ABB Automation Solutions

With over 65,000 products, the RS
Catalogue can assist your needs
when there is no internet access.

We offer 680 of ABB's energy efficient
But there is so much more Online for when you do have internet access: automation products, straight from our shelves.

RS Online gives you instant access to more than 500,000 products. In addition to

ABB AutomAtion
our large product range online, you can:

SolutionS
• Find what you need easily and faster with our powerful online product search
• Find all the latest products and technologies online first
• Check technical data sheets, stock and the latest prices before placing your order 2011
• Benefit from special online discounts and offers and much more

www.rsgreece.com www.rsincyprus.com www.rsinlibya.com www.rsmalta.com www.rsgreece.com www.rsincyprus.com www.rsinlibya.com www.rsmalta.com

WelCome Din RAil teRminAlS SeRieS 5000

ContentS FASt &
ReliABle: StAnDARD teRminAlS
AnD enD CoveRS
tRiPle DeCK AnD SenSoR teRminAlS
• For space saving and termination of 3 wire sensors.

03 Din RAil teRminAlS your needs,
• Entreclec 5000 Series terminals
• Mount on both asymmetric rail ’G’ profile and
• LED indicating versions are available for both PNP and NPN sensors.
• Cable size and current rating is 2.5mm² and 26 A for all types
SeRieS 5000
our commitment Top hat profile
• Approvals - UL listed,CSA certified,
NEMKO,,GL,VDE,KEMA, & ATEX

04 Din RAil teRminAlS
SeRieS SnK

07 ContACtoR RAnGe AF

12
426-171 Grey DIN rail std terminal,2.5sq.mm 26A (10)

SWitCheS 426-187 Blue DIN rail standard terminal,2.5sq.mm (10)

225-4338 White DIN rail std terminal,2.5sq.mm (10)

424-759 Grey DIN rail standard terminal,4sq.mm (10)

14 PRoCeSS ContRol
425-998
225-4344
Blue DIN rail standard terminal,4sq.mm (10)

White DIN rail standard terminal,4sq.mm (10)

193-663 Black DIN rail standard terminal,4sq.mm (10)

15
426-020 Green DIN rail standard terminal,4sq.mm (10)

motoR ContRol 193-657 Red DIN rail standard terminal,4sq.mm (10) 454-693 3 deck screw terminal 2.5sq.mm 26A (5)

426-008 Yellow DIN rail standard terminal,4sq.mm (10) 454-700 3 deck sensor terminal,type2 (5)

ABB: 120 years of 426-014 Orange DIN rail standard terminal,4sq.mm (10) 454-716 3 deck red LED sensor terminal,type3 (5)

16 AC thRee PhASe –
technological leadership.
424-866
225-4350
End cover for std 2.510sq.mm/iso 4sq.mm (5)

Blue end cover for 2.5-10sq.mm terminal (5)
454-722
454-788
3 deck LED sensor terminal,type4 (5)

3 deck green LED sensor terminal,type5 (5)
inDuCtion motoRS 447-434 Low profile jumperbar2.5sq.mm std&2deck (5) 454-801 10 way jumper bar for DIN rail terminal (5)

424-765 Standard DIN rail terminal,6sq.mm (10) 454-817 End cover for triple deck terminal block (10)
Dear Customer, 468-3659

17
Blue DINrail mount terminal block,6sq.mm (10)

SiGnAl ConDitioninG ABB is a global leader in power and automation technologies
424-771 Standard DIN rail terminal,10sq.mm (10)
iSolAtinG teRminAl
468-3665 Blue DINrail mount terminalblock,10sq.mm (10)
that enables utility and industry customers to improve their 424-787 Standard DIN rail terminal,16sq.mm (10) • For circuit interruption during testing or maintenance routines.
performance while lowering environmental impact.
19 inDuStRiAl CiRCuit
In this publication you can find a selection of the best products
424-872
277-9269
Terminal end cover for standard 16sq.mm (5)

Standard DIN rail terminal,70sq.mm

PRoteCtion together with the last introductions, all ready for immediate
277-9275 End cover for 70sq.mm standard terminal (5)

277-9281 Standard DIN rail terminal,95sq.mm
despatch. 472-9569 Grey DIN rail std terminal,150sq.mm 309A

22 GReen eneRGy Go online to see the full range of ABB products and choose the
472-9575 Grey DIN rail std terminal,240sq.mm 415A

most suitable solution for you. You can also ask for a quote online,
getting the best prices according to your needs. FuSeD leveR ACtion
• DIN mount terminals with a lever action fuse carrier
ABB unique technologies, together with RS service: a powerful
• Accepts both 20×5mm and 25×5mm fuses
tool for being competitive and successful!
• Fuse 'failed' indication terminal available with LED suitable for 24V d.c. use

627-3440 Short blade isolating terminal 4mm (10)

Place FSC 627-3456 Short blade isolating terminal 6mm (10)
EU_0026 – 02/11

logo here 426-200 Long blade DIN rail isolating terminal (10)
210-4570 Lever-action DIN rail fuse terminal (5)
Visit the ABB micosite 210-4586 Lever-action LED DIN rail fuse terminal (5)
426-266 Terminal end cover for 4sq.mm isolating (5)

www.rs-components/ABB 618-8342 Terminal end cover for 6sq.mm isolating (5)
210-4609 Lever-action DIN rail fuse terminal (5)

www.rsgreece.com www.rsincyprus.com
2 ABB AutomAtion SolutionS 2011 For more products visit www.rsinlibya.com www.rsmalta.com ABB AutomAtion SolutionS 2011 3

Din RAil teRminAlS SeRieS SnK Din RAil teRminAlS SeRieS SnK

SnK Series Din rail terminals FeeD-thRouGh teRminAl BloCKS
• SNK series terminal blocks available in 4mm² to 95mm² sizes
• 4mm, 6mm and 10mm sold in packs of 10
eARth teRminAlS
• Snap-in rapid installation & removal for 4 to 16mm²
• Screw termination for higher rated 35 to 95mm²
ABB entrelec have created a smart new Din rail • 16mm and 35mm sold in packs of 5 • 4mm, 6mm ,10mm, 16mm and 35mm sold in packs of 5
• 70mm and 95mm sold individually • 70mm and 95mm sizes sold individually
terminal series for your panel or machine build,
which adds value by introducing a modern look to
your design and reducing your costs. With RS & ABB
Din rail terminals leap into the 21st century. 666-3054
666-3058
4mm² Feed Through Terminal, Grey (10)

4mm² Feed Through Terminal, Blue (10)
Up to 20% reduction in width
666-3060 4mm² Feed Through Terminal, Yellow (10)
Revitalise your electrical installations
666-3064 4mm² Feed Through Terminal, Green (10) 666-3086 4mm² Earth terminal (5)
• Modern design without compromise 666-3067 4mm² Feed Through Terminal, Orange (10) 666-3177 6mm² Earth terminal (5)
• Same performance, smaller spacing: still compliant with the latest version of the IEC 60947-7-1 standard 666-3070 4mm² Feed Through Terminal, Brown (10) 666-3281 10mm² Earth terminal (5)
• Less terminal blocks and accessories needed to complete an installation – simpler by design 666-3073 4mm² Feed Through Terminal, Red (10) 666-3317 16mm² Earth terminal (5)
666-3076 4mm² Feed Through Terminal, Purple (10) 666-3332 35mm² Earth terminal (5)
improved marking visibility 666-3082 4mm² Feed Through Terminal, Black (10) 666-3348 70mm² Earth terminal
• New asymmetrical design offers the best visibility from any direction 666-3089 4mm² Feed Through Terminal, White (10) 666-3354 95mm² Earth terminal
• 20% greater marking surface available – space for up to 8 printed digits 666-3143 6mm² Feed Through Terminal , Orange (10)

666-3146 6mm² Feed Through Terminal , Grey (10)

666-3149 6mm² Feed Through Terminal , Blue (10)
DouBle DeCK
666-3152 6mm² Feed Through Terminal , Yellow (10) • Double deck design enables high wiring density
666-3155 6mm² Feed Through Terminal , Green (10) • Available in both 4mm² and 6mm² versions
enhanced rail assembly process 666-3159 6mm² Feed Through Terminal , Red (10) • Sold in packs of 5

• Asymmetrical shape: - Easy to handle 666-3161 6mm² Feed Through Terminal , Brown (10)

- Prevents risk of short-circuit during build 666-3165 6mm² Feed Through Terminal , White (10)

