The ACD-2000Q is a 4-channel MPEG-4 video encoder that can display video in quad, sequential, or single modes at various frame rates and resolutions. It supports PTZ control protocols, has audio in/out ports, multiple network protocols, motion detection alarms, and integrates with ACTi software.
The document summarizes Bosch's LBC 14x2/x0 Japanese Volume Controls and LBC 1434/10 Program Selector. The volume controls come in 12W and 36W versions and can be configured for power-saving or fail-safe operation. The program selector allows selection of up to five audio channels. Both products comply with international safety standards and provide simple installation, operation, and reliability for public address systems.
The document describes the Live Content Producer, the AWS-G500 and AWS-G500HD. It is an all-in-one live production system that combines a video switcher, audio mixer, display and streaming encoder in a compact chassis. It provides flexible inputs including composite, S-video, HDMI and HD-SDI. It allows live switching between video and PC sources without quality degradation. Controls are integrated on the touchscreen interface for intuitive operation.
The CF3000PRG passive repeater panel has a 2 x 40 backlit LCD display and 6 supervisory LEDs. It can be programmed to display information from a connected control panel, including fire alarms. It provides limited control functions like silencing alarms. With up to 20 repeaters connected, it offers a cost-effective way to display system status at multiple locations with minimal wiring and no required programming.
The document summarizes the evolutions of power management in Xen. It discusses evolutions in idle power management through Xen cpuidle and run-time power management through Xen cpufreq. It provides experimental data showing improvements in SPECpower scores and reductions in idle power consumption when these features are enabled. It also discusses how guest virtual machines can impact power and how "green" guest OS designs with features like smaller tick frequencies can reduce power consumption.
The Sony AWS-G500E is a compact live production solution that combines a video switcher, audio mixer, LCD display, and streaming encoder. It allows live switching between multiple video and computer sources without quality degradation. The system is highly flexible, supporting SD, HD, and computer inputs via optional modules. It can deliver live broadcasts, recordings, and streams straight from the unit. The intuitive interface enables simple live event production with minimal equipment and setup.
The TF6000PVR by Topfield is a digital satellite receiver with personal video recording (PVR) and wireless LAN (WLAN) functionality. It has a similar design to Topfield's popular TF5000 Masterpiece receiver. Key features include support for DiSEqC 1.0-1.3 protocols, automatic switching between PAL and NTSC, YUV and S-video outputs, and the ability to record two channels while viewing a third live or from the hard drive. Setup of the receiver and its WLAN connection is straightforward thanks to the detailed user manual.
This document provides an overview of sigma-delta converters. It discusses how sigma-delta conversion can be used to simplify the analog front-end by using oversampling and noise shaping. A decimation filter is then used in the digital domain to reduce the sampling rate. Implementations typically use switched capacitor circuits for the integrators due to their ability to accurately control gains. The document covers various sigma-delta modulator architectures and implementation options.
SoftJin provides electronic design automation (EDA) services including outsourced R&D, system design and verification, and design IP. They offer a portfolio of IPs across various domains including video, image, audio processing, communications, and memory controllers. Their services focus on multimedia applications and they provide consulting, IP development and licensing, and system reengineering. Their goal is to provide innovative customized solutions for electronic design and manufacturing.
The document summarizes Bosch's LBC 14x2/x0 Japanese Volume Controls and LBC 1434/10 Program Selector. The volume controls come in 12W and 36W versions and can be configured for power-saving or fail-safe operation. The program selector allows selection of up to five audio channels. Both products comply with international safety standards and provide simple installation, operation, and reliability for public address systems.
The document describes the Live Content Producer, the AWS-G500 and AWS-G500HD. It is an all-in-one live production system that combines a video switcher, audio mixer, display and streaming encoder in a compact chassis. It provides flexible inputs including composite, S-video, HDMI and HD-SDI. It allows live switching between video and PC sources without quality degradation. Controls are integrated on the touchscreen interface for intuitive operation.
The CF3000PRG passive repeater panel has a 2 x 40 backlit LCD display and 6 supervisory LEDs. It can be programmed to display information from a connected control panel, including fire alarms. It provides limited control functions like silencing alarms. With up to 20 repeaters connected, it offers a cost-effective way to display system status at multiple locations with minimal wiring and no required programming.
The document summarizes the evolutions of power management in Xen. It discusses evolutions in idle power management through Xen cpuidle and run-time power management through Xen cpufreq. It provides experimental data showing improvements in SPECpower scores and reductions in idle power consumption when these features are enabled. It also discusses how guest virtual machines can impact power and how "green" guest OS designs with features like smaller tick frequencies can reduce power consumption.
The Sony AWS-G500E is a compact live production solution that combines a video switcher, audio mixer, LCD display, and streaming encoder. It allows live switching between multiple video and computer sources without quality degradation. The system is highly flexible, supporting SD, HD, and computer inputs via optional modules. It can deliver live broadcasts, recordings, and streams straight from the unit. The intuitive interface enables simple live event production with minimal equipment and setup.
