Call Girls Navi Mumbai Just Call 9907093804 Top Class Call Girl Service Avail...
Bdidc select idlersandtensioners2011
1.
2. To compete in today’s global marketplace, distributors
and OEMs need a supplier who can provide them with precision idlers and tensioners that
meet their quality, cost and delivery requirements. That’s why they rely on IDC-USA.
IDC Select idlers and tensioners are high quality products that meet or exceed Tier 1
manufacturers’ quality standards. These products include pulleys, bushings, sprockets,
idler shafts and miscellaneous tensioning products.
IDC-USA is committed to providing you with the personal service you deserve while
meeting your on-time delivery requirements with top quality, cost-effective products.
IDC-USA takes great pride in the quality of our products. Our precision idlers and
tensioners use only bearings from name brand manufacturers such as NTN, NSK, Nachi,
IKO and Timken.
IDC-USA also provides thermoplastic idler pulleys, which are precision molded glass-
reinforced nylon idlers. These idlers are available in a wide range of styles and sizes and
are found in the following industrial applications: lawn and garden equipment, motion
control, fitness equipment, conveyors and all other pulley applications.
IDC-USA also has the ability to customize our products to fit your specific needs. In most
cases, we are able to machine our products to the dimensions that you require.
For more information please visit us at www.IDC-USA.com or call 317-244-9200.
IDC-USA
933 Western Drive
Indianapolis, IN 46241
www.IDC-USA.com
Phone: 317-244-9200
Fax: 317-244-4600
www.IDC-USA.com • Phone: 317-244-9200
6. DRIVE TENSIONERS
The Single Adjusting Tensioner
can be mounted on any point of
a shaft or stud. This tensioner
permits controlled tensioning
at any point of the 360° arc.
The split at the base of the arm
allows for fast adjustment and
tight clamping on the shaft. The
SAT series tensioner should be
used when a frame member
is not present and a bolt-on
tensioner is not an option.
SINGLE ADJUSTING TENSIONER (SHAFT MOUNT)
Brewer Browning Approx.
Part C D E F G H I J K
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
SAT 3/8-16 AS SATH1 1/2 1/2 13/16 3 9/16 1/2 10/32 1 1/8 2 9/16 2 0.32
SAT 1/2-13 — SATH
SAT 5/8-11 — SATP
1 7/8 1 5/8 6 1/4 1 3/8 2 5 4 2.25
SAT 3/4-10 AM 3/4-10 SATQ
SAT 3/4-16 AM —
SAT 1-8 — SATQ-1
1 1/2 1 5/16 2 7/8 9 3/8 1 1/2 1/2 3 7 1/2 6 7.75
SAT 1-14 AL —
Idler shaft must be ordered separately. For shaft selection see page 20.
The Double Adjustable Base
Mount Drive Tensioner has a
360° rotating arm that permits
controlled tensioning at any
point of the arc. The adjusting
slot gives the operator easy
adjustment to keep proper
tension on the belt or chain drive
increasing the life of the drive.
This tensioner has serrated teeth
to prevent slippage.
DOUBLE ADJUSTING TENSIONER (BASE MOUNT)
Brewer Browning Approx.
Part C D E F G H I J K L M
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
DAT 3/8-16 SS DATN1 1/2 1 3/16 15/16 2 23/32 2 1 31/32 1 1/4 1 9/16 1 1/4 15/16 0.42
DAT 3/4-10 — DATSQ 1 1 7/8 1 1/2 4 5/8 3 1/2 3 1/16 2 1/16 3 2 3/8 1 3/4 2.66
DAT 3/4-16 SM — 1 1 7/8 1 1/2 4 5/8 3 1/2 3 1/16 2 1/16 3 2 3/8 1 3/4 2.66
DAT 1-8 — DATQ-1 1 1/2 2 15/16 2 3/8 6 15/16 5 1/4 4 9/16 3 6 1/2 5 5/8 2 5/8 10.25
DAT 1-14 SL — 1 1/2 2 15/16 2 3/8 6 15/16 5 1/4 4 9/16 3 6 1/2 5 5/8 2 5/8 10.25
Idler shaft must be ordered separately. For shaft selection see page 20.
www.IDC-USA.com • Phone: 317-244-9200
4
7. DRIVE TENSIONERS
The AFT Series Tensioner has
a flanged base that can be
mounted in a tight area where
space is limited. The rotating
arm gives the operator 360°
controlled tensioning and can
be easily adjusted to the proper
tension increasing the life of the
drive. The AFT Series Tensioners
have serrated teeth to prevent
slippage.
