Electric Vs. Gas Chainsaws
•
0 likes•86 views
This document discusses the differences between electric and gas chainsaws. Electric chainsaws are best for first-time users as they pack less power but are easier to use, while gas chainsaws are recommended for heavy-duty work like cutting firewood or removing fallen trees due to their stronger motors. The best type depends on the task, location, and available power source. Both require safety precautions when operating the powerful machines.
Report
Share
Report
Share
Download to read offline
Recommended
Best gas chainsaw
If you are thinking about getting a chainsaw, it's important to know which would be better for you, an electric or gas powered chainsaw. Each has advantages and disadvantages and you will have to weigh them for your particular situation.
Misawa Air Base AC Mythbusters
An efficient central air conditioning (AC) system or multiple window units would consume significantly more power than using fans to cool a 1500 square foot home. A central AC system would use around 2000 kWh per month, over 3 times as much as 8 fans, which would use around 600 kWh. Solar panels also cannot meet the power needs for AC, as a typical solar system at Misawa could only generate around 400 kWh per month, just one fifth of what is required to run an AC system. Additionally, installing window units for all housing at Misawa is not possible due to infrastructure limitations, as the base substations could only support power for around 425 homes with AC units before exceeding capacity.
AC Coupled Battery 6kWh of Useable Storage
6kWh of useable energy with a MAX AC Output of 3kw expandable to 12kWh Useable with a MAX AC Output of 4.5kW.
INDUSTRIAL ELECTRONICS,POWER ELECTRONICS,ELEARNING
Power electronics controls electrical energy using electronic circuits and switches semiconductor devices between cutoff, saturation, and active regions. It differs from linear electronics which uses semiconductor devices as amplifiers in the active region. Power electronics has lower switching losses, operates switches rather than amplifiers, and is used in applications that require control of high power levels like motor drives, power supplies, and renewable energy systems. Common examples of power electronics applications include light dimmers, air conditioners, vacuum cleaners, induction cooking, UPS systems, escalators, blowers, elevators, pumps, compressors, and cranes.
Save the ice caps!
The document proposes using wind turbines to harvest energy from katabatic winds near the Arctic and Antarctic ice caps. By reducing the energy in these downward winds, more energy would transfer from the melting ice into the air according to thermodynamics. This harvested energy would power a giant laser beam, reflected by satellites to a convection tower, transferring heat energy constantly from the poles to temperate zones and providing power for companies.
Functions of fuse and earth wire
The fuse protects electric circuits from excessive current by containing a wire that melts when overheated. There are two main types: replaceable wire fuses and cartridge fuses. The fuse rating indicates the maximum current it can withstand without melting. Fuses should be rated slightly higher than the appliance's normal current to prevent tripping during regular use. Earth wires connect appliances to ground and provide a path for current in case of a loose live wire, preventing electric shocks.
Advanced modeling of a 2 k w series–series resonating inductive charger for r...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3eprojects.com
E003B energy & torque
This document discusses key concepts related to energy, work, torque, and power in electrical circuits. It defines work as force applied over a distance, power as the rate of doing work, and energy as the potential to do work. Torque is described as the turning effort of a motor. The document also covers efficiency of machines, calculating output power using speed and rotational force, and how losses indicate efficiency. Power input and output are related to voltage, current, and efficiency calculations.
Recommended
Best gas chainsaw
If you are thinking about getting a chainsaw, it's important to know which would be better for you, an electric or gas powered chainsaw. Each has advantages and disadvantages and you will have to weigh them for your particular situation.
Misawa Air Base AC Mythbusters
An efficient central air conditioning (AC) system or multiple window units would consume significantly more power than using fans to cool a 1500 square foot home. A central AC system would use around 2000 kWh per month, over 3 times as much as 8 fans, which would use around 600 kWh. Solar panels also cannot meet the power needs for AC, as a typical solar system at Misawa could only generate around 400 kWh per month, just one fifth of what is required to run an AC system. Additionally, installing window units for all housing at Misawa is not possible due to infrastructure limitations, as the base substations could only support power for around 425 homes with AC units before exceeding capacity.
AC Coupled Battery 6kWh of Useable Storage
6kWh of useable energy with a MAX AC Output of 3kw expandable to 12kWh Useable with a MAX AC Output of 4.5kW.