The TF6000PVR by Topfield is a digital satellite receiver with personal video recording (PVR) and wireless LAN (WLAN) functionality. It has a similar design to Topfield's popular TF5000 Masterpiece receiver. Key features include support for DiSEqC 1.0-1.3 protocols, automatic switching between PAL and NTSC, YUV and S-video outputs, and the ability to record two channels while viewing a third live or from the hard drive. Setup of the receiver and its WLAN connection is straightforward thanks to the detailed user manual.
This document provides an overview of sigma-delta converters. It discusses how sigma-delta conversion can be used to simplify the analog front-end by using oversampling and noise shaping. A decimation filter is then used in the digital domain to reduce the sampling rate. Implementations typically use switched capacitor circuits for the integrators due to their ability to accurately control gains. The document covers various sigma-delta modulator architectures and implementation options.
SoftJin provides electronic design automation (EDA) services including outsourced R&D, system design and verification, and design IP. They offer a portfolio of IPs across various domains including video, image, audio processing, communications, and memory controllers. Their services focus on multimedia applications and they provide consulting, IP development and licensing, and system reengineering. Their goal is to provide innovative customized solutions for electronic design and manufacturing.
The 9520 series pulse generator from Quantum Composers provides up to 8 independent digitally controlled output channels with precise timing resolution down to 250 ps. It offers a variety of output types including electrical, high voltage, and optical. Key features include high speed incrementing of delay and pulse widths, user selectable external and internal clock rates, and a modular design that allows for customizing the instrument with different output modules.
This document provides a summary of products from Audio Authority including distribution amplifiers, switchers, converters, and other interface devices. The first section describes the AVAtrix HD home theater matrix routing system which can distribute HD video and audio over Cat5 cabling up to 1000 feet. Other sections cover Cat5 wallplates, single source distribution, HDMI and DVI extenders and switchers, and video and audio converters.
The document tests and reviews the Skyworth HTA6 DVB-T2 receiver. It has the following key points:
1. The receiver has a simple minimalist design with rounded edges and includes connections like HDMI, audio/video ports, and a USB port.
2. It can receive both DVB-T and DVB-T2 signals and has a quick automatic channel scan.
3. The menu system is divided into submenus that allow customizing the channel list, picture settings, and other options. It supports resolutions up to 1080p.
The Topfield TF7700HSCI is an HDTV receiver that can process DVB-S2 QPSK and 8PSK signals. It has an eye-catching design and user-friendly interface. Testing showed it was able to receive HDTV channels without issues. However, its channel memory of 5000 channels is on the low side, and the included satellite list and remote control codes are not fully updated.
This document provides a list of function codes for the Aastra 400 phone system. It includes over 50 function codes organized in a table with the function, function code, and whether it can be used for remote control. The function codes allow users to activate features and functions not available in the phone menu, such as call forwarding, do not disturb, text messages, and voice mail options.
The P.168-W switch from EMP-Centauri can be controlled by both DiSEqC 1.1 and DiSEqC 1.2 commands, allowing it to switch between 8 LNB inputs. Normally, DiSEqC 1.2 is used for motor control, but this switch recognizes the 1.2 "position of the motor" commands to sequentially switch its inputs. This allows receivers that only support DiSEqC 1.0 or 1.2 to control the 8-input switch. The switching is very fast, comparable to a motorized dish system.
The P.168-W switch from EMP-Centauri can be controlled by both DiSEqC 1.1 and DiSEqC 1.2 commands, allowing it to switch between 8 LNB inputs. Normally, DiSEqC 1.2 is used for motor control, but this switch recognizes the 1.2 "position of the motor" commands to sequentially switch its inputs. This allows receivers that only support DiSEqC 1.0 or 1.2 to control the 8-input switch. The switching is very fast, comparable to a motorized dish system.
This document provides product data and specifications for the BLF578 power LDMOS transistor for broadcast and industrial applications from 108 MHz to 500 MHz. Key features include a typical pulsed output power of 1200W at 225 MHz with 71% efficiency. It has integrated ESD protection and is compliant with the RoHS directive. The device is sensitive to electrostatic discharge and should be handled with care. It has a ceramic flanged balanced package and ordering information is provided. Limiting values and thermal/electrical characteristics are specified.
This document provides a wireless LAN site survey and design for Gamma Beam Defense Systems. It analyzes the site using computer modeling and on-site testing to develop a design using Cisco 1240AG access points and external antennas. The design targets a minimum signal strength of -67 dBm throughout indoor areas to support current and future WiFi clients, including VoWLAN phones. Spectrum analysis found moderate to high interference from various sources. The recommended design uses a combination of low and medium gain omni-directional and directional antennas mounted on walls and ceilings to provide reliable coverage.
