Onshore modules construction – a fabricator’s viewMerrylyn Yeo
Understand the important lessons learned and common pitfalls to avoid in contract formation and contract execution through this presentation told from a fabricator’s point of view. This presentation covers a discussion on contracting model, contracting strategy and project organization setup.
Advisian dynamic process simulation capability june 2019Advisian
Dynamic Process Simulation allows the prediction of not only how a system is expected to behave when it is operating at the targeted design point – it is capable of predicting how it will behave when away from its “design point”.
Why modularization should not be based on cost and size aloneMerrylyn Yeo
Dr Neveen Moussa, Principal at Sinclair Knight Merz, gives her take on the issue of cost and size as it relates to modularization. She also explains the methodology for “right sizing” your modularization decision.
Research Associate Dr Callum Rae discusses
the challenges presented by the growth in the
Energy Centre market, and outlines our alternative
approach to Energy Centre design, which has
successfully been applied to the AECC Energy
Centre project.
As the highly prestigious London Wall Place
project approaches completion of the shell
and core, Director, James O’Byrne reviews the
project and the application of BIM, and discusses
the various benefits on the overall design and
coordination process.
Diesel fuel is now a Category 3 flammable liquid.
Technical Board Director Wyn Turnbull reports
on the impact to diesel storage and use, as the
result of the recent Classification, Labelling and
Packaging of Chemical (CLP) Regulations 2015
which have replaced the now revoked CHIP
Regulations.
Associate Director Paul Scriven provides a brief
overview of the WELL Building Standard and
discusses why and how its popularity is growing.
Finally, Group Director Robert Thorogood discusses
how far standardisation of controls and automation
have developed using the IEC 61850 integration
standard, and what the benefits may bring to the
control of power distribution.
Paul Flatt, Group Chairman and CEO,
Hurley Palmer Flatt.
Onshore modules construction – a fabricator’s viewMerrylyn Yeo
Understand the important lessons learned and common pitfalls to avoid in contract formation and contract execution through this presentation told from a fabricator’s point of view. This presentation covers a discussion on contracting model, contracting strategy and project organization setup.
Advisian dynamic process simulation capability june 2019Advisian
Dynamic Process Simulation allows the prediction of not only how a system is expected to behave when it is operating at the targeted design point – it is capable of predicting how it will behave when away from its “design point”.
Why modularization should not be based on cost and size aloneMerrylyn Yeo
Dr Neveen Moussa, Principal at Sinclair Knight Merz, gives her take on the issue of cost and size as it relates to modularization. She also explains the methodology for “right sizing” your modularization decision.
Research Associate Dr Callum Rae discusses
the challenges presented by the growth in the
Energy Centre market, and outlines our alternative
approach to Energy Centre design, which has
successfully been applied to the AECC Energy
Centre project.
As the highly prestigious London Wall Place
project approaches completion of the shell
and core, Director, James O’Byrne reviews the
project and the application of BIM, and discusses
the various benefits on the overall design and
coordination process.
Diesel fuel is now a Category 3 flammable liquid.
Technical Board Director Wyn Turnbull reports
on the impact to diesel storage and use, as the
result of the recent Classification, Labelling and
Packaging of Chemical (CLP) Regulations 2015
which have replaced the now revoked CHIP
Regulations.
Associate Director Paul Scriven provides a brief
overview of the WELL Building Standard and
discusses why and how its popularity is growing.
Finally, Group Director Robert Thorogood discusses
how far standardisation of controls and automation
have developed using the IEC 61850 integration
standard, and what the benefits may bring to the
control of power distribution.
Paul Flatt, Group Chairman and CEO,
Hurley Palmer Flatt.
Manual tejeRedes de Articuladores y ParticipantestejeRedes
El manual de articuladores y participantes tejeRedes, está enfocado a quienes deseen profundizar, perfeccionar y materializar los aprendizajes del trabajo en red y sistemas de articulación colaborativos.
