This document provides instructions for connecting to a remote computer called ClusterDesktop using various methods:
1. VNC connection: allows connection using a VNC client like iSSH by opening the VNC port and entering login credentials.
2. RDP connection: similarly allows connection through the RDP port using a client like iSSH.
3. SCP connection: permits secure file transfer through SFTP or FTP by opening the SCP port and entering login credentials.
4. NoVNC connection: provides browser-based access through the noVNC port without installing additional software but may be slower.
The document provides instructions for installing and configuring the Cisco VPN Client on a Windows system to enable remote access to internal networks and applications. It involves running an installation executable, accepting license agreements, creating a new connection entry with provided authentication credentials, and connecting to verify access using ping commands. Key steps include installing prerequisite software, inserting the VPN Client CD, entering login information, and checking connectivity to internal mail, application, and proxy servers once authenticated.
To install Demontool, run the setup file and click through the installation prompts, agreeing to the license and choosing not to install optional software. Follow instructions for another file to use Demontool to mount a game CD image and complete the installation.
ClusterDesktop how-to install on computer with LinuxEmil Parashkevov
This document provides step-by-step instructions to install and configure ClusterDesktop on a Linux system. It describes downloading and running the ClusterDesktop installer, setting permissions and passwords, enabling autostart, and optionally installing additional services like OpenSSH, RDP, and FTP for remote access. Restarting is required after making configuration changes. Once started, ClusterDesktop runs in the background and its window displays the IP address and ports needed to remotely access the system.
The document provides instructions for installing VMWare Player by copying the contents of the VMWare CD to the hard drive, running the VMWare installation executable, and clicking through the installation wizard by selecting "Next" until reaching the "Install" button. It further details clicking "Finish" once installation is complete and verifying the VMWare Player icon is on the desktop, thus completing the installation process.
This document provides instructions for connecting to a remote computer called ClusterDesktop using various methods: VNC, RDP, SSH, and noVNC. It explains how to open the necessary ports, download and install the required software like VNC Viewer or Remote Desktop, and then enter the server address and port to establish the connection. The methods allow accessing and transferring files on the remote computer from a local device.
The document provides instructions for importing an Open Ecosystem VMWare appliance. It instructs the user to copy the CD contents to their hard drive, open the "4. Import Open Ecosystem VMWare Appliance" directory, extract the "OpenEcosystemAppliance.zip" file using WinZip, and verify the extracted "OpenEcosystemAppliance" directory contents.
This document provides instructions for connecting to a remote computer called ClusterDesktop using various methods:
1. VNC connection: allows connection using a VNC client like iSSH by opening the VNC port and entering login credentials.
2. RDP connection: similarly allows connection through the RDP port using a client like iSSH.
3. SCP connection: permits secure file transfer through SFTP or FTP by opening the SCP port and entering login credentials.
4. NoVNC connection: provides browser-based access through the noVNC port without installing additional software but may be slower.
The document provides instructions for installing and configuring the Cisco VPN Client on a Windows system to enable remote access to internal networks and applications. It involves running an installation executable, accepting license agreements, creating a new connection entry with provided authentication credentials, and connecting to verify access using ping commands. Key steps include installing prerequisite software, inserting the VPN Client CD, entering login information, and checking connectivity to internal mail, application, and proxy servers once authenticated.
To install Demontool, run the setup file and click through the installation prompts, agreeing to the license and choosing not to install optional software. Follow instructions for another file to use Demontool to mount a game CD image and complete the installation.
ClusterDesktop how-to install on computer with LinuxEmil Parashkevov
This document provides step-by-step instructions to install and configure ClusterDesktop on a Linux system. It describes downloading and running the ClusterDesktop installer, setting permissions and passwords, enabling autostart, and optionally installing additional services like OpenSSH, RDP, and FTP for remote access. Restarting is required after making configuration changes. Once started, ClusterDesktop runs in the background and its window displays the IP address and ports needed to remotely access the system.
