This document provides disassembly instructions for the rear axle, differential, and final drive of a 14M3 motor grader. It lists 51 steps to fully disassemble these components, including removing sprockets, bearings, seals, housings, gears, and other parts. Precautions are provided to note shim quantities and orientations. Required tools include brackets, levers, bolts, and pullers. Weights of removed parts are specified, ranging from 25 kg for a sprocket to 1588 kg for the entire rear axle, differential, and final drive assembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...jdksmmdmdd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removing each part safely. Weights of removed parts are given to assist with lifting and handling.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...ze6074xunong
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fujkse9didkke3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fuusejkddmmd3e
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove components like sprockets, bearings, seals, housings, and shafts. Detailed illustrations accompany each step to show positioning of tools and components being removed. Cautions are provided about keeping parts clean and noting order and quantities of shims during disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removal. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...orrf0370383
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for separating each part in the correct order. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Safety notices are included to properly support heavy components and avoid injury from released spring forces during disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...dujkdksmdmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...jdksmmdmdd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removing each part safely. Weights of removed parts are given to assist with lifting and handling.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...ze6074xunong
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fujkse9didkke3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fuusejkddmmd3e
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove components like sprockets, bearings, seals, housings, and shafts. Detailed illustrations accompany each step to show positioning of tools and components being removed. Cautions are provided about keeping parts clean and noting order and quantities of shims during disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removal. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...orrf0370383
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for separating each part in the correct order. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Safety notices are included to properly support heavy components and avoid injury from released spring forces during disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...dujkdksmdmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...fjsekdmmeed
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and disassembles components such as sprockets, bearings, seals, gears, housings, and shafts. Safety notices are included to properly handle parts and avoid injury. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...fjjsekkdmme
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and disassembles components such as sprockets, bearings, seals, gears, housings, and shafts. Safety notices are included to properly handle parts and avoid injury. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...hean57759707
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed, including sprockets, gears, seals, bearings, housings, and other components. Detailed illustrations are provided for each step to ensure safe and proper disassembly. Workers are advised to keep all parts clean and note the order of any shims or parts for reassembly.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...dkdmidkkdk
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removal. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fjkdksmmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...fuusejkddmmd3e
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and what fasteners, tools, and equipment are needed.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...dujkdksmdmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and which fasteners, tools, and equipment are needed.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 3 sentences or less:
It outlines 42 steps to disassemble the rear axle, differential, and final drive components, including removing sprockets, bearings, seals, gears, housings, and other parts, using various tools like link brackets, sleeves, levers, bolts, and pullers. Precautions are given to note shim quantities and orders, keep parts clean, and support heavy components during removal. Detailed illustrations accompany each step.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...jdksmmdmdd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
The document outlines 50 steps to disassemble the rear axle, differential, and final drive of a 16M Motor Grader, requiring various tools and lifting devices to remove components like sprockets, bearings, seals, gears, and housings. Precautions are provided to note shim quantities and orders. Detailed illustrations accompany each step to correctly disassemble the power train components.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove each component in the proper order. Key steps include using lifting devices and pullers to remove the sprockets, housing, carrier assembly, pinion, and differential parts. Detailed illustrations are provided for each step. Proper documentation of shims and seals is emphasized to ensure correct reassembly.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...ze6074xunong
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove each component in the proper order. Key steps include using lifting devices and pullers to remove the sprockets, housing, carrier assembly, pinion, and differential parts. Detailed illustrations are provided for each step. Proper documentation of shims and seals is emphasized to ensure correct reassembly.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...fujkse9didkke3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It details removing components such as sprockets, bearings, seals, gears, housings, and shafts. Precautions are given to note shim quantities and orders. Tools required include link brackets, sleeves, pullers, bolts, sockets, and presses. Personnel are warned of component weights up to approximately 1588 kg to avoid injury.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...orrf0370383
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and which fasteners, tools, and equipment are used.
