This document provides instructions for removing, disassembling, assembling, and installing the fuel ratio control component of a Caterpillar 3306 engine. The removal procedure involves disconnecting fuel lines and bolts. The disassembly procedure details removing covers, springs, seals, and other internal parts. The assembly procedure outlines installing these parts in reverse order. Finally, the installation procedure connects the fuel ratio control back to the engine with lines and bolts.
This document provides instructions for removing and installing a fuel ratio control and fuel shutoff solenoid on a Caterpillar 235 Excavator. It describes disconnecting fuel lines and electrical connections, removing mounting bolts and nuts, and installing replacement gaskets and seals. Proper cleaning and use of thread locking compound is emphasized. The fuel ratio control and solenoid are disassembled, inspected, and reassembled according to illustrated steps.
The document provides instructions for removing and installing the fuel ratio control, fuel shutoff solenoid, and automatic timing advance on a Caterpillar 235 Excavator with a 3306 engine. It details the removal and installation procedures, required tools, and safety notices for each component. Diagrams are included to illustrate the instructions.
The document provides instructions for removing and installing the fuel ratio control and fuel shutoff solenoid on a Caterpillar 3306 engine. It details the removal and installation procedures in steps with illustrations. The procedures involve disconnecting lines, removing mounting bolts and nuts, cleaning parts, applying thread lock, and reinstalling in the reverse order. Special tools and safety precautions are noted to properly complete the tasks.
The document provides instructions for removing and installing the fuel ratio control, fuel shutoff solenoid, and automatic timing advance on a Caterpillar 235 Excavator with a 3306 engine. It details the removal and installation procedures with illustrations, required tools, and notices to keep parts clean and contain fluids.
Caterpillar Cat 235 EXCAVATOR (Prefix 64R) Service Repair Manual (64R00596-01...xiapokang564341
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 235 Excavator powered by a 3306 engine. It describes:
1) Removing the front housing and installing tools to rotate the crankshaft and align timing marks.
2) Turning the crankshaft counterclockwise to align camshaft and crankshaft timing marks.
3) Removing plugs and installing a tool in the flywheel housing to find top center of the No. 1 piston for timing.
Caterpillar Cat 235 EXCAVATOR (Prefix 64R) Service Repair Manual (64R00596-01...hvy7sbkw8e
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 235 Excavator powered by a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using tools to turn the crankshaft and align marks on gears to position the #1 piston at top dead center
- Removing two plugs and installing a tool to view the piston position
- Properly positioning the piston for removal and installation of parts
The document emphasizes keeping parts clean to prevent premature wear.
Caterpillar Cat 235 EXCAVATOR (Prefix 64R) Service Repair Manual (64R00596-01...wenxian17880
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 235 Excavator powered by a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using tools to turn the crankshaft and align marks on gears to position the #1 piston at top dead center
- Removing two plugs and installing a tool to view the piston position
- Properly positioning the piston for removal and installation of parts
The document emphasizes keeping parts clean to prevent premature wear.
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...ujjfdjkjskkmdm
This document provides instructions for removing and installing a fuel ratio control and a fuel shutoff solenoid on a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and replacing seals before reinstallation. Proper cleaning and use of thread locking compound is emphasized to prevent contamination.
This document provides instructions for removing and installing a fuel ratio control and fuel shutoff solenoid on a Caterpillar 235 Excavator. It describes disconnecting fuel lines and electrical connections, removing mounting bolts and nuts, and installing replacement gaskets and seals. Proper cleaning and use of thread locking compound is emphasized. The fuel ratio control and solenoid are disassembled, inspected, and reassembled according to illustrated steps.
The document provides instructions for removing and installing the fuel ratio control, fuel shutoff solenoid, and automatic timing advance on a Caterpillar 235 Excavator with a 3306 engine. It details the removal and installation procedures, required tools, and safety notices for each component. Diagrams are included to illustrate the instructions.
The document provides instructions for removing and installing the fuel ratio control and fuel shutoff solenoid on a Caterpillar 3306 engine. It details the removal and installation procedures in steps with illustrations. The procedures involve disconnecting lines, removing mounting bolts and nuts, cleaning parts, applying thread lock, and reinstalling in the reverse order. Special tools and safety precautions are noted to properly complete the tasks.
The document provides instructions for removing and installing the fuel ratio control, fuel shutoff solenoid, and automatic timing advance on a Caterpillar 235 Excavator with a 3306 engine. It details the removal and installation procedures with illustrations, required tools, and notices to keep parts clean and contain fluids.