INDUSTRIAL ELECTRONICS,POWER ELECTRONICS,ELEARNING
Power electronics controls electrical energy using electronic circuits and switches semiconductor devices between cutoff, saturation, and active regions. It differs from linear electronics which uses semiconductor devices as amplifiers in the active region. Power electronics has lower switching losses, operates switches rather than amplifiers, and is used in applications that require control of high power levels like motor drives, power supplies, and renewable energy systems. Common examples of power electronics applications include light dimmers, air conditioners, vacuum cleaners, induction cooking, UPS systems, escalators, blowers, elevators, pumps, compressors, and cranes.
Save the ice caps!
The document proposes using wind turbines to harvest energy from katabatic winds near the Arctic and Antarctic ice caps. By reducing the energy in these downward winds, more energy would transfer from the melting ice into the air according to thermodynamics. This harvested energy would power a giant laser beam, reflected by satellites to a convection tower, transferring heat energy constantly from the poles to temperate zones and providing power for companies.
Functions of fuse and earth wire
The fuse protects electric circuits from excessive current by containing a wire that melts when overheated. There are two main types: replaceable wire fuses and cartridge fuses. The fuse rating indicates the maximum current it can withstand without melting. Fuses should be rated slightly higher than the appliance's normal current to prevent tripping during regular use. Earth wires connect appliances to ground and provide a path for current in case of a loose live wire, preventing electric shocks.
Advanced modeling of a 2 k w series–series resonating inductive charger for r...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3eprojects.com
E003B energy & torque
This document discusses key concepts related to energy, work, torque, and power in electrical circuits. It defines work as force applied over a distance, power as the rate of doing work, and energy as the potential to do work. Torque is described as the turning effort of a motor. The document also covers efficiency of machines, calculating output power using speed and rotational force, and how losses indicate efficiency. Power input and output are related to voltage, current, and efficiency calculations.
Various electronics and electrical equipments at home{created by nitesh}
This document discusses and compares electrical and electronic devices. It provides examples of common electrical devices like fans, heaters and toasters that use electricity to produce effects like motion, heat or light. Electronic devices are defined as those containing electronic components like smartphones, headphones and cameras. Specific electrical appliances found in homes are discussed, such as ceiling fans which use a capacitor start motor, and toasters which heat bread using thin glowing filaments. Examples of electronic devices commonly found in homes include laptops, home theater systems, DVD players and smartphones.
Data sheet Spring 2016
The document discusses a research project to create a magnetic field that protects astronauts from radiation in space. The researchers plan to build a prototype using a superconductor such as MgB2 wire cooled with liquid nitrogen to generate the magnetic field. By spring 2016, they aim to have finalized their research, designed a prototype, and potentially built and tested an initial tokamak device to evaluate the magnetic field effectiveness. Key components needed include a superconductor wire, liquid nitrogen, and sensors to measure the magnetic field strength generated.
Definitions UNIT 6
This document defines key terms related to electricity and magnetism including appliances, conductors, fuse boxes, insulators, magnets, plugs, sockets, and switches. Appliances are devices used in the kitchen that require electricity to operate. Conductors allow electricity to flow through them while insulators do not. Fuse boxes interrupt electric circuits if the current is too high and magnets attract magnetic materials. Plugs temporarily connect devices to a power source and sockets are wall ports where devices connect to electricity. Switches are used to turn lights and other devices on and off.
Forest Sustainable - Solar + Windmill Energy Solution
PRODUCE OWN ENERGY - ACHEIVE 100% POWER BACKUP
High Growth Indian Solar Market:-
With roof-top solar energy, we can reduce the electricity bill up to 100%.
Every second, the sun produces enough energy to power the earth several times over, and our renewable energy solution is helping home and business owners to produce own power to provide remarkable support to nature and society.
Millman's theorem
This document discusses Millman's theorem for AC networks. It states that multiple voltage sources in parallel with internal impedances can be replaced by an equivalent single voltage source in series with an equivalent impedance. The equivalent voltage and impedance are calculated using the individual voltage and admittance values. An example problem demonstrates how to use the theorem to find the current through a load for a given parallel AC circuit. Reference books on circuit analysis are also listed.
