Andrew Jolliff Resume 1
•Download as DOCX, PDF•
1 like•138 views
Andrew Jolliff is a certified wind turbine technician seeking employment with a wind company. He has over 10 years of experience operating heavy equipment and ensuring safety regulations are followed. He is trained to operate, maintain, and repair wind turbines using skills in industrial electricity, schematic interpretation, and hand tools. He has a valid driver's license and is willing to travel or relocate for work.
Report
Share
Report
Share
Recommended
Crouzet Aerospace - ID Card
With more than 50 years of presence in the aerospace market, Crouzet Aerospace is a specialist providing customized solutions for electromechanical switches, inductive sensors, electrical protection and cockpit equipment backed up by a loyal and experienced team of experts available worldwide.
http://www.crouzet-aerospace.com
Follow us on LinkedIn: https://www.linkedin.com/company/crouzet-aerospace
Crouzet Aerospace is a brand of InnoVista Sensors™.
InnoVista Sensors™ : your trusted partner of choice to face industrial challenges of today and tomorrow.
InnoVista Sensors™ is a worldwide industrial specialist of sensors, controllers and actuators for automated systems.
Through its brands, Crouzet Aerospace, Crouzet Automation, Crouzet Control, Crouzet Motors, Crouzet Switches and Systron Donner Inertial, InnoVista Sensors™ offers a wide range of reliable, efficient and customizable components dedicated to the Aerospace & Defence, Transportation and Industrial market and segments.
Thanks to the recognized expertise of its teams and a strong innovation policy, InnoVista Sensors™ brings performance enhancing solutions to its customers worldwide.
www.innovistasensors.com
Contact us: http://www.crouzet-aerospace.com/contact-Crouzet-Aerospace/contact-us
Renice R-SATA storage solution for Aerospace and Defense application
Renice will introduce R-SATA SSD solution and will show why Aerospace and Defence application need such solution.
Aero Precision signs agreement with WesTest Engineering!!!
Aero Precision Industries LLC has entered into an agreement with WesTest Engineering Corporation to provide sales support for WesTest's 2000/DATS Automatic Test Equipment. The WesTest ATE can test 5 LRUs and over 400 SRUs from 45 LRUs. This will allow Aero Precision to expand its depot level test, repair, and spares support for aircraft avionics systems. WesTest ATE is already used by six F-16 customers including the USAF. The agreement will help more F-16 operators gain independent repair and overhaul capabilities through Aero Precision's maintenance support using the WesTest test stands.
Loto verify awareness
This document provides information about lockout/tagout procedures. The purpose of lockout/tagout is to prevent energy from accidentally being released while equipment is being serviced in order to protect employee safety and health. It defines key terms like energy sources, isolating devices, equipment specific procedures, lockout/tagout, and verify. It describes the roles of authorized employees who service equipment and affected employees who work near servicing activities. Working together, authorized employees properly plan work, isolate energy sources, and verify isolation, while affected employees avoid work areas and do not interfere with locks or tags.
Aegis motor-repair-handbook edition-2-2013
This document provides information on best practices for protecting motor bearings when operating with variable frequency drives (VFDs), including installing AEGIS® shaft grounding rings. It discusses how VFDs can induce shaft voltages and bearing currents that cause electrical discharge machining (EDM) damage like pitting, frosting and fluting in bearings. The document provides guidance on testing for shaft voltages, selecting the correct shaft grounding product, and specifications for incorporating shaft grounding technology in new motor designs and repairs. It aims to establish industry standards for safely operating motors with VFDs and avoiding costly bearing failures.
Explantation beyond the horizon
1) Explantation is the procedure to remove failed dental implants. It aims to minimize damage to bone and soft tissue to allow for possible future implant therapy.
2) There are several techniques for explantation including using a scalpel and forceps, bur and forceps, trephine drill, high torque wrench, electrosurgery, and laser.
3) Studies have found that the bur-forceps/neo bur-forceps and scalpel-forceps techniques had a 100% success rate, while the neo bur-forceps technique allowed for safe insertion of a new implant. The high torque wrench technique appeared to have the highest predictability for future implant insertion.
Hse alert 48 driver and operator's ppe-non-compliance
For some unknown and inexplicable reason, and despite all the Arabtec rules and regulations on PPE, all ATC projects are continuing to permit drivers and machine operatives on to their sites (“Safety Starts Here – No – PPE – No Work”) who are:
wearing sandals, flip-flops, trainers instead of SAFETY BOOTS.
wearing casual clothes or national costume (generally loose, baggy and light clothing) instead of industrial PROTECTIVE CLOTHING.
wearing dark jumpers or other top clothing instead of HIGH VISIBILITY VESTS
not wearing eye protection (in open vehicles) initial of SAFETY GOGGLES
no nose and mouth protection (in open vehicles) initial of FACE MASKS
wearing caps, cloths or nothing on their heads instead of SAFETY HELMETS
not wearing (unbuckled) SEAT BELTS (which is a key PPE item for drivers)
There are NO EXCEPTIONS in the Arabtec or legal safety requirements in the wearing of PPE.
The other serious issue which concerns our Management, Construction, Plant and HSE teams, is that we Do Walk By, do not check, and do not stop and the practice, which legally is condoning the practice which do not discipline (= termination) which puts your project and Arabtec in legal jeopardy.
