Disconnecting the hose from the regulator cover by loosening the clamp.
3. Removing the bolts securing the regulator housing and removing the regulator from the engine.
The instructions emphasize cleanliness and safe handling of fluids during maintenance.
Caterpillar Cat 322C FM EXCAVATOR (Prefix C3R) Service Repair Manual (C3R0000...fujskkmdmd
The document provides instructions for removing and installing a unit injector hydraulic pump on a 322C FM EXCAVATOR C3R powered by a 3126B engine. The removal procedure involves disconnecting hoses and lines, removing bolts, and taking off the pump. The installation procedure specifies lubricating seals, installing bolts, reconnecting lines and hoses, and ensuring connections are secure. Separate sections provide instructions for disassembling and assembling a turbocharger on the same engine model.
Caterpillar Cat 322C FM EXCAVATOR (Prefix BPH) Service Repair Manual (BPH0000...fujskkmdmd
This document provides instructions for removing and installing a governor from a 322C FM EXCAVATOR engine. It describes disconnecting linkages, removing mounting bolts and clips, and using special tools. Proper cleaning and lubrication of seals is emphasized. References are provided for additional information on governor inspection and testing procedures.
Caterpillar Cat 322C FM EXCAVATOR (Prefix CAM) Service Repair Manual (CAM0000...fujskkmdmd
The document provides instructions for removing the engine oil filter base from a 322C FM excavator. The procedure involves first removing the turbocharger. Then, using a strap wrench, loosen the oil filter base by turning it counterclockwise. Finally, clean the mating surface before installing the new oil filter base. The summary is provided in 3 sentences or less as requested.
Caterpillar Cat 320D L Excavator (Prefix KLM) Service Repair Manual (KLM00001...fujskkmdmd
This document provides instructions for removing and installing the crankshaft front seal of a Caterpillar C6.4 engine.
The removal procedure involves using a slide hammer puller to remove the existing seal after drilling holes in it. For installation, a front seal installer tool is used to carefully push the new seal onto the crankshaft flange. Proper cleaning and containment of fluids is emphasized.
The document provides instructions for removing and installing a flywheel on a Caterpillar 320D L excavator. It describes using various tools to remove components like the muffler, flywheel housing, and rear crankshaft seal. Detailed illustrations and cautions are provided for each step. The process involves drilling holes in the crankshaft rear seal before removing it, cleaning and applying compounds to mating surfaces, and checking dowel pins and gaskets before reassembly.
Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix EC2) Service Repair ...fujskkmdmd
This document provides instructions for removing and installing various engine components on a Caterpillar 308E2CR Mini Hydraulic Excavator, including the fuel injection pump, electronic unit injectors, turbocharger, and mass air flow pressure sensor. The procedures describe using required tools, disconnecting fuel lines and electrical connections, removing mounting hardware, and installing replacement components in the reverse order while applying specified torques. Safety notices warn technicians to allow the fuel system to purge before opening lines and ensure components like the mass air flow sensor are oriented correctly.
Caterpillar Cat 320D L Excavator (Prefix JFZ) Service Repair Manual (JFZ00001...fujskkmdmd
The document provides instructions for removing and installing a flywheel housing on a 320D excavator. It describes removing bolts and washers to separate the housing from the cylinder block. It also includes removing the oil seal from the housing using a driver group tool. Reinstallation involves installing a new gasket and oil seal, then securing the housing with bolts and washers.
This document provides instructions for removing the crankshaft front seal from a Caterpillar C6.4 engine. The procedure involves using a slide hammer puller tool to remove the seal from the front of the crankshaft. Technicians are advised to keep all parts clean and contain fluids properly during repair work. Removal of the seal prepares the engine for further disassembly or repair of crankshaft components.
Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix MY2) Service Repair ...fujskkmdmd
The document provides instructions for servicing components of a 308E2CR Mini Hydraulic Excavator engine. It includes procedures for removing and installing components like the exhaust gas recirculation valve, fumes disposal filter, exhaust manifold, and diesel particulate filter. Safety precautions are provided, and the work is to be done in the specified order while applying any recommended lubricants to bolts or studs.
Caterpillar Cat 308E Mini Hydraulic Excavator (Prefix TAZ) Service Repair Man...fujskkmdmd
The document provides instructions for removing and installing various engine components on a 308E Mini Hydraulic Excavator including the crankshaft rear seal, wear sleeve, flywheel housing, crankshaft pulley, and crankshaft front seal. The procedures include using various tools to remove components, cleaning parts, applying sealant or oil, and torquing bolts to the specified values. Safety notices are provided to keep parts clean and contain fluids during maintenance.
Caterpillar Cat 308E2CR Mini Hydraulic Excavator (Prefix W8S) Service Repair ...fujskkmdmd
The document provides instructions for removing and installing various engine components on a 308E2CR Mini Hydraulic Excavator, including:
- Removing and installing the diesel particulate filter.