Pv solar layout
The document provides a process flow diagram for a proposed Gwanda PV solar power station in Zimbabwe. It describes that the power station will consist of up to 100 PV arrays made up of thousands of solar panels that will convert sunlight into direct current. Inverters will convert the direct current into alternating current. Step-up transformers will increase the voltage to 33kV to feed into the local substation. The local substation then increases the voltage further to 132kV for transmission to the national grid via an existing substation in Gwanda.
protective equipments for electrical
This document discusses different types of electrical safety devices used to protect circuits. Fuses operate to provide overcurrent protection by interrupting current flow. Circuit breakers are automatically operated switches that protect circuits from damage caused by overcurrent or short circuits by interrupting current after a fault is detected. Molded case circuit breakers (MCCBs) can withstand higher amperage than miniature circuit breakers and are used for more energy-intensive systems, with adjustable trip settings. Residual current circuit breakers (RCCBs) are particularly useful for protecting against sudden earth faults, tripping the circuit in a fraction of a second to prevent electrical shocks.
Unit c electrical principals & technologies notes(parallel & series c...
This document compares and contrasts series and parallel circuits. It notes that in a series circuit there is only one pathway for current and if it is interrupted the whole circuit fails, while in a parallel circuit there are separate current paths and an interruption in one does not affect the others. It provides examples of uses for each, noting that things like Christmas lights and household wiring use parallel circuits so that if one component fails it does not disable the entire system.
The Industry
The document discusses several ways that an office space can reduce electricity usage and improve efficiency. It notes that natural daylight is not fully utilized, emergency lighting stays on all day, and lights are often left on in unused areas. It also points out issues like items stacked near electrical panels and transformers, and leaks and spills observed around backup generators. Maintaining clear access and replacing batteries and parts regularly could help address these problems and reduce wasteful energy use.
Australian energy smart-presentation-1
The document discusses the EnergySmart device, which plugs into power points in homes. It claims that the device reduces the amount of real power consumed by appliances by supplying reactive power, thereby lowering electricity bills. It provides demonstration videos that allegedly show reductions in kW usage and costs of 8-13% when the EnergySmart is used with various appliances like microwaves, air conditioners, and pool pumps. The document suggests the EnergySmart works by supplying the reactive current component to appliances instead of it coming from the electricity grid, which reduces distribution losses and lowers bills.
Portable Electic Heaters - Separating Fact from Fiction
Portable electric heaters require adequate wiring and should not be used with extension cords. They can use a significant portion of a circuit's capacity and should not replace a properly designed heating system. While some claim savings or special heating abilities, all portable electric heaters heat through resistance and have similar efficiency, with potential to increase energy costs if used to heat an entire home instead of supplementing another system. Air source heat pumps are a more economical electric heating option.
Case study of various types of electronic and electrical equipments at home
This case study examines various electrical and electronic equipment found in homes. It defines electrical equipment as devices that use or generate electricity to transform it into other forms of energy like heat or light. Examples given are electric irons, refrigerators, and toasters. Electronic equipment are defined as components that control electric currents for information processing and system control, using small integrated circuits. The key difference between the two is that electrical equipment works with higher voltages and currents using AC power, while electronic equipment works with lower voltages and currents using DC power. The document then explains how an electric iron works by passing a current through a wire to heat up its sole plate for ironing clothes.
Safety Talk: Electricity
Preparation for hazards and respect for this powerful energy source are a must. Even seasoned electricians need reminders on the basic rules of electrical safety. Here are a few to keep in mind.
How to select off grid inverter
Criteria for off grid inverter selection :Model and rate power, Inverter Efficiency, Protection Devices, . Pure sine wave , Surge capacity. Charging Method, Programmable supply priority, Certificates:, Multiple communication for USB, RS-232, Modbus and SNMP. Parallel operation Integrated with surge arrestors type II
Electrical devices
This document defines and provides examples of various electrical devices. It explains that an electrical device either produces or is powered by electricity, and then lists and describes antennae, batteries, capacitors, electric circuits, control boards, fuses, male plugs, resistors, and solar arrays as specific types of electrical devices. The document concludes by thanking the reader.