ACT IMMEDIATELY AND DAILY TO ERADICATE THIS LEGACY AND HABITUAL CULTURE BY DRIVERS, AND OUR FAILURE TO CONTROL.
Arvtech Aero Inc. Services
Arvtech Aero Inc. is an association of engineers with over 100 cumulative years of experience in aerospace and power generation product development. They have been in business for 10 years and work with aerospace and power companies, specializing in turboprops, turbo shafts, turbo fans, and industrial turbines. Their services include mechanical design, analysis, manufacturing, and overall project management.
Recommended
Crouzet Aerospace - ID Card
With more than 50 years of presence in the aerospace market, Crouzet Aerospace is a specialist providing customized solutions for electromechanical switches, inductive sensors, electrical protection and cockpit equipment backed up by a loyal and experienced team of experts available worldwide.
http://www.crouzet-aerospace.com
Follow us on LinkedIn: https://www.linkedin.com/company/crouzet-aerospace
Crouzet Aerospace is a brand of InnoVista Sensors™.
InnoVista Sensors™ : your trusted partner of choice to face industrial challenges of today and tomorrow.
InnoVista Sensors™ is a worldwide industrial specialist of sensors, controllers and actuators for automated systems.
Through its brands, Crouzet Aerospace, Crouzet Automation, Crouzet Control, Crouzet Motors, Crouzet Switches and Systron Donner Inertial, InnoVista Sensors™ offers a wide range of reliable, efficient and customizable components dedicated to the Aerospace & Defence, Transportation and Industrial market and segments.
Thanks to the recognized expertise of its teams and a strong innovation policy, InnoVista Sensors™ brings performance enhancing solutions to its customers worldwide.
www.innovistasensors.com
Contact us: http://www.crouzet-aerospace.com/contact-Crouzet-Aerospace/contact-us
Renice R-SATA storage solution for Aerospace and Defense application
Renice will introduce R-SATA SSD solution and will show why Aerospace and Defence application need such solution.
Aero Precision signs agreement with WesTest Engineering!!!
Aero Precision Industries LLC has entered into an agreement with WesTest Engineering Corporation to provide sales support for WesTest's 2000/DATS Automatic Test Equipment. The WesTest ATE can test 5 LRUs and over 400 SRUs from 45 LRUs. This will allow Aero Precision to expand its depot level test, repair, and spares support for aircraft avionics systems. WesTest ATE is already used by six F-16 customers including the USAF. The agreement will help more F-16 operators gain independent repair and overhaul capabilities through Aero Precision's maintenance support using the WesTest test stands.
Loto verify awareness
This document provides information about lockout/tagout procedures. The purpose of lockout/tagout is to prevent energy from accidentally being released while equipment is being serviced in order to protect employee safety and health. It defines key terms like energy sources, isolating devices, equipment specific procedures, lockout/tagout, and verify. It describes the roles of authorized employees who service equipment and affected employees who work near servicing activities. Working together, authorized employees properly plan work, isolate energy sources, and verify isolation, while affected employees avoid work areas and do not interfere with locks or tags.
Aegis motor-repair-handbook edition-2-2013
This document provides information on best practices for protecting motor bearings when operating with variable frequency drives (VFDs), including installing AEGIS® shaft grounding rings. It discusses how VFDs can induce shaft voltages and bearing currents that cause electrical discharge machining (EDM) damage like pitting, frosting and fluting in bearings. The document provides guidance on testing for shaft voltages, selecting the correct shaft grounding product, and specifications for incorporating shaft grounding technology in new motor designs and repairs. It aims to establish industry standards for safely operating motors with VFDs and avoiding costly bearing failures.
Explantation beyond the horizon
1) Explantation is the procedure to remove failed dental implants. It aims to minimize damage to bone and soft tissue to allow for possible future implant therapy.
2) There are several techniques for explantation including using a scalpel and forceps, bur and forceps, trephine drill, high torque wrench, electrosurgery, and laser.
3) Studies have found that the bur-forceps/neo bur-forceps and scalpel-forceps techniques had a 100% success rate, while the neo bur-forceps technique allowed for safe insertion of a new implant. The high torque wrench technique appeared to have the highest predictability for future implant insertion.
Hse alert 48 driver and operator's ppe-non-compliance
For some unknown and inexplicable reason, and despite all the Arabtec rules and regulations on PPE, all ATC projects are continuing to permit drivers and machine operatives on to their sites (“Safety Starts Here – No – PPE – No Work”) who are:
wearing sandals, flip-flops, trainers instead of SAFETY BOOTS.
wearing casual clothes or national costume (generally loose, baggy and light clothing) instead of industrial PROTECTIVE CLOTHING.
wearing dark jumpers or other top clothing instead of HIGH VISIBILITY VESTS
not wearing eye protection (in open vehicles) initial of SAFETY GOGGLES
no nose and mouth protection (in open vehicles) initial of FACE MASKS
wearing caps, cloths or nothing on their heads instead of SAFETY HELMETS
not wearing (unbuckled) SEAT BELTS (which is a key PPE item for drivers)
There are NO EXCEPTIONS in the Arabtec or legal safety requirements in the wearing of PPE.
The other serious issue which concerns our Management, Construction, Plant and HSE teams, is that we Do Walk By, do not check, and do not stop and the practice, which legally is condoning the practice which do not discipline (= termination) which puts your project and Arabtec in legal jeopardy.
