Bce Don Sandeen Presentation
•
0 likes•244 views
Belilove Company engineers produces high precision components for the semiconductor, medical, analytical, and solar industries. Products include bake/chill platens, thermocouples, heaters, and brazed assemblies. Engineering services include design support, prototyping, testing, and volume manufacturing. Belilove has over 15 years of experience meeting the thermal control needs for various industries.
Report
Share
Report
Share
Download to read offline
Recommended
Presentation2
The document describes three scientific instruments:
1. A hot air oven with a temperature range of 50-250°C, double-walled aluminum/stainless steel interior, and heating elements along the bottom and sides.
2. An incubator with a temperature range of 37-70°C, double-walled construction, and heating elements along the bottom and sides.
3. A muffle furnace with a maximum working temperature of 900°C, ceramic fiber wool insulation, kanthal wire heating elements, and digital temperature control.
BCE’s Vacuum Ring Heater
Providing uniform heat to semiconductor devices in degassing chambers is essential in extracting impurities. This can only be achieved if a heating device has the proper fit and temperature uniformity for a given chamber. It is for this very application that BCE was approached by a large semiconductor company from Silicon Valley. In order to heat this company’s semiconductor wafers, it was critical that the heating device be manufactured to fit precisely into a large and circular degassing chamber posing manufacturing challenges due to dimensional and application parameters. BCE was able to provide extensive design consultations, 3D CAD modeling and lean manufacturing capabilities to this semiconductor giant at a competitive price. All these services were rendered while catering to all requirements needed to successfully manufacture their products.
product
The document describes several laboratory equipment manufactured by Ashok United Scientific Company including hot air ovens, incubators, and a muffle furnace. The hot air ovens and incubators have double-walled aluminum or stainless steel interiors and temperature ranges from 50-250°C and 37-70°C respectively. The BOD incubator is castor wheel mounted with a stainless steel interior, temperature range of 5-60°C, and fans for temperature uniformity. The muffle furnace has a maximum working temperature of 900°C controlled digitally.
Instantaneous 3 Phase Electric Water Heater
We are Australia’s leading suppliers of Hot Water Heat Pumps, Water Heaters, Room Heaters and Water Filters.
Electric motor thermal analysis trade study
A thermal analysis was performed on a large 10 HP electric motor to estimate the maximum case temperature during operation at 70% efficiency. The analysis accounted for heat transfer through natural convection from exposed surfaces to the dirty ambient air environment, and conduction through the motor mounting plate. The results showed that using an aluminum housing instead of the baseline steel housing provided a considerable cooling advantage and lower operating temperatures.
Electric aplience
This document provides information about heaters and electric irons. It describes the parts and operation of exposed element heaters, including the coiled heating element, porcelain plate, and thermostat. It also discusses automatic and steam irons, detailing their components like the sole plate, heating element, and water tank. Maintenance tips are provided, such as using distilled water and cleaning mineral deposits from steam irons. The document concludes with explanations of bi-metal and adjustable thermostat switches.
Energy star version 3.0
Powerpoint accompanying workshop session from the Homeless and Housing Coalition of Kentucky's 2013 conference. Presented by
Josh Trent, Director of Communities & Design at Frontier Housing will discuss his success at reducing the construction
cycle time by more than 50%, and Frontier Housing’s award winning success at constructing homes to exceed the
Energy Star Standard.
Ls Is Your Hot H20 Too Hot
Household water should be set to no higher than 120°F to prevent scalding burns, especially to children and the elderly. Water heaters are often factory set to 140°F, but 120°F is sufficient for most homes and saves on energy costs. The temperature control can be found in different locations depending on the type of water heater. While 120°F prevents scalding and saves energy, some households may need 140°F water to prevent Legionnaires' disease or for certain dishwashers to function properly. These households should install anti-scald mixing valves.
Recommended
Presentation2
The document describes three scientific instruments:
1. A hot air oven with a temperature range of 50-250°C, double-walled aluminum/stainless steel interior, and heating elements along the bottom and sides.
2. An incubator with a temperature range of 37-70°C, double-walled construction, and heating elements along the bottom and sides.
3. A muffle furnace with a maximum working temperature of 900°C, ceramic fiber wool insulation, kanthal wire heating elements, and digital temperature control.
