Over pressure of wells during Hydraulic Fracturing jobs can be very costly to Companies. Some examples of cost that could occur are:
Damage to the Customers well and potential lose of future business with that Customer.
Testing and replacement of line iron if exceeded that rating of the iron.
Equipment damage
Down time and standby time
Employees hurt on location.
The document provides installation and calibration instructions for an ICT-LCM load capacity monitoring system. It describes:
1) The main components of the system which include a digital indicator, wiring harness, pressure transducer, and installation manual.
2) How to install the pressure transducer in the vehicle's lifting hydraulic circuit and make electrical connections.
3) A two-step calibration process that involves lifting empty forks to set zero point and lifting a known weight load.
4) How the system displays lifted load weight as a percentage of maximum capacity and alerts when the overload point is reached.
The document provides installation and calibration instructions for an ED2-2X Series SkidWeigh check weighing system with two weighing channels. It describes the components, installation of the pressure transducer and digital indicator, electrical connections, and a calibration procedure to obtain load weight readings within 1% accuracy. Safety precautions are outlined and customer support contact information is provided.
This document provides instructions for installing and calibrating an ED2E-OL SkidWeigh system for weighing loads on lift trucks. The system consists of a digital indicator and hydraulic pressure transducer. Installation involves mounting the indicator and transducer, making electrical connections, and running transducer cables. Calibration is done by lifting empty forks to zero the system, then entering a known load weight lifted to set the scale. The system then displays load weight as a percentage of the vehicle's maximum capacity.
A.A.M. Abdul Hannan is seeking a mid-level job in data entry, customer support, or call center work. He has over 9 years of experience in customer service and operations roles at telecom and IT companies. His experience includes roles as a team leader, customer relationship officer, and customer service executive. He holds a BSS degree in Economics and has received training in leadership and product skills.
El documento habla sobre el metabolismo celular. Explica que el metabolismo está compuesto por procesos catabólicos y anabólicos. Los procesos catabólicos degradan moléculas complejas en moléculas más pequeñas liberando energía, mientras que los procesos anabólicos usan esta energía para construir nuevas moléculas como proteínas. También describe cómo las moléculas como los carbohidratos, proteínas y lípidos son degradadas a sus monómeros constituyentes para luego ser transformadas en mol
The document provides installation and calibration instructions for an ICT-LCM load capacity monitoring system. It describes:
1) The main components of the system which include a digital indicator, wiring harness, pressure transducer, and installation manual.
2) How to install the pressure transducer in the vehicle's lifting hydraulic circuit and make electrical connections.
3) A two-step calibration process that involves lifting empty forks to set zero point and lifting a known weight load.
4) How the system displays lifted load weight as a percentage of maximum capacity and alerts when the overload point is reached.
The document provides installation and calibration instructions for an ED2-2X Series SkidWeigh check weighing system with two weighing channels. It describes the components, installation of the pressure transducer and digital indicator, electrical connections, and a calibration procedure to obtain load weight readings within 1% accuracy. Safety precautions are outlined and customer support contact information is provided.
This document provides instructions for installing and calibrating an ED2E-OL SkidWeigh system for weighing loads on lift trucks. The system consists of a digital indicator and hydraulic pressure transducer. Installation involves mounting the indicator and transducer, making electrical connections, and running transducer cables. Calibration is done by lifting empty forks to zero the system, then entering a known load weight lifted to set the scale. The system then displays load weight as a percentage of the vehicle's maximum capacity.
A.A.M. Abdul Hannan is seeking a mid-level job in data entry, customer support, or call center work. He has over 9 years of experience in customer service and operations roles at telecom and IT companies. His experience includes roles as a team leader, customer relationship officer, and customer service executive. He holds a BSS degree in Economics and has received training in leadership and product skills.
El documento habla sobre el metabolismo celular. Explica que el metabolismo está compuesto por procesos catabólicos y anabólicos. Los procesos catabólicos degradan moléculas complejas en moléculas más pequeñas liberando energía, mientras que los procesos anabólicos usan esta energía para construir nuevas moléculas como proteínas. También describe cómo las moléculas como los carbohidratos, proteínas y lípidos son degradadas a sus monómeros constituyentes para luego ser transformadas en mol
This document discusses types of polynomials including constant, linear, quadratic, cubic, and bi-quadratic polynomials. It defines a zero of a polynomial as a real number where the polynomial equals 0. Geometrically, linear polynomials intersect the x-axis at one point, quadratic polynomials form parabolas that can open up or down, and cubic polynomials can have up to three zeros where they intersect the x-axis. Polynomials are used in engineering, economics, physics, and industry to model and describe real-world phenomena like roller coaster curves, price variations over time, energy and voltage differences.
