This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. Key steps include releasing hydraulic pressure, removing pins and bolts to detach components, and installing components in the reverse order while torquing bolts to the specified values. Tools required include retaining ring pliers, seal picks, and molybdenum grease. Safety precautions are provided to relieve hydraulic pressure before disassembly and contain fluids properly.
Caterpillar cat 140 m motor grader (prefix b9g) service repair manual (b9g000...fiksfejjsekkmme
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a Caterpillar 140M motor grader. Key steps include releasing system pressure, disconnecting hydraulic hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Safety precautions are provided to relieve pressure before disassembly and contain fluids properly during maintenance.
Caterpillar cat 160 m motor grader (prefix b9e) service repair manual (b9e000...fusjefjskekem
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 160M Motor Grader. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and pins, and lifting the cylinders off the machine. Reinstallation involves cleaning parts, applying grease, mounting the cylinders with bolts and pins, and reconnecting hoses. Tools and torque specifications are listed to correctly perform the work. Safety precautions are provided to prevent injury from pressurized hydraulic systems.
This document provides instructions for removing the tilt cylinder from a 226 Skid Steer Loader. The key steps are:
1. Release hydraulic pressure and remove quick coupler.
2. Support the rear of the machine with jack stands.
3. Remove snap rings and pins from the front of each lift cylinder.
4. Disconnect lines from each tilt cylinder and remove bolts and pins to separate the cylinder.
Caterpillar cat 277 multi terrain loader (prefix cnc) service repair manual (...ujfjjskekfmmde
This document provides instructions for removing and installing a quick coupler and coupler cylinder on a 277 Multi Terrain Loader. The removal process involves releasing hydraulic pressure, disconnecting hoses and bolts, and lifting the quick coupler off with tools. The installation is the reverse of removal, applying grease before reinstalling and reconnecting all hoses and bolts. Safety precautions are provided to release hydraulic pressure and contain fluids before performing any maintenance.
Caterpillar cat 320 c excavator (prefix jtg) service repair manual (jtg00001 ...ufjjsjekkeidol
The document provides instructions for assembling and disassembling components of a 320C excavator travel motor. The disassembly procedure involves removing 27 individual parts from the travel motor in 28 steps. The assembly procedure instructs assembling the travel motor components in reverse order. Cleanliness is emphasized to prevent contamination of hydraulic components.
Caterpillar cat 320 c excavator (prefix bea) service repair manual (bea00001 ...jjdjfkkskemme
This document provides instructions for removing a bucket cylinder from an excavator. It begins by noting the importance of relieving pressure from hydraulic systems before disassembly to prevent injury. The steps include releasing hydraulic pressure, attaching lifting devices, removing retaining bolts and pins, and disconnecting hoses. Identification marks should be made on all lines and components. Cleanliness is important during disassembly and reassembly to prevent contamination of hydraulic systems.
This document provides instructions for removing and installing a radiator on a Caterpillar 906 Compact Wheel Loader. It describes draining coolant and disconnecting hoses before removing mounting bolts and removing the radiator. Reinstallation follows the removal steps in reverse order. Safety precautions are provided to avoid injury from hot fluids and released pressures.
Caterpillar cat 322 l track excavator (prefix 7wl) service repair manual (7wl...ujjdfjkskdme
This document provides instructions for servicing the final drive sprockets and travel brake valves on a 322-A excavator. It describes how to remove and install the final drive sprockets using lifting tools, cleaning surfaces, applying thread lock and tightening bolts. It also describes releasing hydraulic pressure, removing the travel brake valve cover, disconnecting pipes, removing the valve, cleaning parts, checking seals, and reinstalling the valve. Detailed steps are provided for disassembling and assembling the travel brake valve.
Caterpillar cat 140 m motor grader (prefix b9g) service repair manual (b9g000...fiksfejjsekkmme
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a Caterpillar 140M motor grader. Key steps include releasing system pressure, disconnecting hydraulic hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Safety precautions are provided to relieve pressure before disassembly and contain fluids properly during maintenance.