BCE’s Vacuum Ring Heater
Providing uniform heat to semiconductor devices in degassing chambers is essential in extracting impurities. This can only be achieved if a heating device has the proper fit and temperature uniformity for a given chamber. It is for this very application that BCE was approached by a large semiconductor company from Silicon Valley. In order to heat this company’s semiconductor wafers, it was critical that the heating device be manufactured to fit precisely into a large and circular degassing chamber posing manufacturing challenges due to dimensional and application parameters. BCE was able to provide extensive design consultations, 3D CAD modeling and lean manufacturing capabilities to this semiconductor giant at a competitive price. All these services were rendered while catering to all requirements needed to successfully manufacture their products.
product
The document describes several laboratory equipment manufactured by Ashok United Scientific Company including hot air ovens, incubators, and a muffle furnace. The hot air ovens and incubators have double-walled aluminum or stainless steel interiors and temperature ranges from 50-250°C and 37-70°C respectively. The BOD incubator is castor wheel mounted with a stainless steel interior, temperature range of 5-60°C, and fans for temperature uniformity. The muffle furnace has a maximum working temperature of 900°C controlled digitally.
Instantaneous 3 Phase Electric Water Heater
We are Australia’s leading suppliers of Hot Water Heat Pumps, Water Heaters, Room Heaters and Water Filters.
Electric motor thermal analysis trade study
A thermal analysis was performed on a large 10 HP electric motor to estimate the maximum case temperature during operation at 70% efficiency. The analysis accounted for heat transfer through natural convection from exposed surfaces to the dirty ambient air environment, and conduction through the motor mounting plate. The results showed that using an aluminum housing instead of the baseline steel housing provided a considerable cooling advantage and lower operating temperatures.
Electric aplience
This document provides information about heaters and electric irons. It describes the parts and operation of exposed element heaters, including the coiled heating element, porcelain plate, and thermostat. It also discusses automatic and steam irons, detailing their components like the sole plate, heating element, and water tank. Maintenance tips are provided, such as using distilled water and cleaning mineral deposits from steam irons. The document concludes with explanations of bi-metal and adjustable thermostat switches.
Energy star version 3.0
Powerpoint accompanying workshop session from the Homeless and Housing Coalition of Kentucky's 2013 conference. Presented by
Josh Trent, Director of Communities & Design at Frontier Housing will discuss his success at reducing the construction
cycle time by more than 50%, and Frontier Housing’s award winning success at constructing homes to exceed the
Energy Star Standard.
Ls Is Your Hot H20 Too Hot
Household water should be set to no higher than 120°F to prevent scalding burns, especially to children and the elderly. Water heaters are often factory set to 140°F, but 120°F is sufficient for most homes and saves on energy costs. The temperature control can be found in different locations depending on the type of water heater. While 120°F prevents scalding and saves energy, some households may need 140°F water to prevent Legionnaires' disease or for certain dishwashers to function properly. These households should install anti-scald mixing valves.
Integrative high pressure solar water heater
Haiyan Uniepu Trading Co., Ltd is a subsidiary of Uniepu Electric Co., Ltd that manufactures and sells solar water heaters, solar panels, and other renewable energy products. They have over 500 employees including an in-house R&D team. Their product line includes solar water heaters, LED lighting, and solar panels. They export to several countries and aim to provide renewable energy solutions and quality customer service.
Termofuse nec_jm
The document provides information about SEFUSE thermal cutoff devices, including:
1) SEFUSE devices protect electrical appliances and equipment from fire by opening the electrical circuit when ambient temperatures rise abnormally.
2) There are two types, SF uses an organic pellet and operates from 73-240°C, while SM uses a fusible alloy and operates from 70-187°C.
3) SEFUSE devices are compact, durable, reliable, sensitive to temperature rises, and stable. They meet many safety standards and are available in various ratings to suit different applications like heaters, appliances, electronics, and industrial equipment.
Marth_Final Report
The document describes an electromagnetic induction water heater design project. The team improved upon a "straight-shot" design from previous years to meet requirements of heating water from 20°C to 80°C with 100 kW power input. Testing showed stainless steel heated faster than aluminum. The final design uses a 410 ferritic stainless steel pipe and twisted tape turbulator inside a copper coil. Further work is needed to design an effective circuit to match impedances and maximize efficiency. Manufacturing costs were estimated, but further design optimization is required before production.
