Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
The installation of Helical Confinement in the Compression Zone of reinforced High Strength Concrete beams is also investigated in this study. Helical Confinement is more effective than the rectangular ties, Compression Longitudinal reinforcement and steel fibers in increasing the strength and ductility of Confined Concrete. A total number of 3 Specimens were casted. The Pitch distance for helical confinement of two specimens is 50mm, 60mm and the Pitch distance for normal confinement is 50mm. The Specimen is of a size of 600mm X 300mm X 300mm. It contains of 8 mm dia bar as longitudinal reinforcement and 6mm dia bar as transverse reinforcement. M 40 and Fe 500 Grade steels were used. After 28 Days of Curing. The Specimens were taken out and allowed to dry and tested under universal testing machine of capacity 1000 KN. The Effect of Yield strength ductility, were studied from Stress – Strain and Load – Displacement Curves. This Study Concluded the Helical Reinforcement is an effective method for increasing the Strength and Ductility of Reinforcement High Strength Concrete Beam.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Performance of Beam Incorporating with Locally Available ReinforcementQUESTJOURNAL
ABSTRACT : This study comparatively evaluated the flexural performance and deformation characteristics of concrete beams reinforced with bamboo, cane and the twisted steel rebar. The yield strength (YS), ultimate tensile strength (UTS) and the elongation of nine specimens of the three materials were determined using a universal testing machine. Nine beams of concrete strength 22 MPa at age 28 days were constructed separately reinforced with steel, bamboo, and cane bars, while the stirrups were steel bars. The beams were subjected to centre-point flexural loading according to ASTM C0293 to evaluate the flexural strength. The tensile strength of bamboo and rattan bars was 43% and 13% of that of steel in the same order. The elongation of bamboo, rattan and steel were 11.5%, 14% and 15.7% respectively. The experimental flexural strength of bamboo and cane reinforced concrete beams was 34% and 26% respectively of the conventional steel RC beams. The remarkable gap between the flexural capacities of the natural rebar and that of steel can be traced not only to the tensile strength but also the weak bonding at the bar-concrete interface. It can be concluded that the bamboo bars are suitable rebar for non-load bearing and lightweight RC flexural structures, while more pre-strengthening treatment is required more importantly for rattan for improved interfacial bonding and load-carrying capacity.
The installation of Helical Confinement in the Compression Zone of reinforced High Strength Concrete beams is also investigated in this study. Helical Confinement is more effective than the rectangular ties, Compression Longitudinal reinforcement and steel fibers in increasing the strength and ductility of Confined Concrete. A total number of 3 Specimens were casted. The Pitch distance for helical confinement of two specimens is 50mm, 60mm and the Pitch distance for normal confinement is 50mm. The Specimen is of a size of 600mm X 300mm X 300mm. It contains of 8 mm dia bar as longitudinal reinforcement and 6mm dia bar as transverse reinforcement. M 40 and Fe 500 Grade steels were used. After 28 Days of Curing. The Specimens were taken out and allowed to dry and tested under universal testing machine of capacity 1000 KN. The Effect of Yield strength ductility, were studied from Stress – Strain and Load – Displacement Curves. This Study Concluded the Helical Reinforcement is an effective method for increasing the Strength and Ductility of Reinforcement High Strength Concrete Beam.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Performance of Beam Incorporating with Locally Available ReinforcementQUESTJOURNAL
ABSTRACT : This study comparatively evaluated the flexural performance and deformation characteristics of concrete beams reinforced with bamboo, cane and the twisted steel rebar. The yield strength (YS), ultimate tensile strength (UTS) and the elongation of nine specimens of the three materials were determined using a universal testing machine. Nine beams of concrete strength 22 MPa at age 28 days were constructed separately reinforced with steel, bamboo, and cane bars, while the stirrups were steel bars. The beams were subjected to centre-point flexural loading according to ASTM C0293 to evaluate the flexural strength. The tensile strength of bamboo and rattan bars was 43% and 13% of that of steel in the same order. The elongation of bamboo, rattan and steel were 11.5%, 14% and 15.7% respectively. The experimental flexural strength of bamboo and cane reinforced concrete beams was 34% and 26% respectively of the conventional steel RC beams. The remarkable gap between the flexural capacities of the natural rebar and that of steel can be traced not only to the tensile strength but also the weak bonding at the bar-concrete interface. It can be concluded that the bamboo bars are suitable rebar for non-load bearing and lightweight RC flexural structures, while more pre-strengthening treatment is required more importantly for rattan for improved interfacial bonding and load-carrying capacity.