ACT IMMEDIATELY AND DAILY TO ERADICATE THIS LEGACY AND HABITUAL CULTURE BY DRIVERS, AND OUR FAILURE TO CONTROL.
Arvtech Aero Inc. Services
Arvtech Aero Inc. is an association of engineers with over 100 cumulative years of experience in aerospace and power generation product development. They have been in business for 10 years and work with aerospace and power companies, specializing in turboprops, turbo shafts, turbo fans, and industrial turbines. Their services include mechanical design, analysis, manufacturing, and overall project management.
Datasheet CTRL System UL101
Datasheet CTRL System UL101. Ultrasound Detector. Leak Detection. Hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Papers sae org_2004_01_2826
The document discusses high speed machining techniques for aluminum and magnesium helicopter gearcases. Experimental results found that high speed machining could be five times more productive than conventional machining for suitable operations like face milling, endmilling, and planetary milling. Appropriate techniques and performance characteristics are discussed. Potential issues like surface finish and machine tool requirements are also addressed. The paper was presented at an SAE conference on aerospace manufacturing and automated fastening.
Seaward PrimeTest 100 Handheld PAT Tester - Electrical Safety Portable Appliance
Seaward PrimeTest 100 Handheld PAT Tester - Electrical Safety Portable ApplianceThorne & Derrick International
The document provides information about the Primetest 100 portable electrical safety tester. It can perform PAT testing, IEC lead testing, and power socket testing with just the press of a button. It is compact, lightweight, easy to use, and battery powered, making it highly portable. It is suitable for maintenance staff, schools, care homes, and the leisure industry to perform appliance and socket testing with simple operation.159884774 maxforce-ingles
This document provides an overview of the diagnostic/troubleshooting manual for International MaxxForce 11 and 13 diesel engines, including:
- The manual covers safety instructions, engine systems descriptions, diagnostic procedures for various engine symptoms, and diagnostic tools.
- Key engine systems described include air management, fuel management, cooling, lubrication, electronic controls, and the aftertreatment system.
- The electronic control system uses various sensors and actuators to manage engine functions like fuel injection, turbocharging, exhaust gas recirculation, and emissions controls.
Ropes Access safety presentation
presented with Ken Piposar from Abseilon in 2018. A great intro to ropes access for at-height safety. Please contact Ken for more information.
Geo Therm Ltd - Company Profile Booklet
Geo Therm company profile booklet providing a basic overview on the company, its formation, personnel and services sectors to aid existing maintenance regimes, condition monitoring for industry offshore, maritime and energy sector compliance needs.
Rope Access Presentation from Abfad Limited, World Leaders in Rope Access Tec...
Presentation prepared by Glass Frog for Abfad Limited for a presentation to a major international engineering company. The presentation covers the many Rope Access Projects undertaken by the company on a worldwide stage.
Deployable-CT-Scanner
A soldier is injured by an improvised explosive device in Afghanistan and evacuated to a military trauma hospital. Advanced diagnostic imaging, including a CT scan, reveals that his leg can be saved due to technological improvements in CT. In 2008, Marshall Land Systems developed the first deployable CT scanner for military use, allowing CT scans to be conducted during early mobile operations. The system underwent extensive testing and has since been improved, winning contracts to provide NATO with deployable CT scanners. At Marshall, they feel proud that their technology is helping more injured people survive.
SALES / DISTRIBUTION > KANNAD > KANNAD AF-H INTEGRA (ER)
The document describes an automatic fixed emergency locator transmitter (ELT) intended for permanent installation on helicopters. It operates on two frequencies between -40 and +55 degrees Celsius, with a 6-year battery life. Key features include an internal GPS receiver and antenna, short circuit protection, and transmission on 121.5 MHz and 406 MHz frequencies. The ELT weighs 760 grams maximum and has dimensions of 131x86x75.4 mm, to fit in the compact mounting brackets listed. It is intended to be permanently installed and connected to an external antenna.
Portfolio_0215_5
The document provides an overview of Stryker's product catalog and marketing campaigns for 2011. Key highlights include:
1. The catalog carried Stryker's "quality of life" theme throughout and featured more visual content and hyperlinks to drive customers online.
2. Marketing campaigns promoted new products like the Crossfire integrated arthroscopy system and MiniLap instruments through brochures, posters, and tradeshow booths emphasizing resonant benefits.
3. Advertisements and a tradeshow booth introduced Stryker's expanded portfolio for single-site surgeries including longer instruments and a pneumatic scope holder.
Power Strip & Surge Protector Guide in Healthcare Facilities – Tripp Lite
This easy-to-use guide helps you determine what kind of power strips and surge protectors you can use in your healthcare and medical facility from patient-care areas to mobile applications to nurses' stations and more. Tripp Lite healthcare power strips and surge protectors are meet UL requirements for use that meets regulatory code compliance.
Download the white paper "Power Strip Safety & Regulatory Compliance: A Comprehensive Guide to Utilizing Power Strips in Healthcare Facilities" at http://www2.tripplite.com/malp/medical-power-strip-white-paper
Nimonik Expert EHS Series: Rack Safety and Compliance
Nimonik knows that pallet racks, although crucial to the logistics of you operations, are often overlooked at your facilities. A collapsing rack can not only kill staff, it can damage inventory, cause delays and reduce profitability, hence the importance of properly inspecting and maintaining your racks frequently.