La endodoncia es un tratamiento odontológico que consiste en la extirpación de la pulpa dental y el posterior relleno y sellado de la cavidad pulpar con un material inerte. Se aplica a piezas dentales con caries profundas o fracturas que afectan la pulpa, con el fin de evitar el doloroso proceso de inflamación del nervio y la posterior pérdida del diente. La endodoncia se realiza en varias fases: acceso a la cámara pulpar, instrumentación y limpieza de los conductos radiculares,
Este documento presenta el caso de una mujer de 32 años con una lesión nodular no dolorosa de 2 cm en la glándula tiroides. Las pruebas de imagenología mostraron un nódulo de 2 cm en el lóbulo derecho. Luego de la extirpación quirúrgica, el análisis microscópico determinó que se trataba de un adenoma folicular con células que presentaban aspecto oncocítico o de Hürthle, que es considerado generalmente como una neoplasia benigna. Se recomienda mantener vigil
O documento apresenta as seguintes informações essenciais:
1) Aprova as NBC TP 01 e NBC PP 01, que estabelecem regras e procedimentos para a realização de perícias contábeis no âmbito judicial, extrajudicial e arbitral.
2) Define conceitos como perícia contábil, laudo pericial, parecer pericial e as atribuições dos peritos-contadores e peritos-contadores assistentes.
3) Estabelece diretrizes sobre a execução de perícias, tais como planejamento, termo de dilig
La inflamación puede ser aguda o crónica. La inflamación aguda implica fenómenos alterativos y exudativos vasculares con la llegada de neutrófilos, mientras que la inflamación crónica implica fenómenos exudativos celulares con macrófagos y linfocitos que pueden causar destrucción tisular. Ambos tipos de inflamación intentan reparar el tejido dañado a través de mecanismos como la angiogénesis y la fibrosis.
La rodilla presenta varias pruebas para evaluar su funcionamiento. La inspección evalúa deformaciones y tamaño del liquido sinovial. La movilidad se mide en grados de extensión, flexión, rotación interna y externa. La palpación incluye signos como el choque rotuliano y cepillo rotuliano. Pruebas como Steinmann, cajón anterior/posterior, y pívot evalúan ligamentos. Flexión con rotación interna/externa analiza meniscos usando pruebas de McMurray, Appley y Lachman.
El documento describe brevemente la respuesta inmune innata y adaptativa a la infección. Explica que la inmunidad innata es la primera línea de defensa e incluye barreras físicas, moléculas como el complemento y células como los macrófagos y células dendríticas. Luego, la inmunidad adaptativa es más lenta pero específica para el antígeno, involucra linfocitos T y B, y genera memoria inmunológica. Finalmente, resume los pasos de la activación de los linfocitos T
Fire Alarm, Smoke Detector and Automatic Sprinkle SystemKhairul Azhar
This document describes a fire alarm and smoke detector system designed using digital logic. The system uses inputs from an emergency switch, smoke detector, and main switch. It outputs a fire alarm and activates an automatic sprinkler system. The logic design includes OR gates, AND gates, a JK flip flop timer set to 3 seconds, a 1Hz clock, 7 segment displays, and inverters. When the smoke detector or emergency switch is activated, the alarm will sound for 3 seconds before automatically shutting off the sprinkler and alarm. The group's responsibilities for the project are also outlined.
El documento describe los diferentes tipos de instrumental utilizado en operatoria dental. Se clasifica en instrumental activo (cortante de mano y rotatorio), complementario (para examen y preparar el campo operatorio), y para restauraciones. El instrumental activo se usa para cortar tejidos, el complementario para examinar y aislar al paciente, y el de restauraciones para trabajar con materiales como amalgama y resina.
This document provides an introduction to programmatic mobile media buying. It discusses how programmatic advertising has become mainstream, replacing traditional ad sales methods. Programmatic allows automated purchase of ad placements using data to target individuals. It is more efficient than traditional methods as it eliminates human error and delay, allowing optimization of ad inventory and buying in real time. The document is an overview guide to programmatic mobile advertising, covering the basics, different programmatic buying types, using data, and tips for advertisers.