Caterpillar cat 160 m motor grader (prefix b9e) service repair manual (b9e000...fusjefjskekem
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 160M Motor Grader. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and pins, and lifting the cylinders off the machine. Reinstallation involves cleaning parts, applying grease, mounting the cylinders with bolts and pins, and reconnecting hoses. Tools and torque specifications are listed to correctly perform the work. Safety precautions are provided to prevent injury from pressurized hydraulic systems.
This document provides instructions for removing the tilt cylinder from a 226 Skid Steer Loader. The key steps are:
1. Release hydraulic pressure and remove quick coupler.
2. Support the rear of the machine with jack stands.
3. Remove snap rings and pins from the front of each lift cylinder.
4. Disconnect lines from each tilt cylinder and remove bolts and pins to separate the cylinder.
Caterpillar cat 277 multi terrain loader (prefix cnc) service repair manual (...ujfjjskekfmmde
This document provides instructions for removing and installing a quick coupler and coupler cylinder on a 277 Multi Terrain Loader. The removal process involves releasing hydraulic pressure, disconnecting hoses and bolts, and lifting the quick coupler off with tools. The installation is the reverse of removal, applying grease before reinstalling and reconnecting all hoses and bolts. Safety precautions are provided to release hydraulic pressure and contain fluids before performing any maintenance.
Caterpillar cat 320 c excavator (prefix jtg) service repair manual (jtg00001 ...ufjjsjekkeidol
The document provides instructions for assembling and disassembling components of a 320C excavator travel motor. The disassembly procedure involves removing 27 individual parts from the travel motor in 28 steps. The assembly procedure instructs assembling the travel motor components in reverse order. Cleanliness is emphasized to prevent contamination of hydraulic components.
Caterpillar cat 320 c excavator (prefix bea) service repair manual (bea00001 ...jjdjfkkskemme
This document provides instructions for removing a bucket cylinder from an excavator. It begins by noting the importance of relieving pressure from hydraulic systems before disassembly to prevent injury. The steps include releasing hydraulic pressure, attaching lifting devices, removing retaining bolts and pins, and disconnecting hoses. Identification marks should be made on all lines and components. Cleanliness is important during disassembly and reassembly to prevent contamination of hydraulic systems.
This document provides instructions for removing and installing a radiator on a Caterpillar 906 Compact Wheel Loader. It describes draining coolant and disconnecting hoses before removing mounting bolts and removing the radiator. Reinstallation follows the removal steps in reverse order. Safety precautions are provided to avoid injury from hot fluids and released pressures.
Caterpillar cat 322 l track excavator (prefix 7wl) service repair manual (7wl...ujjdfjkskdme
This document provides instructions for servicing the final drive sprockets and travel brake valves on a 322-A excavator. It describes how to remove and install the final drive sprockets using lifting tools, cleaning surfaces, applying thread lock and tightening bolts. It also describes releasing hydraulic pressure, removing the travel brake valve cover, disconnecting pipes, removing the valve, cleaning parts, checking seals, and reinstalling the valve. Detailed steps are provided for disassembling and assembling the travel brake valve.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual I...f8usejkdmmd8i
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...fjskemmd4r
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual I...f8seodkdmdmed3
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual I...ze6074xunong
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...fujskdiddkmdm3e
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...gen78guozun
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...f8usjejkdmmd
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...ufjskekdjdmw2
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual I...tengtui535
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...jfkksemmdmd
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...xiapokang564341
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. Key steps include:
1. Relieving hydraulic pressure before removal or disassembly.
2. Removing pins, bolts, and tubes to detach the lift cylinder from the lift arm.
3. Using lifting devices to raise and lower the lift arms for removal and installation of pins and tubes.
4. Ensuring proper lubrication and torque specifications are followed during reinstallation.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...hvy7sbkw8e
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. Key steps include:
1. Relieving hydraulic pressure before removal or disassembly.
2. Removing pins, bolts, and tubes to detach the lift cylinder from the lift arm.
3. Using lifting devices to raise and lower the lift arms for removal and installation of pins and tubes.
4. Ensuring proper lubrication and torque specifications are followed during reinstallation.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...wenxian17880
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. Key steps include:
1. Relieving hydraulic pressure before removal or disassembly.
2. Removing pins, bolts, and tubes to detach the lift cylinder from the lift arm.
3. Using lifting slings and a lifting device to raise and lower the lift arms for removal and installation of pins and tubes.