666-3168 6mm² Feed Through Terminal , Purple (10)
• Rigid design: - Improved vibration resistance
666-3174 6mm² Feed Through Terminal , Black (10)
- Low deflection when tightening
• Locking pin: - Allows up to ten blocks to be locked in position

666-3250
trouble-free connection design 10mm² Feed Through Terminal , Yellow (10)
666-3092 4mm² Double Deck Terminal Blue (5)
666-3253 10mm² Feed Through Terminal , Blue (10)
• Conductor entry engineered to optimized conductor insertion & quick connection 666-3095 4mm² Double Deck Terminal, Grey 1 (5)
666-3256 10mm² Feed Through Terminal , Orange (10)
• One or two conductors in a single entry 666-3098 4mm² Double Deck Terminal Grey 2 (5)
666-3262 6mm² Feed Through Terminal , Red (10)
• Conductors with or without ferrules supported 666-3266 6mm² Feed Through Terminal , Purple (10)
666-3102 4mm² Double Deck Terminal Orange (5)

• Screwless jumpers snap into place with positive action 666-3269 6mm² Feed Through Terminal , Green (10)
666-3171 6mm² Double Deck Terminal , Grey 2 (5)

666-3180 6mm² Double Deck Terminal , Grey 1 (5)
666-3272 6mm² Feed Through Terminal , Black (10)
666-3183 6mm² Double Deck Terminal , Blue 2 (5)
666-3275 6mm² Feed Through Terminal , Brown (10)
maintenance made easy 666-3278 6mm² Feed Through Terminal , White (10)
666-3187 6mm² Double Deck Terminal Orange 2 (5)

• Unique release method allows terminals to be simply removed mid-rail
• Terminals can be individually removed from a terminal assembly equipped
FeeD-thRouGh teRminAl BloCKS DiSConneCt teRminAlS &
with markers in place
ComPonent PluGS
• SNK series terminal blocks available in 4mm² to 95mm² sizes
• 4mm, 6mm and 10mm sold in packs of 10 • Quick disconnection terminals can provide circuit isolation
• 16mm and 35mm sold in packs of 5 • Component plugs allow components such as resistors to be
temporarily inserted into a circuit
• 70mm and 95mm sold individually
user friendly and flexible marking options • Terminals with test sockets support 2mm or 4mm test plugs
• Quick strip mounting of markers allowing multiple markers to be fitted • Tyerminals sold in packs of 5, test plugs in packs of 10
in a single action
• Pre-printed or blank marker cards available
• Easy removal of one terminal block from its terminal assembly: 666-3301 16mm² Feed Through Terminal Block, Grey (5)

markers become independent after strip mounting 666-3310 16mm² Feed Through Terminal Block, Blue (5)

• Secure marker mounting - markers remain in place in any situation 666-3313 16mm² Feed Through Terminal Block Orange (5)

666-3323 35mm² Feed Through Terminal Block Orange (5)
(vibrations, shocks etc.)
666-3326 35mm² Feed Through Terminal Block, Grey (5)
• Universal Markers Holders allow the use of standard clip-on wire markers
666-3329 35mm² Feed Through Terminal Block Blue (5)
which are compatible with most wire markers available on the market
666-3335 70mm² Feed Through Terminal Block, Grey
• Handwriting possible for maintenance operations or smaller builds
666-3339 70mm² Feed Through Terminal Block, Blue 666-3105 4mm² Blade Disconnect Terminal Grey (5)

666-3341 95mm² Feed Through Terminal Block, Grey 666-3121 4mm² Blade Disconnect Terminal Orange (5)

666-3345 95mm² Feed Through Terminal Block, Blue 666-3124 4mm² Blade Disconnect Terminal Blue (5)


Din RAil teRminAlS SeRieS SnK ContACtoR RAnGe AF

DiSConneCt teRminAlS & enD StoPS

ABB’s new control
ComPonent PluGS • For use with SNK terminal blocks
• Quick disconnection terminals can provide circuit isolation • End Sections suitable for terminals up to 16mm²
• Component plugs allow components such as resistors to be • 666-3357, 666-3133 and 666-3137 sold in packs

& protection devices
temporarily inserted into a circuit of 10
• Terminals with test sockets support 2mm or 4mm test plugs • 666-3363 sold in packs of 5
• Tyerminals sold in packs of 5, test plugs in packs of 10

one product family
666-3133 End Section (10)
ABB presents a new generation of first-class specialized components:
666-3137 End Section, Double Deck Terminal s (10) manual motor starters, contactors, overload relays and softstarters for
666-3357
motor starting solutions up to 18.5 kW / 20 hp
End Stop BAM3 (10)

666-3363 End Stop BAZH1 (5)

666-3111 4mm² Discon Terminal with 4mm test socket , Grey (5)
• Harmonized design & colour
666-3115 4mm² Discon terminal with 2mm test Socket, Grey (5)
JumPeR BARS
666-3391 Component Plug with Linking Bar (5) • For use with SNK terminal blocks • Compact and modular
666-3398 Component Plug (5) • Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch
• Pre-cut poles • Low energy consumption

DiSConneCt teRminAlS & • Small number of parts
ComPonent PluGS
• Quick disconnection terminals can provide circuit isolation • Minimum need for accessories
• Component plugs allow components such as resistors to be
temporarily inserted into a circuit 666-3452 2 Pole Jumper Bar 5mm Pitch (10) • Optimized wiring and configuration
• Terminals with test sockets support 2mm or 4mm test plugs 666-3464 4 Pole Jumper Bar 5mm Pitch (5)
• Tyerminals sold in packs of 5, test plugs in packs of 10 666-3474 2 Pole Jumper Bar 6mm Pitch (10)
• High ratings and service capability
666-3486 4 Pole Jumper Bar 6mm Pitch (5)
• Increased application possibilities

• Reliability proven over many years of experience


666-3531 4 Pole Jumper Bar 16mm Pitch
666-3385 2mm Test Plug - Dark Grey (10)
666-3389 4mm Test Plug - Dark Grey (10)


FuSe teRminAlS 666-3562 2 Pole Jumper Bar 26mm Pitch

• Feature two central jumper channels for convenient common distribution
• Available to fit 5x20mm fuses or 5x20 and 5x25mm fuses PRoteCtive CoveRS
• Sold individually • Prohibits access to the screw clamps, indicates live circuits
• 666-3411 - Compatible with SNK feed-through terminal blocks up to 35mm²
• Mounting kit supplied with 2 end stops and 2 sealing accessories
• 5 to 16mm wide covers sold in packs of 5

666-3411 Transparent Protective Cover, 1 Metre

666-3222 5x20mm Fuse Terminal, 24-60VDC BFI, Grey 666-3420 Transparent Protective Cover 6mm wide (5)

666-3225 5x20mm Fuse Terminal, Grey (5) 666-3424 Transparent Protective Cover 8mm wide (5)

666-3228 5x20mm Fuse Terminal 2mm Test Socket Gry (5) 666-3427 Transparent Protective Cover 5mm wide (5)

666-3231 5x20mm FuseTerm 2mm TestSock 24-60VdcGry (5) 666-3433 Transparent Protective Cover 10mm wide (5)

666-3238 5x20mm Fuse Terminal 115-250Vac Grey 666-3436 Transparent Protective Cover 16mm wide (5)

666-3247 5x20mm Fuse Term 2mmTest 115-250Vac Grey 666-3449 Mounting Kit for Protective Cover


ContACtoR RAnGe AF ContACtoR RAnGe AF

open type version, in Kit Form AF RAnGe ContACtoRS 4KW to 7,5KW
• AF contactors are AC/DC operated
• L: 80mm x W:45mm x H 77mm
• AF09-30-10, AF12-30-10, AF16-30-10,
Starters Protected by manual motor Starters • AF09-AF38 contactors include an electronic coil interface accepting a wide control voltage Ucmin - Ucmax.
Only four coils cover control voltages 24-500VAC or 20-500VDC
• AF ..Z contactors equipped with a Z coil type allow direct control by 24VDC, 500ma PLC output and obtain
Direct-on-line Starters Reversing Starters a reduced holding coil consumption
• AF.Z contactors withstand short dips and voltage interruptions (SEMI F47-0706 compliance)
I> I> • AF contactors have built in surge protection and does not require any additional surge suppressors
• The built in N.C. auxiliary contact is a mirror contact in compliance with annex F of IEC 60947-4-1