In this presentation, Rack Net-Works’ Principle Engineer and Lead Rack Inspector, Tony Mulholland and Brian Rusciolelli, cover a range of elements pertaining to the inspection of racks.
This webinar covers various types of racking, the standards ensuring rack safety, the process of inspection and how to ensure that racks are not overloaded.
Amy Kilzer_Resume
Amy Kilzer is a registered nurse seeking a new nursing opportunity. She has clinical nursing experience and will obtain her bachelor's degree in nursing in May 2016. She is licensed as a registered nurse in Pennsylvania and Texas and maintains certifications in ACLS, BLS, and NIH Stroke Scale. Prior to her nursing career, Amy was the co-owner of a graphics company and owner of a floral shop, where she oversaw operations and customer service. She currently volunteers as a Girl Scout troop leader.
Amit_Purbi_Resume
This document provides a summary of Amit Purbi's work experience and qualifications. He has over 9 years of experience in IT infrastructure management and network support. He currently works as an IT Infrastructure Administrator for TetraPak South East Asia in Singapore, where his responsibilities include remotely managing teams in India, coordinating with vendors, and providing support for various Cisco and other systems. He has a B.Tech. in Instrumentation and holds CCNA, CCNP (Routing & Switching), and BGP+MPLS certifications.
AndyCraigResume
Andy Craig is seeking a career in retail management where he can utilize his creativity and passion. He has over 12 years of experience in grocery, produce, and bakery management roles. Most recently, he was the Grocery/Dairy Manager at Goodness Me! where he led the team in setting up the store and ranked 3rd in departmental sales. Previously, he was the Produce Manager at Joe's No Frills where he increased sales by 10% while maintaining low shrinkage. He has a strong background in operations, merchandising, and training employees.
AndrewRussellResume
Andrew Russell recently completed a Bachelor's degree in Geological Engineering and is seeking full-time employment. He has work experience in mining and tailings departments conducting tasks such as ventilation assessments, mapping, data analysis, and project management. His skills include strong communication, safety advocacy, and adaptability.
Ana Herrera Resume
Ana Herrera has a Bachelor of Science in Chemistry from The University of Texas Pan American with a 3.36 GPA. She has experience teaching chemistry and programming to elementary students and has instructed organic chemistry labs at UTPA. Her skills include using various lab equipment and software for tasks like chromatography, spectroscopy, and NMR. She has conducted research projects analyzing components in foods and determining bacterial presence.
ArielleHallResume(Updated)
Arielle Hall has experience as a United States Army supply specialist and weapons armorer in both South Korea and Iraq from 2009 to 2012. She is currently pursuing a B.F.A. in Illustration from Savannah College of Art and Design, anticipated to graduate in May 2018. Her resume highlights skills in Microsoft Office, Adobe Photoshop, Adobe Illustrator, and typing 40 words per minute. She has also worked as a security officer, displaying conflict resolution and threat detection abilities, and as a sales associate demonstrating leadership and business development expertise.
Andy Loberg Resume
This real estate agent is a self-motivated and conscientious professional with over 25 years of customer service experience. They work diligently to understand their clients' goals and provide honest and transparent service. They help buyers and sellers through the entire real estate transaction process while focusing on both immediate and long-term goals. Their reputation is built on trustworthy communication and active listening skills that make them a trusted advisor.
Ariel Hiller-warehouseresume
This document is a resume for Ariel Hiller. It summarizes her work experience as a Receiving Supervisor at Trimark Economy Restaurant Fixtures, where she supervised a team of 6 workers and conducted quality control. It also mentions her previous experience as a self-employed ice cream truck operator. The resume lists her contact information, qualifications like experience with business management software, and education as an Associate of Arts from City College of San Francisco.
Andrew_Sitek_RESUME_FINAL
Andrew Sitek has over 37 years of experience in geophysics. He has extensive experience processing and quality controlling 2D and 3D seismic data using various software, including ProMAX, Focus, and Geodepth. He has also worked on depth imaging, interpretation, and velocity modeling. Sitek has worked for various oil and gas companies as a geophysicist and senior geophysicist, and has also operated as an independent consultant. He is fluent in Russian and Polish and holds an M.Sc. in Applied Geophysics from the University of Mining and Metallurgy in Krakow, Poland.
Arch Resume DianeLS
Diane Louise Salisbury is a draft design technician seeking new opportunities. She has over 25 years of experience in architectural, structural, electrical, and mechanical drafting and design. Her experience includes drafting construction documents, verifying equipment details, coordinating documentation, and maintaining project files. She is proficient in AutoCAD and has a background in building inspection, sales, and project coordination.
More Related Content
What's hot
Datasheet CTRL System UL101
Datasheet CTRL System UL101. Ultrasound Detector. Leak Detection. Hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Papers sae org_2004_01_2826
The document discusses high speed machining techniques for aluminum and magnesium helicopter gearcases. Experimental results found that high speed machining could be five times more productive than conventional machining for suitable operations like face milling, endmilling, and planetary milling. Appropriate techniques and performance characteristics are discussed. Potential issues like surface finish and machine tool requirements are also addressed. The paper was presented at an SAE conference on aerospace manufacturing and automated fastening.
