Mr. Abdul Latif is a renowned monitoring and evaluation. He obtained his Bsc in Civil Engineering Dhaka International University in 2022 and Diploma in Civil Engineering in 2018. Mr. Latif has also completed several trainings on engineering development issues. In his long professional career of more than 5 years MR Consultants Ltd. Working with Mr. Latif has consolidated experience in various projects such as monitoring and evaluation. Worked with various projects Also, have vast expertise in working in various national etc. funded by various donor agencies like World Bank, jica, ADB donors and Govt. Bangladesh. He was associated with several researches in the fields of Engineering and Rural Development Social, Roads and Highways, Health Engineering Department. Throughout his activities
I have work experience with development and renovation projects in both International /National NGOs and public construction sectors so I am well versed with the rules and regulations of local construction laws. I have supervised all my sites on time, within budget and with no safety or regulatory concerns. I am a responsible, dependable and committed Construction Supervisor who leads his team towards success in every project that I undertake. I take great pride in my success history and hope to bring my skills in problem-solving, leadership and negotiation.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
I have work experience with development and renovation projects in both International /National NGOs and public construction sectors so I am well versed with the rules and regulations of local construction laws. I have supervised all my sites on time, within budget and with no safety or regulatory concerns. I am a responsible, dependable and committed Construction Supervisor who leads his team towards success in every project that I undertake. I take great pride in my success history and hope to bring my skills in problem-solving, leadership and negotiation.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
Abdul Latif Updated 2022.docx
1. CV of Md. Abdul Latif
Page:1
Curriculum Vitae (CV)
1 PROPOSED
POSITION
:
2 NAME OF PERSON : Md. Abdul Latif
3 DATE OF BIRTH : 30 April 1999
4 NATIONALITY : Bangladeshi
5 MEMBERSHIP IN
PROFESSIONAL
SOCIETIES
: Member, Bangladesh Industrial Engineering’s Associations (BIEA)
6E EDUCATION : B. Sc in Civil Engineering from Dhaka International University
Diploma In Civil Engineering Universal Polytechnic Institute Dhaka
Higher Secondary Certificate (HSC)
Secondary School certificate (SSC)
7 OTHER TRAINING : Imparted training to the data collectors and supervisors on quality
data collection, approaches, quality checking, projects of MR
Consultants/Survey and Research System (SRS), executed by
IMED, Ministry of Planning 5 days 2022
Imparted training to the data collectors and supervisors on quality
data collection, approaches, quality checking, projects of MR
Consultants, executed by IMED, Ministry of Planning 3 Days, 2019-
20
Training on Agro-Meteorological Information Systems Development
Project (AMISDP), DAE, 5 days 2021
8 LANGUAGES &
DEGREE
OF PROFICIENCY
: Languages Speaking Reading Writing
Bengali Mother Tongue
English Medium Excellent Excellent
9 COUNTRIES OF
WORK EXPERIENCE
: Bangladesh
10 EMPLOYMENT RECORD:
EMPLOYER 1:
MR Consultants,
Dhaka
Position held: Sub-
Assistant Engineer
FROM: January 2022 TO: August 2022
Project Name: In-depth Monitoring SASEC Road Connectivity Project-
II: Improvement of Elenga-Hatikamarul-Rangpur Road to a 4-lane
Highway (1st Revision) Project RHD/ IMED, Ministry of Planning.
Description of Duties: Review project related documents for field
supervisor and field visit, FGD, physical verification and physical
structure monitoring and project quality monitoring and lab testing for
rebound hammer. The field team inspects the project by side visits and
reviews whether the project activities are being carried out as per the
approved DPP/RDPP and progress/achievement as per targets; To
review through the team whether there was any weakness in the design
of the project of road, bridge culvert, etc. Review surveys, documents
and reports with beneficiaries and affected persons.
2. CV of Md. Abdul Latif
Page:2
EMPLOYER 2:
MR Consultants JV
Survey & Research
System (SRS)
Position held:
Assistant Engineer
FROM: February 2022 TO: July 2022
Project Name: In-depth Monitoring Establishment of 7 Regional
Offices of the BPSC Secretariat including Strengthening Project.
