Do you want to know about the Bureau of Indian Standards (BIS)? So Here ASC Group Shares a Detailed Analysis of BIS. Read it.

1. Bureau of Indian Standards
(BIS)

2. INDEX
Since 1995
01 What is BIS? 02 Genesis of BIS
05 Compulsory Registration
Scheme (CRS)
04 BIS Certifications
08
Product Certification
Scheme (For Domestic
Manufacturers only)
03 Objectives
07 Procedure for Grant of
License under FMCS
09
Normal Process of ISI
Registration
10 Simplified Process for
Grant of License
06
Product Certification
Scheme (ISI Mark)
11 Factory Inspection Highlights 12 Contact

3. BIS is the National Standard Body of India established under the
BIS Act 2016 for the harmonious development of the activities of
standardization, marking and quality certification of goods and
for matters connected therewith or incidental thereto.
BIS has been providing traceability and tangibility benefits to the
national economy in a number of ways i.e.,–
▪ providing safe reliable quality goods;
▪ minimizing health hazards to consumers;
▪ promoting exports and imports substitute;
▪ control over proliferation of varieties etc. through
standardization, certification and testing.
Since 1995
01 What is BIS?

4. • Government of India resolution on 3 September 1946 for establishment of Indian
Standards Institution
• Indian Standards Institution (predecessor of Bureau of Indian Standards)set up on 6
January 1947
• Bureau of Indian Standards (BIS)
❖ Established on 1 April 1987 under BIS act, 1986 as statutory body
❖ Bureau of Indian Standards (BIS) took over work of ISI through enactment of BIS
Act (1986) by the Indian Parliament.
❖ Formulates National standards and carried out conformity assessment by
operating the Product and Management System Certification Scheme.
❖ Formulated over 18000 National Standards and also operating more than 22000
Certification licenses.
❖ Project India’s view in various committees of International Organization for
Standardization (ISO) and International Electrotechnical Commission (IEC)
02 Genesis of BIS
Since 1995

5. • Harmonious development of activities of standardization, marking
and quality certification
• To provide new thrust to standardization and quality control
• To evolve a national strategy for according recognition to
standards and integrating them with growth and development of
industrial production and exports
• Promoting standardization ,quality control and simplification in
industry & commerce
Since 1995
03 Objectives

6. 04 BIS Certification
Since 1995
Bureau of
Indian
Standards
{BIS}
Compulsory Registration
Scheme(CRS)
Product Certification Scheme (ISI Mark)

7. • Ministry of Electronics & Information Technology (MeitY)
(erstwhile DeitY) has notified "Electronics and Information
Technology Goods (Requirement for Compulsory Registration)
Order, 2012" on 03 October 2012 for fifteen categories of
electronics items.
• Bureau of Indian Standards grants license to the manufacturers
to use or apply Standard Mark with unique R-number, through
registration based on self-declaration of conformity for goods
and articles as per Indian Standards.
• The grant of license and its operation under Compulsory
Registration Scheme are carried out as per the conformity
assessment scheme under Scheme - II of
• Schedule - II of BIS (Conformity Assessment) Regulations, 2018'.
05 Compulsory Registration Scheme
(CRS)
Since 1995

8. Manufacturer (factory owner) of any product, which comes under the
ambit of the Compulsory Registration Order (CRO) notified by
Ministry of Electronics and Information Technology (MeitY)
At present we have a total of 79 Products which fall
under CRS. You can check the product list here:
https://www.crsbis.in/BIS/products-bis.do
Who can apply for Compulsory Registration Scheme
(CRS)
Since 1995
05 Compulsory Registration Scheme
(CRS)

9. 06 Product Certification Scheme (ISI Mark)
• BIS has been operating a separate scheme named as FMCS
(Foreign Manufacturer Certification Scheme) for foreign
manufacturers since 2000.
• Under this scheme (Scheme-I of Schedule-II), foreign
manufacturers can seek certification from BIS for use of
Standard Mark (commonly known as ISI Mark) on their products.
• The aim of this scheme is to provide third-party guarantee of
quality, safety and reliability of products to the end customer and
broadly applicable for grant of license for all the products except
Electronics & IT Goods notified by MeitY.
• Many products like electrical appliances, kitchen accessories,
industrial products, steel products, toys, chemicals, Petro-
chemicals and automobile accessories are mandatorily required to
be registered under this order. Post registration, applicant will be
eligible to put the ISI Mark on their desired products.
Since 1995