MS... MS...
Manual motor starter Manual motor starter
711-6228 Contactor 4kW 50/60HZ 48-130VDC Coil 711-6133 Contactor 5.5kW, 50/60HZ 250-500VDC Coil

711-6231 Contactor 4kW 50/60HZ 100-250VDC Coil 711-6266 Contactor 5.5kW 12-20VDC Coil

711-6238 Contactor 4kW 50/60HZ 250-500VDC Coil 711-6155 Contactor 5.5kW 50/60HZ 20-60VDC Coil
BEA... BEA...
Connecting link Connecting link 711-6168 Contactor 4kW50/60HZ, 48-130VDC coil 711-6244 Contactor 5.5kW 12-20VDC Coil

711-6174 Contactor 4kw 50/60HZ 100-250VDC coil 711-6076 Contactor 5.5kW, 50/60HZ, 20-60VDC Coil

BER..-4 711-6180 Contactor 4KW 50/60HZ 250-500DC Coil 711-6222 Contactor 7.5kW 50/60HZ 48-130VDC Coil
Connection set
711-6095 Contactor 4kW 50/60HZ, 48-130VDC Coil 711-6234 Contactor 7.5kW 50/60HZ 100-250VDC Coil

711-6118 Contactor 4kW 50/60HZ 100-250VDC Coil 711-6247 Contactor 7.5kW 50/60HZ 250-500VDC Coil

711-6130 Contactor 4kW, 50/60HZ 250-500VDC Coil 711-6165 Contactor 7.5kW50/60HZ, 48-130VDC coil
AF... 711-6193 Contactor 4kW 50/60HZ 48-130VDC Coil 711-6171 Contactor 7.5kw 50/60HZ 100-250VDC coil
Contactor AF...
Contactor
711-6206 Contactor 4kW 50/60HZ 100-250VDC Coil 711-6187 Contactor 7.5KW 50/60HZ 250-500DC Coil

711-6219 Contactor 4kW 50/60HZ 250-500VDC Coil 711-6092 Contactor 7.5kW50/60HZ, 43-130VDC Coil

711-6216 Contactor 4kW 50/60HZ 20-60VDC Coil 711-6115 Contactor 7.5kW, 50/60HZ 100-250VDC Coil

711-6262 Contactor 4kW 12-20VDC Coil 711-6137 Contactor 7.5kW, 50/60HZ 250-500VDC Coil
VEM4
mechanical & 711-6152 Contactor 4kW 50/60HZ 20-60VDC Coil 711-6203 Contactor 7.5kW 50/60HZ 48-130VDC Coil
electrical
interlock set 711-6240 Contactor 4kW 12-20VDC Coil 711-6200 Contactor 7.5kW 50/60HZ 100-250VDC Coil
A2-A2
Connection 711-6073 Contactor 4kW, 50/60HZ, 20-60VDC Coil 711-6212 Contactor 7.5kW 50/60HZ 250-500VDC Coil

711-6278 Contactor 4kW 12-20VDC Coil 711-6225 Contactor 7.5kW 50/60HZ 20-60VDC Coil

711-6196 AF09Z-40-00-21 24-60V50/60HZ 20-60VDC 711-6275 Contactor 7.5kW 12-20VDC Coil

Starters Protected by thermal overload Relays
711-6161 Contactor 5.5kW50/60HZ, 48-130VDC coil 711-6159 Contactor 7.5kW 50/60HZ 20-60VDC Coil

711-6177 Contactor 5.5kW 50/60HZ 100-250VDC coil 711-6253 Contactor 7.5kW 12-20VDC Coil

711-6183 Contactor 5.5KW 50/60HZ 250-500DC Coil 711-6070 Contactor 7.5kW,50/60HZ, 20-60VDC Coil

711-6098 711-6272
Direct-on-line Starters Reversing Starters Star-Delta Starters Contactor 5.5kW, 50/60HZ, 48-130VDC Coil Contactor 5.5kW 12-20VDC Coil

711-6111 Contactor 5.5kW, 50/60HZ 100-250VDC Coil 711-6199 AF16Z-40-00-21 24-60V50/60HZ 20-60VDC
Y
L

BER..-4
Connection set AF RAnGe ContACtoRS 11KW to 18,5KW
On-delay timer
A2-A2
• AF contactors are AC/DC operated
AF... Connection • L: 80mm x W:45mm x H 86mm
Contactor
• AF26-30-00, AF30-30-00, AF38-30-00
• AF09-AF38 contactors include an electronic coil interface accepting a wide control voltage Ucmin - Ucmax.
AF...
Contactor Only four coils cover control voltages 24-500VAC or 20-500VDC
• AF ..Z contactors equipped with a Z coil type allow direct control by 24VDC, 500ma PLC output and obtain
a reduced holding coil consumption
VEM4 • AF.Z contactors withstand short dips and voltage interruptions (SEMI F47-0706 compliance)
mechanical & • AF contactors have built in surge protection and does not require any additional surge suppressors
electrical
interlock set • The built in N.C. auxiliary contact is a mirror contact in compliance with annex F of IEC 60947-4-1

TF42 AF...
Thermal overload relay VEM4
mechanical &
electrical
interlock set 711-6102 Contactor 11kW50/60HZ, 48-130VDC Coil 711-6250 Contactor 15kW12-20VDC Coil
BEY..-4
Connection set 711-6124 Contactor 11kW, 50/60HZ 100-250VDC Coil 711-6082 Contactor 15kW, 50/60HZ, 20-60VDC Coil

711-6146 Contactor 11kW, 50/60HZ 250-500VDC Coil 711-6109 Contactor 18.5kW, 50/60HZ 48-130VDC Coil

TF42 TF42
711-6256 Contactor 11kW 12-20VDC Coil 711-6121 Contactor 18.5kW 50/60HZ 100-250VDC Coil
Thermal overload relay Thermal overload relay 711-6089 Contactor 11kW, 50/60HZ, 20-60VDC Coil 711-6143 Contactor 18.5kW 50/60HZ 250-500VDC Coil

711-6105 Contactor 15kW, 50/60HZ, 48-130VDC Coil 711-6269 Contactor 18.5kW12-20VDC Coil

711-6127 Contactor 15kW, 50/60HZ 100-250VDC Coil 711-6086 Contactor 18.5kW, 50/60HZ 20-60VDC Coil

VEM4 mechanical and electrical interlock set including: VM4 mechanical interlock unit including 2 fixing clips and VE4 electrical interlock block with A2-A2 connection 711-6149 Contactor 15kW, 50/60HZ 250-500VDC Coil


ContACtoR RAnGe AF ContACtoR RAnGe AF

ContACtoR RelAy SeRieS AF ConneCtion SetS AnD ACCeSSoRieS theRmAl oveRloAD RelAyS mAnuAl motoR StARteRS
• AF contactor relays are AC/DC operated
FoR SeRieS AF • Options supporting motor currents up to 38 Amps • Short-circuit and overload protection - Trip class 10A
• Include an electronic coil interface accepting a wide control voltage Ucmin - • Mechanical & Electrical Interlock kit • Overload protection class 10 but does have a adjustable setting • MS116: 12 settings ranges from 0.1 → 16 Amps
Ucmax. Only four coils cover control voltages 24-500VAC or 20-500VDC • Connection sets for Star-Delta & Reversing motor starting • Automatic or manual reset selectable • MS132: 15 settings ranges from 0.1 → 32 Amps
• Equipped with a Z coil type allow direct control by 24VDC, 500ma PLC output • Protective Covers • STOP and TEST functions • Phase loss sensitivity
and obtain a reduced holding coil consumption • Suitable for three and single phase applications
• Withstand short dips and voltage interruptions (SEMI F47 compliance)
• Built in surge protection and does not require any additional surge suppressors.
• Mechanically-linked contact elements compliant with Annex L of IEC 609947-5-1
and include the "mechanically Linked" symbol on their side

711-6590 Thermal Overload Relay TF42-0.13

711-6402 Mechanical and Electrical Interlock Unit 711-6593 Thermal Overload Relay TF42-0.17

711-6405 Connecting Link 711-6597 Thermal Overload Relay TF42-0.23

711-6408 Connecting Link 711-6607 Thermal Overload Relay TF42-0.31

711-6411 Mechanical Interlock 711-6600 Thermal Overload Relay TF42-0.41

711-6414 Fixing Clips 711-6604 Thermal Overload Relay TF42-0.55

711-6418 Connection Set for Reversing Starter 711-6613 Thermal Overload Relay TF42-0.74

