Automobile security system using digital password
•Download as DOC, PDF•
0 likes•39 views
This document describes an automobile security system using a digital password. The system includes a keypad to enter a password, an LCD display, and a microcontroller. The password is used to unlock the system and provide access to the automobile. Users can set their own password for added security protection. The system allows entry through electronic verification of a digital password rather than a traditional key or mechanical lock.
Report
Share
Report
Share
Recommended
Authentication
Authentication to access a computer system requires at least one of three factors: something you know like a password or PIN; something you possess like an ATM, smart, or security token; or something you are through biometric identification using fingerprints, iris scans, facial recognition, or hand geometry. Common methods include entering a password or PIN, using a smart card or security token, and providing biometric data to a fingerprint, iris, or facial recognition reader. A security token dynamically generates and displays changing passwords as an additional authentication method.
IoT and Fingerprint Based Door Looking System
This project presents a door locking system which suggests two ways for unlocking a door using Internet of Things (IoT) and Fingerprint. Most of the major door lock security systems have several loopholes which could be broken down to gain access to the desired places, and it creates a concern for a secure lifestyle and proper working environment. People can access Internet services by using their cell phone, laptop and various gadgets. Fingerprint is a reliable biometric feature having a wide range of applications that require authentication. Biometric systems such as fingerprint provide tools to enforce reliable logs of system transactions and protect an individual’s right to privacy. In the proposed system, fingerprints of the authorized users are enrolled and verified to provide access to a facility that is used by multiple users. A user can also be removed and a new user can be enrolled in the system. We have implemented a centralized control system from where we can control who can enter in which rooms and who cannot. This is an Arduino Mega device based. Fingerprints are stored dynamically in a database for computing the different statistics.
Advanced Security System for Bank Lockers using Biometric and GSM
This document proposes an advanced security system for bank lockers using biometric authentication and GSM technology. The system aims to provide more secure access to bank lockers than traditional key-based systems. It works by enrolling users through fingerprint scanning and storing their fingerprint data and mobile number in a database. When a user wants to open their locker, the system verifies their identity by matching their fingerprint and sends a one-time password via SMS to their registered mobile number. The user then enters this password to unlock the locker, providing two-factor authentication through biometrics and mobile verification. The system is designed to address security issues with lost or duplicated keys and keep pace with digital authentication methods.
FINGERPRINT BASED LOCKER WITH IMAGE CAPTURE
As we are moving in a World of advancement, so the security is the major concern in order to keep data isolate from the unauthorised users to access. In today’s World, we need high degree security system for the protection of our document, important data, as well as memory and jewellery. This review paper presents a secure fingerprint locker which is feasible. This system is proved successful on all norms of security of lockers. There are other methods of verifying authentication through password, RFID but this method is most efficient and reliable. To provide perfect security to the lockers and to make the work easier, this project is taking help of two different technologies, i.e. Embedded System and Biometrics. Biometrics is basically the measurement and use of unique characteristics of living beings to make them distinguish from one another. And this is more reliable then passwords and tokens which can be lost or stolen by the humans. In this paper we are providing the work done on this technique.
i-Secure - 3FA Smart Lock
The document presents a project on developing a three-factor authentication (3FA) smart lock system called iSecure. It discusses introducing RFID, PIN, and OTP for secure authentication. The system aims to provide secure access, fast authentication, and logs all attempts. Hardware components include a Raspberry Pi, touch screen, RFID reader, relay module, and electric lock. The system design includes a database to store user data and works through RFID detection, PIN verification, and OTP validation. Future work may include additional authentication methods and improvements to security, notifications, and customization.
IRJET- Smart Home Automation using IoT with Security Features
This document summarizes a research paper on designing a smart home automation system using IoT with security features. The proposed system uses an Arduino board connected to various sensors and appliances via relays to allow remote control and monitoring via a mobile app and cloud server. Security features like motion detection, alarms, and cameras are included to monitor the home remotely. The system is designed to be low cost while providing flexibility and security in controlling devices within the home using WiFi and password protection.
IRJET- Design and Implementation of Smart Home Security System based on IoT
The document summarizes a research paper on the design and implementation of a smart home security system using IoT. The proposed system uses fingerprint biometrics, a keypad, and a Wi-Fi app to control a door lock and provide access only to authorized individuals. An emergency alarm protects the system from unauthorized intruders. The system is accessed through different authentication methods and notifications are provided to users on who is entering and exiting the home. The smart lock allows convenient and secure access while monitoring activity and integrating with other smart devices in the home automation system.
Password Base Door Lock
This document describes the design and construction of a password-based digital door lock system. It lists the objectives as developing an intelligent lock that opens with the correct password and closes automatically after 5 seconds. It also aims to offer safe and secure access by keeping the door closed if the wrong password is entered and triggering a buzzer. The key hardware components needed are described as a 4x4 keypad, LCD, servo motor, Arduino Uno, ATmega328 microcontroller, power supply, breadboard, resistors, potentiometer and buzzer. Diagrams of the circuit and block are also provided, along with a flowchart of the working process.
Recommended
Authentication
Authentication to access a computer system requires at least one of three factors: something you know like a password or PIN; something you possess like an ATM, smart, or security token; or something you are through biometric identification using fingerprints, iris scans, facial recognition, or hand geometry. Common methods include entering a password or PIN, using a smart card or security token, and providing biometric data to a fingerprint, iris, or facial recognition reader. A security token dynamically generates and displays changing passwords as an additional authentication method.