Verification and validation of OMAP chips is a large, complex process that involves verifying modules, subsystems, and the full chip. It utilizes a strict methodology with defined verification plans, reviews, and metrics to help ensure thorough testing and integration of the many components in a timely manner.
The document provides instructions for installing the BDCOM S2508B hardware switch. It includes:
- An overview of the standard configuration which includes 8 1000Mbps Ethernet RJ45 ports, 2 1000Mbps SFP ports, and 1 console port.
- Safety guidelines for installation including electrostatic discharge prevention and environmental requirements.
- Step-by-step instructions for installing the machine box on a desk or cabinet and connecting the console, SFP, and Ethernet ports.
- Procedures for checking the installation, opening/closing the machine box, upgrading memory, and analyzing hardware faults.
Raise your Uptime - How to monitor heterogeneous server environments with LinuxWerner Fischer
This document discusses monitoring heterogeneous server environments with Linux. It introduces Icinga as a monitoring tool and IPMI for hardware monitoring. The presentation agenda covers why monitoring is important, how to set up Icinga, an introduction to IPMI, IPMI sensor classes, the IPMI plugin, and IPMI service checks. The conclusions emphasize that Icinga and IPMI can be used together to monitor hardware and receive real-time alerts about issues.
Interface has developed an Advance File Graphics Server (AFGS) for a major avionics OEM that provides functionality equivalent to a Class III Electronic Flight Bag (EFB). The unit will be certified to RTCA DO-160D for environmental conditions and to RTCA DO-254 and RTCA DO-178B Level B for functionality. The AFGS employs a high-end Pentium® M processor with ARINC 429, Ethernet, RS-422, and USB interfaces, and accepts up to four external video sources of NTSC, S-Video, or PAL formats. The AFGS provides both rendered video images and multiplexed video sources to the aircraft's existing display units.
This paper presents a second-order delta-sigma modulator designed for pressure sensor applications. The modulator utilizes correlated double sampling in the first integrator to reduce flicker noise. It was implemented in a 0.35-μm CMOS process and consumes 14μA of current. Measurements showed a signal-to-noise ratio of 86dB at a 14-bit resolution level when using an input sampling rate of 1/4 and sampling capacitors of 50pF. The modulator provides a flexible design that allows tuning the sampling frequency and capacitor size to tradeoff between power consumption and performance.
The document describes the ACD-2100 1-channel MPEG-4 video encoder. It can encode video at 25/30 fps up to full D1 resolution with selectable MPEG-4 SP or MJPEG compression. It supports two-way audio, video motion detection, digital and analog inputs/outputs, and serial ports for PTZ control. Accessories include rackmount kits for mounting multiple devices.
The ACD-2100 is a 1-channel MPEG-4 video encoder that can stream video at up to 30 fps at full D1 resolution with selectable MPEG-4 or MJPEG compression. It has digital and analog video inputs/outputs, two-way audio, video motion detection, and serial ports for PTZ control. The encoder is compact at 112 x 37.2 x 119 mm and has a DC 12V power source consuming 3.8W.
The document describes the ACD-2100 1-channel MPEG-4 video encoder. It can encode video at 25/30 fps at full D1 resolution with selectable MPEG-4 SP or MJPEG compression. It supports two-way audio, video motion detection, digital and analog inputs/outputs, and serial ports for PTZ control. Accessories include 19-inch rackmount kits for mounting multiple devices.
This document provides specifications for the TCD-2500 1-channel H.264 video encoder. It can encode video at various resolutions up to full D1 at 25/30 fps with H.264, MPEG-4, or MJPEG compression. It supports dual video streaming, two-way audio, video motion detection, and local storage in an optional HDD. Connectivity includes Ethernet, serial ports, analog and digital I/O, and it measures 147x51x139.5 mm.
This document provides specifications for the TCD-2500 1-channel H.264 video encoder. It can encode video at various resolutions and frame rates, supports H.264, MPEG-4, and MJPEG compression, and has features like dual streaming, motion detection, PTZ control, and local storage. Key specifications include an Ethernet port, analog video inputs/outputs, power/dimensions, and operating temperature range. It is compatible with ACTi unified video solutions and software.
This document provides specifications for the TCD-2500 1-channel H.264 video encoder. It can encode video at various resolutions and frame rates, supports H.264, MPEG-4, and MJPEG compression, and has features like dual streaming, motion detection, PTZ control, and local storage. Key specifications include an Ethernet port, DC power input, analog and digital I/O, and support for integration into unified video management solutions.
The ACD-2400 is a 16-channel MPEG-4 1U video encoder that can encode video at 25/30 fps up to full D1 resolution per channel. It supports MPEG-4 and MJPEG compression, two-way audio per channel, motion detection per channel, and PTZ control via serial ports. It has 1U rack-mountable dimensions, supports network protocols like TCP/IP, and is compatible with ACTi software for unified solutions.