Solar power course Session 1
This document outlines the topics covered in a course on solar power systems. The course is suitable for engineering students and professionals interested in starting a career in photovoltaic solar power. The topics covered include introductions to electricity, solar electric systems, solar batteries, inverters, off-grid system design, wiring, charge controllers, racking systems, grid-tie systems, pumping systems, and the economical aspects of solar power. Specific lessons will cover series and parallel connections, different types of solar power systems, components of solar photovoltaic panels like cells and how they work, and factors to consider when installing solar panels like positioning, tilt angle, and avoiding shadows.
Electrical Energy
The document discusses electrical energy and how it can be converted to other forms of energy. It provides the formula for electrical energy (E=ItV) and describes an experiment to use that formula to calculate the energy needed to heat a metal using a heater. The experiment measures temperature, current, voltage, and energy over time as the metal is heated. A graph of temperature vs energy is created and the joules of energy needed to raise the temperature by one degree is calculated and compared to an expected value of 400 joules per degree.
Vocabulary Electricity and Magsnetisens
This document defines key vocabulary terms related to electricity and magnetism, including appliance, conductor, fuse box, insulator, magnet, plug, socket, and switch. An appliance is something used in the kitchen that requires electricity to operate. A conductor allows electricity to flow through it, while an insulator does not. A fuse box interrupts electric circuits with too high of a current. A magnet attracts magnetic materials. A plug temporarily connects devices to electricity, and a socket is where devices connect to a wall. A switch is used to turn lights on and off.
form 3 chapter 7
Electrostatics is the study of static electrical charges such as positive and negative charges. Charges exert forces on one another - likes repel and unlikes attract. An electric current is the flow of electrical charges through a circuit. Current and voltage can be measured with ammeters and voltmeters connected in series or parallel. Ohm's law states that the current through a conductor is directly proportional to the voltage across it. A magnetic field surrounds a magnet and can be visualized using iron filings or a compass. The flow of electric current produces a magnetic field around a wire that can be determined using the right-hand grip rule.
Difference between single phase wiring and three phase (latest)
Single phase wiring uses two wires to deliver power at voltages up to 240V and is suitable for small appliances. Three phase wiring uses three conductors and a neutral wire to deliver continuous power at 415V, making it suitable for larger homes and allowing multiple appliances to run in parallel more efficiently. While single phase wiring has lower installation costs, three phase wiring provides more stable power delivery and is recommended for homes with higher power needs or air conditioning units over 1.5 horsepower. Upgrading from single to three phase requires applying to the electricity provider and can take several weeks and cost between RM2,000-10,000 depending on the home size.
Customer loyalty in Indian Luxury Retail is a myth
Is the Incredible Indian Luxury Customer loyal to a Luxury Brand or does he seek others as well ?? As they experiment by hopping from one brand to another, the customer is enjoying his trip on luxury !
Gold Life Business Presentation
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
More Related Content
What's hot
Various electronics and electrical equipments at home{created by nitesh}
This document discusses and compares electrical and electronic devices. It provides examples of common electrical devices like fans, heaters and toasters that use electricity to produce effects like motion, heat or light. Electronic devices are defined as those containing electronic components like smartphones, headphones and cameras. Specific electrical appliances found in homes are discussed, such as ceiling fans which use a capacitor start motor, and toasters which heat bread using thin glowing filaments. Examples of electronic devices commonly found in homes include laptops, home theater systems, DVD players and smartphones.
Data sheet Spring 2016
The document discusses a research project to create a magnetic field that protects astronauts from radiation in space. The researchers plan to build a prototype using a superconductor such as MgB2 wire cooled with liquid nitrogen to generate the magnetic field. By spring 2016, they aim to have finalized their research, designed a prototype, and potentially built and tested an initial tokamak device to evaluate the magnetic field effectiveness. Key components needed include a superconductor wire, liquid nitrogen, and sensors to measure the magnetic field strength generated.
Definitions UNIT 6
This document defines key terms related to electricity and magnetism including appliances, conductors, fuse boxes, insulators, magnets, plugs, sockets, and switches. Appliances are devices used in the kitchen that require electricity to operate. Conductors allow electricity to flow through them while insulators do not. Fuse boxes interrupt electric circuits if the current is too high and magnets attract magnetic materials. Plugs temporarily connect devices to a power source and sockets are wall ports where devices connect to electricity. Switches are used to turn lights and other devices on and off.
