This document provides disassembly instructions for the transmission of a 120M Motor Grader. It lists over 30 steps and accompanying illustrations to remove components like the housing, clutch assemblies, seals, sensors and gears. Special tools are required and safety precautions mentioned regarding spring forces. The transmission weighs approximately 862 kg and its removal is the starting point for the disassembly process.
Caterpillar cat 120 m motor grader (prefix r9c) service repair manual (r9c000...fjsekkdmmmse
1. The document provides disassembly instructions for a 120M motor grader transmission. It lists over 50 individual steps to disassemble various transmission components along with required tools.
2. Components that can be disassembled include the transmission housing, clutch assemblies, gear assemblies, pistons, seals, sensors, and other internal parts. Detailed illustrations accompany each step.
3. Special precautions are provided to safely release spring forces and contain fluids during disassembly. Parts are to be cleaned and orientation of components must be noted for reassembly.
Caterpillar cat 120 m motor grader (prefix r9c) service repair manual (r9c000...fjsjjekdkme
This document provides disassembly instructions for the transmission of a 120M motor grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission housing, clutch assemblies, seals, sensors and gears. Detailed notes are provided on tooling required and part orientations to aid reassembly. Safety precautions are highlighted, and fluids and contaminants are to be handled per regulations.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...ze6074xunong
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission housing, clutch assemblies, gears, seals and sensors. Special tools are required and safety precautions mentioned regarding heavy lifting and released spring forces. The transmission contains multiple assemblies that must be disassembled in the proper sequence and orientation tracked for reassembly.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...bvk2980022
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, plates, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...cu393dumen
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, plates, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...f7useijdkdmdm
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the transmission housing, clutch assemblies, gears, seals, pistons, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...ufjskekdjdmw2
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail provides a comprehensive guide to take the transmission apart piece-by-piece.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...fusekddmm3e
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail provides a comprehensive guide to take the transmission apart piece-by-piece.
Caterpillar cat 120 m motor grader (prefix r9c) service repair manual (r9c000...fjsekkdmmmse
1. The document provides disassembly instructions for a 120M motor grader transmission. It lists over 50 individual steps to disassemble various transmission components along with required tools.
2. Components that can be disassembled include the transmission housing, clutch assemblies, gear assemblies, pistons, seals, sensors, and other internal parts. Detailed illustrations accompany each step.
3. Special precautions are provided to safely release spring forces and contain fluids during disassembly. Parts are to be cleaned and orientation of components must be noted for reassembly.
Caterpillar cat 120 m motor grader (prefix r9c) service repair manual (r9c000...fjsjjekdkme
This document provides disassembly instructions for the transmission of a 120M motor grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission housing, clutch assemblies, seals, sensors and gears. Detailed notes are provided on tooling required and part orientations to aid reassembly. Safety precautions are highlighted, and fluids and contaminants are to be handled per regulations.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...ze6074xunong
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission housing, clutch assemblies, gears, seals and sensors. Special tools are required and safety precautions mentioned regarding heavy lifting and released spring forces. The transmission contains multiple assemblies that must be disassembled in the proper sequence and orientation tracked for reassembly.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...bvk2980022
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, plates, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...cu393dumen
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, plates, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...f7useijdkdmdm
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the transmission housing, clutch assemblies, gears, seals, pistons, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...ufjskekdjdmw2
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail provides a comprehensive guide to take the transmission apart piece-by-piece.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...fusekddmm3e
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail provides a comprehensive guide to take the transmission apart piece-by-piece.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...fujskkmdmd
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail provides a comprehensive guide to take the transmission apart piece-by-piece.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...f7usueijdkdmm3e
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components, compressed springs, and containment of fluids.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...fujsekmdd8di
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, pistons, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Care is advised as some components are heavy and others contain stored spring energy.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...gen78guozun
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, plates, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...f8useudjkddmm2