Para bajar la versión completa ir a http://www.tejeredes.net/
M. Bonierbale, E. Mihovilovich, W. Amoros, J. Landeo and M. Orrillo
Sustaining and Projecting Genetic Diversity for Potatoes Adapted To Changing Environments
14th Australasian Plant Breeding and 11th SABRAO Conference, Cairns, Queensland, Australia, 10-14 August 2009
Manual tejeRedes de Articuladores y ParticipantestejeRedes
El manual de articuladores y participantes tejeRedes, está enfocado a quienes deseen profundizar, perfeccionar y materializar los aprendizajes del trabajo en red y sistemas de articulación colaborativos.
Para bajar la versión completa ir a http://www.tejeredes.net/
M. Bonierbale, E. Mihovilovich, W. Amoros, J. Landeo and M. Orrillo
Sustaining and Projecting Genetic Diversity for Potatoes Adapted To Changing Environments
14th Australasian Plant Breeding and 11th SABRAO Conference, Cairns, Queensland, Australia, 10-14 August 2009
Naval Aviation Materials and Manufacturing Workshop: Accelerating Technolog...frazierwe
The purpose of the workshop was to identify the means of effecting a 30% reduction in cost and a 30% increase in throughput, by accelerating the insertion of extant and emerging Materials and Manufacturing Technologies.
Project Name Motional Energy Generation and Recovery Associ.docxwkyra78
Project Name:
Motional Energy Generation and Recovery
Associated Projects:
Green Energy Management
Sponsor:
Russell Chair of Manufacturing Excellence
Executive Management
Authorization:
Dr. Ton Cheatham
Client Dept:
ETIS
Client Contact:
Dr. Walter Boles
Project Lead:
Dr. Charles Perry
Dept:
ETIS
Date Assigned:
06/07/04
Project Lead:
Dept:
Date Assigned:
Priority:
For Organization
High
X
Medium
Low
For Business Area
High
X
Medium
Low
Business Case:
(“WHY” should this project be done? Identify the specific current and future business needs that this project meets. State how the proposed project aligns with the strategic objectives of the business area and organization.)
Innovative methods to save energy are needed with continued escalation in energy costs. One area is in automotive applications where the objective is to increase the efficiency in miles per gallon(mpg). Moving an average vehicle through still air at a velocity of 70 miles per hour(mph) requires from 30 to 80 horsepower depending on the design and size of the vehicle. This energy is wasted and not recoverable. One method to recover some of this energy is to utilize a fan or turbine to convert the moving air to electrical energy. Depending on the size of the fan and generator that is powered by the moving air, up to 1 to 2 horsepower could be generated at 70 mph. If the air driven generator could supply the vehicle’s electrical load at highway speeds, this would reduce the load to the gasoline driven engine thus increasing gas mileage. Average gas mileage could increase up to 5 mpg if a wind driven generator could supply the electrical energy to the vehicle at highway speeds. This project is to evaluate the feasibility of this concept. If proven by laboratory measurements, air driven generation of automotive electrical energy would have a significant impact on fuel usage. In addition, an engineering project of this type would result in patentable inventions and potential monetary benefit to MTSU. A successful program would lead to visibility for the University and increased student enrollment. These objectives are in line with the strategic goals of the University.
Scope /Project Deliverables:
(“WHAT” will the project deliver? Scope answers the question “What will be done on this project, and what are the products or services that will be provided? Deliverable – What are the measurable products, components, and services produced by the project? How will you know when you are “DONE”)
A laboratory-size wind tunnel will be designed and built to provide an adjustable wind velocity from 20 to 70 mph through a circular tube having an 18 inch inner diameter and 8 feet long. A fan driven D.C. generator will be positioned at one end of the circular tube connected to a suitable resistive load with the capability to measure generator output current and voltage. Measurements will be taken to determine the maximum electrical energy generate ...