Forest Sustainable - Solar + Windmill Energy Solution
PRODUCE OWN ENERGY - ACHEIVE 100% POWER BACKUP
High Growth Indian Solar Market:-
With roof-top solar energy, we can reduce the electricity bill up to 100%.
Every second, the sun produces enough energy to power the earth several times over, and our renewable energy solution is helping home and business owners to produce own power to provide remarkable support to nature and society.
Millman's theorem
This document discusses Millman's theorem for AC networks. It states that multiple voltage sources in parallel with internal impedances can be replaced by an equivalent single voltage source in series with an equivalent impedance. The equivalent voltage and impedance are calculated using the individual voltage and admittance values. An example problem demonstrates how to use the theorem to find the current through a load for a given parallel AC circuit. Reference books on circuit analysis are also listed.
Pv solar layout
The document provides a process flow diagram for a proposed Gwanda PV solar power station in Zimbabwe. It describes that the power station will consist of up to 100 PV arrays made up of thousands of solar panels that will convert sunlight into direct current. Inverters will convert the direct current into alternating current. Step-up transformers will increase the voltage to 33kV to feed into the local substation. The local substation then increases the voltage further to 132kV for transmission to the national grid via an existing substation in Gwanda.
protective equipments for electrical
This document discusses different types of electrical safety devices used to protect circuits. Fuses operate to provide overcurrent protection by interrupting current flow. Circuit breakers are automatically operated switches that protect circuits from damage caused by overcurrent or short circuits by interrupting current after a fault is detected. Molded case circuit breakers (MCCBs) can withstand higher amperage than miniature circuit breakers and are used for more energy-intensive systems, with adjustable trip settings. Residual current circuit breakers (RCCBs) are particularly useful for protecting against sudden earth faults, tripping the circuit in a fraction of a second to prevent electrical shocks.
Unit c electrical principals & technologies notes(parallel & series c...
This document compares and contrasts series and parallel circuits. It notes that in a series circuit there is only one pathway for current and if it is interrupted the whole circuit fails, while in a parallel circuit there are separate current paths and an interruption in one does not affect the others. It provides examples of uses for each, noting that things like Christmas lights and household wiring use parallel circuits so that if one component fails it does not disable the entire system.
The Industry
The document discusses several ways that an office space can reduce electricity usage and improve efficiency. It notes that natural daylight is not fully utilized, emergency lighting stays on all day, and lights are often left on in unused areas. It also points out issues like items stacked near electrical panels and transformers, and leaks and spills observed around backup generators. Maintaining clear access and replacing batteries and parts regularly could help address these problems and reduce wasteful energy use.
Australian energy smart-presentation-1
The document discusses the EnergySmart device, which plugs into power points in homes. It claims that the device reduces the amount of real power consumed by appliances by supplying reactive power, thereby lowering electricity bills. It provides demonstration videos that allegedly show reductions in kW usage and costs of 8-13% when the EnergySmart is used with various appliances like microwaves, air conditioners, and pool pumps. The document suggests the EnergySmart works by supplying the reactive current component to appliances instead of it coming from the electricity grid, which reduces distribution losses and lowers bills.
Portable Electic Heaters - Separating Fact from Fiction
Portable electric heaters require adequate wiring and should not be used with extension cords. They can use a significant portion of a circuit's capacity and should not replace a properly designed heating system. While some claim savings or special heating abilities, all portable electric heaters heat through resistance and have similar efficiency, with potential to increase energy costs if used to heat an entire home instead of supplementing another system. Air source heat pumps are a more economical electric heating option.
Case study of various types of electronic and electrical equipments at home
This case study examines various electrical and electronic equipment found in homes. It defines electrical equipment as devices that use or generate electricity to transform it into other forms of energy like heat or light. Examples given are electric irons, refrigerators, and toasters. Electronic equipment are defined as components that control electric currents for information processing and system control, using small integrated circuits. The key difference between the two is that electrical equipment works with higher voltages and currents using AC power, while electronic equipment works with lower voltages and currents using DC power. The document then explains how an electric iron works by passing a current through a wire to heat up its sole plate for ironing clothes.
Safety Talk: Electricity
Preparation for hazards and respect for this powerful energy source are a must. Even seasoned electricians need reminders on the basic rules of electrical safety. Here are a few to keep in mind.