Caterpillar cat 16 m motor grader (prefix r9h) service repair manual (r9h0000...fjsekdmmeed
This document provides disassembly instructions for a 16M motor grader rear axle, differential, and final drive. It lists 50 steps to fully disassemble these components, including removing gears, shafts, seals, housings, and other parts. Various tools are required, and weights of removed parts are provided. Detailed illustrations accompany each step to show how to position the components and which fasteners, seals, or other pieces to remove.
Caterpillar cat 16 m motor grader (prefix r9h) service repair manual (r9h0000...dkdmidkkdk
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It details removing components such as sprockets, bearings, seals, gears, housings, and shafts. Precautions are given to note shim quantities and orders. Tools required include link brackets, sleeves, pullers, bolts, sockets, and presses. Personnel are warned of component weights up to approximately 1588 kg to avoid injury.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...hean57759707
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and noting weights of removed parts. Detailed illustrations accompany each step to show components and tooling placement. Safety notices are included and components are to be kept clean from contaminants to prevent damage.
This document provides assembly instructions for a piston pump used in a wheeled excavator model M320F. It consists of 50 steps to assemble the various components of the pump in the correct order. The components include springs, retainers, seals, valves, plates, bushings, shafts, and other parts. Precautions are provided for parts that are spring loaded to prevent injury during assembly.
The document provides instructions for disassembling and assembling the final drive carriers, hubs, and brakes of a M320F wheeled excavator. It lists the required tools and gives step-by-step procedures for removing and installing components such as the carrier housing, planetary gears, brake discs, seals, and bearings. Clearances for the brake discs are also specified to ensure proper functioning.
This document provides assembly instructions for an M318 excavator transmission. It lists required tools and parts, and provides step-by-step instructions to assemble the transmission components, including gears, shafts, seals, bearings, and housing. Proper end play is checked at several steps. Lubricants are specified, and cleanliness during assembly is emphasized.
Caterpillar Cat M315 Excavator (Prefix 7ML) Service Repair Manual (7ML00001-0...orrf0370383
This document provides instructions for removing and installing a swing motor and swing drive on an M315 excavator. It describes releasing hydraulic pressure, draining oil, disconnecting hoses, and removing and installing various components like bolts, seals, and motors. Safety precautions are provided regarding containing fluids, releasing pressure, and preventing personal injury. Detailed step-by-step instructions are given for disassembly and reassembly.
The document provides removal and installation instructions for a precooler, water temperature regulator housing, water pump, and other engine components. It includes notices about containing fluids, keeping parts clean, and lists required tools. The step-by-step instructions describe disconnecting hoses and electrical connections, removing mounting bolts and components, and installing parts in reverse order while applying sealant compounds as needed. Illustrations show the component locations and part numbers.
This document provides instructions for installing and removing components of the front gear group of a C18 industrial engine. It describes:
1. Cleaning and inspecting components before installation and removing components in reverse order of installation.
2. Installing the front plate and gears, including adjusting backlash between gears.
3. Lubricating and torquing fasteners to specified values.
More Related Content
Similar to Caterpillar Cat 14M3 Motor Grader (Prefix N9S) Service Repair Manual (N9S00001 and up).pdf
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...fjsekdmmeed
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and disassembles components such as sprockets, bearings, seals, gears, housings, and shafts. Safety notices are included to properly handle parts and avoid injury. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...fjjsekkdmme
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and disassembles components such as sprockets, bearings, seals, gears, housings, and shafts. Safety notices are included to properly handle parts and avoid injury. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...hean57759707
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed, including sprockets, gears, seals, bearings, housings, and other components. Detailed illustrations are provided for each step to ensure safe and proper disassembly. Workers are advised to keep all parts clean and note the order of any shims or parts for reassembly.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...dkdmidkkdk
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removal. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fjkdksmmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...fuusejkddmmd3e
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and what fasteners, tools, and equipment are needed.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...dujkdksmdmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and which fasteners, tools, and equipment are needed.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 3 sentences or less:
