Crandall Engineering, Inc. is a full-service architectural and professional engineering firm based in Gas City, Indiana, serving a diverse range of clients including commercial developers, civic organizations, and various industries. Established in 2002, the firm emphasizes a team-oriented approach to project management and offers services in structural analysis, historical building remediation, and design of various facilities while maintaining a focus on customer needs and sustainable practices. The principal, Lisa Crandall, leads a team skilled in managing projects that vary from community centers to complex structural designs, ensuring all objectives are met within budget and time constraints.

1. Crandall Engineering, Inc.
Statement of Qualifications
Professional Engineering Whom We Serve:
•Commercial Developers & Builders
Architectural •Civic Organizations & Corporations
•All Denominations of Churches
Structural •Architects
•Steel Fabricators & Erectors
Civil •Glass Factories
•Automotive Factories & Others
•Food Processing Plants
•Bio-Fuel and Oil & Gas Industry
•Residential Developers & Builders
Engineering that works
Engineering with style i

2. Table of Contents
Table of Contents ii
CHAPTE R 1
Company Information 1 Masonic Lodge 14
Background 2 Gas City 2nd Street Promenade 14
Project Management 3 YWCA Thornburg House 14
Computers and Software 3 Gas City Community Center 15
New Hope Baptist Church 15
CHAPTE R 2 Grant County Presbyterian 16
Project Types 4 Cornerstone Christian 16
A Sampling of Clients 6 Payne’s Custard 17
List of References 8 DeHart Farms Bio-Diesel 17
Park Villa L.T.C. 17
CHAPTE R 3 Madison Park Church of God 18
Similar Projects 9 I-69 Industrial Park 18
Dr Rosenthall Orthodontics 10
Culver’s of Marion 10 CHAPTE R 4
Historic Ann Shop (Crandall Offices) 11 Staff Listing 19
Historic Montgomery Ward 11 Organization 19
King’s Academy (J.C. Knight) 12 Lisa Crandall, PE, MSME 20
Marion Incubator/Titan Building 12 Caleb Crandall, BS 31
Historic McMahan-Leib Co. Building 12 Christopher Alexander, M.Arch 33
Baldwin Place 13 Mike Westfall, BS, EIT 34
Marion Steel Fabrication Office 13 Jana Griffin, BS 35
Old Active Products Building 13 Becky Shildmyer 36
WBE Certification 37
Crandall Engineering, Inc. ii

3. S T A T E M E N T O F Q U A L I F I C A T I O N S
1
Chapter
Location of Office:
Crandall Engineering, Inc.
236 East Main Street
Gas City, IN 46933
765.677.0996 Phone
765.677.0997 Fax
www.crandalleng.com
Crandall Engineering, Inc. 1

4. Background
Crandall Engineering – Engineering that works – Engineering with style. The philosophy of Crandall Engineering is
1) to listen carefully to the voice of the customer, their dreams, their vision, their needs, their goals, and their
budget and 2) to work the ideas and requirements together to create a unique solution that reflects the custom-
ers’ personality and style. It is the belief of those at Crandall Engineering to provide many ideas to the customer
and to work as a team to meet all the projects objectives.
Crandall Engineering, Inc. is a full service architectural and professional engineering company. Crandall Engi-
neering became incorporated in 2002 after growing the company since 1997. Crandall Engineering is a Hub zone
and Women’s Business Enterprise Company based in the heart of Indiana for easy access to all parts of Indiana,
Michigan, Ohio and Kentucky.
A sample of recent building design projects include multiple historic building structural evaluations and remedia-
tion plans, churches, commercial buildings, office buildings, warehouses, a food processing plant, fire stations,
school building, city municipal buildings, community service buildings and residential homes among others. Ser-
vices range from specialty services such as stress analysis and setting up a preventive/predictive maintenance
program to a complete architectural and engineering design by a registered professional engineer.
The principal of the company is Lisa Crandall, PE. Crandall is married with 2 grown children. Crandall studied
art at Virginia Commonwealth University. While taking a design class she realized her interest in architecture,
she then studied architectural engineering at the University of Wyoming. Crandall holds a bachelors and masters
degree in mechanical engineering from the University of Tulsa and is licensed as a professional engineer in four-
teen (15) states, Indiana, Massachusetts, Michigan, Nebraska, Kentucky, Ohio, Oklahoma, Mississippi, Kansas,
Missouri, Texas, Louisiana, Tennessee, Alabama, and Pennsylvania and is eligible in all others. Design work and
participation has included all aspects of building design, structural remediation of historic buildings, the Alaska
Pipeline Project, the automobile manufacturing industry, the oil service industry, the renewable fuels industry
and crane lifting and rigging equipment design. The firm is best known for facilitating the hopes and dreams of
those needs addressed to us by our clientele.
Crandall Engineering, Inc. 2

5. PROJECT MANAGEMENT
Project management will be a team concept. Lisa Crandall, PE, will be Principal-in-Charge and will team with
Christopher Alexander on the Project Design. Caleb Crandall will be our Project Manager including project ad-
ministration and scheduling. Crandall Engineering’s approach and philosophy to project management is to coor-
dinate and manage the process of design and keep the Customer/Owner informed at all times. A unified team
approach involves each member clearly understanding his or her role and the deliverable expectations. Each cli-
ent and project is unique and has different needs. We will work with you to tailor our roles and deliverables to
your specifications. If consultants are involved in this project, Crandall Engineering will manage their roles and
responsibilities. Crandall Engineering will coordinate all information, meeting times, and deliverables to the Cus-
tomer/Owner.
We believe in the team approach to design and problem-solving. We encourage input from the community as
well as the particular groups involved such as the Historical Society and the City. Only by receiving candid state-
ments of the goals for this project from all interested and affected parties can the design team propose solutions
that satisfy the multiple goals. The process of open communications in concentrated work sessions facilitates
effective interaction between the design team and the affected parties. The concepts and design proposals will
be presented in several different formats during the feasibility study process. The goal will always be to convey
ideas most clearly. A variety of media can be used, such as sketches, models, and website information.
Computers and Software
Computers and software are kept up to date:
Windows XP Professional Operating system on all workstations in office and
laptops
Microsoft Office Small Business Office software for documentation
Quick Books Professional 2009 Accounting software for financial records
Peachtree Accounting software for financial records
AutoCAD 2006, AutoCAD LT 2006, and CAD based program to create drawings
AutoCAD LT 2010
RISA-3D 3-dimensional Rapid Interactive Structural Analysis
program for structural analysis of complex structures
Windows NT Server 2003 R.E.P. server access from anywhere in the world.
Dell Poweredge Server with tape backup
RAM Structural system analysis with export capability to
SDS-2 and 3-dimensional AutoCAD
Google SketchUp and Kerkythea Architectural and Visualization Software
Crandall Engineering, Inc. 3