Description of Duties: Review the project related documents facilitate
for orientation to field-supervisors and. Field visits, conduct FGD,
conduct physical verifications and monitoring of the physical structure
and monitoring and check quality of project activities.
EMPLOYER 3:
MR Consultants,
Dhaka
Position held: Field
Survey:
FROM: April 2019 TO: April 2021
Project Name: Dissemination of Agrometeorological advisories and
products to farming communities in different Upazilas and feedback
from farmers (Package No: DAE-C11) under Agro-Meteorological
Information Systems Development Project (AMISDP), DAE, MoA,
funded by World Bank
Description of Duties: Review the project related documents, KII/
checklist etc., facilitate for orientation to field-supervisors and
enumerators for data collection. Field visits, conduct FGD,
EMPLOYER 4:
MR Consultants,
Dhaka
Position held: Sub-
Assistant Engineer
FROM: Jane 2020 TO: Oct 2020
Project Name: In-depth Monitoring of the Modernization of BSTI
regional office at Chittagong and Khulna (1st Revised) Project, IMED,
Ministry of Planning.
Description of Duties: Review the project related documents, develop
survey tools/ checklist etc., facilitate for orientation to field-supervisors
and enumerators for data collection. Field visits, conduct FGD, Conduct
physical verifications and monitoring check quality of project
activities.
EMPLOYER 05
MR Consultants
Position held:
Mid-Level Engineer
FROM: January 2020 To: May 2020
Project: In-depth Monitoring of the Constriction of Barisal and Sylhet
Armed police Battalion (APBN) and Range Reserve Force (RRF) police
Line Project, IMED, Ministry of Planning.
Description of duties: Review project related documents, conduct
physical verification of construction work, checklists etc. for orientation
of field-supervisors and facilitate data collection site development work.
Conducting field visits, physical verification and monitoring of physical
structure and monitoring and checking the quality of project activities and
reporting in work report after sharing all work progress with team leader.
EMPLOYER 06:
MR Consultants
Position held:
Sub-Assistant
Engineer
FROM: Jan 2019 To: May 2019
Project: In-depth Monitoring of the physical Facilities Development
operational plan HNPSP Project
Description of duties: Reviewed project documents/ data, developed
survey tools/ checklist etc., facilitated for orientation to field-supervisors
and enumerators for data collection. Field visits, conduct physical
verifications of construction works and measurement of other
development works and monitoring of project activities
EMPLOYER 7: MR
Consultants/ IMED,
Ministry of Planning.
Position held: Sub-
Assistant Engineer
FROM: April 2019TO: August 2019
Project: Impact Evaluation of the Renovation and Modernization of 3
Industrial Relations Institutions and 22 labour Welfare Centres (1st
Revised) Project, IMED, Ministry of Planning)
Description of duties: Reviewed project documents/ data, developed
survey tools/ checklist etc., facilitated for orientation to field-supervisors
and enumerators for data collection. Field visits, conduct physical
verifications of construction works and measurement of other
development works and monitoring of project activities
EMPLOYER 8: FROM: FEB 2018TO: JUN 2018
3. CV of Md. Abdul Latif
Page:3
MR Consultants
Position held: Field
Monitoring Engineer
Project: Impact Evaluation of the Modernization of BSTI through
Procurement of Sophisticated Equipment and Infrastructure
Development of Laboratories for Accreditation (1st Revised) Project
under IMED, Ministry of Planning.
Description of duties: Review the project related documents, develop
survey tools/ Questionnaire/ checklist etc., facilitate for orientation to
data collection. Field visits, conduct FGD, conduct physical
verifications and monitoring of the physical Laboratories and
monitoring and check quality of Equipment and Infrastructure project
activities. Conduct Construction works, Infrastructures etc. Preparation
reports present report.