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail provides a comprehensive guide to take the transmission apart piece-by-piece.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...f8usejkdmmd8i
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail, numbering of steps and diagrams provided allow for precise disassembly and reassembly of the transmission.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...jfksemmdm3e
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the transmission housing, clutch assemblies, gears, seals, plates, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...tengtui535
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to disassemble the entire transmission along with required tools. Pictures and diagrams accompany each step to illustrate parts and their orientation. Safety notices are included to warn of potential injuries from parts under spring pressure.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...f8isekdodkdmd
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing housing components, seals, sensors, gears, clutches, and other internal parts. Detailed illustrations accompany each step to show how to position the transmission and which components are being removed. Safety notices are also provided regarding containing fluids, wearing protective equipment, and risks from released spring forces.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...idksmmdmdm
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to disassemble the entire transmission along with required tools. Pictures and diagrams accompany each step to illustrate parts and their orientation. Safety notices are included to warn of potential injuries from heavy parts or released spring forces during disassembly.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...hean57759707
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to disassemble the various transmission components, including removing housing covers, pistons, seals, gears, clutches, and sensors. Detailed illustrations accompany each step. Safety notices are included to warn of heavy component weights and potential for injury from released spring forces.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...jkdkkdsmmd
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps and accompanying illustrations to remove components like clutches, plates, seals, sensors and housing. Special tools are required and safety precautions mentioned regarding spring forces. The transmission weighs approximately 862kg and its removal is the first step in the disassembly process.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...f8seodkdmdmed3
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to disassemble the entire transmission along with required tools. Pictures and diagrams accompany each step to illustrate parts and their orientation. Safety notices are included to warn of potential injuries from parts under spring pressure.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...fuskddmmd
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, pistons, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 120M Motor Grader (Prefix R9C) Service Repair Manual (R9C0000...tuzhiyou2
This document provides instructions for disassembling the transmission of a 120M Motor Grader. It lists over 30 individual steps and required tools to remove components like the transmission, yoke assembly, plates, seals, pistons, housing, sensors, clutch assemblies, gears, and hub assembly. Safety notices are included to handle fluids and released spring forces properly. Detailed illustrations accompany each step.
Caterpillar Cat 120M Motor Grader (Prefix R9C) Service Repair Manual (R9C0000...qfyc504378
This document provides disassembly instructions for the transmission of a 120M Motor Grader. It lists over 50 steps and required tools to fully disassemble the transmission. These include removing housing components, seals, sensors, clutches, gears, and other internal parts. Precautions are given around fluid containment, part identification, and the risk of injury from springs under pressure.
Caterpillar Cat 120M Motor Grader (Prefix R9C) Service Repair Manual (R9C0000...lituo39419496
This document provides disassembly instructions for the transmission of a 120M Motor Grader. It lists over 50 steps and required tools to fully disassemble the transmission. These include removing housing components, seals, sensors, clutches, gears, and other internal parts. Precautions are given around weights of parts, spring forces, and fluid containment. The detailed illustrations and part numbers aid in identifying each component for repair or replacement.
Caterpillar Cat 12M Motor Grader (Prefix R9B) Service Repair Manual (R9B00001...tingrm81805
This document provides disassembly instructions for the transmission of a 12M motor grader. It lists over 30 steps and required tools to fully disassemble the transmission. Key components that are removed include the transmission housing, clutch assemblies, gear assembly, hub assembly and various seals, sensors and plates. Detailed illustrations accompany each step to show how to position the transmission and which fasteners and parts are involved. Safety notices are included to properly handle springs and contain fluids.
Caterpillar Cat 12M Motor Grader (Prefix R9B) Service Repair Manual Instant D...ze6074xunong
This document provides disassembly instructions for the transmission of a 12M motor grader. It lists over 30 steps and required tools to fully disassemble the transmission. Key components that are removed include the transmission housing, clutch assemblies, gear assembly, hub assembly and various seals, sensors and plates. Detailed illustrations accompany each step to show how to position the transmission and which fasteners and parts are involved. Safety notices are included to properly handle springs and contain fluids.
This document provides instructions for removing and installing various engine components on a 246 Skid Steer Loader, including the turbocharger, exhaust manifold, inlet manifold, and inlet and exhaust valve springs. The removal and installation procedures describe loosening clamps, removing bolts, plugging openings to prevent contamination, cleaning surfaces, and installing new gaskets. Tools required are also listed.