Caterpillar Cat 235 EXCAVATOR (Prefix 64R) Service Repair Manual (64R00596-01...xiapokang564341
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 235 Excavator powered by a 3306 engine. It describes:
1) Removing the front housing and installing tools to rotate the crankshaft and align timing marks.
2) Turning the crankshaft counterclockwise to align camshaft and crankshaft timing marks.
3) Removing plugs and installing a tool in the flywheel housing to find top center of the No. 1 piston for timing.
Caterpillar Cat 235 EXCAVATOR (Prefix 64R) Service Repair Manual (64R00596-01...hvy7sbkw8e
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 235 Excavator powered by a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using tools to turn the crankshaft and align marks on gears to position the #1 piston at top dead center
- Removing two plugs and installing a tool to view the piston position
- Properly positioning the piston for removal and installation of parts
The document emphasizes keeping parts clean to prevent premature wear.
Caterpillar Cat 235 EXCAVATOR (Prefix 64R) Service Repair Manual (64R00596-01...wenxian17880
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 235 Excavator powered by a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using tools to turn the crankshaft and align marks on gears to position the #1 piston at top dead center
- Removing two plugs and installing a tool to view the piston position
- Properly positioning the piston for removal and installation of parts
The document emphasizes keeping parts clean to prevent premature wear.
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...ujjfdjkjskkmdm
This document provides instructions for removing and installing a fuel ratio control and a fuel shutoff solenoid on a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and replacing seals before reinstallation. Proper cleaning and use of thread locking compound is emphasized to prevent contamination.
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...fujsjefkksekmme
This document provides instructions for removing and disassembling a fuel ratio control component from a Caterpillar 235B Excavator. It describes:
- Disconnecting fuel lines and removing mounting bolts to remove the fuel ratio control
- Removing various seals, springs, and housings when disassembling the fuel ratio control
- Instructions for cleaning, inspecting, and replacing worn parts before reassembling
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...ujjfdjkjskkmdm
This document provides instructions for removing and installing a fuel ratio control and a fuel shutoff solenoid on a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and replacing seals before reinstallation. Proper cleaning and use of thread locking compound is emphasized to prevent contamination.
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...fujsfskekem
This document provides instructions for removing and disassembling a fuel ratio control component from a Caterpillar 235B Excavator. It describes:
- Disconnecting fuel lines and removing mounting bolts to remove the fuel ratio control
- Removing various seals, springs, and housings when disassembling the fuel ratio control
- Instructions for cleaning, inspecting, and replacing worn parts before reassembling
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...ujjfdjkjskkmdm
This document provides instructions for removing and installing a fuel ratio control and a fuel shutoff solenoid on a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and replacing seals before reinstallation. Proper cleaning and use of thread locking compound is emphasized to prevent contamination.
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...uudfjjjskkemmd
This document provides instructions for removing and disassembling a fuel ratio control component from a Caterpillar 235B Excavator. It describes:
- Disconnecting fuel lines and removing mounting bolts to remove the fuel ratio control
- Removing various seals, springs, and housings when disassembling the fuel ratio control
- Instructions for cleaning, inspecting, and replacing worn parts before reassembling
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...ujjfdjkjskkmdm
This document provides instructions for removing and installing a fuel ratio control and a fuel shutoff solenoid on a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and replacing seals before reinstallation. Proper cleaning and use of thread locking compound is emphasized to prevent contamination.
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Removing two plugs and installing a tool in the flywheel housing to view and install bolts
- Checking valve positions to confirm piston position before removal
The timing advance is then removed following any additional steps needed when the front cover is or isn't installed.
This document provides instructions for removing the automatic timing advance from a 235B excavator with a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Installing tools through plug holes in the flywheel housing to view and install bolts while timing the fuel injection pump
- Checking valve operation to confirm piston position before removing the timing advance
The instructions include illustrations and specify cleaning parts to prevent contamination.
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Removing two plugs and installing a tool in the flywheel housing to view and install bolts
- Checking valve operation to confirm piston position before removal
The timing advance is then removed following any additional steps needed when the front cover is or isn't installed.
This document provides instructions for removing the automatic timing advance from a 235B excavator with a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Installing bolts and spacers into holes in the flywheel housing to view and install tools
- Turning the crankshaft to position the #1 piston for removal of the timing advance
The document provides instructions to remove the fuel ratio control and fuel shutoff solenoid from a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and noting the need to clean parts and apply thread lock compound. Technicians are advised to refer to other sections for adjustment procedures after installing these components.