ADJUSTABLE FLANGE TENSIONER
Brewer Browning Approx.
Part C D E F G J K L
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
AFT 3/4-10 — ATQ 1 1 7/8 1 1/2 4 3 3 2 3/8 2.82
AFT 3/4-16 GSM — 1 1 7/8 1 1/2 4 3 3 2 3/8 2.82
AFT 1-8 — ATQ-1 1 1/2 2 15/16 2 3/8 7 1/2 6 6 1/2 5 5/8 9.37
AFT 1-14 GSL — 1 1/2 2 15/16 2 3/8 7 1/2 6 6 1/2 5 5/8 9.37
Idler shaft must be ordered separately. See page 27 for exceptions. For shaft selection see page 20.
E
J
The AAT Series Tensioner has E
TE N
SIO
NE
K
DR I V
an angled base that can be R
mounted on the top of a frame
E
L
AB
ST
JU C
member. The angled base
AD
G
N
provides parallel tensioning L-BOLT
with the drive. This tensioner
M
has serrated teeth to prevent
slippage. D F
I
H
ADJUSTABLE ANGLE TENSIONER
Brewer Approx.
Part C D E F G H I J K L M N
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
AAT 3/4-10 — 1 1 1/4 1 1/2 2 4 4 3 3 2 3/8 1/2 2 1/2 3.15
AAT 3/4-16 RSM 1 1 1/4 1 1/2 2 4 4 3 3 2 3/8 1/2 2 1/2 3.15
AAT 1-8 — 1 1/2 1 3/4 2 3/8 3 1/2 7 3/8 7 1/2 6 6 1/2 5 5/8 3/4 5 1/8 14.2
AAT 1-14 RSL 1 1/2 1 3/4 2 3/8 3 1/2 7 3/8 7 1/2 6 6 1/2 5 5/8 3/4 5 1/8 14.2
Idler shaft must be ordered separately. For shaft selection see page 20.
www.IDC-USA.com • Phone: 317-244-9200
5
8. DRIVE TENSIONERS
The FFT Series Tensioner has a
fixed flanged base that can be
mounted in a tight area where
space is very limited. This is
the ideal tensioner when the
center distance between shafts
is excessive and additional
tensioning is required. Typically
used with a combination of fixed
and adjustable tensioners.
FIXED FLANGE TENSIONER
Brewer Browning Approx.
Part C D E F G H
Weight
No. Interchange (in) (in) (in) (in) (in) (in)
(lbs)
FFT 3/8-16 GS FFTN1 1/2 1/2 1 1/8 1 3/4 2 3/8 1/4 0.18
FFT 3/4-10 GM 3/4-10 FFTQ 1 15/16 2 3 4 3/8 0.98
FFT 3/4-16 GM — 1 15/16 2 3 4 3/8 0.98
FFT 1-8 — FFTQ-1 1 1/2 1 7/16 3 1/2 6 7 1/2 5/8 4.55
FFT 1-14 GL -— 1 1/2 1 7/16 3 1/2 6 7 1/2 5/8 4.55
Idler shaft must be ordered separately. For shaft selection see page 20.
K F
The FAT Series Tensioner can
be mounted on top of any
flat surface and will provide C
horizontal tensioning. Can be
used with other FAT series G
tensioners, as well as, other D
tensioners to achieve proper J-BOLT
tensioning.
E I
H
FIXED ANGLE TENSIONER
Brewer Browning Approx.