CASE IH STX450 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides instructions for removing and installing an engine. It is a multi-step process that involves disconnecting various electrical and mechanical components like batteries, wiring harnesses, hoses, and mounts. Safety precautions are emphasized throughout. Key steps include draining fluids, removing accessories, disconnecting wiring, and using overhead lifting equipment to maneuver the heavy engine component out of and back into the tractor.
CASE IH STX440 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides instructions for removing and installing an engine. It is a multi-step process that begins by preparing the machine, disconnecting electrical and fluid connections, removing ancillary components, and then lifting the engine out of the machine. The installation process reverses these steps, carefully positioning and securing the engine before reconnecting all electrical and fluid lines. Safety is emphasized throughout with warnings about proper lifting equipment and blocking the machine securely.
More Related Content
Similar to Caterpillar Cat 120M Motor Grader (Prefix R9C) Service Repair Manual (R9C00001 and up).pdf
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...fujskkmdmd
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail provides a comprehensive guide to take the transmission apart piece-by-piece.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...f7usueijdkdmm3e
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components, compressed springs, and containment of fluids.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...fujsekmdd8di
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, pistons, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Care is advised as some components are heavy and others contain stored spring energy.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...gen78guozun
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, plates, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...f8useudjkddmm2
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail provides a comprehensive guide to take the transmission apart piece-by-piece.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...f8usejkdmmd8i
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, housing, seals, plates, sensors, clutches and gears. Special tools are required and safety precautions mentioned regarding heavy components that need to be lifted and springs that store force. The level of detail, numbering of steps and diagrams provided allow for precise disassembly and reassembly of the transmission.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...jfksemmdm3e
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the transmission housing, clutch assemblies, gears, seals, plates, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...tengtui535
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to disassemble the entire transmission along with required tools. Pictures and diagrams accompany each step to illustrate parts and their orientation. Safety notices are included to warn of potential injuries from parts under spring pressure.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...f8isekdodkdmd
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing housing components, seals, sensors, gears, clutches, and other internal parts. Detailed illustrations accompany each step to show how to position the transmission and which components are being removed. Safety notices are also provided regarding containing fluids, wearing protective equipment, and risks from released spring forces.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...idksmmdmdm
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to disassemble the entire transmission along with required tools. Pictures and diagrams accompany each step to illustrate parts and their orientation. Safety notices are included to warn of potential injuries from heavy parts or released spring forces during disassembly.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...hean57759707
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to disassemble the various transmission components, including removing housing covers, pistons, seals, gears, clutches, and sensors. Detailed illustrations accompany each step. Safety notices are included to warn of heavy component weights and potential for injury from released spring forces.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...jkdkkdsmmd
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps and accompanying illustrations to remove components like clutches, plates, seals, sensors and housing. Special tools are required and safety precautions mentioned regarding spring forces. The transmission weighs approximately 862kg and its removal is the first step in the disassembly process.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual Instant ...f8seodkdmdmed3
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to disassemble the entire transmission along with required tools. Pictures and diagrams accompany each step to illustrate parts and their orientation. Safety notices are included to warn of potential injuries from parts under spring pressure.
Caterpillar Cat 160M Motor Grader (Prefix D9T) Service Repair Manual (D9T0000...fuskddmmd
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, pistons, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Precautions are mentioned regarding fluid containment and releasing spring forces when disassembling parts.
Caterpillar Cat 120M Motor Grader (Prefix R9C) Service Repair Manual (R9C0000...tuzhiyou2
This document provides instructions for disassembling the transmission of a 120M Motor Grader. It lists over 30 individual steps and required tools to remove components like the transmission, yoke assembly, plates, seals, pistons, housing, sensors, clutch assemblies, gears, and hub assembly. Safety notices are included to handle fluids and released spring forces properly. Detailed illustrations accompany each step.
