2013 nissan pathfinder service repair manual

A
B
C
D
E
F
G
H
I
J
K
L
M
N
P
O
QUICK REFERENCE INDEX
A GENERAL INFORMATION GI General Information
B ENGINE EM Engine Mechanical
LU Engine Lubrication System
CO Engine Cooling System
EC Engine Control System
FL Fuel System
EX Exhaust System
STR Starting System
ACC Accelerator Control System
C HYBRID HBC Hybrid Control System
HBB Hybrid Battery System
HBR Hybrid Brake System
D TRANSMISSION & DRIVE-
LINE
TM Transaxle & Transmission
DLN Driveline
FAX Front Axle
RAX Rear Axle
E SUSPENSION FSU Front Suspension
RSU Rear Suspension
SCS Suspension Control System
WT Road Wheels & Tires
F BRAKES BR Brake System
PB Parking Brake System
BRC Brake Control System
G STEERING ST Steering System
STC Steering Control System
H RESTRAINTS SB Seat Belt
SBC Seat Belt Control System
SR SRS Airbag
SRC SRS Airbag Control System
I VENTILATION, HEATER &
AIR CONDITIONER
VTL Ventilation System
HA Heater & Air Conditioning System
HAC Heater & Air Conditioning Control System
J BODY INTERIOR INT Interior
IP Instrument Panel
SE Seat
ADP Automatic Drive Postioner
AP Adjustable Pedals
K BODY EXTERIOR,
DOORS, ROOF & VEHICLE
SECURITY
DLK Door & Lock
SEC Security Control System
GW Glass & Window System
PWC Power Window Control System
RF Roof
EXT Exterior
BRM Body Repair Manual
L DRIVER CONTROLS MIR Mirrors
EXL Exterior Lighting System
INL Interior Lighting System
WW Wiper & Washer
DEF Defogger
HRN Horn
M ELECTRICAL & POWER
CONTROL
PWO Power Outlet
BCS Body Control System
LAN LAN System
PCS Power Control System
CHG Charging System
PG Power Supply, Ground & Circuit Elements
N DRIVER INFORMATION &
MULTIMEDIA
MWI Meter, Warning Lamp & Indicator
WCS Warning Chime System
SN Sonar System
AV Audio, Visual & Navigation System
O CRUISE CONTROL CCS Cruise Control System
P MAINTENANCE MA Maintenance
All rights reserved. No part
of this Service Manual may
be reproduced or stored in a
retrieval system, or transmit-
ted in any form, or by any
means, electronic, mechani-
cal, photo-copying, record-
ing or otherwise, without the
prior written permission of
Nissan North America, Inc.
Edition: October 2012
Revision: October 2012
Publication No. SM3E-1R52U0

FOREWORD
This manual contains maintenance and repair procedure for the 2013
NISSAN PATHFINDER.
In order to assure your safety and the efficient functioning of the vehicle,
this manual should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.
All information in this manual is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi-
cations and methods at any time without notice.
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Service Manual are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service
method selected.

2013
QUICK REFERENCE CHART: PATHFINDER
Engine Tune-up Data INFOID:0000000009047446
GENERAL SPECIFICATIONS
Drive Belt INFOID:0000000009047447
DRIVE BELT
Cylinder arrangement V-6
Displacement cm3
(cu in) 3,498 (213.45)
Bore and stroke mm (in) 95.5 x 81.4 (3.760 x 3.205)
Valve arrangement DOHC
Firing order 1-2-3-4-5-6
Number of piston rings
Compression 2
Oil 1
Number of main bearings 4
Compression ratio 10.6:1
Compression pressure
kPa (kg/cm2
, psi)/300 rpm
Standard 1,275 (13.0, 185)
Minimum 981 (10.0, 142)
Differential limit between cylinders 98 (1.0, 14)
Cylinder number
Valve timing
(Valve timing control - “OFF”)
Unit: degree
a b c d e f
240 240 −10 70 10 50
SEM713A
PBIC0187E
Tension of drive belt Belt tension is not necessary, as it is automatically adjusted by drive belt auto-tensioner.

