Thomson Linear RoundRail 1VC Continuously Supported SpecsElectromate
This document provides specifications for various FluoroNyliner linear guide systems with double continuous support, including:
- Dimensions and part numbers for linear guides, pillow blocks, shaft support rails, and table tops in various sizes
- Maximum operating parameters for the FluoroNyliner bearings
- Benefits of the linear guide systems which provide rigidity for continuously supported applications
- Information on specifying and ordering replacement parts
This document provides specifications for various FluoroNyliner linear guide systems with double continuous support, including:
- Dimensions and part numbers for linear guides, pillow blocks, shaft support rails, and table tops in various sizes
- Maximum operating parameters for the FluoroNyliner bearings
- Benefits of the linear guide systems which provide rigidity for continuously supported applications
- Information on specifying and ordering replacement parts
This document provides an analysis of Tesla's UBQ01B0 chip used for full self-driving capabilities. It includes a physical analysis of the die and packaging, an overview of the manufacturing process, and a cost analysis. The chip is a system-on-chip designed and produced by Tesla to power its driver-assist and autonomous driving features. It utilizes quad-core ARM processors alongside a GPU and NPU for processing sensor data and neural network operations. The analysis examines the chip's design and architecture at the physical, manufacturing, and cost levels.
Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-50 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.
https://www.n-denkei.com/singapore/inquiry/
Thomson Linear RoundRail 1VC Double Unsupported SpecsElectromate
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Two-party operation is recommended when using high voltages and proper precautions should always be taken to avoid electrical shock. The Baker DX and associated devices are only intended for indoor use and appropriate safety equipment like gloves and eye protection should be worn. Emergency stop buttons are provided on the Baker DX and accessories to quickly discontinue testing in unsafe situations.
Lawson Fuses - power safe solutions
BSI, IEC & CENELEC Standard Fuses
Lawson low voltage fuses provide reliable circuit protection : general purpose fuses, industrial fuses, IEC fuses, street lighting fuses, motor circuit fuses, compact dimension fuses, utility fuses and DIN standard fuses.
Lawson Fuses - Ranges Available :
Industrial Fuse Links - Lawson industrial fuse link range complies with the dimensional requirements and current ratings of BS88 : Part 2 and IEC60269-2. 400/415V and 660/690V a.c. industrial fuses are available.
Compact Dimension Fuse Links - Lawson compact dimension fuse links with offset blade tags meet the requirements of BS88 : Part 6 and IEC60269-2 at rated voltages 230/240V and 400/415V a.c.
Motor Circuit Fuse Links - Lawson motor circuit fuse links accomodate the starting current of motors providing reliable circuit protection.
Utility Fuse Links - Lawson utility fuse links for electricity supply networks comply with BS88 : Part 5.
Semi Conductor Fuse Links - Lawson high speed fuse links for the protection of semi-conductor devices (240V and 690V) comply with the performance and dimensional requirements of BS88.
DIN Specification Fuse Links - Lawson 500V NH fuse links are manufactured in accordance with DIN 43 620.
Are you IEC61439 ready?
Compliance with the new standard will be compulsory once this standard supersede AS/NZS 3439 series. All assemblies must be shown to meet minimum safety and performance standards by design and routine verification. Many of the alternatives to type testing rely on interpolation from a tested reference design.
Thomson Linear RoundRail 1VC Continuously Supported SpecsElectromate
This document provides specifications for various FluoroNyliner linear guide systems with double continuous support, including:
- Dimensions and part numbers for linear guides, pillow blocks, shaft support rails, and table tops in various sizes
- Maximum operating parameters for the FluoroNyliner bearings
- Benefits of the linear guide systems which provide rigidity for continuously supported applications
- Information on specifying and ordering replacement parts
This document provides specifications for various FluoroNyliner linear guide systems with double continuous support, including:
- Dimensions and part numbers for linear guides, pillow blocks, shaft support rails, and table tops in various sizes
- Maximum operating parameters for the FluoroNyliner bearings
- Benefits of the linear guide systems which provide rigidity for continuously supported applications
- Information on specifying and ordering replacement parts
This document provides an analysis of Tesla's UBQ01B0 chip used for full self-driving capabilities. It includes a physical analysis of the die and packaging, an overview of the manufacturing process, and a cost analysis. The chip is a system-on-chip designed and produced by Tesla to power its driver-assist and autonomous driving features. It utilizes quad-core ARM processors alongside a GPU and NPU for processing sensor data and neural network operations. The analysis examines the chip's design and architecture at the physical, manufacturing, and cost levels.
Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-50 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.
https://www.n-denkei.com/singapore/inquiry/
Thomson Linear RoundRail 1VC Double Unsupported SpecsElectromate
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Two-party operation is recommended when using high voltages and proper precautions should always be taken to avoid electrical shock. The Baker DX and associated devices are only intended for indoor use and appropriate safety equipment like gloves and eye protection should be worn. Emergency stop buttons are provided on the Baker DX and accessories to quickly discontinue testing in unsafe situations.
Lawson Fuses - power safe solutions
BSI, IEC & CENELEC Standard Fuses
Lawson low voltage fuses provide reliable circuit protection : general purpose fuses, industrial fuses, IEC fuses, street lighting fuses, motor circuit fuses, compact dimension fuses, utility fuses and DIN standard fuses.
Lawson Fuses - Ranges Available :
Industrial Fuse Links - Lawson industrial fuse link range complies with the dimensional requirements and current ratings of BS88 : Part 2 and IEC60269-2. 400/415V and 660/690V a.c. industrial fuses are available.
Compact Dimension Fuse Links - Lawson compact dimension fuse links with offset blade tags meet the requirements of BS88 : Part 6 and IEC60269-2 at rated voltages 230/240V and 400/415V a.c.
Motor Circuit Fuse Links - Lawson motor circuit fuse links accomodate the starting current of motors providing reliable circuit protection.
Utility Fuse Links - Lawson utility fuse links for electricity supply networks comply with BS88 : Part 5.
Semi Conductor Fuse Links - Lawson high speed fuse links for the protection of semi-conductor devices (240V and 690V) comply with the performance and dimensional requirements of BS88.
DIN Specification Fuse Links - Lawson 500V NH fuse links are manufactured in accordance with DIN 43 620.
Are you IEC61439 ready?
Compliance with the new standard will be compulsory once this standard supersede AS/NZS 3439 series. All assemblies must be shown to meet minimum safety and performance standards by design and routine verification. Many of the alternatives to type testing rely on interpolation from a tested reference design.
The document provides a quality engineering development summary with updates from February 2011. It includes:
- An introduction of the quality assurance organization chart and jobs/responsibilities.
- Summaries of processes like quality alerts, defect potential assessments, customer complaints, audits, and design of experiments that were conducted from July 2010 to February 2011.
- Details of customer issues, investigations conducted, root cause analysis and corrective actions implemented in response to issues from customers like Skyworks, Sitime, Elmos, Maxim and Melexis.
- Information about training provided on problem solving techniques and other quality topics.
So in summary, the document outlines the quality processes, customer issues addressed, and trainings
Thomson Linear Dual Shaft Rail 2DA Modular SpecsElectromate
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
This document provides specifications and diagrams for Thomson Industries dual shaft rail linear guides with modular carriages. It includes dimensions, part numbers, load ratings and limits for various guide sizes. The guides use pre-aligned dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. Maximum continuous rail length is 72 inches.
This document provides information on low voltage consumer units and distribution boards, including:
1) The Comby and Housemaster consumer unit ranges which are designed for safety, reliability, and availability in electrical building installations.
2) Distribution boards including the Protecta compact TP+N busbar type boards and multi-row EPA boards.
3) Technical specifications, ordering details, and application information for the different product lines.
Perfect Engineers is an Indian company established in 1988 that manufactures quick-release couplings and valves. It provides products in materials like carbon steel, stainless steel, brass, and others. The document includes details on the company's product range, materials, specifications, dimensions, and applications for various quick connectors, ball valves, needle valves, and other components. It also provides guidelines for safe handling of hydraulic quick couplers.