IoT and Fingerprint Based Door Looking System
This project presents a door locking system which suggests two ways for unlocking a door using Internet of Things (IoT) and Fingerprint. Most of the major door lock security systems have several loopholes which could be broken down to gain access to the desired places, and it creates a concern for a secure lifestyle and proper working environment. People can access Internet services by using their cell phone, laptop and various gadgets. Fingerprint is a reliable biometric feature having a wide range of applications that require authentication. Biometric systems such as fingerprint provide tools to enforce reliable logs of system transactions and protect an individual’s right to privacy. In the proposed system, fingerprints of the authorized users are enrolled and verified to provide access to a facility that is used by multiple users. A user can also be removed and a new user can be enrolled in the system. We have implemented a centralized control system from where we can control who can enter in which rooms and who cannot. This is an Arduino Mega device based. Fingerprints are stored dynamically in a database for computing the different statistics.
Advanced Security System for Bank Lockers using Biometric and GSM
This document proposes an advanced security system for bank lockers using biometric authentication and GSM technology. The system aims to provide more secure access to bank lockers than traditional key-based systems. It works by enrolling users through fingerprint scanning and storing their fingerprint data and mobile number in a database. When a user wants to open their locker, the system verifies their identity by matching their fingerprint and sends a one-time password via SMS to their registered mobile number. The user then enters this password to unlock the locker, providing two-factor authentication through biometrics and mobile verification. The system is designed to address security issues with lost or duplicated keys and keep pace with digital authentication methods.
FINGERPRINT BASED LOCKER WITH IMAGE CAPTURE
As we are moving in a World of advancement, so the security is the major concern in order to keep data isolate from the unauthorised users to access. In today’s World, we need high degree security system for the protection of our document, important data, as well as memory and jewellery. This review paper presents a secure fingerprint locker which is feasible. This system is proved successful on all norms of security of lockers. There are other methods of verifying authentication through password, RFID but this method is most efficient and reliable. To provide perfect security to the lockers and to make the work easier, this project is taking help of two different technologies, i.e. Embedded System and Biometrics. Biometrics is basically the measurement and use of unique characteristics of living beings to make them distinguish from one another. And this is more reliable then passwords and tokens which can be lost or stolen by the humans. In this paper we are providing the work done on this technique.
i-Secure - 3FA Smart Lock
The document presents a project on developing a three-factor authentication (3FA) smart lock system called iSecure. It discusses introducing RFID, PIN, and OTP for secure authentication. The system aims to provide secure access, fast authentication, and logs all attempts. Hardware components include a Raspberry Pi, touch screen, RFID reader, relay module, and electric lock. The system design includes a database to store user data and works through RFID detection, PIN verification, and OTP validation. Future work may include additional authentication methods and improvements to security, notifications, and customization.
IRJET- Smart Home Automation using IoT with Security Features
This document summarizes a research paper on designing a smart home automation system using IoT with security features. The proposed system uses an Arduino board connected to various sensors and appliances via relays to allow remote control and monitoring via a mobile app and cloud server. Security features like motion detection, alarms, and cameras are included to monitor the home remotely. The system is designed to be low cost while providing flexibility and security in controlling devices within the home using WiFi and password protection.
IRJET- Design and Implementation of Smart Home Security System based on IoT
The document summarizes a research paper on the design and implementation of a smart home security system using IoT. The proposed system uses fingerprint biometrics, a keypad, and a Wi-Fi app to control a door lock and provide access only to authorized individuals. An emergency alarm protects the system from unauthorized intruders. The system is accessed through different authentication methods and notifications are provided to users on who is entering and exiting the home. The smart lock allows convenient and secure access while monitoring activity and integrating with other smart devices in the home automation system.
Password Base Door Lock
This document describes the design and construction of a password-based digital door lock system. It lists the objectives as developing an intelligent lock that opens with the correct password and closes automatically after 5 seconds. It also aims to offer safe and secure access by keeping the door closed if the wrong password is entered and triggering a buzzer. The key hardware components needed are described as a 4x4 keypad, LCD, servo motor, Arduino Uno, ATmega328 microcontroller, power supply, breadboard, resistors, potentiometer and buzzer. Diagrams of the circuit and block are also provided, along with a flowchart of the working process.
Design and Construction of Digital Locking System
This document outlines the design and construction of a digital locking system. It discusses objectives like creating an affordable and effective security system. A literature review covers the history of locks. The methodology describes the system's components like an Arduino, keypad, LCD display and relay interface. A block diagram and circuit diagram show how it works by checking codes and granting access for correct codes. The system was tested and found to work properly. It has applications in industries, buildings and other secure areas. Advantages include improved security while disadvantages include not being economical for multiple locations. The conclusion discusses how technology improves security systems.
IRJET - IoT based Home Automation System through Voice Control using Google A...
This document describes an IoT-based home automation system that allows control of electrical appliances using voice commands through a Google Assistant app. The system uses an Arduino microcontroller connected to ESP8266 WiFi modules and relays to control appliances. Users can control lights, fans, and other devices remotely using the Blynk app on their smartphone, which sends commands to the Arduino via ESP8266. This provides convenience and saves energy by automating appliance control. The system was tested successfully to control loads by voice commands through the Blynk and Google Assistant apps.