The 9520 series pulse generator from Quantum Composers provides up to 8 independent digitally controlled output channels with precise timing resolution down to 250 ps. It offers a variety of output types including electrical, high voltage, and optical. Key features include high speed incrementing of delay and pulse widths, user selectable external and internal clock rates, and a modular design that allows for customizing the instrument with different output modules.
This document provides a summary of products from Audio Authority including distribution amplifiers, switchers, converters, and other interface devices. The first section describes the AVAtrix HD home theater matrix routing system which can distribute HD video and audio over Cat5 cabling up to 1000 feet. Other sections cover Cat5 wallplates, single source distribution, HDMI and DVI extenders and switchers, and video and audio converters.
The document tests and reviews the Skyworth HTA6 DVB-T2 receiver. It has the following key points:
1. The receiver has a simple minimalist design with rounded edges and includes connections like HDMI, audio/video ports, and a USB port.
2. It can receive both DVB-T and DVB-T2 signals and has a quick automatic channel scan.
3. The menu system is divided into submenus that allow customizing the channel list, picture settings, and other options. It supports resolutions up to 1080p.
The Topfield TF7700HSCI is an HDTV receiver that can process DVB-S2 QPSK and 8PSK signals. It has an eye-catching design and user-friendly interface. Testing showed it was able to receive HDTV channels without issues. However, its channel memory of 5000 channels is on the low side, and the included satellite list and remote control codes are not fully updated.
This document provides a list of function codes for the Aastra 400 phone system. It includes over 50 function codes organized in a table with the function, function code, and whether it can be used for remote control. The function codes allow users to activate features and functions not available in the phone menu, such as call forwarding, do not disturb, text messages, and voice mail options.
The P.168-W switch from EMP-Centauri can be controlled by both DiSEqC 1.1 and DiSEqC 1.2 commands, allowing it to switch between 8 LNB inputs. Normally, DiSEqC 1.2 is used for motor control, but this switch recognizes the 1.2 "position of the motor" commands to sequentially switch its inputs. This allows receivers that only support DiSEqC 1.0 or 1.2 to control the 8-input switch. The switching is very fast, comparable to a motorized dish system.
The P.168-W switch from EMP-Centauri can be controlled by both DiSEqC 1.1 and DiSEqC 1.2 commands, allowing it to switch between 8 LNB inputs. Normally, DiSEqC 1.2 is used for motor control, but this switch recognizes the 1.2 "position of the motor" commands to sequentially switch its inputs. This allows receivers that only support DiSEqC 1.0 or 1.2 to control the 8-input switch. The switching is very fast, comparable to a motorized dish system.
This document provides product data and specifications for the BLF578 power LDMOS transistor for broadcast and industrial applications from 108 MHz to 500 MHz. Key features include a typical pulsed output power of 1200W at 225 MHz with 71% efficiency. It has integrated ESD protection and is compliant with the RoHS directive. The device is sensitive to electrostatic discharge and should be handled with care. It has a ceramic flanged balanced package and ordering information is provided. Limiting values and thermal/electrical characteristics are specified.
This document provides a wireless LAN site survey and design for Gamma Beam Defense Systems. It analyzes the site using computer modeling and on-site testing to develop a design using Cisco 1240AG access points and external antennas. The design targets a minimum signal strength of -67 dBm throughout indoor areas to support current and future WiFi clients, including VoWLAN phones. Spectrum analysis found moderate to high interference from various sources. The recommended design uses a combination of low and medium gain omni-directional and directional antennas mounted on walls and ceilings to provide reliable coverage.
Verification and validation of OMAP chips is a large, complex process that involves verifying modules, subsystems, and the full chip. It utilizes a strict methodology with defined verification plans, reviews, and metrics to help ensure thorough testing and integration of the many components in a timely manner.
The document provides instructions for installing the BDCOM S2508B hardware switch. It includes:
- An overview of the standard configuration which includes 8 1000Mbps Ethernet RJ45 ports, 2 1000Mbps SFP ports, and 1 console port.
- Safety guidelines for installation including electrostatic discharge prevention and environmental requirements.
- Step-by-step instructions for installing the machine box on a desk or cabinet and connecting the console, SFP, and Ethernet ports.
- Procedures for checking the installation, opening/closing the machine box, upgrading memory, and analyzing hardware faults.
Raise your Uptime - How to monitor heterogeneous server environments with LinuxWerner Fischer
This document discusses monitoring heterogeneous server environments with Linux. It introduces Icinga as a monitoring tool and IPMI for hardware monitoring. The presentation agenda covers why monitoring is important, how to set up Icinga, an introduction to IPMI, IPMI sensor classes, the IPMI plugin, and IPMI service checks. The conclusions emphasize that Icinga and IPMI can be used together to monitor hardware and receive real-time alerts about issues.