AUTOSPOOL is an automatic piping spooling software, used for generating piping Fabrication, Erection Isometrics & related reports. Which is based on the convenience of Fabrication / Erection work, site requirements, spool transportability. To achieve the best international construction practices and clients requirement standard. This software generates the Fabrication / Erection construction scope in Inch Dia, Inch Meter and tonnage. It also calculates piping cut length, piping bending length, spool weight and surface area as required in the project.
AUTOSPOOL is a part of EPCPROMAN SUITE
2009 kawasaki kx65 a9 service repair manualfhjsekkemm
The document provides model application information for a KX65 motorcycle from 2000-2014. It lists the model year, model name, and beginning frame number for each year's model. The last line notes that the digit in the frame number changes from one machine to another. The document provides identification information to distinguish between different model years and frames.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
The document provides a quality engineering development summary with updates from February 2011. It includes:
- An introduction of the quality assurance organization chart and jobs/responsibilities.
- Summaries of processes like quality alerts, defect potential assessments, customer complaints, audits, and design of experiments that were conducted from July 2010 to February 2011.
- Details of customer issues, investigations conducted, root cause analysis and corrective actions implemented in response to issues from customers like Skyworks, Sitime, Elmos, Maxim and Melexis.
- Information about training provided on problem solving techniques and other quality topics.
So in summary, the document outlines the quality processes, customer issues addressed, and trainings
Thomson Linear Dual Shaft Rail 2DA Modular SpecsElectromate
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
This document provides specifications and diagrams for Thomson Industries dual shaft rail linear guides with modular carriages. It includes dimensions, part numbers, load ratings and limits for various guide sizes. The guides use pre-aligned dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. Maximum continuous rail length is 72 inches.
This document provides information on low voltage consumer units and distribution boards, including:
1) The Comby and Housemaster consumer unit ranges which are designed for safety, reliability, and availability in electrical building installations.
2) Distribution boards including the Protecta compact TP+N busbar type boards and multi-row EPA boards.
3) Technical specifications, ordering details, and application information for the different product lines.
Perfect Engineers is an Indian company established in 1988 that manufactures quick-release couplings and valves. It provides products in materials like carbon steel, stainless steel, brass, and others. The document includes details on the company's product range, materials, specifications, dimensions, and applications for various quick connectors, ball valves, needle valves, and other components. It also provides guidelines for safe handling of hydraulic quick couplers.
AUTOSPOOL is an automatic piping spooling software, used for generating piping Fabrication, Erection Isometrics & related reports. Which is based on the convenience of Fabrication / Erection work, site requirements, spool transportability. To achieve the best international construction practices and clients requirement standard. This software generates the Fabrication / Erection construction scope in Inch Dia, Inch Meter and tonnage. It also calculates piping cut length, piping bending length, spool weight and surface area as required in the project.
AUTOSPOOL is a part of EPCPROMAN SUITE
2009 kawasaki kx65 a9 service repair manualfhjsekkemm
The document provides model application information for a KX65 motorcycle from 2000-2014. It lists the model year, model name, and beginning frame number for each year's model. The last line notes that the digit in the frame number changes from one machine to another. The document provides identification information to distinguish between different model years and frames.
Similar to 2022 Quality Control & Document Design (7)
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
2. QUALITY CONTROL DOCUMENTS
Documents containing extensive data (checklists, carbon reflector specifications
etc.) were created with Microsoft Excel. Quality Alert and instructional documents
containing numerous photographs and annotations were created using Microsoft
PowerPoint. Standard Practice documents for use in-house and externally for
suppliers / vendors were created with Microsoft Word.
Information contained in the enclosed documents is proprietary and is included
to showcase my organizational, design, writing and photography skills. Some
changes have been made to the original documents to protect proprietary
processes and data. Additional documents are available by request.
AvL Technologies in Asheville, North Carolina is the major manufacturer of
satellite antenna positioning units in the United States. Leading clients for the
company include; branches of the armed forces, many agencies within Federal &
State governments and satellite news gathering organizations such as CNN and
ESPN. The following documents are a small representative sample of work I
created while I was with the company.
