SlideShare a Scribd company logo
Service Repair Manual
Models
140M Motor Grader
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140M MOTOR GRADER B9G
Configuration: 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
140M Motor Grader
Media Number -KENR6424-07 Publication Date -01/04/2015 Date Updated -06/04/2015
i02837848
Blade Lift Cylinder - Remove and Install
SMCS - 5102-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Cap 1
Cylinders equipped with lock valves can remain pressurized for very
long periods of time, even with the hoses removed.
Failure to relieve pressure before removing a lock valve or
disassembling a cylinder can result in personal injury or death.
Ensure all pressure is relieved before removing a lock valve or
disassembling a cylinder.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Refer to Special Publication, PERJ1017, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Hydraulic oil pressure can remain in the hydraulic system on this
machine after the engine and pump have been stopped. Serious injury
can result if this pressure is not released before any service is done on
the hydraulic systems. In order to prevent possible injury, release the
hydraulic system pressure before working on any fitting, hose, or
hydraulic component.
Lower all attachments to the ground before service is started. If the
hydraulic system must be serviced, tested, or adjusted with the
attachment in the raised position, the attachments and lift cylinders
must be supported properly.
Always move the machine to a location away from the travel of other
machines. Be sure that other personnel are not near the machine when
the engine is running and tests or adjustments are being made.
1. Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure -
Release".
Illustration 1 g01397769
2. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply
138 kPa (20 psi). This procedure will pull a vacuum on the hydraulic system.
2/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g01415039
3. Disconnect hose assemblies (1). Remove clamp (2).
Illustration 3 g01415042
4. Remove bolts (6) and remove cap (7).
3/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Note: Note the shims and inserts for installation purposes.
5. Attach a suitable lifting device to blade lift cylinder (5). The weight of blade lift cylinder (5) is
approximately 59 kg (130 lb).
6. Remove bolts (3) and remove blade lift cylinder (5).
7. Remove cap assemblies (4) from blade lift cylinder (5).
Illustration 4 g01415199
8. Remove seal (8) from cap assembly (4). Remove bearing (9) from cap assembly (4).
9. Repeat Step 8 for the remaining cap assembly.
Disassembly and Assembly Information
Table 2
Required Tools
Tool Part Number Part Description Qty
B 127-4904 Repair Stand 1
C 195-4609 Seal Pick 1
D 7M-7456 Bearing Mount Compound 1
E 1P-0808 Multipurpose Grease 1
F
9U-7868 Spanner Wrench 1
127-8064 Adjustable Plate 1
Cylinders equipped with lock valves can remain pressurized for very
long periods of time, even with the hoses removed.
Failure to relieve pressure before removing a lock valve or
disassembling a cylinder can result in personal injury or death.
4/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Ensure all pressure is relieved before removing a lock valve or
disassembling a cylinder.
Illustration 5 g00931771
(1) Use a 46 mm socket in order to remove the bolt. Tighten the bolt to a torque of 1800 ± 200 N·m
(1328 ± 148 lb ft).
(2) Lubricate sealing lips with a thin covering of the lubricant that is being sealed.
(3) Apply Tooling (D) to the seal groove prior to assembling the wiper seal.
(4) Torque for head ... 600 ± 130 N·m (440 ± 95 lb ft)
Note: Lubricate the threads with Tooling (E).
Installation Procedure
Table 3
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Cap 1
5/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
G 183-3424 Grease Cartridge 1
H 1P-0510 Driver Gp 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in
cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint
may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn
or damaged, use new parts for replacement.
Illustration 6 g01415199
1. Use Tooling (H) (not shown) and a suitable press in order to install bearing (9) in cap assembly
(4). Use Tooling (H) (not shown) in order to install seal (8) in cap assembly (4).
2. Repeat Step 1 for the remaining cap assembly.
Illustration 7 g01415042
6/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 8 g01415219
3. Install caps (4) on blade lift cylinder (5).
4. Attach a suitable lifting device to blade lift cylinder (5). The weight of blade lift cylinder (5) is
approximately 59 kg (130 lb).
5. Position blade lift cylinder (5) on the machine. Install bolts (3). Torque bolts (3) to
115 ± 7 N·m (85 ± 5 lb ft).
6. Apply Tooling (G) between inserts (11) and ballstuds (12). Install cap (7) and install bolts (6).
Note: As required, use shims (10) in order to allow the socket to move freely around ballstud
(12). Assemble the same quantity of shims (10) on both sides of ballstud (12).
7/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 9 g01415039
7. Install clamp (2). Connect hose assemblies (1).
Illustration 10 g01397769
8. Remove Tooling (A).
9. Check the hydraulic oil level. Refer to Operation and Maintenance Manual, "Hydraulic System
Oil Level - Check" for the correct procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jan 16 12:40:20 UTC+0800 2020
8/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140M MOTOR GRADER B9G
Configuration: 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
140M Motor Grader
Media Number -KENR6424-07 Publication Date -01/04/2015 Date Updated -06/04/2015
i02798701
Sideshift Cylinder - Remove and Install
SMCS - 5804-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Cap 1
Start By:
a. Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock -
Separate and Connect".
Cylinders equipped with lock valves can remain pressurized for very
long periods of time, even with the hoses removed.
Failure to relieve pressure before removing a lock valve or
disassembling a cylinder can result in personal injury or death.
Ensure all pressure is relieved before removing a lock valve or
disassembling a cylinder.
NOTICE
Keep all parts clean from contaminants.
1/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, PERJ1017, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation
purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep
contaminants from entering the system.
2/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g01398678
1. Extend side shift cylinder (2) to the left. Move the blade to the forward position.
2. Remove cotter pin (3) (not shown) in order to remove pin (1). Remove bolts (4) in order to
remove bracket (5).
3. Retract side shift cylinder (2).
4. Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure -
Release".
Illustration 2 g01397769
5. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply
138 kPa (20 psi). This procedure will pull a vacuum on the hydraulic system.
3/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3 g01398701
6. Disconnect hose assemblies (6).
Illustration 4 g01398731
7. Remove cotter pin (7). Remove pin (8) and washers (9).
Note: Note the number and the location of washers (9) for assembly purposes.
Illustration 5 g01398735
8. Attach a suitable lifting device to sideshift cylinder (2). The weight of sideshift cylinder (2) is
approximately 91 kg (200 lb). Slide sideshift cylinder (2) to the left and remove sideshift
cylinder (2).
Disassembly and Assembly Information
Table 2
Required Tools
Tool Part Number Part Description Qty
B 127-4904 Hydraulic Cylinder Repair Stand Gp 1
C 195-4609 Seal Pick 1
D 9U-7868 Spanner Wrench 1
4/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
127-8064 Adapter Plate Gp 1
E 4C-4032 Bearing Mount Compound 1
F 9U-6539 Socket 1
G 1P-0808 Multipurpose Grease 1
Cylinders equipped with lock valves can remain pressurized for very
long periods of time, even with the hoses removed.
Failure to relieve pressure before removing a lock valve or
disassembling a cylinder can result in personal injury or death.
Ensure all pressure is relieved before removing a lock valve or
disassembling a cylinder.
Illustration 6 g01012935
(1) Use Tooling (F) in order to torque the bolt. Tighten the bolt to a torque of 900 ± 100 N·m
(660 ± 75 lb ft).
(2) Lubricate sealing lips with a thin covering of the lubricant that is being sealed.
(3) Apply Tooling (E) to the wiper seal groove before you assemble the wiper seal to the head.
Note: Lubricate the threads with clean grease and torque head (4) to 600 ± 130 N·m (440 ± 95 lb ft).
Use Tooling (G) to apply the grease.
Installation Procedure
5/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Table 3
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Cap 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 7 g01398735
1. Use a suitable lifting device in order to install sideshift cylinder (2). The weight of sideshift
cylinder (2) is approximately 91 kg (200 lb).
Illustration 8 g01398731
2. Position washers (9) and install pin (8). Install cotter pin (7).
6/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 9 g01398701
3. Connect hose assemblies (6).
Illustration 10 g01398678
4. Extend side shift cylinder (2) to the left.
5. Position bracket (5). Align side shift cylinder (2) and install pin (1). Install cotter pin (3) (not
shown).
Illustration 11 g01397769
6. Remove Tooling (A).
7/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Check the hydraulic oil level. Refer to Operation and Maintenance Manual, "Hydraulic System
Oil Level - Check".
End By:
a. Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock -
Separate and Connect".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jan 16 12:41:15 UTC+0800 2020
8/8
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140M MOTOR GRADER B9G
Configuration: 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
140M Motor Grader
Media Number -KENR6424-07 Publication Date -01/04/2015 Date Updated -06/04/2015
i02797651
Centershift Cylinder - Remove and Install
SMCS - 5223-010
Removal Procedure
Start By:
a. Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock -
Separate and Connect".
Cylinders equipped with lock valves can remain pressurized for very
long periods of time, even with the hoses removed.
Failure to relieve pressure before removing a lock valve or
disassembling a cylinder can result in personal injury or death.
Ensure all pressure is relieved before removing a lock valve or
disassembling a cylinder.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/9
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
Refer to Special Publication, PERJ1017, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Hydraulic oil pressure can remain in the hydraulic system on this
machine after the engine and pump have been stopped. Serious injury
can result if this pressure is not released before any service is done on
the hydraulic systems. In order to prevent possible injury, release the
hydraulic system pressure before working on any fitting, hose, or
hydraulic component.
Lower all attachments to the ground before service is started. If the
hydraulic system must be serviced, tested, or adjusted with the
attachment in the raised position, the attachments and lift cylinders
must be supported properly.
Always move the machine to a location away from the travel of other
machines. Be sure that other personnel are not near the machine when
the engine is running and tests or adjustments are being made.
1. Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure -
Release".
2/9
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ...
2020/1/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