It outlines 42 steps to disassemble the rear axle, differential, and final drive components, including removing sprockets, bearings, seals, gears, housings, and other parts, using various tools like link brackets, sleeves, levers, bolts, and pullers. Precautions are given to note shim quantities and orders, keep parts clean, and support heavy components during removal. Detailed illustrations accompany each step.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...jdksmmdmdd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
The document outlines 50 steps to disassemble the rear axle, differential, and final drive of a 16M Motor Grader, requiring various tools and lifting devices to remove components like sprockets, bearings, seals, gears, and housings. Precautions are provided to note shim quantities and orders. Detailed illustrations accompany each step to correctly disassemble the power train components.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove each component in the proper order. Key steps include using lifting devices and pullers to remove the sprockets, housing, carrier assembly, pinion, and differential parts. Detailed illustrations are provided for each step. Proper documentation of shims and seals is emphasized to ensure correct reassembly.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...ze6074xunong
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove each component in the proper order. Key steps include using lifting devices and pullers to remove the sprockets, housing, carrier assembly, pinion, and differential parts. Detailed illustrations are provided for each step. Proper documentation of shims and seals is emphasized to ensure correct reassembly.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...fujkse9didkke3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It details removing components such as sprockets, bearings, seals, gears, housings, and shafts. Precautions are given to note shim quantities and orders. Tools required include link brackets, sleeves, pullers, bolts, sockets, and presses. Personnel are warned of component weights up to approximately 1588 kg to avoid injury.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...orrf0370383
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and which fasteners, tools, and equipment are used.
Caterpillar cat 16 m motor grader (prefix r9h) service repair manual (r9h0000...fjsekdmmeed
This document provides disassembly instructions for a 16M motor grader rear axle, differential, and final drive. It lists 50 steps to fully disassemble these components, including removing gears, shafts, seals, housings, and other parts. Various tools are required, and weights of removed parts are provided. Detailed illustrations accompany each step to show how to position the components and which fasteners, seals, or other pieces to remove.
Caterpillar cat 16 m motor grader (prefix r9h) service repair manual (r9h0000...dkdmidkkdk
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It details removing components such as sprockets, bearings, seals, gears, housings, and shafts. Precautions are given to note shim quantities and orders. Tools required include link brackets, sleeves, pullers, bolts, sockets, and presses. Personnel are warned of component weights up to approximately 1588 kg to avoid injury.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...hean57759707
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and noting weights of removed parts. Detailed illustrations accompany each step to show components and tooling placement. Safety notices are included and components are to be kept clean from contaminants to prevent damage.
Similar to Caterpillar Cat 14M3 Motor Grader (Prefix N9S) Service Repair Manual (N9S00001 and up).pdf (16)
This document provides assembly instructions for a piston pump used in a wheeled excavator model M320F. It consists of 50 steps to assemble the various components of the pump in the correct order. The components include springs, retainers, seals, valves, plates, bushings, shafts, and other parts. Precautions are provided for parts that are spring loaded to prevent injury during assembly.
The document provides instructions for disassembling and assembling the final drive carriers, hubs, and brakes of a M320F wheeled excavator. It lists the required tools and gives step-by-step procedures for removing and installing components such as the carrier housing, planetary gears, brake discs, seals, and bearings. Clearances for the brake discs are also specified to ensure proper functioning.
This document provides assembly instructions for an M318 excavator transmission. It lists required tools and parts, and provides step-by-step instructions to assemble the transmission components, including gears, shafts, seals, bearings, and housing. Proper end play is checked at several steps. Lubricants are specified, and cleanliness during assembly is emphasized.
Caterpillar Cat M315 Excavator (Prefix 7ML) Service Repair Manual (7ML00001-0...orrf0370383
This document provides instructions for removing and installing a swing motor and swing drive on an M315 excavator. It describes releasing hydraulic pressure, draining oil, disconnecting hoses, and removing and installing various components like bolts, seals, and motors. Safety precautions are provided regarding containing fluids, releasing pressure, and preventing personal injury. Detailed step-by-step instructions are given for disassembly and reassembly.
The document provides removal and installation instructions for a precooler, water temperature regulator housing, water pump, and other engine components. It includes notices about containing fluids, keeping parts clean, and lists required tools. The step-by-step instructions describe disconnecting hoses and electrical connections, removing mounting bolts and components, and installing parts in reverse order while applying sealant compounds as needed. Illustrations show the component locations and part numbers.
