The document provides instructions for removing the engine from an excavator by removing components connected to the engine like hoses, wires, and shields. Specific components that must be removed include the radiator hoses, fuel lines, battery cables, and other connecting parts. Safety precautions are noted such as draining fluids before removing components and capping open ports to prevent contamination.
Case cx470 b crawler excavator service repair manualjfjkskekemm
This document is the service manual for the CX470B Crawler Excavator. It contains information on removing and installing various components of the excavator as well as specifications, troubleshooting procedures, and diagrams. The manual is divided into sections covering the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upper structure. Safety precautions and general information are provided at the beginning along with torque specifications for fasteners.
CASE IH JX60 TRACTOR Service Repair Manualhksemd yjekmd
This is the Highly Detailed factory service repair manual for theCASE IH JX60 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE IH JX60 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Gearbox
Drive Lines
Front Axle Mechanical Transmission
Rear Axle and Transmission
Power Take-Off
Braking System
Hydraulic System
Steering
Front Axle and Wheels
Auxiliary Units
Electrical System
Body Work and Drive Position
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE IH JX60 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Claas scorpion 7040 (402 03) telehandler service repair manualufjjdjkksekmd
This document contains repair and maintenance information for Scorpion telehandlers models 9040, 7045, 7040, 7030, and 6030, including:
1. An overview of machine components, applications, and legal operation regulations.
2. Specifications for the frame, engine, drive system, hydraulics, electrical system, dimensions, payload capacities, and performance data.
3. Maintenance instructions and schedules for engine systems, cooling systems, filters, belts, gearboxes, axles, and hydraulics, as well as safety procedures and required fluids.
Claas scorpion 9040 k05 telehandler service repair manualudfjjjskekmdm
This document contains repair and maintenance information for Scorpion telehandlers models 9040, 7045, 7040, 7030, and 6030, including:
1. An overview of machine components, applications, and legal operation regulations.
2. Specifications for the frame, engine, drive system, hydraulics, electrical system, dimensions, payload capacities, and performance data.
3. Maintenance instructions and schedules for fluids, filters, belts, gearboxes, axles, and hydraulic systems. Safety procedures and part replacement steps are provided.
Case cx210 b forestry machine crawler excavator service repair manualfjjskekksemmm
This document provides information on safety, general maintenance procedures, and standard torque specifications for a crawler excavator service manual. It outlines cleaning and inspection procedures, notes the importance of safety, and includes a table listing standard torque values for cap screws and nuts. Safety messages are marked throughout the document to draw attention to risks of serious injury.
Case cx240 b crawler excavator service repair manualfjjskekksemmm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, machine dimensions, engine specifications, hydraulic system details, and component weights. Torque values are given for common fasteners like cap screws and nuts. Safety and maintenance guidelines are also presented.
Case cx230 b crawler excavator service repair manualfjjskekksemmm
This document provides information on safety, general maintenance procedures, and standard torque specifications for a crawler excavator service manual. It outlines cleaning and inspection procedures, notes the importance of safety, and includes a table listing the standard torque values for various cap screws and nuts. Safety messages in the document should be carefully read to avoid risk of serious injury.
Case cx210 b crawler excavator service repair manualfjjskekksemmm
This document provides information on safety, general maintenance procedures, and standard torque specifications for a crawler excavator service manual. It outlines cleaning and inspection procedures, notes the importance of safety, and includes a table with standard torque values for cap screws and nuts. Safety messages are marked throughout the document to draw attention to risks of serious injury.
Case cx470 b crawler excavator service repair manualjfjkskekemm
This document is the service manual for the CX470B Crawler Excavator. It contains information on removing and installing various components of the excavator as well as specifications, troubleshooting procedures, and diagrams. The manual is divided into sections covering the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upper structure. Safety precautions and general information are provided at the beginning along with torque specifications for fasteners.
CASE IH JX60 TRACTOR Service Repair Manualhksemd yjekmd
This is the Highly Detailed factory service repair manual for theCASE IH JX60 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE IH JX60 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Gearbox
Drive Lines
Front Axle Mechanical Transmission
Rear Axle and Transmission
Power Take-Off
Braking System
Hydraulic System
Steering
Front Axle and Wheels
Auxiliary Units
Electrical System
Body Work and Drive Position
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE IH JX60 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Claas scorpion 7040 (402 03) telehandler service repair manualufjjdjkksekmd
This document contains repair and maintenance information for Scorpion telehandlers models 9040, 7045, 7040, 7030, and 6030, including:
1. An overview of machine components, applications, and legal operation regulations.
2. Specifications for the frame, engine, drive system, hydraulics, electrical system, dimensions, payload capacities, and performance data.