2013
Spark Plug INFOID:0000000009047448
SPARK PLUG
Unit: mm (in)
*: Always check with the Parts Department for the latest parts information.
Front Wheel Alignment INFOID:0000000009047445
UNITED STATES and MEXICO
Measure value under unladen conditions (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
*1: The (RH) camber angle shall be –0° 15′ ± 0° 33′ (0.25° ± 0.55°) with respect to the (LH) camber angle.
CANADA
Make DENSO
Standard type* FXE22HR11
Gap Standard 1.1 (0.043)
Item Standard
Measurement wheel (LH) side (RH) side
Camber
Degree minute (Decimal degree)
Minimum –1° 00′ (–1.00°) –1° 15′ (–1.25°)
Nominal –0° 15′ (–0.25°) –0° 30′ (–0.50°)
Maximum 0° 30′ (0.50°) 0° 15′ (0.25°)
Left and right difference*1 –0° 15′ ± 0° 33′ (0.25° ± 0.55°)
Caster
Minimum 3° 55′ (3.92°)
Nominal 4° 40′ (4.67°)
Maximum 5° 25′ (5.42°)
Left and right difference*1 0.30′ (0.50°) Maximum
Kingpin inclination
Minimum 11° 55′ (11.92°) 12° 10′ (12.17°)
Nominal 12° 40′ (12.67°) 12° 55′ (12.92°)
Maximum 13° 25′ (13.42°) 13° 40′ (13.67°)
Total toe-in
Distance (A - B)
Minimum Out 0.6 mm (Out 0.024 in)
Nominal In 1.4 mm (In 0.055 in)
Maximum In 3.4 mm (In 0.134 in)
Angle (left and right)
Degree minute
(Decimal degree)
Minimum Out 0° 3′ 36″ (Out 0.06°)
Nominal In 0° 6′ 14″ (In 0.10°)
Maximum In 0° 15′ 36″ (In 0.26°)
SFA234AC

2013
Measure value under unladen conditions. (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
*1: The (RH) camber angle shall be –0° 15′ ± 0° 33′ (0.25° ± 0.55°) with respect to the (LH) camber angle.
Rear Wheel Alignment INFOID:0000000009047443
UNITED STATES, CANADA, AND MEXICO
Item Standard
Measurement wheel (LH) side (RH) side
Camber
Minimum –1° 00′ (–1.00°) –1° 15′ (–1.25°)
Nominal –0° 15′ (–0.25°) –0° 30′ (–0.50°)
Maximum 0° 30′ (0.50°) 0° 15′ (0.25°)
Left and right difference*1 –0° 15′ ± 0° 33′ (0.25° ± 0.55°)
Caster
Minimum 4° 00′ (4.00°)
Nominal 4° 45′ (4.75°)
Maximum 5° 30′ (5.50°)
Left and right difference*1 0.30′ (0.50°) Maximum
Kingpin inclination
Minimum 11° 55′ (11.92°) 12° 10′ (12.17°)
Nominal 12° 40′ (12.67°) 12° 55′ (12.92°)
Maximum 13° 25′ (13.42°) 13° 40′ (13.67°)
Total toe-in
Distance (A - B)
Degree minute
(Decimal degree)
Minimum Out 0° 3′ 36″ (Out 0.06°)
Nominal In 0° 6′ 14″ (In 0.10°)
Maximum In 0° 15′ 36″ (In 0.26°)
SFA234AC
Item Standard
Camber
Minimum –1° 05′ (–1.08°)
Nominal –0° 35′ (–0.58°)
Maximum –0° 05′ (–0.08°)
SEIA0363E