Major Project Report on overheat and smoke detection with GSM module in final year of Undergraduate course in Electronics and Communication Engineering
The document describes DTect-IT, a machine monitoring system from Caron Engineering that uses custom USB sensors to monitor various aspects of CNC machines. It can monitor things like clamping force, spindle power, temperature, bearing health, and more. The system provides limit analysis, fault detection, frequency analysis, and stores all monitored data. It communicates with the CNC machine to provide feedback on conditions and make adjustments if needed. DTect-IT comes with a variety of sensor options and provides intuitive data analysis to help detect issues and enable preventative maintenance for CNC machines and tools.
This document provides instructions for installing and calibrating the RT-LCM high reach truck load capacity monitor. The monitor measures hydraulic pressure to calculate lifted load percentage. It must be installed on the lifting hydraulic circuit and calibrated using empty and known weight loads. Detailed steps are provided for connecting components, performing electrical and pressure transducer installations, and executing the automatic two-point calibration procedure. Safety practices and a general operator usage guide are also included.
The Handheld Satcom Test Source by WORK Microwave is a portable signal generator capable of producing precise reference signals between 50-180 MHz and 950-2150 MHz. It can be used to test high-frequency converters by generating two signals to measure intermodulation distortion. It is also well-suited for calibrating other test equipment like spectrum analyzers due to its adjustable power levels and ability to store settings internally. Testing confirmed it provides accurate readings when used to verify the measurements of a Deviser S7000 TV analyzer.
This document summarizes the WORK Microwave Handheld Satcom Test Source signal generator. It can generate signals from 50-180 MHz and 950-2150 MHz with precision to serve as a reference for measuring complex analog systems. It has two independent synthesizers, allowing it to generate two signals simultaneously for measuring intermodulation of high-frequency converters. Its adjustable output power level from -45 to -5 dBm in 0.5 dB steps enables measuring the 1 dB compression point and conversion gain of converters. The portable generator can operate on its internal battery or via USB, making it a versatile testing device.
This document provides instructions for using Imada digital torque wrenches and testers. It details specifications, operation modes, programming, data output, memory functions, and other features. The warranty covers defects for two years but has restrictions. The manual outlines safety information and proper use of the devices.
The document summarizes a test signal generator called the Handheld Satcom Test Source produced by WORK Microwave. It can generate signals from 50-180 MHz and 950-2150 MHz with precision, making it suitable for calibrating test equipment and measuring parameters of high-frequency converters. The generator has two independent synthesizers allowing it to supply two signals simultaneously for measuring intermodulation. It also allows flexible setting of output levels for measurements like compression point and conversion gain. The generator includes rechargeable batteries, software control, and integrates smoothly with Windows operating systems.
The document summarizes a test signal generator produced by WORK Microwave called the Handheld Satcom Test Source. It can generate signals from 50-180 MHz and 950-2150 MHz with adjustable power levels and is used to test high-frequency converters and measure intermodulation signals and compression points. The generator has two independent synthesizers, rechargeable batteries, and connects to a computer via USB to control sweeps and measurements through easy-to-use software. It provides a robust and portable solution for precision high-frequency testing.
This document provides installation and calibration instructions for the CubeFreight 400 lift truck onboard weighing and dimensioning system. It describes how to install the pressure transducer, digital indicator, pallet height sensor and other components. The calibration process involves lifting empty and known weight loads to automatically calibrate the weighing function. The pallet height sensor is mounted on the mast and its distance to the ground is calibrated. Safety precautions are outlined and technical support contact information is provided.
The document provides instructions for calibrating and using the SP-1000 SkidWeigh Plus on-board vehicle weighing system. It describes how to enter calibration mode by logging in with a password, then calibrating the system by lifting empty forks and a known weight load above the ground. It explains the user mode, including starting a session by logging in an operator ID, taking weight readings by lifting loaded forks, and totaling weights under waybill IDs. Functions of the control keys for weighing, taring, totaling, printing, and ending a session are also summarized.
This document discusses types of polynomials including constant, linear, quadratic, cubic, and bi-quadratic polynomials. It defines a zero of a polynomial as a real number where the polynomial equals 0. Geometrically, linear polynomials intersect the x-axis at one point, quadratic polynomials form parabolas that can open up or down, and cubic polynomials can have up to three zeros where they intersect the x-axis. Polynomials are used in engineering, economics, physics, and industry to model and describe real-world phenomena like roller coaster curves, price variations over time, energy and voltage differences.