711-6420 Connection Set for Star-Delta Starter 711-6616 Thermal Overload Relay TF42-1.0

711-6424 Connection Set for Star-Delta Starter 711-6610 Thermal Overload Relay TF42-1.3 711-6442 Manual Motor Starter MS132-0.16

711-6427 Connection Set for Reversing Starter 711-6629 Thermal Overload Relay TF42-1.7 711-6446 Manual Motor Starter MS132-0.25

711-6430 Protective Cover for Accessories 711-6641 Thermal Overload Relay TF42-10 711-6455 Manual Motor Starter MS132-0.4

711-6433 Additional Coil Terminal Block 711-6644 Thermal Overload Relay TF42-13 711-6458 Manual Motor Starter MS132-0.63

711-6436 Protective Cover 711-6648 Thermal Overload Relay TF42-16 711-6452 Manual Motor Starter MS132-1.0
711-6297 Contactor Relay 50/60HZ 48-130VDC
711-6622 Thermal Overload Relay TF42-2.3 711-6461 Manual Motor Starter MS132-1.6
711-6565 Cover for 3-phase busbars
711-6304 Contactor Relay 100-250V50/60HZ-DC
711-6657 Thermal Overload Relay TF42-20 711-6464 Manual Motor Starter MS132-2.5
711-6650 Thermal Overload Relay TF42-24 711-6468 Manual Motor Starter MS132-4.0
711-6307 Contactor Relay 100-250V50/60HZ-DC BuSBARS FoR SeRieS AF 711-6654 Thermal Overload Relay TF42-29 711-6477 Manual Motor Starter MS132-6.3
711-6626 Thermal Overload Relay TF42-3.1 711-6470 Manual Motor Starter MS132-10
• For use with AF range Contactors
711-6301 Contactor Relay 100-250V50/60HZ-DC
711-6663 Thermal Overload Relay TF42-35 711-6483 Manual Motor Starter MS132-12
711-6666 Thermal Overload Relay TF42-38 711-6474 Manual Motor Starter MS132-16
711-6288 Contactor Relay V50/60HZ 20-60VDC


AuxilARy ContACtS FoR SeRieS AF
• Contact blocks are front mounting with screw type connecting terminals eleCtRoniC oveRloAD RelAyS metAl Dol StARteR
711-6492 3-phase busbar 2 MMS - 65A • Fast and accurate protection for motors in the event of • 7.5kW up to15 kW starter
overload or phase failure • Require ABB TA25DU overload (typically 445-7797)
711-6496 3-phase busbar 3 MMS - 65A
• Self-powered from motor control circuit • Enclosed DOL Starters available with or without isolator and with reversing option
711-6503 3-phase busbar 2 MMS + 1 aux - 65A
• Features temperature compensation, trip contact (NC), • Available with either 230V or 400Vac coil voltage for 3 phase applications
signal contact (NO), automatic- or manual reset selectable.










711-6540 3-phase busbar 5 MMS - 100A 711-6569 Electronic Overload relay 0.10 - 0.32

711-6317 Auxiliary Contact Block, 1 Pole 711-6543 3-phase busbar 3 MMS + 1 aux - 100A 711-6578 Electronic Overload relay 0.3 - 1.00

711-6323 Auxiliary Contact Block, 1 Pole 711-6547 3-phase busbar 4 MMS + 1 aux - 100A 711-6571 Electronic Overload relay 0.8 - 2.70

711-6310 Auxiliary Contact Block, 2 Pole 711-6553 3-phase feeder terminals flat 65A & 100A 711-6575 Electronic Overload relay 1.90 - 6.30 482-4046 Metal DOL starter,7.5kW 6.4-16A 400V

711-6313 Auxiliary Contact Block, 2 Pole 711-6556 3-phase busbar 5 MMS + 1 aux - 100A 711-6584 Electronic Overload relay 5.70 - 18.9 482-4052 DOL starter,7.5kW

711-6345 Auxiliary Contact Block, 4 Pole 711-6559 3-phase busbar 3 MMS + 2 aux - 100A 711-6587 Electronic Overload relay 9.00 - 30.0 482-4068 Metal DOL starter,15kW 12.8-32A 400V

711-6351 Auxiliary Contact Block, 4 Pole 711-6562 3-phase feeder terminals high 65A 711-6581 Electronic Overload relay 15.0 - 45.0 482-4074 DOL starter,15kW


SWitCheS SWitCheS

ot SWitCh DiSConneCtoR - enCloSeD CAm SWitCheS on-oFF AnD ChAnGeoveR SWitCheS multi-SteP SWitCheS
DooR mountinG, 3-Pole • Black handle and silver front with standard text are included • Designed for resistive and slightly inductive loads • Designed for use in control circuits to EN 60947-3
• Mounts to an enclosure or cabinet door ans uses a 6mm shaft • 25A modular size for DIN rail mounting • Load rated AC22, AC23 - 690Vac voltage rating • Load rated AC22, AC23 - 690Vac voltage rating
• Can achieve IP55 Protection rating • Finger-proof tunnel terminals and interconnections • Supplied with black handle and frontplate • Options from three to eight steps, with 1, 2, and 3 pole options
• NOTE: Requires handle to be ordered separately • IP 65 rated, note Key type Cam Switch is IP54 rated • Panel or door mount - IP44 • Panel or door mount - IP44

686-7310 Switch,discon,single hole,3-Pole 16A


705-1018 25A 1P 2 Step, Multistep Switch 0-1-2
,
705-1106 25A 1P IP65 Enc 1-0-2 Chngovr Cam Switch 705-1020 25A 3P 2 Step, Multistep Switch 0-1-2
,
705-1080 25A 2P IP65 Enc 0-1 Cam Switch 705-1024 25A 1P 3 Step, Multistep Switch 0-1-2-3
,
705-1096 25A 3P IP54 Enc 0-1 Key type Cam Switch 705-1027 25A 2P 2 Step, Multistep Switch 0-1-2
,
705-1099 25A 3P IP65 Enc 0-1 Cam Switch 705-1030 25A 1P 3 Step, Multistep Switch 1-2-3
,
705-1092 25A 4P IP65 Enc 0-1 Cam Switch 705-1033 25A 2P 3 Step, Multistep Switch 0-1-2-3
,

ot SWitCh DiSConneCtoR 705-0989 25A 1P On-Off switch, round front ring 705-1036 25A 3P 3 Step, Multistep Switch 0-1-2-3
,

705-1042
- DooR mountinG, 4-Pole mini CAm SWitCheS 705-0982 25A 2P On-Off switch, round front ring 25A 3P 3 Step, Multistep Switch 1-2-3
,

705-0986 25A 3P On-Off switch, round front ring 705-1046 25A 1P 4 Step Multistep Switch 0-1-2-3-4
• Mounts to an enclosure or cabinet door ans uses • Compact panel mount switches with 705-1049 25A 2P 3 Step, Multistep Switch 1-2-3
,
705-0995 25A 4P On-Off switch, round front ring
a 6mm shaft 30x30mm panel footprint
705-0998 25A 1P Key Op C/O Cam switch, 1-0-2 705-1052 25A 1P 4 Step Multistep Switch 1-2-3-4
• Can achieve IP55 Protection rating • Ideal for use with 22mm pushbuttons - door
705-0992 25A 3P Key Op C/O Cam switch, 1-0-2 705-1055 25A 2P 4 Step Multistep Switch 0-1-2-3-4
• NOTE: Requires handle to be ordered separately or panel mount
705-1002 25A 3P C/O Cam sw/ rnd frnt rng, 1-0-2 705-1058 25A 3P 4 Step Multistep Switch 0-1-2-3-4
• Operating current 10 Amps - Max 300V
705-1005 25A 1P C/O Cam sw/ rnd frnt rng, 1-0-2 705-1061 25A 2P 4 Step Multistep Switch 1-2-3-4
• Screw termination - max cable CSA (solid/
705-1008 705-1064 25A 3P 4 Step Multistep Switch 1-2-3-4
stranded) 1.5mm² 25A 2P C/O Cam sw/ rnd frnt rng, 1-0-2

705-1011 25A 4P C/O Cam sw/ rnd frnt rng, 1-0-2 705-1068 25A 1P 5 Step Multistep Sw/ 0-1-2-3-4-5