This document provides instructions for installing and removing components of the front gear group of a C18 industrial engine. It describes:
1. Cleaning and inspecting components before installation and removing components in reverse order of installation.
2. Installing the front plate and gears, including adjusting backlash between gears.
3. Lubricating and torquing fasteners to specified values.
This document provides instructions for removing and installing a flywheel housing on a C18 Industrial Engine WJB. It is a 3-page service manual excerpt that describes:
1) Required tools and safety notices
2) Removal procedure which includes supporting the engine, removing bolts and lifting the housing off
3) Installation procedure which includes cleaning, applying sealant, positioning the housing and tightening bolts in a specific sequence and torque.
The document provides instructions for installing an engine oil filter base which includes:
1. Lubricating the O-rings and installing them on the engine oil filter base.
2. Positioning the engine oil filter base and installing bolts to secure it.
3. Reconnecting any disconnected tubes.
The instructions are intended for technicians and include safety warnings for containing fluids and wearing protective equipment when working with pressurized parts.
1) The document provides disassembly and assembly instructions for removing and installing various components of a C18 industrial engine, including the power take-off drive group, vibration damper and pulley, crankshaft front seal, and front cover.
2) The instructions include lists of required tools and detailed step-by-step procedures with accompanying illustrations.
3) Special notes are provided regarding keeping parts clean, inspecting components, and not using lubricants during certain installation procedures.
The document provides instructions for removing and installing various fuel system components on a C18 Industrial Engine, including:
- Removing and installing the fuel priming pump.
- Removing the fuel filter base and disassembling/assembling its components.
- Removing and installing the fuel transfer pump.
- Removing the electronic unit injectors.
The summaries provide concise overviews of the removal and installation procedures for each component in 3 sentences or less.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C18 Industrial Engine, including:
1) Removing and installing the fuel priming pump, fuel filter base, fuel transfer pump, and electronic unit injectors.
2) Disassembling and assembling the fuel filter base to replace seals and fittings.
3) Procedures include disconnecting fuel lines and electrical connections, marking parts for reinstallation, and applying thread lock compounds. Safety notices advise containing fluids and preventing contamination.
This service repair manual provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a Caterpillar C11 industrial engine. The procedures describe using various tools to remove and install components in a specific sequence, and include notices about keeping parts clean and containing fluids.
This document provides instructions for removing and installing various engine components on a Caterpillar C11 Industrial Engine. It describes procedures for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, the engine oil filter base, and the engine oil cooler. The document contains illustrations and lists required tools for each procedure.
This document provides instructions for removing and installing a unit injector, unit injector sleeve, and turbocharger from a C9.3 Industrial Engine. The unit injector removal procedure involves disconnecting electrical and fuel lines, loosening mounting bolts, and extracting the injector. Installation requires cleaning, lubricating seals, and tightening bolts. The sleeve procedure includes draining coolant, cutting threads to remove the old sleeve, cleaning the bore, applying retaining compound to the new sleeve, and installing with a hammer and driver. The turbocharger removal involves disconnecting coolant and air lines and removing mounting nuts. Installation requires applying anti-seize to bolts and tightening clamps and nuts.
This document provides instructions for disassembling and assembling the freewheel stator component of a torque converter. The disassembly process involves using various tools to remove over 30 individual parts in a specific sequence. Cleanliness is emphasized. The assembly process reverses the disassembly steps and provides additional details like proper orientation and torque specifications for reinstalling components.
This document provides instructions for disassembling and assembling the torque converter of a 966H wheel loader. It begins with required tools and safety notices. The disassembly instructions describe removing over 30 individual parts in multiple steps, including the torque converter housing, impeller, stator, carrier shaft, and turbine. The assembly section then lists the components and provides the reverse steps for reassembling the torque converter. Cleanliness is emphasized as important during disassembly and assembly.