Seaward PrimeTest 100 Handheld PAT Tester - Electrical Safety Portable Appliance
Seaward PrimeTest 100 Handheld PAT Tester - Electrical Safety Portable ApplianceThorne & Derrick International
The document provides information about the Primetest 100 portable electrical safety tester. It can perform PAT testing, IEC lead testing, and power socket testing with just the press of a button. It is compact, lightweight, easy to use, and battery powered, making it highly portable. It is suitable for maintenance staff, schools, care homes, and the leisure industry to perform appliance and socket testing with simple operation.159884774 maxforce-ingles
This document provides an overview of the diagnostic/troubleshooting manual for International MaxxForce 11 and 13 diesel engines, including:
- The manual covers safety instructions, engine systems descriptions, diagnostic procedures for various engine symptoms, and diagnostic tools.
- Key engine systems described include air management, fuel management, cooling, lubrication, electronic controls, and the aftertreatment system.
- The electronic control system uses various sensors and actuators to manage engine functions like fuel injection, turbocharging, exhaust gas recirculation, and emissions controls.
Ropes Access safety presentation
presented with Ken Piposar from Abseilon in 2018. A great intro to ropes access for at-height safety. Please contact Ken for more information.
Geo Therm Ltd - Company Profile Booklet
Geo Therm company profile booklet providing a basic overview on the company, its formation, personnel and services sectors to aid existing maintenance regimes, condition monitoring for industry offshore, maritime and energy sector compliance needs.
Rope Access Presentation from Abfad Limited, World Leaders in Rope Access Tec...
Presentation prepared by Glass Frog for Abfad Limited for a presentation to a major international engineering company. The presentation covers the many Rope Access Projects undertaken by the company on a worldwide stage.
Deployable-CT-Scanner
A soldier is injured by an improvised explosive device in Afghanistan and evacuated to a military trauma hospital. Advanced diagnostic imaging, including a CT scan, reveals that his leg can be saved due to technological improvements in CT. In 2008, Marshall Land Systems developed the first deployable CT scanner for military use, allowing CT scans to be conducted during early mobile operations. The system underwent extensive testing and has since been improved, winning contracts to provide NATO with deployable CT scanners. At Marshall, they feel proud that their technology is helping more injured people survive.
SALES / DISTRIBUTION > KANNAD > KANNAD AF-H INTEGRA (ER)
The document describes an automatic fixed emergency locator transmitter (ELT) intended for permanent installation on helicopters. It operates on two frequencies between -40 and +55 degrees Celsius, with a 6-year battery life. Key features include an internal GPS receiver and antenna, short circuit protection, and transmission on 121.5 MHz and 406 MHz frequencies. The ELT weighs 760 grams maximum and has dimensions of 131x86x75.4 mm, to fit in the compact mounting brackets listed. It is intended to be permanently installed and connected to an external antenna.
Portfolio_0215_5
The document provides an overview of Stryker's product catalog and marketing campaigns for 2011. Key highlights include:
1. The catalog carried Stryker's "quality of life" theme throughout and featured more visual content and hyperlinks to drive customers online.
2. Marketing campaigns promoted new products like the Crossfire integrated arthroscopy system and MiniLap instruments through brochures, posters, and tradeshow booths emphasizing resonant benefits.
3. Advertisements and a tradeshow booth introduced Stryker's expanded portfolio for single-site surgeries including longer instruments and a pneumatic scope holder.
Power Strip & Surge Protector Guide in Healthcare Facilities – Tripp Lite
This easy-to-use guide helps you determine what kind of power strips and surge protectors you can use in your healthcare and medical facility from patient-care areas to mobile applications to nurses' stations and more. Tripp Lite healthcare power strips and surge protectors are meet UL requirements for use that meets regulatory code compliance.
Download the white paper "Power Strip Safety & Regulatory Compliance: A Comprehensive Guide to Utilizing Power Strips in Healthcare Facilities" at http://www2.tripplite.com/malp/medical-power-strip-white-paper
Nimonik Expert EHS Series: Rack Safety and Compliance
Nimonik knows that pallet racks, although crucial to the logistics of you operations, are often overlooked at your facilities. A collapsing rack can not only kill staff, it can damage inventory, cause delays and reduce profitability, hence the importance of properly inspecting and maintaining your racks frequently.
In this presentation, Rack Net-Works’ Principle Engineer and Lead Rack Inspector, Tony Mulholland and Brian Rusciolelli, cover a range of elements pertaining to the inspection of racks.
This webinar covers various types of racking, the standards ensuring rack safety, the process of inspection and how to ensure that racks are not overloaded.
What's hot (12)
Seaward PrimeTest 100 Handheld PAT Tester - Electrical Safety Portable Appliance
Seaward PrimeTest 100 Handheld PAT Tester - Electrical Safety Portable Appliance
Rope Access Presentation from Abfad Limited, World Leaders in Rope Access Tec...
Rope Access Presentation from Abfad Limited, World Leaders in Rope Access Tec...