Smart Home Automation using Voice Assistant
The document presents a smart home monitoring system using voice assistants. The system allows users to control household devices and check their status, view interior camera snapshots, and receive alerts about temperature, fire or intruders via a voice assistant when away from home. It uses Arduino, ESP8266, cameras, and sensors to monitor a home and interfaces with APIs, Alexa/Google Assistant for voice control and alerts on any device with an internet connection. The system was found to be economically and technically feasible to develop within the given time frame and helps provide security and convenience for users.
Finger print based bank locker system
This document proposes a fingerprint-based bank locker system using biometric authentication. Fingerprint scanning would be used to identify authorized users, with fingerprints stored on an FIM 3030N fingerprint module interfaced to an 8051 microcontroller. When a user's fingerprint is scanned and matches a stored profile, they would then enter a unique ID via keypad to open their assigned locker. If an unauthorized fingerprint is scanned, a buzzer would sound as an alert. The system aims to provide more secure access to bank lockers than conventional key-based locks.
Home automation using android phones-Project 2nd phase ppt
This presentation will be useful for the Information science and Computer science students. It contains Use case diagrams, Activity diagrams and data flow diagrams along with details of other sensors.
IoT Home Automation System
The project titled ’IoT Home Automation System’ is designed and implemented using Arduino, PHP and MySQL. The project aims provide user with an automated means to control the devices in their homes using a web application from anywhere on the planet.
Finger print based bank locker system
This document describes a fingerprint-based bank locker system that uses biometrics for authentication. Fingerprint scanning is used to register and verify authorized users' fingerprints stored with unique IDs. When a fingerprint is scanned, it is verified against stored images and the user must also enter their unique ID. If authorized, the assigned locker will open, and a switch allows closing it. An interfaced buzzer will alert if an unauthorized person attempts access. The system includes a fingerprint scanner module connected to a microcontroller to control the scanning and authentication process.
Fingerprint based security system
This document provides a project definition for a fingerprint-based security system. The system will use an AT89C51 microcontroller to analyze fingerprint scans and activate a motor if an authorized fingerprint is detected. Fingerprint data will be stored on the microcontroller even without power. The system block diagram outlines the fingerprint sensor, oscillatory circuit, microcontroller, relay, motor driver and motor components. Software will include a device driver for fingerprint detection and motor control. Serial communication and LCD interfacing is also specified.
Bm 06 FINGER PRINT BASED SECURITY SYSTEM
aurdunio pprojects, microcontroller projects, microcontrollerprojects, aurdunio,ECE Projects, iot projects, Eletronics engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, live projects ameerpet, live projects near me, live projects institutes Hyderabad, electrical projects hyderabad, academic projects, student projects, final year student projects, btech projects,btech final year projects,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
internet of things
The document discusses the Internet of Things (IoT). It defines IoT as the network of devices that contain electronics, software and connectivity which allows them to connect and exchange data. The key components of IoT include devices/sensors that collect data, gateways that transmit data between networks, the cloud for data storage and processing, analytics to analyze data, and user interfaces for human access. Common IoT applications are then discussed, including using the NodeMCU and ESP8266 microcontroller board to build basic IoT projects like controlling an LED, reading temperature and humidity with a DHT11 sensor, and using a relay module.
Fingerprint base security system
This document describes a fingerprint-based security system that uses a microcontroller and fingerprint module to open a lock only for authorized users. The system scans a fingerprint and verifies it matches one stored on the microcontroller. If so, it activates a relay that opens the locked system. The fingerprint module can store up to 750 fingerprints and is connected to the microcontroller via a serial port. The system provides security for items like medications, jewelry, and documents without needing passwords.
Implement via Smart Home blynk
Nowadays Internet of Things (IoT) is part of the internet that all objects around us. IoT has a very wide and includes variety of objects like electronics product appliances and sensors [4] This research paper aims to design a smart home system by utilizing
Home Automation Over Internet Project (Ev Otomasyon Projesi)
System demonstration of a home automation project made by using Arduino by University Of Gaziantep students. (Arduino ile yapılmış ev otomasyonu projesi. Gaziantep Üniversitesi öğrencileri). Project Website: http://www.flowinweb.com
Android based security and home
The smart mobile terminal operator platform Android is getting popular all over the world with its wide variety of applications and enormous use in numerous spheres of our daily life. Considering the fact of increasing demand of home security and automation, an Android based control system is presented in this paper where the proposed system can maintain the security of home main entrance and also the car door lock. Another important feature of the designed system is that it can control the overall appliances in a room. The mobile to security system or home automation system interface is established through Bluetooth. The hardware part is designed with the PIC microcontroller.
Internet of Things (IoT) Based Smart Security & Home Automation System.
M A Sayed
Department of Electrical & Electronic Engineering
North Bengal International University, Rajshahi-6100
Helpline: 01744-563778
Power electronics embedded power system titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, mobile assisted living systems, water quality monitoring using GSM, speed and torque monitoring of induction motors, oxygen level monitoring, defect detection of printed circuit boards, hardware-based job queue management for many-core architectures, and FFT processors for MIMO-OFDM systems.
Building point of care health technologies on the ieee 11073 health device st...
The document describes a point of care health system built using IEEE 11073 health device standards and ZigBee health care profile guidelines from Continua Alliance. It implements four physiological devices and three environmental sensors to monitor frail elderly and diabetes patients. Experience shows the standards provide advantages like rapid development and a growing range of compatible commercial devices.