4. Reattaching the lift cylinder and ensuring proper torque on all fasteners before refilling hydraulic fluid. Safety precautions are provided throughout.
Caterpillar cat 140 m motor grader (prefix b9g) service repair manual (b9g000...jfjkskemem
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a Caterpillar 140M motor grader. Key steps include releasing system pressure, disconnecting hydraulic hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Safety precautions are provided to relieve pressure before disassembly and contain fluids properly during maintenance.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual (B9G0000...jfksemmdm3e
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. It describes required tools, safety procedures, and step-by-step instructions for disconnecting hydraulic lines and hoses, removing mounting bolts, and disassembling the cylinders. Cleanliness is emphasized during disassembly and assembly to prevent contamination. Torque specifications and lubrication points are provided.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual (B9G0000...f8isekdodkdmd
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Tools and torque specifications are provided for disassembly and reassembly. Safety precautions are outlined, such as ensuring all pressure is relieved before disassembling cylinders.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual Instant ...jkdkkdsmmd
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Safety precautions are provided to relieve trapped pressure before disassembly and ensure cleanliness of components.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual Instant ...idksmmdmdm
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. It describes required tools, safety procedures, and step-by-step instructions for disassembly and assembly. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and caps, and installing new seals and bearings before reversing the removal process. Proper cleanliness and lubrication are emphasized throughout.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual Instant ...hean57759707
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. It includes safety information and outlines the required tools. The removal process involves releasing system pressure, disconnecting hoses, and removing mounting bolts. The installation is the reverse of removal. Disassembly and cleaning of internal parts is also described.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual (B9G0000...fuskddmmd
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Tools and torque specifications are listed to correctly perform the work. Safety precautions are provided regarding relieving pressure, containing fluids, and preventing contamination.
Doosan mega 160 wheeled loader parts catalogue manualfjjskekfsem
The document provides a parts list and exploded diagram of a cylinder head assembly. It lists over 100 individual part numbers, descriptions, quantities, serial numbers and replacement part information. The cylinder head assembly drawing shows the main components which include the cylinder head, valves, guides, seats, plugs and related mounting hardware.
Doosan e85 compact excavator parts catalogue manualfjjskekfsem
This document contains a parts list and descriptions for a cylinder block assembly. It lists 31 individual parts that make up the cylinder block including the block itself, plugs, bolts, bushes, pins, and other components. It provides the part number, description, quantity, and other identifying information for each part.
More Related Content
Similar to Caterpillar cat 247 multi terrain loader (prefix cml) service repair manual (cml00001 and up)
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual I...f8usejkdmmd8i
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...fjskemmd4r
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual I...f8seodkdmdmed3
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual I...ze6074xunong
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...fujskdiddkmdm3e
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...gen78guozun
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...f8usjejkdmmd
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...ufjskekdjdmw2
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual I...tengtui535
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...jfkksemmdmd
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...xiapokang564341
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. Key steps include:
1. Relieving hydraulic pressure before removal or disassembly.
2. Removing pins, bolts, and tubes to detach the lift cylinder from the lift arm.
3. Using lifting devices to raise and lower the lift arms for removal and installation of pins and tubes.
4. Ensuring proper lubrication and torque specifications are followed during reinstallation.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...hvy7sbkw8e
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. Key steps include:
1. Relieving hydraulic pressure before removal or disassembly.
2. Removing pins, bolts, and tubes to detach the lift cylinder from the lift arm.
3. Using lifting devices to raise and lower the lift arms for removal and installation of pins and tubes.
4. Ensuring proper lubrication and torque specifications are followed during reinstallation.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...wenxian17880
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. Key steps include:
1. Relieving hydraulic pressure before removal or disassembly.
2. Removing pins, bolts, and tubes to detach the lift cylinder from the lift arm.
3. Using lifting slings and a lifting device to raise and lower the lift arms for removal and installation of pins and tubes.
4. Reattaching the lift cylinder and ensuring proper torque on all fasteners before refilling hydraulic fluid. Safety precautions are provided throughout.