6. 2
Chapter PROJECT TYPES & REFERENCES
Project Types
Scope of professional services provided includes the following project types:
• Physical & Capital Needs Assessments for RD, HUD, State tax credit, and senior proprietor
• Structural inspection and analysis of historic masonry buildings
• Structural remediation plans for damaged masonry buildings
• Structural designs for architectural, engineering, and construction firms. Communication between the firm
and Crandall Engineering is done on-site and/or electronically. After an interview and agreement are made
between the parties, AutoCAD drawings can be transmitted electronically.
• Structural analysis: Allowable Stress Design (ASD) to AISC Steel Construction Manual.
• Structural analysis: Finite Element Analysis (FEA) of structures using RAM software. Other model analysis
would be available on an as needed basis. Our engineers are experiences with NASTRAN, ANSYS, RISA, and
ADINA software packages.
• Structural analysis with export capability to SDS-2 for steel detailing or to AutoCAD for structural production
drawings using RAM software.
• Remodeling and renovation designs which include asbestos abatement, plaster repairs, electrical modifications,
and plumbing improvements to current codes.
• Asbestos abatement supervision in large manufacturing plant.
• Specification writing for government entities and private entities
• Cost estimating for government entities and private entities
• Green sustainable design using LEED Criteria.
• Setting up a proactive maintenance program for infrastructures and equipment using preventive maintenance
scheduling and predictive technologies.
• Design of local government buildings such as fire stations, police athletic league, schools, YWCA to meet vari-
ous local community needs and complying with ADA requirements for public accessibility.
• Design of commercial buildings, Types I, II, III, and IV construction per the International Building Code and
state codes as determined by the building occupancy type and complying with ADA requirements for public
accessibility.
Crandall Engineering, Inc. 4

7. • Design of churches. Churches require many special considerations: consider the ministry needs of the con-
gregation, childcare, education facilities, meal catering, growth and ministry projections, audio and visual re-
quirements, financial constraints, and other expectations of the ministry team and the congregation.
Churches vary significantly in their perspective and manner in approaching a building project. Incorporating
affordable ways in include compliance with ADA requirements.
• Engineering for University structures like indoor practice facility/ recreational center and student workout
facility.
• Piping design and layout for process equipment such as oil and gas refineries as well as ethanol and bio-
diesel plants.
• Piping design and layout for utility services of sanitary sewer, storm drain and water supply.
• Residential structural inspection per HUD-FHA foundation requirements by a professional engineer.
• Other residential services: structural analysis for existing structures to remove load bearing walls, analyze
existing trusses or floor beams, redesign of trusses, adding window and door openings, and verifying struc-
tural strength.
• Design of single residences ranging from neighborhood layout with residences to design layouts of individual
homes.
• Design of multi-family structures such as wood frame single story, mid level requiring steel and wood frame,
to high-rise requiring all steel and sprinkler systems.
• CAD drafting services (on our site).
Crandall Engineering, Inc. 5

8. A Sampling of Clients
The following is a listing of some of our clients (in alphabetical order):
Company Name Company Type Job Type Services Provided
Biggs Inc. Property Manager Multi Family Housing Capital Needs Assess-
ments & Contract Draw-
ings
Bowman Construction Contractor Indoor Track and Sports Structural steel, concrete
Facility, Church and MEP engineering
Cardinal Greenway Not for Profit Pedestrian Bridges Structural Design & Con-
struction Drawings
City of Gas City Government 2nd Street Promenade Architectural design and
all engineering
City of Marion Government Fire Stations, Park Build- Engineering renovation,
ings new design
Community School of the Arts Not for Profit Grant Proposal & Section 106 Historic Ap-
Historical Rehab plication & Construction
Cornerstone Christian Fellow- Church Multi-purpose, kitchen Architectural design and
ship and office addition all engineering
Culver’s Franchise Restaurant Architectural design and
all engineering
Eastbrook Community Schools School Corporation Administration Building Architectural design and
& Bond specs all engineering
Economic Growth Council of Government/Developer Office Building for Incu- Architectural design and
Grant County bator concept all engineering
Gas City First United Methodist Church Education Wing and Fel- Architectural design and
Church lowship Hall all engineering
Global Manufacturing Inc. Development 3 Story Office & Hotel Architectural design and
Complex all engineering
Grant County Drainage Board County Government Hydrology Runoff Study and Report
Grant County Presbyterian Church Feasibility Study Architectural design and
Church all engineering
Herman & Kittle Property Manager Multi Family Housing Historic Grant & Capital
Needs Assessment
Industrial Maintenance Steel Fabrication and Glass Factory Hot end Construction drawings &
Specialists erector Structural Steel steel design
Investment Builders Property Manager Multi family housing Capital Needs Assess-
ment & Construction
drawings
Jimmy John’s Gourmet Sand- Franchise Restaurant Architectural Design and
wiches all Engineering
Crandall Engineering, Inc. 6

9. A Sampling of Clients
...Continued
Company Name Company Type Job Type Services Provided
KayBee Corporation Developer Eating Establishment & Architectural design and
Highway drive cut all engineering
KR Montgomery & Associates Architectural Firm Church Structural steel
Inc engineering
Landmark Management Property Manager Multi-family housing Capital Needs Assess-
ment & Construction
drawings
LEAD, Inc. Not for Profit Historic Rehabilitation Parts II & III Historic
Federal Application &
Construction drawings
MACO Development Property Manager Multi-family housing Capital Needs Assess-
ment and Construction
Marion Steel Fabrication, Inc. Steel Fabricator Community Centers, Design-Build, engineering
schools and churches and CAD
Mississinewa Schools School Corporation Hydrology Detention Pond
Drainage Design
Moe’s Southwest Grill Franchise Restaurant Architectural design and
all Engineering
MSKTD & Associates Architectural Firm Food processing plant Structural engineering
(steel & concrete)
Nelson Workplace Services Architectural Firm Retail store Mechanical, electrical and
piping engineering
New Hope Baptist Church Church Educational wing, sanctu- Architectural design and
ary and fellowship hall all engineering
Olynger Construction Property Manager Multi-family Housing Capital Needs Assess-
ments & Construction
drawings
Real Estate Management Corpo- Property Manager Multi Family Housing Capital Needs Assess-
ration ments & Construction
Drawings
Skyline Electric Co., Inc. Electrical contractor Medical center and MRI Electrical Engineering
Clinic
St. Gobaine Glass Factory Structural Design Steel Design and Con-
struction Drawings
Susan Johnson, AIA Architect Dentist Offices Structural Engineer
Swan Real Estate Realtor/Developer Office building Architectural design and
all engineering
Taylor University University Science Building Consultant for LEED
Design & Innovative De-
signs
Trio Development Developer Industrial and Office Architectural design
Park & Site Design and all engineering
Valenti Group Property Manager Multi Family Housing Capital Needs Assess-
ments & Construction
Drawings
7

10. LIST OF REFERENCES
Mr. Jim Swan Mr. Henry Olynger
Marion Steel Fabrication Olynger Construction/
Swan Real Estate/Trio Development Main Street Beautification Gas City
2301 S. Western Avenue 5278 East 600 South
Marion, IN 46952 Marion, IN 46953
Phone:765.664.1478 Phone: 765.674.3074
Mayor Wayne Seybold Mayor Larry Leach
City of Marion/Incubator City of Gas City/Main Street Beautifica-
301 South Branson Street tion/2nd Street Promenade
Marion, IN 46952 211 East Main Street
Phone: 765.662.9931 Gas City, IN 46933
Phone: 765.677.3080
Mr. Bill Henry Pastor Lyle Ewing
Masonic Lodge Evaluation Grant County Presbyterian Church
4104 S. Poplar Street 601 South Main Street
Marion, IN 46953 Jonesboro, IN 46938
Phone: 765.674.9400 Phone: 765.674.4462
Mr. Dennis Roach Mr. Cornel Atkinson
New Venture Ministries Gas City Park Senior Center
State Farm Insurance 316 E South A Street
144 E. Main Street Gas City, IN 46933
Gas City, IN 46933 765.674.5175
Phone: 765.674.9831
Mr. Joe Wiley Mr. Loren Artherhults
Bowman Construction J. G. Bowers
1837 S. Branson Street 5707 S. Western Avenue
Marion, IN 46953 Marion, IN 46953
Phone: 765.664.5161 Phone: 765.677.1000
Crandall Engineering, Inc. 8