The document provides instructions for installing VMWare Player by copying the contents of the VMWare CD to the hard drive, running the VMWare installation executable, and clicking through the installation wizard by selecting "Next" until reaching the "Install" button. It further details clicking "Finish" once installation is complete and verifying the VMWare Player icon is on the desktop, thus completing the installation process.
This document provides instructions for connecting to a remote computer called ClusterDesktop using various methods: VNC, RDP, SSH, and noVNC. It explains how to open the necessary ports, download and install the required software like VNC Viewer or Remote Desktop, and then enter the server address and port to establish the connection. The methods allow accessing and transferring files on the remote computer from a local device.
The document provides instructions for importing an Open Ecosystem VMWare appliance. It instructs the user to copy the CD contents to their hard drive, open the "4. Import Open Ecosystem VMWare Appliance" directory, extract the "OpenEcosystemAppliance.zip" file using WinZip, and verify the extracted "OpenEcosystemAppliance" directory contents.
To connect to a remote computer using ClusterDesktop, you must first download and install the ClusterDesktop client software for your operating system. Then, check that the VNC port is open on your account. You can use the Jump VNC client to manually connect by entering the server address, port number, and VNC password. Finally, click login to remotely access the computer through a standard VNC connection.
Nwtc seminar overview of the impact of turbulence on turbine dynamics and t...ndkelley
Overview of the impact of atmospheric turbulence on wind turbine dynamics and its simulation based on 20 years of research at the National Renewable Energy Laboratory
ClusterDesktop manual how-to use for Linux clientsEmil Parashkevov
This document provides instructions for connecting to a remote computer hosted on ClusterDesktop using various methods: VNC, RDP, SSH, SCP, noVNC. The methods involve installing Remmina or other VNC/RDP clients, configuring connections, and supplying credentials to access the remote desktop or transfer files between local and remote systems.
This document provides tips for organizing information and writing a report or paper. It recommends first determining the purpose and type of document. Key steps include asking who, what, when, where, why and how questions to guide research. Notes should be taken neatly and include the source, and information sorted into labeled groups with main and supporting ideas. The writing process involves choosing a supporting idea for each paragraph and adding a bibliography citing all sources alphabetically. Staying organized throughout the research and writing is emphasized.
The stable atmospheric boundary layer a challenge for wind turbine operatio...ndkelley
An overview presentation of the impact and challenge of the stable atmospheric boundary layer on wind turbine dynamics presented to AGU Fall Meeting 2008
Nwtc seminar overview of the impact of turbulence on turbine dynamics, sept...ndkelley
Overview presentation on the impact of atmospheric turbulence on the dynamic response of wind turbines derived from 20 years of research at the National Renewable Energy Laboratory.
Nwtc turb sim workshop september 22 24, 2008- site specific modelsndkelley
1) The document describes several inflow turbulence models available in the TurbSim code developed by NREL, including models based on standard IEC conditions, smooth homogeneous terrain, specific wind farm sites, complex mountainous terrain, and a North American high plains site.
2) Comparisons of simulation results using the IEC, Great Plains, and NWTC models show differences in predicted blade loads, rotor torque, bending moments and tip deflections when applied to the NREL 5 MW reference turbine.
3) In particular, the Great Plains model including a low-level jet produced significantly higher loads and deflections compared to the standard IEC model, demonstrating the importance of using site-specific models.
Engineering challenges for future wind energy development, 11th h.t. person l...ndkelley
The document discusses engineering challenges for future wind energy development. It outlines goals of providing 20% of US electricity from wind by 2030, but barriers like transmission, resource assessment accuracy, and turbine response to turbulence must be overcome. Key challenges are understanding turbulence's impact on turbine loads, collaborating with meteorologists on wind forecasts, and developing offshore wind platforms and solutions for the complex offshore environment. Success will require a multidisciplinary approach across engineering and atmospheric science.