The document provides instructions to remove the fuel ratio control and fuel shutoff solenoid from a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and noting the need to clean parts and apply threadlock. Detailed illustrations and lists of required tools are included to guide technicians through the process.
The document provides instructions to remove the fuel ratio control and fuel shutoff solenoid from a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and noting the need to clean parts and apply thread lock compound. Technicians are advised to refer to other sections for adjustment procedures after installing these components.
This document provides instructions for removing the automatic timing advance from a 235B excavator with a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Installing tools in the flywheel housing and using an engine turning tool to find top dead center of the #1 piston compression stroke
- Removing the timing advance once positioning is complete
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...fujsekfksmemer
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Removing two plugs and installing a tool in the flywheel housing to view and install bolts
- Checking valve positions to confirm piston position before removal
The timing advance is then removed following any additional steps needed when the front cover is or isn't installed.
This document provides instructions for removing, disassembling, assembling, and installing the fuel ratio control component of a Caterpillar 3306 engine. It outlines the necessary tools and safety precautions. The removal procedure involves disconnecting fuel lines and bolts. Disassembly requires removing various seals, springs, and housing pieces. Assembly is the reverse of disassembly. Installation connects the fuel lines and bolts.
This document provides instructions for removing the automatic timing advance from a Caterpillar 235B excavator with a 3306 engine. It describes:
- Removing the front housing for access
- Using tools to turn the crankshaft and align timing marks for locating piston position
- Removing two plugs and installing a tool in the flywheel housing for viewing
- Turning the flywheel to position the #1 piston at top dead center for removal of parts
The purpose is to properly time the fuel injection pump during disassembly and repair work.
This document provides instructions for removing the automatic timing advance from a Caterpillar 235B excavator with a 3306 engine. It describes:
1) Removing the front housing and installing turning tools to rotate the crankshaft and align timing marks.
2) Removing plugs to access bolt holes for installation of additional turning tools.
3) Rotating the crankshaft clockwise and counterclockwise to find the top center position of the number 1 piston for removal of timing components.
Caterpillar Cat 235 EXCAVATOR (Prefix 32K) Service Repair Manual (32K00789-01...xiapokang564341
This document provides instructions for removing and installing the automatic timing advance on a 3306 engine. It outlines the required tools and gives a step-by-step process that involves installing pins and bolts to hold the timing advance in place while tightening another bolt to the specified torque. The timing advance is then secured to the fuel pump camshaft and the tools are removed to complete the installation.
Caterpillar Cat 235 EXCAVATOR (Prefix 32K) Service Repair Manual (32K00789-01...hvy7sbkw8e
This document provides instructions for removing and installing the automatic timing advance on a 3306 engine. It outlines the required tools and gives a step-by-step process that involves installing pins and bolts to hold the timing advance in place while tightening another bolt to the specified torque. The timing advance is then secured to the fuel pump camshaft and the tools are removed to complete the installation.
CASE IH STX450 Tractor Service Repair Manual.pdfgen78guozun
The document provides step-by-step instructions for removing an engine from a tractor. It lists 27 steps including draining fluids, disconnecting wiring harnesses, removing hoses, and detaching mounting hardware. The instructions cover disconnecting batteries, removing the radiator, hood, fuel lines, air intake components, and other parts to fully separate the engine from the tractor.
CASE IH STX440 Tractor Service Repair Manual.pdfgen78guozun
The document provides step-by-step instructions for removing an engine from a tractor. It lists 27 steps including draining fluids, disconnecting wiring harnesses, removing hoses, and detaching mounting hardware. The instructions cover disconnecting batteries, removing the radiator, hood, fuel lines, air intake components, and other parts to fully separate the engine from the tractor.
More Related Content
Similar to Caterpillar Cat 235 EXCAVATOR (Prefix 64R) Service Repair Manual (64R00596-01257).pdf
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...fujsjefkksekmme
This document provides instructions for removing and disassembling a fuel ratio control component from a Caterpillar 235B Excavator. It describes:
- Disconnecting fuel lines and removing mounting bolts to remove the fuel ratio control
- Removing various seals, springs, and housings when disassembling the fuel ratio control
- Instructions for cleaning, inspecting, and replacing worn parts before reassembling
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...ujjfdjkjskkmdm
This document provides instructions for removing and installing a fuel ratio control and a fuel shutoff solenoid on a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and replacing seals before reinstallation. Proper cleaning and use of thread locking compound is emphasized to prevent contamination.