SALES / DISTRIBUTION > KANNAD > KANNAD AF-H INTEGRA (ER)
SALES / DISTRIBUTION > KANNAD > KANNAD AF-H INTEGRA (ER)
Power Strip & Surge Protector Guide in Healthcare Facilities – Tripp Lite
Power Strip & Surge Protector Guide in Healthcare Facilities – Tripp Lite
Nimonik Expert EHS Series: Rack Safety and Compliance
Nimonik Expert EHS Series: Rack Safety and Compliance
Viewers also liked
Amy Kilzer_Resume
Amy Kilzer is a registered nurse seeking a new nursing opportunity. She has clinical nursing experience and will obtain her bachelor's degree in nursing in May 2016. She is licensed as a registered nurse in Pennsylvania and Texas and maintains certifications in ACLS, BLS, and NIH Stroke Scale. Prior to her nursing career, Amy was the co-owner of a graphics company and owner of a floral shop, where she oversaw operations and customer service. She currently volunteers as a Girl Scout troop leader.
Amit_Purbi_Resume
This document provides a summary of Amit Purbi's work experience and qualifications. He has over 9 years of experience in IT infrastructure management and network support. He currently works as an IT Infrastructure Administrator for TetraPak South East Asia in Singapore, where his responsibilities include remotely managing teams in India, coordinating with vendors, and providing support for various Cisco and other systems. He has a B.Tech. in Instrumentation and holds CCNA, CCNP (Routing & Switching), and BGP+MPLS certifications.
AndyCraigResume
Andy Craig is seeking a career in retail management where he can utilize his creativity and passion. He has over 12 years of experience in grocery, produce, and bakery management roles. Most recently, he was the Grocery/Dairy Manager at Goodness Me! where he led the team in setting up the store and ranked 3rd in departmental sales. Previously, he was the Produce Manager at Joe's No Frills where he increased sales by 10% while maintaining low shrinkage. He has a strong background in operations, merchandising, and training employees.
AndrewRussellResume
Andrew Russell recently completed a Bachelor's degree in Geological Engineering and is seeking full-time employment. He has work experience in mining and tailings departments conducting tasks such as ventilation assessments, mapping, data analysis, and project management. His skills include strong communication, safety advocacy, and adaptability.
Ana Herrera Resume
Ana Herrera has a Bachelor of Science in Chemistry from The University of Texas Pan American with a 3.36 GPA. She has experience teaching chemistry and programming to elementary students and has instructed organic chemistry labs at UTPA. Her skills include using various lab equipment and software for tasks like chromatography, spectroscopy, and NMR. She has conducted research projects analyzing components in foods and determining bacterial presence.
ArielleHallResume(Updated)
Arielle Hall has experience as a United States Army supply specialist and weapons armorer in both South Korea and Iraq from 2009 to 2012. She is currently pursuing a B.F.A. in Illustration from Savannah College of Art and Design, anticipated to graduate in May 2018. Her resume highlights skills in Microsoft Office, Adobe Photoshop, Adobe Illustrator, and typing 40 words per minute. She has also worked as a security officer, displaying conflict resolution and threat detection abilities, and as a sales associate demonstrating leadership and business development expertise.
Andy Loberg Resume
This real estate agent is a self-motivated and conscientious professional with over 25 years of customer service experience. They work diligently to understand their clients' goals and provide honest and transparent service. They help buyers and sellers through the entire real estate transaction process while focusing on both immediate and long-term goals. Their reputation is built on trustworthy communication and active listening skills that make them a trusted advisor.
Ariel Hiller-warehouseresume
This document is a resume for Ariel Hiller. It summarizes her work experience as a Receiving Supervisor at Trimark Economy Restaurant Fixtures, where she supervised a team of 6 workers and conducted quality control. It also mentions her previous experience as a self-employed ice cream truck operator. The resume lists her contact information, qualifications like experience with business management software, and education as an Associate of Arts from City College of San Francisco.
Andrew_Sitek_RESUME_FINAL
Andrew Sitek has over 37 years of experience in geophysics. He has extensive experience processing and quality controlling 2D and 3D seismic data using various software, including ProMAX, Focus, and Geodepth. He has also worked on depth imaging, interpretation, and velocity modeling. Sitek has worked for various oil and gas companies as a geophysicist and senior geophysicist, and has also operated as an independent consultant. He is fluent in Russian and Polish and holds an M.Sc. in Applied Geophysics from the University of Mining and Metallurgy in Krakow, Poland.
Arch Resume DianeLS
Diane Louise Salisbury is a draft design technician seeking new opportunities. She has over 25 years of experience in architectural, structural, electrical, and mechanical drafting and design. Her experience includes drafting construction documents, verifying equipment details, coordinating documentation, and maintaining project files. She is proficient in AutoCAD and has a background in building inspection, sales, and project coordination.
Viewers also liked (10)
Similar to Andrew Jolliff Resume 1
JOHN CAMPBELL WAHLIN RESUME 2014
John Campbell Wahlin has over 20 years of experience as a heavy duty diesel mechanic and field service fitter. He has worked extensively on mining and construction sites throughout Australia, servicing and repairing equipment from manufacturers like Caterpillar, Komatsu, Hitachi, and more. He maintains all necessary licenses and qualifications and ensures a safe work environment through compliance with safety policies and procedures.
Patrick-Kean resume3 (2)
Patrick Kean has over 5 years of experience as a Shift Engineer at a bio-refinery in Vegreville, AB where he operates and maintains plant production. He has strong troubleshooting skills and experience safely operating and maintaining various plant equipment. Patrick Kean also has over 6 years of experience as a taxi driver in Oshawa, ON where he provided safe transportation to passengers. He has a Certificate in Engineering from Keyano College and relevant industrial plant experience and safety training.
