This document provides disassembly instructions for a piston motor travel component in 46 steps. It begins by having the user remove identification marks and plug lines before disassembling external components like covers, wires, gears, and seals. Internal components are then removed, including carriers, pistons, springs, valves, and seals. Precise tools and cleanliness are emphasized throughout to facilitate reassembly.
Caterpillar cat 303.5 mini hydraulic excavator (prefix dch) service repair ma...dfujdjkskekmmd
This document provides disassembly instructions for a piston motor travel component in 46 steps. It begins by having the travel motor removed and then lists each part that needs to be dismantled, including gears, bearings, seals, plates, and housings. Special tools are required for tasks like removing hidden ring nuts and pulling bearings. Cleanliness is emphasized throughout to prevent contamination.
Caterpillar cat 247 b3 multi terrain loader (prefix esl) service repair manua...ujfjjsjekkmsmd
This document provides disassembly instructions for a piston motor (hydrostatic) on a Caterpillar 247B3 Multi Terrain Loader. It lists 31 steps to fully disassemble the piston motor, including removing covers, gaskets, seals, discs, shafts, bearings, housings and other internal components. Detailed illustrations accompany each step to show how to use various tools to remove each part in the correct order while taking safety precautions. The overall process will completely disassemble the piston motor for cleaning or repair purposes.
Caterpillar cat m322 c wheeled excavator (prefix bdy) service repair manual (...udjfjkskekmdm
The document provides instructions for disassembling the front and rear axles of an M322C wheeled excavator. It lists over 40 individual steps to remove components such as carriers, hubs, brakes, gears, seals and bearings. Precautions are included to release hydraulic pressure and contain fluids before disassembly. Required tools are specified for removing fasteners and pulling or pressing out parts. Detailed illustrations accompany each step to show the correct procedure.
Caterpillar cat 302.5 c mini hydraulic excavator (prefix gbb) service repair ...fjsjekdmmeme
The document provides instructions for disassembling and assembling the final drive and travel motor of a 302.5C Mini Hydraulic Excavator. It lists the required tools and presents 32 steps for disassembly that include removing springs, pins, seals, bearings and other components. It then lists the assembly steps in reverse order with notes about properly installing spring loaded parts to avoid injury.
Caterpillar cat 312 b l excavator (prefix 9nw) service repair manual (9nw0000...fjskkksmemm
The document provides instructions for disassembling and assembling the final drive of a 312B excavator. Some key steps include:
1. Removing the final drive and travel motor and disassembling components like springs, pistons, disks, gears, and seals.
2. Using various tools to remove parts like retaining rings, snap rings, nuts, and shafts.
3. Inspecting and repairing parts as needed before assembly.
4. Reassembling components in reverse order and verifying clearances and heights using tools like dial indicators.
This document provides instructions for disassembling and assembling the piston motor of a 216B3 Skid Steer Loader. The disassembly process involves removing 25 parts from the motor in a specific order, taking care when removing springs. The assembly process reverses the disassembly steps, heating some parts before installing and using tools to install retaining rings and shafts.
Caterpillar cat 308 e2sr mini hydraulic excavator (prefix jc5) service repair...jfjskeksemmme
This document provides disassembly and assembly instructions for the final drive and travel motor of a 308E2SR Mini Hydraulic Excavator. It lists 40 steps to disassemble the components and 38 tools and parts needed for assembly. The summary describes removing components like relief valves, springs, spools, plugs, pistons, gears, seals and more. Reassembly follows the reverse order and includes applying grease and torque specifications.
This document provides instructions for disassembling a piston pump. It lists 71 steps and the required tools. The pump is first removed from the vehicle. Then various components like fittings, springs, seals and plates are removed. Measurements are taken to aid reassembly. Pins, shafts, bearings and other internal parts are then dismantled from the housing. Detailed illustrations accompany each step. The process is repeated for both ends of the pump.
