Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
AUDI A4 B5 1.8L 1996 BADY 55 12 rear lid vin 8 d xa 200 000
1. 55-12
Rear lid ( m.y. 1999 VIN 8D XA
200 000)
Rear lid and rear lid lock, removing,
installing and adjusting
1 - Stop buffer (2x)
Adjusting:
- Loosen bolt -11- and detach stop buffer.
- Tighten bolt -11- finger-tight (it must still
be possible to move stop buffer).
- Carefully close rear lid until lid is flush
with rear side panels.
- Carefully open rear lid -3-.
- Pull stop buffer -1- out two catches (1
mm preload) and tighten bolt -2- to 6 Nm
0.5 Nm (53 in. lb 4 in. lb).
Page 1 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
2. 55-13
2 - Rear lid
Removing:
- Remove warning triangle and holder
page 55-21 .
- Remove rear lid lining.
- Disconnect and unclip electrical wiring
harness connectors.
- Unclip vacuum line for central locking
system.
Second person is needed to remove lid
- Remove nuts for rear lid hinges page
55-16 .
Installing:
- Install in reverse order of removal.
Adjusting:
- Use rear lid hinges to center and adjust
height of rear lid page 55-17 .
- Adjust stop buffers -1-.
- Adjust striker plate -5-.
- Center lid according to panel gap
dimensions page 55-20 .
3 - Rear lid lock
- Unclip operating rod -9-.
Page 2 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
3. - Unscrew nuts -8-.
Page 3 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
4. 55-14
4 - Locking cylinder
- Remove warning triangle and holder
page 55-21 .
- Remove rear lid lining.
- Disconnect vacuum line for central
locking system.
- Disconnect harness connectors.
- Unclip operating rod -9-.
- Remove bolts -7-.
5 - Striker plate
- Unscrew nuts -6-.
Adjusting:
- Tighten nuts -6- finger-tight (it must still
be possible to move striker plate).
- Carefully close rear lid until lid is flush
with rear side panels.
- Carefully open lid and tighten nuts -6-.
6 - Hex nut
8 Nm (71 in. lb)
7 - Hex nut
8 Nm (71 in. lb)
8 - Hex nut
Page 4 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
5. 6 Nm (53 in. lb)
9 - Operating rod
Page 5 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
6. 55-15
10 - Retaining clip
11 - Hex bolt
6 Nm (53 in. lb)
Page 6 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
7. 55-16
Rear lid hinge, removing and installing
Rear lid hinge cover
Removing and installing rear lid hinge
- Insert wiring and tubing for central locking system -4- into lower recess
of cable guide at cover -1-.
- From below, attach cover -3- for rear lid hinge between gas-filled strut -
5- and hinge lever, and clip onto hinge lever -2- at top so it engages
audibly.
- Loosen nuts -1- at top on left and right.
Tightening torque: 21 Nm (15 ft lb)
- Remove nuts -2- at bottom on left and right.
Tightening torque: 21 Nm (15 ft lb)
- Prop up or secure lid in open position.
Page 7 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
8. 55-17
- Remove bolts -5- (2x).
Tightening torque: 21 Nm (15 ft lb)
Note:
For easier adjustment of the rear lid hinge, use graduations -3- and -8-
marked on the hinge and the rear lid.
Removing and installing gas-filled strut
- Lift lid slightly and remove hinge -4-.
Note:
When removing or installing the gas-filled strut, push back the opened
rear lid slightly beyond its normal position, being careful not to damage
components.
Installing
- Using screwdriver, push back retaining springs -7- slightly at both ends
of gas-filled strut and clip or unclip gas-filled strut as desired.
- Clip in gas-filled strut at bottom first, then at top.
- Install with tube end of strut at rear lid.
Page 8 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
9. 55-18
Releasing gas from strut
WARNING!
Clamp only in the area shown; otherwise there is a risk of an
accident!
Note:
Always wear eye protection when performing this procedure. Cover the
sawing area with a clean rag to contain any escaping fluid.
- Clamp gas-filled strut in vice area -x-.
Dimension -x- = 50 mm (2 in.)
- Using saw, cut into cylindrical part of strut at point within first third of
cylinder's length (measured from piston rod end of cylinder).
Page 9 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
10. 55-19
Rear lid seal, installing
The butt joint -A- of the rear lid seal must be aligned with the ball socket of
left hinge.
Page 10 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
11. 55-20
Removing and installing handle mechanism
for rear lid
Panel gap dimensions
- Remove bolts -1- (2x).
Tightening torque: 2.5 Nm (22 in. lb)
- Attachment point -A-; remove nuts (2x) for lock cylinder on inside of lid.
Tightening torque: 6 Nm (53 in. lb)
- Pull handle mechanism -3- out enough that harness connectors for
both license plate lights can be disconnected.
- Remove handle mechanism.
- Install nuts -2- (2x) using special tool VAG1618A.
-a- 3.0 mm
Page 11 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
12. 55-21
Removing and installing holder for warning
triangle
- Remove warning triangle.
- Remove bolts -2- (2x).
Tightening torque: 2 Nm
1 - Holder
3 - Expanding clips (2x)
Page 12 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
13. 55-22
Rear lid lock actuator, removing and
installing
Removing
- Remove lock cylinder page 55-14 .
- Push out retaining pins -3- (2x).
- Push tab -4- back and disconnect.
- Remove rear lid lock actuator -1-.
Installing
- Set lock cylinders in "open" position.
- Slide ridged plate -1- to left.
First ridge on plate -1- must snap into first groove on grooved segment
-2-.
Page 13 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2
14. 55-23
Rear lid microswitch, removing
- Remove lock cylinder page 55-14 .
Notes:
- Disengage microswitch -1- in direction of arrow and carefully push out
using screwdriver.
The lock cylinder cannot be adjusted for compatibility with other locks
using standard tools.
In order to maintain single key capability, the lock cylinder must be
ordered according to the lock number.
Page 14 of 14Rear lid ([micro] m.y. 1999 VIN 8D XA 200 000)
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.BD01.55.2