More Related Content

More from jkdkkdsmmd

Caterpillar Cat 329DL EXCAVATOR (Prefix JHJ) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix JHJ) Service Repair Manual Instant Do...Caterpillar Cat 329DL EXCAVATOR (Prefix JHJ) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix JHJ) Service Repair Manual Instant Do...
jkdkkdsmmd
 
Caterpillar Cat 329DL EXCAVATOR (Prefix DJF) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix DJF) Service Repair Manual Instant Do...Caterpillar Cat 329DL EXCAVATOR (Prefix DJF) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix DJF) Service Repair Manual Instant Do...
jkdkkdsmmd
 
Caterpillar Cat 329D2L Excavator (Prefix THW) Service Repair Manual Instant D...
Caterpillar Cat 329D2L Excavator (Prefix THW) Service Repair Manual Instant D...Caterpillar Cat 329D2L Excavator (Prefix THW) Service Repair Manual Instant D...
Caterpillar Cat 329D2L Excavator (Prefix THW) Service Repair Manual Instant D...
jkdkkdsmmd
 
Caterpillar Cat 428 SERIES II BACKHOE LOADER (Prefix 6TC) Service Repair Manu...
Caterpillar Cat 428 SERIES II BACKHOE LOADER (Prefix 6TC) Service Repair Manu...Caterpillar Cat 428 SERIES II BACKHOE LOADER (Prefix 6TC) Service Repair Manu...
Caterpillar Cat 428 SERIES II BACKHOE LOADER (Prefix 6TC) Service Repair Manu...
jkdkkdsmmd
 
Caterpillar Cat 329DL Excavator (Prefix TPM) Service Repair Manual Instant Do...
Caterpillar Cat 329DL Excavator (Prefix TPM) Service Repair Manual Instant Do...Caterpillar Cat 329DL Excavator (Prefix TPM) Service Repair Manual Instant Do...
Caterpillar Cat 329DL Excavator (Prefix TPM) Service Repair Manual Instant Do...
jkdkkdsmmd
 
Caterpillar Cat 329DL EXCAVATOR (Prefix WLT) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix WLT) Service Repair Manual Instant Do...Caterpillar Cat 329DL EXCAVATOR (Prefix WLT) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix WLT) Service Repair Manual Instant Do...
jkdkkdsmmd
 
Caterpillar Cat 329DL Excavator (Prefix TZL) Service Repair Manual Instant Do...
Caterpillar Cat 329DL Excavator (Prefix TZL) Service Repair Manual Instant Do...Caterpillar Cat 329DL Excavator (Prefix TZL) Service Repair Manual Instant Do...
Caterpillar Cat 329DL Excavator (Prefix TZL) Service Repair Manual Instant Do...
jkdkkdsmmd
 
Caterpillar Cat 329DL EXCAVATOR (Prefix MNB) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix MNB) Service Repair Manual Instant Do...Caterpillar Cat 329DL EXCAVATOR (Prefix MNB) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix MNB) Service Repair Manual Instant Do...
jkdkkdsmmd
 
Caterpillar Cat 329D2L Excavator (Prefix RGA) Service Repair Manual Instant D...
Caterpillar Cat 329D2L Excavator (Prefix RGA) Service Repair Manual Instant D...Caterpillar Cat 329D2L Excavator (Prefix RGA) Service Repair Manual Instant D...
Caterpillar Cat 329D2L Excavator (Prefix RGA) Service Repair Manual Instant D...
jkdkkdsmmd
 
Caterpillar Cat 329D2 Excavator (Prefix RGA) Service Repair Manual Instant Do...
Caterpillar Cat 329D2 Excavator (Prefix RGA) Service Repair Manual Instant Do...Caterpillar Cat 329D2 Excavator (Prefix RGA) Service Repair Manual Instant Do...
Caterpillar Cat 329D2 Excavator (Prefix RGA) Service Repair Manual Instant Do...
jkdkkdsmmd
 
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...
jkdkkdsmmd
 
Caterpillar Cat 329D2 Excavator (Prefix THW) Service Repair Manual Instant Do...
Caterpillar Cat 329D2 Excavator (Prefix THW) Service Repair Manual Instant Do...Caterpillar Cat 329D2 Excavator (Prefix THW) Service Repair Manual Instant Do...
Caterpillar Cat 329D2 Excavator (Prefix THW) Service Repair Manual Instant Do...
jkdkkdsmmd
 
Caterpillar Cat 329D L Excavator (Prefix BFC) Service Repair Manual Instant D...
Caterpillar Cat 329D L Excavator (Prefix BFC) Service Repair Manual Instant D...Caterpillar Cat 329D L Excavator (Prefix BFC) Service Repair Manual Instant D...
Caterpillar Cat 329D L Excavator (Prefix BFC) Service Repair Manual Instant D...
jkdkkdsmmd
 
Caterpillar Cat 320D2L Excavator (Prefix HDM) Service Repair Manual Instant D...
Caterpillar Cat 320D2L Excavator (Prefix HDM) Service Repair Manual Instant D...Caterpillar Cat 320D2L Excavator (Prefix HDM) Service Repair Manual Instant D...
Caterpillar Cat 320D2L Excavator (Prefix HDM) Service Repair Manual Instant D...
jkdkkdsmmd
 
