antisleepalarm using Arduino and blink sensor.pptx

1. 1
KSHATRIYA COLLEGE OF ENGINEERING
DEPARTMENT OF ELECTRONICS AND
COMMUNICATION ENGINEERING

2. ANTI SLEEP
ALARM
PRESENTED BY:
R Shiva 22379-EC-010
R Anil 22379-EC-001
CH Charanteja 22379-EC-005
CH Pranay 22379-EC-036
J Gnanadeep 22379-EC-020

3. Introduction
╸ In modern-times, owing to hectic schedules it becomes very difficult to remain active all
the time. Imagine a situation where a person is driving home from work, dead tired after
facing all the challenges of the day. His hands are on the wheel and foot on the pedal but
suddenly he starts feeling drowsy, his eyes start shutting and his vision blurs and before
he knows it, he’s asleep. Falling asleep on the wheel can lead to serious consequences,
there may be accidents and people may even lose their lives. This situation is much more
common then we notice and hence, it is very important to counter this problem. So to
address this issue, we have come up with a Driver Anti-sleep Alarm ⏰.
╸ This system Stops the user's car if he/she falls asleep at the wheel thereby, avoiding
accidents and saving lives. This system is useful, especially for people who travel long
distances and people who are driving late at night 🌃.
3

4. COMPONENTS USED:
╸ Eye blink sensor
╸ Eye glass 👓
╸ Relay module
╸ Arduino nano
╸ Buzzer
╸ BO motor
╸ 9V battery 🔋
4

5. CIRCUIT DIAGRAM:
5

6. Arduino nano
6
The Arduino Nano is an open-source
breadboard-friendly microcontroller
board based on the
Microchip ATmega328P microcontroller
(MCU) and developed by Arduino.cc and
initially released in 2008.

7. Blink sensor
7
Eye blink sensors detect eye movements
using infrared light. They have many uses,
including preventing drowsy driving,
controlling devices with your eyes, and
scientific research.

8. Realy module
8
A relay module is a switch that uses a low-
power signal to control a high-power
circuit. It's used in many applications,
including home automation, automotive
electronics, and industrial machinery.

9. Working
╸ Whenever the driver feels sleepy and asleep the eye blink
sensor detects and the buzzer turn ON with a sound of an
intermediate beep and vehicle goes from Running state to off
state. The drowsiness detection system is capable of detecting
drowsiness in quickly.
9

10. Applications
╸ Product Overview: The Anti Sleep Alarm for Drivers is a vital
safety tool designed to prevent drowsy driving accidents. By
utilizing advanced sensors, this device monitors the driver's
condition and detects early signs of fatigue through changes in
head position and eye movement.
10

11. Thank you!
11