705-1014 25A 2P C/O Cam sw/ rnd frnt rng, 1-2 705-1070 25A 1P 5 Step Multistep Switch 1-2-3-4-5

705-1074 25A 2P 5 Step Multistep Switch 1-2-3-4-5
686-7313 Switch,discon,single hole,4-Pole 16A 705-1077 25A 2P 5 Step Multistep Sw/ 0-1-2-3-4-5
686-7323 Switch,discon,single hole,4-Pole 40A voltmeteR AnD AmmeteR SWitCheS 705-1083 25A 1P 6 Step Mltistp Sw/ 1-2-3-4-5-6
705-1125 10A 1P 0-1 Mini Cam Switch 705-1086 25A 1P 8 Stp Mltistp Sw/ 1-2-3-4-5-6-7-8
• Designed to allow the selection of phase-to-phase voltage measurement
705-1134 10A 2P 0-1 Mini Cam Switch • 3 phase, 3 wire design - ammeter version supports 3 x CT
705-1137 10A 3P 0-1 Mini Cam Switch • Black handle and front plate with position indication are included
705-1131 10A 4P 0-1 Mini Cam Switch
mini ChAnGeoveR SWitCheS
705-1140 10A 1P 0-1 Mini Key Op Cam Switch • Compact panel mount switches with 30x30mm panel footprint
705-1143 10A 3P 0-1 Mini Key Op Cam Switch • Ideal for use with 22mm pushbuttons - door or panel mount
ot SeleCtoR hAnDleS AnD ShAFtS • Screw termination - max cable CSA (solid/stranded) 1.5mm²
• Handles for use with 'OT' series disconnectors mini multi-SteP SWitCheS
• 6mm shaft to match disconnector • Compact panel mount switches with 30x30mm panel footprint
• Handles available in black (BLK) or yellow & red (R/Y) • Ideal for use with 22mm pushbuttons - door or panel mount
• Screw termination - max cable CSA (solid/stranded) 1.5mm²

686-7301 Handle,selector,with padlock,IP55,R/Y 1

686-7304 Shaft, disconnect, for switch 705-1147 10A 1P 1-0-2 Mini Changeover Cam switch

686-7307 Handle,selector,with padlock,IP55,BLK 1 705-1109 25A 2P 3 Pos, 3 phs Voltmeter Switch 705-1156 10A 2P 1-0-2 Mini Changeover Cam switch

686-7351 Handle,selector,with padlock,IP55,BLK 3 705-1103 25A 2P 4 Pos, 3 phs Voltmeter Switch 705-1159 10A 3P 1-0-2 Mini Changeover Cam switch

686-7360 Handle,selector,with padlock,IP55,R/Y 3 705-1112 25A 3P 6 Pos, 3 phs - phs/N Voltmeter Sw 705-1153 10A 4P 1-0-2 Mini Changeover Cam switch

686-7373 Handle, selector type,OT100 to 125FT 705-1171 10A 1P 2 Step, Multistep Switch 0-1-2
, 705-1115 25A 3P 7 Pos, 3 phs - phs/N Voltmeter Sw 705-1162 10A 1P 1-2 Mini Changeover Cam switch

686-7376 Handle, selector type,OT16 to 80FT 705-1175 10A 2P 2 Step, Multistep Switch 0-1-2
, 705-1119 25A 3P 7 Pos, 2x3 phs-phs V Voltmeter Sw 705-1165 10A 2P 1-2 Mini Changeover Cam switch

686-7379 Handle, selector type,OT16 to 80FT 705-1184 10A 1P 3 Step, Multistep Switch 0-1-2-3
, 705-1128 25A 1P 0-1-2-3 Ammeter 3CT Switch
, 705-1169 10A 3P 1-2 Mini Changeover Cam switch

686-7382 Handle, selector type,OT100 to 125FT 705-1187 10A 2P 3 Step, Multistep Switch 0-1-2-3
, 705-1121 25A 2P 0-1-2-3 Ammeter 3CT Switch
, 705-1178 10A 4P 1-2 Mini Changeover Cam switch


PRoCeSS ContRol motoR ContRol

PSu'S tyPe CP-C AnD CP-S AC500 eCo AnAloGue i/o moDuleS ACS310 ComPACt inveRteR DRiveS ACS355 mAChineRy DRiveS
• Output currents of 5A,10A & 20A • Analogue I/O modules for the AC500eco PLC • A standard drive which was designed to be simple to install, - 3 PhASe inPut
• Integrated power reserve up to 50% • Analogue U/I modules support -2.5...+2.5 V, -5...+5 V, 0...5 V, 0...10 V, configure and use, saving engineering time • The ACS355 general machinery drives offer class-
• Parallel operation for increased capacity & 0...20 mA, 4...20 mA • Dedicated to variable torque applications such as booster pumps leading performance and intelligence
redundancy • Thermocouple modules support S, T, R, E, N, K, J, and ±80 mV • and centrifugal fans • Created to meet the needs of Machine Builders
• DIN rail mount • RTD module supports PT100, PT1000, Ni100, Ni1000, Resistance: • Built in energy saving features & load analyser function (OEMs), integrators and panel builders
• IP20 enclosure 150Ω, 300Ω • Optional Basic and Assistant control panels available • Includes feature such as sensorless vector control
and built-in brake chopper
• CP-S: 10A & 20A units have front mounted • Optional Basic and Assistant control panels available
voltage selector switch,110-120 & 220-240Vac,
Constant 24Vdc output

• CP-C: Autorange input 85-264Vac & 100-350Vdc,
22-28Vdc adjustable output, Power factor
correction (PFC) EN61000-3-2, Plug in function 704-8242 Inverter ACS355 3 Phase 380-480V 0.37kW
module CP-C MM available 704-8251 Inverter ACS355 3 Phase 380-480V 0.55kW

704-8254 Inverter ACS355 3 Phase 380-480V 0.75kW


486-1528 CP-S power supply 24V 10A 240W 704-8267 Inverter ACS355 3 Phase 380-480V 1.5kW

486-1506 CP-S power supply 24V 20A 480W 704-8260 Inverter ACS355 3 Phase 380-480V 2.2kW

486-1499 CP-C power supply 24V 5A 120W 704-8264 Inverter ACS355 3 Phase 380-480V 3.0kW

703-9995 Analog Input Module eCo AI561 4AI U/I 705-4764 Inverter ACS310 3 Phase 1.3A 0.37kW
704-0002 Analog Output Module eCo AO561 2AO U/I 705-4773 Inverter ACS310 3 Phase 2.1A 0.55kW
486-1461 Messaging module CP-C MM 704-8270 Inverter ACS355 3 Phase 380-480V 7.5kW
704-0005 Analog Input Module eCo AI562 2AI RTD 705-4776 Inverter ACS310 3 Phase 2.6A 0.75kW
704-8289 Inverter ACS355 3 Phase 380-480V 11kW
704-0008 Analog Input eCo AI563 4AI Thermocouple 705-4770 Inverter ACS310 3 Phase 3.6A 1.1kW
704-8282 Inverter ACS355 3 Phase 380-480V 15kW
705-4789
AC500 eCo PlC 704-0011 Analog I/O Module eCo AX561 4AI/2AO U/I Inverter ACS310 3 Phase 4.5A 1.5kW
705-4782 Inverter ACS310 3 Phase 6.2A 2.2kW
• An entry level PLC platform for small to medium sized applications, which 704-8295 Inverter ACS355 3 Phase 380-480V 22kW
705-4786 Inverter ACS310 3 Phase 8A 3kW
conforms to the IEC 61131-3 standard
AC500 eCo ACCeSSoRieS 705-4795 Inverter ACS310 3 Phase 9.7A 4kW
• CPU's are complete with onboard digital and analog I/Os
• Kit supplied complete with PS501 Control Builder Software , programming • Terminal blocks with screw or spring termination options 705-4798 Inverter ACS310 3 Phase 13.8A 5.5kW PSR SoFt StARteR
cable, first step CD, and carry case • Additional plug-in modules for RTC and Serial I/O 705-4792 Inverter ACS310 3 Phase 17.2A 7.5kW
• Range supports motor currents from 3 to
• Programming cables & PS 501 control builder software 705-4802 Inverter ACS310 3 Phase 25.4A 11kW
105A (1.1kW to 55kW)
705-4805 Inverter ACS310 3 Phase 34.1A 15kW
• Compact and design to complement the
705-4809 Inverter ACS310 3 Phase 41.8A 18.5kW ABB oontrol gear range
705-4818 Inverter ACS310 3 Phase 48.4A 22kW • All sizes include a run signal relay output
& optional cooling fan
• 11kW size and above includes an output
ACS355 mAChineRy DRiveS - signal for 'Top of Ramp' - Full Voltage
1 PhASe inPut
• The ACS355 general machinery drives offer class-
688-8884 AC500eco PLC starter kit & Software leading performance and intelligence
703-9991 PLC AC500 eCo PM564-T 6DI 6 DO-T 2AI 1AO • Created to meet the needs of Machine Builders
703-9998 PLC AC500 eCo PM554-T 8DI 6 DO-T (OEMs), integrators and panel builders
• Includes feature such as sensorless vector control
and built-in brake chopper
AC500 eCo DiGitAl • Optional Basic and Assistant control panels available
inPut/ outPut moDuleS 325-457 PSR Softstart 1.1kW 3A