3. Maintenance instructions and schedules for engine systems, cooling systems, filters, belts, gearboxes, axles, and hydraulics, as well as safety procedures and required fluids.
Claas scorpion 9040 k05 telehandler service repair manualudfjjjskekmdm
This document contains repair and maintenance information for Scorpion telehandlers models 9040, 7045, 7040, 7030, and 6030, including:
1. An overview of machine components, applications, and legal operation regulations.
2. Specifications for the frame, engine, drive system, hydraulics, electrical system, dimensions, payload capacities, and performance data.
3. Maintenance instructions and schedules for fluids, filters, belts, gearboxes, axles, and hydraulic systems. Safety procedures and part replacement steps are provided.
Case cx210 b forestry machine crawler excavator service repair manualfjjskekksemmm
This document provides information on safety, general maintenance procedures, and standard torque specifications for a crawler excavator service manual. It outlines cleaning and inspection procedures, notes the importance of safety, and includes a table listing standard torque values for cap screws and nuts. Safety messages are marked throughout the document to draw attention to risks of serious injury.
Case cx240 b crawler excavator service repair manualfjjskekksemmm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, machine dimensions, engine specifications, hydraulic system details, and component weights. Torque values are given for common fasteners like cap screws and nuts. Safety and maintenance guidelines are also presented.
Case cx230 b crawler excavator service repair manualfjjskekksemmm
This document provides information on safety, general maintenance procedures, and standard torque specifications for a crawler excavator service manual. It outlines cleaning and inspection procedures, notes the importance of safety, and includes a table listing the standard torque values for various cap screws and nuts. Safety messages in the document should be carefully read to avoid risk of serious injury.
Case cx210 b crawler excavator service repair manualfjjskekksemmm
This document provides information on safety, general maintenance procedures, and standard torque specifications for a crawler excavator service manual. It outlines cleaning and inspection procedures, notes the importance of safety, and includes a table with standard torque values for cap screws and nuts. Safety messages are marked throughout the document to draw attention to risks of serious injury.
Case cx240 b crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx210 b forestry machine crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx230 b crawler excavator service repair manualyfhjsjefkksemme
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for common fasteners.
Case cx210 b forestry machine crawler excavator service repair manualfsjefjskekmm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for common fasteners.
Case cx210 b crawler excavator service repair manualdfujsjefjkskemm
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx230 b crawler excavator service repair manualfsjefjskekmm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for cap screws and nuts.
Case cx210 b forestry machine crawler excavator service repair manualyfhjsjefkksemme
This document provides specifications and torque settings for an excavator model. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for cap screws and nuts.
Case cx210 b crawler excavator service repair manualufjsekksmemm
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts to ensure proper tightening during reassembly. Safety is emphasized throughout maintenance and repair work.
Case cx240 b crawler excavator service repair manualdfujsjefjkskemm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for cap screws and nuts.
Case cx210 b crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any parts that are worn or damaged. Technicians are instructed to inspect bearings for easy rotation and replace any bearings that are rough or damaged. Standard torque values are provided for cap screws and nuts used in maintenance and repairs.
Case cx230 b crawler excavator service repair manualfujjsefkskemme
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are provided for common fasteners.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdffujkskemdmd
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX370C Tier 4 Crawler Excavator Service Repair Manual Instant Download.pdfpugangjia7703
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdfcub93808097
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdff8usjekdmdm
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX370C Tier 4 Crawler Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdff8usejdkdmmd1
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdff8usejdkkddme3
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX370C Tier 4 Crawler Excavator Service Repair Manual.pdffujsekdmmdm
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
Komatsu pc200 lc 3 crawler excavator parts catalogue manual - sn 20001 and upfujsjefkkkemme
This document provides parts information for a PC200LC-3 excavator with serial numbers 20001 and up. It includes 380 line items grouped into 10 categories: Engine Related Parts and Electrical System, Travel and Final Drive, Undercarriage, Swing and Control System, Revolving Frame and Cab, Work Equipment Control System, Work Equipment, Optional Parts, Special Application Parts, and Mark Plate/Tool and Kit. Each line item lists the part name, number, and applicable serial number range.
Komatsu pc138 us 2 crawler excavator parts catalogue manual - sn 4501 and upfujsjefkkkemme
This document provides parts information for a PC138US-2 excavator with serial numbers 4501 and up for overseas versions. It includes a parts list and part numbers for the engine and its related parts, cooling system, and other systems. The parts are organized by category and subcategories with references to other documents providing more detailed part specifications and diagrams.
More Related Content
Similar to Case cx130 b forestry machine crawler excavator service repair manual
Case cx240 b crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx210 b forestry machine crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx230 b crawler excavator service repair manualyfhjsjefkksemme
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for common fasteners.
Case cx210 b forestry machine crawler excavator service repair manualfsjefjskekmm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for common fasteners.
