The document summarizes an AS1 Tankmodule manufactured by AquaQlean. The tankmodule consists of a 400L plastic water tank mounted on a stainless steel structure that can be safely installed on a van or trailer floor. It has the capacity to expand to 600L with additional 100L tanks. The filtration unit filters and monitors water quality to ensure pure water. The machine uses a membrane pump powered by an integrated 12V/70Ah battery to operate the pump, controls, and an optional rotating brush via remote control. Key specifications of the tankmodule are provided.

1. AS1
Tankmodule

2. AquaQlean® AS1 Tankmodule
Tank module manufactured of a plastic 400L water tank with on top of this a system structure
made of 2 millimeters stainless steel. The module can simple and safe be mounted on the cargo
floor (minimum 2 cm thick and waterproof) of a van or trailer. The water tank is expandable at
two positions with a 100L water tank, so the total tank capacity increases to 600L.
The tank module is standardly equipped with a safe and functional storage system for poles.
The filtration unit (standard with vent) is perpendicularly placed upon the cargo floor. By this means, a
maximum filtration capacity is realized. The water quality is electronically monitored, thus ensuring that pure
(mineralfree) water is used. When the filter is saturated, the machine automatically turns off after a warning.
The machine is equipped with a membrane pump, which provides a sucking and pressing effect. The
integrated 12V/70 Ah battery takes care of the functioning of the pump, the operating system, the water
quality control and, if used, the rotating brush. (The machine is standardly equipped with an electrical fitting
4 functions by remote control for a direct connection facility of a rotating brush. The operating is carried out by a remote controller (on/off
and forward/backward movement of the brush).
The reel has been designed to make the unrolling and uprolling at connected fittings simple. All important
hose connections are easy to detach by quick- or push-in couplings.
The machine can optionally be equipped with a technical preparation to be directly able to connect the
INDOOR cleaning system.
The machine is standardly equipped with a chemical suction injector, so that during the cleaning process a
pre-cleaning can be run smoothly.
Pole storage system
SPECIFICATIONS
• 400 L watertank • Manual switch over rinsing water in demineralised
• 8 aluminium z-connectors for floor mounting or tap water
• Remote and manual operation • Permanent rinsing water quality control using
• Maintenance free battery 70 Ah with LED level conductivity meter with alarm
indicator • Autolock outflow rinsing water if mix bed resin
• Plastic reel with 50 meter PU 8x6 DUO hose filter is saturated
Z-connectors for floor mounting • Fully automatic 12 V charger • Continuous filter tank air release
• Suction injector for cleaning agent • Pole storage system
• Mix bed resin filter (25 L.)
OPTION • Fully automatic switch over rinsing water
to cleaning agent
TECHNICAL SPECIFICATIONS
Installation kit for charging vehicle Voltage V 12
(with 5 mtr. cable) Maximum temperature (incoming water) ˚C 50
Minimum temperature (incoming water) ˚C 5
Pump pressure bar 5
Total length cm 141
Total width cm 69
Total width incl. DI 25 mounting (left or right) cm 95
Total height incl. pole storage system cm 115
Total weight kg 148
Bracket for extra reel (hose or cable)
VERSIE 01-2013