How to select off grid inverter
Criteria for off grid inverter selection :Model and rate power, Inverter Efficiency, Protection Devices, . Pure sine wave , Surge capacity. Charging Method, Programmable supply priority, Certificates:, Multiple communication for USB, RS-232, Modbus and SNMP. Parallel operation Integrated with surge arrestors type II
Electrical devices
This document defines and provides examples of various electrical devices. It explains that an electrical device either produces or is powered by electricity, and then lists and describes antennae, batteries, capacitors, electric circuits, control boards, fuses, male plugs, resistors, and solar arrays as specific types of electrical devices. The document concludes by thanking the reader.
Solar power course Session 1
This document outlines the topics covered in a course on solar power systems. The course is suitable for engineering students and professionals interested in starting a career in photovoltaic solar power. The topics covered include introductions to electricity, solar electric systems, solar batteries, inverters, off-grid system design, wiring, charge controllers, racking systems, grid-tie systems, pumping systems, and the economical aspects of solar power. Specific lessons will cover series and parallel connections, different types of solar power systems, components of solar photovoltaic panels like cells and how they work, and factors to consider when installing solar panels like positioning, tilt angle, and avoiding shadows.
Electrical Energy
The document discusses electrical energy and how it can be converted to other forms of energy. It provides the formula for electrical energy (E=ItV) and describes an experiment to use that formula to calculate the energy needed to heat a metal using a heater. The experiment measures temperature, current, voltage, and energy over time as the metal is heated. A graph of temperature vs energy is created and the joules of energy needed to raise the temperature by one degree is calculated and compared to an expected value of 400 joules per degree.
Vocabulary Electricity and Magsnetisens
This document defines key vocabulary terms related to electricity and magnetism, including appliance, conductor, fuse box, insulator, magnet, plug, socket, and switch. An appliance is something used in the kitchen that requires electricity to operate. A conductor allows electricity to flow through it, while an insulator does not. A fuse box interrupts electric circuits with too high of a current. A magnet attracts magnetic materials. A plug temporarily connects devices to electricity, and a socket is where devices connect to a wall. A switch is used to turn lights on and off.
form 3 chapter 7
Electrostatics is the study of static electrical charges such as positive and negative charges. Charges exert forces on one another - likes repel and unlikes attract. An electric current is the flow of electrical charges through a circuit. Current and voltage can be measured with ammeters and voltmeters connected in series or parallel. Ohm's law states that the current through a conductor is directly proportional to the voltage across it. A magnetic field surrounds a magnet and can be visualized using iron filings or a compass. The flow of electric current produces a magnetic field around a wire that can be determined using the right-hand grip rule.
Difference between single phase wiring and three phase (latest)
Single phase wiring uses two wires to deliver power at voltages up to 240V and is suitable for small appliances. Three phase wiring uses three conductors and a neutral wire to deliver continuous power at 415V, making it suitable for larger homes and allowing multiple appliances to run in parallel more efficiently. While single phase wiring has lower installation costs, three phase wiring provides more stable power delivery and is recommended for homes with higher power needs or air conditioning units over 1.5 horsepower. Upgrading from single to three phase requires applying to the electricity provider and can take several weeks and cost between RM2,000-10,000 depending on the home size.
What's hot (20)
Various electronics and electrical equipments at home{created by nitesh}
Various electronics and electrical equipments at home{created by nitesh}
Forest Sustainable - Solar + Windmill Energy Solution
Forest Sustainable - Solar + Windmill Energy Solution
Unit c electrical principals & technologies notes(parallel & series c...
Unit c electrical principals & technologies notes(parallel & series c...
Portable Electic Heaters - Separating Fact from Fiction
Portable Electic Heaters - Separating Fact from Fiction
Case study of various types of electronic and electrical equipments at home
Case study of various types of electronic and electrical equipments at home
Difference between single phase wiring and three phase (latest)
Difference between single phase wiring and three phase (latest)
Viewers also liked
Customer loyalty in Indian Luxury Retail is a myth
Is the Incredible Indian Luxury Customer loyal to a Luxury Brand or does he seek others as well ?? As they experiment by hopping from one brand to another, the customer is enjoying his trip on luxury !
