This document provides a service manual table of contents for a crawler excavator. It lists 9 sections covering general information, the engine, fuel system, electrical system, undercarriage, drive train, undercarriage hydraulics, upperstructure hydraulics, upperstructure, and includes large size hydraulic and electrical schematics. Safety topics and standard torque specifications are also included in section 1. The document provides part numbers and references for removal, installation, disassembly and assembly procedures for various components of the excavator.
Case cx160 b crawler excavator service repair manualufjjjsefkskem
This document provides a service manual table of contents for a crawler excavator. It lists 9 sections covering general information, the engine, fuel system, electrical system, undercarriage, drive train, undercarriage hydraulics, upperstructure hydraulics, upperstructure, and includes large size hydraulic and electrical schematics. Safety topics, cleaning and inspection guidelines, and standard torque specifications are also included in section 1. The document provides an overview of the manual's organization and contents to aid technicians in servicing the excavator.
Case cx370 b crawler excavator service repair manualfujsjefkskemm
1. Drain engine oil and coolant from radiator. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove upper and lower radiator hoses. Loosen line bolts and remove lines from compressor.
4. Remove bolts and lift engine using suitable lifting equipment. Inspect lifting equipment before lifting. Install in reverse order.
Case cx210 b forestry machine crawler excavator service repair manualfsjefjskekmm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for common fasteners.
Case 1188 crawler excavator service repair manualfsjefjskekmm
The document provides instructions for removing and installing an engine on an excavator. Key steps include:
1. Disconnecting the battery and allowing the engine to cool.
2. Removing access panels, exhaust components, and side panels.
3. Disconnecting electrical components like sensors and solenoids.
4. Removing hoses and disconnecting wiring before detaching the engine.
Case cx500 c tier iii crawler excavator service repair manualfsjefjskekmm
The document is a service manual section that provides specifications for the CX490C and CX500C excavator engine. It includes detailed specifications for the engine, cooling system, lubrication system, electrical system, starter, glow plug, and special tools. The engine is a Tier 3 compliant Isuzu 6UZ1 diesel with a displacement of 9.839L and maximum output of 270kW at 2000 RPM.
Case cx700 b crawler excavator service repair manualjfjkskekemm
Drain the coolant and remove the engine hood, alternator belt, pump, steps, frame, under cover, radiator hoses, compressor lines, intercooler hose, and engine oil remote hoses. Prepare to drain the engine oil. Disconnect all wiring, hoses and lines connected to the engine. Use lifting equipment such as an overhead crane to remove the engine from the machine.
Komatsu d375 a 6r dozer bulldozer service repair manual sn 65001 and upufsiekdolskek
This document provides information on a Bulldozer model D375A-6R, including its specifications, components, systems, and maintenance instructions. It contains sections on the engine and cooling system, power train, undercarriage, hydraulic system, work equipment, and cab. Tables of contents list the subsections for each system, such as the cooling fan pump, transmission, hydraulic tank, cylinder stay, and cab mount.
Case cx470 b crawler excavator service repair manualeudskkejedmm
This document provides specifications and maintenance requirements for a Crawler Excavator CX470B, including:
- Machine and engine serial numbers and year of manufacture
- Recommended fluids and lubricants for hydraulic systems, transmissions, grease, engine oil, fuel, and coolant
- Specifications for main dimensions, engine details, cooling system capacities, and air conditioning
- Maintenance schedules for hydraulic oil filters and fuel filters
Case cx160 b crawler excavator service repair manualufjjjsefkskem
This document provides a service manual table of contents for a crawler excavator. It lists 9 sections covering general information, the engine, fuel system, electrical system, undercarriage, drive train, undercarriage hydraulics, upperstructure hydraulics, upperstructure, and includes large size hydraulic and electrical schematics. Safety topics, cleaning and inspection guidelines, and standard torque specifications are also included in section 1. The document provides an overview of the manual's organization and contents to aid technicians in servicing the excavator.
Case cx370 b crawler excavator service repair manualfujsjefkskemm
1. Drain engine oil and coolant from radiator. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove upper and lower radiator hoses. Loosen line bolts and remove lines from compressor.
4. Remove bolts and lift engine using suitable lifting equipment. Inspect lifting equipment before lifting. Install in reverse order.
Case cx210 b forestry machine crawler excavator service repair manualfsjefjskekmm
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are listed for common fasteners.
Case 1188 crawler excavator service repair manualfsjefjskekmm
The document provides instructions for removing and installing an engine on an excavator. Key steps include:
1. Disconnecting the battery and allowing the engine to cool.
2. Removing access panels, exhaust components, and side panels.
3. Disconnecting electrical components like sensors and solenoids.
4. Removing hoses and disconnecting wiring before detaching the engine.
Case cx500 c tier iii crawler excavator service repair manualfsjefjskekmm
The document is a service manual section that provides specifications for the CX490C and CX500C excavator engine. It includes detailed specifications for the engine, cooling system, lubrication system, electrical system, starter, glow plug, and special tools. The engine is a Tier 3 compliant Isuzu 6UZ1 diesel with a displacement of 9.839L and maximum output of 270kW at 2000 RPM.
Case cx700 b crawler excavator service repair manualjfjkskekemm
Drain the coolant and remove the engine hood, alternator belt, pump, steps, frame, under cover, radiator hoses, compressor lines, intercooler hose, and engine oil remote hoses. Prepare to drain the engine oil. Disconnect all wiring, hoses and lines connected to the engine. Use lifting equipment such as an overhead crane to remove the engine from the machine.
Komatsu d375 a 6r dozer bulldozer service repair manual sn 65001 and upufsiekdolskek
This document provides information on a Bulldozer model D375A-6R, including its specifications, components, systems, and maintenance instructions. It contains sections on the engine and cooling system, power train, undercarriage, hydraulic system, work equipment, and cab. Tables of contents list the subsections for each system, such as the cooling fan pump, transmission, hydraulic tank, cylinder stay, and cab mount.