Caterpillar Cat 322L EXCAVATOR (Prefix 8CL) Service Repair Manual Instant Dow...
Caterpillar Cat 322L EXCAVATOR (Prefix 8CL) Service Repair Manual Instant Dow...Caterpillar Cat 322L EXCAVATOR (Prefix 8CL) Service Repair Manual Instant Dow...
Caterpillar Cat 322L EXCAVATOR (Prefix 8CL) Service Repair Manual Instant Dow...
jkdkkdsmmd
 
Caterpillar Cat 320N EXCAVATOR (Prefix 4ZJ) Service Repair Manual Instant Dow...
Caterpillar Cat 320N EXCAVATOR (Prefix 4ZJ) Service Repair Manual Instant Dow...Caterpillar Cat 320N EXCAVATOR (Prefix 4ZJ) Service Repair Manual Instant Dow...
Caterpillar Cat 320N EXCAVATOR (Prefix 4ZJ) Service Repair Manual Instant Dow...
jkdkkdsmmd
 
Caterpillar Cat 320D2 L Excavator (Prefix YEA) Service Repair Manual Instant ...
Caterpillar Cat 320D2 L Excavator (Prefix YEA) Service Repair Manual Instant ...Caterpillar Cat 320D2 L Excavator (Prefix YEA) Service Repair Manual Instant ...
Caterpillar Cat 320D2 L Excavator (Prefix YEA) Service Repair Manual Instant ...
jkdkkdsmmd
 
Caterpillar Cat 320D2 L Excavator (Prefix RAR) Service Repair Manual Instant ...
Caterpillar Cat 320D2 L Excavator (Prefix RAR) Service Repair Manual Instant ...Caterpillar Cat 320D2 L Excavator (Prefix RAR) Service Repair Manual Instant ...
Caterpillar Cat 320D2 L Excavator (Prefix RAR) Service Repair Manual Instant ...
jkdkkdsmmd
 
Caterpillar Cat 320D2 Excavator (Prefix YEA) Service Repair Manual Instant Do...
Caterpillar Cat 320D2 Excavator (Prefix YEA) Service Repair Manual Instant Do...Caterpillar Cat 320D2 Excavator (Prefix YEA) Service Repair Manual Instant Do...
Caterpillar Cat 320D2 Excavator (Prefix YEA) Service Repair Manual Instant Do...
jkdkkdsmmd
 
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual Instant Do...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual Instant Do...Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual Instant Do...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual Instant Do...
jkdkkdsmmd
 

More from jkdkkdsmmd (20)

Caterpillar Cat 329DL EXCAVATOR (Prefix JHJ) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix JHJ) Service Repair Manual Instant Do...Caterpillar Cat 329DL EXCAVATOR (Prefix JHJ) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix JHJ) Service Repair Manual Instant Do...
 
Caterpillar Cat 329DL EXCAVATOR (Prefix DJF) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix DJF) Service Repair Manual Instant Do...Caterpillar Cat 329DL EXCAVATOR (Prefix DJF) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix DJF) Service Repair Manual Instant Do...
 
Caterpillar Cat 329D2L Excavator (Prefix THW) Service Repair Manual Instant D...
Caterpillar Cat 329D2L Excavator (Prefix THW) Service Repair Manual Instant D...Caterpillar Cat 329D2L Excavator (Prefix THW) Service Repair Manual Instant D...
Caterpillar Cat 329D2L Excavator (Prefix THW) Service Repair Manual Instant D...
 
Caterpillar Cat 428 SERIES II BACKHOE LOADER (Prefix 6TC) Service Repair Manu...
Caterpillar Cat 428 SERIES II BACKHOE LOADER (Prefix 6TC) Service Repair Manu...Caterpillar Cat 428 SERIES II BACKHOE LOADER (Prefix 6TC) Service Repair Manu...
Caterpillar Cat 428 SERIES II BACKHOE LOADER (Prefix 6TC) Service Repair Manu...
 
Caterpillar Cat 329DL Excavator (Prefix TPM) Service Repair Manual Instant Do...
Caterpillar Cat 329DL Excavator (Prefix TPM) Service Repair Manual Instant Do...Caterpillar Cat 329DL Excavator (Prefix TPM) Service Repair Manual Instant Do...
Caterpillar Cat 329DL Excavator (Prefix TPM) Service Repair Manual Instant Do...
 
Caterpillar Cat 329DL EXCAVATOR (Prefix WLT) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix WLT) Service Repair Manual Instant Do...Caterpillar Cat 329DL EXCAVATOR (Prefix WLT) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix WLT) Service Repair Manual Instant Do...
 
Caterpillar Cat 329DL Excavator (Prefix TZL) Service Repair Manual Instant Do...
Caterpillar Cat 329DL Excavator (Prefix TZL) Service Repair Manual Instant Do...Caterpillar Cat 329DL Excavator (Prefix TZL) Service Repair Manual Instant Do...
Caterpillar Cat 329DL Excavator (Prefix TZL) Service Repair Manual Instant Do...
 