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...fujsfskekem
This document provides instructions for removing and disassembling a fuel ratio control component from a Caterpillar 235B Excavator. It describes:
- Disconnecting fuel lines and removing mounting bolts to remove the fuel ratio control
- Removing various seals, springs, and housings when disassembling the fuel ratio control
- Instructions for cleaning, inspecting, and replacing worn parts before reassembling
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...ujjfdjkjskkmdm
This document provides instructions for removing and installing a fuel ratio control and a fuel shutoff solenoid on a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and replacing seals before reinstallation. Proper cleaning and use of thread locking compound is emphasized to prevent contamination.
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...uudfjjjskkemmd
This document provides instructions for removing and disassembling a fuel ratio control component from a Caterpillar 235B Excavator. It describes:
- Disconnecting fuel lines and removing mounting bolts to remove the fuel ratio control
- Removing various seals, springs, and housings when disassembling the fuel ratio control
- Instructions for cleaning, inspecting, and replacing worn parts before reassembling
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...ujjfdjkjskkmdm
This document provides instructions for removing and installing a fuel ratio control and a fuel shutoff solenoid on a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and replacing seals before reinstallation. Proper cleaning and use of thread locking compound is emphasized to prevent contamination.
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Removing two plugs and installing a tool in the flywheel housing to view and install bolts
- Checking valve positions to confirm piston position before removal
The timing advance is then removed following any additional steps needed when the front cover is or isn't installed.
This document provides instructions for removing the automatic timing advance from a 235B excavator with a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Installing tools through plug holes in the flywheel housing to view and install bolts while timing the fuel injection pump
- Checking valve operation to confirm piston position before removing the timing advance
The instructions include illustrations and specify cleaning parts to prevent contamination.
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Removing two plugs and installing a tool in the flywheel housing to view and install bolts
- Checking valve operation to confirm piston position before removal
The timing advance is then removed following any additional steps needed when the front cover is or isn't installed.
This document provides instructions for removing the automatic timing advance from a 235B excavator with a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Installing bolts and spacers into holes in the flywheel housing to view and install tools
- Turning the crankshaft to position the #1 piston for removal of the timing advance
The document provides instructions to remove the fuel ratio control and fuel shutoff solenoid from a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and noting the need to clean parts and apply thread lock compound. Technicians are advised to refer to other sections for adjustment procedures after installing these components.
The document provides instructions to remove the fuel ratio control and fuel shutoff solenoid from a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and noting the need to clean parts and apply threadlock. Detailed illustrations and lists of required tools are included to guide technicians through the process.
The document provides instructions to remove the fuel ratio control and fuel shutoff solenoid from a Caterpillar 3306 engine. It describes disconnecting fuel lines and electrical connections, removing mounting hardware, and noting the need to clean parts and apply thread lock compound. Technicians are advised to refer to other sections for adjustment procedures after installing these components.
This document provides instructions for removing the automatic timing advance from a 235B excavator with a 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Installing tools in the flywheel housing and using an engine turning tool to find top dead center of the #1 piston compression stroke
- Removing the timing advance once positioning is complete
Caterpillar cat 235 b excavator (prefix 7wc) service repair manual (7wc00001 ...fujsekfksmemer
This document provides instructions for removing and installing the automatic timing advance on a Caterpillar 3306 engine. It describes:
- Removing the front housing before removing the timing advance
- Using engine turning tools to position the crankshaft and camshaft gears and locate the #1 piston at top dead center
- Removing two plugs and installing a tool in the flywheel housing to view and install bolts
- Checking valve positions to confirm piston position before removal
The timing advance is then removed following any additional steps needed when the front cover is or isn't installed.
This document provides instructions for removing, disassembling, assembling, and installing the fuel ratio control component of a Caterpillar 3306 engine. It outlines the necessary tools and safety precautions. The removal procedure involves disconnecting fuel lines and bolts. Disassembly requires removing various seals, springs, and housing pieces. Assembly is the reverse of disassembly. Installation connects the fuel lines and bolts.
This document provides instructions for removing the automatic timing advance from a Caterpillar 235B excavator with a 3306 engine. It describes:
- Removing the front housing for access
- Using tools to turn the crankshaft and align timing marks for locating piston position
- Removing two plugs and installing a tool in the flywheel housing for viewing
- Turning the flywheel to position the #1 piston at top dead center for removal of parts
The purpose is to properly time the fuel injection pump during disassembly and repair work.
