Revit BIM Color Coded Unit Modeling
•
0 likes•295 views
The document contains a plan for level 1 of a parking deck, including labels for various structural components like light beams (LB), columns, and panels. It also includes callouts for areas like access corridors (AC), dwelling units (DEM), and entries. Additional information on the document includes the project number, date drawn, scale, and contact information for the drafting company.
Report
Share
Report
Share
Download to read offline
Recommended
Schneider electric code
This document contains a list of reference descriptions for various electrical components. It includes circuit breakers, switches, timers, relays, fuses, contactors, and other devices. The references provide information on specifications like voltage, current rating, number of poles, and certification standards. There are over 200 separate entries consisting of alphanumeric codes and descriptive names for the components.
Trspred
The document contains a series of entries with the format "ARRGXXXX XX YY ZZ" where XXXX is a code, XX is a number, YY is a letter or number, and ZZ are numbers. Each entry records coordinates for a series of points. There are over 100 such entries recording point locations.
Power point
1. The document provides information about various digital modulation techniques and semiconductor devices. It discusses modulation types like ASK, FSK, PSK, QAM and their working principles.
2. It also explains different field effect transistors like JFET, MOSFET and semiconductor devices like Zener diode, LED, Gunn diode, PIN diode and SCR along with their applications.
3. Tables and diagrams are used to illustrate the block diagrams and characteristics of modulation systems like BPSK, QPSK, OQPSK and relationships between modulation techniques.
Gd35 manual v1.5
This document discusses the open collector input configuration of a PLC system. It shows the connections between analog outputs AO1 and AO2, analog inputs AI1 and AI2, and the 485 communication bus. It also includes a timing diagram showing the signals for running commands, zeroing commands, and positioning finished signals.
Prh800
This document provides a circuit diagram and specifications for a PRH 800 guitar effects pedal made by Indústria Eletrônica Ltda. The diagram shows the circuit layout with integrated circuits, transistors, resistors, and capacitors used to create effects like overdrive, distortion, volume, bass, treble, and more. Technical specifications are provided for voltages, currents, and component values.
74ls390
The document provides information on the SN54/74LS390 and SN54/74LS393 dual decade counter and dual 4-stage binary counter integrated circuits. It describes the operation and connections of each chip, including truth tables showing the output patterns. Specifications such as pin names and numbers, electrical characteristics, and packaging/ordering details are also included.
74 hc hct393
This document provides product information for the 74HC393 and 74HCT393 dual 4-bit binary ripple counters. It includes descriptions of the general features, pin configurations, functional diagrams, electrical specifications and ordering information for the devices. The counters each have a clock input, reset input, and 4 output pins that transition through the counting states from 0 to 15 with each clock pulse.
10004239951
This document contains schematic diagrams and wiring diagrams for the auxiliary equipment of a power transformer. It includes diagrams for the control and power distribution, cooling and lighting controls, sudden pressure relay, current transformers, alarms and trips, motor drive power, vacuum interrupting monitor, motor drive control, motor drive alarms, motor drive wiring, and bills of materials. It also lists specifications for the transformer such as the customer, type, power rating, voltages, and purchase order number.
Recommended
Schneider electric code
This document contains a list of reference descriptions for various electrical components. It includes circuit breakers, switches, timers, relays, fuses, contactors, and other devices. The references provide information on specifications like voltage, current rating, number of poles, and certification standards. There are over 200 separate entries consisting of alphanumeric codes and descriptive names for the components.
Trspred
The document contains a series of entries with the format "ARRGXXXX XX YY ZZ" where XXXX is a code, XX is a number, YY is a letter or number, and ZZ are numbers. Each entry records coordinates for a series of points. There are over 100 such entries recording point locations.
Power point
1. The document provides information about various digital modulation techniques and semiconductor devices. It discusses modulation types like ASK, FSK, PSK, QAM and their working principles.
2. It also explains different field effect transistors like JFET, MOSFET and semiconductor devices like Zener diode, LED, Gunn diode, PIN diode and SCR along with their applications.
3. Tables and diagrams are used to illustrate the block diagrams and characteristics of modulation systems like BPSK, QPSK, OQPSK and relationships between modulation techniques.
Gd35 manual v1.5
This document discusses the open collector input configuration of a PLC system. It shows the connections between analog outputs AO1 and AO2, analog inputs AI1 and AI2, and the 485 communication bus. It also includes a timing diagram showing the signals for running commands, zeroing commands, and positioning finished signals.
Prh800
This document provides a circuit diagram and specifications for a PRH 800 guitar effects pedal made by Indústria Eletrônica Ltda. The diagram shows the circuit layout with integrated circuits, transistors, resistors, and capacitors used to create effects like overdrive, distortion, volume, bass, treble, and more. Technical specifications are provided for voltages, currents, and component values.