Caterpillar Cat 120M Motor Grader (Prefix R9C) Service Repair Manual (R9C0000...qfyc504378
This document provides disassembly instructions for the transmission of a 120M Motor Grader. It lists over 50 steps and required tools to fully disassemble the transmission. These include removing housing components, seals, sensors, clutches, gears, and other internal parts. Precautions are given around fluid containment, part identification, and the risk of injury from springs under pressure.
Caterpillar Cat 120M Motor Grader (Prefix R9C) Service Repair Manual (R9C0000...lituo39419496
This document provides disassembly instructions for the transmission of a 120M Motor Grader. It lists over 50 steps and required tools to fully disassemble the transmission. These include removing housing components, seals, sensors, clutches, gears, and other internal parts. Precautions are given around weights of parts, spring forces, and fluid containment. The detailed illustrations and part numbers aid in identifying each component for repair or replacement.
Caterpillar Cat 12M Motor Grader (Prefix R9B) Service Repair Manual (R9B00001...tingrm81805
This document provides disassembly instructions for the transmission of a 12M motor grader. It lists over 30 steps and required tools to fully disassemble the transmission. Key components that are removed include the transmission housing, clutch assemblies, gear assembly, hub assembly and various seals, sensors and plates. Detailed illustrations accompany each step to show how to position the transmission and which fasteners and parts are involved. Safety notices are included to properly handle springs and contain fluids.
Caterpillar Cat 12M Motor Grader (Prefix R9B) Service Repair Manual Instant D...ze6074xunong
This document provides disassembly instructions for the transmission of a 12M motor grader. It lists over 30 steps and required tools to fully disassemble the transmission. Key components that are removed include the transmission housing, clutch assemblies, gear assembly, hub assembly and various seals, sensors and plates. Detailed illustrations accompany each step to show how to position the transmission and which fasteners and parts are involved. Safety notices are included to properly handle springs and contain fluids.
Similar to Caterpillar Cat 120M Motor Grader (Prefix R9C) Service Repair Manual (R9C00001 and up).pdf (19)
This document provides instructions for removing and installing various engine components on a 246 Skid Steer Loader, including the turbocharger, exhaust manifold, inlet manifold, and inlet and exhaust valve springs. The removal and installation procedures describe loosening clamps, removing bolts, plugging openings to prevent contamination, cleaning surfaces, and installing new gaskets. Tools required are also listed.
CASE IH STX450 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides instructions for removing and installing an engine. It is a multi-step process that involves disconnecting various electrical and mechanical components like batteries, wiring harnesses, hoses, and mounts. Safety precautions are emphasized throughout. Key steps include draining fluids, removing accessories, disconnecting wiring, and using overhead lifting equipment to maneuver the heavy engine component out of and back into the tractor.
CASE IH STX440 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides instructions for removing and installing an engine. It is a multi-step process that begins by preparing the machine, disconnecting electrical and fluid connections, removing ancillary components, and then lifting the engine out of the machine. The installation process reverses these steps, carefully positioning and securing the engine before reconnecting all electrical and fluid lines. Safety is emphasized throughout with warnings about proper lifting equipment and blocking the machine securely.
CASE IH STX375 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides step-by-step instructions for removing an engine from a tractor. It lists 27 steps including draining fluids, disconnecting wiring harnesses, removing hoses, and detaching mounting hardware. The instructions cover disconnecting batteries, removing the radiator, hood, fuel lines, air intake components, and other parts to fully separate the engine from the tractor.
CASE IH STX325 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides step-by-step instructions for removing an engine from a tractor. It lists 27 steps including draining fluids, disconnecting wiring harnesses, removing hoses, and detaching mounting hardware. The goal is to fully separate the engine from other tractor components to allow for its removal from the vehicle. Safety precautions are outlined at the beginning regarding parking the tractor, relieving pressures, and disconnecting the battery.
CASE IH STX275 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides instructions for removing and installing an engine. It is a multi-step process that begins by preparing the machine, disconnecting electrical and fluid connections, removing ancillary components, and then lifting the engine out of the machine. The installation process reverses these steps, carefully positioning and securing the engine before reconnecting all electrical and fluid lines. Safety is emphasized throughout with warnings about proper lifting equipment and blocking the machine securely.
