This document provides instructions for servicing a lock cylinder heating system. It cautions the user to disconnect the battery ground strap before working on the electrical system. It also notes that the anti-theft radio coding should be determined before disconnecting the battery. After reconnecting the battery, the user should check and activate the vehicle's electrical equipment as outlined in the repair manual or owner's manual.

1. 96-16
Lock cylinder heating,
servicing
CAUTION!
Disconnect the battery Ground (GND) strap
before working on the electrical system.
Notes:
Before disconnecting the battery, determine
correct coding for the anti-theft radio.
After reconnecting the battery, check and
activate the vehicle's electrical equipment
(radio, clock, comfort and convenience
features, etc.) as outlined in this Repair Manual
or the Owner's Manual.
Page 1 of 2Lock cylinder heating, servicing
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.4

2. 96-17
Heated door lock control module,
removing and installing
Removing
- Remove door trim.
Repair Manual, Body Interior, Repair Group
70
Installing
- Remove screws -2- from plastic nuts -3-.
- Disconnect harness connector and remove control module -1-.
- Install in reverse order of removal.
Page 2 of 2Lock cylinder heating, servicing
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.4