Caterpillar cat 140 m motor grader (prefix b9g) service repair manual (b9g000...jfjkskemem
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a Caterpillar 140M motor grader. Key steps include releasing system pressure, disconnecting hydraulic hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Safety precautions are provided to relieve pressure before disassembly and contain fluids properly during maintenance.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual (B9G0000...jfksemmdm3e
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. It describes required tools, safety procedures, and step-by-step instructions for disconnecting hydraulic lines and hoses, removing mounting bolts, and disassembling the cylinders. Cleanliness is emphasized during disassembly and assembly to prevent contamination. Torque specifications and lubrication points are provided.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual (B9G0000...f8isekdodkdmd
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Tools and torque specifications are provided for disassembly and reassembly. Safety precautions are outlined, such as ensuring all pressure is relieved before disassembling cylinders.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual Instant ...jkdkkdsmmd
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Safety precautions are provided to relieve trapped pressure before disassembly and ensure cleanliness of components.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual Instant ...idksmmdmdm
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. It describes required tools, safety procedures, and step-by-step instructions for disassembly and assembly. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and caps, and installing new seals and bearings before reversing the removal process. Proper cleanliness and lubrication are emphasized throughout.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual Instant ...hean57759707
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. It includes safety information and outlines the required tools. The removal process involves releasing system pressure, disconnecting hoses, and removing mounting bolts. The installation is the reverse of removal. Disassembly and cleaning of internal parts is also described.
Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual (B9G0000...fuskddmmd
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 140M Motor Grader. Key steps include releasing system pressure, disconnecting hoses, removing mounting bolts and pins, and lifting the cylinders out of position. Reinstallation involves cleaning parts, applying grease, positioning the cylinders, and reconnecting hoses and mounting hardware. Tools and torque specifications are listed to correctly perform the work. Safety precautions are provided regarding relieving pressure, containing fluids, and preventing contamination.
Similar to Caterpillar cat 247 multi terrain loader (prefix cml) service repair manual (cml00001 and up) (20)
Doosan mega 160 wheeled loader parts catalogue manualfjjskekfsem
The document provides a parts list and exploded diagram of a cylinder head assembly. It lists over 100 individual part numbers, descriptions, quantities, serial numbers and replacement part information. The cylinder head assembly drawing shows the main components which include the cylinder head, valves, guides, seats, plugs and related mounting hardware.
Doosan e85 compact excavator parts catalogue manualfjjskekfsem
This document contains a parts list and descriptions for a cylinder block assembly. It lists 31 individual parts that make up the cylinder block including the block itself, plugs, bolts, bushes, pins, and other components. It provides the part number, description, quantity, and other identifying information for each part.
Doosan e80 compact excavator parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of an engine, including the cylinder block, gear housing, flywheel housing, oil pan, cylinder head, suction manifold, exhaust manifold, camshaft, crankshaft, pistons, and lubrication oil system. It lists part numbers, descriptions, quantities, and other identifying information for over 50 individual parts across 18 figures.
Doosan e63 compact excavator parts catalogue manualfjjskekfsem
This document provides a parts list and descriptions for various components of an engine, including:
- The cylinder block assembly and related plugs and bolts.
- The gear housing, oil pump, seals, bolts, and covers.
- The flywheel housing, oil pan, seals, and bolts.
- The cylinder head, valves, springs, seals, bolts, and related components.
- The intake manifold, sensors, bolts, and throttle body.
- The exhaust manifold, sensors, bolts, pipes, and EGR components.
- The DPF muffler, sensors, case, bolts, pipes, and brackets.
-
Doosan e55 w compact excavator parts catalogue manualfjjskekfsem
This document contains figures and part numbers for various engine components of an E55W engine, including the cylinder block, gear housing, flywheel housing, cylinder head, intake manifold, exhaust manifold, cam shaft, crank shaft, piston, lubrication oil system, and cooling water system. It provides exploded diagrams of the components with corresponding part numbers, descriptions, and quantities for each part.
Doosan dl420 a wheeled loader parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of a diesel engine. It includes lists of parts, part numbers, descriptions and quantities for items like the cylinder block, timing gear case, flywheel housing, driving system, cylinder head, cylinder head cover, and timing system. Serial numbers are provided for some replaceable parts.