Interface has developed an Advance File Graphics Server (AFGS) for a major avionics OEM that provides functionality equivalent to a Class III Electronic Flight Bag (EFB). The unit will be certified to RTCA DO-160D for environmental conditions and to RTCA DO-254 and RTCA DO-178B Level B for functionality. The AFGS employs a high-end Pentium® M processor with ARINC 429, Ethernet, RS-422, and USB interfaces, and accepts up to four external video sources of NTSC, S-Video, or PAL formats. The AFGS provides both rendered video images and multiplexed video sources to the aircraft's existing display units.
This paper presents a second-order delta-sigma modulator designed for pressure sensor applications. The modulator utilizes correlated double sampling in the first integrator to reduce flicker noise. It was implemented in a 0.35-μm CMOS process and consumes 14μA of current. Measurements showed a signal-to-noise ratio of 86dB at a 14-bit resolution level when using an input sampling rate of 1/4 and sampling capacitors of 50pF. The modulator provides a flexible design that allows tuning the sampling frequency and capacitor size to tradeoff between power consumption and performance.
The document describes the ACD-2100 1-channel MPEG-4 video encoder. It can encode video at 25/30 fps up to full D1 resolution with selectable MPEG-4 SP or MJPEG compression. It supports two-way audio, video motion detection, digital and analog inputs/outputs, and serial ports for PTZ control. Accessories include rackmount kits for mounting multiple devices.
The ACD-2100 is a 1-channel MPEG-4 video encoder that can stream video at up to 30 fps at full D1 resolution with selectable MPEG-4 or MJPEG compression. It has digital and analog video inputs/outputs, two-way audio, video motion detection, and serial ports for PTZ control. The encoder is compact at 112 x 37.2 x 119 mm and has a DC 12V power source consuming 3.8W.
The document describes the ACD-2100 1-channel MPEG-4 video encoder. It can encode video at 25/30 fps at full D1 resolution with selectable MPEG-4 SP or MJPEG compression. It supports two-way audio, video motion detection, digital and analog inputs/outputs, and serial ports for PTZ control. Accessories include 19-inch rackmount kits for mounting multiple devices.
This document provides specifications for the TCD-2500 1-channel H.264 video encoder. It can encode video at various resolutions up to full D1 at 25/30 fps with H.264, MPEG-4, or MJPEG compression. It supports dual video streaming, two-way audio, video motion detection, and local storage in an optional HDD. Connectivity includes Ethernet, serial ports, analog and digital I/O, and it measures 147x51x139.5 mm.
This document provides specifications for the TCD-2500 1-channel H.264 video encoder. It can encode video at various resolutions and frame rates, supports H.264, MPEG-4, and MJPEG compression, and has features like dual streaming, motion detection, PTZ control, and local storage. Key specifications include an Ethernet port, analog video inputs/outputs, power/dimensions, and operating temperature range. It is compatible with ACTi unified video solutions and software.
This document provides specifications for the TCD-2500 1-channel H.264 video encoder. It can encode video at various resolutions and frame rates, supports H.264, MPEG-4, and MJPEG compression, and has features like dual streaming, motion detection, PTZ control, and local storage. Key specifications include an Ethernet port, DC power input, analog and digital I/O, and support for integration into unified video management solutions.
The ACD-2400 is a 16-channel MPEG-4 1U video encoder that can encode video at 25/30 fps up to full D1 resolution per channel. It supports MPEG-4 and MJPEG compression, two-way audio per channel, motion detection per channel, and PTZ control via serial ports. It has 1U rack-mountable dimensions, supports network protocols like TCP/IP, and is compatible with ACTi software for unified solutions.
This document summarizes the specifications of the TCD-2100 1-channel H.264 video encoder. It can encode video at 25/30 fps up to full D1 resolution using H.264, MPEG-4 SP, or MJPEG compression. It supports video motion detection and PTZ control via serial ports. Network connectivity is provided via an Ethernet port and the device supports ONVIF and other integration protocols.
This document summarizes the specifications of the TCD-2100 1-channel H.264 video encoder. It can encode video at 25/30 fps up to full D1 resolution using H.264, MPEG-4 SP, or MJPEG compression. It supports video motion detection and PTZ control via serial ports. Network connectivity is provided via an Ethernet port and the device supports ONVIF and integration with ACTi software.
The ACD-2300 is an 8-channel MPEG-4 1U video encoder that can encode video at 25/30 fps per channel at full D1 resolution. It supports MPEG-4 and MJPEG compression, 2-way audio per channel, video motion detection per channel, and PTZ control via serial ports. It is rack-mountable and measures 444 x 44.5 x 272 mm.
This document provides specifications for the DT-V21G11 21-inch multi-format LCD monitor. It supports various video formats including 3G-SDI, dual link HD-SDI, and HDMI. Key features include a full HD 1920x1080 resolution LCD panel, built-in vector scope, waveform monitor and 16-channel audio level meter for monitoring video and audio signals. The monitor is suitable for professional studio applications handling multiple video formats.
This document summarizes the features and specifications of the TeleEye RX Series video recording servers. The RX Series provides video recording, monitoring and transmission capabilities. Key features include support for multiple video inputs and recording rates up to 400fps, integrated network connectivity, event management tools, and remote access software. The servers are designed for security and surveillance applications.