11. 3
Chapter
PROJECTS
Engineering and Design permeate life. At Crandall Engineering we strive to combine both engineering and
design to the best effect to help our clients to achieve their goals. We have many projects focused on engi-
neering and assessment. Our engineering experience spans the breadth of construction situations from analy-
sis of existing systems and engineering consulting (Dr. Rosenthall’s Offices) to in-house design and engineer-
ing of new structures (Culver’s of Marion). From feasibility studies to renovations and new construction,
Crandall Engineering is equipped to help the client to achieve their design and budgetary goals.
Historical building inspection to determine structural soundness is an essential aspect of a feasibility study.
Crandall Engineering is especially well equipped and experienced in building inspections. Experiences range
from structural evaluation and renovation plans for offices, churches, schools, factories and community cen-
ters (Crandall Offices; New Venture Ministries, King’s Academy, and the Thornburg House), renovations and
additions (Marion Incubator/Titan Building, the Historic McMahan-Leib Co. Building, Baldwin Place, Marion
Steel Fabrication downtown office and the old Active Products building), and structural and energy analysis
(Masonic Lodge).
Experiences with community spaces range from the Gas City 2nd Street Promenade and Senior Community
Centers (Gas City) to aspects of community centers within church facilities (New Hope Baptist, Grant County
Presbyterian, Cornerstone Christian Fellowship as well as some of the historical buildings mentioned previ-
ously) and restaurants (Payne’s Frozen Custard.)
Numerous projects have provided experience with other essential technical expertise including environ-
mental review (Bio-Diesel Facility Design, Drawings and Permitting), Life Safety Plans (Park Villa L.T.C.), site
planning and space assessment issues (I-69 Industrial Park) and large scale structural engineering (Madison
Park Church of God in Anderson.)
The following pages show a sampling of the projects Crandall Engineering has had the pleasure of partici-
pating in. At all times, Crandall Engineering is sensitive to budget and time constraints. New Hope Baptist,
Gas City Methodist and Eastbrook Administration building and Van Buren School addition are a few that
were under specific, tight budgets as well as significant time restraints. Crandall Engineering was able to suc-
cessfully meet both criteria on these and other projects.
Crandall Engineering, Inc. 9

12. Crandall Engineering, Inc.
Statement of Qualifications
Dr. Rosenthall Orthodontics
3901 N Wheeling, Muncie, IN
Relevance: Structural design and con-
sultation for an addition to an existing
building structure
Consultation regarding structural
system, load calculation, and founda-
tion design. In working with a local
architect in the addition and construc-
tion of the existing offices for Dr.
Rosenthall in Muncie, Indiana.
Contact: Ms. Susan Johnson or
Dr. Rosenthall
Culver’s of Marion
2301 S. Western Ave, Marion, IN
Relevance: New construction including
structural and site engineering.
Design of the building per corporate
standards while working with the client to
create this new construction building. De-
sign of the exterior of the building as well
as engineering of the site and structural,
mechanical, and complete design of the
building its self.
Contact: Mr. Jim Swan
10

13. Crandall Engineering, Inc.
Statement of Qualifications
Historic Ann Shop and McDonough Pharmacy
Now the Crandall Offices
234 and 236 E. Main Street, Gas City, IN
Relevance: Historical renovation; structural evaluation of
historic building.
Interior renovation of 2,000 square feet of office build-
ing built in 1893. Interior work, when complete will in-
clude exposure of “Gas City – Queen of the Gas Belt”
painted mural, prescriptions sign and brick walls. This
project could possibly serve as a model for appropriate
rehabilitation techniques including code-compliant
egress, fire protection, and combining upper floor space
for residential occupancy to supplement retail ground
floor use. This will hopefully be the first example of a
mixed-use rehabilitation of a series of buildings in down-
town Gas City.
Historic Montgomery Ward Department Store
Proposed New Venture Ministries
141 E. 3rd Street, Marion, IN
Relevance: Structural evaluation of historic building;
community center within a church
Interior structural evaluation and repair of a 19,000
square foot department store building built in the early
1900’s. Interior evaluation includes supporting a col-
lapsing 2nd floor section of the building, adding a stair-
way access for egress means from the basement and
the 2nd story and conducting a space assessment for the
needs of the new downtown youth ministry.
Contact: Mr. Dennis Roach
11

14. Crandall Engineering, Inc.
Statement of Qualifications
King’s Academy
Historic J. C. Knight School
Jonesboro, IN
Relevance: Feasibility Study Proposal;
Exterior and interior renovation proposal to house
the increased school capacity. The building renovation
would be an exciting event for the community.
Community School of the Arts/Titan Building
Marion, IN
Relevance: Historic reuse and remodel;
This project was proposed to change the use of
the historic building, once a furniture store, into a
community school of the arts.
Contact: Mr. Wayne Seybold
Mr. Mark Fausner
Historic McMahan-Leib Co. Building
Anderson, IN
Relevance: Structural remediation, historic reuse
and remodel;
Originally a wholesale grocery, the circa 1913
building has been structurally compromised.
Structural remediation drawings, calculations,
and scope of work have been approved by the
state and City to save the building once slated
for demolition.
12

15. Crandall Engineering, Inc.
Statement of Qualifications
Baldwin Place
Marion, IN
Relevance: Exterior remodeling, structural analysis;
Through extensive exterior remodeling involved significant structural improvisations to change a dated strip
mall into a thriving center of commerce for the area and reinvigorating a large portion of the surrounding busi-
nesses.
Marion Steel Fabrication – Engineering and Design Center
Marion, IN
Relevance: Enhancing a historically significant building; structural evaluation; remodeling
Exterior and interior renovation and addition for this downtown office gives the building a totally new and
exciting look. The existing structure will be re-configured to remove a section of the existing roof to install a new
90 foot long glass dome in the middle of the building extending from the front to the back. Space assessment
evaluated needs for engineering, purchasing and administrative functions. The facility will be updated to achieve
ADA compliance.
Old Active Products Building
Marion, IN
Relevance: Historic factory structural evaluation; addition and renovation to historically significant building;
Exterior and partial interior renovation to house a new office for the current tenants of this old factory. The
building remodel will give this part of town a new look.
Contact for projects on this page: Mr. Jim Swan
13

16. Crandall Engineering, Inc.
Statement of Qualifications
Historic Marion Masonic Lodge
Marion, IN
Relevance: Historic building structural evaluation /
energy analysis; construction repair cost analysis; op-
erating cost analysis.
A structural and energy evaluation was performed
on this old downtown building to evaluate the feasi-
bility to make needed repairs or to build a new build-
ing at another site. The study was presented to the
Masonic Lodge board. Repairs are beginning to be
made to the exterior brick work.
Contact: Mr. Bill Henry
Gas City 2nd Street Promenade
Marion, IN
Relevance: Governmental client, public project, his-
torical context;
Through research and knowledge of the city, the
Gas City 2nd Street Promenade creates a focal point
for the citizens of Gas City to gather and a point of
interest for those who visit the city.
Contacts: Mr. Larry Leach/Mr. Henry Olynger
YWCA Mentoring Mothers
Historic Thornburg House
Marion, IN
Relevance: Historic structural evaluation; renovation
to historically significant building;
Remodel and design of an old mansion to become a
group home for the YWCA Mentoring Mother pro-
gram. This included functions such as sleeping resi-
dences, teaching facilities, study rooms, child care fa-
cilities and a store. Work was accomplished using vol-
unteer help from inmates at the local jail under the su-
pervision of the sheriff’s department. The house has
since become privately owned.
14