Doosan dl200 tc wheeled loader parts catalogue manualfjjskekfsem
This document provides a parts list and diagrams for the cylinder head and related components of a diesel engine. It includes images and lists of parts with descriptions, part numbers, quantities, serial numbers and replacement part information. The list contains over 80 individual part items or assemblies that make up the cylinder head, valves, springs, guides, cover, gaskets and related hardware.
Doosan 460 plus tier 3 skid steer loader parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of a diesel engine, including the cylinder block, gear housing, flywheel housing, cylinder head, intake manifold, exhaust manifold, cam shaft, crank shaft, piston, lubrication oil system, and cooling water system. It provides part numbers, descriptions, quantities, and other identifying information for over 50 individual parts across these various engine systems.
Daewoo doosan solar 500 lc v (500lcv) crawler excavator parts catalogue manualfjjskekfsem
The document provides a parts list for a muffler assembly, listing part numbers, descriptions, and quantities. It details different muffler sub-assembly and muffler part numbers used over different serial number ranges. Replacement part numbers are also provided where applicable.
Daewoo doosan solar 470 lc v crawler excavator parts catalogue manualfjjskekfsem
This document provides a parts list for a main frame assembly. It includes 3 frames, 2 weights, bolts, washers, brackets, and other minor parts. Serial numbers and replacement part numbers are provided for some items. A second similar document then lists parts for an engine mounting assembly, including an engine, radiator, hoses, mounts, brackets, and fasteners.
Daewoo doosan solar 450 lc v crawler excavator parts catalogue manualfjjskekfsem
The document provides a parts list and descriptions for a cylinder block assembly. It lists over 150 individual parts that make up the cylinder block, including the cylinder block itself, bearing caps, bolts, plugs, seals, switches, pipes, flanges, nozzles, brackets, and other miscellaneous parts. It provides the part numbers, descriptions, and quantities for each part.
New holland l228 tier 4 b (final) skid steer loader service repair manual [nf...fjjskekfsem
This document is a service manual for Tier 4B (final) and Stage IV 200 Series Skid Steer Loaders and Compact Track Loaders, including the L221, L228, C227, and C232 models. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety rules regarding ecology and the environment are also included. The manual provides repair and maintenance instructions to be carried out by qualified dealership personnel using the specified tools and procedures.
New holland cr10.90 combine harvesters service repair manualfjjskekfsem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulic systems, electrical systems, attachments and more. The manual provides repair and maintenance information to technicians working on these agricultural machines.
New holland cx6080 tier 3 combine harvester service repair manualfjjskekfsem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and emissions control, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and fault codes. The manual provides technical data, functional descriptions, diagnostics and service procedures for components and systems.
New holland cr9.90 combine harvesters service repair manualfjjskekfsem
This document is a service manual for various combine harvester models from CNH Industrial. It contains an overview of the components covered in the manual, including the engine, transmissions, axles, brakes, hydraulics, steering, tracks, climate control, and electrical systems. The manual is organized by component group and provides part numbers to identify replacement parts.
New holland cx6080 cx6090 tier 4 combine harvester service repair manualfjjskekfsem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and emissions control, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and fault codes. The manual provides technical data, functional descriptions, diagnostics and service procedures for components and systems.
New holland cx7.80 combine harvesters service repair manualfjjskekfsem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections organized by technical system covering the engine, transmission, hydraulics, electrical systems, attachments and more. Safety information is provided at the beginning regarding accident prevention and fluid power system requirements.
New holland cr9090 elevation combine harvesters service repair manualfjjskekfsem
The hydraulic system uses a variable displacement pump to power the work functions and steering. Oil is distributed through the main frame and straw elevator stack valves to cylinders and motors. It returns through filters to the pump and reservoir shared with the hydrostatic system. The pump receives charge pressure from the hydrostatic return oil to operate without a separate charge pump.
New holland c227 stage iv compact track loader service repair manual [ndm4718...fjjskekfsem
This document is a service manual for Tier 4B (final) and Stage IV 200 Series Skid Steer Loaders and Compact Track Loaders, including the L221, L228, C227, and C232 models. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety rules regarding ecology and the environment are also included. The manual provides repair and maintenance instructions to be carried out by qualified dealership personnel using the specified tools and procedures.