CASE IH Steiger 620 Tier 4B (final) Tractor Service Repair Manual.pdfufjskekdjdmw2
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. The manual provides maintenance and repair information for technicians.
The document provides instructions for removing and installing the engine oil pump on a 242B2 Skid Steer Loader with a 3024C engine. The removal procedure involves removing the front housing, idler gear components, suction pipe, and idler hub. The installation procedure outlines installing the idler hub, gears, rotor, cover, and suction pipe and includes checking end play clearance. Safety notices are provided throughout regarding contained fluids, cleanliness, and spring loaded components.
This document provides instructions for disassembling and assembling the swing and track motors of a 245 Excavator model. It describes in detail removing over 30 individual parts including the swing motor, track motors, pump head, body, barrel, pistons, drive plate and various seals and bearings. Reassembly involves cleaning all parts, applying oil, pressing in bearing cups and cones, installing inserts, joint assembly and other parts in reverse order of disassembly. Precise identification of parts locations and temperatures are required.
Caterpillar Cat 320C L 320CL Excavator (Prefix GLA) Service Repair Manual (G...ufjskekdjdmw2
The document provides instructions for disassembling a swing drive. Key steps include:
1. Removing retaining rings, gears, bearings, washers, and other internal components from the carrier assembly and housing.
2. Using tools like retaining ring pliers and drivers to remove pins and seals.
3. Pressing out components like the shaft, bearings, and spacer from the housing.
The process involves dismantling the entire swing drive assembly into its individual parts for inspection or replacement of worn components. Cleanliness is emphasized to prevent contamination of parts.
This document provides instructions for removing and installing exhaust manifolds, inlet and exhaust valves, and inlet and exhaust valve springs on Caterpillar 249D compact track loaders. The procedures describe using various tools to compress springs, remove bolts and nuts, and install new gaskets. Safety notices are included to warn technicians to keep parts clean, plug openings, and wear protective equipment when working with compressed springs.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...ufjskekdjdmw2
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
This document provides instructions for installing the cylinder head on a 4-cylinder engine:
1. Thoroughly clean the cylinder head and cylinder block mating surfaces.
2. Inspect the cylinder head for distortion and replace if out of specification.
3. Install guide bolts through the cylinder block and install the new cylinder head gasket, ensuring dowel pins are correctly positioned.
This document provides instructions for removing and installing a fuel injection pump on a 246D Skid Steer Loader powered by a C3.3B engine. The procedure involves disconnecting fuel lines, removing mounting nuts and bolts, and carefully withdrawing the pump. New gasket shims and bolts are installed when reinstalling the pump. Cleanliness of all fuel system components is emphasized.
This document provides instructions for servicing components of a 246D Skid Steer Loader powered by a C3.3B engine. It includes procedures for removing and installing the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures note required tools and torque specifications and include illustrations showing the components and repair steps. Safety notices are also provided regarding keeping components clean and containing fluids.
This document provides instructions for removing and installing a piston pump on a 246D Skid Steer Loader. It outlines the required tools and gives step-by-step procedures with illustrations. To remove the pump, hoses and harnesses must be disconnected, then lifting tools are used to support the pump while bolts are removed. For installation, the process is reversed. Disassembly of the pump involves removing valves, coils, cartridges and seals. Assembly requires installing these components in reverse order while applying thread lock compound in some areas.
This document provides instructions for removing and installing the automatic timing advance and fuel injection pump housing & governor on a 245D Excavator with a 3406C diesel engine. It describes in detail the steps to take the components off the engine, including removing mounting bolts, nuts, hoses and other fasteners. The instructions note to cap or plug any openings immediately to prevent contamination. They also warn to use caution when removing certain parts like springs.
Caterpillar Cat 245B SERIES II EXCAVATOR (Prefix 6MF) Service Repair Manual (...ufjskekdjdmw2
This document provides instructions for disassembling and assembling starting motors for a 245B Series II excavator. It describes removing components like the rear housing, brush holder, pinion drive housing, and shift lever housing. Tools needed are listed. Detailed photos show each step, such as lifting brush springs, removing retaining rings, and cleaning parts with mineral spirits. Instructions are provided for both 42-MT and 37-MT/41-MT style starting motors.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...ufjskekdjdmw2
This document provides instructions for servicing components of a 245 Excavator engine, including:
- Disassembling and reassembling the fuel injection pump housing, which involves removing pumps, gears, and bearings, and reinstalling them in the proper order and position.