Bed side patients monitoring system with emergency alert
This document proposes a bedside patient monitoring system that measures temperature data using a portable medical monitoring unit containing a microcontroller, sensor board, and information processing system. The system takes a patient's temperature using a sensor, converts the analog data to digital using an ADC, and sends it to the microcontroller for processing. If the temperature exceeds a threshold value, the system sounds a buzzer for emergency indication.
Maquinas simples
El documento resume las características de diferentes máquinas simples como palancas, planos inclinados y cuñas. Explica que una máquina simple cumple la ley de conservación de la energía al transformar la energía en lugar de crearla o destruirla. Además, enumera ejemplos cotidianos del uso de máquinas simples como martillos, pinzas y péndulos.
future of family run businesses POV FINAL
The document discusses the unique strengths and challenges of family-run businesses. It outlines several advantages family-run businesses have over publicly owned companies, such as flexibility, long-term thinking, strong corporate culture and better labor relations. However, only 3% of family businesses survive into the fourth generation, as many struggle with succession planning and an inability to innovate and evolve with changing markets. The key challenge for long-term survival is preparing the business for continuous renewal and innovation beyond just running existing operations.
Seminar: Cost-effective Solutions for Complying with the CARE Act
Watch the presentation on demand: https://www.youtube.com/watch?v=7f2IvI3dSX0
Is your hospital ready for the Caregiver Advise, Record, Enable (CARE) Act? An effort spearheaded by AARP, the law requires hospitals to recognize the role of the caregiver and provide them with the necessary resources to deliver care after a patient has been discharged. Now that the law is being passed in a number of states, including New Jersey, what does this mean for hospitals and how can they comply with these new standards without breaking the bank?
Bob Gold, CEO of GoMo Health, and other members of his team led a seminar June 9th, 2015 focused on how technology can be used to cost-effectively comply with the CARE Act, increase HCAHPS scores, and motivate healthier behaviors among patient populations.
During this seminar attendees learned:
-How the CARE Act is affecting hospitals
-Effective methods for engaging patients and caregivers outside the hospital
-Strategic communications and mobile engagement tactics
-How to integrate human and digital interactions into one conversation
Learn more at http://gomohealth.com
Parte 1 del silabo
Este documento presenta la información sobre el silabo de la asignatura de Sociología Jurídica de la Facultad de Jurisprudencia de la Universidad Regional Autónoma de los Andes para el período 2015. Incluye los datos del curso como código, créditos, horas, docente responsable y pre-requisitos. Explica que el objetivo general es relacionar las estructuras sociales con el derecho y que los métodos de enseñanza incluyen clases magistrales, seminarios, prácticas de laboratorio, casos clínicos y trabajos
More Related Content
What's hot
Design and Construction of Digital Locking System
This document outlines the design and construction of a digital locking system. It discusses objectives like creating an affordable and effective security system. A literature review covers the history of locks. The methodology describes the system's components like an Arduino, keypad, LCD display and relay interface. A block diagram and circuit diagram show how it works by checking codes and granting access for correct codes. The system was tested and found to work properly. It has applications in industries, buildings and other secure areas. Advantages include improved security while disadvantages include not being economical for multiple locations. The conclusion discusses how technology improves security systems.
IRJET - IoT based Home Automation System through Voice Control using Google A...
This document describes an IoT-based home automation system that allows control of electrical appliances using voice commands through a Google Assistant app. The system uses an Arduino microcontroller connected to ESP8266 WiFi modules and relays to control appliances. Users can control lights, fans, and other devices remotely using the Blynk app on their smartphone, which sends commands to the Arduino via ESP8266. This provides convenience and saves energy by automating appliance control. The system was tested successfully to control loads by voice commands through the Blynk and Google Assistant apps.
Smart Home Automation using Voice Assistant
The document presents a smart home monitoring system using voice assistants. The system allows users to control household devices and check their status, view interior camera snapshots, and receive alerts about temperature, fire or intruders via a voice assistant when away from home. It uses Arduino, ESP8266, cameras, and sensors to monitor a home and interfaces with APIs, Alexa/Google Assistant for voice control and alerts on any device with an internet connection. The system was found to be economically and technically feasible to develop within the given time frame and helps provide security and convenience for users.
Finger print based bank locker system
This document proposes a fingerprint-based bank locker system using biometric authentication. Fingerprint scanning would be used to identify authorized users, with fingerprints stored on an FIM 3030N fingerprint module interfaced to an 8051 microcontroller. When a user's fingerprint is scanned and matches a stored profile, they would then enter a unique ID via keypad to open their assigned locker. If an unauthorized fingerprint is scanned, a buzzer would sound as an alert. The system aims to provide more secure access to bank lockers than conventional key-based locks.
Home automation using android phones-Project 2nd phase ppt
This presentation will be useful for the Information science and Computer science students. It contains Use case diagrams, Activity diagrams and data flow diagrams along with details of other sensors.
IoT Home Automation System
The project titled ’IoT Home Automation System’ is designed and implemented using Arduino, PHP and MySQL. The project aims provide user with an automated means to control the devices in their homes using a web application from anywhere on the planet.
Finger print based bank locker system
This document describes a fingerprint-based bank locker system that uses biometrics for authentication. Fingerprint scanning is used to register and verify authorized users' fingerprints stored with unique IDs. When a fingerprint is scanned, it is verified against stored images and the user must also enter their unique ID. If authorized, the assigned locker will open, and a switch allows closing it. An interfaced buzzer will alert if an unauthorized person attempts access. The system includes a fingerprint scanner module connected to a microcontroller to control the scanning and authentication process.