• Digital I/O modules for the AC500eco PLC 325-491 PSR Softstart 3kW 6.5A

• 24Vdc inputs, transistor 24Vdc 0.5A outputs 325-463 PSR Softstart 4kW 8.5A

• All modules are 34mm wide 325-479 PSR Softstart 5.5kW 12A

• Terminal blocks ( 9 or 11 poles) must be 704-0030 Terminal Screw Front/Cable Side 9 pole 325-485 PSR Softstart 7.5kW 18A
purchased separately 704-0033 Terminal Screw Front/Cable Fr 9 poles 325-508 PSR Softstart 11kW 25A

704-0042 Terminal Spring Front/Cable Front 9 pole 656-6556 PSR Softstart 15kW 30A

704-0036 Terminal Screw Front/Cable Fr 11 pole 656-6562 PSR Softstart 18.5kW 37A

704-0046 Terminal Spring Front/Cable Front 11 pol 656-6578 PSR Softstart 22kW 45A

704-0049 Terminal Screw Front/Cable side 11pole 703-5123 PSR Softstart 37kW 72A

704-0014 Digital I/O Module eCo DC561 16DC 704-0068 Real Time Clock + RS485 TA562-RS-RTC 704-8239 Inverter ACS355 1 Phase 200-240V 0.37kW 703-5129 PSR Softstart 30kW 60A

704-0018 Digital Input Module eCo DI561 8DI 24VDC 704-0055 SD-Card Adapter MC503 for AC500 704-8232 Inverter ACS355 1 Phase 200-240V 0.75kW 703-5132 PSR Softstart 45kW 85A

704-0020 Digital Output eCo DO561 8DO-Transistor 704-0052 Programming cable D-Sub/D-Sub TK504 704-8236 Inverter ACS355 1 Phase 200-240V 1.1kW 703-5135 PSR Softstart 55kW 105A

704-0024 Digital I/O eCo DX561 8DI/8DO Transistor 704-0058 Programming cable D-Sub/USB TK503 704-8245 Inverter ACS355 1 Phase 200-240V 1.5kW 325-435 Replacement fan - 1.1kw to 22kW

704-0027 Digital Input Module eCo DI562 16DI 24V 704-0064 RS485 Serial Adapter TA562-RS485:AC500 704-8248 Inverter ACS355 1 Phase 200-240V 2.2kW 703-5139 Auxilliary fan for PSR 60 to 105 PSRFAN


AC thRee PhASe- inDuCtion motoRS SiGnAl ConDitioninG

2 Pole & 4 Pole, FlAnGe mounteD 3PhASe Foot inDuCtion motoR PSu'S CP-e RAnGe theRmoCouPle AnAloGue
inDuCtion motoRS • Three phase motors available in foot mounting • Primary switch mode power supplies SiGnAl ConveRteR
• Three phase motors in flange mounting • Energy efficient low noise design • Adjustable output voltages • For both J and K type thermocouples
• ideal for a wide variety of applications including pumps, fans and process • ideal for a wide variety of applications • Wide input range • Universally configurable unit with gain and offset
machinery drives • Metric frame sizes • High efficiency adjustments
• Motors in frame sizes 63-100 may be connected in either STAR (Y) • Class F insulation • Low power loss and low heating • Adjustable temperature range
for supply voltages of 380-420//440-480V 50/60Hz or DELTA for 220- • Class B temperature rise • Free convection cooling (no forced cooling by fans)
240//250-280 50/60Hz. • Top mounted terminal box • Integrated input fuse
• Motors in frame sizes 112-132 are suitable DELTA connected 380- • Corrosion resistant, low copper aluminium alloy • LED status "OUTPUT OK"
420//440-480V 50/60Hz and are also suitable for STAR/DELTA starting
• Suitable for DOL starting or inverter drive use • Protection class IP20
• Metric frame sizes to Cenelec standards
• Class F insulation with class B temperature rise
• Top mounted terminal box with metric/Pg type knockouts
• Energy efficient low noise design
• All motors have keyways and fitted keys
• Corrosion resistant, low copper aluminium alloy
• Suitable for DOL starting or inverter drive use
442-8777 3 way thermocouple analogue converter

234-442 DIN rail PSU, CP-E 5/3.0 5
univeRSAl SiGnAl ConveRteR
668-0927
FoR theRmoCouPle SiGnAlS
DIN rail PSU, CP-E 12/10.0 12

234-408 DIN rail PSU, CP-E 24/1.25 24

234-379 DIN rail PSU, CP-E 24/2.5 24
• Differential temperature measurement

668-0920 DIN rail PSU, CP-E 24/5.0 24
• Configurable output signal in case of input signal
interrupts
668-0924 DIN rail PSU, CP-E 24/10.0 24
• 3-way isolation
668-0936 DIN rail PSU, CP-E 24/20.0 24
• Short-circuit proof outputs
668-0933 DIN rail PSU, CP-E 48/5.0 48
• Adjustable temperature range
668-0930 DIN rail PSU, CP-E 48/10.0 48

Pt100 to AnAloGue SiGnAl
ConveRteR
• Supports Pt-100 resistance probes
• Six input temperature ranges (0…100 °C, 0…300 °C,
0…500 °C, -50…+ 50 °C, -50…+250 °C, -50…+450 °C)
• Three output signal ranges (0-10 V, 0-20 mA, 4-20 mA)
442-8783 Thermocouple signal converter,24-48Vdc

511-7608 Thermocouple signal converter,115-230Vac

329-0818 AC-Motor,-2-Pole,0.25kW,Frame-63B,2800rpm 266-698 AC-Motor,-2-Pole,0.25kW,Frame-63B,2800rpm AnAloGue ConveRteRS
329-0824 AC-Motor,-2-Pole,0.37kW,Frame-71A,2800rpm 266-705 AC-Motor,-2-Pole,0.37kW,Frame-71A,2800rpm • CAIS series signal converters with 3-way electrical
668-1043 AC-Motor,-2-Pole,0.55kW,Frame-71B,2800rpm 266-711 AC-Motor,-2-Pole,0.55kW,Frame-71B,2800rpm isolation
329-0830 AC-Motor,-2-Pole,0.75kW,Frame-80-A,2840rpm 266-727 AC-Motor,-2-Pole,0.75kW,Frame-80-A,2820rpm • 24Vdc supply voltage with green LED indicator
486-3984 CC-E/RTD Signal converter - 110/240Vac
329-0846 AC-Motor,-2-Pole,1.1kW,Frame-80B,2840rpm 266-733 AC-Motor,-2-Pole,1.1kW,Frame-80B,2850rpm • Compact 22mm wide DIN rail mount module
329-0852 AC-Motor,-2-Pole,1.5kW,Frame-90S,2870rpm 266-749 AC-Motor,-2-Pole,1.5kW,Frame-90S,2850rpm • Potentiometer adjustment of both gain and offset
329-0874 AC-Motor,-2-Pole,2.2kW,Frame-90L,2885rpm 266-755 AC-Motor,-2-Pole,2.2kW,Frame-90L,2860rpm CC-e SeRieS temPeRAtuRe
329-0880 AC-Motor,-2-Pole,3kW,Frame-100L,2900rpm 266-761 AC-Motor,-2-Pole,3kW,Frame-100L,2800rpm ConveRteRS
668-1046 AC-Motor,-2-Pole,4kW,Frame-112M,2895rpm 668-1018 AC-Motor,-2-Pole,4kW,Frame-112M,2895rpm
• Analogue converters for Pt100 probes
668-1040 AC-Motor,-2-Pole,5.5kW,Frame-132SA,2845rpm 668-1012 AC-Motor,-2-Pole,5.5kW,Frame-132SA,2845rpm
• Provides triple galvanic insulation between 2 (1.5 kV)
668-1059 AC-Motor,-2-Pole,7.5kW,Frame-132SB,2850rpm 668-1021 AC-Motor,-2-Pole,7.5kW,Frame-132SB,2850rpm
input, output and supply signals
329-0802 AC-Motor,-4-Pole,0.18kW,Frame-63B,1370rpm 320-023 AC-Motor,-4-Pole,0.18kW,Frame-63B,1370rpm • Connection using 2 or 3 wires, wide range of
668-1024 AC-Motor,-4-Pole,0.25kW,Frame-71A,1380rpm 320-039 AC-Motor,-4-Pole,0.37kW,Frame-71B,1400rpm temperatures
320-130 AC-Motor,-4-Pole,0.75kW,Frame-80B,1410rpm 320-045 AC-Motor,-4-Pole,0.55kW,Frame-80-A,1410rpm • Selection of input and output via switches
320-146 AC-Motor,-4-Pole,1.1kW,Frame-90S,1410rpm 320-051 AC-Motor,-4-Pole,0.75kW,Frame-80B,1410rpm • DIN rail mounted
320-152 AC-Motor,-4-Pole,1.5kW,Frame-90L,1420rpm 320-067 AC-Motor,-4-Pole,1.1kW,Frame-90S,1410rpm