Case cx470 b crawler excavator service repair manualeudskkejedmm
This document provides specifications and maintenance requirements for a Crawler Excavator CX470B, including:
- Machine and engine serial numbers and year of manufacture
- Recommended fluids and lubricants for hydraulic systems, transmissions, grease, engine oil, fuel, and coolant
- Specifications for main dimensions, engine details, cooling system capacities, and air conditioning
- Maintenance schedules for hydraulic oil filters and fuel filters
Komatsu D375A-5E0 Dozer Bulldozer Service Repair Manual S/N 50001 and uphdksemmme
This is the Highly Detailed factory service repair manual for theKOMATSU D375A-5E0 DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D375A-5E0 DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Index and Foreword
Specification
Structure, Function and Maintenance Standard
Standard Value Table
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Diagrams and Drawings
+++++Field Assembly Instruction
Manual Covers:
Specifications
Precautions for Field Assembly
Disposal of Removed Parts
Assembly Procedure, Necessary Equipment, and Schedule
Layout of Kit
Style for Transportation
Table of Tools for Field Assembly
Tightening Torque
Coating Materials List
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D375A-5E0 DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Case cx130 crawler excavator service repair manual instant downloadufdjjskekfkskem
This document provides safety, general information and standard torque specifications for CNH excavators. It outlines cleaning and inspection procedures for parts and contains warnings about safety precautions that must be followed to prevent injury. Standard torque values are provided for cap screws and nuts used on CNH excavators.
Case cx800 crawler excavator service repair manual instant downloaduuufjjsjekkem
This document provides specifications and torque settings for a Case CX800 Crawler Excavator, including:
1. The type, serial number, and year of manufacture for the machine and engine.
2. Details on hydraulic fluids, oils, fuels, and other consumables used in the machine.
3. Technical specifications for the engine, electrical system, hydraulic system, undercarriage, and attachments.
4. Dimensions and wear limits for tracks, rollers, and attachment joints.
5. Special torque settings for fasteners on the machine.
Case cx800 crawler excavator service repair manualfjjskekskem
This document provides specifications and dimensions for a Case excavator. It includes:
1. Serial numbers and year of manufacture for the machine and engine.
2. Lists of recommended fluids including hydraulic fluid, transmission oil, greases, engine oil, fuel, and antifreeze.
3. Specifications for the engine, capacities, electrical and hydraulic systems, cylinders, controls, undercarriage, and attachments.
4. Dimensional limits and wear specifications for track components and attachment joints.
5. A table of special torque settings and an overall machine dimension diagram. Safety warnings are also provided.
Case cx290 b crawler excavator service repair manualfujsjefkskemm
This document provides the table of contents for a service manual for a CX290B crawler excavator. It lists 9 divisions that cover topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more. Safety information, general repair instructions, and torque specifications are provided in section 1001. The manual contains information to guide technicians in repairs, maintenance, and inspections of the excavator's various components.
New holland l140 skid steer loader service repair manual instant downloadyhfhjjsenneer
This document contains a repair manual for New Holland skid steer loaders models L140 and L150, including cab upgrade machines. It provides technical information and instructions for properly servicing and maintaining the machines. Safety precautions are outlined, including proper support of the machine and boom during repairs. Specifications, dimensions, and diagrams are also included.
New holland l150 skid steer loader service repair manual instant downloadyhfhjjsenneer
This document contains a repair manual for New Holland skid steer loaders models L140 and L150, including cab upgrade machines. It provides technical information and instructions for properly servicing and maintaining the machines. Safety precautions are outlined, including proper support of the machine and boom during repairs. Specifications, dimensions, and diagrams are also included.
McCormick MC100 Tractor Service Repair Manualfjkskejksem
This is the Highly Detailed factory service repair manual for theMCCORMICK MC100 TRACTOR , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MCCORMICK MC100 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Fuel System
Electrical
Steering
Transmission
Brakes
Hydraulic
Chassis and Mounted Equipment
Controller Systems
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMCCORMICK MC100 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Case cx350 b crawler excavator service repair manualfjskekxswesemm
The engine can be removed from the excavator by following these steps:
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove mounting bracket.
3. Remove fan guard and fan guide rubber. Disconnect radiator hoses.
4. Disconnect compressor lines and remove mounting bolts. Use plugs to cover openings.
5. The engine can then be lifted out after disconnecting all mounting points and fluid lines. Take precautions when lifting heavy components.
Case cx370 b crawler excavator service repair manualfjskekxswesemm
This document provides service information for crawler excavators CX350B and CX370B, including:
- Safety guidelines and standard torque specifications for nuts and bolts.
- A table of contents listing the sections and reference numbers for the service manual covering topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more.
- Instructions on cleaning, inspection, and installation of bearings during disassembly and reassembly of components.
CASE CX370B Crawler Excavator Service Repair Manual.pdffujkskemdmd
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual Instant Download.pdfpugangjia7703
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing excavators. It instructs technicians to clean all metal parts, inspect for wear and damage, check bearings, and apply specified torques. Safety is the top priority when working on equipment.
CASE CX350B Crawler Excavator Service Repair Manual.pdff8usjekdmdm
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX350B Crawler Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document provides safety information, standard torque specifications, and general guidelines for servicing excavators. It discusses cleaning and inspecting parts during disassembly, checking bearings for wear, and lubricating components. Proper cleaning, inspection, lubrication, and torque specifications are important for servicing excavators safely and effectively.
CASE CX350B Crawler Excavator Service Repair Manual.pdff8usejdkkddme3
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX350B Crawler Excavator Service Repair Manual.pdffujsekdmmdm
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual.pdff8usejdkkddme3
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX350B Crawler Excavator Service Repair Manual Instant Download.pdfpugangjia7703
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual.pdffujsekdmmdm
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing excavators. It instructs technicians to clean all metal parts, inspect for wear and damage, check bearings, and apply specified torques. Safety is the top priority when working on equipment.