- Ben Walters / Asheville, NC
3. 1. Assembly Instructions
a) Standard Practices Manual – basic across the board procedures
covering everything from metal preparation, to wiring and painting
b) Supplier / Vendor Standard Practices – supplied to vendors to insure
compliance with AVL standards and reduce the amount of rejected
material
c) Unit Assembly Instructions – unit family specific instructions covering
sub assemblies and final assemblies
2. Unit Checklists
a) Unit Checklists - the cornerstone of quality control for each
manufactured unit
3. Quality Alerts & Job Procedures
a) Quality Alerts - when issues cropped up, Quality Alerts were issued to
each relevant department detailing concerns and the procedures for
rectifying those problems
b) Job Procedures - usually related to manufacturing sub assemblies.
Both Quality Alerts and Job Procedures would be incorporated into
successive revisions of the Unit Assembly Instructions
Documents created fall under six broad categories;
4. 4. End User Material
a) Quick Start Guides – guides for quickly getting a satellite
antenna positioner up in the field, deploying it and locking onto
a satellite signal
b) Case Unit Photographs – laminated photographs showing
proper storage of components in their respective cases
c) Field Repair Procedures – generated for specific clients in
remote areas to direct the repair of satellite antenna positioner
units
5. Data Repositories and Test Results
a) Reflector Data Master – contained test results for all reflector
dishes generated used a Faro Laser Tracker
b) Environmental Test Results – collected data from heat and
load tests of various carbon fiber composites and reflector
configurations
6. Miscellaneous Documents
a) Timesheets
b) Parts requisition forms
c) Labels and signage
5. Sample Software Usage Instructions
These procedures were illustrated using a combination of
screen captures and digital photographs (for image quality,
where more screen detail was needed). They are used as
an adjunct to hands-on training.
17. AvL
Technologies Quality Alert
Distribution:
Operations Manufacturing Mfg. Engineering Assembly Paint
2.0 Meter reflector’s should be numbered as above (clockwise),
as viewed from the back of the reflector. Painted numbers are
placed between the center hub and the seams of the reflector
petals.
2.0 Meter Sectional Reflector Numbering
QA Number: QA-0049
Issue Date: 1/27/06
Expires: 2/27/06
Issued By: B WALTERS
AvL
1
2
3
4
5
6
7
8
18. AvL
Technologies Quality Alert
Distribution: Operations Manufacturing Mfg. Engineering Service Paint
Serial numbers for reflector petals, reflector hub, struts, feed
boom, feed horn & unit should be applied in the same place
and orientation on all 9066 units, except for the vendor specific
labels. Stow & deploy labels should be applied above buttons
as shown .
9066 Label Placement
QA Number: QA-0050B
Issue Date: 3/15/06
Expires: 4/15/06
Issued By: B WALTERS
12 point label 12 point label
12 point labels
P. 1
12 point label
Standard Serial Number Tag
on bottom of unit
GCS only!
Serial number
on front of base
plate
Strut serial
number faces
knurled collar
9 point label
GSI only!