Cartridge Heaters – Specifications, Configuration and Applications
Types of Cartridge Heaters, Applications of Cartridge Heater, Cartridge Heater based Assemblies, Performance Options of Cartridge Heaters, Standard Cartridge Heater Configuration and lead options of cartridge heaters.
Geothermal Power Plant Design
The document discusses the design of geothermal power plants. It begins with an overview of geothermal basics, including the advantages and disadvantages of geothermal power. It then discusses different types of plant designs, including direct steam, flash, binary, geopressured, and hypersaline plants. The remainder of the document focuses on design challenges such as resource conditions, plant sizing, and process selection. It provides examples of different plant designs and components. In the end, it notes that plant design involves balancing thermal efficiency against cost based on factors like the number of flashes, heat exchange area, process fluid, equipment used, and whether wells are free-flowing or pumped.
obturation techniques.ppt
This document describes various obturation techniques used to fill root canals. It discusses techniques such as single cone, cold lateral compaction, warm gutta percha techniques including System B and Touch n' Heat, sectional compaction, thermomechanical compaction, and others. It provides details on the classification, materials used, and procedures for different obturation methods.
obturation techniques
This document describes various obturation techniques used to fill root canals. It discusses techniques such as single cone, cold lateral compaction, warm gutta percha techniques including System B and Touch n' Heat, sectional compaction, thermomechanical compaction, and others. It provides details on the classification, materials used, and procedures for different obturation methods.
Advanced Energy Transfer Systems Thermoset Molding
Heating injection thermoset molds in a uniform manner to achieve near isothermal mold face conditions is a critical requirement for dimensionally sensitive engineered products.
This presentation will highlight a case study that will address a technologically advanced heating system which provides near isothermal mold face conditions in conjunction with rapid thermal energy throughput.
This system offers faster overall molding cycles,more consistent product performance outcomes,
simplified maintenance and reduced downtime.
Brazing with Induction Heating
Learn more about the benefits of #brazing with induction heating. Benefits include precision, speed and repeatability.
Thermowells & Accessories
Thermowells are protective tubes used to house temperature sensors in harsh industrial environments. They can be made from various corrosion-resistant materials in different styles. Key considerations in thermowell selection include insertion length for accurate temperature measurement, bore diameter to fit the sensor, and vibration resistance. Thermowell accessories include connection heads, terminal blocks, and fittings to integrate the sensor into process piping or vessels. Tempsens provides custom thermowells and accessories for applications up to 17,000°C along with quality certification and packaging for protection during shipping.
AluCellTech Cooling Fins 310117
Magnetic cooling fins can be attached to aluminum reduction cell potshells to increase heat removal and improve potlife. The fins extend the cooling zone up to 65 mm from the shell into cooler air, increasing the thickness of the protective frozen bath ledge along the sidewall. Tests show fins reduce average surface temperature at a given heat output. Different sized fins allow fitting between existing steel fins on potshells. The fins are manually affixed using magnets and can be used below 550 degrees Celsius.
Choosing Temperature Sensors for HVAC and Chiller Equipment
Efficient operation of industrial HVAC and chiller equipment depends upon optimum temperatures of refrigerant and lubricating oil at various phases of the refrigeration cycle. The most common sensors for this purpose utilize negative temperature coefficient (NTC) thermistors of various resistance values. NTC sensor devices exhibit lower electrical resistance when exposed to higher temperatures.
TOP QUALITY Representante F.A.T.I
F.A.T.I. is an Italian company established in 1945 that designs, produces, and sells various types and sizes of heating elements. It has expanded its production capabilities and markets over time. The company's product range includes tubular heating elements, immersion heaters, flanged heaters, duct heaters, electric exchangers, control panels, and convector heaters. F.A.T.I. aims to provide high-quality, reliable heating solutions and exports over 30% of its production worldwide.