This project discusses with Basalt fiber reinforced concrete. And the report present the art of knowledge of basalt fiber, it is relatively new material Basalt is an igneous rock. Basalt fiber reinforced concrete offers more characteristics such as lightweight and good fire resistance and strength. In future it is very beneficial for construction industry. Many applications of basalt fiber are residential industrial, highway and bridges. The information in this report has been compiled from reports of test programs by various researchers and represents current opinion.
The idea of using bamboo as possible reinforcement has gained popularity. Bamboo, as a fast growing renewable material with a simple production process, is expected to be a sustainable alternative for more traditional structural materials, such as concrete, steel and timber. The diminishing wood resource and reduction in natural forests, particularly in the tropics, have focused world attention on the need to identify a substitute building material that should be renewable, environment friendly and widely available. The tensile strength of bamboo fiber can be comparable to that of steel, and the average fracture toughness of bamboo can be higher than that of aluminum alloy. Bamboo grows at rapid rates, it almost grows to its full size in a few months and finishes developing within five years. Bamboo is the world’s fastest growing woody plant. It grows approximately 7.5 to 40cm a day, with world record being 1.2m in 24 hours in Japan. Bamboo grows three times faster than most other species. Commercially important species of bamboo usually mature in four or five years in time.
Performance of Self Compacting High Strength Fiber Reinforced Concrete (SCHSFRC)IOSR Journals
In this experimental study the changes on some mechanical properties of self compacting concrete
specimen produced by silica fume, metakaolin, fly ash and steel fibers were investigated. The main objective of
this is to obtain ductile Self Compacting High Strength Concrete (SCHSC) which flows under its own weight
and homogeneity while completely filling any formwork and passing around congested reinforcement. The Self
Compacting High Strength Concrete produced by using silica fume, metakaolin, fly ash, steel fibers and
Polycarboxylatether base superplasticizer. Three types of steel fibers were used in the experiments and volume
fractions of steel fiber were 0.5% to 4.0 %. Addition of silica fume, metakaolin and fly ash into the concrete
were 2.5 %, 2.5 % and 10 % by weight of cement content respectively. Water/cement ratio was 0.29.
Compressive strength and split tensile strength tests were made on hardened concrete specimens.
The installation of Helical Confinement in the Compression Zone of reinforced High Strength Concrete beams is also investigated in this study. Helical Confinement is more effective than the rectangular ties, Compression Longitudinal reinforcement and steel fibers in increasing the strength and ductility of Confined Concrete. A total number of 3 Specimens were casted. The Pitch distance for helical confinement of two specimens is 50mm, 60mm and the Pitch distance for normal confinement is 50mm. The Specimen is of a size of 600mm X 300mm X 300mm. It contains of 8 mm dia bar as longitudinal reinforcement and 6mm dia bar as transverse reinforcement. M 40 and Fe 500 Grade steels were used. After 28 Days of Curing. The Specimens were taken out and allowed to dry and tested under universal testing machine of capacity 1000 KN. The Effect of Yield strength ductility, were studied from Stress – Strain and Load – Displacement Curves. This Study Concluded the Helical Reinforcement is an effective method for increasing the Strength and Ductility of Reinforcement High Strength Concrete Beam.
A Study on Effect of Sizes of aggregates on Steel Fiber Reinforced ConcreteIJERD Editor
Plain, unreinforced concrete is a brittle material, with a low tensile strength, limited ductility and
little resistance to cracking. In order to improve the inherent tensile strength of concrete there is a need of
multidirectional and closely spaced reinforcement, which can be provided in the form of randomly distributed
fibers. Steel fiber is one of the most commonly used fibers The present experimental study considers the effect
of aggregate size and steel fibers on the modulus of elasticity of concrete. Crimped steel fibers at volume
fraction of 0%.0.5%, 1.0% and 1.5% were used. Study on effect of volume fraction of fibers and change of
aggregate size on the modulus of elasticity of concrete was also deemed as an important part of present
experimental investigation. This work aims in studying the mechanical behavior of concrete in terms of modulus
of elasticity with the change of aggregate size reinforced with steel fibers of different series for M30 and M50
grade concretes. The results obtained show that the addition of steel fiber improves the modulus of elasticity of
concrete. It was also analyzed that by increasing the fiber volume fraction from 0%, to 1.5% there was a healthy
effect on modulus of elasticity of Steel Fiber Reinforced concrete.