20. DIE PLUG BALL
241-051-001-B EL D14 - 1.5 - .218 475S1250 1/8 13716 52 13/16 BA 3-4 <20 Ton
241-050-001-B AZ D14 - 1.5 - .218 475S1250 1/8 13716 53 13/16 BA 3-4 <20 Ton
240-042-001-A EL D14 - .281 478S1500 1/8 13716 74 1/4 BA 3-4 <20 Ton
240-041-001-A AZ D14 - 1.5 - .218 475S1250 1/8 13716 101 7/8 BA 3-4 <20 Ton
181-232-001 AZ D14 -1.5 - .218 475S1250 3/32 13715 75 1/2 BA 3-3 <20 Ton
180-027-003-B AZ D14 -1.5 - .218 475S1250 3/32 13715 60 1/16 BA 3-3 <20 Ton
180-027-001 EL D14 -1.5 - .218 475S1250 3/32 13715 54 9/16 BA 3-3 <20 Ton
128-037-001-A AZ D14 -1.5 - .218 475S1250 3/32 13715 45 3/8 BA 3-3 <20 Ton
128-311-501 D14- .156 A 465S1000 BA 3-2
123-317-301 D14- .156 A 465S1000 BA 3-2
120-072-001 D14- .156 A 465S1000 BA 3-2
075-512-302-A EL (casting) D14- .156 B 465S1000 5/64 13714 38 11/16 N/A N/A
075-512-302 EL (old) D14- .156 B 465S1000 5/64 13714 38 3/8 N/A N/A
127-032-301 POL D14- .156 B 465S1000 1/16 13712 33 3/4 BA 3-2 <20 Ton
120-058-001 AZ D14- .156 A 465S1000 1/16 13712 57 5/8 BA 3-2 <20 Ton
120-054-001 EL D14- .156 A 465S1000 1/16 13712 43 7/16 BA 3-2 <20 Ton
120-053-001 (270) AZ D14- .156 A 465S1000 1/16 13712 48 5/8 BA 3-2 <20 Ton
120-209-001 POL D14- .156 A 465S1000 1/16 13712 31 7/8 BA 3-2 <20 Ton
090-301-001 EL D14- .156 B 465S1000 1/16 13712 36 1/16 N/A N/A
077-125-301 POL D14- .156 B 465S1000 1/16 13712 20 9/16 BA 3-2 <20 Ton
077-124-301 AZ D14- .156 B 465S1000 1/16 13712 36 BA 3-2 <20 Ton
077-123-301 EL D14- .156 B 465S1000 1/16 13712 27 BA 3-2 N/A
075-512-303 POL D14- .156 B 465S1000 1/16 13712 24 3/8 N/A N/A
075-512-301 AZ D14- .156 B 465S1000 1/16 13712 62 7/8 BA 3-2 <20 Ton
075-218-301 EL D14- .156 B 465S1000 1/16 13712 31 15/16 N/A N/A
075-217-301 POL D14- .156 B 465S1000 1/16 13712 22 9/16 N/A N/A
075-216-301 AZ D14- .156 B 465S1000 1/16 13712 62 31/32 BA 3-2 <20 Ton
<20 Ton
Plug & Ball Machined
Open hole to
.078
Open hole to
.078
Cable Drawing
Number
CABLE
Part
Number
EL 5/64 13714 38 5/8
Hydraulic
Force To
Swage
Die Number
Length (")
Ball to Plug Edge
Diameter In
Inches
Part Number
Cable
Assembly Part Number
<20 Ton
Plug & Ball Machined
Open hole to
.089 (#43) x .46 DP
Open hole to
.089 (#43)
AZ 5/64 13714 64 3/4
<20 Ton
Plug & Ball Machined
Open hole to
.089 (#43) x .46 DP
Open hole to
.089 (#43)
EL 5/64 13714 38 3/4
Cable Swaging Chart Sample
Cable Swaging Chart contains parameters for the manufacturing of
stainless steel cables using 20 ton hydraulic press. Used in house for quality control.
21. Reflector Data Master Sample
The Reflector Data Master contains specific parameters for over 250
carbon fiber reflectors. All data collected and recorded using Faro Laser Tracker.
22. Unit Checklists are one of the major quality control measures used within the
company. They accompany each satellite antenna positioning unit during the
entire manufacturing process up through crating and shipping. The checklists
are used to highlight critical areas of concern and differences between similar
units of a particular family. They contain numerous redundancies and secondary
checks.
The checklists also reference the actual assembly instruction procedure for
each unit sub assembly and final assembly. All documentation including
checklists, testing sheets and serial numbers of critical parts were scanned after
the unit was shipped, creating a ready electronic reference file. This file aids in
field repairs and longevity studies for each positioner unit.
Unit Checklists
23.
24.
25. Sample Quick Start Guide
The 9066 unit is a suitcase sized solution for a satellite linkup. Many of these
units have been sold for use within the government agencies for
communications and homeland security purposes. Each unit can replace the
approximately 300 phone line connections and can be used logistically for a
traveling head of state or in disaster situations
26.
27.
28.
29.
30.
31.
32. End of document samples
All contents copyright
AvL Technologies & Ben Walters
benwalters.nc@gmail.com