320-168 AC-Motor,-4-Pole,2.2kW,Frame-100LA,1430rpm 320-073 AC-Motor,-4-Pole,1.5kW,Frame-90L,1420rpm 442-8755 3 way analogue converter,0-10V/4-20mA

668-1028 AC-Motor,-4-Pole,3kW,Frame-100LB,1430rpm 320-095 AC-Motor,-4-Pole,3kW,Frame-100LB,1430rpm 442-8840 3 way analogue converter,0-20mA/0-10V

668-1037 AC-Motor,-4-Pole,4kW,Frame-112M,1430rpm 320-102 AC-Motor,-4-Pole,4kW,Frame-112M,1430rpm 442-8878 3 way analogue converter,0-10V/0-20mA

668-1030 AC-Motor,-4-Pole,5.5kW,Frame-132-S,1435rpm 193-1719 AC-Motor,-4-Pole,5.5kW,Frame-132S,1440rpm 442-8907 3 way analogue converter,0-20mA/0-20mA

668-1034 AC-Motor,-4-Pole,7.5kW,Frame-132M,1455rpm 193-1725 AC-Motor,-4-Pole,7.5kW,Frame-132-M,1440rpm 139-189 Signal con + relay CC-E/RTD/I 0-100 C/4-20MA 442-9067 3 way analogue converter,0-10V/0-10V


SiGnAl ConDitioninG inDuStRiAl CiRCuit PRoteCtion

univeRSAl RmS voltAGe AnAloGue DuAl level tyPe B mCB - 1Pole 10KA tyPe B mCB - 3Pole 10KA
ConveRteR thReSholD RelAy • Type 'B' trip characteristic (3-5x nominal current rating) • Type 'B' trip characteristic (3-5x nominal current rating)
• RMS signal converter suitable for input • Standard signal converter with 7 input • suitable for filament lamps, heating loads and most building protection applications • suitable for filament lamps, heating loads and most building protection applications
voltages of up to 600V ac or dc, of any setting ranges • Standard 17.5mm width • Standard 52.5mm width
waveform • Two threshold relay C/O outputs (threshold • Max. operating voltage: 440Vac, 60Vdc • Max. operating voltage: 440Vac, 60Vdc
• 3-way isolation and respective hysteresis can be adjusted
• DIP-switch selection of 8 input ranges, and 11 independently from each other)
output ranges (volt / current) • 2 yellow LEDs for clear status indication of
the output relays

511-7484 RMS voltage signal converter,115-230Vdc

511-7614 RMS voltage signal converter,24-48Vdc 511-7579 CC-U/STDR Analogue dual level relay,24-48Vdc

univeRSAl SiGnAl Cm-mPS, 3-PhASe 535-5973 6A SINGLE POLE TYPE B MCB 535-6061 6A TRIPLE POLE TYPE B MCB

ConveRteR monitoRinG RelAy 535-5989 10A SINGLE POLE TYPE B MCB 535-6083 10A TRIPLE POLE TYPE B MCB

535-5995 16A SINGLE POLE TYPE B MCB 535-6099 16A TRIPLE POLE TYPE B MCB
• Monitoring of three-phase mains for
• The most flexible signal converter 535-6005 20A SINGLE POLE TYPE B MCB 535-6106 20A TRIPLE POLE TYPE B MCB
phase sequence, phase failure, over- and
available with 3-way isolation, and more 535-6011 32A SINGLE POLE TYPE B MCB 535-6112 25A TRIPLE POLE TYPE B MCB
undervoltage as well as phase unbalance
than 120 different configurations
• Tripping delay can be adjusted or switched off 535-6033 40A SINGLE POLE TYPE B MCB 535-6128 32A TRIPLE POLE TYPE B MCB
• 11 input and 11 output signal type
by means of a logarithmic scale 535-6055 63A SINGLE POLE TYPE B MCB 535-6162 63A TRIPLE POLE TYPE B MCB
selections available
• ON-delayed or OFF-delayed tripping delay
• Short-circuit proof signal outputs
selectable
prevents damage
• Powered by the measuring circuit tyPe B DouBle Pole 10KA mCBS tyPe C mCB - 1Pole 10KA
• True RMS measuring principle • Type 'B' trip characteristic (3-5x nominal current rating) • Type C characteristic offers short circuit response of 5-10 x normal rated current
• 2 c/o (SPDT) contacts • EN 60898 • For motor control and fluorescent lighting installations
• DIN rail mounting, standard 35mm width • Standard 17.5mm width
• Max. operating voltage 440Vac • Max. operating voltage: 440Vac, 60Vdc

703-5094 Three-phase monitoring relay CM-MPS.21
442-8806 3way analogue signal converter,24-48Vdc

SeRiAl DAtA ConveRteRS thRee-PhASe monitoRinG
• Serial data converters supporting RS-232 and RelAy Cm-PvS
RS-485/422 • Monitoring of three-phase mains for phase sequence,
• Use to convert or extend the transmission phase failure, over- and undervoltage as well as phase
range of serial data connections unbalance
• Ethernet converter enables serial data to be • Powered by the measuring circuit
transmitted over local Ethernet network • True RMS measuring principle
• Options for both 24Vdc and 110/240Vac • 2 c/o (SPDT) contacts
supplies
535-4093 1A SINGLE POLE TYPE C MCB

535-4100 2A SINGLE POLE TYPE C MCB

132-093 6A 2 POLE 10kA MCB B CURVE 535-4122 4A SINGLE POLE TYPE C MCB






460-409 ILPH RS232/485 to Ethernet Converter 132-059 32A 2 POLE 10kA MCB B CURVE 535-4188 32A SINGLE POLE TYPE C MCB

460-398 Converter RS232/ RS422-485 24Vdc 132-037 40A 2 POLE 10kA MCB B CURVE 535-4194 40A SINGLE POLE TYPE C MCB

460-382 Converter RS232/ RS232 110/240Vac 703-5084 Three-phase monitoring relay CM-PVS 131-898 63A 2 POLE 10kA MCB B CURVE 535-4217 63A SINGLE POLE TYPE C MCB


inDuStRiAl CiRCuit PRoteCtion inDuStRiAl CiRCuit PRoteCtion

tyPe C DouBle Pole 10KA mCBS SuRGe PRoteCtion ovR SeRieS
• Type 'C' trip characteristic (5-10x nominal current rating) • Simple DIN rail mounting
• Complies with BS EN 60898 • IP20 Protection
• DIN rail mounting, standard 35mm width • Operating temperature range: -40°C → +80°C
• Max. operating voltage 440Vac

131-882 1A 2 POLE 10kA MCB C CURVE
701-8711 15kA Single Pole TNS , TNC
701-8720 15kA Single Pole TT 1Ph+N
701-8730 15kA Phase Cartridge , 275 V
701-8749 40kA Phase Cartridge , 275 V
701-8702 50kA 3 Ph+N TT Network


tyPe C mCB - 3Pole 10KA 701-8742 70kA Phase Cartridge , 275 V

701-8746 40kA 600V Device
• Type C characteristic offers short circuit response of 5-10 x normal rated current
701-8755 40kA 1000V Device
• For motor control and fluorescent lighting installations
701-8752 10kA 48V Single Pole , Low Current Unit
• Standard 52.5mm width