Part C D E F G H I J K
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
FAT 3/8-16 RS FATN1 1/2 1 1/2 1 1/8 1 2 2 3/8 1 3/4 1/4 9/16 0.28
FAT 3/4-10 RM 3/4-10 FATQ 1 3 2 1 3/4 3 1/8 4 3 3/8 1 1/16 1.79
FAT 3/4-16 RM — 1 3 2 1 3/4 3 1/8 4 3 3/8 1 1/16 1.79
FAT 1-8 — FATQ-1 1 1/2 6 3 1/2 2 5/8 7 5/16 7 1/2 6 5/8 1 7/8 9.68
FAT 1-14 RL — 1 1/2 6 3 1/2 2 5/8 7 5/16 7 1/2 6 5/8 1 7/8 9.68
Idler shaft must be ordered separately. For shaft selection see page 20.
www.IDC-USA.com • Phone: 317-244-9200
6
9. DRIVE TENSIONERS
The RDT Tensioner has the
ability for continued tension
on reversible drives by
using a floating arm that will
automatically relocate
when the direction of the
drive is reversed.
REVERSIBLE DRIVE TENSIONER
Brewer Approx.
Part C D E F G H J K L M N
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
RDT 3/4-16 XM 1 2 1/4 1/8 2 1/2 3 4 15 3/4 3/8 1 3/4 7.36
Idler shaft must be ordered separately. For shaft selection see page 20.
The AST Series Tensioner uses
screw adjustment for positive
precise tensioning. Can be easily
mounted to any flat surface and
a favorite for operators that need
to make very fine adjustments.
ADJUSTABLE SCREW TENSIONER
Brewer Approx.
Part C D E F G H I J K L M N
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
AST 3/8-16 HS 1/2 1 1/2 1 1/16 5 1/2 4 3/4 3/8 1/4 1 13/16 3/4 1/4 2 1 3/8 0.87
AST 3/4-16 HM 1 2 1/2 1 1/2 9 3/8 8 3/8 3/4 1/2 2 3/8 1 3/8 4 2 3/16 4.29
AST 1-14 HL 1 1/2 3 5/8 2 3/8 16 14 1/2 1 1/4 3/4 4 3/8 1 3/4 5/8 8 3 1/4 15.91
Idler shaft must be ordered separately. For shaft selection see page 20.
www.IDC-USA.com • Phone: 317-244-9200
7
10. DRIVE TENSIONERS
The ST Series Tensioner provides
vertical tensioning by the use of
a sliding shaft through a mounted
base. The split in the base allows
for fast adjustment and tight
clamping on the shaft. The
tensioner head rotates 360°
and is a great option for long
shaft centers.
SLIDING TENSIONER
Brewer Approx.
Part C D E F G H I J K L M N
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
ST 3/8-16 LS 1/2 1 3/16 1 1/4 2 1/8 1 3/4 7/8 2 7/8 9/16 1/4 2 7/8 9/16 0.83
ST 3/4-16 LM 1 2 1/16 2 1/4 4 3 1 11/16 4 1 3/4 1 3/8 5 11/16 1 4.29
ST 1-14 LL 1 1/2 3 1/16 3 5/16 7 5 3/8 2 1/2 8 2 5/8 1 1/2 5/8 10 1/2 1 1/2 15.93
Idler shaft must be ordered separately. For shaft selection see page 20.
The SLT Tensioner Series
uses a compression spring for
automatic tensioning, the spring
will compress 1 inch for every 28
pounds of force with a maximum
travel of 3 inches. This tensioner
will provide constant tension
that will protect the drive from
damage caused by shock and
pulsation. The head rotates 360°
and the base has additional
vertical adjusting slots.
SPRING LOADED TENSIONER
Brewer Approx.
Part C D E F G H I J K L M N O
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
SLT MSL 1 1/2 3 3/16 1 7/8 6 4 3/8 7 3 2 5/8 1 5/8 5/8 10 1 5/8 13/16 18.5
Idler shaft must be ordered separately. For shaft selection see page 20.
www.IDC-USA.com • Phone: 317-244-9200
8
11. DRIVE TENSIONERS
The VMT Tensioner has
a 3 1/2" travel through
the use of the vertical
slot. The head is drilled
and tapped to accept
the SO5-F and SO6-F
shafts.