Caterpillar cat 303.5 mini hydraulic excavator (prefix dch) service repair ma...dfujdjkskekmmd
This document provides disassembly instructions for a piston motor travel component in 46 steps. It begins by having the travel motor removed and then lists each part that needs to be dismantled, including gears, bearings, seals, plates, and housings. Special tools are required for tasks like removing hidden ring nuts and pulling bearings. Cleanliness is emphasized throughout to prevent contamination.
Caterpillar cat 247 b3 multi terrain loader (prefix esl) service repair manua...ujfjjsjekkmsmd
This document provides disassembly instructions for a piston motor (hydrostatic) on a Caterpillar 247B3 Multi Terrain Loader. It lists 31 steps to fully disassemble the piston motor, including removing covers, gaskets, seals, discs, shafts, bearings, housings and other internal components. Detailed illustrations accompany each step to show how to use various tools to remove each part in the correct order while taking safety precautions. The overall process will completely disassemble the piston motor for cleaning or repair purposes.
Caterpillar cat m322 c wheeled excavator (prefix bdy) service repair manual (...udjfjkskekmdm
The document provides instructions for disassembling the front and rear axles of an M322C wheeled excavator. It lists over 40 individual steps to remove components such as carriers, hubs, brakes, gears, seals and bearings. Precautions are included to release hydraulic pressure and contain fluids before disassembly. Required tools are specified for removing fasteners and pulling or pressing out parts. Detailed illustrations accompany each step to show the correct procedure.
Caterpillar cat 302.5 c mini hydraulic excavator (prefix gbb) service repair ...fjsjekdmmeme
The document provides instructions for disassembling and assembling the final drive and travel motor of a 302.5C Mini Hydraulic Excavator. It lists the required tools and presents 32 steps for disassembly that include removing springs, pins, seals, bearings and other components. It then lists the assembly steps in reverse order with notes about properly installing spring loaded parts to avoid injury.
Caterpillar cat 312 b l excavator (prefix 9nw) service repair manual (9nw0000...fjskkksmemm
The document provides instructions for disassembling and assembling the final drive of a 312B excavator. Some key steps include:
1. Removing the final drive and travel motor and disassembling components like springs, pistons, disks, gears, and seals.
2. Using various tools to remove parts like retaining rings, snap rings, nuts, and shafts.
3. Inspecting and repairing parts as needed before assembly.
4. Reassembling components in reverse order and verifying clearances and heights using tools like dial indicators.
This document provides instructions for disassembling and assembling the piston motor of a 216B3 Skid Steer Loader. The disassembly process involves removing 25 parts from the motor in a specific order, taking care when removing springs. The assembly process reverses the disassembly steps, heating some parts before installing and using tools to install retaining rings and shafts.
Caterpillar cat 308 e2sr mini hydraulic excavator (prefix jc5) service repair...jfjskeksemmme
This document provides disassembly and assembly instructions for the final drive and travel motor of a 308E2SR Mini Hydraulic Excavator. It lists 40 steps to disassemble the components and 38 tools and parts needed for assembly. The summary describes removing components like relief valves, springs, spools, plugs, pistons, gears, seals and more. Reassembly follows the reverse order and includes applying grease and torque specifications.
This document provides instructions for disassembling a piston pump. It lists 71 steps and the required tools. The pump is first removed from the vehicle. Then various components like fittings, springs, seals and plates are removed. Measurements are taken to aid reassembly. Pins, shafts, bearings and other internal parts are then dismantled from the housing. Detailed illustrations accompany each step. The process is repeated for both ends of the pump.