Using time frequency and wavelet analysis to assess turbulence-rotor interact...ndkelley
This document discusses using time-frequency and wavelet analysis to assess turbulence/rotor interactions. It analyzes turbine response data using techniques like the continuous wavelet transform and multiresolution decomposition to better understand how transient turbulent events excite turbine modal responses and influence loading. The analyses show that coherent turbulent structures containing a range of frequencies can excite a broadband aeroelastic response in turbines. Load peaks often occur when constituent modal responses are in phase. The first and second symmetric and asymmetric rotor modes appear most susceptible to excitation from turbulent eddies with space scales less than a quarter of the rotor diameter.
Comparing pulse doppler lidar with sodar and direct measurements for wind ass...ndkelley
The document compares wind measurements from a pulsed Doppler LIDAR, SODAR, and direct tower measurements taken during a field study. It finds that under optimal conditions, the LIDAR achieved a root mean square accuracy of 0.3 m/s or 2.5% compared to tower measurements, while SODAR measurements had a root mean square uncertainty of 0.6-0.7 m/s or 5-6% limited by tower flow distortion. Vertical wind profiles measured by the LIDAR's conical scanning mode provided detailed wind data, but initial vertical profiles from stationary scans showed larger errors compared to tower measurements.
The Football Research Group at Linköping University studied injuries in the UEFA Champions League over 13 seasons from 2001-2014. They collected data from over 100 teams across 18 countries and 18,000 injuries. Their studies found that hamstring, adductor, quadriceps and calf muscle injuries were most common, accounting for over 90% of injuries. MRI imaging was valuable in grading hamstring injuries and prognosticating return to play times, with more severe injuries indicated by MRI features like edema and architectural distortion linked to longer lay-offs. While overall injury rates have not decreased, ligament injuries have reduced by 31% from 2001-2012. Keeping star players available and avoiding overuse through fixture congestion are keys to team performance and
The document provides instructions for connecting to a remote computer called ClusterDesktop using different connection methods such as VNC, RDP, SCP, and noVNC. It explains how to install the necessary software, configure port settings, and establish connections using apps like Jump, Remote Ripple, ConnectBot, and ES File Explorer. The summary also covers playing audio/video files remotely and streaming media directly from the computer using VLC media player over an FTP connection.
The document provides step-by-step instructions to install ClusterDesktop on a Mac. It involves registering for a ClusterDesktop account, downloading the installer file, entering login credentials, and configuring the system to automatically launch ClusterDesktop on startup. The process includes accepting the terms of service, unlocking login options, running the installer script from the Terminal, saving a startup script with login details, and adding it to the Login Items so ClusterDesktop launches each time the computer restarts.
To use ClusterDesktop, register as a new user on their website and login. This will allow remote access to your computer via four ports: VNC, RDP, SCP, and noVNC. You can change passwords and configure the number of concurrent connections. If connections fail, troubleshoot by restarting ports or resetting firewall rules. Remote access is available using noVNC, VNC Java, IE RDP, or RDP Java in the browser. Alternatively, use FireFTP or JFTP to transfer files between local and remote systems over SCP. Tutorials provide additional guidance on installation and use.
This document provides a checklist for building an MS Windows Server 2008 machine. It outlines 14 high-level steps: 1) Prepare required paperwork; 2) Configure hardware or virtual machine; 3) Prepare the server environment; 4) Install Windows Server OS; 5) Customize the desktop and power settings; 6) Configure core server settings; 7) Install necessary agents and add-ons; and 8) Mark the build complete upon installing required VMware or hardware tools. It also provides additional pages of detailed instructions for each step.
ClusterDesktop manual how-to use for windows clientsEmil Parashkevov
This document provides instructions for connecting to a remote computer called ClusterDesktop using four different methods: VNC, RDP, SCP, or noVNC. It describes how to install the necessary software, check that the required ports are open, and enter the correct server address and port number to establish each type of connection. The goal is to work remotely on the computer that has ClusterDesktop installed in order to transfer files or access the desktop remotely.
This document provides step-by-step instructions for installing a CentOS 7 virtual machine using VirtualBox. It describes downloading VirtualBox and the CentOS 7 ISO, creating a new virtual machine, configuring storage, network, and shared folders, installing CentOS 7, setting the root password and creating a user, installing updates and desktop packages, and launching the GNOME desktop environment. The instructions also cover inserting guest additions and restarting to enable full mouse and screen functionality in the virtual machine.