74ls390
The document provides information on the SN54/74LS390 and SN54/74LS393 dual decade counter and dual 4-stage binary counter integrated circuits. It describes the operation and connections of each chip, including truth tables showing the output patterns. Specifications such as pin names and numbers, electrical characteristics, and packaging/ordering details are also included.
74 hc hct393
This document provides product information for the 74HC393 and 74HCT393 dual 4-bit binary ripple counters. It includes descriptions of the general features, pin configurations, functional diagrams, electrical specifications and ordering information for the devices. The counters each have a clock input, reset input, and 4 output pins that transition through the counting states from 0 to 15 with each clock pulse.
10004239951
This document contains schematic diagrams and wiring diagrams for the auxiliary equipment of a power transformer. It includes diagrams for the control and power distribution, cooling and lighting controls, sudden pressure relay, current transformers, alarms and trips, motor drive power, vacuum interrupting monitor, motor drive control, motor drive alarms, motor drive wiring, and bills of materials. It also lists specifications for the transformer such as the customer, type, power rating, voltages, and purchase order number.
Digital Counter 0-999
This document contains a list of parts and their identifiers used in an electronic circuit. It includes integrated circuits, transistors, resistors, capacitors and other components. The document provides the names and identifiers for over 50 unique parts that make up the circuit.
10004455533
The document appears to be an auxiliary equipment diagram for a power transformer. It includes 28 sheets that provide details on the transformer's cooling system, control system, monitoring equipment, motor drive, wiring diagrams, and bill of materials. The diagrams show the electrical schematics and connections for components like fans, pumps, sensors, relays, and monitoring devices that control and protect the transformer.
Chapter9
The document discusses the video system and interconnections for the MEIDEX payload on the International Space Station. It includes block diagrams of the video splitter/buffer that distributes video from the XYBION camera to various locations, as well as diagrams showing how video is routed between the MEIDEX payload and video interfaces in the crew cabin.
12966 chassis la6-a_para_tv_21_pulgadas_pantalla_plana
This document contains lists of replaceable transistors, diodes, and resistors for an electronic device. The lists include part names, codes, and specifications. For example, the transistor list includes part numbers like 2SA564A, types like P,Q,R, and codes like 7T200182. The diode list includes part numbers like 1S1555, types like AA, and approved diode names. The resistor list provides values like 1/10GJ150C and component designations like R1101A.
74ls373
The SN54/74LS373 and SN54/74LS374 are octal latch and flip-flop integrated circuits with 3-state outputs. The SN54/74LS373 has 8 transparent latches and the SN54/74LS374 has 8 D-type flip-flops. Both have common control inputs for latch/clock enable and output enable and are used in bus-oriented applications due to their 3-state outputs.
Ciclotron dynamic 12000 h 2ω
This document contains a schematic diagram with over 100 electronic components including resistors, capacitors, transistors, diodes, integrated circuits, and other symbols. The schematic shows a complex circuit with multiple sections and subcircuits connected together. Power is supplied at +/- 15V. The main sections include voltage regulators, timing circuits, driver circuits, and other subcircuits connected to output terminals.
M61266 Datasheet PDF
This document is a schematic diagram for an electronics device. It contains:
1) Numerous electronic components labeled with reference designators including integrated circuits, transistors, capacitors, resistors, inductors, and other parts.
2) Wiring diagrams showing how the components are connected together in various circuits.
3) Labels identifying functions of the circuits such as power supplies, video processing, audio, and high voltage sections.
854 f wiring
This document contains a wiring diagram for a vehicle diagnostic system. It lists various components and sensors, and shows their connections via labeled wires. These include things like glow plugs, injectors, temperature and pressure sensors, and diesel exhaust fluid components. The diagram connects these components to control modules like the ECM via various gauges of wire.
Protocol for Anchor bolt.xlsx
The document provides details from the final inspection submission for the Bulk Liquid Storage Terminal Facility Phase II project. It includes information on 8 foundation sites that were inspected on April 19, 2015, such as location markings, dimensions, diagonal lengths, top of concrete levels, and anchor bolt top levels. Deviations from design drawings are also noted. Inspections found dimensions to be within 0.02 mm of specifications for all foundations.
Schematic
This document contains a wiring diagram for a generator set. It shows the wiring connections between various generator set components including the generator, circuit breakers, sensors, switches, and control modules. Notes provide additional information on some wiring connections and component locations. The diagram uses standard electrical and wiring symbols.
Pin timer 555
The document describes the NE/SA/SE555/SE555C timer integrated circuit. It provides specifications and characteristics for the timer including:
- It can produce accurate time delays or oscillations controlled by external resistors and capacitors.