Agnee E-catalouge Furnace
Agnee Engineering designs and manufactures a wide range of industrial furnaces and ovens including heat treatment furnaces, melting furnaces, and drying ovens. They have decades of experience and expertise in thermal technology. They provide customized, energy efficient solutions and turnkey installations. Their product lines include chamber furnaces, boogie hearth furnaces, pit-pot furnaces, vacuum furnaces, rotary retort furnaces, and more. They aim to incorporate the latest technologies and provide quality products and service to customers.
Agnee e catalouge furnace
Agnee Engineering designs and manufactures a wide range of industrial furnaces and ovens including heat treatment furnaces, melting furnaces, and drying ovens. They specialize in turnkey installations and have decades of experience in customizing solutions to meet clients' needs. Their product range includes chamber furnaces, boogie hearth furnaces, pit-pot furnaces, vacuum furnaces, rotary retort furnaces, and more. Agnee strives to incorporate the latest thermal technologies into their designs.
heating-cooling units
This document contains information about various pool heating and cooling equipment, including:
1. An air/water heating/cooling pump that can extend the swim season and keep pool water comfortable year-round.
2. A G2 heat exchanger with a titanium tube bundle and stainless steel shell for efficient heat transfer between primary and secondary water circuits.
3. An Evolution electric pool heater that is fully equipped and easy to install for heating chlorinated pools.
Aluminium Cast Electric Heating Elements
One of the least known applications of Electricfor's Electric Heating Elements, which is directly related to ATEX certification in explosive environments, is plastic injection.
AluCellTech summary flyer 121216
Upgrading aluminium reduction cell components like anode nails, copper collector bars, cathode nails, and nickel stem plating can save power, improve current distribution, reduce pot noise, and extend potlife. Magnetic potshell cooling fins and blankets can also help increase amperage, save power, remove more heat from potshells, and improve current distribution over cathode surfaces. AluCellTech provides services and products for upgrading cell components and performing thermal imaging and analysis of potlines.
Cryogenic hardening
This document discusses cryogenic hardening, which involves cooling steels to around -185°C to increase hardness and strength. It can be done after initial quenching using liquid nitrogen systems. This causes austenite to transform to martensite and precipitates microscopic carbides. The process involves cooling, soaking, and warming stages to transform the crystal structure. Benefits include improved wear resistance, dimensional stability, and hardness, while drawbacks include high costs. Applications include cutting tools, medical devices, and aerospace components.
A Thesis on Design Optimization of Heat Sink in Power Electronics
The heat sinks are used in electronic systems to remove heat from the chip and effectively transfer it to the ambient. The heat sink geometry is designed by the mechanical engineers with the primary aim of reducing the thermal resistance of the heat sink for better cooling in the electronic systems. Due to the proximity of the heat sink with the ICs, the RF fields created by RF currents in the ICs/PCBs gets coupled to heat sinks. Hence, the coupled RF current can cause radiated emission. This radiated noise from the device can couple and disturb the functioning of the nearby electronic systems. Also this radiated emission from the device poses a problem to the system compliance with respect to EMI/EMC regulations. The international EMI/EMC standards require the radiated emission from the electronic devices to be kept below the specified limits. As a result the design of Heat Sink is very important factor for the efficient operation of the electronic equipment. In this project design optimization of a Heat sink in a Power amplifier is performed to reduce the weight and size .Power amplifier is electronic equipment mounted in an army vehicle. The power modules inside the amplifier generates a heat of 1440 Watts and a temperature of 140 0c.Two Heat sinks are used to dissipate the heat generated inside the equipment and maintain a temperature of less than 850c. The existing heat sink which is being used is weighing around 10.3kgs and height of 51mm; as a result the unit is very robust. The objective of my project is To design & optimize the heat sink to reduce the weight and size. The optimized heat sink should also dissipate heat generated by power modules and maintain a temperature of less than 850c inside. To achieve the design a steady state thermal analysis will be performed on the heat sink and plot the Temperature distribution on the fins. Based on the above analysis results we will increase/decrease the number of fins, thickness of fins, and height of fins to reduce the weight of the heat sink. We will perform CFD analysis of the power amplifier by mounting the optimized heat sink and plot temperature, pressure and velocity distribution in the power amplifier enclosure. Efforts are made to optimize temperature, pressure and velocity distribution in the power amplifier enclosure by reorienting the power modules in the enclosure. UNIGRAPHICS software is used for 3D modeling SOLID WORKS FLOW SIMULATION software is used for thermal and CFD analysis.