VERTICAL MOUNT TENSIONER
Part Brewer Approx.
A B C D E F G H J K L M
Weight
No. Interchange (in) (in) (UNF) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
VMT MVL 12 1/2 3 1"-14 2 1/2 3 1/2 1/2 2 1/2 7/8 1 3/4 2 3/8 2 3/8 7/8 12
Idler shaft must be ordered separately. For shaft selection see page 20.
The HMT Tensioner has a 3 1/2"
travel and is mounted 90° to the
length of the part. Both ends
are tapped so the shaft can be
threaded on either side of the
tensioner, the hole is tapped to
accept the SO5-F and SO6-F
shafts.
HORIZONTAL MOUNT TENSIONER
Brewer Approx.
Part A B C D E F G H J K L M
Weight
No. Interchange (in) (in) (UNF) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
HMT MHL 12 1/2 3 1"-14 2 1/2 3 1/2 1/2 2 1/2 7/8 1 3/4 2 3/4 3 1/2 7/8 11.57
Idler shaft must be ordered separately. For shaft selection see page 20.
www.IDC-USA.com • Phone: 317-244-9200
9
12. HEAVY DUT Y TENSIONERS
C
The HDBB1 Tensioner is H
designed for heavy duty L J B
drives and has a travel up
to 6" through the use of D E G E F
A
the adjusting slots. The
head is drilled to accept
a 2" shaft. The shaft is
mounted straight out from K
the face and is anchored M
by set screws. N
HEAVY DUTY TENSIONERS
Brewer Approx.
Part A B C D E F G H J K L M N
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
HDBB1 BB1 20 4 2 3 1/2 6 2 2 1/2 13/16 2 4 4 1/2 1 1/4 3/4 36.93
Idler shaft must be ordered separately. For shaft selection see page 20.
The HDBB2 Tensioner is
H
designed for heavy duty
drives and has a travel up B J B
to 6" through the use of
the adjusting slots. The D E G E F
head is drilled to accept A
a 2" shaft. The shaft is L
mounted to the side at 90°
and is anchored by set K
screws.
M
C
N
HEAVY DUTY TENSIONERS
Brewer Approx.
Part A B C D E F G H J K L M N
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
HDBB2 BB2 20 1/4 4 2 3 3/4 6 2 2 1/2 13/16 2 4 3/4 4 1/2 1 1/4 3/4 40.03
Idler shaft must be ordered separately. For shaft selection see page 20.
www.IDC-USA.com • Phone: 317-244-9200
10
13. HEAVY DUTY TENSIONERS
The HDBB3 Tensioner C
L
is designed for heavy H
duty drives and has a
travel up to 6" through J B
the use of the adjusting
slots. The head is drilled
F E D D E F
to accept a 2" shaft and
A
is located in the center
of the part in between
the adjusting slots. The
K
shaft is anchored by set
M
screws.
N
HEAVY DUTY TENSIONERS
Brewer Approx.
Part A B C D E F G H J K L M N
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
HDBB3 BB3 23 4 2 3 1/2 6 2 - 13/16 2 4 4 1/2 1 1/4 3/4 38.32
Idler shaft must be ordered separately. For shaft selection see page 20.
C H
The HDBB4 Tensioner is J
designed for heavy duty
L G B
drives and has a travel up
to 6" through the use of the J
adjusting slots. The head is H
drilled to accept a 2" shaft. D E F
The shaft is mounted straight A
out from the face and the
adjusting slots are parallel
to one another. The shaft is K
anchored by set screws. M
N
HEAVY DUTY TENSIONERS
Brewer Approx.