10. Manufacturers (who is actually producing the goods) having their company outside India can apply for FMCS license.
The company shall ensure below listed points before applying for said license:
1. Conformation of their product according to suitable Indian Standard
2. Have complete in-house manufacturing facility at the factory location.
3. Have complete in-house testing facility against the particular Indian Standard for which applicant would like to
apply to obtain ISI Mark. Outsourcing is allowed up to some extent
4. Have qualified & competent quality control staff in the manufacturer’s testing laboratory to test
the desired product as per applicable Indian Standard.
5. Accept the Scheme of Testing & Inspection (STI).
6. Ready to pay the annual marking fee as decided by competent authority considering the large-scale manufacturer
7. Separate application is required to be submitted for each product/Indian Standard and for factory location.
Who can apply for Product Certification Scheme (ISI Mark)
Since 1995
06 Product Certification Scheme (ISI Mark)

11. 07 Procedure for Grant of License under FMCS
Since 1995
STEP 01
Filing Application
Application Preparation
Planning of Factory Inspection
On-site Inspection
Independent Testing of Product
Grant License
STEP 02
STEP 03
STEP 04
STEP 05
STEP 06

12. • This scheme is only for domestic manufacturers located in India.
The purpose of this scheme is to give customers a third-party
assurance of the quality, safety and reliability of products.
• The presence of the ISI Mark known as the standard mark on the
product is assured to conform to the specifications. ISI mark on
the product provides new thrust to standardization, quality
control, safety and reliability of the product for the consumers.
• Under this scheme (Scheme-I of Schedule-II), local manufacturers
can seek certification from BIS for use of Standard Mark on their
products. The product certification scheme comprises of
two processes i.e. Simplified Process and Normal Process.
08 Product Certification Scheme (For Domestic Manufacturers
only)
Since 1995

13. Who can apply
Manufacturers (who is actually producing the goods) having their company within India can
apply for domestic license. The company shall ensure below listed points before applying
for said license:
1. Conformation of their product according to suitable Indian Standard.
2. Have complete in-house manufacturing facility at the factory location.
3. Have complete in-house testing facility against the particular Indian Standard for which
applicant would like to apply to obtain ISI Mark. Outsourcing is allowed up to some extent.
4. Have qualified & competent quality control staff in the manufacturer’s
testing laboratory to test the desired product as per applicable Indian Standard.
5. Accept the Scheme of Testing & Inspection (STI).
6. Ready to pay the annual marking fee as decided by competent authority.
7. Separate application is required to be submitted for each product/Indian Standard and for
factory location.
08 Product Certification Scheme (For Domestic Manufacturers
only)
Since 1995

14. 09 Normal Process of ISI Registration
Since 1995
STEP 01 STEP 02
STEP 03 STEP 04
STEP 05 STEP 06
Filing Application
Application Preparation
Planning of Factory Inspection On-site Inspection
Independent Testing
of Product
Grant License

15. 10 Simplified Process for Grant of License
Since 1995
Closure of non-coformity
Procedure for grant of
license under product
certification scheme
For Simplified Process
Filing of Application
Application Preparation
Planning of Factory
Inspection
On-site factory
Inspection
& allotment of CM/L
number
Independent Testing
of Product
01 02
03 04
05 06

16. • After submission of the application in BIS, applicant will receive and e-mail
intimation mentioning the expected dates of inspection.
• Applicant has to arrange the tickets, visa, fooding & lodgings who is allotted
by BIS.
• Further inspection of the unit is carried out on a mutually agreed date.
• Samples are being tested within the premises & also samples are drawn for
independent testing in any BIS recognized lab.
• If any minor gaps is found by the inspecting officer, the same will be inspected
to fulfil within stipulated time.
Timeline: 2-3 months
11 Factory Inspection Highlights
Since 1995