This document provides instructions for removing the automatic timing advance from a Caterpillar 235B excavator with a 3306 engine. It describes:
1) Removing the front housing and installing turning tools to rotate the crankshaft and align timing marks.
2) Removing plugs to access bolt holes for installation of additional turning tools.
3) Rotating the crankshaft clockwise and counterclockwise to find the top center position of the number 1 piston for removal of timing components.
Caterpillar Cat 235 EXCAVATOR (Prefix 32K) Service Repair Manual (32K00789-01...xiapokang564341
This document provides instructions for removing and installing the automatic timing advance on a 3306 engine. It outlines the required tools and gives a step-by-step process that involves installing pins and bolts to hold the timing advance in place while tightening another bolt to the specified torque. The timing advance is then secured to the fuel pump camshaft and the tools are removed to complete the installation.
Caterpillar Cat 235 EXCAVATOR (Prefix 32K) Service Repair Manual (32K00789-01...hvy7sbkw8e
This document provides instructions for removing and installing the automatic timing advance on a 3306 engine. It outlines the required tools and gives a step-by-step process that involves installing pins and bolts to hold the timing advance in place while tightening another bolt to the specified torque. The timing advance is then secured to the fuel pump camshaft and the tools are removed to complete the installation.
Similar to Caterpillar Cat 235 EXCAVATOR (Prefix 64R) Service Repair Manual (64R00596-01257).pdf (20)
CASE IH STX450 Tractor Service Repair Manual.pdfgen78guozun
The document provides step-by-step instructions for removing an engine from a tractor. It lists 27 steps including draining fluids, disconnecting wiring harnesses, removing hoses, and detaching mounting hardware. The instructions cover disconnecting batteries, removing the radiator, hood, fuel lines, air intake components, and other parts to fully separate the engine from the tractor.
CASE IH STX440 Tractor Service Repair Manual.pdfgen78guozun
The document provides step-by-step instructions for removing an engine from a tractor. It lists 27 steps including draining fluids, disconnecting wiring harnesses, removing hoses, and detaching mounting hardware. The instructions cover disconnecting batteries, removing the radiator, hood, fuel lines, air intake components, and other parts to fully separate the engine from the tractor.
CASE IH STX375 Tractor Service Repair Manual.pdfgen78guozun
The document provides instructions for removing and installing an engine. It is a multi-step process that begins by preparing the machine, disconnecting electrical and fluid connections, removing ancillary components, and then lifting the engine out of the machine. The installation process reverses these steps, carefully positioning and securing the engine before reconnecting all electrical and fluid lines. Safety is emphasized throughout with warnings about proper lifting and ensuring all personnel are clear during movements.
CASE IH STX325 Tractor Service Repair Manual.pdfgen78guozun
The document provides instructions for removing and installing an engine. It is a multi-step process that begins by preparing the machine, disconnecting electrical and fluid connections, removing ancillary components, and then lifting the engine out of the machine. The installation process reverses these steps, carefully positioning and securing the engine before reconnecting all electrical and fluid lines. Safety is emphasized throughout with warnings about proper lifting equipment and blocking the machine securely.
Caterpillar Cat 257 Multi Terrain Loader (Prefix CMM) Service Repair Manual (...gen78guozun
This document provides instructions for removing and installing various components of a 3034 engine, including:
- Removing the flywheel, which requires drilling holes in it and using guide bolts.
- Removing the crankshaft rear seal using a drill bit and slide hammer puller to avoid damaging the crankshaft.
- Installing the crankshaft rear seal by lubricating it and setting it in place with a seal installer tool.
- Removing the flywheel housing by detaching lifting brackets, removing bolts, and tapping it off dowels.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...gen78guozun
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
This document provides instructions for removing and installing a piston pump on a 246D Skid Steer Loader. It outlines the required tools and gives step-by-step instructions to disassemble and assemble the pump. To remove the pump, hoses and harnesses must be disconnected, then lifting tools are used to support the pump while bolts are removed. Reinstallation is the reverse of removal. Detailed illustrations accompany each step to show how to remove components like valves, seals, and housing pieces, and reinstall them in the proper order.