This document provides instructions for removing and installing the rear gear group and flywheel on a Caterpillar C11 engine. The removal procedure involves using various tools to remove 12 different components in 11 steps. The installation procedure involves 14 steps of reinstalling components and includes notes about matching dimensions and applying threadlock. Tools, torque specifications, and cautions are provided.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a Caterpillar 962K wheel loader. The disassembly procedure outlines 28 steps to remove components like bolts, valves, spools, springs, and bearings. The assembly procedure describes 34 steps and cautions to install these components in reverse order and ensure proper spring tension, seals, and shaft clearance. Precautions are included to prevent injury from released spring forces.
This document provides instructions for assembling and disassembling parts of a 962K wheel loader. It includes 37 steps to assemble a piston pump, with diagrams showing each step. It also provides procedures for removing and installing a main control valve and electrohydraulic control components, with warnings about releasing pressure before servicing hydraulic systems.
The document provides instructions for removing and installing a secondary steering pump and electric motor on a Caterpillar 962K wheel loader. It outlines 28 steps for disassembly of the pump which includes removing valves, spools, plugs, springs, and other internal components. The assembly section details 34 steps for reinstalling these parts in the reverse order and adjusting axial shaft end play.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 14M3 MOTOR GRADER N9S
Configuration: 14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
14M3 Motor Grader Power Train
Media Number -M0067666-01 Publication Date -01/05/2017 Date Updated -16/05/2017
i06595544
Rear Axle, Differential and Final Drive - Disassemble
SMCS - 3258-015; 3278-015; 3282-015-RE; 4050-015; 4068-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Bracket As 4
B 140-7742 Sleeve 2
C 1U-9200 Lever Puller Hoist 1
D
154-6182 Forcing Bolt 3
154-6360 Forcing Bolt(1)
3
Reaction Plate
1/4 in. Steel
3
E
1D-4601 Bolt 2
4K-0367 Full Nut 2
150-1782 Crossblock 1
5B-0637 High Idle Nut 1
5F-7366 Forcing Screw 1
1P-0520 Driver Gp 1
3H-0465 Push-Puller Plate 2
F 439-3939 Link Bracket As 2
1/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. G
8B-7551 Bearing Puller Gp 1
1P-5546 Crossarm 1
3H-0465 Push-Puller Plate 2
5F-7366 Forcing Screw 1
H 1U-6692 Socket Wrench As 1
J 154-6183 Forcing Bolt 3
K 1U-6405 Three Jaw Puller 1
(1)
154-6360 Forcing Bolt is used for the latest ring gear.
Start By:
a. Remove the rear axle, differential, and final drive.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
Illustration 1 g01351806
1. Use Tooling (A) and two suitable lifting devices to position rear axle, differential, and final
drive (1) onto suitable cribbing. The weight of rear axle, differential, and final drive (1) is
approximately 1588 kg (3500 lb).
2/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g01351767
2. Attach Tooling (B) and a suitable lifting device onto sprocket (2). The weight of sprocket
(2) is approximately 25 kg (55 lb).
3. Remove bolts (3), retainer (4), shims (5), and sprocket (2).
Note: Note the quantity and the order of shims (5).
Illustration 3 g01351809
4. Attach Tooling (B) and a suitable lifting device onto sprocket (6). The weight of sprocket
(6) is approximately 25 kg (55 lb).
5. Remove sprocket (6).
3/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 4 g01351900
6. Remove bearing cone (7).
Illustration 5 g01351906
7. Attach Tooling (A), Tooling (C), and two suitable lifting devices onto final drive housing
(8). The weight of final drive housing (8) is approximately 254 kg (560 lb). Remove nuts
(9).
Illustration 6 g01425110
4/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 7 g01352011
Note: Ensure that the drive shaft and carrier assembly stay in place as final drive housing is
removed. Failure to do so may result in the drive shaft and carrier assembly falling out as
the final drive housing is removed.
8. Remove bolts (9A). Use Tooling (D) to remove final drive housing (8).
Illustration 8 g02727681
9. Remove bolts (10).
Illustration 9 g02380996
5/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 10. Remove plug (10A).