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
CALL 8867766396 SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA | DPBOSS GUESSING | TARA MATKA | KALYAN CHART | MATKA BOSS
More Related Content
Similar to Bce Don Sandeen Presentation
Integrative high pressure solar water heater
Haiyan Uniepu Trading Co., Ltd is a subsidiary of Uniepu Electric Co., Ltd that manufactures and sells solar water heaters, solar panels, and other renewable energy products. They have over 500 employees including an in-house R&D team. Their product line includes solar water heaters, LED lighting, and solar panels. They export to several countries and aim to provide renewable energy solutions and quality customer service.
Termofuse nec_jm
The document provides information about SEFUSE thermal cutoff devices, including:
1) SEFUSE devices protect electrical appliances and equipment from fire by opening the electrical circuit when ambient temperatures rise abnormally.
2) There are two types, SF uses an organic pellet and operates from 73-240°C, while SM uses a fusible alloy and operates from 70-187°C.
3) SEFUSE devices are compact, durable, reliable, sensitive to temperature rises, and stable. They meet many safety standards and are available in various ratings to suit different applications like heaters, appliances, electronics, and industrial equipment.
Marth_Final Report
The document describes an electromagnetic induction water heater design project. The team improved upon a "straight-shot" design from previous years to meet requirements of heating water from 20°C to 80°C with 100 kW power input. Testing showed stainless steel heated faster than aluminum. The final design uses a 410 ferritic stainless steel pipe and twisted tape turbulator inside a copper coil. Further work is needed to design an effective circuit to match impedances and maximize efficiency. Manufacturing costs were estimated, but further design optimization is required before production.
Cartridge Heaters – Specifications, Configuration and Applications
Types of Cartridge Heaters, Applications of Cartridge Heater, Cartridge Heater based Assemblies, Performance Options of Cartridge Heaters, Standard Cartridge Heater Configuration and lead options of cartridge heaters.
Geothermal Power Plant Design
The document discusses the design of geothermal power plants. It begins with an overview of geothermal basics, including the advantages and disadvantages of geothermal power. It then discusses different types of plant designs, including direct steam, flash, binary, geopressured, and hypersaline plants. The remainder of the document focuses on design challenges such as resource conditions, plant sizing, and process selection. It provides examples of different plant designs and components. In the end, it notes that plant design involves balancing thermal efficiency against cost based on factors like the number of flashes, heat exchange area, process fluid, equipment used, and whether wells are free-flowing or pumped.
obturation techniques.ppt
This document describes various obturation techniques used to fill root canals. It discusses techniques such as single cone, cold lateral compaction, warm gutta percha techniques including System B and Touch n' Heat, sectional compaction, thermomechanical compaction, and others. It provides details on the classification, materials used, and procedures for different obturation methods.
obturation techniques
This document describes various obturation techniques used to fill root canals. It discusses techniques such as single cone, cold lateral compaction, warm gutta percha techniques including System B and Touch n' Heat, sectional compaction, thermomechanical compaction, and others. It provides details on the classification, materials used, and procedures for different obturation methods.
Advanced Energy Transfer Systems Thermoset Molding
Heating injection thermoset molds in a uniform manner to achieve near isothermal mold face conditions is a critical requirement for dimensionally sensitive engineered products.
This presentation will highlight a case study that will address a technologically advanced heating system which provides near isothermal mold face conditions in conjunction with rapid thermal energy throughput.
This system offers faster overall molding cycles,more consistent product performance outcomes,
simplified maintenance and reduced downtime.
Brazing with Induction Heating
Learn more about the benefits of #brazing with induction heating. Benefits include precision, speed and repeatability.
Thermowells & Accessories
Thermowells are protective tubes used to house temperature sensors in harsh industrial environments. They can be made from various corrosion-resistant materials in different styles. Key considerations in thermowell selection include insertion length for accurate temperature measurement, bore diameter to fit the sensor, and vibration resistance. Thermowell accessories include connection heads, terminal blocks, and fittings to integrate the sensor into process piping or vessels. Tempsens provides custom thermowells and accessories for applications up to 17,000°C along with quality certification and packaging for protection during shipping.