The document discusses the Zoran Corporation's Activa 200 and Activa 250 chips. The Activa 200 is a system-on-a-chip solution for DVD recorders that integrates DVD recording, playback, encoding, and decoding functionality. It supports recording to various DVD formats and includes features like MPEG encoding, DivX decoding, audio processing, and graphics processing. The Activa 250 is an RF amplifier chip that works alongside the Activa 200 to support DVD reading and writing. Together the Activa 200+250 chipset provides a turnkey solution for developing DVD recorder and digital media devices.
The AV-HS410 is a live production switcher that provides:
1) High-end performance and functions in a compact body, including 9 video inputs, 6 outputs, chroma keying, transitions, and memory functions.
2) An intuitive user interface designed for live operation, with a built-in LCD monitor, memory preview, and multi-viewer display.
3) Expandability through optional input/output boards and a software development kit to add customized functions.
The document describes the TSUMV59XUS, a single-chip solution for analog TV systems that supports TV channels and various multimedia decoding functions. It integrates analog TV demodulation, video and audio decoding, processing, and output into a single chip to reduce costs. Key features include support for analog TV, MPEG-2/4, H.264, RealMedia, AVS, and other video formats as well as audio decoding and advanced sound processing. The chip also includes interfaces such as HDMI, DVI, USB and supports resolutions up to 4K.
This document describes a real-time video and image processing system that combines a Spartan 3 FPGA and DSP array on a SigC641x card. The DSP array can include up to 8 Texas Instruments 1 GHz DSPs with access to various analog and digital video I/O. Video data is preprocessed by the FPGA and DSPs before being sent to the PCI bus or between DSPs. The system provides SD and HD video I/O and is in alpha testing, with production units expected in 3Q08.
The document provides an overview of the LCD TV Rome Project training manual, including understanding LCD TVs, the inside of the Rome model TVs, main board descriptions, disassembly procedures, and troubleshooting. Specific details covered include specifications of different Rome model sizes, control panel connections, block diagrams, key functions like color adjustment and dynamic contrast, and descriptions of main components including the scaler, audio, and HDMI chips.
The document provides details about the LCD TV Rome project for a USA model training manual from December 2004. It includes sections on understanding LCD TVs, the inside of the Rome model TV, and descriptions of key parts like the scaler, audio, and ADC components. Specifications and features of different Rome model sizes are listed, along with explanations of functions like color adjustment, dynamic contrast, and brightness sensor controls.
This document provides information about a fixed dome camera called the TCM-7811. It has a 1/3" CCD image sensor, day and night functionality, and a vari-focal f3-9mm lens. It supports H.264, MPEG-4, and MJPEG video compression and has a maximum frame rate of 15fps at 1280x960 resolution. It is powered by PoE and has an IP66-rated weatherproof casing.
This document provides information on the TCM-7811 fixed dome camera, including its specifications and features. It has a 1/3" CCD sensor, H.264 video compression, day/night functionality, and supports dual video streaming. Accessories include mounting solutions, a dome cover, and power adapter. Key specifications are megapixel resolution, IP66 weatherproof rating, PoE support, and integration with ACTi software.
The document summarizes the specifications and features of the Texecom Odyssey 3 external sounder and strobe series. Key features include a 115dB volume, IP65 sealed electronics, selectable SAB/SCB mode, screw, lid, and wall tamper protection, twin alternating LEDs, and revolutionary screw retention system. It is competitively priced, easy to install, and provides uncompromising performance for professional security installations.
The document describes the TOA VM-3000 series integrated voice evacuation system. It is an EN 54 compliant system that combines emergency voice alarm and public address functions. Key features include fully digital audio processing and control, built-in voice messages, monitoring of speaker lines, and support for paging, background music, and microphone inputs. The system is suitable for small to medium venues and provides emergency evacuation and general announcement capabilities.
The document describes the TOA VM-3000 series integrated voice evacuation system. The VM-3000 series provides both emergency evacuation functions and general public address/paging functions. It is EN 54 certified and ideal for small to medium venues. The system has integrated amplifiers, supports up to 60 speaker zones, and can be configured via software.
This document provides installation instructions for installing a SV-200MA Surveillance Board in VM-2120 or VM-2240 amplifiers. The SV-200MA adds monitoring, zone control, and backup amplifier functions. It consists of an SV-200M board and SV extension board. The 10 step installation process includes setting jumpers, connecting cables between the boards, mounting the surveillance board, and replacing the amplifier cover.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's CS-154 and CS-304 outdoor wide-range speakers. The speakers use wide-range horns to provide high quality background music or paging announcements over a wide area. They are designed for outdoor use and have weatherproof enclosures that can withstand demanding environmental conditions. The speakers have adjustable impedance settings and provide high output with increased efficiency through the use of a horn and cone speaker combination.