Illustration 10 g02714387
11. Use Tooling (E) to remove retainer (11).
Illustration 11 g01352280
12. Remove shims (12). Use Tooling (A) and a suitable lifting device to remove housing (13).
The weight of housing (13) is approximately 90 kg (198 lb).
Note: Note the quantity and the order of shims (12).
6/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 12 g01352292
13. Remove thrust washer (14). Remove wear sleeves (15).
Illustration 13 g01352299
14. Turn over housing (13). Remove lip seal (16).
Illustration 14 g01352309
15. Remove bearing cup (17). Remove thrust washer (18).
Illustration 15 g01352320
7/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 16. Remove lip seal (19). Remove bearing cup (20).
Illustration 16 g01352324
17. Use Tooling (F) to remove carrier assembly (21) and drive shaft (22). The weight of carrier
assembly (21) and drive shaft (22) is approximately 125 kg (275 lb).
Illustration 17 g01352329
18. Use Tooling (G) to remove bearing cone (23).
Illustration 18 g01352339
19. Remove retaining ring (24) to remove axle shaft (22) from carrier assembly (21).
8/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 19 g01352406
20. Remove bolts (25) and retainer (26). Remove pin (27). Remove gear (28). Remove thrust
washers (29) and bearings (30). Repeat this step for the remaining planetary gears.
Illustration 20 g01352384
21. Remove axle shaft assembly (31).
9/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 21 g01352402
22. Remove retaining ring (32) to remove gear (33) from axle shaft (34).
Illustration 22 g02280615
23. Use Tooling (D) to separate ring gear (35) from the intermediate housing.
Note: If threads on Tooling (D) bottom out before ring gear (35) is removed, use washers as
needed to remove ring gear (35).
Illustration 23 g03681543
Note: Dimension for reaction plate.
a. Fabricate the reaction plate of Tooling (D) from 1/4 in. bar stock.
10/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 24 g01352445
24. Use Tooling (B) and a suitable lifting device to remove ring gear (35). The weight of ring
gear (35) is approximately 45 kg (100 lb).
25. Repeat Step 2 through Step 24 for the opposite side.
Illustration 25 g06039132
26. Position differential housing (36) with intermediate housing (37) upward.
Illustration 26 g06039255
11/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 27. Attach a suitable lifting device onto pinion (38). Use Tooling (J) to separate pinion (38)
from the center housing. Remove bolts (39) to remove pinion (38). The weight of pinion
(38) is approximately 68 kg (150 lb).
Illustration 27 g06039140
28. Remove shims (40). Remove O-ring seal (41).
Note: Note the order and the quantity of shims (40).
Illustration 28 g06039146
29. Remove bolt (42). Remove retainer (43). Remove yoke (44). Remove guard (45).
12/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 29 g06039150
30. Remove shims (46). Remove lip seal (47).
Note: Note the order and the quantity of shims (46).
Illustration 30 g06039157
Illustration 31 g06039258
31. Use a suitable press to remove pinion (48). Remove bearing cone (49). Remove bearing cup
(50). Remove bearing cone (51). Remove bearing cup (52).
Note: Damage to the housing can occur. Do not use the flange to support the housing when
removing the pinion.
13/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 32 g01352447
32. Remove bolts (53).
Illustration 33 g01352847
33. Use Tooling (H) to remove nut assembly (54).
Illustration 34 g01352870
34. Remove bolts (55). Remove bolts (56).
14/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 35 g01352873
35. Use Tooling (J) to separate intermediate housing (37) from differential housing (36).
Illustration 36 g01352886
36. Use Tooling (F) to remove intermediate housing (37). The weight of intermediate housing
(37) is approximately 54 kg (120 lb).
Illustration 37 g01352893
37. Remove shims (57).
15/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 38 g01352898
38. Use Tooling (A) to remove bearing assembly (58) and differential (59). The weight of
bearing assembly (58) and differential (59) is approximately 159 kg (350 lb).
Illustration 39 g01352982
39. Remove bolts (60). Remove shroud (61).
Illustration 40 g02760082
40. Use Tooling (G) to remove bearing assembly (62). Remove bearing cone (63).
16/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 41 g02760116
41. Use Tooling (K) to remove spacer (64) and bearing cone (65).
Note: This step is a destructive procedure.