CASE CX350B Crawler Excavator Service Repair Manual.pdffujkskemdmd
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual.pdff8usejdkdmmd1
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
Komatsu D375A-5E0 Dozer Bulldozer Service Repair Manual S/N 50001 and uphdksemmme
This is the Highly Detailed factory service repair manual for theKOMATSU D375A-5E0 DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D375A-5E0 DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Index and Foreword
Specification
Structure, Function and Maintenance Standard
Standard Value Table
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Diagrams and Drawings
+++++Field Assembly Instruction
Manual Covers:
Specifications
Precautions for Field Assembly
Disposal of Removed Parts
Assembly Procedure, Necessary Equipment, and Schedule
Layout of Kit
Style for Transportation
Table of Tools for Field Assembly
Tightening Torque
Coating Materials List
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D375A-5E0 DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Case cx130 crawler excavator service repair manual instant downloadufdjjskekfkskem
This document provides safety, general information and standard torque specifications for CNH excavators. It outlines cleaning and inspection procedures for parts and contains warnings about safety precautions that must be followed to prevent injury. Standard torque values are provided for cap screws and nuts used on CNH excavators.
Case cx800 crawler excavator service repair manual instant downloaduuufjjsjekkem
This document provides specifications and torque settings for a Case CX800 Crawler Excavator, including:
1. The type, serial number, and year of manufacture for the machine and engine.
2. Details on hydraulic fluids, oils, fuels, and other consumables used in the machine.
3. Technical specifications for the engine, electrical system, hydraulic system, undercarriage, and attachments.
4. Dimensions and wear limits for tracks, rollers, and attachment joints.
5. Special torque settings for fasteners on the machine.
Case cx800 crawler excavator service repair manualfjjskekskem
This document provides specifications and dimensions for a Case excavator. It includes:
1. Serial numbers and year of manufacture for the machine and engine.
2. Lists of recommended fluids including hydraulic fluid, transmission oil, greases, engine oil, fuel, and antifreeze.
3. Specifications for the engine, capacities, electrical and hydraulic systems, cylinders, controls, undercarriage, and attachments.
4. Dimensional limits and wear specifications for track components and attachment joints.
5. A table of special torque settings and an overall machine dimension diagram. Safety warnings are also provided.
Case cx290 b crawler excavator service repair manualfujsjefkskemm
This document provides the table of contents for a service manual for a CX290B crawler excavator. It lists 9 divisions that cover topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more. Safety information, general repair instructions, and torque specifications are provided in section 1001. The manual contains information to guide technicians in repairs, maintenance, and inspections of the excavator's various components.
New holland l140 skid steer loader service repair manual instant downloadyhfhjjsenneer
This document contains a repair manual for New Holland skid steer loaders models L140 and L150, including cab upgrade machines. It provides technical information and instructions for properly servicing and maintaining the machines. Safety precautions are outlined, including proper support of the machine and boom during repairs. Specifications, dimensions, and diagrams are also included.
New holland l150 skid steer loader service repair manual instant downloadyhfhjjsenneer
This document contains a repair manual for New Holland skid steer loaders models L140 and L150, including cab upgrade machines. It provides technical information and instructions for properly servicing and maintaining the machines. Safety precautions are outlined, including proper support of the machine and boom during repairs. Specifications, dimensions, and diagrams are also included.
McCormick MC100 Tractor Service Repair Manualfjkskejksem
This is the Highly Detailed factory service repair manual for theMCCORMICK MC100 TRACTOR , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MCCORMICK MC100 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Fuel System
Electrical
Steering
Transmission
Brakes
Hydraulic
Chassis and Mounted Equipment
Controller Systems
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMCCORMICK MC100 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Case cx350 b crawler excavator service repair manualfjskekxswesemm
The engine can be removed from the excavator by following these steps:
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove mounting bracket.
3. Remove fan guard and fan guide rubber. Disconnect radiator hoses.
4. Disconnect compressor lines and remove mounting bolts. Use plugs to cover openings.
5. The engine can then be lifted out after disconnecting all mounting points and fluid lines. Take precautions when lifting heavy components.
Case cx370 b crawler excavator service repair manualfjskekxswesemm
This document provides service information for crawler excavators CX350B and CX370B, including:
- Safety guidelines and standard torque specifications for nuts and bolts.
- A table of contents listing the sections and reference numbers for the service manual covering topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more.
- Instructions on cleaning, inspection, and installation of bearings during disassembly and reassembly of components.
CASE CX370B Crawler Excavator Service Repair Manual.pdffujkskemdmd
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual Instant Download.pdfpugangjia7703
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing excavators. It instructs technicians to clean all metal parts, inspect for wear and damage, check bearings, and apply specified torques. Safety is the top priority when working on equipment.
CASE CX350B Crawler Excavator Service Repair Manual.pdff8usjekdmdm
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX350B Crawler Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document provides safety information, standard torque specifications, and general guidelines for servicing excavators. It discusses cleaning and inspecting parts during disassembly, checking bearings for wear, and lubricating components. Proper cleaning, inspection, lubrication, and torque specifications are important for servicing excavators safely and effectively.
CASE CX350B Crawler Excavator Service Repair Manual.pdff8usejdkkddme3
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX350B Crawler Excavator Service Repair Manual.pdffujsekdmmdm
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual.pdff8usejdkkddme3
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX350B Crawler Excavator Service Repair Manual Instant Download.pdfpugangjia7703
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual.pdffujsekdmmdm
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing excavators. It instructs technicians to clean all metal parts, inspect for wear and damage, check bearings, and apply specified torques. Safety is the top priority when working on equipment.
CASE CX350B Crawler Excavator Service Repair Manual.pdffujkskemdmd
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual.pdff8usejdkdmmd1
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX370B Crawler Excavator Service Repair Manual.pdfcub93808097
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX350B Crawler Excavator Service Repair Manual.pdfcub93808097
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for removing engine.