Caterpillar cat 903 d compact wheel loader (prefix mzy) service repair manual...fjjskekfsem
This service manual document provides instructions for removing and installing various components on a 903D Compact Wheel Loader, including:
1) The steering frame lock, which must be connected before working on the machine to prevent frame movement.
2) The hydraulic tank, which requires draining fluid and removing numerous hoses, fittings and bolts.
3) The joystick control and mounting, which is removed by disconnecting cables and harnesses after opening cab doors and covers.
4) The steering cylinder, which is removed after relieving pressure and disconnecting hoses by removing pins and clamps.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: MULTI TERRAIN LOADER
Model: 247 MULTI TERRAIN LOADER CML
Configuration: 247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
247 and 257 Multi Terrain Loaders Machine Systems
Media Number -RENR4855-02 Publication Date -01/10/2009 Date Updated -29/10/2009
i01989804
Lift Cylinder - Remove and Install
SMCS - 5102-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1860 Retaining Ring Pliers 1
ZZ
6V-6509 Face Seal Plug (13/16 - 16 THD) 4
6V-9830 Cap As (13/16 - 16 THD) 4
Start By:
A. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN
PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS
SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Cylinders equipped with lock valves can remain pressurized for very
long periods of time, even with the hoses removed.
Failure to relieve pressure before removing a lock valve or
disassembling a cylinder can result in personal injury or death.
1/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Ensure all pressure is relieved before removing a lock valve or
disassembling a cylinder.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube
assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps
to prevent fluid loss, and this helps to keep contaminants from entering the system.
2/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00891203
1. Loosen clamp (5). Disconnect tube assemblies (3) and (4). Remove bolt (2). Remove pin
assembly (1) .
Illustration 2 g00891204
The lift arm brace does not exist on the other side of the machine.
2. Remove pin (6). Lower the lift arm brace (7). Use Tooling (A) to remove retaining ring (8).
Remove pin (9). Remove the lift arm brace (7) .
3/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 3 g00891205
3. Remove cylinder assembly (10) .
4. Repeat Steps 1 through 3 for the other side.
Disassembly and Assembly Information
Table 2
Required Tools
Tool Part Number Part Description Qty
A 127-4904 Repair Stand 1
B 195-4609 Seal Pick 1
C 5P-0960 Molybdenum Grease
Cylinders equipped with lock valves can remain pressurized for very
long periods of time, even with the hoses removed.
Failure to relieve pressure before removing a lock valve or
disassembling a cylinder can result in personal injury or death.
Ensure all pressure is relieved before removing a lock valve or
disassembling a cylinder.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
4/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Illustration 4 g01030496
(1) Torque for the head ... 265 � 15 N�m (195 � 11 lb ft)
(2) Torque for the setscrew ... 22 � 2 N�m (16 � 1 lb ft)
(3) Torque for the nut ... 485 � 15 N�m (358 � 11 lb ft)
Note: Lubricate seals and sealing lips with Tooling (C) before assembly.
Installation Procedure
Table 3
Required Tools
Tool Part Number Part Description Qty
A 1P-1860 Retaining Ring Pliers 1
5/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Illustration 5 g00891205
1. Install cylinder assembly (10) .
6/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 6 g00891204
The lift arm brace does not exist on the other side of the machine.
2. Install the lift arm brace (7). Install pin (9). Use Tooling (A) to install retaining ring (8).
Raise the lift arm brace (7). Install pin (6) .
Illustration 7 g00891294
3. Position spacer (11) to the inside of the machine. Install pin assembly (1) .
7/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 8 g00891203
4. Install bolt (2). Connect tube assemblies (4) and (3). Tighten clamp (5) .
5. Repeat Steps 1 through 4 for the other side.
Note: The lift arm brace does not exist on the other side.