Illustration 42 g02760138
42. Remove retaining ring (66). Remove bearing race (67). Remove O-ring seals (68). Remove
thrust ring (69).
Illustration 43 g02760140
17/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
43. Remove bolts (70). Remove case (71).
Illustration 44 g02760156
44. Remove thrust washer (72). Remove plates (73) and discs (74). Remove springs (75).
Note: Note the quantity and the order of plates (73) and discs (74).
Illustration 45 g02760160
45. Use two people to remove housing (76). The weight of housing (76) is approximately 23 kg
(50 lb).
18/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 46 g02760163
46. Use two people to remove differential gear (77). The weight of differential gear (77) is
approximately 14 kg (30 lb).
Illustration 47 g02760177
47. Use two people to remove spider assembly (78). The weight of spider assembly (78) is
approximately 14 kg (30 lb).
Illustration 48 g02760216
48. Remove thrust washer (79), pinion gear (80), and bearing sleeve (81) from spider (82).
Repeat this step for the remaining pinion gears (80).
19/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 49 g02760225
49. Remove differential gear (83). Remove thrust washer (84).
Illustration 50 g02761702
50. Turn over housing (85) and bevel gear (86). Remove bolts (87). Use two people to remove
housing (85) from bevel gear (86). The weight of housing (85) is approximately 35 kg
(77 lb). The weight of bevel gear (86) is approximately 24 kg (53 lb).
Illustration 51 g02761705
51. Remove bearing assembly (88). Remove piston (89).
20/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 52 g02761706
52. Remove thrust race (90), thrust bearing (91), and thrust race (92) from piston (89).
Illustration 53 g02761707
53. Remove seals (93) from piston (89).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Dec 13 14:59:46 UTC+0800 2020
21/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 14M3 MOTOR GRADER N9S
Configuration: 14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
14M3 Motor Grader Power Train
Media Number -M0067666-01 Publication Date -01/05/2017 Date Updated -16/05/2017
i06595550
Rear Axle, Differential and Final Drive - Assemble
SMCS - 3258-016; 3278-016; 3282-016-RE; 4050-016; 4068-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Bracket As 4
B 140-7742 Sleeve 2
C 1U-9200 Lever Puller Hoist 1
F 439-3939 Link Bracket As 2
H 1U-6692 Socket Wrench As 1
J 154-6183 Forcing Bolt 2
L - Loctite 243 Threadlocker -
M - Loctite 5127 High Flex Form-In-Place Gasket -
N 6V-2012 Depth Micrometer 1
P
8T-5096 Dial Indicator Gp 1
301-3405 Backlash Gauge 1
R 8T-4140 Bolt 4
S - 3% Molybdenum Grease -
1/27
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals, gaskets, and lip seals. Replace O-ring seals, gaskets, and lip seals
that are worn or damaged.
Note: Lubricate O-ring seals and lip seals with the lubricant that is being sealed.
Illustration 1 g02761707
1. Install seals (93) onto piston (89).
Illustration 2 g02843317
2. Install thrust bearing (91), onto piston (89).
2/27
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 3 g02761705
3. Install piston (89). Lower the temperature of bearing assembly (88). Install bearing
assembly (88).
Illustration 4 g02761702
4. Use two people to install housing (85) onto bevel gear (86). The weight of housing (85) is
approximately 35 kg (77 lb). The weight of bevel gear (86) is approximately 24 kg (53 lb).
Install bolts (87).
Tighten bolts (87) to a torque of 300 ± 40 N·m (221 ± 30 lb ft).
Illustration 5 g02760225
3/27
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. 5. Install thrust washer (84). Install differential gear (83).
Note: Install thrust washer (84) with the groove side against the gear.
Illustration 6 g02760216
6. Install bearing sleeve (81), pinion gear (80), and thrust washer (79) onto spider (82). Repeat
this step for the remaining pinion gears (80).
Illustration 7 g02760177
7. Use two people to install spider assembly (78). The weight of spider assembly (78) is
approximately 14 kg (30 lb).
4/27
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...