The document describes the TOA BS-678 wall mount speaker system. It is a double-cone speaker with a wooden cabinet and stylish, compact design. It produces high quality sound for background music and announcements. Key features include an adjustable input impedance selector, push-in connector for easy wiring, and horizontal or vertical mounting orientation. Specifications include a frequency response of 150-20,000Hz, 6W or 3W power handling, and an off-white finish.
The document describes the TOA BS-633A/633AT wall mount speaker systems. The BS-633A is a basic 5" cone speaker with a transformer allowing multiple power taps. The BS-633AT includes an additional built-in attenuator, allowing connection to 2-wire and 3-wire speaker systems. Both have a compact ABS resin enclosure and push-in terminal for easy installation. Key specifications include a frequency response of 120-15,000Hz, 91dB sensitivity, and multiple power taps for 100V and 70V speaker lines.
This document summarizes an LB1-UW06-Fx cabinet loudspeaker from Bosch. It is a 6W loudspeaker intended for indoor use. It has mounting brackets for wall or ceiling mounting. It is constructed of MDF and has a durable vinyl or cloth covering available in white or black. It provides good speech intelligibility and background music reproduction.
This document summarizes a 6W loudspeaker for indoor use. It has good speech intelligibility and background music reproduction. The loudspeaker has an MDF construction with mounting brackets for wall or ceiling installation. It complies with international safety regulations and certifications.
The LA1-UW36-x is a 36W column loudspeaker for indoor use where directivity is important. It has high sensitivity and provides good speech intelligibility and background music reproduction. It has a swivel wall mounting bracket and is available in black or white. It uses four dual cone drivers and a durable MDF enclosure for reliability under extreme conditions.
The LA1-UW24-x is a 24W column loudspeaker for indoor use where directivity is important. It has good speech intelligibility and background music reproduction. It comes with a swivel wall-mounting bracket and is available in black or white. It has four high-sensitivity drivers and can be powered at full, half, or quarter power via a terminal block on the rear.
This document provides specifications for a BGT 4139TS video camera model. It includes details on the camera's image sensor, resolution, lenses, operational features like auto day/night mode and infrared LEDs, environmental tolerances, electrical requirements, mechanics including dimensions and weight, and manufacturer. The camera has a 1/3" CCD sensor, 600TVL resolution, auto settings, infrared for night vision up to 20 meters, and an IP66-rated casing.
This document provides specifications for a BGT 5504A camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. It has a 1/4" CCD image sensor, 420TVL resolution, auto day/night mode, 15m infrared range, and measures 92mm diameter by 80mm, weighing 190g.
This data sheet provides specifications for the BGT 5140A video camera, including its CCD image sensor, PAL/NTSC compatibility, effective pixel count, 420TVL horizontal resolution, low light performance down to 0.5 lux, auto day/night functionality, 3.6mm fixed focal length lens, operating temperature range of -10°C to 50°C, power requirements of 12V 150mA with a 12V 1A adapter, and compact dimensions of 60x90x190g.
This data sheet provides specifications for a BGT 9120TS security camera model. It lists technical details such as the CCD image sensor and effective pixel resolution, as well as operational features including auto day/night mode, backlight compensation, and automatic gain control. Environmental specifications note an operating temperature range of -10°C to 50°C and IP66 protection rating. The camera is powered by a 12V 370mA power supply and has dimensions of 266x97x63mm.
This data sheet provides specifications for a BGT 9119AS video camera model. It has a 1/3 inch Sony CCD image sensor that can capture video in PAL or NTSC formats with effective pixel counts of 752x582 or 768x494 respectively. The camera has a 3.6/6mm fixed lens, auto day/night functionality, and can function in temperatures from -10 to 50 degrees Celsius. It is powered by a 12V 1A adapter and has IP67 protection against dust and water.
This document provides specifications for the BGT 720TOS security camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. Key specs include a 1/3" Sony CCD image sensor, 600TVL horizontal resolution, auto day/night functionality, auto electronic shutter speed range of 1/50-1/100,000 sec for PAL and 1/60-1/100,000 sec for NTSC, operating temperature range of -10°C to +50°C, input voltage of DC12V/150mA, and compact dimensions of 102*55*40mm.
This document provides specifications for the BGT 5221AS video camera model. It includes details about the camera's image sensor, resolution, lenses, video output, day/night functionality, electrical requirements, and dimensions. Key features noted are a 1/3" Sony CCD image sensor, 480TVL horizontal resolution, auto day/night mode, infrared LEDs for night vision up to 10 meters, and DC12V 400mA power input. The camera measures 90*108*108mm and weighs 300g.