CASE IH STX275 Tractor Service Repair Manual.pdfgen78guozun
The document provides step-by-step instructions for removing an engine from a tractor. It lists 27 steps including draining fluids, disconnecting wiring harnesses, removing hoses, and detaching mounting hardware. The goal is to fully separate the engine from other tractor components to allow for its removal from the vehicle. Safety precautions are advised when handling fluids, batteries, and heavy engine components.
1) The document provides instructions for removing and installing a lifter group on a C2.2 engine. It lists the required tool and removal steps, which include using a telescopic magnet to remove the lifters from the valve mechanism housing.
2) Installation instructions include cleaning components, lubricating the lifters, and inserting the lifters into the valve mechanism housing using the telescopic magnet. Proper lifter orientation is noted.
3) Completing the job involves installing the valve mechanism cover after checking lifter rotation.
The document provides instructions for removing and installing an exhaust manifold on a 249D Compact Track Loader powered by a C2.2 engine. The removal procedure involves loosening fasteners, removing the exhaust manifold and gasket, and removing any studs. For installation, clean surfaces are required, a new gasket is installed, the manifold is aligned and fastened, and bolts are tightened to the specified torque. The document also provides instructions for removing and installing valve springs, using the appropriate tools to compress springs at each step.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...gen78guozun
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
This document provides instructions for servicing components of a 246D Skid Steer Loader powered by a C3.3B engine. It includes procedures for removing and installing the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures note important steps like keeping parts clean, applying lubricants, using the proper tools, and torquing fasteners to the specified values. Cautions are also included to contain fluids and dispose of them properly.
This document provides instructions for removing and installing a fuel injection pump on a 246D Skid Steer Loader powered by a C3.3B engine. The procedure involves disconnecting fuel lines, removing mounting nuts and bolts, and extracting the pump. When installing, new gasket shims are used and bolts are tightened to the specified torques. Cleanliness of all fuel system components is emphasized to prevent contamination.
This document provides instructions for removing and installing the automatic timing advance and fuel injection pump housing & governor on a 245D Excavator with a 3406C diesel engine. It describes in detail the steps to take the components off the engine, including removing mounting bolts, nuts, hoses and other fasteners. The instructions note to cap or plug any openings immediately to prevent contamination. They also warn to use caution when removing certain parts like springs.
This document provides instructions for removing and installing various engine components on a 246 Skid Steer Loader, including the turbocharger, exhaust manifold, inlet manifold, and inlet and exhaust valve springs. The removal and installation procedures describe loosening clamps, removing bolts, plugging openings to prevent contamination, cleaning surfaces, and installing new gaskets. Tools required are also listed.
Caterpillar Cat 245B SERIES II EXCAVATOR (Prefix 6MF) Service Repair Manual (...gen78guozun
This document provides instructions for disassembling and assembling starting motors for a 245B Series II excavator. It describes removing components like the rear housing, brush holder, pinion drive housing, and shift lever housing. Tools needed are listed. Detailed photos show each step, such as lifting brush springs, removing retaining rings, and cleaning parts with mineral spirits. Instructions are provided for both 42-MT and 37-MT/41-MT style starting motors.
This document provides instructions for disassembling and assembling the swing and track motors of a 245 Excavator model. It describes over 30 steps to disassemble the motors by removing components like the shuttle valve, pump head, body, barrel, pistons, and more. It then describes over 20 steps for reassembling the motors, providing details on cleaning parts, applying oil, pressing components, setting bearings, and checking clearance. The goal is to properly disassemble and reassemble the swing and track motors while identifying parts to ensure correct alignment during reassembly.
This document provides instructions for disassembling and assembling the swing drive of a 245 Excavator model. It describes removing and installing over 40 individual parts in multiple steps. Key parts that must be removed include the swing drive motor, brake, various bearings, gears, seals, tubes, and manifolds. The instructions specify cleaning all parts thoroughly and applying anti-seize compound before reassembling the swing drive using the reverse of the disassembly steps. Special tools are required and parts must be heated or cooled to specific temperatures during installation.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...gen78guozun
This document provides instructions for servicing components of a 245 Excavator's 3406 vehicular engine, including:
- Disassembling and reassembling the fuel injection pump housing, which involves removing various parts like pumps, racks, lifters, and bearings, and replacing them in the proper order.
- Removing and installing the inlet manifold, which connects to the cylinder head and air cleaner components.
- Removing the aftercooler unit, which involves disconnecting hoses and pipes, removing mounting bolts, and taking out the core component. Detailed steps are provided for each disassembly and reassembly process.