- It has a turn-off time of less than 2μs, can operate at frequencies over 500kHz, and can time events from microseconds to hours.
- It has a high output current capability and adjustable duty cycle.
- Typical applications include precision timing, pulse generation, time delay generation, and pulse width modulation.
AN1431T LTspice Model (Free SPICE Model)
This document contains a device modeling report for a shunt regulator component. It includes:
1) The SPICE model for the AN1431T shunt regulator from Panasonic, including component values and descriptions.
2) Simulation results showing the reference voltage is accurately modeled as 2.5V under different load currents.
3) The dynamic impedance is also closely matched between simulation and measurement.
4) Graphs of the output characteristic and internal diode references are included for comparison against measurements.
Osciloscopio 1
This document is a circuit diagram for an oscilloscope probe buffer that connects to a computer sound card. It contains two identical circuits - one for the left audio channel and one for the right. Each circuit buffers a probe signal, limits the output, and allows for gain/attenuation before the signal reaches the sound card inputs. A note recommends using an op-amp other than the UA741 if possible.
Studio r-z5 - sub h bass
This document appears to be a circuit diagram or technical specifications for an electronics device. It contains a list of component identifiers (T1, R9, C5, etc.) and their corresponding part references. The document also indicates which components comprise the exciter, includes voltage and resistance values, and notes that the diagram was still incomplete as of a certain date.
Esquemas eléctricos Toyota Paseo 1996
This document provides an overall electrical wiring diagram for a vehicle. It shows the various electrical components and circuits in the vehicle, including the engine control module, sensors, actuators, switches, and their electrical connections. Key components shown are the battery, starter, alternator, ignition switch, fuel pump, sensors for throttle position, manifold pressure, temperatures, and oxygen level. It also indicates the wiring connections between the engine control module and other control units for features like cruise control and the transmission.
Ciclotron tip5000 2 h ii
This document contains circuit diagrams and component information for a TIP 5000 2H audio amplifier. The diagrams show the circuits for the preamplifier, protection/display, power/relay/power supply, and non-used sections. The preamplifier circuit diagram displays the component layout and values for the input, volume, gain, and signal processing stages. Protection components and displays are shown for overcurrent, clipping and temperature indicators. The power supply includes a transformer, rectification, filtering and voltage regulation circuits to provide positive and negative rail voltages to the amplifier circuits.
ce226hw4
The document provides a conductor and conduit schedule listing the types and quantities of conductors and cables run through various sized conduits. It also includes a pole and equipment schedule listing pole types, mast arm lengths, luminaire types and other special requirements for different pole locations.
12777 coastal single pages part79
The document lists various antique hardware products including curly tail fasteners, bulb end locking espagnolettes, curly tail espag handles, and bulb end casement stays. Each product is identified by a code number and is available in different finishes such as black or painted white. Hand orientation (left or right) and size are also specified for some of the hardware.
8051 development board project report
my first project on PCB designing ,
8051 development board with all detail explanation and layout of different parts of circuits in development board
NWQ Copper Riser Layout 160100
This document provides labeling conventions and an overview of the legacy copper infrastructure for the voice network in several buildings on the UWM campus, including NWQA, NWQB, NWQC, NWQD, NWQE, NWQF and NWQG. It identifies the location and specifications of various riser cables, patch panels, and 110 blocks that comprise the backbone infrastructure and notes some non-standard implementations. Abbreviations and conventions used in the copper riser cable labels are explained.
BIM Metal Floor Joists Drawing
This document provides framing details for unit V, including floor joist layout and materials. It includes two levels of floor framing at heights of 10' 5-1/2" and 9' 1" respectively. Floor joists are 14 gauge and spaced 24 inches on center. Blocking is placed between bearing walls and at 8 foot intervals. Rim tracks and strapping are also specified. A deck transition and curb stop are detailed. The floor area is 1320 square feet over 47 foot joists. A bill of materials is provided listing member sizes, materials, quantities and lengths.
Hotel Furdown Framing-Ceiling
This document contains bills of material for steel framing members including columns, beams, and joists of various lengths. It also includes an engineering drawing showing the layout of these members in Panel 6 including dimensions and member labels. The contractor is responsible for verifying all dimensions and ensuring local code compliance before installation.
More Related Content
What's hot
Digital Counter 0-999
This document contains a list of parts and their identifiers used in an electronic circuit. It includes integrated circuits, transistors, resistors, capacitors and other components. The document provides the names and identifiers for over 50 unique parts that make up the circuit.
10004455533
The document appears to be an auxiliary equipment diagram for a power transformer. It includes 28 sheets that provide details on the transformer's cooling system, control system, monitoring equipment, motor drive, wiring diagrams, and bill of materials. The diagrams show the electrical schematics and connections for components like fans, pumps, sensors, relays, and monitoring devices that control and protect the transformer.