Case cx210 b crawler excavator service repair manualdfujsjefjkskemm
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx230 b crawler excavator service repair manualfsjefjskekmm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for cap screws and nuts.
Case cx210 b forestry machine crawler excavator service repair manualyfhjsjefkksemme
This document provides specifications and torque settings for an excavator model. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for cap screws and nuts.
Case cx210 b crawler excavator service repair manualufjsekksmemm
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts to ensure proper tightening during reassembly. Safety is emphasized throughout maintenance and repair work.
Case cx240 b crawler excavator service repair manualdfujsjefjkskemm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for cap screws and nuts.
Case cx210 b crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any parts that are worn or damaged. Technicians are instructed to inspect bearings for easy rotation and replace any bearings that are rough or damaged. Standard torque values are provided for cap screws and nuts used in maintenance and repairs.
Case cx230 b crawler excavator service repair manualfujjsefkskemme
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are provided for common fasteners.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdffujkskemdmd
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX370C Tier 4 Crawler Excavator Service Repair Manual Instant Download.pdfpugangjia7703
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdfcub93808097
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdff8usjekdmdm
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX370C Tier 4 Crawler Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdff8usejdkdmmd1
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX350C Tier 4 Crawler Excavator Service Repair Manual 1.pdff8usejdkkddme3
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
CASE CX370C Tier 4 Crawler Excavator Service Repair Manual.pdffujsekdmmdm
This document is a service manual that provides instructions for maintenance and repair of CX350C-CX370C tier 4 crawler excavators. It contains sections covering the engine, fuel system, electrical system, undercarriage, and other components. Specifications, diagrams, troubleshooting guides, and lists of replacement parts are included to assist technicians with repairs.
Similar to Case cx130 b forestry machine crawler excavator service repair manual (20)
Komatsu pc200 lc 3 crawler excavator parts catalogue manual - sn 20001 and upfujsjefkkkemme
This document provides parts information for a PC200LC-3 excavator with serial numbers 20001 and up. It includes 380 line items grouped into 10 categories: Engine Related Parts and Electrical System, Travel and Final Drive, Undercarriage, Swing and Control System, Revolving Frame and Cab, Work Equipment Control System, Work Equipment, Optional Parts, Special Application Parts, and Mark Plate/Tool and Kit. Each line item lists the part name, number, and applicable serial number range.
Komatsu pc138 us 2 crawler excavator parts catalogue manual - sn 4501 and upfujsjefkkkemme
This document provides parts information for a PC138US-2 excavator with serial numbers 4501 and up for overseas versions. It includes a parts list and part numbers for the engine and its related parts, cooling system, and other systems. The parts are organized by category and subcategories with references to other documents providing more detailed part specifications and diagrams.
Komatsu pc138 us 2 crawler excavator parts catalogue manual - sn 1001 and upfujsjefkkkemme
This document provides parts information for a Komatsu PC138US-2 excavator with serial numbers 1001 and up. It includes sections covering the engine and related parts, cooling system, fuel tank, electrical system, hydraulics, frames, operator controls, guards, undercarriage, work equipment, markings and plates, accessories, special products, and service kits. The document lists part numbers, descriptions, quantities and applicable serial number ranges for each component.
Komatsu hm350 1 articulated dump truck parts catalogue manual - sn 1001 and upfujsjefkkkemme
This document provides parts information for an HM350-1 excavator with serial numbers 1001 and up. It includes a list of major systems and subsystems with 3-digit codes for easy part identification (e.g. B0150 refers to the air conditioning system). For each part, the document provides the part number, name, quantity, and applicable serial number range. The level of detail in the parts listings provides a complete resource for technicians to identify replacement components for this excavator model.
Komatsu hm300 3 articulated dump truck parts catalogue manual - sn 3001 and upfujsjefkkkemme
This document provides parts information for an HM300-3 excavator with serial numbers 3001 and up. It includes sections for the engine, cooling system, fuel system, electrical system, and other components. The cooling system section lists units for the radiator, aftercooler, coolant piping, brake oil cooler, and brake oil cooler piping. Parts are identified by index number, part number, description, and quantity. Diagrams and part numbers are provided for individual components.
Case cx490 c crawler excavators std version (tier 3) turkish market service...fujsjefkkkemme
This service manual section provides specifications for the Isuzu 6UZ1 diesel engine, including its cooling system, lubrication system, and electrical system. The engine is an inline 6-cylinder overhead cam design with a displacement of 9.839 liters. Maximum output is 270 kW at 2000 RPM with maximum torque of 1435 Nm at 1500 RPM. Coolant capacity is 22.5 liters and oil capacity ranges from 30-41 liters. The generator is a 24V/50A unit and the starter is a 24V/5.5kW unit designed to crank the engine at over 3100 RPM.