AluCellTech Cooling Fins 310117
Magnetic cooling fins can be attached to aluminum reduction cell potshells to increase heat removal and improve potlife. The fins extend the cooling zone up to 65 mm from the shell into cooler air, increasing the thickness of the protective frozen bath ledge along the sidewall. Tests show fins reduce average surface temperature at a given heat output. Different sized fins allow fitting between existing steel fins on potshells. The fins are manually affixed using magnets and can be used below 550 degrees Celsius.
Choosing Temperature Sensors for HVAC and Chiller Equipment
Efficient operation of industrial HVAC and chiller equipment depends upon optimum temperatures of refrigerant and lubricating oil at various phases of the refrigeration cycle. The most common sensors for this purpose utilize negative temperature coefficient (NTC) thermistors of various resistance values. NTC sensor devices exhibit lower electrical resistance when exposed to higher temperatures.
TOP QUALITY Representante F.A.T.I
F.A.T.I. is an Italian company established in 1945 that designs, produces, and sells various types and sizes of heating elements. It has expanded its production capabilities and markets over time. The company's product range includes tubular heating elements, immersion heaters, flanged heaters, duct heaters, electric exchangers, control panels, and convector heaters. F.A.T.I. aims to provide high-quality, reliable heating solutions and exports over 30% of its production worldwide.
Agnee E-catalouge Furnace
Agnee Engineering designs and manufactures a wide range of industrial furnaces and ovens including heat treatment furnaces, melting furnaces, and drying ovens. They have decades of experience and expertise in thermal technology. They provide customized, energy efficient solutions and turnkey installations. Their product lines include chamber furnaces, boogie hearth furnaces, pit-pot furnaces, vacuum furnaces, rotary retort furnaces, and more. They aim to incorporate the latest technologies and provide quality products and service to customers.
Agnee e catalouge furnace
Agnee Engineering designs and manufactures a wide range of industrial furnaces and ovens including heat treatment furnaces, melting furnaces, and drying ovens. They specialize in turnkey installations and have decades of experience in customizing solutions to meet clients' needs. Their product range includes chamber furnaces, boogie hearth furnaces, pit-pot furnaces, vacuum furnaces, rotary retort furnaces, and more. Agnee strives to incorporate the latest thermal technologies into their designs.
heating-cooling units
This document contains information about various pool heating and cooling equipment, including:
1. An air/water heating/cooling pump that can extend the swim season and keep pool water comfortable year-round.
2. A G2 heat exchanger with a titanium tube bundle and stainless steel shell for efficient heat transfer between primary and secondary water circuits.
3. An Evolution electric pool heater that is fully equipped and easy to install for heating chlorinated pools.
Aluminium Cast Electric Heating Elements
One of the least known applications of Electricfor's Electric Heating Elements, which is directly related to ATEX certification in explosive environments, is plastic injection.
AluCellTech summary flyer 121216
Upgrading aluminium reduction cell components like anode nails, copper collector bars, cathode nails, and nickel stem plating can save power, improve current distribution, reduce pot noise, and extend potlife. Magnetic potshell cooling fins and blankets can also help increase amperage, save power, remove more heat from potshells, and improve current distribution over cathode surfaces. AluCellTech provides services and products for upgrading cell components and performing thermal imaging and analysis of potlines.
Cryogenic hardening
This document discusses cryogenic hardening, which involves cooling steels to around -185°C to increase hardness and strength. It can be done after initial quenching using liquid nitrogen systems. This causes austenite to transform to martensite and precipitates microscopic carbides. The process involves cooling, soaking, and warming stages to transform the crystal structure. Benefits include improved wear resistance, dimensional stability, and hardness, while drawbacks include high costs. Applications include cutting tools, medical devices, and aerospace components.