Punching Shear Strength of High Strength Fibre Reinforced Concrete SlabsIJMER
The experimental study of punching shear behavior of High Strength fiber reinforced
concrete slabs is carried out in the present work. Each of 24 square slabs was simply supported along
four edges and loaded to failure under a concentrated load over a square area at the center. The test
parameters were the effective span to depth aid ratio, volume fraction of 3 types of steel fibers, slab
thickness h, concrete strength fck, and size of load-bearing plate r. Test results indicate that the load
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Flexural characteristics of sfrscc and sfrnc one way slabseSAT Journals
Abstract Fibre reinforced concrete with steel fibres attracted the attention of engineers and researchers during the last five decades. In recent times self-compacting concrete has been accepted as a quality product and are widely used. A large number of studies are available with respect to several parameters viz., load deflection behavior, toughness, flexural strength, ductility, effects of beam dimensions, concrete filling sequence, flexural toughness parameters, crack control etc. of fibre Reinforced Concrete. The present study aims to study the flexural behavior of SFRSCC and SFRNC slabs with steel fibres. Keywords: Self compacting concrete1, Fibre reinforced concrete2, Steel fibre reinforce normal concrete3, Steel fibre reinforce4, Self-compacting concrete5.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Reuse of Lathe Waste Steel Scrap in Concrete PavementsIJERA Editor
These project works assess on the study of the workability and mechanical strength properties of the concrete reinforced with industrialized waste fibers or the recycled fibers. In each lathe industries wastes are available in form of steel scraps are yield by the lathe machines in process of finishing of different machines parts and dumping of these wastes in the barren soil contaminating the soil and ground water that builds an unhealthy environment. Now a day’s these steel scraps as a waste products used by innovative construction industry and also in transportation and highway industry. In addition to get sustainable progress and environmental remuneration, lathe scrap as worn-recycle fibers with concrete are likely to be used. When the steel scrap reinforced in concrete it acquire a term; fiber reinforced concrete and steel fibers in concrete defined as steel fiber reinforced concrete (SFRC).Different experimental studies are done to identify about fresh and hardened concrete properties of steel scrap fiber reinforced concrete (SSFRC) and their mechanical properties are found to be increase due to the addition of steel scrap in concrete i.e. compressive strength, flexural strength, impact strength, fatigue strength and split tensile strength were increased but up to 0.5-2% scrap content . When compared with usual concrete to SSFRC, flexural strength increases by 40% and considerable increases in tensile and compressive strength. These steel scrap also aid to improve the shrinkage reduction, cracking resistance i.e. preventing crack propagation and modulus of elasticity. The workability of fresh SSFRC are carried out by using slump test but it restricted to less scrap contents. This work focuses on the enhancement of structural strength and improvement in fatigue life of concrete pavements by reuse of scrap steel in concrete. These concrete roads with SSFRC promises an appreciably eminent design life, offer superior serviceability and minimize crack growth and corrosion. The pioneer idea of this work is the reuse of waste lathe scrap as recycled steel fibers, which provides more cost-effective and eco-friendly sustainable SFRC PAVEMENTS.
BEHAVIOR OF HIGH STRENGTH FIBER REINFORCED CONCRETE UNDER SHEAR IAEME Publication
This paper assesses the effectiveness of steel fibers used along with the shear reinforcement in the formation of the high grade fiber reinforced concrete. Shear strength of concrete is obtained from direct shear test using push off specimens. Shear stress (strength) is calculated as a ratio of load
to the area of shear plane. Tests were carried out on the “Push-Off” (double L) type specimens in triplicates to determine the Shear strength. The effects of these fibers with different volume of fibers on work ability, density, and on shear strengths of M60 grade concrete are studied. New expressions
for shear strengths are proposed. The specimen was designed to fail in shear at a known plane.