Chapter9
The document discusses the video system and interconnections for the MEIDEX payload on the International Space Station. It includes block diagrams of the video splitter/buffer that distributes video from the XYBION camera to various locations, as well as diagrams showing how video is routed between the MEIDEX payload and video interfaces in the crew cabin.
12966 chassis la6-a_para_tv_21_pulgadas_pantalla_plana
This document contains lists of replaceable transistors, diodes, and resistors for an electronic device. The lists include part names, codes, and specifications. For example, the transistor list includes part numbers like 2SA564A, types like P,Q,R, and codes like 7T200182. The diode list includes part numbers like 1S1555, types like AA, and approved diode names. The resistor list provides values like 1/10GJ150C and component designations like R1101A.
74ls373
The SN54/74LS373 and SN54/74LS374 are octal latch and flip-flop integrated circuits with 3-state outputs. The SN54/74LS373 has 8 transparent latches and the SN54/74LS374 has 8 D-type flip-flops. Both have common control inputs for latch/clock enable and output enable and are used in bus-oriented applications due to their 3-state outputs.
Ciclotron dynamic 12000 h 2ω
This document contains a schematic diagram with over 100 electronic components including resistors, capacitors, transistors, diodes, integrated circuits, and other symbols. The schematic shows a complex circuit with multiple sections and subcircuits connected together. Power is supplied at +/- 15V. The main sections include voltage regulators, timing circuits, driver circuits, and other subcircuits connected to output terminals.
M61266 Datasheet PDF
This document is a schematic diagram for an electronics device. It contains:
1) Numerous electronic components labeled with reference designators including integrated circuits, transistors, capacitors, resistors, inductors, and other parts.
2) Wiring diagrams showing how the components are connected together in various circuits.
3) Labels identifying functions of the circuits such as power supplies, video processing, audio, and high voltage sections.
854 f wiring
This document contains a wiring diagram for a vehicle diagnostic system. It lists various components and sensors, and shows their connections via labeled wires. These include things like glow plugs, injectors, temperature and pressure sensors, and diesel exhaust fluid components. The diagram connects these components to control modules like the ECM via various gauges of wire.
Protocol for Anchor bolt.xlsx
The document provides details from the final inspection submission for the Bulk Liquid Storage Terminal Facility Phase II project. It includes information on 8 foundation sites that were inspected on April 19, 2015, such as location markings, dimensions, diagonal lengths, top of concrete levels, and anchor bolt top levels. Deviations from design drawings are also noted. Inspections found dimensions to be within 0.02 mm of specifications for all foundations.
Schematic
This document contains a wiring diagram for a generator set. It shows the wiring connections between various generator set components including the generator, circuit breakers, sensors, switches, and control modules. Notes provide additional information on some wiring connections and component locations. The diagram uses standard electrical and wiring symbols.
Pin timer 555
The document describes the NE/SA/SE555/SE555C timer integrated circuit. It provides specifications and characteristics for the timer including:
- It can produce accurate time delays or oscillations controlled by external resistors and capacitors.
- It has a turn-off time of less than 2μs, can operate at frequencies over 500kHz, and can time events from microseconds to hours.
- It has a high output current capability and adjustable duty cycle.
- Typical applications include precision timing, pulse generation, time delay generation, and pulse width modulation.
AN1431T LTspice Model (Free SPICE Model)
This document contains a device modeling report for a shunt regulator component. It includes:
1) The SPICE model for the AN1431T shunt regulator from Panasonic, including component values and descriptions.
2) Simulation results showing the reference voltage is accurately modeled as 2.5V under different load currents.
3) The dynamic impedance is also closely matched between simulation and measurement.
4) Graphs of the output characteristic and internal diode references are included for comparison against measurements.
Osciloscopio 1
This document is a circuit diagram for an oscilloscope probe buffer that connects to a computer sound card. It contains two identical circuits - one for the left audio channel and one for the right. Each circuit buffers a probe signal, limits the output, and allows for gain/attenuation before the signal reaches the sound card inputs. A note recommends using an op-amp other than the UA741 if possible.
Studio r-z5 - sub h bass
This document appears to be a circuit diagram or technical specifications for an electronics device. It contains a list of component identifiers (T1, R9, C5, etc.) and their corresponding part references. The document also indicates which components comprise the exciter, includes voltage and resistance values, and notes that the diagram was still incomplete as of a certain date.
Esquemas eléctricos Toyota Paseo 1996
This document provides an overall electrical wiring diagram for a vehicle. It shows the various electrical components and circuits in the vehicle, including the engine control module, sensors, actuators, switches, and their electrical connections. Key components shown are the battery, starter, alternator, ignition switch, fuel pump, sensors for throttle position, manifold pressure, temperatures, and oxygen level. It also indicates the wiring connections between the engine control module and other control units for features like cruise control and the transmission.