Case cx250 d long reach crawler excavator service repair manualfujsjefkkkemme
This document is the service manual for CX250D Crawler excavators. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper tools and procedures. Liability is disclaimed for damages caused by unapproved parts or improper servicing.
Case cx160 d lc version tier 4b (final) crawler excavator service repair manualfujsjefkkkemme
This service manual section provides specifications and descriptions for the engine on a Case CX160D excavator. It details the engine components and systems, including the electronic control system, cylinder block, piston, cylinder head, crankshaft, EGR system, fuel system, cooling system, electrical system, and preheat system. Identification information and maintenance instructions are also provided.
Case cx160 b crawler excavator service repair manualfujsjefkkkemme
This document provides a service manual table of contents for a crawler excavator. It lists 9 sections covering general information, the engine, fuel system, electrical system, undercarriage, drive train, undercarriage hydraulics, upperstructure hydraulics, upperstructure, and includes large size hydraulic and electrical schematics. Safety topics and standard torque specifications are also included in section 1. The document provides part numbers and references for removal, installation, disassembly and assembly procedures for various components of the excavator.
Case cx130 d standard with blade version tier 4b (final) crawler excavator se...fujsjefkkkemme
This document is a service manual that contains information for servicing and repairing CX130D crawler excavators. It includes sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper instructions and tools, and unauthorized repairs will void any warranty.
Case cx80 tier 3 crawler excavator service repair manualfujsjefkkkemme
This document is the service manual for the Crawler Excavator CX75SR/CX80 Tier 3. It contains information on safety, general specifications, removal and installation instructions for components, and disassembly/assembly instructions. The manual is divided into sections covering the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more. Schematics and specifications are referenced but not included.
Case cx75 sr tier 3 crawler excavator service repair manualfujsjefkkkemme
This document is the service manual for the Crawler Excavator CX75SR/CX80 Tier 3. It contains information on safety, general specifications, removal and installation instructions for components, and disassembly/assembly instructions. The manual is divided into sections covering the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more. Schematics and specifications are provided for repairs and maintenance. Safety warnings are included throughout to prevent injury during service.
This document contains instructions for removing and installing an engine from a Case 9010 excavator. It describes disconnecting hoses, wires, and other components to separate the engine from the machine. It also provides details on installing the engine, including bleeding air from the cooling system. The torque specifications for reinstalling components like engine mounts and hydraulic pump mounting bolts are referenced.
Case 2050 m tier 4a (interim) crawler dozer service repair manual (pin nedc20...fujsjefkkkemme
This document is the service manual for the 2050M Tier 4A crawler dozer. It provides part numbers and replacement information for engine systems, hydraulic systems, tracks, frames, electrical systems, and other components. The manual instructs technicians to only perform repairs as specified and using the proper tools and safety precautions.
Case 2050 m stage iiib crawler dozer service repair manual (pin ngc109000 and...fujsjefkkkemme
This document is a service manual for CNH Industrial's 2050M Crawler Dozer covering various models and engine configurations. It contains over 150 sections organized by technical system covering all aspects of servicing and repairing the dozer. The manual provides detailed instructions, specifications, component locations, and troubleshooting information to qualified service technicians. Safety precautions are included to prevent injury when working on the machine.
Case 2050 m stage iiib crawler dozer service repair manual (pin nedc20000 and...fujsjefkkkemme
This document is a service manual for CNH Industrial 2050M crawler dozers with Stage IIIB engines. It provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, frames, tracks, cab climate control, electrical systems, and other components. The manual includes detailed sections on the engine and crankcase, fuel system, air intake system, turbocharger, cooling system, lubrication system, pumps, motors, brakes, hydraulic valves and cylinders, tracks and suspensions, heating, ventilation, electrical harnesses, starters, alternators, batteries, gauges, and cab controls.
Case 2050 m crawler dozer service repair manualfujsjefkkkemme
This document is a service manual for a 2050M crawler dozer that contains sections on the engine, rear axle system, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and the platform, cab, bodywork, and decals. The introduction section outlines safety rules and signal word definitions for personal safety during operation and service of the machine.
Case 1850 k tier 3 crawler dozer service repair manualfujsjefkkkemme
This document is a service manual for a 1850K Crawler Dozer that contains important safety information and identifies key components. It provides warnings about performing unauthorized repairs and using unapproved parts. The summary lists safety symbols used in the manual and directs the reader to carefully follow all safety instructions to avoid risks and protect their health and safety. It also provides an overview of the manual's contents, which includes sections on the engine, transmission, brakes, undercarriage, dozing equipment, and electrical and hydraulic systems.