17. Crandall Engineering, Inc.
Statement of Qualifications
Gas City Senior Community Center
Relevance: New construction community
center, site development
A preliminary site plan and floor plan
for a new Gas City Senior Community
Center has been submitted to the park
board. The facility includes a high school
sized basketball court or 2 half-courts,
classrooms, restrooms, locker rooms, of-
fices and a kitchen/concession area. The
project is awaiting further direction.
Contact: Mr. Cornell Atkinson
New Hope Baptist Church
Gas City, IN
Relevance: Feasibility study; construction cost estimates; community center within a church; sanctuary
Working with various committees, a needs list was generated for the addition. The design included a new
sanctuary: a 660-person pew capacity and 240 seat overflow capacity. The addition included a new class-
room wing with future classrooms in a second story. Remodeling included turning the existing sanctuary
into a new fellowship hall with a new kitchen and restrooms. Approximate additional space is 14,000 square
feet with a cost of $1,180,000.
15

18. Crandall Engineering, Inc.
Statement of Qualifications
Grant County Presbyterian Church
Jonesboro, IN
Relevance: Feasibility study; construction cost estimates; presentation of design and costs to congregation;
community center within a church
Working with the Pastor and various committees, a needs list was generated for a new facility. After much
discussion, three (3) different options were designed with construction estimates for each design.
Contact: Pastor Lyle Ewing
Cornerstone Christian Fellowship
Bloomington, IN
Relevance: Community within a church; economical construction; fire separation
Working with the Pastor and various committees, a needs list was generated for an addition to their facility.
Four (4) different floor plans were proposed to the church for the new office, multi-purpose room, kitchen,
restroom, and basement storage and mechanical areas.
16

19. Crandall Engineering, Inc.
Statement of Qualifications
Payne’s Frozen Custard
Gas City, IN
Relevance: Community; Restaurant
A restaurant design for a local developer to bring new business to the community. This is a hot spot for
Indiana Wesleyan and Taylor University students. The new 1200 square foot building cost approximately
$270,000 to build.
DeHart Farms Bio-Diesel
Trafalgar, IN
Relevance: State Level and Environmental Review and Environmental Permitting
An experimental bulk reduction and bio-diesel production facility is in design and under construction. If
the processes are successful, they will be patented and other facilities will be built. Drawings, processes and
permit applications are filed with the Indiana Department of Environment. Construction cost is about
$500,000.00
Park Villa L. T. C.
121 N. Washington Street, Marion, IN
Relevance: Life Safety Plan; ADA Compliance; Department of Health
Requirement must be met for public safety and evacuation in all public facilities. Drawings and processes
are filed with the Indiana State Department of Health for their approval to occupy a building.
17

20. Crandall Engineering, Inc.
Statement of Qualifications
Madison Park Church of God
Anderson, IN
Relevance: Structural Steel Engineering
Provided structural engineering for the new construction of a 74,000 square foot church facility as part of
a design-build project for KR Montgomery architects and Marion Steel Fabrication.
Contact: Mr. Jim Swan
I-69 Industrial
Office Park
Marion, IN
Relevance: Site Planning; Space Assessment
A seven (7) acre site will be utilized for an industrial complex consisting of 2 heavy industrial buildings, 4
light industrial buildings and 4 office buildings. The industrial office park includes a retention pond, site utili-
ties, parking facilities to service the various buildings. Total square feet is approximately 239,000. project cost
is $20 million.
Contact: Mr. Jim Swan
18

21. 4
Chapter
Staff
Name Position/Duties Length of Experience
Lisa Crandall, MSME, PE Structural, Mechanical, Civil, and Architec- 25 years
tural Engineering
Christopher Alexander, M.Arch M.Arch, CAD Drafting, 3D Visualization, 2 years
Graphic Design
Caleb Crandall, BA Project Management, Administration, Fi- 5 years
nancial, Marketing, Community Involve-
ment
Kurt McCall Project Manager 5 years
Michael Westfall, BS, EIT BS in Civil Engineering, CAD Drafting, 25 years
additional engineering tasks
Don Wimmer, PLS Surveyor 20 years
Becky Shildmyer Administrative and Secretarial 22 years
Bradley Kline Architectural Design, CAD Drafting, Civil 15 years
& Site Layouts, surveying
Ben Crandall, RN, PHD, (ABD) Consultation for health care and educa- 26 years
tional facility design
Tiffany Woodard Bachelor in Religion, Photoshop, details,
design, administration
Jana Griffin, BS BS in Interior Design, CAD Drafting, 1 year
graphic design programs
Organization of Crandall Engineering is centered around the principal of the company, Lisa Crandall, PE.
Crandall is assisted by a graduate architect, a civil engineer-in-training, and an interior designer. Other engineer-
ing staff is consulted on an as-needed basis. The engineering staff is supported by a project manager and an ad-
ministrator/secretary.
Crandall Engineering, Inc. 19

22. LISA M. CRANDALL, MSME, PE
EDUCATION:
1989, MSME, University of Tulsa, Tulsa, OK. Thesis title “An Investigation of the Local Strain Ap-
proach for Evaluating Notch Fatigue in 8620 Cast Steel”
1984, BSME, University of Tulsa, OK.
PROFESSIONAL REGISTRATIONS:
1986 Professional Engineer registered in the state of Oklahoma
1995 Professional Engineer registered in the state of Indiana
1999 Professional Engineer registered in the state of Kansas
2006 Professional Engineer registered in the state of Alabama
2006 Professional Engineer registered in the state of Mississippi
2006 Professional Engineer registered in the state of Kentucky
2007 Professional Engineer registered in the state of Ohio
2007 Professional Engineer registered in the state of Michigan
2007 Professional Engineer registered in the state of Missouri
2007 Professional Engineer registered in the state of Texas
2008 Professional Engineer registered in the state of Louisiana
2009 Professional Engineer registered in the state of Tennessee
2009 Professional Engineer registered in the state of Massachusetts
2009 Professional Engineer registered in the state of Nebraska
2010 Professional Engineer registered in the state of Pennsylvania
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
2009 Marion National Veterans Cemetery
Marion, IN
Construction Inspection Services for Historical building restoration and site work
On-site construction inspection services for a Minnesota Engineering firm for site utility construction, new road
construction, road repairs, historic brick building restoration, and new building construction.
2009 Thompson-Ray House
Gas City, IN
Architectural Engineering for State Historical Building Restoration (HPF grant received)
Construction drawings and specifications for restoration of historical home on Main Street in Gas City. Section 106
Part I has been approved. Part 2 and Part 3 will be completed during the restoration process.
2009 Cardinal Greenway
Muncie, IN
Structural Engineering-Martindale Pedestrian Bridge
Structural engineering of pedestrian bridge abutments. Foundation system was a pile system with concrete caps.
2008-2009 Culver’s
Marion, IN
Design of building and site for new construction
Design of the site for new construction of the restaurant and the changes to the site in accordance with
local zoning requirements and laws to achieve the best option for the restaurant
Crandall Engineering, Inc. 20

23. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
2009 Lamplight Manor
Brazil, IN; Mt. Vernon, IN
Design and restoration of existing multifamily housing
72 units were rehabilitated for the ICHDA Tax Credits.
2009 YMCA
Marion, IN
Renovation of pre-existing structure for reuse
What once was the Historic Marion YMCA has been converted and renovated to accommodate new business with the
upper levels being devoted to a hotel for a TIF funding proposal
2009 Eastbrook Community Schools
Marion, IN
Bid Specifications
Writing bid specifications for bond projects.
2009 Marion Incubator/Titan Building
Marion, IN
Renovation to existing historic building for reuse
Proposed change of use for historic building, once a furniture store, into a new incubator site to house emerging busi-
nesses in the area.
2008 Historic Downtown Blumenthal’s/JCP
Marion, IN
Renovation design study for change of use of historical building
Proposed change of use for historic building originally the Blumenthal’s Department Store and later JC Penny’s info
offices on the lower level and condominiums on the upper levels.
2008-2009 Historic McMahan-Leib Co. Building
Anderson, IN
Structural remediation to save an historical building
Originally a wholesale grocery, the circa 1913 building has been structurally compromised. Structural remediation draw-
ings, calculations, and scope of work has been approved by the State and City to save the building once slated for
demolition.
2008-2009 Baldwin Place
Marion, IN
Structural analysis and design of historical strip mall
Major exterior remodeling involving significant structural improvisations to change a dated strip mall to be used once
more.
2008 Westview Detention Pond
Jonesboro, IN
Aquatic engineering and design of detention pond
Detention pond designed for school system to alleviate storm water load on the city of Jonesboro.
Crandall Engineering, Inc. 21

24. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
2008-2009 2nd St Promenade
Gas City, IN
Revitalization of 2nd St Promenade area
Historical research and rehabilitation used to reinvigorate and instigate excitement for the 2nd Street Promenade and the
Government buildings located in downtown Gas City.
2008 Taylor University
Upland, IN
New Nussbaum Science Building- structural steel value engineering (Team)
Structural engineering consultation to the university of the new science building atrium. The 6,800 square foot atrium
project is part of the new science teaching facility. My collaboration is working for the university as part of a design
build project for the Troyer Group (architects.) the construction is placed between the existing science building and the
new science building. The design includes a partial brick exterior, glass walls and roof, connecting walkways, two levels
with balconies, glass elevators, structural steel beams, and columns with joists and girders. Other specialty aspects for
LEED design include insulating roof panels, rotating roof louvers and mirrors for solar power, geothermal heating and
a small rooftop greenhouse..
2008 Taylor University
Upland, IN
New Nussbaum Science Building Design Consultation (Team)
Design consultation for the university of the new science building and addition. In particular, working with the faculty
and students on special engineering projects related to the LEED design. These design projects include; renewable
fuel investigation of methane gas recovery from a waste system digester, cogeneration of electricity for university use
and selling back to the grid, grey water system design, heliostat co-functionality with an observatory dome, wind and
solar electrical power generation, trombe windows, atrium design, green roof, geothermal heating, roof louvers and mir-
rors and other LEED initiatives.
2008 Naples Indy Bulk, LLC
Naples, FL
Cost Study of Biodiesel/Green Diesel Plant Construction
A preliminary design and cost study for construction of a biofuel plant using animal waste as feedstock. A cost/
payback comparison is being made between a biodiesel facility using transesterfication versus a green diesel jet fuel fa-
cility using hydrogenation/cracking.
2008 Advanced Bulk, Inc.
Greenville, PA
Structural steel design for Bulk Loading Facility
Design of steel building, stairway, and walk platform for equipment and work area for bulk loading of materials into rail
cars.
2008 Naples Indy Bulk, LLC
Indianapolis, IN
Cost and Feasibility Study of Bulk Plant Conversion to Biodiesel
A feasibility cost study of converting an oil bulk storage plant to a biodiesel bulk storage plant and repair of a 216,000
gallon oil tank.
Crandall Engineering, Inc. 22

25. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
2008 Buds to Blossom (Commercial Greenhouse)
Marion, IN
Design and Certification of Commercial Mound Septic System
Design of a mound type septic system for certification from the Indiana State Department of Health.
2007 Eastbrook Community Schools
Marion, IN
New High School Press Box Design
Design of a 2-story press box for the track and football fields. The design enlarged the existing area and added a sec-
ond story, incorporating a restroom and hospitality area, as well as new stairs to grade. Structure was steel with metal
siding.
2007 Taylor University
Upland, IN
LEED Consultation – New Nussbaum Science Building
Design consultation for the university of the new science building and addition. In particular, working with the faculty
and architects to evaluate the feasibility to proceed with LEED certification. Projects considered; renewable fuel in-
vestigation, cogeneration of electricity, grey water systems, a heliostat, wind and solar electrical power generation,
trombe windows, atrium design, green roof, geothermal heating, roof louvers and mirrors and other LEED initiatives.
2007 Morgan County Public Library (Marion Steel)
Marion, IN
Structural Steel Design
Design of special bow trusses for library roof.
2007 Tippecanoe Shopping Center/Burlington Coat Factory
Lafayette, IN
Structural Steel Design
Design of shopping center steel structure for Dauss Architects. Designed the steel for another shopping center struc-
ture in Anderson, IN.
2007 Habitat for Missionaries
Marion, IN
Design and Certification of Commercial Septic System
Design of a septic system for certification from the Indiana State Department of Health. The commercial system was
for a seasonal RV site.
2007 Trio Development
Marion, IN
Historic Old Active Products Factory – Office addition
Design of office addition to the old Active Products factory is to include exterior enhancements.
2007 Park Villa L.T.C.
Marion, IN
Life Safety Plan
Requirements must be met for public safety and evacuation. Drawings were created for this existing structure and
processes are filed with the Indiana State Department of Health for their approval to occupy a building.
Crandall Engineering, Inc. 23

26. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
2007 DeHart Farms Bio-Diesel
Trafalgar, IN
Bio-Diesel Feasibility Study
An experimental bulk reduction and bio-diesel production facility is in design and under construction. If the processes
are successful, they will be patented and other facilities will be built. Drawings, processes and permit application are
filed with the IDEM. Construction cost is about $500,000.
2007 New Venture Ministries
Marion, IN
Historic Montgomery Ward Department Store – Youth Ministry
A structural evaluation of the 19,000 square foot building built in the early 1900’s revealed some substantial work was
necessary to safely occupy the entire structure. Interior work included supporting a collapsing 2nd floor section of the
building, adding a stairway access for egress means from the basement and the 2nd floor and conducting space assess-
ment for the needs of the new downtown youth ministry.
2007 Gas City Parks Department
Gas City, IN
Gas City Senior Community Center
A preliminary site plan and floor plan was designed for submittal to the park board. The facility includes a high school
sized basketball court or 2 half-courts, classrooms, restrooms, locker rooms, offices and a kitchen/concession area..
2006-2007 Wabash Alloy
Tipton, IN
Office and Locker Room Facility
Design of an approximately 5,500 square foot, Type “B” occupancy building. New building includes offices, locker
rooms, ADA restrooms, a conference room, laboratory and disaster recovery facility. Project cost approximately
$618,000.
2006-2007 Swan Real Estate
Marion, IN
Historic Significant Building - Office Renovation and Addition
Design of a 12,000 square foot office building. Exterior accents include a 90 foot long glass dome, brick and stone ex-
terior. Approximate project cost is $1.5 million.
2006-2007 Trio Development
Marion, IN
Industrial and Office Park
Design of heavy industrial, light industrial and office buildings on a 7 acre parcel. Park includes a retention pond, site
utilities, parking facilities to service the various buildings. Total square feet is approximately 239,000. Project cost $20
million.
2006-2007 Cornerstone Christian Church
Bloomington, IN
Multi-Purpose Facility
Design of an 8,000 square foot multi-purpose facility. New Building includes offices, kitchen, ADA restroom,
a large multi-purpose room and basement storage. Project cost approximately $520,000.
Crandall Engineering, Inc. 24

27. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
2006 Grant County Presbyterian Church
Marion, IN
Feasibility Study
Design concepts for 3 different styles of worship facilities for congregation to consider prior to building.
2006 King’s Academy
Jonesboro, IN
Historic J.C. Knight School - Feasibility Study
Proposal to renovate the interior and exterior of the old school to house the increased school capacity.
2006 Indiana Wesleyan University
Marion, IN
Sports Complex
Structural and MEP engineering provided to contractor for design-build of a 75,000 square foot indoor track with of-
fice and locker room facilities. Project cost approximately $7 million.
2006 Lakeview Christian Church
Marion, IN
Multipurpose Facility
Structural engineering provided to architect for a large multipurpose kitchen and community area addition to
their existing building. Addition was 17,000 square feet.
2006 Crandall Offices
Gas City, IN
Historic Renovation of 1893 Downtown Building - Office
Interior renovation of the Ann Shop and McDonough Pharmacy in downtown Gas City. Interior work, when com-
plete, will include exposure of “Gas City – Queen of the Gas Belt” painted mural, prescriptions sign and brick walls.
This project serves as a model for mixed-use rehabilitation of downtown buildings.
2006 Madison Park Church of God
Anderson, IN
Church Facility
Structural engineering provided to the architect for a new 74,000 square foot church facility. Project cost approximately
$9 million.
2005 City of Marion, IN
Marion Steel Fabricators, Marion, IN
64’ x 94’ Skate Rink Canopy Cover, Skate Rink Handrails and Rink Deck
Design of a portable aluminum truss frame cover, which can be assembled by bolting together. The roof is raised up
using chain winches. The skate rink, handrails and deck all dis-assemble for removal so the park can be used for other
events. Used RISA, a FEA (Finite Element) program to optimize the aluminum tubing sizes.
2005 Marion Steel Fabricators
Marion, IN
Truck Loading Docks, Retaining Wall and Compressor Room
Design of a 6-loading/unloading-station truck dock, compressor foundations and compressor building of a factory re-
Crandall Engineering, Inc. 25

28. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
hab for the expansion of the Marion Steel Fab plant. Project size $20 million.
2004/2005 Eastbrook Community School Corporation
Marion, IN
Administration Building Addition
An approximately 2,040 square feet addition to the administration building is designed to include a new office, confer-
ence room, hospitality room, ADA restrooms, records storage, school board meeting room, public restrooms for sport-
ing events and a concession area. Cost was approximately $230,000.
2004/2009 Numerous Mortgage Companies
Throughout Central and Northern Indiana
HUD Manufactured Home Foundation Inspection Certifications
Inspection and certification of manufactures homes per the September 1996 HUD Permanent Foundations Guide for
Manufactured Housing.
2004 Masonic Temple
Marion, IN
Building Repair Study
The 1912 structure was evaluated to determine necessary repairs and costs to the 10,500 sq. ft. infrastructure to provide
the membership a worthy facility for the next 30 years. Project size approximately $336,000.
2004 Payne’s Custard at the Lightning Bug Cafe
Marion, IN
Restaurant Design
A new 1200 sq. ft. restaurant/cafe design. Cost approximately $270,000 including site work.
2004 Mary Allen Roush Estate
Marion, IN
Force Sewer Main
A residence needed a new lift station, air release valve pit and a 2” force sewer main to tie into another force main.
Construction completed in June 2004.
2001-2003 New Hope Baptist Church
Gas City, IN 46933
Church Addition and Remodeling
Design of a new Sanctuary for 660-person pew capacity and 240 seat overflow capacity. The remodeling involves add-
ing a new sanctuary, adding a new classroom wing with future classrooms in a second story and turning the existing
Sanctuary into a new fellowship hall with a new kitchen and restrooms. Approximate additional space is 14,000 square
feet. Estimated cost for the addition is $1,180,000.
2001 & 2003 Fire Station No. 1
Marion, IN 46952
Remodeling
Phase 1 repairs made to concrete, brickwork, windows and structure. Cost of the remodeling was $32,723. Project
construction was complete in April 2001. Phase 2 repairs to interior in the design stages in fall 2003 were cancelled due
to election year changes and budget. Budget was $75,000.
Crandall Engineering, Inc. 26

29. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
2002 Fire Station No. 6
Marion, IN 46953
Remodeling
Designed the new porch, parapet and EFIS covering on the front of the station, made drawings and wrote a specifica-
tion for the project to be bid and constructed. Cost of the remodeling was $74,000.
2000 Thornburg House (YWCA)
Marion, IN 46953
Remodeling
Remodel-design of an old mansion to become a group home for the YWCA Mentoring Mother program. This in-
cludes functions such as sleeping residences, teaching facilities, study rooms and a store. Project canceled due to lack of
funding.
1999 Olathe, Kansas
Food Processing Plant and Warehouse
My responsibility was to design all the foundations and all the structural steel for the construction of an 184,000 square
foot food processing plant and warehouse located in Kansas. Utilized RISA-3D (a structural Finite Element Analysis)
for the frame design and a special analysis of a field retrofit of a SJI girder. Design included process mezzanines for
food processing equipment and storage tanks. Estimated cost for the steel alone was $2,000,000.
1999 Kokomo, IN
Housing Plot
Sub-division of a 40-acre land parcel into house plots. Prepared the preliminary road and plot layout for submission to
investors. The project was canceled.
1997 First United Methodist Church of Gas City
Gas City, IN 46933
Church Addition
Complete design and construction drawings of the addition of fellowship hall, kitchen and basement classrooms to
their existing facility. The addition was 6,200 square feet. The cost of the addition was $350,000.
CONTRACTING AND JOBS EXPERIENCE
9/95 - 2007 General Motors Corporation, Metal Fabrication Division
Marion, IN 46952
Quality Network Planned Maintenance Salaried Support (1/03- 06)
My responsibility is leading a group of task forces and hourly skilled trades in the planning and implementation of
processes to improve safety, quality and throughput in the manufacturing facility. This includes all aspects of predic-
tive technologies, specifically vibration analyses, infrared technologies, ultrasound, high speed video, laser alignment
and motor testers. Maintenance planning includes creating preventive, corrective and reactive (emergency) work
orders using MAXIMO, a computer maintenance system, and tracking the work orders in the system and creating
reports for management review.
General Supervisor, Maintenance and Engineering (9/00-12/02)
My most important task was to plan and provide the manpower necessary to keep production running and to com-
plete projects and preventive maintenance tasks. My responsibility was over maintenance and engineering activities
on second shift. I managed manpower especially during crisis management.
Crandall Engineering, Inc. 27

30. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
Group Leader, Senior Manufacturing Engineer (9/95-9/00)
My responsibility was to support production by implementing and managing projects to increase throughput, reduce
line change over times, improve ergonomics and reduce safety hazards. My responsibility included mechanical sup-
port for maintenance and troubleshooting of automation and other mechanical devices. I planned and managed
projects to complete the installation and start up on time. This meant working with the maintenance department to
guide the manpower necessary to complete the tasks, and obtaining manufacturing and installation drawings and
procuring materials through purchasing. I was responsible for the installation of the presses and automation equip-
ment for the modernization of 4 major press lines.
3/2004 - 5/2006 Tucker Career & Technology Center
Marion, IN. 46952
Adjunct Instructor
I taught Apprenticeship Training, for candidates to enter the skilled trades. Class focuses on basic algebra, physics and
English skills.
7/93 - 9/95 Continental Design Co., Inc. (On Contract to General Motors Corporation)
Anderson, IN 46016
FEA Engineer
My responsibility was for the development of Computational Fluid Dynamics (CFD) as an effective tool for the analy-
sis of air around and through headlamps for General Motor’s vehicles. Analytical work was compared to test results. I
developed a plan using CFD to more reliably predict success of critical headlamp design parameters. I wrote a design
manual for effective humidity evacuation of headlamps. I used FEA to study the thermal effects on tail lamps and for
structural and frequency analysis of brackets and headlamp assemblies.
3/90 - 7/93 Dowell Schlumberger relocated to:(reason I left) P.O. Box 4610
Tulsa, OK. 74102 Houston, TX.77210
Project Leader/Development Engineer
Dowell Schlumberger designs and manufactures state of the art oil field equipment. I was in the research and develop-
ment organization. I had both technical and management responsibilities as a project leader for a skid-mounted unit
designed to mix, pump and meter raw acids and other corrosive fluids. There were 2 mechanical engineers, 3 software
engineers, 1 designer and 1 shop hand working for me on this project. My annual budget was $1.5 million. My man-
agement responsibilities were the work breakdown schedules, manpower projections, and project and annual budget
plans. My technical responsibilities included the overall system design, the process flow diagrams, the piping system,
the manual override on the valves, pump selection, and certification with the Coast Guard regulations for offshore use.
My responsibility also included fabrication and testing of the prototype unit.
I also developed a down hole rubber seal using Finite Element Analysis (FEA) for large displacement and large strains.
I was responsible for testing the parts. After the first “proof-of-concept” design, I designed a family of nine parts and
wrote a manual for designing future parts without using FEA.
9/90 - 5/93 Tulsa Junior College, Northeast Campus
3727 East Apache
Tulsa, OK. 74115-3151
Adjunct Instructor
I taught Introduction to Engineering and Physics II and the corresponding Physics II lab.
Crandall Engineering, Inc. 28

31. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
8/84 - 3/90 Crosby-McKissick
P.O. Box 3128
Tulsa, OK. 74101
Chief Engineer
Crosby-McKissick manufactures a standard line of lifting appliances as well as special swivels, sheaves, crane blocks,
and mooring system equipment. Due to the manpower my job was reviewing and upgrading existing products as well
as designing special application equipment. My design work included structural design and analysis of castings, welded
fabrications, bolted fabrications, sheaves, and specifying bearings and other components to be supplied by outside ven-
dors. I performed FEA on weldments and castings. I wrote a program for calculating fatigue life from FEA stress
analysis results. McKissick had an MRP system for product manufacturing and implemented SPC for product im-
provement. I have worked with certifying agencies such as ABS, API, DNV, RINA and Lloyd's by submitting formal
calculations and coordinating Quality Control Procedures with outside inspectors. I worked on standards and proc-
esses to obtain 'type approval' with API and DNV similar to ISO 9000 certification.
5/84 - 8/84 Rockwell International Corporation
P.O. Box 582808
Tulsa, OK. 74158
Member of Technical Staff
Rockwell in Tulsa designs and manufactures components of the B-1 bomber. My job was solving the various problems
set forth in engineering change orders. I was also involved in the redesign of the flaps (composite structure) and in the
layout of the radar absorption material.
3/80 - 4/84 R.L. Frailey, Inc. (now out of business)
Tulsa, OK. 74170
Engineering Technician/Designer
Frailey was an engineering and construction firm of various gas plant facilities. My job was originating mechanical flow
diagrams from process flow diagrams, pipe stress analysis, sizing flare stacks, plot plan layouts, cryogenic plant design
involving looking at pressure loss and flow pockets in piping, pipe wall thickness calculations, waste heat boiler design,
steam coil in sulfur pit design and reading customer specifications to ensure that our design met specifications.
4/79 - 2/80 RSC-Williams Brothers
and 6600 South Yale Avenue
3/76 - 12/77 Tulsa, OK. 74136
Senior Pressure Piping Designer
William’s Brothers is an engineering and construction firm of waste treatment facilities, pipeline pump stations, pipe-
lines, and gathering stations for natural gas. My job was pressure piping layout and plot plan layout for the above facili-
ties. I coordinated drawings for a gas gathering facility being responsible to supply work for 6 draftsmen, checking the
drawings, and investigating customer specifications for our compliance. I was responsible for some pipe stress analysis.
1/78 - 4/79 Delta United Corporation (now out of business)
Tulsa, OK.
Designer - Piping, Elect., Instr., and Struc.
Delta United were designers and fabricators of lube-oil skids and fabricators of instrument skids, nuclear wastewater
treatment skids, process skids and others. My job was designing the piping, electrical, instrumentation, and structural
components for different skids. I made small pressure vessel calculations for head and wall thickness and nozzle rein-
forcement. I designed the electrical systems per the latest NEC specifications. I designed pump base plates for struc-
Crandall Engineering, Inc. 29

32. LISA M. CRANDALL, MSME, PE
A SAMPLE OF PROFESSIONAL ARCHITECTURAL/ENGINEERING EXPERIENCE:
tural rigidity. I designed a large rectangular lube oil reservoir. I also designed structural steel skids and the pipe support
systems on those skids. I originated the design of the instrument control systems.
1/74 to 2/76 Fluor Engineers & Constructors
3333 Michelson Drive
Irvine, CA. 92730
Piping Designer
Fluor is a major engineering and construction firm of crude oil refineries. While employed there, I attended classes in
pressure piping, checking and layout, and fired equipment layout. I worked on the Alaska Pipeline pumping stations
and crude refining stations. I worked with a lot of codes including OSHA and the Industrial Risk Insurers General
Recommendations for plot plan design considerations. I also performed piping stress analysis for thermal conditions,
vibrations, and gas/liquid slug flow, piping design of mixed two-phase flow lines, nozzle and tube design for vertical
and box-type heaters.
PROFESSIONAL MEMBERSHIPS, OFFICES AND ACTIVITIES
1987 - 1989 Mechanical Engineering Industrial Advisory Board to
And The University of Tulsa College of Mechanical Engineering,
1991 - 1993 Secretary, 1992-1993 and Chairman, Student Advocacy Committee, 1991-1993
1984 - 2005 The American Society of Mechanical Engineers
Officer Tulsa Chap., History and Heritage Relations, 1991-1993
1988 - 1994 Society of Automotive Engineers, member
1991 - 1994 American Society of Chemical Engineers, Rubber Division
Current Energize—ECI Regional Planning District, regional economic development partnership, Grant County
Appointee
Current Gas City Kiwanis, member
Current Gas City Area Chamber of Commerce, member
Current Grant County Chamber of Commerce, member
Crandall Engineering, Inc. 30