Ciclotron tip5000 2 h ii
This document contains circuit diagrams and component information for a TIP 5000 2H audio amplifier. The diagrams show the circuits for the preamplifier, protection/display, power/relay/power supply, and non-used sections. The preamplifier circuit diagram displays the component layout and values for the input, volume, gain, and signal processing stages. Protection components and displays are shown for overcurrent, clipping and temperature indicators. The power supply includes a transformer, rectification, filtering and voltage regulation circuits to provide positive and negative rail voltages to the amplifier circuits.
ce226hw4
The document provides a conductor and conduit schedule listing the types and quantities of conductors and cables run through various sized conduits. It also includes a pole and equipment schedule listing pole types, mast arm lengths, luminaire types and other special requirements for different pole locations.
12777 coastal single pages part79
The document lists various antique hardware products including curly tail fasteners, bulb end locking espagnolettes, curly tail espag handles, and bulb end casement stays. Each product is identified by a code number and is available in different finishes such as black or painted white. Hand orientation (left or right) and size are also specified for some of the hardware.
8051 development board project report
my first project on PCB designing ,
8051 development board with all detail explanation and layout of different parts of circuits in development board
NWQ Copper Riser Layout 160100
This document provides labeling conventions and an overview of the legacy copper infrastructure for the voice network in several buildings on the UWM campus, including NWQA, NWQB, NWQC, NWQD, NWQE, NWQF and NWQG. It identifies the location and specifications of various riser cables, patch panels, and 110 blocks that comprise the backbone infrastructure and notes some non-standard implementations. Abbreviations and conventions used in the copper riser cable labels are explained.
What's hot (20)
12966 chassis la6-a_para_tv_21_pulgadas_pantalla_plana
12966 chassis la6-a_para_tv_21_pulgadas_pantalla_plana
Viewers also liked
BIM Metal Floor Joists Drawing
This document provides framing details for unit V, including floor joist layout and materials. It includes two levels of floor framing at heights of 10' 5-1/2" and 9' 1" respectively. Floor joists are 14 gauge and spaced 24 inches on center. Blocking is placed between bearing walls and at 8 foot intervals. Rim tracks and strapping are also specified. A deck transition and curb stop are detailed. The floor area is 1320 square feet over 47 foot joists. A bill of materials is provided listing member sizes, materials, quantities and lengths.
Hotel Furdown Framing-Ceiling
This document contains bills of material for steel framing members including columns, beams, and joists of various lengths. It also includes an engineering drawing showing the layout of these members in Panel 6 including dimensions and member labels. The contractor is responsible for verifying all dimensions and ensuring local code compliance before installation.
Multi-System Materials Assembly
The document contains a list of structural steel components including HSS beams of varying sizes, as well as their lengths. It also includes project details like the project number, date, and drawings for high balcony conditions both interior and exterior views.
Hotel Furdown Framing
The document contains specifications for steel beams and columns for several building panels. It lists the member labels, quantities, types of steel members, and their lengths for 13 panels. The steel members include W362S125-18 columns and W362T100-18 beams. Drawings at various scales also show the layout of the steel frames for the panels.
Sample Unit Plan BIM Wall Layouts
The document contains a floor plan with dimensions for rooms, walls, doors, and other elements of three levels of a building unit. It includes labels and abbreviations for wall types, door and window schedules, and framing details. Dimensioned floor plans and schedules are provided for structural steel framing of load-bearing and non-load-bearing walls, along with calculated values for wall properties.
Balcony Wall Layout and Shear Walls
The document contains a list of structural elements with identifiers and dimensions. It includes columns, beams, and hold downs from levels 3 through 4 of a building. The columns and beams range in length from 8 3/4 inches to 127' 8" and are made of materials like 400S300-97. Hold downs like S/HD8S and S/HTT14 are specified to attach certain columns to concrete.
Sample Shear Walls
The document contains several tables listing members of a structural frame including their identifiers, quantities, lengths, and weights. The members include steel columns, beams, and trusses of varying sizes. Each table lists the members that make up different portions of the overall frame structure.
4830 vulcraft steel deck
This document provides technical product information for Vulcraft steel joists and decking. It includes dimensions, section properties, and specifications for various roof, floor, and composite deck profiles. Manufacturing locations and contact information are also listed. The document appears to be a catalog or specification guide for Vulcraft steel products.
Sample Wall Shop Drawings
This document provides details for the construction of a cold-formed steel framed structure. It includes general notes, material specifications, job site requirements, and panel assembly instructions. The general notes specify the scope, referenced standards, and responsibilities of designers and installers. Material specifications define the steel sheet, studs, tracks and other components to be used. Job site requirements address delivery, handling, storage, field modifications and repairs. Panel assembly instructions provide the sequence and steps for setting up wall panels, tying sections together, and attaching the top plates.