The document provides instructions for removing and installing the engine oil pump on a 242B2 Skid Steer Loader with a 3024C engine. The removal procedure involves removing the front housing, idler gear components, suction pipe, and idler hub. The installation procedure outlines installing the idler hub, gears, rotor, cover, and suction pipe and includes checking end play clearance. Safety notices are provided throughout regarding contained fluids, cleanliness, and spring loaded components.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Real-time driver monitoring is one of the easiest ways to make fleet management efficient as well as seamless. Connected vehicle solutions such as fleet GPS trackers and associated software help businesses in several ways. Refer to the post below for more details.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 64R
Configuration: 235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00903297
Fuel Ratio Control - Remove
SMCS - 1278-011
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/2
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00460630
1. Disconnect fuel pressure line (3). Remove two bolts (2) .
2. Move fuel ratio control (1) upward in order to disengage the fuel ratio control from the lever
assembly in the governor.
Illustration 2 g00460631
3. Remove four O-ring seals (4) and screen assembly (5) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 30 15:00:58 UTC+0800 2019
2/2
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 64R
Configuration: 235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00903551
Fuel Ratio Control - Disassemble
SMCS - 1278-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1820 Fixture Assembly 1
B 1P-1855 Retaining Ring Pliers 1
C 6V-9072 Guide 1
Start By:
A. Remove the fuel ratio control. Refer to Disassembly and Assembly, "Fuel Ratio Control -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 1 g00460737
1. Remove cover (1) and O-ring seal (2) .
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
2. In order to release the spring force, hold cover (3) in position and slowly remove the two
bolts that hold cover (3) in place.
Illustration 2 g00460791
3. Remove spring (4), washer (5) and diaphragm (6) from retainer (7). Remove retainer (7)
from housing (8) .
2/3
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 3 g00460793
4. Remove nut (13) from valve extension (12) and remove valve extension (12) from retainer
(7). Remove stem (9) from valve extension (12). Remove spring (10) and O-ring seal (11)
from valve extension (12) .
Illustration 4 g00460795
5. Remove spring (14) and retainer (15) from housing (8) .
6. All parts should be cleaned and inspected. Replace all parts that are worn or damaged.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 30 15:01:54 UTC+0800 2019
3/3
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 64R
Configuration: 235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01135000
Fuel Ratio Control - Assemble
SMCS - 1278-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1820 Fixture Assembly 1
B 1P-1855 Retaining Ring Pliers 1
C 6V-9072 Guide 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the O-ring and the diaphragm. If the O-ring or the diaphragm is
worn or damaged use new parts for replacement.
1/4
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 1 g00460801
1. Install spring (1) and retainer (2) into housing (3) .
Illustration 2 g00460828
2. Install O-ring seal (6) and spring (5) into valve extension (7). Install stem (4) into valve
extension (7). Secure valve extension (7) to retainer (8) with nut (9) .
Illustration 3 g00460830
2/4
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 3. Install stem (4) and retainer (8) into housing (3) .
Illustration 4 g00460912
4. Install diaphragm (12), washer (11) and spring (10) on retainer (8) .
Illustration 5 g00460914
Illustration 6 g00460917
3/4
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 5. Install cover (13) on housing (3). Secure cover (13) with two bolts and washers.
6. Install O-ring seal (15) onto cover (14) and install cover (14) onto cover (13). Secure cover
(14) with two bolts.
Note: Refer to Testing and Adjusting, "Fuel System" for additional information on the
adjustment procedure for the fuel ratio control.
End By: Install the fuel ratio control. Refer to Disassembly and Assembly, "Fuel Ratio Control -
Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 30 15:02:50 UTC+0800 2019
4/4
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 64R
Configuration: 235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00903481
Fuel Ratio Control - Install
SMCS - 1278-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00460631
1. Screen assembly (5) and four O-ring seals (4) should be inspected, replaced and installed.
1/2
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 2 g00460630
2. Put fuel ratio control (1) in position and engage the fuel ratio control with the lever
assembly in the governor.