Case 1650 m tier 4a (interim) crawler dozer service repair manual (pin nfdc16...fujsjefkkkemme
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 47907868. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when operating or servicing the machine.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
3. Issued 06-15
DIVISION/SECTION SECTION N°
8 UPPERSTRUCTURE HYDRAULICS
Depressurising and decontaminating the hydraulic system, use of the
vacuum pump and bleeding the components..........................................................................................8000
Specifications, troubleshooting, checks and
hydraulic pressure settings......................................................................................................................8001
Removal and installation of the hydraulic reservoir .....................................................................................8002
Removal and installation of the main hydraulic pump..................................................................................8003
Removal and installation of the main hydraulic control valve.......................................................................8004
Removal and installation of the attachment cylinders..................................................................................8005
Removal and installation of the hydraulic swivel..........................................................................................8006
Removal and installation of the pilot blocs....................................................................................................8007
Disassembly and assembly of the main hydraulic pump .............................................................................8010
Disassembly and assembly of the main hydraulic control valve ..................................................................8011
Disassembly and assembly of the attachment cylinders .............................................................................8012
Disassembly and assembly of the hand control levers ................................................................................8013
Disassembly and assembly of the foot control levers ..................................................................................8014
Disassembly and assembly of the cushion valve.........................................................................................8016
Removal and installation of the safety valve................................................................................................8017
Disassembly and assembly of the swing motor ...........................................................................................8019
Hydraulic functions ......................................................................................................................................8020
Hydraulic component functions....................................................................................................................8030
9 UPPERSTRUCTURE
Removal and installation of the counterweight ............................................................................................9002
Removal and installation of the boom, dipper and bucket ...........................................................................9003
Removal and installation of the seat.............................................................................................................9004
Removal and installation of the cab and cab equipment .............................................................................9005
Air conditioner functions and troubleshooting..............................................................................................9006
Air conditioning unit .....................................................................................................................................9007
Air conditioning components........................................................................................................................9009
Large size hydraulic schematics............................................................................................................... Pocket
Large size hydraulic schematics (2PC)..................................................................................................... Pocket
Large size electrical schematics................................................................................................................ Pocket
NOTE: CNH Industrial reserves the right to make changes in the specification
and design of the machine without prior notice and without incurring any obliga-
tion to modify units previously sold.
The description of the models shown in this manual has been made in accord-
ance with the technical specifications known as of the date of design of this
document.
Specifications, troubleshooting, checks and
hydraulic pressure settings (Forestry Machine).......................................................................................8001
Disassembly and assembly of the main hydraulic pump (Forestry Machine)...............................................8010
Disassembly and assembly of the attachment cylinders (Forestry Machine)...............................................8012
Hydraulic functions (Forestry Machine)........................................................................................................8020
Hydraulic component functions (Forestry Machine).....................................................................................8030
5. 1001-3
Lep 7-27691EN Issued 02-06
GENERAL INFORMATION
Cleanning
Clean all metal parts except bearings, in a suitable
cleaning solvent or by steam cleaning. Do not use
caustic soda for steam cleaning. After cleaning, dry
and put oil on all parts. Clean oil passages with
compressed air. Clean bearings in a suitable cleaning
solvent, dry the bearings completely and put oil on
the bearings.
Inspection
Check all parts when the parts are disassembled.
Replace all parts that have wear or damage. Small
scoring or grooves can be removed with a hone or
crocus cloth. Complete a visual inspection for
indications of wear, pitting and the replacement of
parts necessary to prevent early failures.
Bearings
Check bearings for easy action. If bearings have a
loose fit or rough action replace the bearing. Wash
bearings with a suitable cleaning solvent and permit
to air dry. DO NOT DRY BEARINGS WITH
COMPRESSED AIR.
Needle bearings
Before you press needle bearings in a bore always
remove any metal protrusions in the bore or edge of
the bore. Before you press bearings into position put
petroleum jelly on the inside and outside diameter of
the bearings.
Gears
Check all gears for wear and damage. Replace gears
that have wear or damage.
Oil seals, O-rings and gaskets
Always install new oil seals, O-rings and gaskets. Put
petroleum jelly on seals and O-rings.
Shafts
Check all shafts that have wear or damage. Check
the bearing and oil seal surfaces of the shafts for
damage.
Service parts
Always install genuine Case service parts. When
ordering refer to the Parts Catalog for the correct part
number of the genuine Case replacement items.
Failures due to the use of other than genuine Case
replacement parts are not covered by warranty.
Lubrication
Only use the oils and lubricants specified in the
Operator’s or Service Manuals. Failures due to the
use of non-specified oils and lubricants are not
covered by warranty.
6. 1001-4
Lep 7-27691EN Issued 02-06
SAFETY
This symbol means ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED. The message that follows the
symbol contains important information about safety. Carefully
read the message. Make sure you fully understand the
causes of possible injury or death.