Part A B C D E F G H J K L M N
Weight
No. Interchange (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
(lbs)
HDBB4 BB4 10 1/2 5 1/2 2 3 1/2 6 1 - 13/16 2 4 4 1/2 1 1/4 3/4 26.83
Idler shaft must be ordered separately. For shaft selection see page 20.
www.IDC-USA.com • Phone: 317-244-9200
11
14. QD® IDLER BUSHINGS
QD® Style Idler
Bushings are used
with products such
as: sheaves, roller
chain sprockets,
synchronous belt
sprockets and any
item that accepts a
QD® Style Bushing.
QD® IDLER BUSHING (BALL BEARING) QD® IDLER BUSHING (NEEDLE BEARING)
Approx. Approx.
Part A B C D E Part A B C D E
Weight Weight
No. (in) (in) (in) (in) (in) No. (in) (in) (in) (in) (in)
(lbs) (lbs)
SH-BB 2 11/16 1 5/16 5/8 1 7/8 7/16 1.2 SH-NB 2 11/16 1 5/16 1 1 7/8 7/16 1.2
SH-BB-7/16++ 2 11/16 1 5/16 7/16 1 7/8 7/16 1.2 SDS-NB 3 1/8 1 5/16 1 2 3/16 7/16 1.5
SH-BB-1/2++ 2 11/16 1 5/16 1/2 1 7/8 7/16 1.2 SD-NB 3 1/8 1 13/16 1 2 3/16 7/16 1.7
SDS-BB 3 1/8 1 5/16 5/8 2 3/16 7/16 1.5 SK-NB 3 7/8 1 15/16 1 2 13/16 9/16 3
SD-BB 3 1/8 1 13/16 5/8 2 3/16 7/16 1.7 SF-NB 4 5/8 2 1/16 1½ 3 1/8 5/8 3.3
SK-BB 3 7/8 1 15/16 3/4 2 13/16 9/16 3 E-NB 6 2 3/4 1½ 3.834 7/8 14
SK-BB HD 3 7/8 1 15/16 3/4 2 13/16 9/16 3 Bushings are furnished with bearings and fasteners.
SF-BB 4 5/8 2 1/16 1 3 1/8 5/8 3.2
E-BB 6 2 3/4 1 3/8 3.834 7/8 9.1
F-BB 6 5/8 3 5/8 1 1/2 4 7/16 7/8 14.3
Bushings are furnished with bearings and fasteners. See page 24 for
engineering specifications. *QD® is a registered trademark of Emerson
Electric. ++ Comes with bolts and jam nuts.
TAPERED IDLER BUSHINGS
Taper-Lock® Style
Idler Bushings are
used with products
such as: sheaves,
roller chain sprockets,
synchronous belt
sprockets and any
item that accepts a
Taper-Lock® Style
Bushing.
TAPERED IDLER BUSHING TAPERED IDLER BUSHING
(BALL BEARING) (NEEDLE BEARING)
Brewer Approx. Brewer Approx.
Part A B C Part A B C
Weight Weight
No. Interchange (in) (in) (in) No. Interchange (in) (in) (in)
(lbs) (lbs)
1610-BB 1610-B 2 1/4 1 5/8 0.9 1610-NB 1610-F 2 1/4 1 1 0.7
1615-BB 1615-B 2 1/4 1 1/2 5/8 1.1 1615-NB 1615-F 2 1/4 1 1/2 1 1
2012-BB 2012-B 2 3/4 1 1/4 3/4 1.6 2012-NB 2012-F 2 3/4 1 1/4 1 1.5
2012-BBx1 — 2 3/4 1 1/4 1 1.8 2517-NB 2517-F 3 3/8 1 3/4 1 1/2 2.75
2517-BB — 3 3/8 1 3/4 1 3 Bushings are furnished with bearings and fasteners.
Bushings are furnished with bearings and fasteners.
See page 24 for engineering specifications.
*Taper-Lock® is a registered trademark of Rockwell Automation.
www.IDC-USA.com • Phone: 317-244-9200
12
15. SPLIT TAPER™ IDLER BUSHINGS
Split TaperTM Idler
Bushings are used
with products such as:
sheaves, roller chain
sprockets, synchronous
belt sprockets and any
item that accepts a Split
TaperTM Style Bushing.