6. Check hydraulic oil level. Refer to Operation and Maintenance Manual, "Hydraulic System
Oil Level - Check".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Nov 10 08:59:56 UTC+0800 2019
8/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: MULTI TERRAIN LOADER
Model: 247 MULTI TERRAIN LOADER CML
Configuration: 247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
247 and 257 Multi Terrain Loaders Machine Systems
Media Number -RENR4855-02 Publication Date -01/10/2009 Date Updated -29/10/2009
i01752020
Lift Arms - Remove and Install
SMCS - 6119-010
Removal Procedure
Start By:
A. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1860 Retaining Ring Pliers 1
B
6V-9510 Face Seal Plug (1 - 14 THD) 4
6V-9831 Cap Assembly (1 - 14 THD) 4
Note: SERVICE DATA: TOOLING (B) WILL NOT BE IDENTIFIED IN
PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS
SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
1/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube
assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps
to prevent fluid loss, and this helps to keep contaminants from entering the system.
Illustration 1 g00891905
1. If equipped, remove cable strap (2) and disconnect harness assembly (1) .
2/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 2 g00891906
2. If equipped, remove bolts (4) and remove bracket (3) with the harness assembly.
Illustration 3 g00897971
The lift arm brace does not exist on the other side.
3. Remove pin (5). Lower lift arm brace (6). Use Tooling (A) to remove retaining ring (7).
Remove pin (8). Remove the lift arm brace (6) .
4. Repeat Step 3 for the other side.
3/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 4 g00908733
5. Use a suitable lifting device, lifting slings, and protective sleeves to raise the lift arms.
Illustration 5 g00897975
6. Loosen bolt (12). Disconnect tube assemblies (11) .
7. Repeat Step 6 for the other side. Lower the lift arms.
Illustration 6 g00908734
4/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 8. Attach lifting slings and protective sleeves to the middle of the lift arms. Remove bolt (10).
Remove the pin assembly (9) .
9. Repeat Step 8 for the other side.
10. Remove lift arms (13). The weight of the lift arms is approximately 314 kg (693 lb).
Installation Procedure
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
5/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 7 g00908734
1. Install lift arms (13). The weight of the lift arms is approximately 314 kg (693 lb).
2. Install pin assembly (9). Install bolt (10). Remove the lifting slings and protective sleeves
from the middle of the lift arms.
3. Repeat Step 2 for the other side. Raise the lift arms.
Illustration 8 g00897975
4. Connect tube assemblies (11). Tighten bolt (12) .
5. Repeat Step 4 for the other side.
6/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 9 g00908733
6. Lower the lift arms. Remove the suitable lifting device, lifting slings, and protective sleeves
from the lift arms.
Illustration 10 g00897971
The lift arm brace does not exist on the other side.
7. Install the lift arm brace (6). Install pin (8). Use Tooling (A) to install retaining ring (7).
Raise lift arm brace (6). Install pin (5) .
8. Repeat Step 7 for the other side.
7/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 11 g00891906
9. If equipped, install bracket (3) with the harness assembly and install bolts (4) .
Illustration 12 g00891905
10. If equipped, connect the harness assembly (1) and install cable strap (2) .
11. Check the hydraulic oil level. Refer to Operation and Maintenance Manual, SEBU7494,
"Hydraulic System Oil Level - Check".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Nov 10 09:00:52 UTC+0800 2019
8/8247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Shutdown SIS
Previous Screen
Product: MULTI TERRAIN LOADER
Model: 247 MULTI TERRAIN LOADER CML
Configuration: 247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
247 and 257 Multi Terrain Loaders Machine Systems
Media Number -RENR4855-02 Publication Date -01/10/2009 Date Updated -29/10/2009
i01755726
Pilot Operated Hydraulic Control - Remove
SMCS - 5059-011; 5705-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
6V-9507 Face Seal Plug (9/16 - 18 THD) 12
6V-9828 Cap As (9/16 - 18 THD) 12
Start By:
A. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
B. Raise the cab. Refer to Disassembly and Assembly, "Cab - Tilt".
Note: SERVICE DATA: TOOLING (A) WILL NOT BE IDENTIFIED IN
PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS
SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
1/5247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube
assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps
to prevent fluid loss, and this helps to keep contaminants from entering the system.
Illustration 1 g00898322
1. Remove four screws (1). Remove cover (2) .
2/5247 257 Multi Terrain Loader CML00001-UP (MACHINE) POWERED BY 3034 Eng...
2019/11/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...