Development of new products is extremely essential for the success and smooth running of every industry. Companies have to constantly inject innovations and design efforts to make the design processes easy and to attract consumers in a constantly in a evolving and highly competitive market with best quality . Keeping ahead of the competition by bringing new and exciting products to market fast, and at the necessary level of quality, presents a major engineering challenge. A new casting bracket in place of old stamping brackets in snowmobile chassis development process is described, which introduces advanced FEM and Optimization technology into the concept development phase. Detailed predictions of interacting parts in a mechanism assembly are made possible through use of value engineering based process and material selection and advanced simulation technology. Design optimization is then employed using the modeling as a virtual testing ground for design variants. The approach provides clear design direction and helps to improve performance and reduce the unnecessary welding efforts of bracket manufacturing. Design is an intelligent activity that begins with design requirements and ends with a product description. Using Altair Optistruct was able to significantly reduce design time by sub modeling with structural optimization. The resultant casting bracket design showed superior performance characteristics. And finely the manufacturer had to put less efforts in stamping and part welding , which reduced the manufacturing time and cost also.
DigitalClone for Engineering Supporting Business Initiatives of Rotorcraft OE...Sentient Science
Sentient Science’s DigitalClone for Engineering Software is used by aircraft OEM, Suppliers and Operators to evaluate new and upgrade designs through materials science-based computational testing. The software is used throughout the design cycle to life critical components within the drivetrain. DigitalClone for Engineering enables certified digital models to be used by aircraft operators for asset management and supply chain planning and demand forecasting by simulating the models under multiple operational profiles.
Spacerolls is a deep tech startup focused on the development of axial flow compressor technology for gas turbine jet engines, with the aim of enhancing their fuel efficiency. As a company dedicated to providing pure technology solutions, we are committed to innovating and transforming the future of the aerospace industry through efficient applications.
Systems Focused Product Development Of The HypercarDavid F. Taggart
The Hypercar company and the Hypercar program are used as an example of how systems integration can be a focus and key enabler in challenging product development efforts
Advanced Materials International Forum, Bari 18-19 settembre, conferenza internazionale dedicata ai materiali avanzati e alle loro possibili applicazioni nei settori industriali, con un focus particolare sui trasporti (aerospazio, automotive, navale e cantieristico).
B Kindilien-Does Manufacturing Have a Future?jgIpotiwon
Presentation to students and educators at Eastern Connecticut State University in 2008 on the challenges, and opportunities, facing people in manufacturing.
This presentation was intended to convey the status of utility PV power generation, and the impact that affordable and abundant power from the Sun will have on society, the environment, and future opportunities.
this presentation was prepared for the first annual Cal Poly Materials Engineering Industry Day, with the intention of inspiring Materials Engineering students about the wide variety of careers and opportunities available to them as Materials Engineers.
I was invited by the IDEO team in Palo Alto to share my product development process for designing systems for optimal efficiency. It turns out that there are a lot of common perspectives and techniques between IDEO’s processes and those of the Skunk Works and that I practice in product development.
2011 GTM Summit: Implications of Thin‐Film Technologies on Utility PV Project...David F. Taggart
David F. Taggart presents data and examples of how through design optimization, thin film fixed tilt PV plants can beat the financials of tracking crystalline plants, even in TOU markets
Developing products to meet particularly challenging requirements, ones that might be considered to require a “breakthrough” in at least one aspect, requires a different process, one that emphasizes systems engineering and the individual creativity and diversity of the product development team members. This process builds upon the legacy of the Skunk Works product team dynamic, and years of experience with clean sheet design development using diverse, multi-industry development teams.
Introductory overview of Skunk Works' history and the product development culture and engineering environment that resulted from Kelly’s fundamental confidence and belief in his engineers
Engineering Sustainability into the Design ProcessDavid F. Taggart
Presentation to the Engineering College of Cal Poly San Luis Obispo in 2003 on incorporating sustainability principles into the product development process
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Presentation to the Defense Science Board Task Force on “Improving Fuel Efficiency of Weapons Platforms”
1. Presentation to the Defense Science Board Task Force on “Improving Fuel Efficiency of Weapons Platforms” September 20, 2000 David F. Taggart Hypercar, Inc. [email_address] +44 7974 920 441 Riding a Bike (with the emphasis on “riding”)
15. PSC Assembly Flow PRELIMINARY DESIGN Design Detail for Each Component Includes: Structural Sizing: Failure Mode and Load Tooling Approach Fabrication Approach, Materials, and Process Assembly Sequence and Flow Bottoms Up Production Cost and Airframe Weight