535-4223 1A TRIPLE POLE TYPE C MCB


e 90 FuSe DiSConneCtoRS otP PlAStiC enCloSeD SWitCh
535-4251
DiSConneCtoRS
6A TRIPLE POLE TYPE C MCB
• E 90 series fuse-disconnectors are designed
for connecting and disconnecting circuits under • Includes selector-type red-yellow handle (I-0 and ON-OFF indication)
load, providing protection against short circuits
• Threaded knock-out, compression glands have to be ordered separately
and overloads
535-4302 25A TRIPLE POLE TYPE C MCB • For easy and quick installation E 90 range is fully
535-4318 32A TRIPLE POLE TYPE C MCB compatible with connecting bars, terminals and
535-4324 40A TRIPLE POLE TYPE C MCB caps of S200 MCBs
535-4346 50A TRIPLE POLE TYPE C MCB • Poles: 1,2,3 and 4 plus also available with
Neutral switching; 1+ Neutral and 3 + Neutral
• E 90 fuse-disconnectors for 10.3 x 38 mm fuses
(AC-22B)

AuxiliARy SWitCh FoR S200, S 200 m SeRieS
• Integrated auxiliary switch for line safety switches
• Can be retrofitted below
• Contacts lead at switch-on and lag at switch-off
• NCC and NOC versions available 707-6146 Fuse Discconnector 1 pole 32A 690V

707-6158 Fuse Discconnector 2 pole 32A 690V

707-6152 Fuse Discconnector 3 pole 32A 690V

707-6164 Fuse Discconnector 4 pole 32A 690V 707-6127 Enclosed Sw/Discon 3 pole 16A

707-6155 Fuse Discconnector 1 pole + N 32A 690V 707-6133 Enclosed Sw/Discon 3 pole32A

707-6161 Fuse Discconnector 3 pole + N 32A 690V 707-6120 Enclosed Sw/Discon 4 pole16A

614-0845 auxiliary contact 1NC 707-6168 Fuse Discconnector 1 pole 32A 1000V dc 707-6124 Enclosed Sw/Discon 8 pole 16A

614-0851 auxiliary contact 1NO 707-6177 Fuse Discconnector 2 pole 32A1000V dc 707-6136 Enclosed Sw/Discon 8 pole 32A


GReen eneRGy GReen eneRGy

S800Pv-S mCB FoR PhotovoltAiC SyStemS tmAx Pv moulDeD CASe PhotovoltAiC PluGGABle oDinSinGle eleCtRiCity meteRS
• Optimum protection for PV system components, covers all common PV system CiRCuit BReAKeR SuRGe ARReSteRS • A Single Phase electricity meter for measuring currents up to 65A
voltages and currents • Tmax PV operating devices are the first molded case • Pluggable surge arresters that provide protection for • Nominal Voltage: 230Vac, 50/60Hz
• Minimised standstill times thanks to reclosing capability switches available on the market for the high DC equipment on photovoltaic systems, against transient over • DIN rail mounted
• High ambient temperatures voltages generated in Photovoltaic Arrays. voltages that occur on the electrical network • Backlit 6mm 6 Digit LCD display
• In operation worldwide in generator terminal boxes and inverters • Tmax PV makes it simple by using the same circuit • Often installed in sub-distribution boards using DIN rail. • Optional Communications Modules
breaker for both the DC and AC sides of the circuit • Standards: IEC 61643-1, EN 61643-11
• The Tmax PV equipment is IEC 60947-3 certified.
• Rated Voltage: 1100VDC
• Rated Current: 160 to 250A

707-6023 S 800 PV-S 2 pole 10A (800V dc) MCB 707-6203 Energy Meter 1P+N 65A Direct with reset

707-6032 S 800 PV-S 2 pole 16A (800V dc) MCB 707-6209 Energy Meter 1P+N 65A Direct Class B

707-6035 S 800 PV-S 2 pole 20A (800V dc) MCB


oDin eleCtRiCity meteR
707-6045 S 800 PV-S 2 pole 50A (800V dc) MCB • An electricity meter for measuring currents up to 65A
707-6048 S 800 PV-S 2 pole 32A (800V dc) MCB • Direct Connection, MID Class A
707-6051 S 800 PV-S 2 pole 100A (800V dc) MCB • Nominal Voltage: 3x230/400 V,
707-6054 S 800 PV-S 2 pole 63A (800V dc) MCB • DIN rail mounted
707-6057 S 800 PV-S 2 pole 80A (800V dc) MCB 707-6130 MCCB 4 pole (1100V dc) 160A • LCD with 7 digits
707-6170 Surge Device 600V No Indication
707-6060 S 800 PV-S 2 pole 125A (800V dc) MCB 707-6149 MCCB 4 pole (1100V dc) 200A • Pulse Output / IR Output
707-6174 Surge Device 600V with Indication
707-6142 • Phase indication and Load indicator
707-6063 S 800 PV-S 4 pole 10A (1200V dc) MCB MCCB 4 pole (1100V dc) 250A
707-6183 Surge Device1000V No Indication
707-6067 S 800 PV-S 4 pole 16A (1200V dc) MCB 707-6186 Surge Device1000V with Indication

ot non FuSiBle SWitCh
707-6079 S 800 PV-S 4 pole 25A (1200V dc) MCB DiSConneCtoRS F 200 A tyPe RCCBS
707-6082 S 800 PV-S 4 pole 40A (1200V dc) MCB • Front operated switch-disconnecto • Residual current protection devices specifically designed
707-6085 S 800 PV-S 4 pole 50A (1200V dc) MCB • Max Voltage 750Vdc, up to 8 poles for use in Photovoltaic systems
707-6089 S 800 PV-S 4 pole 63A (1200V dc) MCB • Current Rating: 16A to 32A • 300mA trip sensitivity
707-6091 S 800 PV-S 4 pole 100A (1200V dc) MCB • Cable Cross-Section: 0.75 to 10 mm² • Type 'A' AC detection, except 707-6206 which is type 'B'
707-6212 Energy Meter 3P+N 65A Direct Class A


DeltAPluS eleCtRiCity meteRS
S800Pv-m SWitCh • An electricity meter for measuring currents up to 80A
DiSConneCtoRS • Direct Connection, MID Class A and B Options
• Reliable isolation of up to 125 A rated • Nominal Voltage: 3x57-288 / 100-500V or 3x100-500V
current at ambient temperatures of up to • DIN rail mounted
60° C without any losses • LCD with 7 digits, height 7 mm
• Safe switching of ohmic and inductive • Pulse Output / IR Output
loads (inductive loads can occur with long • Read-outs available from DELTAplus meters:
line lengths) • - Power in kW
• Extensive range of accessories • - Current in A
• - Voltage in V
• - Frequency in Hz
• - Power factor

707-6102 S 800 PV-M 2pole 125A (800V dc) MCB

707-6105 S 800 PV-M 2pole 32A (800V dc) MCB 707-6180 RCD for PV 2 pole 40A 300mA

707-6108 S 800 PV-M 2pole 63A (800V dc) MCB 707-6221 Sw/Disconnector Solar 8 pole 16A 707-6192 RCD for PV 4 pole 40A 300mA

707-6111 S 800 PV-M 4pole 32A (1200V dc) MCB 707-6225 Sw/Discon Solar 8 pole 25A 707-6196 RCD for PV 4 pole 63A 300mA 707-6215 Energy Meter 3P+N 80A Class A, 3 x 57-288 / 100-500V

707-6114 S 800 PV-M 4pole 63A (1200V dc) MCB 707-6234 Sw/Discon Solar 8 pole 32A 707-6199 RCD for PV 2 pole 63A 300mA 707-6219 Energy Meter 3P+N 80A Class B, 3 x 57-288 / 100-500V

707-6118 S 800 PV-M 4pole 125A (1200V dc) MCB 707-6237 Sw/Discon Solar 4 pole 160A 707-6206 RCD for PV 4 pole 63A 300mA 707-6228 Energy Meter 3P+N 80A Class A, 3 x 100-500V


ABB Automation Solutions

More Related Content

Viewers also liked

Similar to ABB Automation Solutions

More from RSComponentsTCC

ABB Automation Solutions