Fingerprint based security system
This document provides a project definition for a fingerprint-based security system. The system will use an AT89C51 microcontroller to analyze fingerprint scans and activate a motor if an authorized fingerprint is detected. Fingerprint data will be stored on the microcontroller even without power. The system block diagram outlines the fingerprint sensor, oscillatory circuit, microcontroller, relay, motor driver and motor components. Software will include a device driver for fingerprint detection and motor control. Serial communication and LCD interfacing is also specified.
Bm 06 FINGER PRINT BASED SECURITY SYSTEM
aurdunio pprojects, microcontroller projects, microcontrollerprojects, aurdunio,ECE Projects, iot projects, Eletronics engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, live projects ameerpet, live projects near me, live projects institutes Hyderabad, electrical projects hyderabad, academic projects, student projects, final year student projects, btech projects,btech final year projects,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
internet of things
The document discusses the Internet of Things (IoT). It defines IoT as the network of devices that contain electronics, software and connectivity which allows them to connect and exchange data. The key components of IoT include devices/sensors that collect data, gateways that transmit data between networks, the cloud for data storage and processing, analytics to analyze data, and user interfaces for human access. Common IoT applications are then discussed, including using the NodeMCU and ESP8266 microcontroller board to build basic IoT projects like controlling an LED, reading temperature and humidity with a DHT11 sensor, and using a relay module.
Fingerprint base security system
This document describes a fingerprint-based security system that uses a microcontroller and fingerprint module to open a lock only for authorized users. The system scans a fingerprint and verifies it matches one stored on the microcontroller. If so, it activates a relay that opens the locked system. The fingerprint module can store up to 750 fingerprints and is connected to the microcontroller via a serial port. The system provides security for items like medications, jewelry, and documents without needing passwords.
Implement via Smart Home blynk
Nowadays Internet of Things (IoT) is part of the internet that all objects around us. IoT has a very wide and includes variety of objects like electronics product appliances and sensors [4] This research paper aims to design a smart home system by utilizing
Home Automation Over Internet Project (Ev Otomasyon Projesi)
System demonstration of a home automation project made by using Arduino by University Of Gaziantep students. (Arduino ile yapılmış ev otomasyonu projesi. Gaziantep Üniversitesi öğrencileri). Project Website: http://www.flowinweb.com
Android based security and home
The smart mobile terminal operator platform Android is getting popular all over the world with its wide variety of applications and enormous use in numerous spheres of our daily life. Considering the fact of increasing demand of home security and automation, an Android based control system is presented in this paper where the proposed system can maintain the security of home main entrance and also the car door lock. Another important feature of the designed system is that it can control the overall appliances in a room. The mobile to security system or home automation system interface is established through Bluetooth. The hardware part is designed with the PIC microcontroller.
Internet of Things (IoT) Based Smart Security & Home Automation System.
M A Sayed
Department of Electrical & Electronic Engineering
North Bengal International University, Rajshahi-6100
Helpline: 01744-563778
What's hot (15)
IRJET - IoT based Home Automation System through Voice Control using Google A...
IRJET - IoT based Home Automation System through Voice Control using Google A...
Home automation using android phones-Project 2nd phase ppt
Home automation using android phones-Project 2nd phase ppt
Home Automation Over Internet Project (Ev Otomasyon Projesi)
Home Automation Over Internet Project (Ev Otomasyon Projesi)
Internet of Things (IoT) Based Smart Security & Home Automation System.
Internet of Things (IoT) Based Smart Security & Home Automation System.
Viewers also liked
Power electronics embedded power system titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, mobile assisted living systems, water quality monitoring using GSM, speed and torque monitoring of induction motors, oxygen level monitoring, defect detection of printed circuit boards, hardware-based job queue management for many-core architectures, and FFT processors for MIMO-OFDM systems.
Building point of care health technologies on the ieee 11073 health device st...
The document describes a point of care health system built using IEEE 11073 health device standards and ZigBee health care profile guidelines from Continua Alliance. It implements four physiological devices and three environmental sensors to monitor frail elderly and diabetes patients. Experience shows the standards provide advantages like rapid development and a growing range of compatible commercial devices.
Bed side patients monitoring system with emergency alert
This document proposes a bedside patient monitoring system that measures temperature data using a portable medical monitoring unit containing a microcontroller, sensor board, and information processing system. The system takes a patient's temperature using a sensor, converts the analog data to digital using an ADC, and sends it to the microcontroller for processing. If the temperature exceeds a threshold value, the system sounds a buzzer for emergency indication.
Maquinas simples
El documento resume las características de diferentes máquinas simples como palancas, planos inclinados y cuñas. Explica que una máquina simple cumple la ley de conservación de la energía al transformar la energía en lugar de crearla o destruirla. Además, enumera ejemplos cotidianos del uso de máquinas simples como martillos, pinzas y péndulos.
future of family run businesses POV FINAL
The document discusses the unique strengths and challenges of family-run businesses. It outlines several advantages family-run businesses have over publicly owned companies, such as flexibility, long-term thinking, strong corporate culture and better labor relations. However, only 3% of family businesses survive into the fourth generation, as many struggle with succession planning and an inability to innovate and evolve with changing markets. The key challenge for long-term survival is preparing the business for continuous renewal and innovation beyond just running existing operations.