Caterpillar cat 303.5 mini hydraulic excavator (prefix dch) service repair ma...fjskkksmemm
The document provides disassembly instructions for a piston motor travel component in 3 sentences or less:
The document outlines 46 steps to fully disassemble a piston motor travel component for a 303.5 Mini Hydraulic Excavator, involving the removal of covers, gears, seals, valves, springs, pistons, and other internal parts. Tools required are identified for tasks like removing snap rings, nuts, and pulling bearings. Cleanliness during disassembly is emphasized to prevent contamination of parts.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fujsjefjkskfmsme
The document provides disassembly instructions for the piston motor (travel) of a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the travel motor. The steps include removing covers, gears, bearings, seals, pins, springs, and other internal components. Tools required are also listed. Cleanliness during disassembly is emphasized to prevent contamination of parts.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fjjskekdmem
This document provides instructions for disassembling and assembling the piston motor for a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the piston motor down to individual components. It provides diagrams and references specific tools required at each step. The summary then lists the assembly procedure and notes to clean all parts thoroughly and replace any worn or damaged parts before reassembling.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...dfujdjkskekmmd
This document provides instructions for disassembling and assembling the piston motor for a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the piston motor down to individual components. It provides diagrams and references specific tools required at each step. The summary then lists the assembly procedure and notes to clean all parts thoroughly and replace any worn or damaged parts before reassembling.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fjsjjdkemmde
The document provides instructions for disassembling and assembling the piston motor for a 303.5 Mini Hydraulic Excavator. It lists 48 steps to disassemble the various components of the motor including removing gears, seals, springs, pistons, and housing pieces. It also provides notes on cleaning parts and applying oil before assembly. The assembly procedure is listed as reversing the disassembly steps and replacing all O-rings and seals.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fusefjjskekmm
This document provides instructions for disassembling and assembling the piston motor for a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the piston motor down to individual components. It provides diagrams and references specific tools required at each step. The summary then lists the assembly procedure and notes to clean all parts thoroughly and replace any worn or damaged parts before reassembling.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fjskkksmemm
The document provides step-by-step instructions for disassembling and assembling the piston motor used for travel in a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the motor by removing components like gears, seals, springs, and housing pieces. It also lists the required tools and notes on cleaning and lubricating parts during assembly. The instructions are detailed with illustrations to clearly show each step in the process.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engines and other relevant components. The manual provides specifications, torque values, and other technical information needed for repair and maintenance of these vehicles.
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly of the transmission assembly. Procedures are outlined in steps and key points are called out, such as match marking parts during removal and selection of spacer thickness. Standard torque specifications are provided throughout.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engine repair. The manual sections include general information, the engine, transmission, axles, steering, brakes, mast, hydraulic systems and more.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engine repair. The manual sections include general information, the engine, transmission, axles, steering, brakes, mast, hydraulic systems and more.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engines and other relevant components. The manual provides specifications, torque values, and other technical information needed for repair and maintenance of these vehicles.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engine repair. The manual sections include general information, the engine, transmission, axles, steering, brakes, mast, hydraulic systems and more.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engines and other relevant components. The manual provides specifications, torque values, and other technical information needed for repair and maintenance of these vehicles.
1. This manual covers service procedures for Toyota forklifts including engine, transmission, steering, and brake systems.
2. It provides illustrations and descriptions to guide technicians through removal, inspection, and reinstallation of components.
3. The manual also includes specifications, torque values, and periodic maintenance schedules.
Massey ferguson mf165 tractors parts catalogue manualfujsjefjkskfmsme
This document provides part numbers and descriptions for components related to engines, electrical equipment, alternators, generators, and starters for Massey Ferguson tractors models MF 165, 168, 185, and 188. It includes 42 items that make up the engine installation for these tractor models, with part numbers, quantities, descriptions and comments for each item. It also provides similar listings for the electrical equipment, alternator, generator, and starter for the tractors.
Massey ferguson mf158 tractor parts catalogue manualfujsjefjkskfmsme
This document provides a parts list and diagrams for the engine and various electrical components of Massey Ferguson 155/158 tractors. It includes over 30 items related to the engine with part numbers and descriptions. The alternator, generator, starter motor and electrical equipment sections list additional parts with numbers and comments. Diagrams show the layout and connections of components on the engine and relevant systems.