Caterpillar Cat 329DL EXCAVATOR (Prefix MNB) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix MNB) Service Repair Manual Instant Do...Caterpillar Cat 329DL EXCAVATOR (Prefix MNB) Service Repair Manual Instant Do...
Caterpillar Cat 329DL EXCAVATOR (Prefix MNB) Service Repair Manual Instant Do...
 
Caterpillar Cat 329D2L Excavator (Prefix RGA) Service Repair Manual Instant D...
Caterpillar Cat 329D2L Excavator (Prefix RGA) Service Repair Manual Instant D...Caterpillar Cat 329D2L Excavator (Prefix RGA) Service Repair Manual Instant D...
Caterpillar Cat 329D2L Excavator (Prefix RGA) Service Repair Manual Instant D...
 
Caterpillar Cat 329D2 Excavator (Prefix RGA) Service Repair Manual Instant Do...
Caterpillar Cat 329D2 Excavator (Prefix RGA) Service Repair Manual Instant Do...Caterpillar Cat 329D2 Excavator (Prefix RGA) Service Repair Manual Instant Do...
Caterpillar Cat 329D2 Excavator (Prefix RGA) Service Repair Manual Instant Do...
 
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...
 
Caterpillar Cat 329D2 Excavator (Prefix THW) Service Repair Manual Instant Do...
Caterpillar Cat 329D2 Excavator (Prefix THW) Service Repair Manual Instant Do...Caterpillar Cat 329D2 Excavator (Prefix THW) Service Repair Manual Instant Do...
Caterpillar Cat 329D2 Excavator (Prefix THW) Service Repair Manual Instant Do...
 
Caterpillar Cat 329D L Excavator (Prefix BFC) Service Repair Manual Instant D...
Caterpillar Cat 329D L Excavator (Prefix BFC) Service Repair Manual Instant D...Caterpillar Cat 329D L Excavator (Prefix BFC) Service Repair Manual Instant D...
Caterpillar Cat 329D L Excavator (Prefix BFC) Service Repair Manual Instant D...
 
Caterpillar Cat 320D2L Excavator (Prefix HDM) Service Repair Manual Instant D...
Caterpillar Cat 320D2L Excavator (Prefix HDM) Service Repair Manual Instant D...Caterpillar Cat 320D2L Excavator (Prefix HDM) Service Repair Manual Instant D...
Caterpillar Cat 320D2L Excavator (Prefix HDM) Service Repair Manual Instant D...
 
Caterpillar Cat 322L EXCAVATOR (Prefix 8CL) Service Repair Manual Instant Dow...
Caterpillar Cat 322L EXCAVATOR (Prefix 8CL) Service Repair Manual Instant Dow...Caterpillar Cat 322L EXCAVATOR (Prefix 8CL) Service Repair Manual Instant Dow...
Caterpillar Cat 322L EXCAVATOR (Prefix 8CL) Service Repair Manual Instant Dow...
 
Caterpillar Cat 320N EXCAVATOR (Prefix 4ZJ) Service Repair Manual Instant Dow...
Caterpillar Cat 320N EXCAVATOR (Prefix 4ZJ) Service Repair Manual Instant Dow...Caterpillar Cat 320N EXCAVATOR (Prefix 4ZJ) Service Repair Manual Instant Dow...
Caterpillar Cat 320N EXCAVATOR (Prefix 4ZJ) Service Repair Manual Instant Dow...
 
Caterpillar Cat 320D2 L Excavator (Prefix YEA) Service Repair Manual Instant ...
Caterpillar Cat 320D2 L Excavator (Prefix YEA) Service Repair Manual Instant ...Caterpillar Cat 320D2 L Excavator (Prefix YEA) Service Repair Manual Instant ...
Caterpillar Cat 320D2 L Excavator (Prefix YEA) Service Repair Manual Instant ...
 
Caterpillar Cat 320D2 L Excavator (Prefix RAR) Service Repair Manual Instant ...
Caterpillar Cat 320D2 L Excavator (Prefix RAR) Service Repair Manual Instant ...Caterpillar Cat 320D2 L Excavator (Prefix RAR) Service Repair Manual Instant ...
Caterpillar Cat 320D2 L Excavator (Prefix RAR) Service Repair Manual Instant ...
 
Caterpillar Cat 320D2 Excavator (Prefix YEA) Service Repair Manual Instant Do...
Caterpillar Cat 320D2 Excavator (Prefix YEA) Service Repair Manual Instant Do...Caterpillar Cat 320D2 Excavator (Prefix YEA) Service Repair Manual Instant Do...
Caterpillar Cat 320D2 Excavator (Prefix YEA) Service Repair Manual Instant Do...
 
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual Instant Do...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual Instant Do...Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual Instant Do...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual Instant Do...
 

