This document summarizes the capabilities of HTI Technologies in developing ceramic implant components. HTI has 20 years of success in orthopaedic implants using ceramic materials with very low wear rates. They can assist in developing ceramic components through all stages of conception, production, and quality control. HTI has advanced production capabilities including CAD/CAM, pressing, sintering, machining, and packaging, with validation of the process.

1. HIP
SPINE
TMC
DENTAL
20 years of success in orthopaedic
Hard couple ceramic / ceramic : a very
low wear rate
Significant reduction in osteolysis
Rapid Osseointegration
Great stability over time
Difference of form < 0,3 µm
Surface roughness <0,01 µm
Can be easily incorporated into your
current range of implants
Biozyr® ISO13356 Zirconia
Unmatched mechanical performances
Bioceral® ISO6474 Alumina
A « classical » in ceramic products

2. Taylor-made developments
PROCESS MASSIVE
CONCEPTION
Our team HTI is ready to assist you in developing your ceramic
components : conception by mixing ceramics, design and con-
ORDER POWDER
ORDER
straints, the production and control during the development of
CONTROL your prototype, service quality that will validate all key phases
PLANNING for the production of your parts ...
STOCK
PRESSING
Production capacities
SINTERING
Conception and methods equipped with CAD / CAM / CAPM
GRINDING
Machining directly from your solids
- Control dimensional
Isostatic pressing
- Control geometric
High temperature sintering, regulation in degree during all the
MACHINING cycle.
- Dimensional controls High precision diamond machining 3 to 5 axes
- Geometric controls
Cylindrical, spherical and surface grinding
HONING
Optical quality honing
Controls : 3D, optical without contact, surface roughness,
MARKING geometric, dimensional realized in air-conditioned laboratory
- Visual inspection Laser marking
Assembly possible in clean room under laminar flow
CONTROL Visual inspection X4 X6 white and black light.
- Visual inspection
- Dimensional controls
- Geometric controls
PACKAGING
Validation process by IQ OQ PQ
methods
V2.2009
HTI Technologies
49 av Franklin Roosevelt
F-69150 Décines Cedex
Tel :+33/4 72 02 56 96
Fax : +33/4 78 49 97 35
www.htitechnologies.com
Advanced ceramics