A Thesis on Design Optimization of Heat Sink in Power Electronics
The heat sinks are used in electronic systems to remove heat from the chip and effectively transfer it to the ambient. The heat sink geometry is designed by the mechanical engineers with the primary aim of reducing the thermal resistance of the heat sink for better cooling in the electronic systems. Due to the proximity of the heat sink with the ICs, the RF fields created by RF currents in the ICs/PCBs gets coupled to heat sinks. Hence, the coupled RF current can cause radiated emission. This radiated noise from the device can couple and disturb the functioning of the nearby electronic systems. Also this radiated emission from the device poses a problem to the system compliance with respect to EMI/EMC regulations. The international EMI/EMC standards require the radiated emission from the electronic devices to be kept below the specified limits. As a result the design of Heat Sink is very important factor for the efficient operation of the electronic equipment. In this project design optimization of a Heat sink in a Power amplifier is performed to reduce the weight and size .Power amplifier is electronic equipment mounted in an army vehicle. The power modules inside the amplifier generates a heat of 1440 Watts and a temperature of 140 0c.Two Heat sinks are used to dissipate the heat generated inside the equipment and maintain a temperature of less than 850c. The existing heat sink which is being used is weighing around 10.3kgs and height of 51mm; as a result the unit is very robust. The objective of my project is To design & optimize the heat sink to reduce the weight and size. The optimized heat sink should also dissipate heat generated by power modules and maintain a temperature of less than 850c inside. To achieve the design a steady state thermal analysis will be performed on the heat sink and plot the Temperature distribution on the fins. Based on the above analysis results we will increase/decrease the number of fins, thickness of fins, and height of fins to reduce the weight of the heat sink. We will perform CFD analysis of the power amplifier by mounting the optimized heat sink and plot temperature, pressure and velocity distribution in the power amplifier enclosure. Efforts are made to optimize temperature, pressure and velocity distribution in the power amplifier enclosure by reorienting the power modules in the enclosure. UNIGRAPHICS software is used for 3D modeling SOLID WORKS FLOW SIMULATION software is used for thermal and CFD analysis.
Similar to Bce Don Sandeen Presentation (20)
Cartridge Heaters – Specifications, Configuration and Applications
Cartridge Heaters – Specifications, Configuration and Applications
Advanced Energy Transfer Systems Thermoset Molding
Advanced Energy Transfer Systems Thermoset Molding
Choosing Temperature Sensors for HVAC and Chiller Equipment
Choosing Temperature Sensors for HVAC and Chiller Equipment
A Thesis on Design Optimization of Heat Sink in Power Electronics
A Thesis on Design Optimization of Heat Sink in Power Electronics
Recently uploaded
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
CALL 8867766396 SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA | DPBOSS GUESSING | TARA MATKA | KALYAN CHART | MATKA BOSS
How MJ Global Leads the Packaging Industry.pdf
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
buy old yahoo accounts buy yahoo accounts
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
Company Valuation webinar series - Tuesday, 4 June 2024
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recruiting in the Digital Age: A Social Media Masterclass
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Understanding User Needs and Satisfying Them
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-inspired to the data-driven praxis (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Structural Design Process: Step-by-Step Guide for Buildings
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
This presentation provides a thorough examination of Over-the-Top (OTT) platforms, focusing on their development and substantial influence on the entertainment industry, with a particular emphasis on the Indian market.We begin with an introduction to OTT platforms, defining them as streaming services that deliver content directly over the internet, bypassing traditional broadcast channels. These platforms offer a variety of content, including movies, TV shows, and original productions, allowing users to access content on-demand across multiple devices.The historical context covers the early days of streaming, starting with Netflix's inception in 1997 as a DVD rental service and its transition to streaming in 2007. The presentation also highlights India's television journey, from the launch of Doordarshan in 1959 to the introduction of Direct-to-Home (DTH) satellite television in 2000, which expanded viewing choices and set the stage for the rise of OTT platforms like Big Flix, Ditto TV, Sony LIV, Hotstar, and Netflix. The business models of OTT platforms are explored in detail. Subscription Video on Demand (SVOD) models, exemplified by Netflix and Amazon Prime Video, offer unlimited content access for a monthly fee. Transactional Video on Demand (TVOD) models, like iTunes and Sky Box Office, allow users to pay for individual pieces of content. Advertising-Based Video on Demand (AVOD) models, such as YouTube and Facebook Watch, provide free content supported by advertisements. Hybrid models combine elements of SVOD and AVOD, offering flexibility to cater to diverse audience preferences.