1. Viedo Encoder
ACD-2000Q 4-channel MPEG-4 Quad
Video Encoder
• 25/30 fps at full D1 resolution
• Selectable MPEG-4 SP, MJPEG compressions
• Full-screen or quad image display
• Two-way audio
• Video motion detection (per channel)
• Digital input and digital output
• Serial ports for PTZ control
PHOTO INDICATION DIMENSION DIAGRAM
9 11
121
6 [4.771]
93 41.7
7 [3.661] [1.64]
70
[2.756]
1 2 3 4 5 8 10 12
128.4 138 119
[5.055] [5.433] [4.685]
1 Audio Input / Output 6 Power LED 10 Serial Port & DC 12V
2 CAM4 - Analog Input 4 7 Serial Port LED Power Input
3 CAM3 - Analog Input 3 8 Reset Button 11 Serial Port Setting
4 CAM2 - Analog Input 2 9 Digital Input / 12 Ethernet Port Ø4.5 [0.175]
5 CAM1 - Analog Input 1 Output Unit: mm [inch]
ACCESSORY OPTIONS
Rackmount Kit
RMK-2000 19-inch (4U) rackmount kit with 8 built-in cooling fans, powered by 100-240V AC adapter. Supports up to 8 devices.
• Front-Bezel (R306-00004-000) option to cover the slot of video encoder
• Front-Bezel (R306-00007-000) option to cover the blank slot
RMK-3000 19-inch (4U) rackmount kit. Supports up to 8 devices.
• Front-Bezel (R306-00014-000) option to cover the slot of video encoder
• Front-Bezel (R306-00009-000) option to cover the blank slot
DISPLAY MODES
Display Mode Content Frame Rate Resolution Video Stream
1 2
Quad 30/25 FPS (NTSC/PAL) D1 only 1 stream, quad view
3 4
1 2
1 2 3 4 3 4
Sequential 30/25 FPS (NTSC/PAL) D1 only 1 stream at a time
period
1 3 7 FPS D1 4 independent streams
Single
2 4 15/12 FPS (NTSC/PAL) CIF 4 independent streams
* Latest product information: www.acti.com/product/
www.acti.com
* Accessory information: www.acti.com/accessory/
120220
2. IP V IDEO SOLUT ION PRODUC T
Viedo Encoder
ACD-2000Q
PRODUCT SPECIFICATION
ACD-2000Q
• Device
Device Type Video Encoder
Number of Channels 4
• PTZ
Protocol Pelco-D, Pelco-P V1 and V2, Dynacolor, Sony VISCA, American Dynamics
• Video
Compression MPEG-4 SP, MJPEG
Quad mode/ Sequential mode:
30 fps at 720 x 480 (Full D1, NTSC); 25 fps at 720 x 576 (Full D1, PAL)
Maximum Frame Rate vs.
Box
Single mode:
Resolution
7 fps at 720 x 480 (Full D1, NTSC/PAL)
15 fps at 352 x 240 (CIF, NTSC); 12 fps at 352 x 288 (CIF, PAL)
Multi-Streaming Multiple streams based on single configuration
Bit Rate 28 Kbps - 3 Mbps (per stream)
Bit Rate Mode Constant, Variable
Image Enhancement Brightness; Saturation; Contrast
Text Overlay Camera name and video loss alert
Bulle t
• Audio
Compression 8 kHz, Mono, PCM, 16 bit encoding
Audio-In 3.5 mm Phone Jack
Audio-Out 3.5 mm Phone Jack
• Network
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP,
Protocol & Service
UPnP, SNMP, Bonjour
Ethernet Port 1, Ethernet (10/100 Base-T), RJ-45 connector
C ube
Security IP address filtering; Password protected user levels
• Alarm
Alarm Trigger Video motion detection (1 region per channel); External device through digital input
Notify control center; Go to PTZ preset point or preset tour; Change camera settings;
Alarm Response Command other devices; E-mail notification with snapshots; Upload video, snapshot to FTP server;
Activate external device through digital output
Fixe d Dome
• Interface
Analog Video Input 4, CVBS, 1.0Vp-p with 75Ω BNC connector
Digital Input 2, terminal block
Digital Output 2, terminal block
Serial Port RS-485, RS-422, RS-232, terminal block
• General
Power Source /
DC 12V ±10% / 5.0 W
Consumption
S pe e d Dome
Weight 430 g (0.95 lb)
Dimensions (W x H x D) 119 mm x 41.7 mm x 122 mm (4.69" x 1.65" x 4.81")
ACD-2000Q: 0 °C ~ 50 °C (32 °F ~ 122 °F)
Operating Temperature
ACD-2000QT: -30 °C ~ 70 °C (-22 °F ~ 158 °F)
Operating Humidity 10% ~ 85% RH
Approvals Video Encoder: CE, FCC; Adapter: CE, TUV-GS, UL, RCM, CCC
• Integration
Vide o Enc oder
Unified Solution Fully compatible with ACTi software
ISV Integration Software Development Kit (SDK) available
Firmware Access Browser Microsoft Internet Explorer 6.0 or newer
Vide o De c oder
* All specifications are subject to change without notice.
www.acti.com
* All brand names and registered trademarks are the property of their respective owners.
120220