CASE CX370B Crawler Excavator Service Repair Manual.pdff8usjekdmdm
1. Drain engine oil and coolant. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove radiator hoses. Loosen line bolts and remove compressor lines. Remove bolts to prepare for engine removal.
CASE CX350B Crawler Excavator Service Repair Manual.pdff8usejdkdmmd1
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing excavators. It instructs technicians to clean all metal parts, inspect for wear and damage, check bearings, and apply specified torques. Safety is the top priority when working on equipment.
Case cx350 b crawler excavator service repair manualfujsejfkskemem
This service manual provides information on safety, general maintenance procedures, and standard torque specifications for CX350B and CX370B crawler excavators. It includes sections covering the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and other systems. Refer to the table of contents for specific component removal and installation instructions, specifications, and troubleshooting information. Standard practices for cleaning, inspection, and bearing maintenance are outlined.
Case cx370 b crawler excavator service repair manualfujjsekfkksekm
1. Drain engine oil and coolant from radiator. Remove engine hood and pump.
2. Disassemble retaining screws and remove bracket. Remove fan guard and fan guide rubber.
3. Loosen hosebands and remove upper and lower radiator hoses. Loosen line bolts and remove lines from compressor.
4. Remove bolts and lift engine using suitable lifting equipment. Inspect lifting equipment before lifting. Install in reverse order.
Similar to Case cx160 b crawler excavator service repair manual (20)
Komatsu pc200 lc 3 crawler excavator parts catalogue manual - sn 20001 and upfujsjefkkkemme
This document provides parts information for a PC200LC-3 excavator with serial numbers 20001 and up. It includes 380 line items grouped into 10 categories: Engine Related Parts and Electrical System, Travel and Final Drive, Undercarriage, Swing and Control System, Revolving Frame and Cab, Work Equipment Control System, Work Equipment, Optional Parts, Special Application Parts, and Mark Plate/Tool and Kit. Each line item lists the part name, number, and applicable serial number range.
Komatsu pc138 us 2 crawler excavator parts catalogue manual - sn 4501 and upfujsjefkkkemme
This document provides parts information for a PC138US-2 excavator with serial numbers 4501 and up for overseas versions. It includes a parts list and part numbers for the engine and its related parts, cooling system, and other systems. The parts are organized by category and subcategories with references to other documents providing more detailed part specifications and diagrams.
Komatsu pc138 us 2 crawler excavator parts catalogue manual - sn 1001 and upfujsjefkkkemme
This document provides parts information for a Komatsu PC138US-2 excavator with serial numbers 1001 and up. It includes sections covering the engine and related parts, cooling system, fuel tank, electrical system, hydraulics, frames, operator controls, guards, undercarriage, work equipment, markings and plates, accessories, special products, and service kits. The document lists part numbers, descriptions, quantities and applicable serial number ranges for each component.
Komatsu hm350 1 articulated dump truck parts catalogue manual - sn 1001 and upfujsjefkkkemme
This document provides parts information for an HM350-1 excavator with serial numbers 1001 and up. It includes a list of major systems and subsystems with 3-digit codes for easy part identification (e.g. B0150 refers to the air conditioning system). For each part, the document provides the part number, name, quantity, and applicable serial number range. The level of detail in the parts listings provides a complete resource for technicians to identify replacement components for this excavator model.
Komatsu hm300 3 articulated dump truck parts catalogue manual - sn 3001 and upfujsjefkkkemme
This document provides parts information for an HM300-3 excavator with serial numbers 3001 and up. It includes sections for the engine, cooling system, fuel system, electrical system, and other components. The cooling system section lists units for the radiator, aftercooler, coolant piping, brake oil cooler, and brake oil cooler piping. Parts are identified by index number, part number, description, and quantity. Diagrams and part numbers are provided for individual components.
Case cx490 c crawler excavators std version (tier 3) turkish market service...fujsjefkkkemme
This service manual section provides specifications for the Isuzu 6UZ1 diesel engine, including its cooling system, lubrication system, and electrical system. The engine is an inline 6-cylinder overhead cam design with a displacement of 9.839 liters. Maximum output is 270 kW at 2000 RPM with maximum torque of 1435 Nm at 1500 RPM. Coolant capacity is 22.5 liters and oil capacity ranges from 30-41 liters. The generator is a 24V/50A unit and the starter is a 24V/5.5kW unit designed to crank the engine at over 3100 RPM.
Case cx250 d long reach crawler excavator service repair manualfujsjefkkkemme
This document is the service manual for CX250D Crawler excavators. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper tools and procedures. Liability is disclaimed for damages caused by unapproved parts or improper servicing.
Case cx160 d lc version tier 4b (final) crawler excavator service repair manualfujsjefkkkemme
This service manual section provides specifications and descriptions for the engine on a Case CX160D excavator. It details the engine components and systems, including the electronic control system, cylinder block, piston, cylinder head, crankshaft, EGR system, fuel system, cooling system, electrical system, and preheat system. Identification information and maintenance instructions are also provided.
Case cx130 d standard with blade version tier 4b (final) crawler excavator se...fujsjefkkkemme
This document is a service manual that contains information for servicing and repairing CX130D crawler excavators. It includes sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper instructions and tools, and unauthorized repairs will void any warranty.
Case cx130 b forestry machine crawler excavator service repair manualfujsjefkkkemme
The document provides instructions for removing the engine from an excavator by removing components connected to the engine like hoses, wires, and shields. Specific components that must be removed include the radiator hoses, fuel lines, battery cables, and other connecting parts. Safety precautions are noted such as draining fluids before removing components and capping open ports to prevent contamination.
Case cx80 tier 3 crawler excavator service repair manualfujsjefkkkemme
This document is the service manual for the Crawler Excavator CX75SR/CX80 Tier 3. It contains information on safety, general specifications, removal and installation instructions for components, and disassembly/assembly instructions. The manual is divided into sections covering the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more. Schematics and specifications are referenced but not included.