La endodoncia es un tratamiento odontológico que consiste en la extirpación de la pulpa dental y el posterior relleno y sellado de la cavidad pulpar con un material inerte. Se aplica a piezas dentales con caries profundas o fracturas que afectan la pulpa, con el fin de evitar el doloroso proceso de inflamación del nervio y la posterior pérdida del diente. La endodoncia se realiza en varias fases: acceso a la cámara pulpar, instrumentación y limpieza de los conductos radiculares,
Este documento presenta el caso de una mujer de 32 años con una lesión nodular no dolorosa de 2 cm en la glándula tiroides. Las pruebas de imagenología mostraron un nódulo de 2 cm en el lóbulo derecho. Luego de la extirpación quirúrgica, el análisis microscópico determinó que se trataba de un adenoma folicular con células que presentaban aspecto oncocítico o de Hürthle, que es considerado generalmente como una neoplasia benigna. Se recomienda mantener vigil
O documento apresenta as seguintes informações essenciais:
1) Aprova as NBC TP 01 e NBC PP 01, que estabelecem regras e procedimentos para a realização de perícias contábeis no âmbito judicial, extrajudicial e arbitral.
2) Define conceitos como perícia contábil, laudo pericial, parecer pericial e as atribuições dos peritos-contadores e peritos-contadores assistentes.
3) Estabelece diretrizes sobre a execução de perícias, tais como planejamento, termo de dilig
La inflamación puede ser aguda o crónica. La inflamación aguda implica fenómenos alterativos y exudativos vasculares con la llegada de neutrófilos, mientras que la inflamación crónica implica fenómenos exudativos celulares con macrófagos y linfocitos que pueden causar destrucción tisular. Ambos tipos de inflamación intentan reparar el tejido dañado a través de mecanismos como la angiogénesis y la fibrosis.
La rodilla presenta varias pruebas para evaluar su funcionamiento. La inspección evalúa deformaciones y tamaño del liquido sinovial. La movilidad se mide en grados de extensión, flexión, rotación interna y externa. La palpación incluye signos como el choque rotuliano y cepillo rotuliano. Pruebas como Steinmann, cajón anterior/posterior, y pívot evalúan ligamentos. Flexión con rotación interna/externa analiza meniscos usando pruebas de McMurray, Appley y Lachman.
El documento describe brevemente la respuesta inmune innata y adaptativa a la infección. Explica que la inmunidad innata es la primera línea de defensa e incluye barreras físicas, moléculas como el complemento y células como los macrófagos y células dendríticas. Luego, la inmunidad adaptativa es más lenta pero específica para el antígeno, involucra linfocitos T y B, y genera memoria inmunológica. Finalmente, resume los pasos de la activación de los linfocitos T
Fire Alarm, Smoke Detector and Automatic Sprinkle SystemKhairul Azhar
This document describes a fire alarm and smoke detector system designed using digital logic. The system uses inputs from an emergency switch, smoke detector, and main switch. It outputs a fire alarm and activates an automatic sprinkler system. The logic design includes OR gates, AND gates, a JK flip flop timer set to 3 seconds, a 1Hz clock, 7 segment displays, and inverters. When the smoke detector or emergency switch is activated, the alarm will sound for 3 seconds before automatically shutting off the sprinkler and alarm. The group's responsibilities for the project are also outlined.
El documento describe los diferentes tipos de instrumental utilizado en operatoria dental. Se clasifica en instrumental activo (cortante de mano y rotatorio), complementario (para examen y preparar el campo operatorio), y para restauraciones. El instrumental activo se usa para cortar tejidos, el complementario para examinar y aislar al paciente, y el de restauraciones para trabajar con materiales como amalgama y resina.
This document provides an introduction to programmatic mobile media buying. It discusses how programmatic advertising has become mainstream, replacing traditional ad sales methods. Programmatic allows automated purchase of ad placements using data to target individuals. It is more efficient than traditional methods as it eliminates human error and delay, allowing optimization of ad inventory and buying in real time. The document is an overview guide to programmatic mobile advertising, covering the basics, different programmatic buying types, using data, and tips for advertisers.
Major Project Report on overheat and smoke detection with GSM module in final year of Undergraduate course in Electronics and Communication Engineering
The document describes DTect-IT, a machine monitoring system from Caron Engineering that uses custom USB sensors to monitor various aspects of CNC machines. It can monitor things like clamping force, spindle power, temperature, bearing health, and more. The system provides limit analysis, fault detection, frequency analysis, and stores all monitored data. It communicates with the CNC machine to provide feedback on conditions and make adjustments if needed. DTect-IT comes with a variety of sensor options and provides intuitive data analysis to help detect issues and enable preventative maintenance for CNC machines and tools.