Sajjad QC Engineer
Sajjad Abdul Shukoor has over 10 years of experience in electrical and instrumentation installations, testing, pre-commissioning, and inspections for oil and gas projects in the Middle East. He holds a B.Tech in Electrical and Electronics Engineering and is COMPEX certified. His experience includes inspection and testing of electrical equipment, cables, instruments, and fire and gas systems; loop checking; calibration; and ensuring compliance with standards.
Dominique TechnicianResume
This document is a resume for Dominique Getter applying for a technician position. It summarizes their skills and qualifications which include experience maintaining industrial electrical systems, mechanical equipment, hydraulic systems, and following OSHA regulations. It lists various safety and technical certifications. Getter has a certificate from Airstreams Renewable Energy & Communication Tower Technician Program for renewable energy and communication tower maintenance. Prior work experience includes aviation support equipment maintenance for the US Navy and insulation installation for Huntington Ingalls.
Geo Therm Ltd company main brochure 2020
The 2020 GeoTherm main company brochure showing the current inspection and services for our onshore industry and maritime services, used thoughout the world to minimise risks associated with power outages, fire and water integrity issues. Keeping businesses and vessels in operation, regardless of their location.
Resume Johnny E Byrd (1)
Johnny Byrd is a rig maintenance supervisor seeking a position to challenge himself and train future generations. He has over 15 years of experience as an electrician, mechanic, and maintenance supervisor on offshore drilling rigs. He is skilled in electrical work, troubleshooting, HVAC, drilling equipment, communications, and dealing with people under stress. He has qualifications and licenses in areas such as bottom bearing operations, marine firefighting, welding, refrigeration, electrical work, and first aid.
Qataril CV
Ruben B. Pagara Jr. is an electrical technician from the Philippines with over 15 years of experience in facilities maintenance, production equipment maintenance, and boiler operation. He holds qualifications in PLC programming, HVAC, and health and safety. Pagara currently works as a team leader and electrician for Muhammad & Ahmed Group in Doha, Qatar, where he oversees maintenance and repair tasks.
GeoThermLtd-The_Report_Magazine_article_Rig_IR_Window_retrofit_June2020.pdf
Geo Therm Ltd safety case study about installing IR windows into a offshore drilling rig electrical systems to support PM inspections into MV/HV critical equipment
My CV 2015 redo
Nathan Chapman is an experienced electrician with over 9 years of experience in installations, maintenance, and fault finding of electrical systems. He has worked in various roles gaining hands-on technical knowledge and qualifications. Chapman is passionate about renewable energy and interested in the future development of the wind industry. He has gained certifications in working safely onshore and offshore through training with Maersk.
Idris
The document provides a resume for Oladimeji Omosanya, an enthusiastic electro-mechanics and instrumentation technician with over 4 years of experience in areas such as PLC programming, SCADA configuration, electrical and instrumentation design and maintenance who is seeking a challenging role utilizing his technical skills and experience. Omosanya has worked in roles supporting automation, process control, load cell design and installation, and electrical/refrigeration maintenance and seeks to further his career.
FT WTT Brochure New
The Wind Turbine Technician Program at Francis Tuttle Technology Center includes certifications in first aid, fall protection, rescue, electrical safety, and OSHA training. Darin Campbell can be contacted at 405-717-4166 or dcampbell@francistuttle.edu for more information or to enroll. The program teaches skills needed for installing, maintaining, and repairing wind turbines over 44 class days from 8am to 3pm.
2016 new phone res
This document provides a summary of qualifications for Harold A. Winenger, including his contact information. It then lists his extensive experience and skills in maintenance, manufacturing, welding, machining, automation, and other industrial fields. It details his work history at several companies from 1980 to the present, where he held roles such as maintenance technician, manager, electrician, and process operator. His experience includes skills like robotics, PLCs, welding, machining, automation, and safety certifications.
CURRICULUM VITAE. AL SIBUG - 2016
This curriculum vitae summarizes the career of Al M. Sibug, an electrical technician with over 25 years of experience in electrical maintenance, operation, and troubleshooting for oil and gas companies. He has worked for Marathon Oil in Equatorial Guinea, Qatar Petroleum in Qatar, SONARCO-Algeria in Algeria, and Caltex Refinery in the Philippines, performing tasks like equipment maintenance, testing, repair, and commissioning. Sibug has a bachelor's degree in electrical engineering and additional training in areas like AutoCAD, generators, gas plants, safety procedures, and uninterruptible power supplies.
CURRICULUM VITAE. AL SIBUG - 2016
This curriculum vitae summarizes the career of Al M. Sibug, an electrical technician with over 25 years of experience in electrical maintenance, operation, and troubleshooting for oil and gas companies. He has worked for Marathon Oil in Equatorial Guinea, Qatar Petroleum in Qatar, SONARCO-Algeria in Algeria, and Caltex Refinery in the Philippines, performing tasks like equipment maintenance, testing, repair, and commissioning. Sibug has a bachelor's degree in electrical engineering and additional training in areas like AutoCAD, generators, gas plants, safety procedures, and uninterruptible power supplies.