Case cx75 sr tier 3 crawler excavator service repair manualfujsjefkkkemme
This document is the service manual for the Crawler Excavator CX75SR/CX80 Tier 3. It contains information on safety, general specifications, removal and installation instructions for components, and disassembly/assembly instructions. The manual is divided into sections covering the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more. Schematics and specifications are provided for repairs and maintenance. Safety warnings are included throughout to prevent injury during service.
This document contains instructions for removing and installing an engine from a Case 9010 excavator. It describes disconnecting hoses, wires, and other components to separate the engine from the machine. It also provides details on installing the engine, including bleeding air from the cooling system. The torque specifications for reinstalling components like engine mounts and hydraulic pump mounting bolts are referenced.
Case 2050 m tier 4a (interim) crawler dozer service repair manual (pin nedc20...fujsjefkkkemme
This document is the service manual for the 2050M Tier 4A crawler dozer. It provides part numbers and replacement information for engine systems, hydraulic systems, tracks, frames, electrical systems, and other components. The manual instructs technicians to only perform repairs as specified and using the proper tools and safety precautions.
Case 2050 m stage iiib crawler dozer service repair manual (pin ngc109000 and...fujsjefkkkemme
This document is a service manual for CNH Industrial's 2050M Crawler Dozer covering various models and engine configurations. It contains over 150 sections organized by technical system covering all aspects of servicing and repairing the dozer. The manual provides detailed instructions, specifications, component locations, and troubleshooting information to qualified service technicians. Safety precautions are included to prevent injury when working on the machine.
Case 2050 m stage iiib crawler dozer service repair manual (pin nedc20000 and...fujsjefkkkemme
This document is a service manual for CNH Industrial 2050M crawler dozers with Stage IIIB engines. It provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, frames, tracks, cab climate control, electrical systems, and other components. The manual includes detailed sections on the engine and crankcase, fuel system, air intake system, turbocharger, cooling system, lubrication system, pumps, motors, brakes, hydraulic valves and cylinders, tracks and suspensions, heating, ventilation, electrical harnesses, starters, alternators, batteries, gauges, and cab controls.
Case 2050 m crawler dozer service repair manualfujsjefkkkemme
This document is a service manual for a 2050M crawler dozer that contains sections on the engine, rear axle system, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and the platform, cab, bodywork, and decals. The introduction section outlines safety rules and signal word definitions for personal safety during operation and service of the machine.
Case 1850 k tier 3 crawler dozer service repair manualfujsjefkkkemme
This document is a service manual for a 1850K Crawler Dozer that contains important safety information and identifies key components. It provides warnings about performing unauthorized repairs and using unapproved parts. The summary lists safety symbols used in the manual and directs the reader to carefully follow all safety instructions to avoid risks and protect their health and safety. It also provides an overview of the manual's contents, which includes sections on the engine, transmission, brakes, undercarriage, dozing equipment, and electrical and hydraulic systems.
Case 1650 m tier 4a (interim) crawler dozer service repair manual (pin nfdc16...fujsjefkkkemme
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 47907868. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when operating or servicing the machine.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Lep SM160BTOC-1EN Issued 07-09
DIVISION/SECTION SECTION N° REFERENCE N°
8 UPPERSTRUCTURE HYDRAULICS
Depressurising and decontaminating the hydraulic system, use of the
vacuum pump and bleeding the components..............................................8000 SM160B8000-0EN
Specifications, troubleshooting, checks and
hydraulic pressure settings..........................................................................8001 SM160B8001-1EN
Removal and installation of the hydraulic reservoir .........................................8002 SM160B8002-0EN
Removal and installation of the main hydraulic pump......................................8003 SM160B8003-0EN
Removal and installation of the main hydraulic control valve...........................8004 SM160B8004-0EN
Removal and installation of the attachment cylinders......................................8005 SM160B8005-0EN
Removal and installation of the hydraulic swivel..............................................8006 SM160B8006-0EN
Removal and installation of the pilot blocs.......................................................8007 SM160B8007-1EN
Removal and installation of the swing motor ..................................................8008 SM160B8008-0EN
Disassembly and assembly of the main hydraulic pump .................................8010 SM160B8010-0EN
Disassembly and assembly of the main hydraulic control valve ......................8011 SM160B8011-0EN
Disassembly and assembly of the attachment cylinders .................................8012 SM130B8012-0EN
Disassembly and assembly of the hand control levers ....................................8013 SM130B8013-0EN
Disassembly and assembly of the foot control levers ......................................8014 SM160B8014-1EN
Disassembly and assembly of the cushion valve.............................................8016 SM160B8016-1EN
Removal and installation of the safety valve....................................................8017 SM130B8017-0EN
Hydraulic swivel, disassembly and assembly ..................................................8018 SM160B8018-0EN
Disassembly and assembly of the swing motor ...............................................8019 SM210B8019-0EN
Hydraulic functions ..........................................................................................8020 SM160B8020-2EN
Hydraulic component functions........................................................................8030 SM160B8030-1EN
9 UPPERSTRUCTURE
Removal and installation of the counterweight ................................................9002 SM160B9002-0EN
Removal and installation of the boom, dipper and bucket ...............................9003 SM160B9003-0EN
Removal and installation of the seat................................................................9004 SM130B9004-0EN
Removal and installation of the cab and cab equipment .................................9005 SM130B9005-0EN
Air conditioner functions and troubleshooting..................................................9006 SM210B9006-3EN
Air conditioning unit .........................................................................................9007 SM130B9007-0EN
Air conditioning components............................................................................9009 SM160B9009-0EN
Large size hydraulic schematics................................................................... Pocket 87593994B
Large size electrical schematics................................................................... Pocket 87594000B
NOTE: CNH France S.A. Company reserves the right to make changes in the specification and design of
the machine without prior notice and without incurring any obligation to modify units previously sold.
The description of the models shown in this manual has been made in accordance with the technical speci-
fications known as of the date of design of this document.
