1. PHAPALE AMIT SUNIL
 +91 7738449264 / +91 8286632751;  phapaleamit@gmail.com
ELECTRONICS & TELECOMMUNICATION ENGINEER – INDUSTRIAL AUTOMATION
Offering nearly 3 Years of experience as PROJECT ENGINEER
CAREER OBJECTIVE:
Aspiring a challenging growth oriented position in an organization that would give me ample opportunity
and wide potential as well as to achieve my organizational goal.
PERSONAL DOSSIER:
Date Of Birth: 25 November 1992
Languages Known: English,Hindi,Marathi
Address: A/104, Laxman Apartment, Sagar Nagar, Katemanvili, Kalyan (E) 421 306
SUMMARY:
 Professional Control Technique drives and completed 3 projects with panels accommodating more
than 30 drives with Ethernet, Modbus and CTNet communication protocols used for
intercommunication within drives.
 Commissioned more than 15 drive panels.
 Completed 3 projects in Messung/Nexginie 5000 system with touch HMI.
 Completed 1 project in Messung/Nexginie 2000 with Indusoft SCADA.
SKILLS:
 Worked with Messung Ethernet and Modbus communication protocols.
 Hands On experience in various PLC based Control panels.
 PLC Programming in AB-SLC/500, MESSUNG/NEXGINIE, SIEMENS S7-300, BACKHOFF.
 HMI Programming in FUJI, E-DESIGNER,PROFACE.
 SCADA Programming in INDUSOFT, WONDERWARE
PROFESSIONAL EXPERIENCE:
1.) Hi-Tech Control Systems (Project Engineer) From August 2013 – Till date.
The company is basically control panel manufacturers for various Industrial applications. The company
are the main vendor of more than 3 companies which has consignments all over India and abroad.
Key Responsibilities:
 PLC panel electrical drawing, programming and development of PLC, HMI and SCADA as per
requirement
 Panel hardware inspection as per the wiring diagram.
 Panel logical testing as per the developed program.
 Drive & Panel commissioning.

2. ACADEMIC CREDENTIALS:
Diploma in Electronics & Telecommunication Engineering: - 2013 from AmrutVahini College of
Polytechnic from Sangamner (Mumbai University) with aggregate of 59 %.
Class X: - 2008 from Ideal English High School, Kalyan with 59%.
PROJECTS UNDERTAKEN:
MACHINE BASED PROJECTS:
Jobs Undertaken:
 Rotogravure Printing M.L.S Machine:
Rotogravure (roto or gravure for short) is a type of intaglio Printing process, in that it involves
engraving the image onto an image carrier. In gravure printing, the image is engraved onto a copper
cylinder because, like offset and flexography, it uses a rotary printing press. Unwinder, Rewinder,
common for all print units, Infeed, Outfeed, are individually driven by AC drives. Turret system with
flying splice facilitates automatic reel change-over without stopping the machine.
 Rotogravure Printing E.L.S Machine:
Control system: All the printing units, Unwinder, Rewinder, Infeed and Outfeed are individually
driven by servo motors-drives and controlled and supervised by the high performance PLC . CTNet is
used for maintaining tight synchronization between all the drives by providing fast, reliable and jitter-
free communication. Turret system with flying splice facilitates automatic reel change-over without
stopping the machine.
Operator Interface: Master operator control panel touch screen operator interface located at Rewind
side and remote operator control panel located at unwind side and individual control panel on each
printing units.
 SLITTING MACHINE:
Slitting, also known as log slitting, is a shearing operation that cuts a large roll of material into
narrower rolls. Slitting is a process in which a coil of material is cut down into a number of smaller
coils of narrower measure. Rewinder, Nip roller, are individually driven by AC drives.
 LAMANITION MACHINE:
A laminate is a material constructed by uniting two or more layers of material together. The process of
creating a laminate is lamination, which in common parlance refers to the placing of something
between layers of plastic and sealing them with heat and/or pressure, usually with an adhesive. Turret
system with flying splice facilitates automatic reel change-over without stopping the machine.
DATE: PHAPALE AMIT SUNIL