ClusterDesktop manual how-to use for windows clientsEmil Parashkevov
This document provides instructions for connecting to and transferring files with a remote desktop called ClusterDesktop using various methods:
1. VNC clients like TightVNC to connect by inputting server and port divided by "::" into the "Remote Host" section.
2. Remote Desktop Connection on Windows by typing "mstsc" in Run and inputting server and port.
3. SCP connections using Jftp, FireFTP or WinSCP by inputting server, port, and credentials in the connection section and navigating filesystems to transfer files between areas.
4. NoVNC HTML5 connection by inputting server, port and optional password on the NoVNC page.
ClusterDesktop how-to transfer sound on your remote deviceEmil Parashkevov
This document provides instructions for using ClusterDesktop to remotely access and control your computer. It describes setting up audio and video streaming using VLC media player and an FTP connection. The steps include installing ClusterDesktop, configuring port forwarding and audio settings, and starting a video stream that can be accessed from another device using a VLC media URL.
To connect to a remote computer using ClusterDesktop, you must first download and install the ClusterDesktop client software for your operating system. Then, check that the VNC port is open on your account. You can use the Jump VNC client to manually connect by entering the server address, port number, and VNC password. Finally, click login to remotely access the computer through a standard VNC connection.
Nwtc seminar overview of the impact of turbulence on turbine dynamics and t...ndkelley
Overview of the impact of atmospheric turbulence on wind turbine dynamics and its simulation based on 20 years of research at the National Renewable Energy Laboratory
ClusterDesktop manual how-to use for Linux clientsEmil Parashkevov
This document provides instructions for connecting to a remote computer hosted on ClusterDesktop using various methods: VNC, RDP, SSH, SCP, noVNC. The methods involve installing Remmina or other VNC/RDP clients, configuring connections, and supplying credentials to access the remote desktop or transfer files between local and remote systems.
This document provides tips for organizing information and writing a report or paper. It recommends first determining the purpose and type of document. Key steps include asking who, what, when, where, why and how questions to guide research. Notes should be taken neatly and include the source, and information sorted into labeled groups with main and supporting ideas. The writing process involves choosing a supporting idea for each paragraph and adding a bibliography citing all sources alphabetically. Staying organized throughout the research and writing is emphasized.
The stable atmospheric boundary layer a challenge for wind turbine operatio...ndkelley
An overview presentation of the impact and challenge of the stable atmospheric boundary layer on wind turbine dynamics presented to AGU Fall Meeting 2008
Nwtc seminar overview of the impact of turbulence on turbine dynamics, sept...ndkelley
Overview presentation on the impact of atmospheric turbulence on the dynamic response of wind turbines derived from 20 years of research at the National Renewable Energy Laboratory.
Nwtc turb sim workshop september 22 24, 2008- site specific modelsndkelley
1) The document describes several inflow turbulence models available in the TurbSim code developed by NREL, including models based on standard IEC conditions, smooth homogeneous terrain, specific wind farm sites, complex mountainous terrain, and a North American high plains site.
2) Comparisons of simulation results using the IEC, Great Plains, and NWTC models show differences in predicted blade loads, rotor torque, bending moments and tip deflections when applied to the NREL 5 MW reference turbine.
3) In particular, the Great Plains model including a low-level jet produced significantly higher loads and deflections compared to the standard IEC model, demonstrating the importance of using site-specific models.
Engineering challenges for future wind energy development, 11th h.t. person l...ndkelley
The document discusses engineering challenges for future wind energy development. It outlines goals of providing 20% of US electricity from wind by 2030, but barriers like transmission, resource assessment accuracy, and turbine response to turbulence must be overcome. Key challenges are understanding turbulence's impact on turbine loads, collaborating with meteorologists on wind forecasts, and developing offshore wind platforms and solutions for the complex offshore environment. Success will require a multidisciplinary approach across engineering and atmospheric science.