All data given in this manual is subject to production variations. Dimensions and weights are provided with
approximate values and the machine fitting shown in the illustrations may not correspond with standard
models. For precise information on specific machine models and versions, please contact your CASE
dealer.
Reproduction or tranlation, even partial, is prohibited without written authorization from CNH France SA
Company.
4. 1001-2
Lep 7-27691EN Issued 02-06
TABLE OF CONTENTS
GENERAL INFORMATION .......................................................................................................................................3
SAFETY.....................................................................................................................................................................4
STANDARD TORQUE DATA FOR CAP SCREWS AND NUTS...............................................................................6
WARNING : This symbol is used in this manual to indicate important safety messages. Whenever you see
this symbol, carefully read the message that follows, as there is a risk of serious injury.!
5. 1001-3
Lep 7-27691EN Issued 02-06
GENERAL INFORMATION
Cleanning
Clean all metal parts except bearings, in a suitable
cleaning solvent or by steam cleaning. Do not use
caustic soda for steam cleaning. After cleaning, dry
and put oil on all parts. Clean oil passages with
compressed air. Clean bearings in a suitable cleaning
solvent, dry the bearings completely and put oil on
the bearings.
Inspection
Check all parts when the parts are disassembled.
Replace all parts that have wear or damage. Small
scoring or grooves can be removed with a hone or
crocus cloth. Complete a visual inspection for
indications of wear, pitting and the replacement of
parts necessary to prevent early failures.
Bearings
Check bearings for easy action. If bearings have a
loose fit or rough action replace the bearing. Wash
bearings with a suitable cleaning solvent and permit
to air dry. DO NOT DRY BEARINGS WITH
COMPRESSED AIR.
Needle bearings
Before you press needle bearings in a bore always
remove any metal protrusions in the bore or edge of
the bore. Before you press bearings into position put
petroleum jelly on the inside and outside diameter of
the bearings.
Gears
Check all gears for wear and damage. Replace gears
that have wear or damage.
Oil seals, O-rings and gaskets
Always install new oil seals, O-rings and gaskets. Put
petroleum jelly on seals and O-rings.
Shafts
Check all shafts that have wear or damage. Check
the bearing and oil seal surfaces of the shafts for
damage.
Service parts
Always install genuine Case service parts. When
ordering refer to the Parts Catalog for the correct part
number of the genuine Case replacement items.
Failures due to the use of other than genuine Case
replacement parts are not covered by warranty.
Lubrication
Only use the oils and lubricants specified in the
Operator’s or Service Manuals. Failures due to the
use of non-specified oils and lubricants are not
covered by warranty.
6. 1001-4
Lep 7-27691EN Issued 02-06
SAFETY
This symbol means ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED. The message that follows the
symbol contains important information about safety. Carefully
read the message. Make sure you fully understand the
causes of possible injury or death.
!
To prevent injury always follow the Warning, Caution
and Danger notes in this section and throughout the
manual.
Put the warning tag shown below on the key for the
keyswitch when servicing or repairing the machine.
One warning tag is supplied with each machine.
Additional tags Part Number 331-4614 are available
from your service parts supplier
.
WARNING: Read the operator’s manual to
familiarize yourself with the correct control
functions.
!
WARNING: Operate the machine and
equipment controls from the seat position
only. Any other method could result in
serious injury.
!
WARNING: This is a one man machine, no
riders allowed.!
WARNING: Before starting engine, study
Operator’s Manual safety messages. Read
all safety signs on machine. Clear the area of
other persons. Learn and practice safe use
of controls before operating.
It is your responsibility to understand and
follow manufacturers instructions on
machine operation, service and to observe
pertinent laws and regulations. Operator’s
and Service Manuals may be obtained from
your Case dealer.
!
WARNING: If you wear clothing that is too
loose or do not use the correct safety
equipment for your job, you can be injured.
Always wear clothing that will not catch on
objects. Extra safety equipment that can be
required includes hard hat, safety shoes, ear
protection, eye or face protection, heavy
gloves and reflector clothing.
!
WARNING: When working in the area of the
fan belt with the engine running, avoid loose
clothing if possible, and use extreme caution.
!
WARNING: When doing checks and tests
on the equipment hydraulics, follow the
procedures as they are written. DO NOT
change the procedure.
!
WARNING: When putting the hydraulic
cylinders on this machine through the
necessary cycles to check operation or to
remove air from a circuit, make sure all
people are out of the way.
!
7. 1001-5
Lep 7-27691EN Issued 02-06
WARNING: Use insulated gloves or mittens
when working with hot parts.!
WARNING: Lower all attachments to the
ground or use stands to safely support the
attachments before you do any maintenance
or service.
!
WARNING: Pin sized and smaller streams
of hydraulic oil under pressure can penetrate
the skin and result in serious infection. If
hydraulic oil under pressure does penetrate
the skin, seek medical treatment
immediately. Maintain all hoses and tubes in
good condition. Make sure all connections
are tight. Make a replacement of any tube or
hose that is damaged or thought to be
damaged. DO NOT use your hand to check
for leaks, use a piece of cardboard or wood.
!
WARNING: When removing hardened pins
such as a pivot pin, or a hardened shaft, use
a soft head (brass or bronze) hammer or use
a driver made from brass or bronze and a
steel head hammer.
!
WARNING: When using a hammer to
remove and install pivot pins or separate
parts using compressed air or using a
grinder, wear eye protection that completely
encloses the eyes (approved goggles or
other approved eye protectors).
!
WARNING: Use suitable floor (service)
jacks or chain hoist to raise wheels or tracks
off the floor. Always block machine in place
with suitable safety stands.
!
WARNING: When servicing or repairing the
machine, keep the shop floor and operator’s
compartment and steps free of oil, water,
grease, tools, etc. Use an oil absorbing
material and/or shop cloths as required. Use
safe practices at all times.
!
WARNING: Some components of this
machine are very heavy. Use suitable lifting
equipment or additional help as instructed in
this Service Manual.
!