- Removing and installing the inlet manifold, which connects to the cylinder head and air cleaner components.
- Removing the aftercooler unit, which cools engine air after turbocharging, by disconnecting hoses and removing housing covers, elbows, and the core component.
This document provides instructions for disassembling and assembling the swing drive of a 245 Excavator model. It describes removing and installing over 40 individual parts in multiple steps. Key parts that must be removed include the swing drive motor, brake, various oil lines and tubes, bearings, gears, and casing components. Proper cleaning and application of anti-seize compound to specific areas is emphasized. Torque specifications and special tools are referenced throughout the process.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120M MOTOR GRADER R9C
Configuration: 120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
12M and 120M Motor Graders Power Train
Media Number -KENR6419-08 Publication Date -01/05/2017 Date Updated -15/05/2017
i07077362
Transmission - Disassemble
SMCS - 3030-015; 3159-015; 3176-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 3
B 422-8733 Jack Stand Gp 3
C 1U-9202 Lever Puller Hoist 1
D 1P-1863 Retaining Ring Pliers 1
E 308-3470 Jack Stand Gp 2
F 140-7742 Sleeve 1
G 154-6181 Forcing Bolt 2
H FT-2769 Table 1
J 4C-8156 Lifting Fixture 1
K
1U-6410 Three Jaw Puller 1
1P-0510 Driver Gp 1
L 9U-7480 Compressing Tube 1
5P-7970 Nut 1
8T-4224 Hard Washer 1
- 1
1/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY ...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Bolt
M8 - 1.25 by 460mm
M 8B-7548 Push-Puller Tool Gp 1
N 2P-8312 Retaining Ring Pliers 1
P
1P-2321 Combination Puller 1
1P-0510 Driver Gp 1
R
189-0408 Shackle As 1
3E-3882 Eyebolt 1
S
126-7175 Push-Puller Tool Gp 1
4C-5653 Threaded Adapter 1
1P-0510 Driver Gp 1
Start By:
a. Remove the transmission.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all harness assemblies for installation purposes.
2/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY ...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 1 g01386565
1. Attach Tooling (A) and a suitable lifting device to transmission (1). The weight of
transmission (1) is approximately 862 kg (1900 lb). Use Tooling (A) and the suitable lifting
device to position transmission (1) onto Tooling (B). Remove hose assembly (2).
Illustration 2 g01386568
2. Remove bolts (3) to remove control module (4) and spacers (5).
3/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY ...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 3 g01386574
3. Remove yoke assembly (6).
Illustration 4 g01386575
4. Remove retaining ring (7).
5. Remove cup (8). Remove O-ring seal (9).
Illustration 5 g01386579
6. Attach Tooling (A), Tooling (C), and a suitable lifting device to transmission (1). Use
Tooling (A), Tooling (C), and the suitable lifting device to position transmission (1) onto
Tooling (B) and suitable cribbing. Position transmission (1) with the output shaft upward.
4/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY ...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 6 g01386585
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
7. Remove bolts (10) to remove plate assembly (11).
Illustration 7 g01386589
8. Remove lip seal (12).
5/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY ...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 8 g01386599
9. Use Tooling (D) to remove retaining ring (13). Remove coned disc springs (14).
Note: Note the orientation of coned disc springs (14) for assembly purposes.
Illustration 9 g01386610
10. Remove O-ring seal (15) and piston (16).
6/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY ...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 10 g01386621
11. Remove piston seal (17). Remove piston seal (18).
Illustration 11 g01386624
12. Disconnect harness assembly (19) and harness assembly (21). Remove guard (20).
Illustration 12 g01386632
13. Remove bolts (22). Use two people to remove housing (23). The weight of housing (23) is
approximately 20 kg (45 lb).