This document provides instructions for installing and calibrating the RT-LCM high reach truck load capacity monitor. The monitor measures hydraulic pressure to calculate lifted load percentage. It must be installed on the lifting hydraulic circuit and calibrated using empty and known weight loads. Detailed steps are provided for connecting components, performing electrical and pressure transducer installations, and executing the automatic two-point calibration procedure. Safety practices and a general operator usage guide are also included.
The Handheld Satcom Test Source by WORK Microwave is a portable signal generator capable of producing precise reference signals between 50-180 MHz and 950-2150 MHz. It can be used to test high-frequency converters by generating two signals to measure intermodulation distortion. It is also well-suited for calibrating other test equipment like spectrum analyzers due to its adjustable power levels and ability to store settings internally. Testing confirmed it provides accurate readings when used to verify the measurements of a Deviser S7000 TV analyzer.
This document summarizes the WORK Microwave Handheld Satcom Test Source signal generator. It can generate signals from 50-180 MHz and 950-2150 MHz with precision to serve as a reference for measuring complex analog systems. It has two independent synthesizers, allowing it to generate two signals simultaneously for measuring intermodulation of high-frequency converters. Its adjustable output power level from -45 to -5 dBm in 0.5 dB steps enables measuring the 1 dB compression point and conversion gain of converters. The portable generator can operate on its internal battery or via USB, making it a versatile testing device.
This document provides instructions for using Imada digital torque wrenches and testers. It details specifications, operation modes, programming, data output, memory functions, and other features. The warranty covers defects for two years but has restrictions. The manual outlines safety information and proper use of the devices.
The document summarizes a test signal generator called the Handheld Satcom Test Source produced by WORK Microwave. It can generate signals from 50-180 MHz and 950-2150 MHz with precision, making it suitable for calibrating test equipment and measuring parameters of high-frequency converters. The generator has two independent synthesizers allowing it to supply two signals simultaneously for measuring intermodulation. It also allows flexible setting of output levels for measurements like compression point and conversion gain. The generator includes rechargeable batteries, software control, and integrates smoothly with Windows operating systems.
The document summarizes a test signal generator produced by WORK Microwave called the Handheld Satcom Test Source. It can generate signals from 50-180 MHz and 950-2150 MHz with adjustable power levels and is used to test high-frequency converters and measure intermodulation signals and compression points. The generator has two independent synthesizers, rechargeable batteries, and connects to a computer via USB to control sweeps and measurements through easy-to-use software. It provides a robust and portable solution for precision high-frequency testing.
This document provides installation and calibration instructions for the CubeFreight 400 lift truck onboard weighing and dimensioning system. It describes how to install the pressure transducer, digital indicator, pallet height sensor and other components. The calibration process involves lifting empty and known weight loads to automatically calibrate the weighing function. The pallet height sensor is mounted on the mast and its distance to the ground is calibrated. Safety precautions are outlined and technical support contact information is provided.
The document provides instructions for calibrating and using the SP-1000 SkidWeigh Plus on-board vehicle weighing system. It describes how to enter calibration mode by logging in with a password, then calibrating the system by lifting empty forks and a known weight load above the ground. It explains the user mode, including starting a session by logging in an operator ID, taking weight readings by lifting loaded forks, and totaling weights under waybill IDs. Functions of the control keys for weighing, taring, totaling, printing, and ending a session are also summarized.
DCS (Distributed Control System) is a computerized control system used to control production lines in industries. It consists of field control stations with input/output modules and a CPU, an operator station for monitoring the process, and an engineering station for configuring the system. The DCS receives input signals from sensors, processes the data, and takes actions like adjusting valves based on setpoints to control physical quantities like pressure and temperature. It displays the process values, setpoints, and manipulated outputs on operator interfaces called faceplates to monitor the control process.
DCS (Distributed Control System) is a computerized control system used to control production lines in industries. It consists of field control stations with input/output modules and a CPU, an operator station for monitoring the process, and an engineering station for configuring the system. The DCS receives input signals from sensors, processes the data, and takes actions like adjusting valves based on setpoints to control physical quantities like pressure and temperature. It displays the process values, setpoints, and manipulated outputs on operator interfaces called faceplates to monitor the control process.