- Removing and installing the inlet manifold.
- Removing and installing the inlet and exhaust valve springs.
- Removing and installing the inlet and exhaust valves.
Detailed step-by-step instructions are provided along with illustrations to correctly complete each procedure. Safety precautions and notes are included throughout.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 308E2 CR MINI HYD EXCAVATOR TMX
Configuration: 308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C3.3B Tier 4 Final and EU Stage 3B Engines for Caterpillar Built Machines
Media Number -UENR3278-07 Publication Date -01/09/2014 Date Updated -11/07/2016
i05306703
Crankshaft Front Seal - Remove and Install
SMCS - 1160-010
Removal Procedure
Start By:
a. Remove the crankshaft pulley.
Note: Refer to Specifications, "Engine Design" for non-specified engine torque values.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1/3
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 1 g02795123
Illustration 2 g02795124
1. Use a suitable pry bar to remove crankshaft front seal (1).
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 390-1140 Driver 1
2/3
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 3 g02796112
Illustration 4 g02795123
1. Position crankshaft front seal (1) on Tooling (A). Install crankshaft front seal (1) on the
crankshaft.
End By:
a. Install the crankshaft pulley.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jan 7 23:45:10 UTC+0800 2020
3/3
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 308E2 CR MINI HYD EXCAVATOR TMX
Configuration: 308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C3.3B Tier 4 Final and EU Stage 3B Engines for Caterpillar Built Machines
Media Number -UENR3278-07 Publication Date -01/09/2014 Date Updated -11/07/2016
i05306714
Idler Gear - Remove and Install
SMCS - 1206
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 390-1135 Idler Gear Tool 1
Start By:
a. Remove the rear housing.
Note: Refer to Specifications, "Engine Design" for non-specified engine torque values.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
1/4
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g02795977
Illustration 2 g02795978
Illustration 3 g02795981
Alignment of timing marks
2/4
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. 1. Find top dead center for number 4 piston. Refer to Testing and Adjusting, "Finding Top
Center for No. 4 Piston".
2. Ensure that Timing Marks (X) on the camshaft gear and the crankshaft gear are aligned.
Refer to Illustration 1.
3. Ensure that Timing Marks (Y) on the idler gear and the camshaft gear are aligned. Refer to
Illustration 2.
4. Ensure that Timing Marks (Z) on the idler gear and the fuel injection pump gear are aligned.
Refer to Illustration 3.
Illustration 4 g02795984
5. Remove bolts (2), washer (3), and the idler shaft from idler gear (1). Remove idler gear (1)
and the washer.
Illustration 5 g02795985
6. Use Tooling (A) to remove idler gear bearing (4) from idler gear (1).
Installation Procedure
1. Install idler gear (1) in the reverse order of removal.
a. Tighten bolts (2) to a torque of 49 to 55 N·m (36 to 41 lb ft).
3/4
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. b. Ensure that the gears, cylinder block surface, and idler gear (1) are clean and free
from wear or damage. If necessary, replace any components that are worn or
damaged.
c. Lubricate idler gear bearing surface (4) with clean engine oil.
d. Check oil clearance between the idler gear shaft and the idler gear bushing. Refer to
Specifications, "Gear Group (Front)" for allowable clearance.
e. Check the idler gear shaft outer diameter and the inner diameter for the idler gear
bushing.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jan 7 23:46:07 UTC+0800 2020
4/4
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 308E2 CR MINI HYD EXCAVATOR TMX
Configuration: 308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C3.3B Tier 4 Final and EU Stage 3B Engines for Caterpillar Built Machines
Media Number -UENR3278-07 Publication Date -01/09/2014 Date Updated -11/07/2016
i05306965
Housing (Front) - Remove and Install
SMCS - 1151-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Three Bond 1217H 1
Start By:
a. Remove the crankshaft front seal.
Note: Refer to Specifications, "Engine Design" for non-specified engine torque values.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
1/4
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1. Drain the coolant from the cooling system into a suitable container for storage or disposal.
Illustration 1 g02795275
2. Disconnect hose assemblies (1) and (2) from the oil cooler.
Illustration 2 g02795251
3. Remove bolts (4).
4. Remove front housing (3) and the gasket.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
2/4
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Contaminants may cause rapid wear and shortened component life.
1. Ensure that the front housing is clean and free from damage. If necessary, replace the front
housing.
2. Clean all the gasket surfaces of the cylinder block.
Illustration 3 g02864317
3. Apply Tooling A to the seam between the lower crankcase section (6) and the upper
crankcase section (5).
Illustration 4 g02795251
4. Align a new gasket and install the gasket to the cylinder block.
5. Tighten 13 bolts (4) in a side to side sequence. Tighten bolts (4) to a torque of 24 to 27 N·m
(212 to 239 lb in)
3/4
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 5 g02795275
6. Connect hose assemblies (1) and (2) to the oil cooler.
7. Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling
System Coolant (ELC) - Change" for the correct draining and filling procedures.