Performance evaluation of hybrid fibre reinforced concrete subjected to freez...eSAT Journals
Abstract Durability is the ability to last a long time without significant deterioration. Hybrid fiber reinforced concrete (HFRC) proves to be durable material, which is effective in resisting the damage caused due to freezing and thawing due to synergistic performance of hybrid fibers. The objectives of the work described in this paper were aimed at comparing the relative strength of Hybrid fiber reinforced concrete (HFRC) with that of mono fiber reinforced concrete (FRC) and plain concrete without fibers (ref. mix) subjected to freezing and thawing. The combination of fibers used in the experimentation are (Steel + Polypropylene),(Steel +Galvanized Iron),(Steel + High density polyethylene).Strength parameters considered are compressive strength, split tensile strength, flexural strength and impact strength and tested as per relevant IS specifications. It has been concluded that the performance of hybrid fibers in concrete is better than that of mono fiber concrete for improved durability in resisting the destructive effect of freezing and thawing and also for strength enhancement. Keywords: Fiber reinforced concrete, hybrid fiber reinforced concrete, freezing and thawing, frost action, synergic effect.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
THIS WAS THE PROJECT CARRIED OUT BY OUR TEAM AS A FINAL YEAR PROJECT. IN THIS PROJECT STEEL FIBERS WAS INDUCED ALONG WITH CEMENT MATRIX TO INCREASE THE DURABILITY, CRACK RESISTANCE AND FLEXURAL STRENGTH OF FERROCEMENT BLOCKS. THESE BLOCKS HAS MORE LATERAL STABILITY THAN ORDINARY BRICKS
Experimental study on behaviour of concrete using steel fiber as a tensile ma...KavinKumarR3
Concrete is widely used in all over the world. It gives a compression strength and when it is collaborate with the steel the tension strength is increased. Traditional reinforcement will takes time. So by using the steel fibers in the concrete it will gives the high strength and durability. The fiber will leads to compensate the weakness in the concrete. Steel fiber reinforced concrete (SFRC) is successfully used in the slabs, flooring, and even in beams. The formation has proved the high tensile strength when it added in the concrete.
This project discusses with Basalt fiber reinforced concrete. And the report present the art of knowledge of basalt fiber, it is relatively new material Basalt is an igneous rock. Basalt fiber reinforced concrete offers more characteristics such as lightweight and good fire resistance and strength. In future it is very beneficial for construction industry. Many applications of basalt fiber are residential industrial, highway and bridges. The information in this report has been compiled from reports of test programs by various researchers and represents current opinion.
The idea of using bamboo as possible reinforcement has gained popularity. Bamboo, as a fast growing renewable material with a simple production process, is expected to be a sustainable alternative for more traditional structural materials, such as concrete, steel and timber. The diminishing wood resource and reduction in natural forests, particularly in the tropics, have focused world attention on the need to identify a substitute building material that should be renewable, environment friendly and widely available. The tensile strength of bamboo fiber can be comparable to that of steel, and the average fracture toughness of bamboo can be higher than that of aluminum alloy. Bamboo grows at rapid rates, it almost grows to its full size in a few months and finishes developing within five years. Bamboo is the world’s fastest growing woody plant. It grows approximately 7.5 to 40cm a day, with world record being 1.2m in 24 hours in Japan. Bamboo grows three times faster than most other species. Commercially important species of bamboo usually mature in four or five years in time.
Performance of Self Compacting High Strength Fiber Reinforced Concrete (SCHSFRC)IOSR Journals
In this experimental study the changes on some mechanical properties of self compacting concrete
specimen produced by silica fume, metakaolin, fly ash and steel fibers were investigated. The main objective of
this is to obtain ductile Self Compacting High Strength Concrete (SCHSC) which flows under its own weight
and homogeneity while completely filling any formwork and passing around congested reinforcement. The Self
Compacting High Strength Concrete produced by using silica fume, metakaolin, fly ash, steel fibers and
Polycarboxylatether base superplasticizer. Three types of steel fibers were used in the experiments and volume
fractions of steel fiber were 0.5% to 4.0 %. Addition of silica fume, metakaolin and fly ash into the concrete
were 2.5 %, 2.5 % and 10 % by weight of cement content respectively. Water/cement ratio was 0.29.
Compressive strength and split tensile strength tests were made on hardened concrete specimens.
The installation of Helical Confinement in the Compression Zone of reinforced High Strength Concrete beams is also investigated in this study. Helical Confinement is more effective than the rectangular ties, Compression Longitudinal reinforcement and steel fibers in increasing the strength and ductility of Confined Concrete. A total number of 3 Specimens were casted. The Pitch distance for helical confinement of two specimens is 50mm, 60mm and the Pitch distance for normal confinement is 50mm. The Specimen is of a size of 600mm X 300mm X 300mm. It contains of 8 mm dia bar as longitudinal reinforcement and 6mm dia bar as transverse reinforcement. M 40 and Fe 500 Grade steels were used. After 28 Days of Curing. The Specimens were taken out and allowed to dry and tested under universal testing machine of capacity 1000 KN. The Effect of Yield strength ductility, were studied from Stress – Strain and Load – Displacement Curves. This Study Concluded the Helical Reinforcement is an effective method for increasing the Strength and Ductility of Reinforcement High Strength Concrete Beam.