Using time frequency and wavelet analysis to assess turbulence-rotor interact...ndkelley
This document discusses using time-frequency and wavelet analysis to assess turbulence/rotor interactions. It analyzes turbine response data using techniques like the continuous wavelet transform and multiresolution decomposition to better understand how transient turbulent events excite turbine modal responses and influence loading. The analyses show that coherent turbulent structures containing a range of frequencies can excite a broadband aeroelastic response in turbines. Load peaks often occur when constituent modal responses are in phase. The first and second symmetric and asymmetric rotor modes appear most susceptible to excitation from turbulent eddies with space scales less than a quarter of the rotor diameter.
Comparing pulse doppler lidar with sodar and direct measurements for wind ass...ndkelley
The document compares wind measurements from a pulsed Doppler LIDAR, SODAR, and direct tower measurements taken during a field study. It finds that under optimal conditions, the LIDAR achieved a root mean square accuracy of 0.3 m/s or 2.5% compared to tower measurements, while SODAR measurements had a root mean square uncertainty of 0.6-0.7 m/s or 5-6% limited by tower flow distortion. Vertical wind profiles measured by the LIDAR's conical scanning mode provided detailed wind data, but initial vertical profiles from stationary scans showed larger errors compared to tower measurements.
The Football Research Group at Linköping University studied injuries in the UEFA Champions League over 13 seasons from 2001-2014. They collected data from over 100 teams across 18 countries and 18,000 injuries. Their studies found that hamstring, adductor, quadriceps and calf muscle injuries were most common, accounting for over 90% of injuries. MRI imaging was valuable in grading hamstring injuries and prognosticating return to play times, with more severe injuries indicated by MRI features like edema and architectural distortion linked to longer lay-offs. While overall injury rates have not decreased, ligament injuries have reduced by 31% from 2001-2012. Keeping star players available and avoiding overuse through fixture congestion are keys to team performance and
The document provides instructions for connecting to a remote computer called ClusterDesktop using different connection methods such as VNC, RDP, SCP, and noVNC. It explains how to install the necessary software, configure port settings, and establish connections using apps like Jump, Remote Ripple, ConnectBot, and ES File Explorer. The summary also covers playing audio/video files remotely and streaming media directly from the computer using VLC media player over an FTP connection.
The document provides step-by-step instructions to install ClusterDesktop on a Mac. It involves registering for a ClusterDesktop account, downloading the installer file, entering login credentials, and configuring the system to automatically launch ClusterDesktop on startup. The process includes accepting the terms of service, unlocking login options, running the installer script from the Terminal, saving a startup script with login details, and adding it to the Login Items so ClusterDesktop launches each time the computer restarts.
To use ClusterDesktop, register as a new user on their website and login. This will allow remote access to your computer via four ports: VNC, RDP, SCP, and noVNC. You can change passwords and configure the number of concurrent connections. If connections fail, troubleshoot by restarting ports or resetting firewall rules. Remote access is available using noVNC, VNC Java, IE RDP, or RDP Java in the browser. Alternatively, use FireFTP or JFTP to transfer files between local and remote systems over SCP. Tutorials provide additional guidance on installation and use.
This document provides a checklist for building an MS Windows Server 2008 machine. It outlines 14 high-level steps: 1) Prepare required paperwork; 2) Configure hardware or virtual machine; 3) Prepare the server environment; 4) Install Windows Server OS; 5) Customize the desktop and power settings; 6) Configure core server settings; 7) Install necessary agents and add-ons; and 8) Mark the build complete upon installing required VMware or hardware tools. It also provides additional pages of detailed instructions for each step.
ClusterDesktop manual how-to use for windows clientsEmil Parashkevov
This document provides instructions for connecting to a remote computer called ClusterDesktop using four different methods: VNC, RDP, SCP, or noVNC. It describes how to install the necessary software, check that the required ports are open, and enter the correct server address and port number to establish each type of connection. The goal is to work remotely on the computer that has ClusterDesktop installed in order to transfer files or access the desktop remotely.