3. Install bolts (2) that hold the fuel ratio control and connect fuel pressure line (3) to fuel ratio
control (1). Refer to Testing and Adjusting, "Fuel System" for more information on the
adjustment procedure for the fuel ratio control.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 30 15:03:45 UTC+0800 2019
2/2
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 64R
Configuration: 235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00879991
Fuel Shutoff Solenoid - Remove and Install
SMCS - 1259-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00475568
1. Remove nut (1) and the washer. Disconnect ground wire (4) from the fuel shutoff solenoid.
2. Remove two nuts (2) and the washers.
1/2
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 3. Remove fuel shutoff solenoid (3) and the gasket.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00475568
1. Install the gasket and fuel shutoff solenoid (3) .
2. Apply 9S-3263 Thread Lock Compound on the threads for two nuts (2) .
3. Install the washers and two nuts (2) .
4. Connect ground wire (4) to the fuel shutoff solenoid. Install nut (1) and the washer.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 30 15:04:41 UTC+0800 2019
2/2
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 64R
Configuration: 235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00930839
Automatic Timing Advance - Remove
SMCS - 1272-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-7307 Engine Turning Tool 1
B 0T-0065 Bolt 1
C
9S-9155 Spacer 1
8S-2264 Pump Impeller Puller 2
0T-0513 Bolt 2
5P-1075 Hard Washer 2
Start By:
A. Remove the front housing. Refer to Disassembly and Assembly, "Front Housing - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 1. Follow the procedure in Steps 3 and 4 in order to time the fuel injection pump when the
front cover is removed. Follow the procedure in Steps 6 and 7 in order to time the fuel
injection pump when the front cover is installed.
Note: The No. 1 piston should be at the top center position on the compression stroke at the
start of all timing procedures.
Note: The engine is seen from the flywheel end when the direction of the crankshaft
rotation is given.
Illustration 1 g00474593
2. Remove the electric starting motor and install Tool (A) .
Illustration 2 g00474592
3. Turn the crankshaft counterclockwise until the "C" on the crankshaft gear and the "C" on
the camshaft gear are in alignment.
2/4
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 3 g00474594
4. Remove two plugs and install Tool (B) in the flywheel housing. The large plug hole is for
viewing.
5. To find the top center compression stroke for the No. 1 piston, use Tool (A) in order to turn
the flywheel clockwise for approximately 30 degrees. This procedure should be used to
remove all of the end play from the timing gears.
6. Use Tool (A) in order to turn the flywheel counterclockwise in the direction of the engine
rotation until Tool (B) can be installed in the flywheel. The piston is at the top center
position.
Note: If you go past the bolt hole, you must start the procedure again.
Note: Remove the breather assembly from the valve mechanism cover. The piston is at the
top center position on the compression stroke when the inlet valve is closed and the exhaust
valve is closed for the No. 1 cylinder. You must be able to move the rocker arms up and
down with your hand.
Illustration 4 g00474595
7. Remove bolt (1) and washer (2) that secures the automatic timing advance.
NOTICE
3/4
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. The automatic timing advance must have support during removal in
order to help prevent damage to components.
Illustration 5 g00474596
8. Install bolt (1) and leave a 6.35 mm (.250 inch) gap. Install Tool (C), as shown. Tighten the
stud in order to loosen the fuel pump drive gear from the taper on the fuel injection pump
camshaft.
9. Remove Tool (C) and bolt (1). Remove the automatic timing advance.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 30 15:05:37 UTC+0800 2019
4/4
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 64R
Configuration: 235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00935438
Automatic Timing Advance - Disassemble
SMCS - 1272-015
Disassembly Procedure
Start By:
A. Remove the automatic timing advance unit. Refer to Disassembly and Assembly,
"Automatic Timing Advance - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00476292
1/3
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 1. Remove two screws (1) and plate (2) .
NOTICE
The weights are held in position with two springs for each weight that
is under compression. Carefully remove the weights and the springs in
order to help prevent possible injury.
Illustration 2 g00476293
2. Remove springs (3) and (5), weight (6) and slide (4) from each side of the assembly.
2/3
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 3 g00476294
3. If necessary, remove gear (7). Remove seals (8) and (9) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 30 15:06:33 UTC+0800 2019
3/3
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 64R
Configuration: 235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00935599
Automatic Timing Advance - Assemble
SMCS - 1272-016
Assembly Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 1 g00476382
1. If dowels (3) were removed from the gear hub, installation dimension (X) is 9.00 ± 0.50 mm
(.354 ± .020 inch).
2. Install seals (4) and (5) .
3. Put gear (1) in position on hub assembly (2) .
Illustration 2 g00476383
4. Install slide (7), weight (9) and springs (6) and (8) on each side of the assembly.
2/3
235 EXCAVATOR 64R00596-01257 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/9/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...