Seminar: Cost-effective Solutions for Complying with the CARE Act
Watch the presentation on demand: https://www.youtube.com/watch?v=7f2IvI3dSX0
Is your hospital ready for the Caregiver Advise, Record, Enable (CARE) Act? An effort spearheaded by AARP, the law requires hospitals to recognize the role of the caregiver and provide them with the necessary resources to deliver care after a patient has been discharged. Now that the law is being passed in a number of states, including New Jersey, what does this mean for hospitals and how can they comply with these new standards without breaking the bank?
Bob Gold, CEO of GoMo Health, and other members of his team led a seminar June 9th, 2015 focused on how technology can be used to cost-effectively comply with the CARE Act, increase HCAHPS scores, and motivate healthier behaviors among patient populations.
During this seminar attendees learned:
-How the CARE Act is affecting hospitals
-Effective methods for engaging patients and caregivers outside the hospital
-Strategic communications and mobile engagement tactics
-How to integrate human and digital interactions into one conversation
Learn more at http://gomohealth.com
Parte 1 del silabo
Este documento presenta la información sobre el silabo de la asignatura de Sociología Jurídica de la Facultad de Jurisprudencia de la Universidad Regional Autónoma de los Andes para el período 2015. Incluye los datos del curso como código, créditos, horas, docente responsable y pre-requisitos. Explica que el objetivo general es relacionar las estructuras sociales con el derecho y que los métodos de enseñanza incluyen clases magistrales, seminarios, prácticas de laboratorio, casos clínicos y trabajos
Unit 1. day 14
This document discusses angle relationships when parallel lines are cut by a transversal. It defines key terms like alternate interior angles, corresponding angles, and vertical angles. It explains that alternate interior angles, corresponding angles, and vertical angles are congruent, while same-side interior and same-side exterior angles are supplementary. The document provides examples of solving for missing angle measures using these properties and asks students to identify angle relationships in diagrams.
Euregionaal protest tegen Tihange
Een ongekend breed gedragen alliantie van zo'n 20 gemeenten uit de Euregio (Duitsland, Belgie en Nederland) stapt naar de rechter om sluiting van kerncentrale Tihange te eisen.
Documento uno
El documento resume brevemente la historia de la tecnología desde la Edad de Piedra hasta las civilizaciones antiguas como los Incas. Describe los principales desarrollos tecnológicos de cada período, incluyendo las herramientas de piedra, el fuego y la música en la Edad de Piedra; la fundición del cobre y bronce en la Edad de Cobre y Bronce; el trabajo del hierro en la Edad de Hierro; y las invenciones de Egipto, Grecia, Roma, India, China e Incas
Automatic station name display in train
The document describes an "Automatic station name display in train" project that aims to increase passenger convenience by automatically displaying the name of the upcoming station. The project has two modules: a transmitter that wirelessly sends binary area information data, and a receiver with an RF receiver, microcontroller, and LCD display. The receiver compares the received binary data to stored area and name data, and displays the corresponding station name on the LCD if there is a match.
Hrm 558 help education expert . hrm558help.com
This document outlines the assignments, discussions, and exams for an HRM 558 course. It includes assignments on research applications in HR, evaluating criteria for HR tools, interviewing techniques, motivating employees, market analysis, using statistical analyses like t-tests and ANOVA in HR, and evaluating an organization's training, retention, and forecasting programs. The course involves individual written assignments, learning team discussions and activities, and a final exam assessing knowledge of research methodologies in human resources.
Automatic lubrication
This document describes a project to automatically circulate coolant in a lathe cutting tool based on temperature readings from a sensor. When the temperature increases past a threshold, a pump will start supplying coolant to the lathe from a tank. The circulation system is monitored by a control system, and the pump will shut off when the temperature decreases. The goal is to maintain a constant temperature in the tool, avoid coolant wastage, and allow automatic pump operation. Potential disadvantages include difficulty maintaining a closed-loop system.
Can crusher
Ecway Technologies provides engineering projects and software development services across multiple offices in India. They fabricate a mechanical can crusher that efficiently crushes cans at high speed for reuse in plastic industries. The can crusher has a motor, crankshaft, connecting rod, slider block, and plunger block that work together to automatically crush cans when the motor is switched on and the crankshaft rotates. The can crusher reduces worker burden, is easy to operate, and allows adjustable stock length, but is only suitable for mass crushing and runs at a constant speed.
Viewers also liked (15)
Building point of care health technologies on the ieee 11073 health device st...
Building point of care health technologies on the ieee 11073 health device st...
Bed side patients monitoring system with emergency alert
Bed side patients monitoring system with emergency alert
Seminar: Cost-effective Solutions for Complying with the CARE Act
Seminar: Cost-effective Solutions for Complying with the CARE Act
More from Ecway2004
Covering points of interest with mobile sensors
Ecway Technologies provides IEEE projects and software developments from its offices located in multiple cities across Tamil Nadu, India. The company's website and contact information is provided.
The document discusses an algorithm for optimizing the autonomous deployment of mobile sensors to cover predefined Points of Interest while maintaining connectivity between the sensors and a base station. Each sensor moves toward a Point of Interest but also maintains connectivity with a subset of neighboring sensors that are part of a Relative Neighborhood Graph, which is reduced to provide global connectivity locally. The deployment scheme aims to minimize connectivity sensors and maximize monitoring sensors. Analytical results, simulations, and a practical implementation demonstrate the efficiency of the algorithm.