Massey ferguson mf155 tractor parts catalogue manualfujsjefjkskfmsme
This document provides a parts list and diagrams for the engine and various electrical components of Massey Ferguson 155/158 tractors. It includes over 30 items related to the engine with part numbers and descriptions. The alternator, generator, starter motor and other electrical equipment are also detailed with multiple parts listed for each component. Diagrams show the layout and connections of systems on the tractor.
Massey ferguson mf140 tractor parts catalogue manualfujsjefjkskfmsme
This document contains parts lists and descriptions for engines, starters, generators, and other accessories for Massey Ferguson 133, 135, and 140 tractors. It includes over 30 parts with descriptions and part numbers. Notes provide additional details about the parts and which tractor models or engine types they are for.
Massey ferguson mf135 tractor parts catalogue manualfujsjefjkskfmsme
This document contains parts lists and descriptions for engines, starters, generators, and other accessories for Massey Ferguson 133, 135, and 140 tractors. It includes over 30 parts with descriptions and part numbers. Notes provide additional details about the parts and which tractor models or engine types they are for.
Massey ferguson mf133 tractor parts catalogue manualfujsjefjkskfmsme
This document contains parts lists and descriptions for engines, starters, generators, and other accessories for Massey Ferguson 133, 135, and 140 tractors. It includes over 30 parts with descriptions and part numbers. Notes provide additional details on the parts and which tractor models or engine types they are for.
Massey ferguson mf super 90 tractor parts catalogue manualfujsjefjkskfmsme
This document contains a parts list for a Massey Ferguson MF Super 90 tractor engine. It includes 38 items categorized as engine gasket sets for both gas and LP fuel types. The gasket sets include various cylinder head, block, valve cover, and crankcase gaskets and seals to replace worn parts and ensure proper sealing when servicing the engine.
More Related Content
Similar to Caterpillar cat 303.5 mini hydraulic excavator (prefix dch) service repair manual (dch00001 and up)
Caterpillar cat 303.5 mini hydraulic excavator (prefix dch) service repair ma...fjskkksmemm
The document provides disassembly instructions for a piston motor travel component in 3 sentences or less:
The document outlines 46 steps to fully disassemble a piston motor travel component for a 303.5 Mini Hydraulic Excavator, involving the removal of covers, gears, seals, valves, springs, pistons, and other internal parts. Tools required are identified for tasks like removing snap rings, nuts, and pulling bearings. Cleanliness during disassembly is emphasized to prevent contamination of parts.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fujsjefjkskfmsme
The document provides disassembly instructions for the piston motor (travel) of a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the travel motor. The steps include removing covers, gears, bearings, seals, pins, springs, and other internal components. Tools required are also listed. Cleanliness during disassembly is emphasized to prevent contamination of parts.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fjjskekdmem
This document provides instructions for disassembling and assembling the piston motor for a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the piston motor down to individual components. It provides diagrams and references specific tools required at each step. The summary then lists the assembly procedure and notes to clean all parts thoroughly and replace any worn or damaged parts before reassembling.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...dfujdjkskekmmd
This document provides instructions for disassembling and assembling the piston motor for a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the piston motor down to individual components. It provides diagrams and references specific tools required at each step. The summary then lists the assembly procedure and notes to clean all parts thoroughly and replace any worn or damaged parts before reassembling.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fjsjjdkemmde
The document provides instructions for disassembling and assembling the piston motor for a 303.5 Mini Hydraulic Excavator. It lists 48 steps to disassemble the various components of the motor including removing gears, seals, springs, pistons, and housing pieces. It also provides notes on cleaning parts and applying oil before assembly. The assembly procedure is listed as reversing the disassembly steps and replacing all O-rings and seals.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fusefjjskekmm
This document provides instructions for disassembling and assembling the piston motor for a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the piston motor down to individual components. It provides diagrams and references specific tools required at each step. The summary then lists the assembly procedure and notes to clean all parts thoroughly and replace any worn or damaged parts before reassembling.