A Study on Effect of Sizes of aggregates on Steel Fiber Reinforced ConcreteIJERD Editor
Plain, unreinforced concrete is a brittle material, with a low tensile strength, limited ductility and
little resistance to cracking. In order to improve the inherent tensile strength of concrete there is a need of
multidirectional and closely spaced reinforcement, which can be provided in the form of randomly distributed
fibers. Steel fiber is one of the most commonly used fibers The present experimental study considers the effect
of aggregate size and steel fibers on the modulus of elasticity of concrete. Crimped steel fibers at volume
fraction of 0%.0.5%, 1.0% and 1.5% were used. Study on effect of volume fraction of fibers and change of
aggregate size on the modulus of elasticity of concrete was also deemed as an important part of present
experimental investigation. This work aims in studying the mechanical behavior of concrete in terms of modulus
of elasticity with the change of aggregate size reinforced with steel fibers of different series for M30 and M50
grade concretes. The results obtained show that the addition of steel fiber improves the modulus of elasticity of
concrete. It was also analyzed that by increasing the fiber volume fraction from 0%, to 1.5% there was a healthy
effect on modulus of elasticity of Steel Fiber Reinforced concrete.
Punching Shear Strength of High Strength Fibre Reinforced Concrete SlabsIJMER
The experimental study of punching shear behavior of High Strength fiber reinforced
concrete slabs is carried out in the present work. Each of 24 square slabs was simply supported along
four edges and loaded to failure under a concentrated load over a square area at the center. The test
parameters were the effective span to depth aid ratio, volume fraction of 3 types of steel fibers, slab
thickness h, concrete strength fck, and size of load-bearing plate r. Test results indicate that the load
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Flexural characteristics of sfrscc and sfrnc one way slabseSAT Journals
Abstract Fibre reinforced concrete with steel fibres attracted the attention of engineers and researchers during the last five decades. In recent times self-compacting concrete has been accepted as a quality product and are widely used. A large number of studies are available with respect to several parameters viz., load deflection behavior, toughness, flexural strength, ductility, effects of beam dimensions, concrete filling sequence, flexural toughness parameters, crack control etc. of fibre Reinforced Concrete. The present study aims to study the flexural behavior of SFRSCC and SFRNC slabs with steel fibres. Keywords: Self compacting concrete1, Fibre reinforced concrete2, Steel fibre reinforce normal concrete3, Steel fibre reinforce4, Self-compacting concrete5.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Reuse of Lathe Waste Steel Scrap in Concrete PavementsIJERA Editor
These project works assess on the study of the workability and mechanical strength properties of the concrete reinforced with industrialized waste fibers or the recycled fibers. In each lathe industries wastes are available in form of steel scraps are yield by the lathe machines in process of finishing of different machines parts and dumping of these wastes in the barren soil contaminating the soil and ground water that builds an unhealthy environment. Now a day’s these steel scraps as a waste products used by innovative construction industry and also in transportation and highway industry. In addition to get sustainable progress and environmental remuneration, lathe scrap as worn-recycle fibers with concrete are likely to be used. When the steel scrap reinforced in concrete it acquire a term; fiber reinforced concrete and steel fibers in concrete defined as steel fiber reinforced concrete (SFRC).Different experimental studies are done to identify about fresh and hardened concrete properties of steel scrap fiber reinforced concrete (SSFRC) and their mechanical properties are found to be increase due to the addition of steel scrap in concrete i.e. compressive strength, flexural strength, impact strength, fatigue strength and split tensile strength were increased but up to 0.5-2% scrap content . When compared with usual concrete to SSFRC, flexural strength increases by 40% and considerable increases in tensile and compressive strength. These steel scrap also aid to improve the shrinkage reduction, cracking resistance i.e. preventing crack propagation and modulus of elasticity. The workability of fresh SSFRC are carried out by using slump test but it restricted to less scrap contents. This work focuses on the enhancement of structural strength and improvement in fatigue life of concrete pavements by reuse of scrap steel in concrete. These concrete roads with SSFRC promises an appreciably eminent design life, offer superior serviceability and minimize crack growth and corrosion. The pioneer idea of this work is the reuse of waste lathe scrap as recycled steel fibers, which provides more cost-effective and eco-friendly sustainable SFRC PAVEMENTS.
BEHAVIOR OF HIGH STRENGTH FIBER REINFORCED CONCRETE UNDER SHEAR IAEME Publication
This paper assesses the effectiveness of steel fibers used along with the shear reinforcement in the formation of the high grade fiber reinforced concrete. Shear strength of concrete is obtained from direct shear test using push off specimens. Shear stress (strength) is calculated as a ratio of load
to the area of shear plane. Tests were carried out on the “Push-Off” (double L) type specimens in triplicates to determine the Shear strength. The effects of these fibers with different volume of fibers on work ability, density, and on shear strengths of M60 grade concrete are studied. New expressions
for shear strengths are proposed. The specimen was designed to fail in shear at a known plane.