!
To prevent injury always follow the Warning, Caution
and Danger notes in this section and throughout the
manual.
Put the warning tag shown below on the key for the
keyswitch when servicing or repairing the machine.
One warning tag is supplied with each machine.
Additional tags Part Number 331-4614 are available
from your service parts supplier
.
WARNING: Read the operator’s manual to
familiarize yourself with the correct control
functions.
!
WARNING: Operate the machine and
equipment controls from the seat position
only. Any other method could result in
serious injury.
!
WARNING: This is a one man machine, no
riders allowed.!
WARNING: Before starting engine, study
Operator’s Manual safety messages. Read
all safety signs on machine. Clear the area of
other persons. Learn and practice safe use
of controls before operating.
It is your responsibility to understand and
follow manufacturers instructions on
machine operation, service and to observe
pertinent laws and regulations. Operator’s
and Service Manuals may be obtained from
your Case dealer.
!
WARNING: If you wear clothing that is too
loose or do not use the correct safety
equipment for your job, you can be injured.
Always wear clothing that will not catch on
objects. Extra safety equipment that can be
required includes hard hat, safety shoes, ear
protection, eye or face protection, heavy
gloves and reflector clothing.
!
WARNING: When working in the area of the
fan belt with the engine running, avoid loose
clothing if possible, and use extreme caution.
!
WARNING: When doing checks and tests
on the equipment hydraulics, follow the
procedures as they are written. DO NOT
change the procedure.
!
WARNING: When putting the hydraulic
cylinders on this machine through the
necessary cycles to check operation or to
remove air from a circuit, make sure all
people are out of the way.
!
7. 1001-5
Lep 7-27691EN Issued 02-06
WARNING: Use insulated gloves or mittens
when working with hot parts.!
WARNING: Lower all attachments to the
ground or use stands to safely support the
attachments before you do any maintenance
or service.
!
WARNING: Pin sized and smaller streams
of hydraulic oil under pressure can penetrate
the skin and result in serious infection. If
hydraulic oil under pressure does penetrate
the skin, seek medical treatment
immediately. Maintain all hoses and tubes in
good condition. Make sure all connections
are tight. Make a replacement of any tube or
hose that is damaged or thought to be
damaged. DO NOT use your hand to check
for leaks, use a piece of cardboard or wood.
!
WARNING: When removing hardened pins
such as a pivot pin, or a hardened shaft, use
a soft head (brass or bronze) hammer or use
a driver made from brass or bronze and a
steel head hammer.
!
WARNING: When using a hammer to
remove and install pivot pins or separate
parts using compressed air or using a
grinder, wear eye protection that completely
encloses the eyes (approved goggles or
other approved eye protectors).
!
WARNING: Use suitable floor (service)
jacks or chain hoist to raise wheels or tracks
off the floor. Always block machine in place
with suitable safety stands.
!
WARNING: When servicing or repairing the
machine, keep the shop floor and operator’s
compartment and steps free of oil, water,
grease, tools, etc. Use an oil absorbing
material and/or shop cloths as required. Use
safe practices at all times.
!
WARNING: Some components of this
machine are very heavy. Use suitable lifting
equipment or additional help as instructed in
this Service Manual.
!
WARNING: Engine exhaust fumes can
cause death. If it is necessary to start the
engine in a closed place, remove the exhaust
fumes from the area with an exhaust pipe
extension. Open the doors and get outside
air into the area.
!
WARNING: When the battery electrolyte is
frozen, the battery can explode if (1), you try
to charge the battery, or (2), you try to jump
start and run the engine. To prevent the
battery electrolyte from freezing, try to keep
the battery at full charge. If you do not follow
these instructions, you or others in the area
can be injured.
!
9. Lep SM130B2000-0EN Issued 03-08
2000-3
REMOVAL AND INSTALLATION OF THE ENGINE ASSEMBLY
1 Removal of the engine
[1] Remove the counterweight.
(For details, see "Removal and Installation of Coun-
terweight")
[2] Remove the pump.
(For details, see "Removal and Installation of
Pump")
[3] Disassemble the retaining screws (1) and (2), and
then remove the fan shroud (3).
Caution:
Keep away from fire.
Be sure to release hydraulic pressure before beginning work.
The air conditioner circuit is filled with high-pressure gas, so there is the danger of
gas splaying out when loosening lines.
Do not use open flames and do not allow sparks near the battery.
Caution:
Be sure to stop the engine before beginning work.
Be sure to inspect the wire rope and other lifting equipment before beginning work.
Do not stand or pass under the suspended load.
10. Lep SM130B2000-0EN Issued 03-08
2000-4
[4] Disassemble the retaining screws (1), and then
remove the fan guard (2).