17. ASC Group started in 1995 as a CA firm with a view to offer all accounting and financial services for individuals and
corporates under one roof.
It has a team of more than 300+ people including 120 experts comprising of Chartered Accountants, Company Secretaries,
Advocates, Insolvency Professionals and Management Professionals. Being Registered Office in Delhi, it has several branches
in India like Noida, Gurugram, Mumbai, Bangalore, Chennai and overseas countries with a branch office set up in Singapore
and Canada.
ASC Group is offering services through many interlinked entities: Alok Sinhal & Co. (the original Chartered Accountant firm),
Themis and Dike (the legal arm of the ASC group), ASC Consulting Private Limited (catering to multinationals doing business
in India), ASC Consulting Pvt. Ltd. (serving to corporates located in Singapore), ASC Ventures Corp (serving to corporates
located in Canada) etc.
Personal
Attention
Practical
Expert
Advice
Positive
Solutions
Singapor
e
Canada
Delhi
Noida
Gurugra
m
Mumbai
Bangalor
e
Chennai
Pune
01
About us
Since 1995
The Firm’s rich heritage is apparent in the values for which we stand – integrity, reliability & proficiency. It is our considered
policy to provide professional services in a conservative manner with due attention to the security and propriety of the
transactions involved.

18. Taxation
01 Risk Advisory &
Assurance
02
Secretarial &
Legal
03 Consulting
04
• International Taxation
• Transfer Pricing
• Expatriate Taxation
• Corporate Income Tax
• Withholding Tax
• Personnel Income tax
• Goods and Service Tax
• Assessment & Tax Litigation
• Forensic & Investigation Services
• Audit
• Process Management and Re-
Engineering
• Internal Control Reviews
• Certification Services
• Incorporation & Statutory Registrations
• Companies Act, 2013 Compliances
• RBI / FEMA Compliances
• Liquidation Services
• Insolvency & Bankruptcy
• Legal Services (Corporate & Labor)
• Drafting of Agreements / Contracts
• Arbitration & Dispute Resolution
• India Entry & Business
Startup Consulting
• Merger & Acquisition
• Foreign Trade Policy & Free
Trade Agreements
• Custom & EXIM Policy
• SVB & AEO Registration
• Legal Metrology, BIS, FSSAI,
ETA, E-Waste, Plastic Waste
Registration
• Sourcing Solutions
• Outsourcing Services
ACTING AS A CATALYST FOR ALL TYPE OF CLIENT BASE
Business
Conglomerates
High Net-
worth
Individuals
Entrepreneurs Family offices MNCs
02 Services
Since 1995

19. 73, National Park,
Lajpat Nagar IV,
New Delhi - 110024
(India)
P: 011-41729056-
57, 41601289
Delhi Office
605, Suncity
Business Tower
Golf Course Road,
Sector-54,
Gurgaon,
Haryana - 122002
Phone:
+91-124-4245110 /
111 / 116
Haryana
Office
0420, 2nd Floor,
20th Main, 6th
Block,
Koramangala,
Bangalore-
560095
Phone:
080421-39271
Karnataka
Office
C-100, Sector-2,
Noida- 201301
Uttar Pradesh
Phone:
0120-4729400
Uttar Pradesh
office
Office No. 315-316,
A wing, Sagar Tech
Plaza, Andheri
Kurla Road,
Sakinaka, Andheri
(E), Mumbai -
400072, India.
Phone No:
022-67413369/
70/71
Maharashtra
Office
37, TTK Road, CIT
Colony, Alwarpet,
Chennai, Tamil
Nadu 600018
Mobile No:
+91-8860774980
Chennai
Office
885, Progress Ave
Toronto, Ontario,
M1H 3G3, Canada
Phone:
(+1) 437-774-4488
Canada
Office
One Raffles Place
Tower 1, 27-03
Singapore - 048616
Singapore
Office
Office No. 511, City
Space,
Vimannagar, Nagar
Road, Pune MH –
411014
Phone No :
+91-9022131399
Pune
Office
Since 1995
09 Contact us
Contact us directly at:
➢ +91 9999043311
➢ info@ascgroup.in

20. ASC Consulting Pvt Ltd
• Address:- C100, Sector-2,
Noida-201301
• Website:- www.ascgroup.in
• Email Id:- info@ascgroup.in
• Ph. No:- +91-9999043311
Since 1995
12 Contact

21. THANK YOU