Recently uploaded

Antique Plastic Traders Company Profile
Antique Plastic Traders Company ProfileAntique Plastic Traders Company Profile
Antique Plastic Traders Company Profile
Antique Plastic Traders
 
Why Is Your BMW X3 Hood Not Responding To Release Commands
Why Is Your BMW X3 Hood Not Responding To Release CommandsWhy Is Your BMW X3 Hood Not Responding To Release Commands
Why Is Your BMW X3 Hood Not Responding To Release Commands
Dart Auto
 
Regeneration of Diesel Particulate Filter in Automobile
Regeneration of Diesel Particulate Filter in AutomobileRegeneration of Diesel Particulate Filter in Automobile
Regeneration of Diesel Particulate Filter in Automobile
AtanuGhosh62
 
TRANSFORMER OIL classifications and specifications
TRANSFORMER OIL classifications and specificationsTRANSFORMER OIL classifications and specifications
TRANSFORMER OIL classifications and specifications
vishnup11
 
What Could Cause The Headlights On Your Porsche 911 To Stop Working
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingWhat Could Cause The Headlights On Your Porsche 911 To Stop Working
What Could Cause The Headlights On Your Porsche 911 To Stop Working
Lancer Service
 
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...
Autohaus Service and Sales
 
Wondering if Your Mercedes EIS is at Fault Here’s How to Tell
Wondering if Your Mercedes EIS is at Fault Here’s How to TellWondering if Your Mercedes EIS is at Fault Here’s How to Tell
Wondering if Your Mercedes EIS is at Fault Here’s How to Tell
Vic Auto Collision & Repair
 
One compartment Model Deliverdddddded.pdf
One compartment Model Deliverdddddded.pdfOne compartment Model Deliverdddddded.pdf
One compartment Model Deliverdddddded.pdf
RehanRustam2
 
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
Fifth Gear Automotive Argyle
 
Digital Fleet Management - Why Your Business Need It?
Digital Fleet Management - Why Your Business Need It?Digital Fleet Management - Why Your Business Need It?
Digital Fleet Management - Why Your Business Need It?
jennifermiller8137
 
Empowering Limpopo Entrepreneurs Consulting SMEs.pptx
Empowering Limpopo Entrepreneurs  Consulting SMEs.pptxEmpowering Limpopo Entrepreneurs  Consulting SMEs.pptx
Empowering Limpopo Entrepreneurs Consulting SMEs.pptx
Precious Mvulane CA (SA),RA
 
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
ahmedendrise81
 
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
Import Motorworks
 
PARTS MANUAL tackeuschi TL150 BT7Z011-2.pdf
PARTS MANUAL tackeuschi TL150 BT7Z011-2.pdfPARTS MANUAL tackeuschi TL150 BT7Z011-2.pdf
PARTS MANUAL tackeuschi TL150 BT7Z011-2.pdf
eduarddorda1010
 
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.docBài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
daothibichhang1
 
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out HereWhy Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
Masters European & Gapanese Auto Repair
 
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
Fifth Gear Automotive Cross Roads
 
Things to remember while upgrading the brakes of your car
Things to remember while upgrading the brakes of your carThings to remember while upgrading the brakes of your car
Things to remember while upgrading the brakes of your car
jennifermiller8137
 
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
eygkup
 
Skoda Octavia Rs for Sale Perth | Skoda Perth
Skoda Octavia Rs for Sale Perth | Skoda PerthSkoda Octavia Rs for Sale Perth | Skoda Perth
Skoda Octavia Rs for Sale Perth | Skoda Perth
Perth City Skoda
 

Recently uploaded (20)

Antique Plastic Traders Company Profile
Antique Plastic Traders Company ProfileAntique Plastic Traders Company Profile
Antique Plastic Traders Company Profile
 
Why Is Your BMW X3 Hood Not Responding To Release Commands
Why Is Your BMW X3 Hood Not Responding To Release CommandsWhy Is Your BMW X3 Hood Not Responding To Release Commands
Why Is Your BMW X3 Hood Not Responding To Release Commands
 
Regeneration of Diesel Particulate Filter in Automobile
Regeneration of Diesel Particulate Filter in AutomobileRegeneration of Diesel Particulate Filter in Automobile
Regeneration of Diesel Particulate Filter in Automobile
 
TRANSFORMER OIL classifications and specifications
TRANSFORMER OIL classifications and specificationsTRANSFORMER OIL classifications and specifications
TRANSFORMER OIL classifications and specifications
 
What Could Cause The Headlights On Your Porsche 911 To Stop Working
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingWhat Could Cause The Headlights On Your Porsche 911 To Stop Working
What Could Cause The Headlights On Your Porsche 911 To Stop Working
 
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...
 
Wondering if Your Mercedes EIS is at Fault Here’s How to Tell
Wondering if Your Mercedes EIS is at Fault Here’s How to TellWondering if Your Mercedes EIS is at Fault Here’s How to Tell
Wondering if Your Mercedes EIS is at Fault Here’s How to Tell
 
One compartment Model Deliverdddddded.pdf
One compartment Model Deliverdddddded.pdfOne compartment Model Deliverdddddded.pdf
One compartment Model Deliverdddddded.pdf
 
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
 
Digital Fleet Management - Why Your Business Need It?
Digital Fleet Management - Why Your Business Need It?Digital Fleet Management - Why Your Business Need It?
Digital Fleet Management - Why Your Business Need It?
 