33. C A L E B P. C R A N D A L L , B A
SUMMARY
A highly skilled professional with experience in business and accounting. Highly-motivated to be
part of a business team and a small business owner.
EXPERIENCE
8/2005 – Present Mississinewa Management Inc. Gas City, IN
Owner, Project & Property Management,, Small Business Development and Business Systems Support
Management Team performs operational systems support to small business clients
Perform tax preparation and review using Lacerte & other Intuit Products
Review project / property cash flow and compile un-audited profit and loss statements to help fore-
cast and address financial issues
Construction Accounting & Project Management
Procedural & systems implementation
Property management
Human Resource Management
2002 – 2005 Richard Duffy, CPA, PC Purcell, OK
Tax Accountant, Consultant
Meet with clients to gain understanding of their operations in order to best recommend tax, financial,
or managerial business solutions for phases of construction in residential and commercial projects
Perform tax preparation and review on individual, partnership, Sub-S, and C corporation tax returns
as well as consolidated multi-state returns
Complete monthly, quarterly, semi-annual, and annual reviewed financial statements as well as job
costing, WIP, and audits for construction accounts
Review bookkeeping services for monthly clients including payroll tax computation and un-audited
profit and loss statements to help clients forecast and address financial issues
Work to determine cost effectiveness of investment properties and determining value for new invest-
ments
2000 – 2002 Department of Veterans Affairs Norman, OK
Work/Study Liaison for Montgomery G.I. Bill Applicants
Worked with applicants to administer the enrollment, maintenance, and dispersal of funds for veter-
ans and qualifying dependents under the Montgomery G.I. Bill
Summer 2000 United States Army Reserve Fort Jackson, SC
Advanced Infantry Training (AIT)
MOS in personnel administration specialist, 75B10
Learned the newest technologies for the processing, administering, and modernization of outdated
paperwork on soldier’s files by incorporating the newer systems for documentation of important
material
Crandall Engineering, Inc. 31

34. C A L E B P. C R A N D A L L , B A
EXPERIENCE (cont.)
Summer 1999 United States Army Reserve Fort Knox, KY
Basic Training
Learned the importance of attention to detail, respect for others and self
Learned the way to work at high speed, but with a purpose so as to maximize all the effort put forth
in to the task at hand
1999 - 2004 United States Army Reserve Fort Wayne, IN
Corporal
Personnel Administration Specialist for Headquarters Battalion 1 Brigade/330th Regiment 84th Divi-
sion (IT), Fort Wayne, IN.
Worked with personnel, perform clerical duties, and keep 201 files for soldiers in the battalion as well
as MOB deployment packets for headquarters
1999 - 2000 Bluffton College Bluffton, OH
Departmental Accounting Tutor
Tutored students taking accounting courses at BC for the Accounting department
EDUCATION
2000-2005 University of Oklahoma Norman, OK
Bachelors in Arts, Human Relations
Minor in Accounting and International Business
Treasurer for Student Society for Human Relations
24 accounting course hours
1998 - 2000 Bluffton College Bluffton, OH
Accounting major with a minor in MIS
1998 Mississinewa High School Gas City, IN
High School Diploma
TECHNICAL SKILLS
Lacerte Tax Software
QuickBooks
Microsoft Office Products
PROFESSIONAL MEMBERSHIPS, OFFICES AND ACTIVITIES
Economic Growth Council of Grant County
Main Street Beautification Committee of Gas City
Ray House (Gas City) Committee
Crandall Engineering, Inc. 32

35. CHRISTOPHER ALEXANDER, M.ARCH
SUMMARY
Interim Architect earning experience in the design field. Facilitates design and construction drawings
for clients, working from Preliminary Design to Construction Documents.
EXPERIENCE
5/2009 – Present Crandall Engineering, Inc. Gas City, IN
Interim Architect
AutoCAD building construction drawings
Exterior and interior building design
3D modeling and design
Project/Office management
Summer 2008 CSO Architects Indianapolis, IN
Architectural Intern
Coordination and completion of projects
Assistant project manager
Preliminary design exploration for clients and future clients
Summer 2006-7 Eckert Wordell Architects Kalamazoo, MI
Architectural Intern
Introduction to and increase in proficiency with AutoCAD, Adobe Photoshop, and Google Sketchup
Analyzed and ordered presentation material for client meetings
EDUCATION
2008-2010 Ball State University Muncie, IN
2010 - M.Arch, concentration in Sustainability
2004 - 2008 Ball State University Muncie, IN
2008 - Bachelors of Science in Architecture
Minor in Construction Management
Member American Institute of Architecture Students
TECHNICAL SKILLS
• AutoCAD
• Rhinoceros 4.0
• Flamingo 1.1
• Microsoft Word, Excel, Publisher, Powerpoint
• Adobe Photoshop, InDesign, Illustraztor, Flash, Dreamweaver
• Google SketchUp
• V-Ray for Rhino and SketchUp
• AGI 32 (Lighting analysis software)
• Autodesk RevIt
• 3D Studio Max
• HTML, CSS, Javascript, ActionScript
Crandall Engineering, Inc. 33

36. M I C H A E L W E S T FA L L , B . S . , E I T
SUMMARY
Civil Engineer-in-Training progressing towards licensure. Assists with engineering and CAD
drawings.
EXPERIENCE
2/2010 – Present Crandall Engineering, Inc. Gas City, IN
Civil Engineer-in-Training
AutoCAD building construction drawings
Engineering design and calculations
Summer 2009 Alt & Witzig Engineering, Inc. Fort Wayne, IN
Engineering Technician
Performed ASTM standardized tests including slump, air content, concrete test cylinders, etc.
Operated and Certified with a Nuke Gauge
Communicated with site superintendant to relay test findings and give recommendations
Oversaw site inspections and observation of geotechnical work
Summer 2008 Alt & Witzig Engineering, Inc. Fort Wayne, IN
Engineering Technician
Summer 2007 Alt & Witzig Engineering, Inc. Fort Wayne, IN
Engineering Technician
EDUCATION
2004-2009 Trine University Angola, IN
2009 - B.S. in Civil Engineering
TECHNICAL SKILLS
• AutoCAD
• Solid Works
• Microsoft Word, Excel, PowerPoint
• Right-Suite
• Google SketchUp
• Knowledge of ASTM testing and design
Crandall Engineering, Inc. 34

37. JANA GRIFFIN, B.S.
SUMMARY
Interior Designer assisting in interior design of design projects. Assists with CAD documents.
EXPERIENCE
10/2009 – Present Crandall Engineering, Inc. Gas City, IN
Interior Designer
Interior design of selected projects
CAD work and drawing preparation
EDUCATION
2006-2010 Art Institute of Indianapolis Indianapolis, IN
2010 - B.S. in Interior Design
TECHNICAL SKILLS
• AutoCAD
• Microsoft Word, Excel, PowerPoint
• Adobe Photoshop
• Google SketchUp
Crandall Engineering, Inc. 35

38. BECKY SHILDMYER
SUMMARY
A highly skilled individual proficient in all Microsoft programs.
EXPERIENCE
2008 – Present Crandall Engineering, Inc. Gas City, IN
Administrative Assistant/Office Manager
Data entry, phone operations, production of marketing materials, property management assistance
and general clerical duties.
2006—2008 Kem View Pharmacy Marion, IN
Pharmacy Technician
Responsible for all aspect of dispensing prescriptions. Greeting customers, phone operations, inven-
tory control.
1988—2005 Marion Community Schools Marion, IN
Administrative Assistant/Office Manager
Phone operations, clerical duties, purchasing and book keeping.
TECHNICAL SKILLS
• Microsoft Word, Excel, PowerPoint, Outlook
• Word Perfect
• Database files
Crandall Engineering, Inc. 36

39. WOMEN’S BUSINESS ENTERPRISE CERTIFICATION
Crandall Engineering, Inc. 37