Buy Abortion pills in Riyadh |+966572737505 | Get Cytotec
Automatic SMT Tape Cutting Machine R-TC950.pdf
1. Automatic SMT
Tape Cutting Machine
Model: R-TC950
Technical Specification
1. Equipment specifications and parameters
Model : R-TC950
Dimensions: L950×W290×H450mm
Cutting method: circular knife walking cutting
Transmission mode: gear assembly
Drive mode: motor + synchronous belt
Cutting range: L770*W60mm
Cutting range: L745*W25mm
Equipment weight: 40KG
Cutting speed: 10m/min
Power source: AC220V, 50~60HZ
Material box induction: photoelectric induction
Machine dimension :
2. Equipment features:
1) Microcomputer intelligent control, cutting time and length can be set. One-button start/
stop, easy to operate.
AUTOMATIC SMT TAPE CUTTING MACHINE MODEL : R-TC950
2. 2) Limit switches are installed at both ends of the shearing stroke of the
equipment, and the whole machine will be powered off if the stroke is exceeded.
3) A safety sensor is installed at the waste recycling place. When the material box is
removed, the equipment will automatically stop working to prevent employees from
extending their hands from the bottom of the equipment into the working area of the
equipment and knives to ensure safety. At the same time, ensure that all the cut materials
fall into the recycling box.
4) This machine has a one-year warranty and permanent after-sales service
5). This tape cutting machine is suitable for all kinds of SMT tapes. It can easily cut from
0.05mm to 1.5mm thick tape.
6). Patent (Patent No. ZL201520023125.6) The equipment is elegant in appearance,
occupies a small area, and is convenient to use and store. specific
The size can be customized according to the recycling area of the customer's various
placement machines.
7). Blade: The material is imported DC-53, and it is guaranteed to be used for one year
without sharpening.
8). Patent (Patent No. ZL201530007763.4) tooth knife rolling cutting mechanism, when
cutting, it relies on eight springs at the bottom of the tooth knife
The tension makes the cutting edge plane of the gear knife and the straight knife point
contact tangent, which solves the problem of fast wear of the upper and lower straight
knife blades on the market.
Disadvantages, all our belt cutters are guaranteed for two years (including the blade), the
four sides of the straight knife can be turned over for use, and the toothed knife can be
ground repeatedly. same
At the same time, it completely solves the phenomenon that the traditional tape cutting
machine uses a small blade to cut back and forth and encounters the frequent jamming of
the material tape. As shown below:
AUTOMATIC SMT TAPE CUTTING MACHINE MODEL : R-TC950
Transmission gear set
Walking round knife
Spring