DCS (Distributed Control System) is a computerized control system used to control production lines in industries. It consists of field control stations with input/output modules and a CPU, an operator station for monitoring the process, and an engineering station for configuring the system. The DCS receives input signals from sensors, processes the data, and takes actions like adjusting valves based on setpoints to control physical quantities like pressure and temperature. It displays parameters on operator screens called faceplates to allow monitoring and manual control of the process.
This document provides a user manual for an ultrasonic level meter. It includes 3 sections:
1. An introduction that outlines the meter's features such as its precision, non-contact design, and ability to connect to displays and DCS systems.
2. Technical specifications including a measuring range of 0-15m, accuracy of 0.3%, analog and digital output options, and operating temperature range.
3. Installation instructions covering the external dimensions, wiring, definitions of installation parameters, principles, and precautions. It provides diagrams of how the meter works and defines terms like mounting height and blind area.
The document describes a handheld satellite communications test signal generator produced by WORK Microwave. It can generate signals from 50-180 MHz and 950-2150 MHz with precision and calibration certification. The generator allows for precise measurement of parameters for high-frequency converters like intermodulation and 1 dB compression point. It has two independent synthesizers, allowing it to output two signals simultaneously for testing. The generator was used to precisely calibrate a television signal analyzer, confirming its accuracy. It can also be used to test cable runs by sweeping signals and measuring attenuation characteristics.
The document summarizes a test signal generator produced by WORK Microwave called the Handheld Satcom Test Source. It can generate signals from 50-180 MHz and 950-2150 MHz with precision and is used as a reference for calibrating equipment and testing high-frequency converters. The generator has two independent synthesizers allowing it to output two signals simultaneously for measuring intermodulation. It also allows adjustable power levels for testing parameters like 1 dB compression point and conversion gain of converters. The generator has a rechargeable battery, rugged aluminum housing, and connects to a PC for control via USB without needing additional drivers.
This document provides information about a Z-Wave water meter sensor with firmware version 3.0. The sensor fits into water meters from Sensus and transmits meter readings via the Z-Wave network on a timed or delta change basis. It uses a lithium battery that provides an estimated 10 years of battery life. The sensor can be included and excluded from a Z-Wave network by placing a magnet on it for 3 seconds until the LED blinks red. It supports configuration of parameters like the reading reporting interval and wakeup interval to communicate with controllers.
The document provides installation and usage instructions for the SC3 SkidWeigh Classic lift truck onboard check weighing scale. It describes installing the pressure transducer and digital indicator, calibrating the system by lifting empty forks and forks with a known weight load, and operating the two weighing channels to display accumulated load weights. Safety precautions are outlined and technical support contact information is provided.
The Handheld Satcom Test Source by WORK Microwave is a portable test signal generator designed for precise high-frequency measurements. It can generate signals from 50-180 MHz and 950-2150 MHz with adjustable power levels. The generator has two independent synthesizers allowing it to output two signals simultaneously for measuring intermodulation in high-frequency converters. Its portability and integrated rechargeable battery make it a versatile tool for testing satellite transmission equipment.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
20 Comprehensive Checklist of Designing and Developing a WebsitePixlogix Infotech
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentations
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...Zilliz
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
Building RAG with self-deployed Milvus vector database and Snowpark Container...Zilliz
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
National Security Agency - NSA mobile device best practices
C- Smart Over Pressure System
1. Compass Instruments, LLC, Tomball,
Texas is now accepting orders for their
new patented safety device that not
only provides superior data, but also
provides almost instantaneous
shutdown when the smart sensor
determines an over pressure condition
is about to occur.
No matter if you are fracturing or
cementing a well, pumping liquid
nitrogen to blow out a pipeline,
pumping through a coil tubing unit, or
what ever the application; we all know
that accidents can happen. And the
damage to personnel and equipment
can be devastating.
This new device resides on each pump
between the control system and the
discharge pressure transmitter and
has wireless communication with the
data van..
Upon power up, it auto-calibrates the
pressure transmitter without changing
the signal level sent back to the control
system. As soon as the auto-calibrate
function is finished, the device will
output a clean, corrected, super
accurate 4 to 20 milliamp signal to
the control instrumentation.
The discharge pressure input to the
regular pump controller can be
calibrated by implementing a pressure
‘CAL’ command. This causes the
smart sensor to output 20 milliamps
A monitoring system inside the data
van allows operator input for setting
the over pressure shutdown value.
This information is then sent to each
pump unit via a wireless transceiver.