[5] Loosen the hoseband (1), and then remove the
upper hose (2) from the radiator.
[6] Loosen the hoseband (3), and then remove the
lower hose (4) from the radiator.
• Use caps to cover the radiator and hoses and pre-
vent the entry of water, dust or dirt.
• Before removing the radiator hoses, completely
drain the coolant.
[7] Loosen the adjusting bolts (1) on the pipe, and then
remove the 2 pipes (2) and (3) from the compressor.
• Always remove the low-pressure pipe (2) first.
• Attach caps or plugs to the compressor and pipes to
prevent any entry of water, dust or dirt.
RF11001-007
1
1
2
1
2
3
4
NF11002-008
12 3
11. Lep SM130B2000-0EN Issued 03-08
2000-5
[8] Loosen the hoseband (1) on the inter cooler, and
then remove the hose (2).
• Use caps to cover the pipe and hose and prevent
the entry of water, dust or dirt
[9] Remove the hosebands (1) in the three locations.
[10]Insert inside the breather hose (1) that is on the
outside.
NF11002-009
2
1
NF11002-010
1
NF11002-011
1
12. Lep SM130B2000-0EN Issued 03-08
2000-6
[11]Prepare a waste oil can (1). As the engine oil hose
will be removed, first drain the engine oil.
[12]Remove the hoses (1).
• Mark the engine and hoses so that the connectors
match at the time of assembly.
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
• Clean the engine and hoses by spraying with a parts
cleaner to prevent scratches and prevent dirt from
accumulating on the connectors.
[13]Remove the bolt (1), and then remove the battery
cable (2) on the negative side.
• When removing the terminal and harness, secure
them so that do not interfere with the frame.
Also, cover with a rubber cap to protect against
sparks.
NF11002-012
1
NF11002-013
1
NF11002-014
1
2
13. Lep SM130B2000-0EN Issued 03-08
2000-7
[14]Remove the nut (1), and then remove the wire (2)
from the starter motor.
[15]Remove the jump-start protector (3), remove the
nut (1), and then remove the wire (2) from the
starter motor.
[16]Remove the hose stopper (1), and then remove the
fuel hose (2).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
[17]Remove the hose stopper (1), and then remove the
fuel hose (2).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
1
2 NF11002-015
1
3
2
NF11002-016
NF11002-017
1
2
NF11002-018
2
1
14. Lep SM130B2000-0EN Issued 03-08
2000-8
[18]Disassemble the retaining screws (1), and then
remove the box cover (2).
[19]Remove the connectors (1) in the box.
• After tying the connectors together, put them in a
plastic bag.
[20]Loosen the hoseband (1), and then remove the
heater hose (2).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
[21]Loosen the hoseband (1), and then remove the
heater hose (2).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
NF11002-019
2
1
1
NF11002-020
NF11002-021
1
2
NF11002-022
1
2
15. Lep SM130B2000-0EN Issued 03-08
2000-9
[22]Loosen the hoseband (1), and then remove the
radiator hose (2).
• Use caps to cover the line and hose and prevent the
entry of water, dust or dirt.
[23]Loosen the hoseband (1), and then remove the air
hose (2).
• Use caps to cover the line and hose and prevent the
entry of water, dust or dirt.
[24]Loosen the hoseband (1), and then remove the air
hose (2).
• Use caps to cover the line and hose and prevent the
entry of water, dust or dirt.
[25]Remove the connector (1) from the alternator.
NF11002-023
1
2
NF11002-024
2
1
NF11002-025
2
1
NF11002-026
1
16. Lep SM130B2000-0EN Issued 03-08
2000-10
[26]Remove the nut (1), and then remove the wires (2)
from the alternator.
[27]Remove the bolt (1), and then remove the breather
hose clamp (2).
[28]Connect the 2 shackles (1), and then use the wires
and crane to secure the engine.
NF11002-027
2
1
NF11002-029
1
2
NF11002-030
1
1
17. Lep SM130B2000-0EN Issued 03-08
2000-11
[29]Disassemble the retaining screws (1) from the
mount.
[30]Use the wires and crane to lift the engine.
[31]Thoroughly check that the location is safe before
lowering the engine on wood planks, etc.
NF11002-031
1
1
1
1
NF11002-032
18. Lep SM130B2000-0EN Issued 03-08
2000-12
2 Installation of the engine
[1] To install the engine, perform the reverse of the removal procedure.
After installing the engine, resupply coolant and engine oil, perform fuel line air bleeding, and perform filling for the
air conditioner gas.
For details, see the individual explanations for each procedure.
[2] Run the engine at no-load idling and check for any water or oil leaks.
[3] Attach the hydraulic pump, covers, and counterweight.