Empowering Limpopo Entrepreneurs Consulting SMEs.pptx
Empowering Limpopo Entrepreneurs  Consulting SMEs.pptxEmpowering Limpopo Entrepreneurs  Consulting SMEs.pptx
Empowering Limpopo Entrepreneurs Consulting SMEs.pptx
 
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
 
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
 
PARTS MANUAL tackeuschi TL150 BT7Z011-2.pdf
PARTS MANUAL tackeuschi TL150 BT7Z011-2.pdfPARTS MANUAL tackeuschi TL150 BT7Z011-2.pdf
PARTS MANUAL tackeuschi TL150 BT7Z011-2.pdf
 
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.docBài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
 
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out HereWhy Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
 
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
 
Things to remember while upgrading the brakes of your car
Things to remember while upgrading the brakes of your carThings to remember while upgrading the brakes of your car
Things to remember while upgrading the brakes of your car
 
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
 
Skoda Octavia Rs for Sale Perth | Skoda Perth
Skoda Octavia Rs for Sale Perth | Skoda PerthSkoda Octavia Rs for Sale Perth | Skoda Perth
Skoda Octavia Rs for Sale Perth | Skoda Perth
 

Caterpillar Cat 140M MOTOR GRADER (Prefix B9G) Service Repair Manual Instant Download.pdf