Caterpillar cat 303.5 mini hydraulic excavator (prefix afw) service repair ma...fjskkksmemm
The document provides step-by-step instructions for disassembling and assembling the piston motor used for travel in a 303.5 Mini Hydraulic Excavator. It lists 48 steps to fully disassemble the motor by removing components like gears, seals, springs, and housing pieces. It also lists the required tools and notes on cleaning and lubricating parts during assembly. The instructions are detailed with illustrations to clearly show each step in the process.
Similar to Caterpillar cat 303.5 mini hydraulic excavator (prefix dch) service repair manual (dch00001 and up) (7)
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engines and other relevant components. The manual provides specifications, torque values, and other technical information needed for repair and maintenance of these vehicles.
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly of the transmission assembly. Procedures are outlined in steps and key points are called out, such as match marking parts during removal and selection of spacer thickness. Standard torque specifications are provided throughout.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engine repair. The manual sections include general information, the engine, transmission, axles, steering, brakes, mast, hydraulic systems and more.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engine repair. The manual sections include general information, the engine, transmission, axles, steering, brakes, mast, hydraulic systems and more.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engines and other relevant components. The manual provides specifications, torque values, and other technical information needed for repair and maintenance of these vehicles.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engine repair. The manual sections include general information, the engine, transmission, axles, steering, brakes, mast, hydraulic systems and more.
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engines and other relevant components. The manual provides specifications, torque values, and other technical information needed for repair and maintenance of these vehicles.
1. This manual covers service procedures for Toyota forklifts including engine, transmission, steering, and brake systems.
2. It provides illustrations and descriptions to guide technicians through removal, inspection, and reinstallation of components.
3. The manual also includes specifications, torque values, and periodic maintenance schedules.
Massey ferguson mf165 tractors parts catalogue manualfujsjefjkskfmsme
This document provides part numbers and descriptions for components related to engines, electrical equipment, alternators, generators, and starters for Massey Ferguson tractors models MF 165, 168, 185, and 188. It includes 42 items that make up the engine installation for these tractor models, with part numbers, quantities, descriptions and comments for each item. It also provides similar listings for the electrical equipment, alternator, generator, and starter for the tractors.
Massey ferguson mf158 tractor parts catalogue manualfujsjefjkskfmsme
This document provides a parts list and diagrams for the engine and various electrical components of Massey Ferguson 155/158 tractors. It includes over 30 items related to the engine with part numbers and descriptions. The alternator, generator, starter motor and electrical equipment sections list additional parts with numbers and comments. Diagrams show the layout and connections of components on the engine and relevant systems.
Massey ferguson mf155 tractor parts catalogue manualfujsjefjkskfmsme
This document provides a parts list and diagrams for the engine and various electrical components of Massey Ferguson 155/158 tractors. It includes over 30 items related to the engine with part numbers and descriptions. The alternator, generator, starter motor and other electrical equipment are also detailed with multiple parts listed for each component. Diagrams show the layout and connections of systems on the tractor.
Massey ferguson mf140 tractor parts catalogue manualfujsjefjkskfmsme
This document contains parts lists and descriptions for engines, starters, generators, and other accessories for Massey Ferguson 133, 135, and 140 tractors. It includes over 30 parts with descriptions and part numbers. Notes provide additional details about the parts and which tractor models or engine types they are for.
Massey ferguson mf135 tractor parts catalogue manualfujsjefjkskfmsme
This document contains parts lists and descriptions for engines, starters, generators, and other accessories for Massey Ferguson 133, 135, and 140 tractors. It includes over 30 parts with descriptions and part numbers. Notes provide additional details about the parts and which tractor models or engine types they are for.
Massey ferguson mf133 tractor parts catalogue manualfujsjefjkskfmsme
This document contains parts lists and descriptions for engines, starters, generators, and other accessories for Massey Ferguson 133, 135, and 140 tractors. It includes over 30 parts with descriptions and part numbers. Notes provide additional details on the parts and which tractor models or engine types they are for.