EMPLOYER 9:
Ifad Autos Limited
Position held: Site
Engineer
FROM: Jan 2018TO: June 2018
Project: Ifad Head office Building (Ifad tower) industrial Area Tejgaon
Dhaka,.
Description of duties: monitoring and check quality of project activities.
Conduct Construction works, Infrastructures etc.
EMPLOYER 10:
Pran RFL Company
Ltd
Position held: Sales
officer
FROM: JUL 2017 TO: Jan 2018
Description of duties: Reviewed Marketing & sales & Event Attend
pasteurize milk
Publication Final Report:
Published In-depth Monitoring Evaluation Report IMED Website:
In-depth Monitoring SASEC Road Connectivity Project-II: Improvement of Elenga-Hatikamarul-
Rangpur Road to a 4-lane Highway (1st Revision) Project RHD/ IMED, Ministry of Planning.
2022
In-depth Monitoring Establishment of 7 Regional Offices of the BPSC Secretariat including
Strengthening Project. 2022
In-Depth Monitoring of the Construction of Barisal and Sylhet Armed Police Battalion (APBN) and
Range Reserve Force (RRF) Police Lines Project, IMED, Ministry of Planning, 2020.
11 Work Undertaken that Best Illustrates Your Capability to Handle this Assignment
Mr. Abdul Latif is a renowned monitoring and evaluation. He obtained his Bsc in Civil Engineering
Dhaka International University in 2022 and Diploma in Civil Engineering in 2018. Mr. Latif has also
completed several trainings on engineering development issues. In his long professional career of
more than 5 years MR Consultants Ltd. Working with Mr. Latif has consolidated experience in
various projects such as monitoring and evaluation. Worked with various projects Also, have vast
expertise in working in various national etc. funded by various donor agencies like World Bank,
jica, ADB donors and Govt. Bangladesh. He was associated with several researches in the fields
of Engineering and Rural Development Social, Roads and Highways, Health Engineering
Department. Throughout his activities.
Some of Mr Latif’s major works experiences are summarized below, which have made him capable
to undertake the assigned tasks:
Sub-Assistants Engineer: In-depth Monitoring SASEC Road Connectivity Project-II:
Improvement of Elenga-Hatikamarul-Rangpur Road to a 4-lane Highway (1st Revision) Project
RHD/ IMED, Ministry of Planning
Sub-Assistants Engineer, In-depth Monitoring of the Modernization of BSTI regional office at
Chittagong and Khulna (1st Revised) Project, IMED, Ministry of Planning.
Civil Engineer, In-depth Monitoring Establishment of 7 Regional Offices of the BPSC
Secretariat including it’s Strengthening Project, IMED, Ministry of Planning.
Sub-Assistant Engineer (Field Monitoring), In-depth Monitoring of the Constriction of Barisal
4. CV of Md. Abdul Latif
Page:4
and Sylhet Armed police Battalion (APBN) and Range Reserve Force (RRF) police Line Project,
IMED, Ministry of Planning,
Field Survey: Dissemination of Agro meteorological advisories and products to farming
communities in different Upazilas and feedback from farmers (Package No: DAE-C11) under
Agro-Meteorological Information Systems Development Project (AMISDP), DAE, MoA,
Sub-Assistant Engineer, In-depth Monitoring of the physical Facilities Development
operational plan HNPSP Project
Field Monitoring Engineer, Impact Evaluation of the Modernization of BSTI through
Procurement of Sophisticated Equipment and Infrastructure Development of Laboratories for
Accreditation (1st Revised) Project under IMED, Ministry of Planning.
Executive, Various Projects of MR Consultants
Sales officer, Marketing Pran RFL Company Ltd, IFAD Multi Products Ltd.
CERTIFICATION
I, the undersigned, certify that (i) I was not a former employee of the Client immediately before the
submission of this proposal, and (ii) to the best of my knowledge and belief, this bio data correctly
describes myself, my qualifications, and my experience. I understand that any willful misstatement
described herein may lead to my disqualification or dismissal, if engaged.
Signature
Date of Signing
22 / 11 / 2022
Day/Month/ Year