Performance evaluation of hybrid fibre reinforced concrete subjected to freez...eSAT Journals
Abstract Durability is the ability to last a long time without significant deterioration. Hybrid fiber reinforced concrete (HFRC) proves to be durable material, which is effective in resisting the damage caused due to freezing and thawing due to synergistic performance of hybrid fibers. The objectives of the work described in this paper were aimed at comparing the relative strength of Hybrid fiber reinforced concrete (HFRC) with that of mono fiber reinforced concrete (FRC) and plain concrete without fibers (ref. mix) subjected to freezing and thawing. The combination of fibers used in the experimentation are (Steel + Polypropylene),(Steel +Galvanized Iron),(Steel + High density polyethylene).Strength parameters considered are compressive strength, split tensile strength, flexural strength and impact strength and tested as per relevant IS specifications. It has been concluded that the performance of hybrid fibers in concrete is better than that of mono fiber concrete for improved durability in resisting the destructive effect of freezing and thawing and also for strength enhancement. Keywords: Fiber reinforced concrete, hybrid fiber reinforced concrete, freezing and thawing, frost action, synergic effect.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
THIS WAS THE PROJECT CARRIED OUT BY OUR TEAM AS A FINAL YEAR PROJECT. IN THIS PROJECT STEEL FIBERS WAS INDUCED ALONG WITH CEMENT MATRIX TO INCREASE THE DURABILITY, CRACK RESISTANCE AND FLEXURAL STRENGTH OF FERROCEMENT BLOCKS. THESE BLOCKS HAS MORE LATERAL STABILITY THAN ORDINARY BRICKS
Experimental study on behaviour of concrete using steel fiber as a tensile ma...KavinKumarR3
Concrete is widely used in all over the world. It gives a compression strength and when it is collaborate with the steel the tension strength is increased. Traditional reinforcement will takes time. So by using the steel fibers in the concrete it will gives the high strength and durability. The fiber will leads to compensate the weakness in the concrete. Steel fiber reinforced concrete (SFRC) is successfully used in the slabs, flooring, and even in beams. The formation has proved the high tensile strength when it added in the concrete.
Concrete made with Portland cement has certain characteristics: it is relatively strong in compression but weak
in tension and tends to be brittle. These two weaknesses have limited its use. Another fundamental weakness of
concrete is that cracks start to form as soon as concrete is placed and before it has properly hardened. These
cracks are major cause of weakness in concrete particularly in large on site applications leading to subsequent
fracture and failure and general lack of durability
A Study on Concrete Using Bottom Ash, Manufacturing Sand and Hybrid Steel and...IOSR Journals
This study in concrete is to study about hybrid combination of fibers such as corrugated steel and coir on the mechanical properties and concrete. From the compressive strength test and split tensile test carried out on 3Nos of cube and cylinder for each trial, it was observed that compared to control mix, compressive strength increases. The increase may be due to increased availability of fibers at the micro-cracks, increase in pull out strength due to bending and warpness of fibers and improvement in bond between fiber and matrix at the interface. The presence of steel fibers in hybrid combination with coir fiber has improved post-cracking behavior of the beam specimens
Concrete is characterized by brittle failure. It can be
overcome by the inclusion of a small amount of short
randomly distributed fibers.. Here steel fiber is used to overcome brittle failure and also it can give more strength to the concrete...
Behaviour of Steel Fibre Reinforced Concrete Beam under Cyclic LoadingIOSR Journals
Abstract: This paper describes the influence of steel fibre distribution on the ultimate strength of concrete
beams. An experimental & analytical investigation of the behaviour of concrete beams reinforced with
conventional steel bars and steel fibres under cyclic loading is presented. It is now well established that one of
the important properties of steel fibre reinforced concrete (SFRC) is its superior resistance to cracking and
crack propagation. As a result of this ability to arrest cracks, fibre composites possess increased extensibility
and tensile strength, both at first crack and at ultimate load and the fibres are able to hold the matrix together
even after extensive cracking. The net result of all these is to impart to the fibre composite pronounced post –
cracking ductility which is unheard of in ordinary concrete. The transformation from a brittle to a ductile type
of material would increase substantially the energy absorption characteristics of the fibre composite and its
ability to withstand repeatedly applied, shock or impact loading. Tests on conventionally reinforced concrete
beam specimens, containing steel fibres in different proportions, have been conducted to establish loaddeflection
curves. It was observed that SFRC beams showed enhanced properties compared to that of RC beams
with steel fibres. The experimental investigations are validated with the analytical studies carried out by finite
element models using ANSYS.