Each pump unit then responds by
sending back the actual discharge
pressure.
The data van monitoring system also
receives information from the well
head pressure transmitter. The well
head pressure and the over pressure
shutdown is displayed in larger
numbers in the upper portion of the
display. On the lower portion of the
display, the over pressure shutdown
value is plotted against the actual well
head pressure, with time and date.
The data received from each pumping
unit, the wellhead pressure, the over
pressure shutdown value, and the
time and date are all saved in memory
and may be exported to a USB
memory stick.
NEW SMART OVER PRESSURE SENSOR DETECTS
HAZARDOUS CONDITIONS BEFORE THEY OCCUR
COMPASS
INSTRUMENTS , LLC
A NEW PATENED SAFETY DEVICE THAT OFFERS
REAL PROTECTION FOR HIGH PRESSURE PUMPING
D E C E M B E R 2 1 , 2 0 1 5T O M B A L L , T E X A S
FEATURES
FILTERS THE PRESURE
SIGNAL FOR STABLE
DISPLAY, CHARTS
AND DATA LOGGING
AUTOCALIBRATES
THE PRESSURE
TRANSMITTER AT THE
BEGINNING OF EVERY
JOB.
DISPLAYS ACTUAL
PRESSURE AND OVER
PRESSURE SHUT-
DOWN VALUES
PROVIDES A SHUT-
DOWN OUTPUT
SIGNAL IN LESS THAN
1 MILLISE.OND WHEN
THE SMART SENSOR
DETERMINES THAT A
HAZARDOUS
CONDITION IS ABOUT
TO HAPPEN.
WARNS OF A
PRESSURE
TRANSMITTER WITH
AN OUTPUT OUTSIDE
THE NORMAL RANGE.
COMMUNICATES
WIRELESSLY WITH
THE DATA VAN SO
THERE ARE NO WIRES
OR CABLES,
SIMPLIFYING SET-UP.
WIRELESS UNIT IN
DATA VAN DISPLAYS
AND DATA LOGS
WELL HEAD PRESSURE
AND PRESSURE FROM
EACH PUMP.
2. P A G E 2
We believe
every life has
considerable
value. We
want to do
everything
we can to
protect those
we love and
our fellow
workers.
The Smart Sensor
At the heart of this unit is the Smart Sensor which synchronizes and
communicates with the discharge pressure transmitter, calibrating the
internal circuitry to the actual range of the pressure transmitter.
The input signal from the discharge pressure transmitter is also affected by
special proprietary circuitry to reduce or eliminate the pressure spikes
caused by the action of the fluid ends.
Working with clean data allows the pressure slope to be calculated to
determine if an over pressure condition is about to occur, if so, a shutdown
command is given immediately to both the engine and transmission.
This unit also contains a two line display which indicates discharge pressure
on one line and the over pressure shutdown value on the other. In the
event the pressure transmitter is out of range or not functioning, this
information will also be displayed.
Finally, a shutdown output connects to the engine and transmission to stop
the pump when a hazardous condition occurs. From the time the hazardous
condition occurs until the shutdown output is activated should be less than
10 milliseconds.
A shutdown command may also be implemented in the data van and
transmitted via the wireless system to every pump, while this can be
broadcast quickly to all the pumps at the same time, it must be understood
that the wireless transmission is not instantaneous.
“Warning” and “strobe” outputs are triggered when the pressure in the high
pressure line exceeds 20 and 30 PSI respectively. A strobe light is supplied
with the system and can connect to either of these outputs to let the
operators know that there is still pressure in the high pressure line.
H & H Technical Services has been contracted to install and certify all these
systems. They will first check to see what engines and transmissions are on
your units, verify how they are programmed, then define what signal is
required for shutdown and which connector and pin we should connect to.
Custom over-molded cables are then made and H & H Technical Services
will schedule a time to install and certify the system on each truck.
A N E W P A T E N E D S A F E T Y D E V I C E
3. The Data Van Display
P A G E 3T O M B A L L , T E X A S
Data is displayed on a
monitor with a display
area 23” wide and only
9.75” tall. Wireless linking
with all the pump units on
location is automatic and
requires no special
operator skills.
With the data van in place
and powered up, apply
power to each of the
pump units one at a time
and they will be displayed
on the screen in the order
in which they were
initialized.
As they initialize, any
errors detected on the pump
will be displayed. Non criti-
cal errors will disappear
when acknowledged.
Critical errors may require
maintenance, such as
replacing a bad cable or
changing out a pressure
transmitter that is out of
range.