This document provides step-by-step instructions for installing a CentOS 7 virtual machine using VirtualBox. It describes downloading VirtualBox and the CentOS 7 ISO, creating a new virtual machine, configuring storage, network, and shared folders, installing CentOS 7, setting the root password and creating a user, installing updates and desktop packages, and launching the GNOME desktop environment. The instructions also cover inserting guest additions and restarting to enable full mouse and screen functionality in the virtual machine.
ClusterDesktop manual how-to use for windows clientsEmil Parashkevov
This document provides instructions for connecting to and transferring files with a remote desktop called ClusterDesktop using various methods:
1. VNC clients like TightVNC to connect by inputting server and port divided by "::" into the "Remote Host" section.
2. Remote Desktop Connection on Windows by typing "mstsc" in Run and inputting server and port.
3. SCP connections using Jftp, FireFTP or WinSCP by inputting server, port, and credentials in the connection section and navigating filesystems to transfer files between areas.
4. NoVNC HTML5 connection by inputting server, port and optional password on the NoVNC page.
ClusterDesktop how-to transfer sound on your remote deviceEmil Parashkevov
This document provides instructions for using ClusterDesktop to remotely access and control your computer. It describes setting up audio and video streaming using VLC media player and an FTP connection. The steps include installing ClusterDesktop, configuring port forwarding and audio settings, and starting a video stream that can be accessed from another device using a VLC media URL.
This document provides instructions for using ClusterDesktop to remotely access and control your computer. It describes setting up audio and video streaming using VLC and FTP by connecting an audio cable from the audio output to microphone input ports. It also details setting up a Secure Copy Protocol (SCP) connection in ConnectBot by entering login credentials and port number. Instructions are given for configuring port forwarding and audio capture settings in VLC on Windows and Linux/Mac systems to enable audio streaming between the remote and local computers.
The document provides installation instructions for Octopus, a database software, in 6 steps:
1. Install the database engine (SQL Server 2005 Express Edition), database administration tool (SQL Server Management Studio Express), Octopus client software, and Crystal Reports for Octopus.
2. Configure the Octopus connection by specifying the server, database name, username (sa), and password set during SQL Server installation.
3. Launch Octopus and log in with default username (admin) and password (admin) to access the blank database.
This document provides instructions for installing the Verimatrix client in order to access live channels and video on demand from the PTCL Smart TV service on www.smarttv.com.pk using a PC or laptop. The instructions include downloading and running the Verimatrix client setup file, completing the installation process, and making some additional tweaks for the Chrome browser if the client continues to prompt for installation.
This document outlines the step-by-step procedures for installing and configuring the Project CAMSUR Attendance System. It describes downloading and installing required software packages like Wampserver, MySQL, and the Project CAMSUR application itself. It also details how to set a password for the MySQL database, restore backup data, and configure the connection between the Project CAMSUR system and the MySQL database using the MySQL Connector.
SafePeak - How to manually configure SafePeak ClusterVladi Vexler
This document provides instructions for manually configuring a SafePeak active-passive cluster by installing SafePeak on two servers in single mode, installing the Windows NLB feature, configuring NLB on both servers with a virtual IP address, and configuring SafePeak MySQL databases and licenses on each server to enable synchronization and failover functionality.
This document provides instructions for using ClusterDesktop to remotely access and control your computer. It describes setting up audio and video streaming using VLC media player and FTP by directly streaming files from the remote computer. The steps include installing ClusterDesktop, setting up port forwarding and audio cable connections, configuring ConnectBot with the remote computer credentials and port, and starting a stream in VLC on both the local and remote computers.
1) The document provides step-by-step instructions for downloading and installing MySQL community server on a Windows PC. It describes downloading the MySQL installer from the official website and selecting the appropriate installer package for online or offline installation.
2) The steps include running the installer, selecting options to install all requirements, setting the root password, and configuring the standard MySQL server. Additional optional configurations like the router are described.
3) Finally, it verifies that MySQL has been successfully installed by opening the MySQL shell and checking the details of the installed package.