7/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY ...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 13 g01386646
14. Remove pressure sensor (24) and the O-ring seal. Remove solenoid (25).
Illustration 14 g01386658
15. Remove O-ring seal (26), O-ring seal (27), O-ring seal (28), O-ring seal (29), and O-ring
seal (30).
Illustration 15 g01386662
16. Remove seal (31).
Illustration 16 g01386663
8/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY ...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. 17. Remove friction discs (32) and clutch plates (33).
Note: Note the quantity and the order of friction discs (32) and clutch plates (33) for
assembly purposes.
18. Remove O-ring seals (34) and dowels (35).
Illustration 17 g01386675
19. Remove retaining ring (36). Remove hub (37).
Illustration 18 g01386684
20. Attach Tooling (A), Tooling (C), Tooling F, and a suitable lifting device to transmission (1).
Use Tooling (A), Tooling (C), Tooling (F), and the suitable lifting device to position
transmission (1) onto Tooling (B) and Tooling (E) with the output shaft downward. The
weight of transmission (1) is approximately 862 kg (1900 lb).
9/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY ...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 19 g01386730
21. Remove bolt (38) to remove speed sensor (39) and guard (40).
Illustration 20 g01386747
22. Remove bolts (41) to remove speed sensor (42) and speed sensor (43).
Illustration 21 g01386749
23. Remove cover (44).
10/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 22 g01386757
24. Remove bolts (45) to remove speed sensor (46) and speed sensor (47).
Illustration 23 g01386764
25. Attach Tooling (A), Tooling (C), and a suitable lifting device to housing (49). The weight of
housing (49) is approximately 136 kg (300 lb). Remove bolts (48).
26. Use Tooling (A), Tooling (C), and the suitable lifting device to remove housing (49).
Note: If necessary, use Tooling (G) to assist in removal of housing (49).
Illustration 24 g01386792
11/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. 27. Remove O-ring seal (50). Remove bolts (51) and the locks. Remove tube assembly (52) and
the O-ring seal.
Illustration 25 g01386795
28. Remove bolts (53) to remove seal carrier (54). Remove bolts (55) to remove seal carrier
(56).
Illustration 26 g01386797
29. Remove seal rings (57). Remove O-ring seals (58). Repeat this step for the remaining seal
carrier.
Illustration 27 g01386811
12/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 28 g01386815
30. Use Tooling (J) and a suitable lifting device to remove clutch assembly (59) and clutch
assembly (60). The combined weight of clutch assembly (59) and clutch assembly (60) is
approximately 163 kg (360 lb).
31. Position clutch assembly (59) and clutch assembly (60) onto Tooling (H). If necessary,
support clutch assembly (60) with suitable cribbing.
32. Remove Tooling (J) to separate clutch assembly (59) from clutch assembly (60).
Illustration 29 g01386827
33. Use Tooling (K) to remove bearing (61) and rotor (62) from clutch assembly (59).
Note: Be sure to attach Tooling (K) to gear assembly (63) to prevent damage to rotor (62).
13/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 30 g01386841
34. Remove thrust washer (64) and gear assembly (63).
Note: Note the orientation of thrust washer (64) for assembly purposes.
Illustration 31 g01386992
35. Remove bearing sleeves (65) from gear assembly (63).
Illustration 32 g01386993
36. Remove thrust washer (66).
14/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Note: Note the orientation of thrust washer (66) for assembly purposes.
Illustration 33 g01386997
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
37. Use Tooling (L) to compress hub assembly (67). Remove lock rings (68) and two half rings
(69) (not shown).
Note: Note the orientation of lock rings (68) and two ring halves (69) for assembly
purposes.
Illustration 34 g01387088
15/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. 38. Remove hub assembly (67), friction discs (70), and clutch plates (71).
Note: Note the order of friction discs (70) and clutch plates (71) for assembly purposes.
Illustration 35 g01387093
39. Remove wave spring (72) and piston (73).
Illustration 36 g01387119
40. Remove seal rings (74) and (75) from piston (73).
Illustration 37 g01387137
16/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. 41. Use a suitable lifting device to turn over clutch assembly (59). The weight of clutch
assembly (59) is approximately 59 kg (130 lb).