Massey ferguson mf super 90 tractor parts catalogue manualfujsjefjkskfmsme
This document contains a parts list for a Massey Ferguson MF Super 90 tractor engine. It includes 38 items categorized as engine gasket sets for both gas and LP fuel types. The gasket sets include various cylinder head, block, valve cover, and crankcase gaskets and seals to replace worn parts and ensure proper sealing when servicing the engine.
Massey ferguson mf 6713 r tractor (eco4 tier 2 3 ; br) parts catalogue manualfujsjefjkskfmsme
This document contains a table of contents and parts list for an MF 6713R tractor engine. The table of contents lists 19 sections that cover various engine and tractor systems. The parts lists include over 30 individual parts for assemblies like the cylinder block, crankshaft, camshaft, cylinder head, intake manifold, and turbocharger.
Massey ferguson mf 5608 tractor (c339061 h349047) parts catalogue manualfujsjefjkskfmsme
The document provides a parts list and technical specifications for the timing gear housing of a Massey Ferguson MF 5608 tractor. It includes 27 items such as the timing gear case, idler gear, crankshaft seal, various screws and pins. Notes indicate applicability based on serial number and whether items are included in a gasket set. The list is intended to support maintenance and repair of the timing gear housing component.
Massey ferguson mf 3455 cm crawler type tractor parts catalogue manualfujsjefjkskfmsme
This document provides part numbers and descriptions for components of a Massey Ferguson MF 3455 C/CF/CM crawler-type tractor engine. It includes listings for the engine assembly, short engine, cylinder block, camshaft, pistons and connecting rods, end cover, cylinder head, rocker shaft, and fuel injection equipment. The listings provide item numbers, part numbers, quantities, descriptions, and in some cases additional details like replacement information.
This document provides part numbers and descriptions for components of a Massey Ferguson MF 3455 C/CF/CFM crawler tractor engine. It includes listings of parts for the engine assembly, short engine, cylinder block, camshaft, pistons/connecting rods, end cover, cylinder head, and rocker shaft. Each item lists the part number, quantity, description, and notes whether it is a component of a larger assembly.
Massey ferguson mf 3455 cf crawler type tractor parts catalogue manualfujsjefjkskfmsme
This document provides part numbers and descriptions for components of a Massey Ferguson MF 3455 C/CF/CM crawler-type tractor engine. It includes listings for the engine assembly, short engine, cylinder block, camshaft, pistons and connecting rods, end cover, cylinder head, rocker shaft, and fuel injection equipment. The listings provide item numbers, part numbers, quantities, descriptions, and in some cases additional details like replacement information.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
2. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 303.5 MINI HYD EXCAVATOR DCH
Configuration: 303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 3013 Engine
Disassembly and Assembly
303.5 Mini Hydraulic Excavator Machine Systems
Media Number -RENR3538-02 Publication Date -01/05/2007 Date Updated -15/05/2007
i02763565
Piston Motor (Travel) - Disassemble
SMCS - 4351-015; 5058-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
(A) 1U-7600 Slide Hammer 1
(B) 205-0633 Spanner Wrench 1
(C) 9S-9152 Bearing Puller 1
(D) 1P-0510 Driver Group 1
(E) 1P-1862 Snap Ring Pliers 1
(F) 5B-0841 Bolt 1
(G) 6B-6683 Nut 2
Start By:
A. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove" in
this manual.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
1/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 3013 E...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on the travel motor and on all lines for installation purposes. Plug
all lines. This will help to prevent fluid loss and this helps to keep contaminants from entering the
system.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
1. Put an alignment mark across the section of the travel motor for assembly purposes. The
parts must be reinstalled in the original locations of the parts.
Illustration 1 g00774455
2. Remove plug (2) , plug (3) , plug (4) , and the O-ring seals.
2/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 3013 E...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 2 g00776164
3. Install Tooling (F) and (G) at opening (2a) . Use opening (3A) in order to remove wire (5) .
Illustration 3 g00775832
4. Install Tooling (F) and Tooling (G) .
Illustration 4 g00776141
3/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 3013 E...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. 5. Remove wire (5) . through opening (3a) . Pull wire (5) and turn cover (1) in order to remove
the wire from the motor assembly.