A Manual for Setting up a WordPress Website on the Local Linux Server with Va...Yuji Shimojo
This document provides instructions for setting up a WordPress website on a local Linux server using Vagrant in 12 steps. It covers creating a virtual machine with Vagrant, installing and configuring Apache, PHP, MySQL, downloading WordPress and deploying it on the server, and creating posts with images on the new WordPress site. The goal is to have a fully functioning local WordPress development environment for testing and editing sites.
This document provides step-by-step instructions for installing CentOS 7 on a virtual machine. It describes pressing a key to begin installation, selecting a language, configuring installation destination and partitioning, setting up networking using DHCP, creating a root user and optional additional user, finishing installation, and rebooting. Upon first login, the document recommends verifying the IP address and disk configuration.
The document provides instructions for setting up and using a VIVOTEK network camera test lab. It includes chapters on preparation, installation, using the Installation Wizard 2 software, camera configuration, and using the ST7501 client/server software. Some key points:
- Chapter 1 discusses necessary lab components and how to connect the camera.
- Chapter 2 covers installing the Installation Wizard 2 and ST7501 software, including selecting installation directories and options.
- Chapter 3 describes the Installation Wizard 2 user interface and how it analyzes the network environment.
- Chapter 4 provides steps for configuring camera cropping through the viewing window page to define the region of interest and output frame size.
Nuxeo DM can be installed on computers with Java 6 by downloading the package from nuxeo.com, running the installer, and accessing the home page at http://localhost:8080/nuxeo with the default credentials. The document provides step-by-step instructions for installing Nuxeo DM on Windows, including selecting installation options and directories and configuring the database. It also describes how to run Nuxeo DM from a zip archive by using the nuxeoctl command in the bin directory.
Net scaler installation and configurationbimalkishore4
The document provides step-by-step instructions for installing and configuring NetScaler ADC VPX 10.1, including uploading the VPX to XenServer, configuring the NetScaler, installing an SSL certificate, setting up the NetScaler Gateway virtual server, installing the Web Interface on NetScaler, and configuring the NetScaler to redirect to the Web Interface. Key steps include downloading the NetScaler VPX and Web Interface components, configuring networking settings on the NetScaler, uploading and installing an SSL certificate from a CA, creating an LDAP server and policy for authentication, and customizing the Web Interface site appearance.
Similar to ClusterDesktop and VPN or how-to create a VPN network between ClusterDesktop users (20)
Discover the benefits of outsourcing SEO to Indiadavidjhones387
"Discover the benefits of outsourcing SEO to India! From cost-effective services and expert professionals to round-the-clock work advantages, learn how your business can achieve digital success with Indian SEO solutions.
Ready to Unlock the Power of Blockchain!Toptal Tech
Imagine a world where data flows freely, yet remains secure. A world where trust is built into the fabric of every transaction. This is the promise of blockchain, a revolutionary technology poised to reshape our digital landscape.
Toptal Tech is at the forefront of this innovation, connecting you with the brightest minds in blockchain development. Together, we can unlock the potential of this transformative technology, building a future of transparency, security, and endless possibilities.
HijackLoader Evolution: Interactive Process HollowingDonato Onofri
CrowdStrike researchers have identified a HijackLoader (aka IDAT Loader) sample that employs sophisticated evasion techniques to enhance the complexity of the threat. HijackLoader, an increasingly popular tool among adversaries for deploying additional payloads and tooling, continues to evolve as its developers experiment and enhance its capabilities.
In their analysis of a recent HijackLoader sample, CrowdStrike researchers discovered new techniques designed to increase the defense evasion capabilities of the loader. The malware developer used a standard process hollowing technique coupled with an additional trigger that was activated by the parent process writing to a pipe. This new approach, called "Interactive Process Hollowing", has the potential to make defense evasion stealthier.