  • 2. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 140M MOTOR GRADER B9G Configuration: 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 140M Motor Grader Media Number -KENR6424-07 Publication Date -01/04/2015 Date Updated -06/04/2015 i02837848 Blade Lift Cylinder - Remove and Install SMCS - 5102-010 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 311-1362 Vacuum Cap 1 Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed. Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death. Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. 1/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 3. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. Hydraulic oil pressure can remain in the hydraulic system on this machine after the engine and pump have been stopped. Serious injury can result if this pressure is not released before any service is done on the hydraulic systems. In order to prevent possible injury, release the hydraulic system pressure before working on any fitting, hose, or hydraulic component. Lower all attachments to the ground before service is started. If the hydraulic system must be serviced, tested, or adjusted with the attachment in the raised position, the attachments and lift cylinders must be supported properly. Always move the machine to a location away from the travel of other machines. Be sure that other personnel are not near the machine when the engine is running and tests or adjustments are being made. 1. Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure - Release". Illustration 1 g01397769 2. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 138 kPa (20 psi). This procedure will pull a vacuum on the hydraulic system. 2/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 4. Illustration 2 g01415039 3. Disconnect hose assemblies (1). Remove clamp (2). Illustration 3 g01415042 4. Remove bolts (6) and remove cap (7). 3/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 5. Note: Note the shims and inserts for installation purposes. 5. Attach a suitable lifting device to blade lift cylinder (5). The weight of blade lift cylinder (5) is approximately 59 kg (130 lb). 6. Remove bolts (3) and remove blade lift cylinder (5). 7. Remove cap assemblies (4) from blade lift cylinder (5). Illustration 4 g01415199 8. Remove seal (8) from cap assembly (4). Remove bearing (9) from cap assembly (4). 9. Repeat Step 8 for the remaining cap assembly. Disassembly and Assembly Information Table 2 Required Tools Tool Part Number Part Description Qty B 127-4904 Repair Stand 1 C 195-4609 Seal Pick 1 D 7M-7456 Bearing Mount Compound 1 E 1P-0808 Multipurpose Grease 1 F 9U-7868 Spanner Wrench 1 127-8064 Adjustable Plate 1 Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed. Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death. 4/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 6. Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder. Illustration 5 g00931771 (1) Use a 46 mm socket in order to remove the bolt. Tighten the bolt to a torque of 1800 ± 200 N·m (1328 ± 148 lb ft). (2) Lubricate sealing lips with a thin covering of the lubricant that is being sealed. (3) Apply Tooling (D) to the seal groove prior to assembling the wiper seal. (4) Torque for head ... 600 ± 130 N·m (440 ± 95 lb ft) Note: Lubricate the threads with Tooling (E). Installation Procedure Table 3 Required Tools Tool Part Number Part Description Qty A 311-1362 Vacuum Cap 1 5/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 7. G 183-3424 Grease Cartridge 1 H 1P-0510 Driver Gp 1 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Illustration 6 g01415199 1. Use Tooling (H) (not shown) and a suitable press in order to install bearing (9) in cap assembly (4). Use Tooling (H) (not shown) in order to install seal (8) in cap assembly (4). 2. Repeat Step 1 for the remaining cap assembly. Illustration 7 g01415042 6/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 8. Illustration 8 g01415219 3. Install caps (4) on blade lift cylinder (5). 4. Attach a suitable lifting device to blade lift cylinder (5). The weight of blade lift cylinder (5) is approximately 59 kg (130 lb). 5. Position blade lift cylinder (5) on the machine. Install bolts (3). Torque bolts (3) to 115 ± 7 N·m (85 ± 5 lb ft). 6. Apply Tooling (G) between inserts (11) and ballstuds (12). Install cap (7) and install bolts (6). Note: As required, use shims (10) in order to allow the socket to move freely around ballstud (12). Assemble the same quantity of shims (10) on both sides of ballstud (12). 7/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 9. Illustration 9 g01415039 7. Install clamp (2). Connect hose assemblies (1). Illustration 10 g01397769 8. Remove Tooling (A). 9. Check the hydraulic oil level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for the correct procedure. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Jan 16 12:40:20 UTC+0800 2020 8/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 10. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 140M MOTOR GRADER B9G Configuration: 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 140M Motor Grader Media Number -KENR6424-07 Publication Date -01/04/2015 Date Updated -06/04/2015 i02798701 Sideshift Cylinder - Remove and Install SMCS - 5804-010 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 311-1362 Vacuum Cap 1 Start By: a. Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect". Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed. Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death. Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder. NOTICE Keep all parts clean from contaminants. 1/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 11. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system. 2/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 12. Illustration 1 g01398678 1. Extend side shift cylinder (2) to the left. Move the blade to the forward position. 2. Remove cotter pin (3) (not shown) in order to remove pin (1). Remove bolts (4) in order to remove bracket (5). 3. Retract side shift cylinder (2). 4. Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure - Release". Illustration 2 g01397769 5. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 138 kPa (20 psi). This procedure will pull a vacuum on the hydraulic system. 3/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 13. Illustration 3 g01398701 6. Disconnect hose assemblies (6). Illustration 4 g01398731 7. Remove cotter pin (7). Remove pin (8) and washers (9). Note: Note the number and the location of washers (9) for assembly purposes. Illustration 5 g01398735 8. Attach a suitable lifting device to sideshift cylinder (2). The weight of sideshift cylinder (2) is approximately 91 kg (200 lb). Slide sideshift cylinder (2) to the left and remove sideshift cylinder (2). Disassembly and Assembly Information Table 2 Required Tools Tool Part Number Part Description Qty B 127-4904 Hydraulic Cylinder Repair Stand Gp 1 C 195-4609 Seal Pick 1 D 9U-7868 Spanner Wrench 1 4/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 14. 127-8064 Adapter Plate Gp 1 E 4C-4032 Bearing Mount Compound 1 F 9U-6539 Socket 1 G 1P-0808 Multipurpose Grease 1 Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed. Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death. Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder. Illustration 6 g01012935 (1) Use Tooling (F) in order to torque the bolt. Tighten the bolt to a torque of 900 ± 100 N·m (660 ± 75 lb ft). (2) Lubricate sealing lips with a thin covering of the lubricant that is being sealed. (3) Apply Tooling (E) to the wiper seal groove before you assemble the wiper seal to the head. Note: Lubricate the threads with clean grease and torque head (4) to 600 ± 130 N·m (440 ± 95 lb ft). Use Tooling (G) to apply the grease. Installation Procedure 5/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 15. Table 3 Required Tools Tool Part Number Part Description Qty A 311-1362 Vacuum Cap 1 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 7 g01398735 1. Use a suitable lifting device in order to install sideshift cylinder (2). The weight of sideshift cylinder (2) is approximately 91 kg (200 lb). Illustration 8 g01398731 2. Position washers (9) and install pin (8). Install cotter pin (7). 6/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 16. Illustration 9 g01398701 3. Connect hose assemblies (6). Illustration 10 g01398678 4. Extend side shift cylinder (2) to the left. 5. Position bracket (5). Align side shift cylinder (2) and install pin (1). Install cotter pin (3) (not shown). Illustration 11 g01397769 6. Remove Tooling (A). 7/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 17. 7. Check the hydraulic oil level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check". End By: a. Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Jan 16 12:41:15 UTC+0800 2020 8/8 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 18. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 140M MOTOR GRADER B9G Configuration: 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 140M Motor Grader Media Number -KENR6424-07 Publication Date -01/04/2015 Date Updated -06/04/2015 i02797651 Centershift Cylinder - Remove and Install SMCS - 5223-010 Removal Procedure Start By: a. Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect". Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed. Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death. Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. 1/9 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 19. Suggest: If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading
  • 20. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. Hydraulic oil pressure can remain in the hydraulic system on this machine after the engine and pump have been stopped. Serious injury can result if this pressure is not released before any service is done on the hydraulic systems. In order to prevent possible injury, release the hydraulic system pressure before working on any fitting, hose, or hydraulic component. Lower all attachments to the ground before service is started. If the hydraulic system must be serviced, tested, or adjusted with the attachment in the raised position, the attachments and lift cylinders must be supported properly. Always move the machine to a location away from the travel of other machines. Be sure that other personnel are not near the machine when the engine is running and tests or adjustments are being made. 1. Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure - Release". 2/9 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY ... 2020/1/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...