End By:
a. Install the crankshaft front seal.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jan 7 23:47:03 UTC+0800 2020
4/4
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 308E2 CR MINI HYD EXCAVATOR TMX
Configuration: 308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C3.3B Tier 4 Final and EU Stage 3B Engines for Caterpillar Built Machines
Media Number -UENR3278-07 Publication Date -01/09/2014 Date Updated -11/07/2016
i05228712
Valve Mechanism Cover - Remove and Install
SMCS - 1107-010
Removal Procedure
Start By:
a. Remove the glow plugs.
b. Remove the fuel injection lines.
Note: Refer to Specification UENR3421 "Engine Design" for non-specified engine Torque
Values.
Illustration 1 g03339679
1. Remove bolts (1) to remove brackets.
2. Disconnect hose assemblies (2) and (3).
1/2
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 2 g03339695
3. Remove bolts (4).
4. Remove valve mechanism cover (5).
5. If necessary, remove O-ring seal in valve mechanism cover (5) and replace with new.
Installation Procedure
1. Install valve mechanism cover (5) in the reverse order of removal.
a. Tighten bolts (4) to a torque of 10 to 11 N·m (87 to 100 lb in).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jan 7 23:48:00 UTC+0800 2020
2/2
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 308E2 CR MINI HYD EXCAVATOR TMX
Configuration: 308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C3.3B Tier 4 Final and EU Stage 3B Engines for Caterpillar Built Machines
Media Number -UENR3278-07 Publication Date -01/09/2014 Date Updated -11/07/2016
i05223576
Bridge Dowels - Remove and Install
SMCS - 1100-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-0944 Dowel Puller Gp 1
Start By:
a. Remove valve springs.
Note: Refer to Specification UENR3421 "Engine Design" for non-specified engine Torque
Values.
Illustration 1 g02882621
1/2
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
17. 1. Install Tooling (A) and remove bridge dowel (1).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
B 390-1142 Spacer 1
Illustration 2 g02882716
Illustration 3 g02882838
1. Use a press or hammer to drive bridge dowel (1) to a height that is flush with Tooling (B).
End By:
a. Install valve springs.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jan 7 23:48:57 UTC+0800 2020
2/2
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 308E2 CR MINI HYD EXCAVATOR TMX
Configuration: 308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C3.3B Tier 4 Final and EU Stage 3B Engines for Caterpillar Built Machines
Media Number -UENR3278-07 Publication Date -01/09/2014 Date Updated -11/07/2016
i05221855
Rocker Shaft and Push Rod - Remove and Install
SMCS - 1102-010; 1208-010
Removal Procedure
Start By:
a. Remove valve mechanism cover.
Note: Refer to Specification UENR03421 "Engine Design" for non-specified engine Torque
Values.
Illustration 1 g03338660
1. Remove bolts (3) and tube assembly (4).
2. Remove nuts (2) and brackets (1).
1/2
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 2 g03338669
3. Remove bolts (5) from rocker shaft assembly (6).
4. Remove rocker shaft assembly (6) from cylinder head (9).
5. Place an identification mark on pushrods (8) in order to show the location. Remove
pushrods (8) from cylinder head (9).
Note: Identification will ensure that the pushrods can be reinstalled in the original positions.
Do not interchange the positions of used pushrods.
6. Remove valve bridge arms (7).
Installation Procedure
1. Install rocker shaft assembly (6) and pushrods (8) in the reverse order of removal.
a. Install bolts (5) and tighten to a torque of 49 to 55 N·m (37 to 41 lb ft).
b. Position brackets (1) and install nuts (2). Tighten nuts (2) to a torque of 24 to 27 N·m
(18 to 20 lb ft) .
2. Position tube assembly (4) and install bolts (3). Tighten bolts (3) to a torque of
9.8 to 11.2 N·m (87 to 100 lb in).
3. Adjust the inlet valve lash and the exhaust valve lash to 0.13 to 0.17 mm
(0.005 to 0.007 inch). Refer to Testing and Adjusting, "Engine Valve Lash -
Inspect/Adjust".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jan 7 23:49:54 UTC+0800 2020
2/2
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 308E2 CR MINI HYD EXCAVATOR TMX
Configuration: 308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C3.3B Tier 4 Final and EU Stage 3B Engines for Caterpillar Built Machines
Media Number -UENR3278-07 Publication Date -01/09/2014 Date Updated -11/07/2016
i05307420
Rocker Shaft - Disassemble
SMCS - 1102-015
Disassembly Procedure
Start By:
a. Remove the rocker shaft and pushrods.
Illustration 1 g03367345
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
1/2
308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C...
2020/1/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...