WARNING: Engine exhaust fumes can
cause death. If it is necessary to start the
engine in a closed place, remove the exhaust
fumes from the area with an exhaust pipe
extension. Open the doors and get outside
air into the area.
!
WARNING: When the battery electrolyte is
frozen, the battery can explode if (1), you try
to charge the battery, or (2), you try to jump
start and run the engine. To prevent the
battery electrolyte from freezing, try to keep
the battery at full charge. If you do not follow
these instructions, you or others in the area
can be injured.
!
8. 1001-6
Lep 7-27691EN Issued 02-06
STANDARD TORQUE DATA FOR CAP SCREWS AND NUTS
Tightening of cap screws, nuts
Tighten alternately so that tightening torque can be applied evenly. The numbers in the figure below indicate the
order of tightening.
JS00481A
Cap screws which have had Loctite used (white residue remains after removal) should be cleaned with loght oil or
suitable cleaning solvent and dried. Apply 2-3 drops of Loctite to the thread portion of the cap screw and then
tighten.
Torque table
Tighten cap screws and nuts according to the table below if there are no other special instructions.
Cap Screw Name Size (Size) M6 M8 M10 M12 M14 M16 M18 M20
Cap Screw
Spanner
[mm] 10 13 17 19 22 24 27 30
[in.] 0.39 0.51 0.67 0.75 0.87 0.95 1.06 1.18
Tightening
torque
[Nm] 6.9 19.6 39.2 58.8 98.1 156.9 196.1 294.2
[lb-ft] 5.1 14.5 28.9 43.4 72.3 115.7 144.6 217
Socket
Head Cap
Screw
Spanner
[mm] 5 6 8 10 12 14 14 17
[in.] 0.20 0.24 0.32 0.39 0.47 0.55 0.55 0.67
Tightening
torque
[Nm] 8.8 21.6 42.1 78.5 117.7 176.5 245.2 343.2
[lb-ft] 6.5 15.9 31.1 57.9 86.9 130.2 181 253.2
10. Lep SM130B2000-0EN Issued 03-08
2000-3
REMOVAL AND INSTALLATION OF THE ENGINE ASSEMBLY
1 Removal of the engine
[1] Remove the counterweight.
(For details, see "Removal and Installation of Coun-
terweight")
[2] Remove the pump.
(For details, see "Removal and Installation of
Pump")
[3] Disassemble the retaining screws (1) and (2), and
then remove the fan shroud (3).
Caution:
Keep away from fire.
Be sure to release hydraulic pressure before beginning work.
The air conditioner circuit is filled with high-pressure gas, so there is the danger of
gas splaying out when loosening lines.
Do not use open flames and do not allow sparks near the battery.
Caution:
Be sure to stop the engine before beginning work.
Be sure to inspect the wire rope and other lifting equipment before beginning work.
Do not stand or pass under the suspended load.
11. Lep SM130B2000-0EN Issued 03-08
2000-4
[4] Disassemble the retaining screws (1), and then
remove the fan guard (2).
[5] Loosen the hoseband (1), and then remove the
upper hose (2) from the radiator.
[6] Loosen the hoseband (3), and then remove the
lower hose (4) from the radiator.
• Use caps to cover the radiator and hoses and pre-
vent the entry of water, dust or dirt.
• Before removing the radiator hoses, completely
drain the coolant.
[7] Loosen the adjusting bolts (1) on the pipe, and then
remove the 2 pipes (2) and (3) from the compressor.
• Always remove the low-pressure pipe (2) first.
• Attach caps or plugs to the compressor and pipes to
prevent any entry of water, dust or dirt.
RF11001-007
1
1
2
1
2
3
4
NF11002-008
12 3
12. Lep SM130B2000-0EN Issued 03-08
2000-5
[8] Loosen the hoseband (1) on the inter cooler, and
then remove the hose (2).
• Use caps to cover the pipe and hose and prevent
the entry of water, dust or dirt
[9] Remove the hosebands (1) in the three locations.
[10]Insert inside the breather hose (1) that is on the
outside.
NF11002-009
2
1
NF11002-010
1
NF11002-011
1
13. Lep SM130B2000-0EN Issued 03-08
2000-6
[11]Prepare a waste oil can (1). As the engine oil hose
will be removed, first drain the engine oil.
[12]Remove the hoses (1).
• Mark the engine and hoses so that the connectors
match at the time of assembly.
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
• Clean the engine and hoses by spraying with a parts
cleaner to prevent scratches and prevent dirt from
accumulating on the connectors.
[13]Remove the bolt (1), and then remove the battery
cable (2) on the negative side.
• When removing the terminal and harness, secure
them so that do not interfere with the frame.
Also, cover with a rubber cap to protect against
sparks.
NF11002-012
1
NF11002-013
1
NF11002-014
1
2
14. Lep SM130B2000-0EN Issued 03-08
2000-7
[14]Remove the nut (1), and then remove the wire (2)
from the starter motor.
[15]Remove the jump-start protector (3), remove the
nut (1), and then remove the wire (2) from the
starter motor.
[16]Remove the hose stopper (1), and then remove the
fuel hose (2).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
[17]Remove the hose stopper (1), and then remove the
fuel hose (2).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
1
2 NF11002-015
1
3
2
NF11002-016
NF11002-017
1
2
NF11002-018
2
1
15. Lep SM130B2000-0EN Issued 03-08
2000-8
[18]Disassemble the retaining screws (1), and then
remove the box cover (2).
[19]Remove the connectors (1) in the box.
• After tying the connectors together, put them in a
plastic bag.
[20]Loosen the hoseband (1), and then remove the
heater hose (2).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
[21]Loosen the hoseband (1), and then remove the
heater hose (2).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
NF11002-019
2
1
1
NF11002-020
NF11002-021
1
2
NF11002-022
1
2
16. Lep SM130B2000-0EN Issued 03-08
2000-9
[22]Loosen the hoseband (1), and then remove the
radiator hose (2).
• Use caps to cover the line and hose and prevent the
entry of water, dust or dirt.