Cold Formed Steel Truss Layout
AutoCAD truss layout of cold formed steel trusses. Package with layouts, cross sections and connection details.
Viewers also liked (10)
Recently uploaded
zOS Mainframe JES2-JES3 JCL-JECL Differences
Document which explains the difference between Jes2 and Jes3
Preparing Non - Technical Founders for Engaging a Tech Agency
Preparing non-technical founders before engaging a tech agency is crucial for the success of their projects. It starts with clearly defining their vision and goals, conducting thorough market research, and gaining a basic understanding of relevant technologies. Setting realistic expectations and preparing a detailed project brief are essential steps. Founders should select a tech agency with a proven track record and establish clear communication channels. Additionally, addressing legal and contractual considerations and planning for post-launch support are vital to ensure a smooth and successful collaboration. This preparation empowers non-technical founders to effectively communicate their needs and work seamlessly with their chosen tech agency.Visit our site to get more details about this. Contact us today www.ishtechnologies.com.au
Everything You Need to Know About X-Sign: The eSign Functionality of XfilesPr...
Wondering how X-Sign gained popularity in a quick time span? This eSign functionality of XfilesPro DocuPrime has many advancements to offer for Salesforce users. Explore them now!
UI5con 2024 - Keynote: Latest News about UI5 and it’s Ecosystem
Learn about the latest innovations in and around OpenUI5/SAPUI5: UI5 Tooling, UI5 linter, UI5 Web Components, Web Components Integration, UI5 2.x, UI5 GenAI.
Recording:
https://www.youtube.com/live/MSdGLG2zLy8?si=INxBHTqkwHhxV5Ta&t=0
Artificia Intellicence and XPath Extension Functions
The purpose of this presentation is to provide an overview of how you can use AI from XSLT, XQuery, Schematron, or XML Refactoring operations, the potential benefits of using AI, and some of the challenges we face.
J-Spring 2024 - Going serverless with Quarkus, GraalVM native images and AWS ...
Presented at NLJUG's J-Spring 2024.
GreenCode-A-VSCode-Plugin--Dario-Jurisic
Presentation about a VSCode plugin from Dario Jurisic at the GSD Community Stage meetup
How to write a program in any programming language
How to write a program in any programming language
UI5con 2024 - Boost Your Development Experience with UI5 Tooling Extensions
The UI5 tooling is the development and build tooling of UI5. It is built in a modular and extensible way so that it can be easily extended by your needs. This session will showcase various tooling extensions which can boost your development experience by far so that you can really work offline, transpile your code in your project to use even newer versions of EcmaScript (than 2022 which is supported right now by the UI5 tooling), consume any npm package of your choice in your project, using different kind of proxies, and even stitching UI5 projects during development together to mimic your target environment.
Top Benefits of Using Salesforce Healthcare CRM for Patient Management.pdf
Salesforce Healthcare CRM, implemented by VALiNTRY360, revolutionizes patient management by enhancing patient engagement, streamlining administrative processes, and improving care coordination. Its advanced analytics, robust security, and seamless integration with telehealth services ensure that healthcare providers can deliver personalized, efficient, and secure patient care. By automating routine tasks and providing actionable insights, Salesforce Healthcare CRM enables healthcare providers to focus on delivering high-quality care, leading to better patient outcomes and higher satisfaction. VALiNTRY360's expertise ensures a tailored solution that meets the unique needs of any healthcare practice, from small clinics to large hospital systems.
For more info visit us https://valintry360.com/solutions/health-life-sciences
The Key to Digital Success_ A Comprehensive Guide to Continuous Testing Integ...
In today's business landscape, digital integration is ubiquitous, demanding swift innovation as a necessity rather than a luxury. In a fiercely competitive market with heightened customer expectations, the timely launch of flawless digital products is crucial for both acquisition and retention—any delay risks ceding market share to competitors.
WWDC 2024 Keynote Review: For CocoaCoders Austin
Overview of WWDC 2024 Keynote Address.
Covers: Apple Intelligence, iOS18, macOS Sequoia, iPadOS, watchOS, visionOS, and Apple TV+.
Understandable dialogue on Apple TV+
On-device app controlling AI.
Access to ChatGPT with a guest appearance by Chief Data Thief Sam Altman!
App Locking! iPhone Mirroring! And a Calculator!!
Unveiling the Advantages of Agile Software Development.pdf
Learn about Agile Software Development's advantages. Simplify your workflow to spur quicker innovation. Jump right in! We have also discussed the advantages.