Illustration 38 g01387150
Illustration 39 g01387221
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
42. Use Tooling (M) to remove bearing (76). Remove thrust washer (77), thrust disc (78), and
gear assembly (79).
Note: Note the orientation of thrust disc (78) for assembly purposes.
17/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 40 g01387228
43. Remove thrust disc (80), washer (81), half rings (82), and lock rings (83).
Note: Note the orientation of thrust disc (80) for assembly purposes.
Illustration 41 g01387232
44. Remove hub assembly (84). Remove friction discs (85) and clutch plates (86).
Note: Note the orientation of friction discs (85) and clutch plates (86) for assembly
purposes.
18/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 42 g01387235
45. Use Tooling (N) to remove retaining ring (87).
46. Remove balance piston (88). Remove seal ring (89) from balance piston (88).
47. Remove springs (90).
48. Remove piston (91). Remove seal rings (92) and (93) from piston (91).
Illustration 43 g01387511
49. Use Tooling (K) to remove inner bearing (94) from clutch assembly (60). Remove thrust
disc (95) and gear (96).
Note: Note the orientation of thrust disc (95) for assembly purposes.
Illustration 44 g01387520
50. Remove thrust disc (97) and gear assembly (98) from clutch assembly (60).
Note: Note the orientation of thrust disc (97) for assembly purposes.
19/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 45 g01387526
51. Remove sleeve bearing (99) from gear assembly (98).
Illustration 46 g01387528
52. Remove thrust disc (100) and washer (101) from clutch assembly (60).
Note: Note the orientation of thrust disc (100) for assembly purposes.
Illustration 47 g01387541
20/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
53. Use Tooling (L) to compress hub assembly (102). Remove lock rings (103) and two half
rings (104) (not shown).
Note: Note the orientation of lock rings (103) and two ring halves (104) for assembly
purposes.
Illustration 48 g01387556
54. Remove hub assembly (102), friction discs (105), and clutch plates (106) from clutch
assembly (60).
Note: Note the orientation of friction discs (105) and clutch plates (106) for assembly
purposes.
21/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 49 g01387573
55. Remove wave spring (107) and piston (108) from clutch assembly (60).
Illustration 50 g01387580
56. Remove seal rings (109) and (110) from piston (108).
Illustration 51 g01387592
57. Use a suitable lifting device to turn over clutch assembly (60) onto Tooling (H). The weight
of clutch assembly (60) is approximately 54 kg (120 lb).
22/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Illustration 52 g01387595
58. Use Tooling (P) to remove inner bearing (111), thrust disc (112), and gear (113) from clutch
assembly (60).
Note: Note the orientation of thrust disc (112) for assembly purposes.
Illustration 53 g01387755
59. Remove thrust disc (114) and gear assembly (115).
Note: Note the orientation of thrust disc (114) for assembly purposes.
23/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 54 g01387765
60. Remove bearing (116) from gear assembly (115).
Illustration 55 g01387820
61. Remove thrust disc (117) and washer (118).
Note: Note the orientation of thrust disc (117) for assembly purposes.
Illustration 56 g01387824
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
24/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. 62. Use Tooling (L) to compress hub assembly (119). Remove lock rings (120) and two half
rings (121) (not shown).
Note: Note the orientation of lock rings (120) and two ring halves (121) for assembly
purposes.
Illustration 57 g01387846
63. Remove hub assembly (119), friction discs (122), and clutch plates (123).
Note: Note the orientation of friction discs (122) and clutch plates (123) for assembly
purposes.
Illustration 58 g01387852
64. Remove wave spring (124) and piston (125).
25/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. Illustration 59 g01387858
65. Remove seal rings (126) and (127) from piston (125).
Illustration 60 g01387876
66. Use Tooling (P) to remove inner bearing (128) and gear (129) from input shaft assembly
(130). This is necessary at this time so that you can remove the remaining two clutch
assemblies.
Illustration 61 g01387884
67. Remove bolts (131) to remove seal carrier (132).
26/45
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED B...
2020/5/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...