Critical errors will clear
automatically when the
problems causing the errors
have been corrected.
Once the errors are clear,
the pump’s discharge
pressure is displayed on
the left side of the screen.
Up to 40 pump units may be
used with one display.
The display is driven by a
computer mounted on a
plate just behind the display.
A cable from the computer
connects to a joystick which
allows the operator to clear
non-critical errors, set the
over pressure shutdown
limit, and do other general
functions.
The computer also connects
to a wireless module which
communicates with all the
pump units.
the van. The function of this unit is to
filter the 4-20 milliamp signal from the
wellhead for display, charts, and/or
data logging.
This unit also has a serial output that
connects to the data van display.
Wellhead pressure and over pressure
shutdown are displayed in large
numbers across the top area of the
display. On the lower part of the
display these same two values are
plotted on the screen real time, with
time and date.
The Over Pressure Shutdown is the pres-
sure not to exceed. Since this can be dif-
ferent on every job, it must be program-
mable. It can be easily incremented or
decremented using the joy stick.
If the wellhead pressure gets close to the
over pressure shutdown value, the
displayed values will change color. If it
actually reaches the over pressure
shutdown value, the displayed values will
be bright red.
The wellhead pressure transmitter
connects to a smart sensor in the back of
Wellhead Pressure &
Over Pressure Shutdown
“Having clear
decisive data is
enough to settle
many disputes”
4. From the beginning, our motto has been,
“Innovation with Direction.” We feel this is
another product that is worthy of our motto.
It provides stable pressure data for display and data logging.
It checks and auto calibrates the discharge and well head pres-
sure transmitters.
It provides a considerably faster output for over pressure to set
the engine to idle and the transmission to neutral.
And the smart feature of being able to predict an over pressure
condition before it happens can:
Prevent injury and/or death of personnel.
Prevent the destruction of valuable equipment.
Prevent exceeding the rating of the high pressure iron.
Prevents exceeding the over pressure set point—so pre-
vents liability of damage to well.
321 S. PERSIMMON ST
TOMBALL, TX 77375
Phone: 832.698.2047
Fax: 281.476.6575
E-mail:
SALES@COMPASSINSTRUMENTS.COM
OTHER FEATURES
A warning output provides a signal to a remote
indicator light and is active when there is more
than 20 PSI (this is programmable) in the high
pressure line.
A strobe output provides a signal to a remote
strobe light (supplied) and is active when there
is more than 30 PSI (again programmable) in
the high pressure line.
COMPASS INSTRUMENTS, LLC
Compass Instruments, LLC “Innovation with Direction”
Compass Instruments has been providing industrial electronic instrumentation to oil/gas well service companies since
2007. In 2011 we became Compass Instruments, LLC. And in 2013 we added a complete sheet metal fabrication
shop. In 2014 we purchased our own facility in Tomball, Texas and now have our electronics instrumentation group
and sheet metal fabrication group all under one roof.
Compass Instruments, LLC is large enough to supply your instrumentation needs, yet small enough to react to your
specific requirements. We are well staffed with a great group of knowledgeable and caring employees who have many
years of experience.
Other companies attempt to play the game of competition, building products as economically as possible to fight for
market share over price. We feel we have no competition on the standard products we sell because we better un-
derstand our market. Therefore we want our products to be designed smarter, be made with higher quality compo-
nents, operate over a wider temperature range, stand up to higher shock and vibration, and have functions that just
make sense.
It is true that we do not always compete with others on price, but then you get what you pay for. For example our
12VDC to 24VDC converter outputs 10 amps. We have a competitor who builds a unit with the same form, fit, and
function—they begin failing after two years, and by year four, they will for sure have to be replaced. We begin selling
our unit in 2008 and have since sold thousands, and to date have never had one returned from the field because it
failed. Cost? Ours is about twice the cost initially. But you will pay more to have a technician replace theirs than
what the difference is. And then we won’t consider the cost of a failure during a critical point in a job.
WHAT IS PROVIDED WITH THIS SYSTEM?
The C-SMART SAFETY SYSTEM is supplied as a
complete system with everything needed and even
includes installation and certification.
On each pumping unit, it connects between your 4-
20 mA pressure transmitter and your instrumentation.
Custom cables connect to the engine and transmis-
sion for quick shut-down in the event of a hazardous
condition.
The Data Van unit connects between the 4-20 mA
pressure transmitter at the well head and the data
van pressure input.