1. The PointBeam™ 2400 smart multibeam array addresses
global fixed wireless needs. Using Wireless Online’s
patented SeRFiT™, Spectrum Reuse and Filtering
Technology, Pointbeam 2400 supports the ISM bands and
networks operating between 2.3 and 2.6 GHz—delivering
better coverage and capacity and reducing radio frequency
interference, while using fewer sites than conventional
systems. PointBeam 2400 supports fast, scalable and
affordable network growth by providing the ability to
reuse frequencies multiple times at a single site.
SmartWaves forWireless Data™
Fixed broadband networks are experiencing explosive
growth worldwide. The significant increase in interference
caused by multiple applications attempting to share the
same spectrum further complicates this rapid growth by
reducing service quality—posing challenges for the
network operator. Wireless Online’s smart wireless
equipment addresses both the explosive growth and the
troublesome radio frequency interference by utilizing smart
multibeam antenna technologies.
Proven Coverage and Capacity Improvements
Using Fewer Sites
Wireless Online’s PointBeam 2400 provides fixed wireless
broadband network operators with better coverage and
capacity using fewer cell sites.
• 1.5 times the coverage area for each cell site
• 6 times the capacity over conventional
sectored solutions
• Proven performance—demonstrated in
commercial deployments
PointBeam 2400
Unlicensed,WCS,andMMDSFrequencies
POINTBEAM2400
0
2.000
4,000
6,000
8,000
10,000
12,000
NumberofSubscribersperSite*
*Comparison based on coverage and capacity of an omni
antenna, 60¡ sectored antenna, 30¡ Yagi antenna and a Wireless
Online PointBeam 2400 multibeam antenna operating at 256
kbps throughput assuming current state of the art equipment.
PointBeam2400
30DegreeYagiAntenna
60DegreeSectoredAntenna
OmniAntenna

2. Modular,Scalable Equipment
• 1 to 6 channels available per 90° sector,
providing the ability to scale with subscriber growth
• Time capital equipment purchases with capacity
requirements
Smart Installation and Alignment
• Save up to 30 feet in tower/rooftop space, reducing
leasing costs
• Save installation time by installing one array rather
than many antennas per sector
• Reduce required permits by implementing fewer sites
• Reduce time-to-market by obtaining faster site
approval
Proven Increases in Signal Quality
• Reduce interference by up to 85% using narrow beams
• Maximize signal quality using our low side lobes
• Improve signal-to-noise ratio by 10 to 12 dB
SPECIFICATIONS
Performance Characteristics
Frequency Band 2.3–2.6 GHz
Gain 18.0 dBi,Typical
Side Lobe Rejection >15 dB
Front/Back Isolation >21 dB
SectorWidth 90°
Beams per Sector 1/2/3/6
Two 90° beams (optional)
Azimuth Beamwidth Typical 90°/ 45°/ 30°/ 15°
Elevation Beamwidth Typical 13°
Polarization Vertical,
other configurations available
VSWR 1.7:1,Maximum
Maximum Input Power 1Watt CW/Beam
Physical Characteristics
Weight 13 lbs.
5.9 kg.
Size 25.5"H X 25.7"W X 3.375" D
648 mm x 653 mm x 85 mm
Connectors Type N,Female,6 each
Environmental Specifications
Temperature -40°C to +60°C
Humidity 0–100% Condensing
WindTolerance 125 mph
Lightning Tested to 6,000 Amps
Azimuth Pattern, 2.44 GHz
Angle (degrees)
-20
-15
-10
-5
0
5
10
15
20
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90
L2 L1 R1 R2 R3
Amplitude(dB)
L3
POINTBEAM2400
©2001 Wireless Online, Inc. All rights reserved. PointBeam, SeRFiT, and
Smart Waves for Wireless Data are trademarks of Wireless Online, Inc.
Other trademarks are the property of their respective owners. All
statements and specifications are known to be true and accurate at time
of publication and are subject to change without notice.info@wireless-online.com • www.wireless-online.com