What next after learning python programming basics
What next after learning python programming basics
一比一原版(USF毕业证)旧金山大学毕业证如何办理
USF硕士毕业证成绩单【微信95270640】一比一伪造旧金山大学文凭@假冒USF毕业证成绩单+Q微信95270640办理USF学位证书@仿造USF毕业文凭证书@购买旧金山大学毕业证成绩单USF真实使馆认证/真实留信认证回国人员证明
#一整套旧金山大学文凭证件办理#—包含旧金山大学旧金山大学本科毕业证成绩单学历认证|使馆认证|归国人员证明|教育部认证|留信网认证永远存档教育部学历学位认证查询办理国外文凭国外学历学位认证#我们提供全套办理服务。
一整套留学文凭证件服务：
一：旧金山大学旧金山大学本科毕业证成绩单毕业证 #成绩单等全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站永久可查
四：留信认证留学生信息网站永久可查
国外毕业证学位证成绩单办理方法：
1客户提供办理旧金山大学旧金山大学本科毕业证成绩单信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
教育部文凭学历认证认证的用途：
如果您计划在国内发展那么办理国内教育部认证是必不可少的。事业性用人单位如银行国企公务员在您应聘时都会需要您提供这个认证。其他私营 #外企企业无需提供！办理教育部认证所需资料众多且烦琐所有材料您都必须提供原件我们凭借丰富的经验帮您快速整合材料让您少走弯路。
实体公司专业为您服务如有需要请联系我: 微信95270640奈一次次令他失望山娃今年岁上五年级识得很多字从走出小屋开始山娃就知道父亲的家和工地共有一个很动听的名字——天河工地的底层空空荡荡很宽阔很凉爽在地上铺上报纸和水泥袋父亲和工人们中午全睡在地上地面坑坑洼洼山娃曾多次绊倒过也曾有长铁钉穿透凉鞋刺在脚板上但山娃不怕工地上也常有五六个从乡下来的小学生他们的父母亲也是高楼上的建筑工人小伙伴来自不同省份都操着带有浓重口音的普通话可不知为啥山娃不仅很快与他们熟识了
原版定制美国纽约州立大学奥尔巴尼分校毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国纽约州立大学奥尔巴尼分校毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
ALGIT - Assembly Line for Green IT - Numbers, Data, Facts
Presentation from Ghazal Aakel and Eric Jochum at the GSD Community Stage Meetup on June 6th, 2024
Using Query Store in Azure PostgreSQL to Understand Query Performance
Microsoft has added an excellent new extension in PostgreSQL on their Azure Platform. This session, presented at Posette 2024, covers what Query Store is and the types of information you can get out of it.
How Can Hiring A Mobile App Development Company Help Your Business Grow?
ToXSL Technologies is an award-winning Mobile App Development Company in Dubai that helps businesses reshape their digital possibilities with custom app services. As a top app development company in Dubai, we offer highly engaging iOS & Android app solutions. https://rb.gy/necdnt
Hand Rolled Applicative User Validation Code Kata
Could you use a simple piece of Scala validation code (granted, a very simplistic one too!) that you can rewrite, now and again, to refresh your basic understanding of Applicative operators <*>, <*, *>?
The goal is not to write perfect code showcasing validation, but rather, to provide a small, rough-and ready exercise to reinforce your muscle-memory.
Despite its grandiose-sounding title, this deck consists of just three slides showing the Scala 3 code to be rewritten whenever the details of the operators begin to fade away.
The code is my rough and ready translation of a Haskell user-validation program found in a book called Finding Success (and Failure) in Haskell - Fall in love with applicative functors.
Recently uploaded (20)
Preparing Non - Technical Founders for Engaging a Tech Agency
Preparing Non - Technical Founders for Engaging a Tech Agency
Everything You Need to Know About X-Sign: The eSign Functionality of XfilesPr...
Everything You Need to Know About X-Sign: The eSign Functionality of XfilesPr...
UI5con 2024 - Keynote: Latest News about UI5 and it’s Ecosystem
UI5con 2024 - Keynote: Latest News about UI5 and it’s Ecosystem
Artificia Intellicence and XPath Extension Functions
Artificia Intellicence and XPath Extension Functions
J-Spring 2024 - Going serverless with Quarkus, GraalVM native images and AWS ...
J-Spring 2024 - Going serverless with Quarkus, GraalVM native images and AWS ...
How to write a program in any programming language
How to write a program in any programming language
UI5con 2024 - Boost Your Development Experience with UI5 Tooling Extensions
UI5con 2024 - Boost Your Development Experience with UI5 Tooling Extensions
Top Benefits of Using Salesforce Healthcare CRM for Patient Management.pdf
Top Benefits of Using Salesforce Healthcare CRM for Patient Management.pdf
The Key to Digital Success_ A Comprehensive Guide to Continuous Testing Integ...