Keywords: Steel fiber, concrete, properties, crack, ductility, technology.
IRJET - Study on Workability and Compressive Strength of Concrete Blended...
Research Inventy : International Journal of Engineering and Science
1. RESEARCH INVENTY: International Journal of Engineering and Science
ISSN: 2278-4721, Vol. 1, Issue 12 (December 2012), PP 01-04
www.researchinventy.com
Performance of Steel Fiber Reinforced Concrete
1,
Milind V. Mohod,
1,
Assistant Professor, Department of Civil Engineering,
P.R.M.I.T.&R., Badnera.
Abstract:
Cement concrete is the most extensively used construction material in the world. The reason for its
extensive use is that it provides good workability and can be moulded to any shape. Ordinary cement concrete
possesses a very low tensile strength, limited ductility and little resistance to cracking. Internal micro cracks,
leading to brittle failure of concrete. In this modern age, civil engineering constructions have their own
structural and durability requirements, every structure has its own intended purpose and hence to meet this
purpose, modification in traditional cement concrete has become mandatory. It has been found that different
type of fibers added in specific percentage to concrete improves the mechanical properties, durability and
serviceability of the structure. It is now established that one of the important properties of Steel Fiber
Reinforced Concrete (SFRC) is its superior resistance to cracking and crack propagation. In this paper effect of
fibers on the strength of concrete for M 30 grade have been studied by varying the percentage of fibers in
concrete. Fiber content were varied by 0.25%, 0.50%, 0.75%, 1%, 1.5% and 2% by volume of cement. Cubes of
size 150mmX150mmX150mm to check the compressive strength and beams of size 500mmX100mmX100mm for
checking flexural strength were casted. All the specimens were cured for the period of 3, 7 and 28 days before
crushing. The results of fiber reinforced concrete for 3days, 7days and 28days curing with varied percentage of
fiber were studied and it has been found that there is significant strength improvement in steel fiber reinforced
concrete. The optimum fiber content while studying the compressive strength of cube is found to be 1% and
0.75% for flexural strength of the beam. Also, it has been observed that with the increase in fiber content up to
the optimum value increases the strength of concrete. Slump cone test was adopted to measure the workability
of concrete. The Slump cone test results revealed that workability gets reduced with the increase in fiber
content.
Keywords: Compressive strength, Flexural strength, Hooked end steel fiber, Optimum Value, Steel fiber
reinforced concrete, Workability.
I. Introduction
Steel Fibre reinforced concrete (SFRC) is defined as concrete made with hydraulic cement containing
Fine and coarse aggregate and discontinuous discrete fibre. In SFRC, thousands of small fibres are dispersed
and distributed randomly in the concrete during mixing, and thus improve concrete properties. SFRC is being
increasingly used to improve static and dynamic tensile strength, energy absorbing capacity and better fatigue
strength. . Janesan, P. V. Indira and S. Rajendra Prasad [1] reported the effect of steel fibre on the strength and
behaviour of reinforced concrete is two-way action. They concluded that the addition of steel fibre increases the
ultimate strength and ductility.The plain structure cracks into two pieces when the structure is subjected to the
peak tensile load and cannot withstand further load or deformation. Steel fibres are generally used to enhance
the tensile strength and ductility of concrete. As stated in ACI 544, 3R-08 [2] , fibre volume fraction used in
producing steel fibre reinforced concrete should be within 0.5% to 1.5% as the addition of fibre may reduce the
workability of the mix and will cause balling or mat which will be extremely difficult to separate by vibration.