Typical installation (bolt
& nuts not included
unless otherwise noted)
SPLIT TAPERTM STYLE IDLER BUSHING
Browning Approx.
Part A B C D E
Weight
No. Interchange (in) (in) (in) (in) (in)
(lbs)
H-BB IDH1-1/2 2 1/2 1 1/4 1/2 1 5/8 1/4 1
P1-BB IDP1-5/8 3 1 15/16 5/8 1 15/16 13/32 1.5
B-BB — 3 11/16 1 15/16 3/4 2 5/8 1/2 2
Q1-BB 3/4" IDQ1-3/4 4 1/8 2 1/2 3/4 2 7/8 17/32 3.5
Q1-BB 1" IDQ1-1 4 1/8 2 1/2 1 2 7/8 17/32 3.8
R1-BB IDR1-1 1/2 5 3/8 2 7/8 1 1/2 4 5/8 8.7
*Split Taper™ is a Trademark of Emerson Electric.
STAMPED STEEL IDLERS
STAMPED STEEL V-BELT IDLER PULLEY STAMPED STEEL FLAT BELT
Approx. IDLER PULLEY
Part Belt A B C D
Wt. Approx.
No. Size (in) (in) (in) (in) Part Face A B C D
(lbs) Wt.
No. Width (in) (in) (in) (in)
VIP3 .375 A 0.86 3 1/2 3/8 23/32 0.66 (lbs)
VIP3 .500 A 0.86 3 1/2 1/2 23/32 0.66 FIP4 .500 1 1 7/16 4 3/4 1/2 23/32 1.22
VIP3 .625 A 0.86 3 1/2 5/8 23/32 0.66 FIP4 .625 1 1 7/16 4 3/4 5/8 23/32 1.22
VIP5 .500 B-C 1.31 5 1/16 1/2 23/32 1.13
VIP5 .625 B-C 1.31 5 1/16 5/8 23/32 1.13
VIP7 .500 B-C 1.31 7 5/16 1/2 23/32 2.14
VIP7 .625 B-C 1.31 7 5/16 5/8 23/32 2.14
www.IDC-USA.com • Phone: 317-244-9200
13
16. STAMPED STEEL Idler Pulleys
ZINC PLATED stamped steel v-belt idler pulleys
double row bearings
Part A B C D E
Gauge
No. (in) (in) (in) (in) (in)
DVIP-525-C 1.37 5 1/4 *** 1 1/4 C 13
DVIP-731-C 1.37 7 5/16 *** 1 1/4 C 13
DVIP-900-C 1.37 9 *** 1 1/4 C 13
*** “C” refers to the bore diameter of the pulley. All of these pulleys are available with 1/2", 5/8",
and 3/4" bore diameters.
ZINC PLATED stamped steel flat flanged idler
pulleys double row bearings
Part A B C D E F
Gauge
No. (in) (in) (in) (in) (in) (in)
DFIP-575-200 2.48 5 3/4 *** 1 1/4 2 5 13
DFIP-675-162 2.06 6 3/4 *** 1 1/4 1.62 6 13
DFIP-675-200 2.48 6 3/4 *** 1 1/4 2 6 13
DFIP-900-150 2.03 9 *** 1 1/4 1 1/2 8 13
*DFIP-900-162 - 9 *** 1 1/4 1.62 8 13
DFIP-900-200 2.57 9 *** 1 1/4 2 8 13
DFIP-1000-262 3.31 10 *** 1 1/4 2.62 10 13
DFIP-1000-325 3.87 10 *** 1 1/4 3 1/2 10 13
* Flange on one side only
*** “C” refers to the bore diameter of the pulley. All of these pulleys are available with 1/2", 5/8",
and 3/4" bore diameters.