Illustration 5 g00774466
6. Use Tooling (A) in order to remove cover (1) .
Illustration 6 g00774472
7. Remove O-ring seal (6) .
4/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 3013 E...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 10 g00774486
11. Remove three bearings (10) .
Illustration 11 g00774487
12. Remove carrier (11) .
6/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 3013 E...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 12 g00774490
13. Remove three bearing races (12) .
Illustration 13 g00774491
14. Remove sun gear (13) . Remove four screws (14) .
Illustration 14 g00774566
15. Remove ring (15) .
7/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 3013 E...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 15 g00774575
16. Remove four gears (16) .
Illustration 16 g00774577
17. Remove four bearings (17) .
Illustration 17 g00774580
18. Remove four bearing races (18) . Remove four washers (19) .
8/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 3013 E...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 18 g00775038
19. Remove two plugs (20) .
Illustration 19 g00774582
20. Use Tooling (B) in order to remove hidden ring nut (21) .
9/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 3013 E...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 20 g00774586
21. Remove ring nut (21) .
Illustration 21 g00774589
22. Remove four socket head screws (22) . Remove valve assembly (23) .
Illustration 22 g00774592
23. Remove two plugs (24) , and the O-ring seals.
10/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 23 g00774593
24. Remove two plugs (25) , and the O-ring seals. Remove spool (26) .
Illustration 24 g00774597
25. Remove four small O-ring seals (27) . Remove two large O-ring seals (28) .
Illustration 25 g00774603
26. Remove plug (29) , and the O-ring seal. Remove spring (30) .
11/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 26 g00774612
27. Remove plug (31) , and the O-ring seal. Remove spool (32) .
Illustration 27 g00774614
28. Remove two plugs (33) , and the O-ring seals. Remove two springs (34) , two washers (35) ,
and spool (36) .
12/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 28 g00774620
29. Remove two plugs (37) and the O-ring seals.
Remove two springs (38) and two pistons (39) .
Illustration 29 g00774631
30. Remove six socket head bolts (40) . Remove cover (41) .
Illustration 30 g00774647
31. Remove port plate (42) .
13/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 31 g00774651
32. Remove bearing (43) , and two O-ring seals (44) .
Illustration 32 g00774655
Note: Turn the housing on one side in order to remove the barrel assembly as a unit.
33. Remove cylinder barrel assembly (45) .
Illustration 33 g00774662
14/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. 34. Remove swashplate (46) .
Illustration 34 g00774665
Note: Mark the location of the pistons in the barrel for assembly purposes.
35. Remove pistons (47) , and retainer plate (48) as a unit from barrel (45) . Remove pistons
(47) from retainer plate (48) .
Illustration 35 g00774680
36. Remove collar (49) . Remove three pins (50) .
15/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 36 g00774674
37. Remove two balls (51) .
Illustration 37 g00774683
38. Remove two pistons (52) , and two springs (53) .
Illustration 38 g00774688
39. Remove shaft assembly (54) .
16/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Illustration 39 g00774692
40. Remove lip seal (55) .
Illustration 40 g00774694
41. Use a suitable press and Tooling (C) in order to remove bearing (56) from shaft (57) .
17/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 41 g00774704
42. Remove housing (58) from housing (59) .
Illustration 42 g00774707
43. Remove duo-cone seal kit (60) .
Illustration 43 g00774717
18/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 44 g00774748
Note: When the plug is removed (131) steel balls will fall from the housing. Place a
receptacle under the housing in order to catch the steel balls.
44. Remove plug (61) . Remove steel balls (62) from the housing.
Illustration 45 g00774755
45. Use Tooling (D) in order to remove bearing assembly (63) .
Illustration 46 g00774760
46. Remove duo-cone seal kit (64) .
19/20303.5 Mini Hydraulic Excavator DCH00001-UP (MACHINE) POWERED BY 301...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...