[23]Loosen the hoseband (1), and then remove the air
hose (2).
• Use caps to cover the line and hose and prevent the
entry of water, dust or dirt.
[24]Loosen the hoseband (1), and then remove the air
hose (2).
• Use caps to cover the line and hose and prevent the
entry of water, dust or dirt.
[25]Remove the connector (1) from the alternator.
NF11002-023
1
2
NF11002-024
2
1
NF11002-025
2
1
NF11002-026
1
17. Lep SM130B2000-0EN Issued 03-08
2000-10
[26]Remove the nut (1), and then remove the wires (2)
from the alternator.
[27]Remove the bolt (1), and then remove the breather
hose clamp (2).
[28]Connect the 2 shackles (1), and then use the wires
and crane to secure the engine.
NF11002-027
2
1
NF11002-029
1
2
NF11002-030
1
1
18. Lep SM130B2000-0EN Issued 03-08
2000-11
[29]Disassemble the retaining screws (1) from the
mount.
[30]Use the wires and crane to lift the engine.
[31]Thoroughly check that the location is safe before
lowering the engine on wood planks, etc.
NF11002-031
1
1
1
1
NF11002-032
19. Lep SM130B2000-0EN Issued 03-08
2000-12
2 Installation of the engine
[1] To install the engine, perform the reverse of the removal procedure.
After installing the engine, resupply coolant and engine oil, perform fuel line air bleeding, and perform filling for the
air conditioner gas.
For details, see the individual explanations for each procedure.
[2] Run the engine at no-load idling and check for any water or oil leaks.
[3] Attach the hydraulic pump, covers, and counterweight.
For details, see the individual explanations for each procedure.
20. Lep SM160B2001-0EN Issued 07-09
2001-3
REMOVAL AND INSTALLATION OF FUEL COOLER
1 Removal of fuel cooler
[1] Mark the fuel cooler and hoses so that the connec-
tors match at the time of assembly.
Loosen the hosebands (3) and (4), and then remove
the hoses (1) and (2).
• Fuel will spill out, so place a drip pan directly below
the area.
• Attach caps or plugs to the fuel cooler and hoses to
prevent any entry of water, dust or dirt.
[2] Disassemble the retaining screws (1), and then
remove the fuel cooler unit (2).
2 Installation the fuel cooler
Perform the reverse of the removal procedure.
• After connecting the hoses, carefully check for any fuel leaks.
Caution:
Be sure to stop the engine before beginning work.
As the fuel hose will be removed, strictly prohibit open flames.
NF11002-060
1 3
2 4
NF11002-061
1
2
21. Lep SM160B2001-0EN Issued 07-09
2001-4
REMOVAL AND INSTALLATION OF INTER COOLER
1 Removal of inter cooler
[1] Remove the fuel cooler.
(For details, see "Removal and Installation of Fuel
Cooler")
[2] Loosen the bolts (1), and then remove the cover (2).
[3] Loosen the hosebands (1) in the two locations, and
then remove the hoses (2).
[4] Loosen the hosebands (1) in the two locations, and
then remove the hoses (2).
Caution:
Be sure to stop the engine before beginning work.
As the fuel hose will be removed, strictly prohibit open flames.
1
2
NF11002-066
1
2
NF11002-067
1
2
NF11002-068
22. Lep SM160B2001-0EN Issued 07-09
2001-5
[5] Remove the bolt (1).
[6] Attach a wire to the top section of the inter cooler
using a shackle, and lift the inter cooler to remove it.
2 Installation of inter cooler
Perform the reverse of the removal procedure.
Check for any air leaks.
1
NF11002-069
NF11002-070
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Lep SM160B2001-0EN Issued 07-09
2001-6
REMOVAL AND INSTALLATION OF RADIATOR
1 Removal of radiator
[1] Disassemble the retaining screws (1), and then
remove the under cover (2).
[2] Place the drain tank (4) under the drain hose (3).
[3] To make it easier to drain the coolant, remove the
radiator cap (1).
• After draining the coolant, install the cap (1).
Caution:
Do not remove the radiator cap when the radiator coolant temperature is high. Hot
liquid could spray out.
Caution:
Be sure to release hydraulic pressure before beginning work.
Be sure to stop the engine before beginning work.
Be sure to inspect the wire rope and other lifting equipment before beginning work.
Do not stand or pass under the suspended load.
1
2
3
LM13009-001
4
3
LM13009-002
NM13002-003
1
25. Lep SM160B2001-0EN Issued 07-09
2001-7
[4] Loosen the drain plug (6), and then drain the cool-
ant.
[5] Remove the bolts (9), and then remove the cover
(10) and (38).
[6] Loosen the hose band (12), and then remove the
upper hose (13) and lower hose (14) from the radia-
tor.
• Use caps to cover the radiator and hoses to prevent
the entry of water, dust or dirt.
Hose band tightening torque for hose installation:
4.9 - 5.9 Nm
6
LM13009-003
9 10 38
LM13009-005
14
12
12
13
LM13009-007
26. Lep SM160B2001-0EN Issued 07-09
2001-8
[7] Loosen the hoseband (7), and then remove the hose
(8) from the radiator.
• Use caps to cover the radiator and hoses and pre-
vent the entry of water, dust or dirt.
Hose band tightening torque for hose installation:
8.8 - 9.8 Nm
[8] Remove the 7 bolts (11) from the radiator cover (39).
[9] Remove the drain plug (15), loosen the hose band
(17), and then remove the hose (16).
Tightening torque for drain plug installation:
14.7 - 24.5 Nm
7
8
LM13009-004
11
11
39
LM13009-006
NM13002-009
1
3
2
27. Lep SM160B2001-0EN Issued 07-09
2001-9
[10]Loosen the hose band (19), and then remove the
hose (18) from the radiator cap.
• Attach caps or plugs to the hose to prevent any
entry of water, dust or dirt.
[11]Turn up the rubber band (1) on the fan.
19
18
LM13009-008
NM13002-011
1