However higher percentage of fibre can be used with special fibre adding techniques and also placement
procedures. According to ACI 544, 3R-08 [2], aspect ratio is referred to the ratio of fibre length over the
diameter. The normal range of aspect ratio for steel fibre is from 20 to 100. Aspect ratio of steel fibre greater
than 100 is not recommended, as it will cause inadequate workability, formation of mat in the mix and also non
uniform distribution of fibre in the mix. To avoid any honeycombing, bleeding, segregation and heterogeneous
features by improving the workability, use less water and paste. Rui D. Neves and Joao C. O. Fernandes de
Almeida [3] varied the percentage of volume of fibre in the concrete up to 1.5%. There results indicates that the
addition fibres to concrete enhances its toughness and strength and peak stress, but can slightly reduced young’s
modulus. Generally, for structural applications, steel fibres should be used in a role supplementary to
reinforcing bars. Steel fibres can reliably inhibit cracking and improve resistance to material deterioration as a
result of fatigue, impact, and shrinkage, or thermal stresses. A conservative but justifiable approach in structural
members where flexural or tensile loads occur, such as in beams, columns, or elevated slabs (i.e., roofs, floors,
1
2. Performance Of Steel Fiber Reinforced Concrete
or slabs not on grade), is that reinforcing bars must be used to support the total tensile load. This is
because the variability of fibre distribution may be such that low fibre content in critical areas could lead to
unacceptable reduction in strength. In applications where the presence of continuous reinforcement is not
essential to the safety and integrity of the structure, e.g., floors on grade, pavements, overlays, and shotcrete
linings, the improvements in flexural strength, impact resistance, and fatigue performance associated with the
fibres can be used to reduce section thickness, improve performance, or both.
II. Methodology:
Ordinary Portland cement of 53 grade was used. The coarse aggregates used were crushed aggregate
passing through 20 mm sieve size and retaining on 4.75 mm sieve size. The fine aggregate used was uncrushed
sand. The mix design was confirming to IS 10262:2009. Water cement ratio of 0.45 was adopted. Throughout
the test the concrete used was M30 grade and end hooked steel fibre have been used.
60 mm
(a)
2.5 mm 3mm
(b)
Fig. No. 1 Dimensions of the DRAMIX ZC 60/.80 fiber and its end part
III. Results And Discussion:
Effect of steel fibre reinforcement for studying the parameters of SFRC, like cube compressive strength
and flexural strength, cubes and beams were casted and tested. The effect of increase in steel fiber percentage by
volume of cement were studied. Workability of steel fiber reinforced concrete mix was observed by the slump
cone test. The observation for 3, 7 and 28 days curing period were recorded and presented in the form of tables
and graphs.
1) The compressive strength was calculated as follows:
Compressive strength (MPa) = Failure load / cross sectional area.
2) The flexural strength was calculated as follows:
Flexural strength (MPa) = (P x L x 6) / (4 x b x (d*d)) (1)
Where, P= Failure Load, L= Center to center distance between the supports= L=400mm,
b= Width of specimen= 100mm, d= depth of specimen=100 mm.
Fig. No. 2 Variation of Compressive strength with respect to % of fiber content
2
3. Performance Of Steel Fiber Reinforced Concrete
Fig. No. 3 Variation of Flexural strength with respect to % of fiber content
Fig. No. 4 Variation in Slump of concrete with respect to % of fiber content
1. Conclusions:
Following conclusions were drawn from the work carried out;
1) It is observed that the workability of steel fibre reinforced concrete gets reduced as the percentage of
steel fibres increases.
2) Compressive strength goes on increasing by increase in steel fibre percentage up to the optimum value.
The optimum value of fibre content of steel fibre reinforced concrete was found to be 1%.
3) The flexural strength of concrete goes on increasing with the increase in fibre content up to the
optimum value. The optimum value for flexural strength of steel fibre reinforced cement concrete was
found to be 0.75%.
4) While testing the specimens, the plain cement concrete specimens have shown a typical crack
propagation pattern which leaded into splitting of beam in two piece geometry. But due to addition of
steel fibres in concrete cracks gets ceased which results into the ductile behaviour of SFRC.
3
4. Performance Of Steel Fiber Reinforced Concrete
References:
[1]. ACI committee 544, 3R-08, 2008. “Guide for specifying, proportioning, and production of fibre reinforced concrete.” American
concrete institute, Farmington hills, USA.
[2]. N. Janesan, P. V. Indira and S. Rajendra Prasad, 2010: “Structural behaviour of steel fibre reinforced concrete wall panels in two-
way is plane action.” Indian concrete journal.
[3]. Rui D. Neves and Joao C. O. Fernandes de Almeida, 2005. “Compressive behaviour of steel fibre reinforced concrete”, structural
concrete. 2005-06. No. 1.
[4]. Indian standard code of practice for specification for coarse and fine aggregate from natural sources for concrete, IS 383: (1970),
Bureau of Indian standards, New Delhi.
[5]. Indian standard code of practice for recommended guidelines for concrete mix design, IS 10262: 2009, Bureau of Indian standar ds,
New Delhi.
[6]. Indian standard code of practice for plain and reinforced concrete IS 456: 2000, Bureau of Indian standards, New Delhi.
IMAGE CALLERY:
1) STEEL FIBRE REINFORCED CONCRETE
2) CRACK OBSERVED IN SPECIMEN
4