Content acquisition strategies are also discussed, highlighting the dual approach of purchasing broadcasting rights for existing films and TV shows and investing in original content production. This section underscores the importance of a robust content library in attracting and retaining subscribers.The presentation addresses the challenges faced by OTT platforms, including the unpredictability of content acquisition and audience preferences. It emphasizes the difficulty of balancing content investment with returns in a competitive market, the high costs associated with marketing, and the need for continuous innovation and adaptation to stay relevant.
The impact of OTT platforms on the Bollywood film industry is significant. The competition for viewers has led to a decrease in cinema ticket sales, affecting the revenue of Bollywood films that traditionally rely on theatrical releases. Additionally, OTT platforms now pay less for film rights due to the uncertain success of films in cinemas.
Looking ahead, the future of OTT in India appears promising. The market is expected to grow by 20% annually, reaching a value of ₹1200 billion by the end of the decade. The increasing availability of affordable smartphones and internet access will drive this growth, making OTT platforms a primary source of entertainment for many viewers.
Recently uploaded (20)
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Company Valuation webinar series - Tuesday, 4 June 2024
Company Valuation webinar series - Tuesday, 4 June 2024
Recruiting in the Digital Age: A Social Media Masterclass
Recruiting in the Digital Age: A Social Media Masterclass
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Structural Design Process: Step-by-Step Guide for Buildings
Structural Design Process: Step-by-Step Guide for Buildings
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
Training my puppy and implementation in this story
Training my puppy and implementation in this story
Bce Don Sandeen Presentation
- 1. Belilove Company, Engineers 1 Products Manufactured for the Semiconductor, Medical, Analytical, and Solar Industry Don Sandeen @ BCE has been producing various high precision engineered components and heat/cool products for the semiconductor, analytical, medical, and the solar industry for over 15 years including: • Pedestal bake/chill platens for CVD, Etching, PVD, PhotoL, and Stripping • Thermocouples, Thermistors, RTD’s, and Controllers • Gas Line and Air Process Heaters • Circulation and Immersion Heaters • Filament, T/C, Thermistor, and Brazed Assemblies • Silicone, Etched Foil Kapton, and Hi-Temp Glasrope® Heaters ANALYTICAL MEDICAL SOLAR SEMICONDUCTOR STAINLESS 316 CUSTOM FIT FILAMENT ASSY ETCHED FOIL WAFER PLATE STAINLESS ELEMENT KAPTON HEATER CHILLER WITH FLANGE HIGH TEMP VACUUM BRAZED W360 ASSY EIGHT HEATER AL SERIES ASSY HUMIDIFIER 316SS ALUMINUM VACUUM CERAMIC BOARD FIN HEATER BRAZED 300MM ASSY WITH RTD GASLINE ASSY 2-ZONE ASSY March 3, 2011 Don Sandeen at BCE Confidential
- 2. Belilove Company, Engineers 2 MI CABLE HEATERS March 3, 2011 Don Sandeen at BCE Confidential
- 3. Belilove Company, Engineers 3 KAPTON AND SILICONE HEATERS March 3, 2011 Don Sandeen at BCE Confidential
- 4. Belilove Company, Engineers 4 HOTWATT HEATERS CARTRIDGE HEATER IN Cº 1/8”Ø x 1” March 3, 2011 Don Sandeen at BCE Confidential
- 5. Belilove Company, Engineers 5 THERMOCOUPLES-RTD’S-THERMISTORS March 3, 2011 Don Sandeen at BCE Confidential
- 6. Belilove Company, Engineers 6 VALUE ADDED SERVICES Engineering: Creation of solid models and detailed engineering drawings in collaboration with your engineering team Engineering Support: Design engineering support including creation of detailed assembly procedures, test methodology, development, and functional test plan development Prototype Manufacturing: Quick turnaround on initial samples to enable verification of design concepts Volume/Production Manufacturing: Lower overall cost of ownership to customers – quality, on time delivery, and competitive pricing Testing: Helium Leak Testing, Life Cycle Testing, X-Ray, Hipot and Current Leakage March 3, 2011 Don Sandeen at BCE Confidential
- 7. Don Sandeen @ Belilove Company-Engineers Applied Resistance Division Capabilities DON SANDEEN BELILOVE COMPANY-ENGINEERS (BCE) March 3, 2011 Don Sandeen at BCE Confidential