The Key to Digital Success_ A Comprehensive Guide to Continuous Testing Integ...
Unveiling the Advantages of Agile Software Development.pdf
Unveiling the Advantages of Agile Software Development.pdf
What next after learning python programming basics
What next after learning python programming basics
ALGIT - Assembly Line for Green IT - Numbers, Data, Facts
ALGIT - Assembly Line for Green IT - Numbers, Data, Facts
Using Query Store in Azure PostgreSQL to Understand Query Performance
Using Query Store in Azure PostgreSQL to Understand Query Performance
How Can Hiring A Mobile App Development Company Help Your Business Grow?
How Can Hiring A Mobile App Development Company Help Your Business Grow?
Revit BIM Color Coded Unit Modeling
- 1. S S 6" FURRDOWN AT COLUMNS PARKING DECK LEVEL 1 (ABOVE) 1ExtLB-1-Z1 1IntLB-2-Z1 1IntLB-3-Z1 1IntLB-4-Z1 2ExtNLB-1-Z 2CorLB-2-Z2CorLB-1-Z 2IntLB-1-Z 2IntLB-4-Z 2IntLB-3-Z 2IntLB-2-Z 1IntLB-1-Z1 1CorLB-1-Z1CorLB-2-Z1 Panel1 AC-1 AC-3 AC-1 AC-2 1DEM-12DEM-1 1DEM-22DEM-2 WIC-1 WIC-3 WIC-2 WIC-1 WIC-3 WIC-2 Bath-1Bath-1 1Entry-12Entry-1 WH-1 WH-2 Bath-1 WH-1 WH-2 Entry-2 Entry-2 Entry-2 Entry-2 IntNLB-2-Z IntNLB-1-Z IntNLB-3-Z IntNLB-2-Z IntNLB-1-Z IntNLB-3-Z 1ExtLB-1-Z1 1IntLB-2-Z1 1IntLB-3-Z1 1IntLB-4-Z1 2ExtNLB-1-Z 2CorLB-2-Z 2CorLB-1-Z 2IntLB-1-Z 2IntLB-4-Z 2IntLB-3-Z 2IntLB-2-Z 1IntLB-1-Z1 1CorLB-1-Z1CorLB-2-Z1 Panel1 AC-1 AC-3 AC-1 AC-2 1DEM-12DEM-1 1DEM-22DEM-2 WIC-1 WIC-3 WIC-2 WIC-1 WIC-3 WIC-2 Bath-1Bath-1 1Entry-12Entry-1 WH-1 WH-2 Bath-1 WH-1 WH-2 Entry-2 Entry-2 Entry-2 Entry-2 IntNLB-2-Z IntNLB-1-Z IntNLB-3-Z IntNLB-2-Z IntNLB-1-Z IntNLB-3-Z 1ExtLB-1-Z1 1IntLB-2-Z1 1IntLB-3-Z1 1IntLB-4-Z1 2ExtNLB-1-Z 2CorLB-2-Z 2CorLB-1-Z 2IntLB-1-Z 2IntLB-4-Z 2IntLB-3-Z 2IntLB-2-Z 1IntLB-1-Z1 1CorLB-1-Z1CorLB-2-Z1 Panel1 AC-1 AC-3 AC-1 AC-2 1DEM-12DEM-1 1DEM-22DEM-2 WIC-1 WIC-3 WIC-2 WIC-1 WIC-3 WIC-2 Bath-1Bath-1 1Entry-12Entry-1 WH-1 WH-2 Bath-1 WH-1 WH-2 Entry-2 Entry-2 Entry-2 Entry-2 IntNLB-2-Z IntNLB-1-Z IntNLB-3-Z IntNLB-2-Z IntNLB-1-Z IntNLB-3-Z Scale ProjectNumber: DateDrawnby:Size D STEEL Drawingnumber Reviewby: TRANSCON THEDRAWINGSHEREINAREMANUFACTURINGDRAWINGSONLY. CONTRACTORSHALLBESOLELYRESPONSIBLEFORVERIFYINGALL DIMENSIONS,SITECONDITIONS,ANDTHATALLSTATEANDLOCAL CODEREQUIREMENTSAREMET.PLEASECONTACTTRANSCONSTEEL FORANYADDITIONALCLARITYINNEEDEDPRIORTOINSTALLATION. FRAMING THE FUTURE PO Box 28192 Austin, TX 78755 512-642-3989 office 512-777-5987 fax www.TransconSteel.com Sales@TransconSteel.com RevisionInformation: 3/32"=1'-0" A101 BldgA_ColorCode ProjectNumber ProjectName 11/05/14 Author Enteraddresshere Checker 11/05/14 3/32" = 1'-0" 1 1 - Unit Plan - Callout 1 2 3D Building