ClusterDesktop and VPN or how-to create a VPN network between ClusterDesktop users
1. How to install ClusterDesktop
ClusterDesktop
1. Go to https://www.clusterdesktop.com/
2. Click on “Register new user”
3. Fill the blank fields and press “Register user”,
4. Login to your account
5. Click to download ClusterDesktop
2. 6.On ClusterDesktop Terms of Service scroll down to the end
of the document and click “Accept all”
ClusterDesktop
7. Save file cd.exe
How to install ClusterDesktop
3. 8. Run file cd.exe
➢ If you want to use ClusterDesktop Graphical User
Interface type gui and press Enter
➢ If you want to use ClusterDesktop Console User
Interface type con and press Enter
ClusterDesktop
How to install ClusterDesktop
4. ClusterDesktop
How to install ClusterDesktop
8.1 Install ClusterDesktop with Graphical User Interface
➢ Type your username and password
➢ Check „Install ClusterDesktop as service in order to start
with your computer“
➢ Click “Go“
5. ➢ Set up as shown in the picture below
ClusterDesktop
How to install ClusterDesktopHow to install ClusterDesktop
6. ➢ Click Yes to add the necessary
for ClusterDesktop rules to
your Firewall
ClusterDesktop
How to install ClusterDesktopHow to install ClusterDesktop
8.2 Install ClusterDesktop with Console User Interface
➢ Type your username and press Enter
➢ Type your password and press Enter
➢ Type yes and press Enter on „Do you want to install
ClusterDesktop as service in order to start with your
computer“
7. ClusterDesktop
How to install ClusterDesktopHow to install ClusterDesktop
➢ Type Yes and press Enter
to add the necessary for
ClusterDesktop rules to your
Firewall
8. ➢ Set up as shown in the picture below
ClusterDesktop
How to install ClusterDesktopHow to install ClusterDesktop
9. ClusterDesktop
How to start VPN Server
I. Add VPN server to ClucterDesktop from Graphical User
Interface
1. To add VPN server set up as shown in the picture below
10. ClusterDesktop
How to start VPN Server
II. Add VPN server to ClucterDesktop from Console User
Interface
1. To add VPN server type “vpns” and press Enter as shown
in the picture below
2. Type „restart“ and press Enter
11. 1. Follow the installation by
clicking “Next”
ClusterDesktop
How to start VPN Server
2. Double click on “localost”
III. Install and set up VPN Server
12. ClusterDesktop
How to start VPN Server
3. Set up as shown in the picture
4. Check “Remote Access
VPN Server” and click
“Next”
29. 29. Save and exit the file
ClusterDesktop
How to start VPN Server
30. Open the Configuration file
30. ClusterDesktop
How to start VPN Server
31. Click “OK“
32. Click “OK“
33. Open „SoftEther VPN Server
Manager“ and you are ready to use
your VPN Server
31. ClusterDesktop
How to start VPN Client
I. Add VPN client to ClucterDesktop from Graphical User
Interface
1. To add VPN client set up as shown in the picture below
32. ClusterDesktop
How to start VPN Client
II. Add VPN client to ClucterDesktop from Console User
Interface
1. To add VPN client type “vpnc” and press Enter set up as
shown in the picture below
2. Type „restart“ and press Enter
33. ClusterDesktop
How to start VPN Client
I. Install and set up VPN Client
1. Set up KiTTY
➢ Set up “Session” as shown
in the pictures
34. ClusterDesktop
How to start VPN Client
➢ Set up as shown in the
picture
1 Type the username from
your computer on which is
installed ClusterDesktop with
VPN server.
2 Type the password for the
username from (1).
38. ClusterDesktop
How to start VPN Client
2. Install VPN Client
➢ Follow the installation by
clicking “Next”
3. Set up VPN Client
➢ When you see this message
click „Yes“
40. ClusterDesktop
How to start VPN Client
➢ Type name for your Virtual
Network adapter and click
“OK”
➢ Double click on „Add
VPN Connection“
41. ClusterDesktop
How to start VPN Client
➢ Set up as shown in the picture below
1 Set up name
2 Type localhost
3 Type port 55555
4 Select “Virtual Hub Name” from the dropdown menu or
type the name of the, "Virtual Hub", that you defined when
installing the VPN server
5 Type user name created on your VPN Server
6 Type the password for your VPN user
7 „Reconnects Automatically After Disconnected“ must
be checked