ZINC PLATED stamped steel straight faced idler
pulleys double row bearings
Part A B C D
Gauge
No. (in) (in) (in) (in)
DSFIP-500-200 2 5 *** 1 1/4 13
DSFIP-500-225 2 1/4 5 *** 1 1/4 13
DSFIP-500-250 2 1/2 5 *** 1 1/4 13
DSFIP-500-300 3 5 *** 1 1/4 13
DSFIP-500-325 3 1/4 5 *** 1 1/4 13
DSFIP-650-200 2 6 1/2 *** 1 1/4 13
DSFIP-650-225 2 1/4 6 1/2 *** 1 1/4 13
DSFIP-650-250 2 1/2 6 1/2 *** 1 1/4 13
DSFIP-650-300 3 6 1/2 *** 1 1/4 13
DSFIP-650-325 3 1/4 6 1/2 *** 1 1/4 13
DSFIP-650-350 3 1/2 6 1/2 *** 1 1/4 13
DSFIP-800-200 2 8 *** 1 1/4 13
DSFIP-800-225 2 1/4 8 *** 1 1/4 13
DSFIP-800-250 2 1/2 8 *** 1 1/4 13
DSFIP-800-300 3 8 *** 1 1/4 13
DSFIP-800-325 3 1/4 8 *** 1 1/4 13
DSFIP-800-350 3 1/2 8 *** 1 1/4 13
*** “C” refers to the bore diameter of the pulley. All of these pulleys are available with 1/2", 5/8",
and 3/4" bore diameters.
www.IDC-USA.com • Phone: 317-244-9200
14
17. V-BELT Idler Pulleys
zinc plated v-belt idler pulleys
Single Row Bearings
Part Belt A B C D
Gauge
No. Size (in) (in) (in) (in)
vip350-375-a A 0.84 3 1/2 3/8 0.720 14
vip350-500-a A 0.84 3 1/2 1/2 0.720 14
vip350-625-a A 0.84 3 1/2 5/8 0.720 14
vip400-500-a A 0.84 4 1/2 0.720 14
vip400-625-a A 0.84 4 5/8 0.720 14
vip437-500-b B 1.00 4.37 1/2 0.720 14
vip437-625-b B 1.00 4.37 5/8 0.720 14
vip500-500-ab AB 1.00 5 1/2 0.720 14
vip500-625-ab AB 1.00 5 5/8 0.720 14
vip506-500-bc BC 1.31 5.06 1/2 0.720 14
vip506-625-bc BC 1.31 5.06 5/8 0.720 14
vip525-500-c C 1.31 5 1/4 1/2 0.720 14
vip525-625-c C 1.31 5 1/4 5/8 0.720 14
vip625-500-b B 1.00 6 1/4 1/2 0.720 14
vip625-625-b B 1.00 6 1/4 5/8 0.720 14
vip625-500-c C 1.31 6 1/4 1/2 0.720 14
vip625-625-c C 1.31 6 1/4 5/8 0.720 14
vip625-500-d D 1.62 6 1/4 1/2 0.720 14
vip625-625-d D 1.62 6 1/4 5/8 0.720 14
vip675-500-b B 1.00 6 3/4 1/2 0.720 14
vip675-625-b B 1.00 6 3/4 5/8 0.720 14
vip731-500-bc BC 1.31 7.31 1/2 0.720 14
vip731-625-bc BC 1.31 7.31 5/8 0.720 14
vip731-500-c C 1.31 7.31 1/2 0.720 14
vip731-625-c C 1.31 7.31 5/8 0.720 14
vip805-500-5v 5V 1.06 8.047 1/2 0.720 14
vip805-625-5v 5V 1.06 8.047 5/8 0.720 14
vip856-500-5v 5V 1.12 8.56 1/2 0.720 14
vip856-625-5v 5V 1.12 8.56 5/8 0.720 14
vip900-500-c C 1.31 9 1/2 0.720 14
vip900-625-c C 1.31 9 5/8 0.720 14
vip950-500-5v 5V 1.12 9 1/2 1/2 0.720 14
vip950-625-5v 5V 1.12 9 1/2 5/8 0.720 14
Idler Pulleys with double row bearings also available
www.IDC-USA.com • Phone: 317-244-9200
15