For details, see the individual explanations for each procedure.
19. Lep SM130B2001-0EN Issued 03-08
2001-3
REMOVAL AND INSTALLATION OF FUEL COOLER
1 Removal of fuel cooler
[1] Mark the fuel cooler and hoses so that the connec-
tors match at the time of assembly.
Loosen the hosebands (3) and (4), and then remove
the hoses (1) and (2).
• Attach caps or plugs to the fuel cooler and hoses to
prevent any entry of water, dust or dirt.
[2] Disassemble the retaining screws (1), and then
remove the fuel cooler unit (2).
2 Installation the fuel cooler
Perform the reverse of the removal procedure.
• After connecting the hoses, carefully check for any fuel leaks.
Caution:
Be sure to stop the engine before beginning work.
As the fuel hose will be removed, strictly prohibit open flames.
NF11002-060
1 3
2 4
NF11002-061
1
2
20. Lep SM130B2001-0EN Issued 03-08
2001-4
REMOVAL AND INSTALLATION OF INTER COOLER
1 Removal of inter cooler
[1] Remove the fuel cooler.
(For details, see "Removal and Installation of Fuel
Cooler")
[2] Loosen the bolts (1), and then remove the cover (2).
[3] Loosen the hosebands (1) in the two locations, and
then remove the hoses (2).
[4] Loosen the hosebands (1) in the two locations, and
then remove the hoses (2).
Caution:
Be sure to stop the engine before beginning work.
As the fuel hose will be removed, strictly prohibit open flames.
1
2
NF11002-066
1
2
NF11002-067
1
2
NF11002-068
21. Lep SM130B2001-0EN Issued 03-08
2001-5
[5] Remove the bolt (1).
[6] Attach a wire to the top section of the inter cooler
using a shackle, and lift the inter cooler to remove it.
2 Installation of inter cooler
Perform the reverse of the removal procedure.
Check for any air leaks.
1
NF11002-069
NF11002-070
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. Lep SM130B2001-0EN Issued 03-08
2001-6
REMOVAL AND INSTALLATION OF RADIATOR
1 Removal of radiator
[1] Disassemble the retaining screws (1), and then
remove the under cover (2).
[2] Install the drain hose (1), and then prepare the drain
tank (2).
[3] To make it easier to drain the coolant, remove the
radiator cap (1).
Caution:
Do not remove the radiator cap when the radiator coolant temperature is high. Hot
liquid could spray out.
Caution:
Be sure to release hydraulic pressure before beginning work.
Be sure to stop the engine before beginning work.
Be sure to inspect the wire rope and other lifting equipment before beginning work.
Do not stand or pass under the suspended load.
NM13002-001
1
2
NM13002-002
1
2
NM13002-003
1
24. Lep SM130B2001-0EN Issued 03-08
2001-7
[4] Loosen the drain plug (1), and then drain the cool-
ant.
[5] Loosen the hoseband (1), and then remove the
hose (2).
• Use caps to cover the pipe and hose and prevent
the entry of water, dust or dirt.
[6] Remove the bolts (1), and then remove the cover
(2).
NM13002-004
1
NM13002-005
2
1
NM13002-006
2
1
25. Lep SM130B2001-0EN Issued 03-08
2001-8
[7] Disassemble the retaining screws (1) from the radia-
tor cover.
[8] Loosen the hoseband (1), and then remove the
upper hose (2) from the radiator.
Loosen the hoseband (3), and then remove the
lower hose (4) from the radiator.
• Use caps to cover the radiator and hoses and pre-
vent the entry of water, dust or dirt.
[9] Remove the drain plug (1), Loosen the hoseband
(2), and then remove the hose (3).
NM13002-0071
NM13002-008
1
2
4
3
NM13002-009
1
3
2
26. Lep SM130B2001-0EN Issued 03-08
2001-9
[10]Loosen the hoseband (1), and then remove the
hose (2) from the radiator cap.
• Attach caps or plugs to the hoses to prevent any
entry of water, dust or dirt.
[11]Turn up the rubber band on the fan.
[12]Loosen the hosebands (1) and (2), and then
remove the hoses (3) from the bracket (4).
• Use caps to cover the hoses and pipes and prevent
the entry of water, dust or dirt.
NM13002-010
21
NM13002-011
1
NM13002-012
3
3
4
2
1
27. Lep SM130B2001-0EN Issued 03-08
2001-10
[13]Remove the connector (1) from the sensor.
[14]Disassemble the retaining screws (1), (2) and (3),
and then remove the fan shroud (4).
[15]Disassemble the retaining screws (1) and (2) from
the fan guard, and then move the fan guard towards
the engine.
NM13002-013
1
NM13002-017
1
NM13002-018
2
3
4
NM13002-019
3
1
3
2