Appliance Test and Tag Part 1
Test and tagging is the process of inspecting and testing electrical appliances to determine if they are electrically safe for personal use. It involves visually inspecting appliances, leads, and plugs for damage and then electrically testing the appliance. If the appliance passes both tests, a durable non-reusable tag is attached to indicate it is safe. Test and tagging is done to reduce the risk of electric shock from faulty appliances and to comply with occupational health and safety legislation.
Craig Talbot CV NG
Craig Stirling Talbot is a highly motivated and experienced High Voltage Service Engineer Team Leader with over 20 years of experience, including 8 years working on high voltage substations up to 400kV. He is currently seeking new opportunities to utilize his leadership skills and expertise in high voltage environments. His core competencies include assembly, commissioning, maintenance and repair of high voltage equipment, as well as a focus on safety and managing client relationships.
Marlin Bostwick
This document contains a resume for Marlin Bostwick that summarizes his experience as an electrician working on projects throughout Alaska and remote locations. It lists his licenses, certificates, and skills including experience with Microsoft Office, health and safety committees, and the US Air Force. His work history details various roles as an electrician, quality control inspector, and project manager for companies in Alaska, Antarctica, and the Marshall Islands dating back to 1984.
Trainer-Skills-Matrix Rory Prosser
This trainer skills matrix document provides information on Rory Prosser's qualifications, licenses, permits, and industry experience to demonstrate their competency in training and assessing rigging, scaffolding, crane operation, and forklift operation qualifications. The document lists Rory's training, assessment, and vocational qualifications including certificates in first aid, working at heights, confined spaces, traffic control, building and construction, and licenses to perform various rigging, scaffolding and crane operation duties. It also outlines Rory's experience working in industries such as power, smelting, petrochemicals, and pulp and provides evidence of continued professional development activities.
Electrical engineer
Rajesh Kumar Pathak is an electrical engineer with over 30 years of experience in various roles including as a maintenance supervisor, engineer, superintendent, and chief electrician. He has expertise in electrical engineering, software engineering, and quality engineering. His career has involved working on oil rigs, ships, and other projects in locations such as India, Nigeria, China, Malaysia, Saudi Arabia, and the UAE.
Mostogl Martin
Martin Mostogl has over 30 years of experience as a boilermaker, welder, and welding inspector. He holds numerous certifications including as a welding inspector, boilermaker, and in rigging, confined spaces, elevated work platforms and first aid. He has worked on a wide range of projects involving vessels, piping, boilers and pressure equipment in various industries including power generation, mining, oil and gas. Currently he works as an AICIP inspector and welding inspector for ALS Industrial Power Services.
Similar to Andrew Jolliff Resume 1 (20)
GeoThermLtd-The_Report_Magazine_article_Rig_IR_Window_retrofit_June2020.pdf
GeoThermLtd-The_Report_Magazine_article_Rig_IR_Window_retrofit_June2020.pdf
Andrew Jolliff Resume 1
- 1. ANDREW JOLLIFF 145 W. 5th Ave. | Apt. 2 | Garnett, KS |66032 | (785) 764-0107| AJolliff88@yahoo.com WIND TURBINE TECHNICIAN SUMMARYOF QUALIFICATIONS CertifiedWindTurbineTechnicianeducatedinelectrical andmechanical analysiswithabackgroundin heavy equipmentoperation seeksemploymentwith Windcompanythatvaluesprofessional development. Trainedto operate,maintain,andrepairwindturbines withskillsinindustrialelectricity,schematicinterpretation,and handtool operation.Validdriver’slicense,cleanbackground,andwillingtotravel orrelocate foremployment. CERTIFICATIONS AND SPECIAL TRAINING ENSA Safe Accessand Rescue HYTORC BoltingSafetyCertified TowerRescue Training OSHA 10 Certified GeneratorAlignment/Shafthog WindRigging General Construction Gearbox Design/Operation SafetyTheory& IndustryPractices Industrial Electricity Lock Out/Tag Out Hydraulics/Pneumatics AC/DCFundamentals FirstAid/AED/CPR Certified Crane Hand Signals Relay/ContactorOperations SitDown LiftTrucks StandingLiftTrucks Stock Picker Quality Assurance Dispatch Clerk EMPLOYMENT HISTORY The ColemanCompany;Olathe,KS 2010-Current Warehouse Associate Operate heavyequipmentandSAPSystem Ensure and trainteam onOSHA safetyregulations Implementstrategies toimprove processes Maintaintruck routingpaperworktocomplywithforeigntrade zone regulations ReceivedawardsforTeamwork, Safety, andShippingAccuracy AmericanEagle Outfitters;Ottawa,KS 2007-2010 Seasonal Qualityinspection ProjectManagement Trainednewteammemberson safety CountryMart; Garnett, KS 2003-2009 Stock Clerk Assisted customers andmerchandise selection Performedqualityassurance inspectionsandinventory Accountsreceivables EDUCATION Pinnacle CareerInstitute; KansasCity,MO Graduate November2015 WindTurbine Technician Certification,4.0 GPA WindTurbine TechnicianPracticum AcousticEdge Institute; Edmond,OK MECP Certification GraduatedAugust2015 Troubleshootelectrical problemsinvehiclewiring,designandbuildenclosurestoretrofit components ReceivedTopDogAchievementAwardforacademicexcellence