Coloring based inter-wban scheduling for mobile wireless body area networks
This document describes a study on inter-WBAN scheduling for mobile wireless body area networks. The study proposes a random incomplete coloring algorithm with low time complexity and high spatial reuse to overcome interference between wireless body area networks. Simulation results show that the proposed coloring algorithm effectively overcomes inter-WBAN interference and supports higher system throughput in various mobile WBAN scenarios compared to conventional coloring methods.
Code modulation based encryption & decryption technique for secure communicat...
This document describes a code modulation based encryption and decryption technique for secure wireless communication. The system has a transmitter section and receiver section, each designed around a microcontroller. At the transmitter, data typed into a PC is encrypted using the microcontroller and transmitted via RF. At the receiver, the encrypted data is received, decoded by the microcontroller, and displayed on the PC. To view the actual data, a password must be entered which decrypts the cipher text into plaintext. The block diagram shows the transmitter components include an encoder, microcontroller, MAX232, and RF transmitter. The receiver components include a decoder, microcontroller, MAX232, and RF receiver.
Clustering sentence level text using a novel fuzzy relational clustering algo...
Ecway Technologies is a software development company with offices in multiple cities in Tamil Nadu, India. They can be contacted via phone or email.
The paper presents a novel fuzzy clustering algorithm that operates on relational input data in the form of a pairwise similarity matrix between objects. The algorithm uses a graph representation and models centrality as likelihood in an Expectation-Maximization framework. Results show the algorithm can identify overlapping clusters of semantically related sentences, demonstrating potential use in text mining tasks. It was also applied successfully to benchmark datasets in other domains.
Clustering large probabilistic graphs
This document summarizes a study on clustering probabilistic graphs. It proposes extending the edit-distance-based definition of graph clustering to probabilistic graphs. Practical approximation algorithms are developed based on establishing a connection between the objective function and correlation clustering. The parameter-free objective function means the number of clusters is part of the output. Methods are developed for testing statistical significance of clusters and handling noisy clusterings. Experiments on real protein-protein interaction and large-scale social networks demonstrate the techniques can discover correct numbers of clusters and identify known relationships.
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
This paper presents a smart driving direction system that leverages taxi drivers' intelligence and experience. GPS-equipped taxis act as mobile sensors to model the dynamic traffic patterns of a city. A time-dependent landmark graph models traffic patterns and experienced drivers' route choices to provide users with the practically fastest route to a destination at a given departure time. A clustering approach estimates travel times between landmarks in different time slots. A two-stage routing algorithm then computes a customized, practically fastest route for the user based on this graph and real-world trajectory data from over 33,000 taxis over three months. Evaluation found that 60-70% of routes suggested were faster than alternatives, with 20% sharing results, and on average routes
Cloudsim ranking on data manifold with sink points
ECWAY Technologies provides IEEE projects and software development services from its offices in multiple cities across India. The document discusses a novel ranking approach called Manifold Ranking with Sink Points (MRSP) that addresses diversity, relevance, and importance in ranking. MRSP uses manifold ranking over a data manifold to find the most relevant objects while turning already ranked objects into "sink points" to prevent redundant objects from receiving a high rank. Experimental results on update summarization and query recommendation tasks show MRSP performs strongly compared to existing ranking approaches by better addressing the importance of diversity in ranking.
Cloudsim quality-differentiated video multicast in multirate wireless networks
This document describes a quality-differentiated video multicast scheme for multirate wireless networks called QDM. QDM aims to provide heterogeneous clients with differentiated video qualities matching their channel conditions. It first proposes a rate scheduling model to select the optimal transmission bitrate for each video frame to maximize total visual quality subject to minimum quality guarantees. It then presents QDM, a practical protocol that constructs a cluster-based structure to characterize heterogeneity and adapts transmission rates based on video quality perceived by cluster heads. Simulation results show QDM can efficiently adapt to network dynamics and variable bitrates, producing a 2-5 dB gain in average video quality over leader-based approaches.
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
The document proposes a power allocation scheme for statistical quality-of-service provisioning in multi-relay cognitive networks. The scheme first chooses between direct transmission or relay transmission based on channel state information. It then performs efficient power allocation according to the transmission mode and given constraints like quality-of-service requirements, average transmit power limits, and peak interference limits. Simulations show the proposed scheme outperforms max-min criterion and equal power allocation policies by achieving higher throughput while involving at most two relays for transmission.
Cloudsim distributed web systems performance forecasting using turning bands...
The document discusses using the Turning Bands method to forecast the performance of distributed web systems. Real-life data was obtained from an experiment monitoring a group of web servers worldwide using an agent system called MWING located in different parts of Poland. The results showed good quality in predicting web performance when European web servers were monitored from an agent in Gliwice, Poland using the Turning Bands method.
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
This document summarizes a paper on distributed processing of probabilistic top-k queries in wireless sensor networks. It introduces the concepts of sufficient and necessary sets, which can facilitate localized data pruning in clusters. It then describes three algorithms - sufficient set-based, necessary set-based, and boundary-based - for intercluster query processing with bounded communication rounds. Finally, it presents an adaptive algorithm that dynamically switches between the three algorithms to minimize transmission cost, and experimental results showing the algorithms significantly reduce data transmission with small constant communication rounds, with the adaptive algorithm performing near-optimally under various conditions.
Civil 2013 titles
This document contains 15 titles for civil engineering projects related to structural analysis. The titles cover topics like analyzing beams, trusses, bridges, dams, and other structures under different loads and conditions using methods like finite element analysis. The analyses will determine factors like deflection, stresses, stability, and performance of the various civil structures.