Gold Life Business Presentation
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Google app engine setup
The document provides instructions for creating an application on Google App Engine. It explains how to log in to appengine.google.com using a Google account, accept permissions, and click "Create Application." On the application creation page, the user enters an application ID and title, leaves the authentication option as default, accepts the terms of service, and clicks "Create Application" to finish. The application dashboard then displays options to view app data, deploy source code using appcfg, and invite other administrators.
Merger103
This document discusses different types of mergers: horizontal, vertical, and conglomerate. Horizontal mergers involve direct competitors, vertical mergers involve firms that have buyer-seller relationships, and conglomerate mergers involve unrelated firms or firms in separate markets. The document provides examples of each type of merger and discusses their potential effects on competition and welfare. Specifically, it notes that horizontal mergers directly impact concentration but may increase efficiency, while vertical and conglomerate mergers do not directly affect concentration but can still have anticompetitive effects.
Getting started
Dropbox is a free service that allows users to access and sync files across all their devices. Any file saved to the Dropbox folder on one device is automatically synced to all other linked devices. The Dropbox folder works just like any other folder but syncs file changes in real-time. Users can drag and drop files into their Dropbox folder to upload and access them from any device or the Dropbox website.
Adeshwar Containers
Adeshwar Containers started its manufacturing unit in Ahmedabad in the Year 1998 and today, with the help of our quality, trust and commitments with our customers accorss India, we have have been successfully growing while enhancing our capacity to cater to the various industrial applications and needs.
Indo france 2012 (6)
The article gives a insight on the evolution of Luxury in recent India and was published by The Diplomatist, official magazine of the French Embassy in India to educate their officials and diplomats on the status of French brands and why were they lagging behind with respect to Italian brands.
ui/ux for group chat mobile app
design presentation for new chat mobile app - hoozin
ui/ux netalie zohar- www.zoharstudio.com
Template
The Big Data Research Laboratory is directed by Dr. Shiyong Lu and focuses on big data, scientific workflows, and data mining. The laboratory is working on the VIEW project, a system for visualizing and exploring big data, which can be found at http://viewsytem.org.
Permenkes 3 2015 peredaran, penyimpanan, pemusnahan, dan pelaporan narkotika
Permenkes 3-2015 Peredaran, Penyimpanan, Pemusnahan, dan Pelaporan Narkotika
Viewers also liked (11)
Customer loyalty in Indian Luxury Retail is a myth
Customer loyalty in Indian Luxury Retail is a myth
Permenkes 3 2015 peredaran, penyimpanan, pemusnahan, dan pelaporan narkotika
Permenkes 3 2015 peredaran, penyimpanan, pemusnahan, dan pelaporan narkotika
Recently uploaded
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Recently uploaded (20)
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Electric Vs. Gas Chainsaws
- 1. (( THE RESOURCE FOR ELECTRIC CHAINSAWS ))
- 2. HERE WE DISCUSS ABOUT ELECTRIC VS. GAS CHAINSAWS
- 3. ELECTRIC CHAINSAWS AS THE NAME SUGGESTS, THIS TYPE OF CHAINSAW IS RUN BY ELECTRICITY. COMPARED TO GAS-RUN MODELS, THEY PACK ON A LESSER AMOUNT OF POWER, MAKING IT PERFECT FOR FIRST-TIME LOGGERS.
- 4. GAS CHAINSAWS RUN BY PETROLEUM, GAS CHAINSAWS ARE STURDY DEVICES THAT ARE RECOMMENDED FOR HEAVY- DUTY APPLICATIONS. WHEN IT COMES TO CHOPPING FIREWOOD, OR REMOVING FALLEN TREES AFTER A
- 5. THE VERDICT THE RIGHT KIND OF CHAINSAW DEPENDS ON SEVERAL FACTORS, SUCH AS THE TASK AT HAND, THE LOCATION OF THE PROJECT, THE AVAILABLE POWER SOURCE, TO NAME A FEW.
- 6. SAFETY REMINDERS WHATEVER CHAINSAW YOU PICK IN THE STORE, YOU NEED TO KEEP IN MIND THE FOLLOWING TECHNIQUES IN ORDER TO MAINTAIN YOUR SAFETY WHILE USING SUCH A POWERFUL DEVICE.