Chopper based dc motor speed control
This document discusses using a chopper circuit to control the speed of a DC motor. A chopper circuit allows controlling the voltage to the motor by rapidly switching the voltage on and off, which enables remote speed control. This method improves motor efficiency by reducing current, lowers temperatures, shrinks motor size, and increases lifetime compared to previous variable resistor and transformer-based speed control methods. The project will use buttons to vary the firing angle of a MOSFET in the chopper circuit to control motor speed, with lower firing angles providing higher speeds.
Channel assignment for throughput optimization in multichannel multiradio wir...
ECWAY Technologies provides IEEE projects and software developments with offices in multiple cities in Tamil Nadu, India. They can be contacted via phone or email.
The document discusses a channel assignment algorithm for throughput optimization in multi-radio wireless mesh networks using network coding. It formulates the joint problem of random network coding, channel assignment, and broadcast link scheduling while taking into account opportunistic overhearing, interference constraints, coding constraints, number of channels, radios per node, and fairness between unicast connections. An auction-based suboptimal solution is developed for overall network throughput optimization. Performance evaluation shows the algorithm can effectively use multiple radios and channels while addressing fairness issues from the auction, with promising gains over traditional routing
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
The document proposes a hybrid channel allocation and routing approach for multichannel multiradio wireless mesh networks. It presents an Adaptive Dynamic Channel Allocation (ADCA) protocol that considers both throughput and delay for channel assignment. It also proposes an Interference and Congestion Aware Routing (ICAR) protocol for hybrid networks with static and dynamic links that balances channel usage. Simulation results show ADCA reduces packet delay without degrading throughput, and the hybrid approach adapts better to changing traffic than static-only networks with lower overhead and delay than existing hybrid methods.
Casual stereoscopic photo authoring
Ecway Technologies provides software development and IEEE projects services from offices located in multiple cities across India. They can be contacted via phone or email on their website at www.ecwayprojects.com.
The paper presents a method for easy stereoscopic photo authoring using a regular monocular camera. It takes two input images or video frames and transforms them into a stereoscopic image pair for pleasant 3D viewing. This is done through a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. The warping uses spatially-varying mesh-based warps that encode various constraints to best meet the stereoscopic geometry and minimize distortion. Experiments show the
Casual stereoscopic photo authoring
Ecway Technologies provides IEEE projects, software developments, and casual stereoscopic photo authoring. It has offices in multiple cities across India. Ecway's casual stereoscopic photo authoring method takes two images or video frames from a regular monocular camera as input and transforms them into a stereoscopic image pair for 3D viewing. The method uses a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. It formulates the warping problem as a quadratic energy minimization solved using a sparse linear solver. The method also allows local and global disparity adjustments for adapting stereoscopic images to different viewing conditions. Experiments show Ecway's spatially-varying war
Capacity of hybrid wireless mesh networks with random a ps
This paper proposes a hybrid wireless mesh network (WMN) architecture that allows the backbone to utilize random connections to access points (APs) in a wireless local area network (WLAN). Theoretical analysis shows that the capacity of a three-tier hybrid WMN is affected by the number of mesh router cells connected to APs, the ratio of access link bandwidth to backbone link bandwidth, and traffic balance among routers with AP access. Simulation results demonstrate that configuring APs and balancing traffic can significantly improve network capacity in the proposed hybrid architecture by taking advantage of wired connections through APs.
Bomb detection robot with wireless camera
This prototype robot is designed to help bomb squads by remotely detecting bombs and obstacles. It uses sensors to detect metals and obstacles as it moves through an area, sending that information back to operators via a wireless camera and computer. The robot is navigated and directed remotely using the camera while its metal detection, obstacle detection, and location data are sent to a base station for operators to monitor on LED displays and sounds.
Bed side patients monitoring system with emergency alert
The document describes a bedside patient monitoring system that measures temperature data using a portable medical monitoring unit. The unit contains a microcontroller, sensor board, and processing system to manage information, analyze data in real-time, and provide warnings for emergencies or abnormal diagnoses. The system takes a patient's temperature, converts it to digital using an ADC, and sends it to the microcontroller for processing. If the temperature exceeds a threshold, the system sounds a buzzer for notification.
More from Ecway2004 (20)
Coloring based inter-wban scheduling for mobile wireless body area networks
Coloring based inter-wban scheduling for mobile wireless body area networks
Code modulation based encryption & decryption technique for secure communicat...
Code modulation based encryption & decryption technique for secure communicat...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim ranking on data manifold with sink points
Cloudsim ranking on data manifold with sink points
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Capacity of hybrid wireless mesh networks with random a ps
Capacity of hybrid wireless mesh networks with random a ps
Bed side patients monitoring system with emergency alert
Bed side patients monitoring system with emergency alert
Automobile security system using digital password
- 1. AUTOMOBILE SECURITY SYSTEM USING DIGITAL PASSWORD ABSTRACT An electronic lock or digital lock is a device which has an electronic control assembly attached to it. They are provided with an access control system. This system allows the user to unlock the device with a password. The password is entered by making use of a keypad. The user can also set his password to ensure better protection. The major components include a keypad, LCD and the microcontroller. This article describes the making of an electronic code lock using the 8051 microcontroller. BLOCK DIAGRAM KEYPAD MICROCONTROLLER LCD DISPLAY