2013
Measure value under unladen conditions (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions.
Wheelarch Height INFOID:0000000009047444
UNITED STATES
Unit: mm (in)
Measure value under unladen conditions. (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
CANADA
Unit: mm (in)
Measure value under unladen* conditions. (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
Total toe-in
Distance (A - B)
Degree minute
(Decimal degree)
Minimum Out 0° 2′ 24″ (Out 0.04°)
Nominal In 0° 9′ 36″ (In 0.16°)
Maximum In 0° 21′ 36″ (In 0.36°)
Item Standard
Axle type 2WD 4WD
Wheel size 235/65R18 235/55R20 235/65R18 235/55R20
Grade S, SV SL Platinum S, SV SL, Platinum
Front (Hf) 823 (32.40) 823 (32.40) 821 (32.32) 822 (32.36) 822 (32.36)
Rear (Hr) 828 (32.60) 827 (32.56) 825 (32.48) 827 (32.56) 826 (32.52)
LEIA0085E
Axle type 2WD 4WD
Wheel size 235/65R18 235/55R20
Grade S SL S SV SL Platinum
Front (Hf) 823 (32.40) 822 (32.36)
Rear (Hr) 829 (32.64) 828 (32.60) 827 (32.56)
LEIA0085E

2013
MEXICO
Unit: mm (in)
Measure value under unladen* conditions. (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
Brake Specifications INFOID:0000000009047441
Unit: mm (in)
Brake Pedal INFOID:0000000009047442
Unit: mm (in)
Front Disc Brake INFOID:0000000009047439
Unit: mm (in)
Axle type 2WD 4WD
Wheel size 235/65R18 235/55R20
Grade Sense Advance Exclusive Exclusive 4WD
Front (Hf) 823 (32.40) 821 (32.32)
Rear (Hf) 828 (32.60) 826 (32.52) 825 (32.48)
LEIA0085E
Front brake
Cylinder bore diameter 45.0 (1.772) × 2
Pad length × width × thickness 131.4 (5.17) × 55.5 (2.19) × 10.0 (0.39)
Rotor outer diameter × thickness 320.0 (12.60) × 28.0 (1.10)
Rear brake
Cylinder bore diameter 42.86 (1.6874)
Pad length × width × thickness 83.0 (3.27) × 32.0 (1.26) × 8.5 (0.33)
Rotor outer diameter × thickness 308 (12.13) × 16.0 (0.63)
Master cylinder Cylinder bore diameter 26.99 (1.063)
Control valve Valve type Electric brake force distribution
Item Standard
Brake pedal height (H1) 204 – 224 (8.03 – 8.82)
Clearance (A) between brake pedal bracket, stop lamp switch and ASCD cancel switch contact
ends
0.20 – 1.96 (0.0079 – 0.0772)
Depressed brake pedal height (H2)
[Depressing 490 N (50 kg, 110 lb) while turning the engine ON]
75.1 (2.96)
Item Limit
Brake pad Wear thickness 1.0 (0.04)
Disc rotor
Wear thickness 26.0 (1.02)
Thickness variation (measured at 8 positions) 0.008 (0.0003)
Runout (with disc rotor attached to the vehicle) 0.040 (0.0016) or less

2013
Rear Disc Brake INFOID:0000000009047440
Unit: mm (in)
FOR USA AND CANADA : Fluids and Lubricants INFOID:0000000009047433
FOR MEXICO : Fluids and Lubricants INFOID:0000000009047436
Item Limit
Brake pad Wear thickness 1.0 (0.04)
Disc rotor
Wear thickness 14.0 (0.55)
Thickness variation (measured at 8 positions) 0.020 (0.0008)
Runout (with disc rotor attached to the vehicle) 0.050 (0.0020) or less
Description
Capacity (Approximate)
Metric US measure Imp measure
Fuel 74.0 19-1/2 gal 16-1/4 gal
Engine oil
Drain and refill
With oil filter change 4.8 5-1/8 qt 4-1/4 qt
Without oil filter
change
4.5 4-3/4 qt 4 qt
Dry engine (Overhaul) 5.1 5-3/8 qt 4-1/2 qt
Cooling system
(with reservoir at MAX level)
9.8 10-3/8 qt 8-5/8 qt
CVT fluid 8.8 9-1/4 qt 7-3/4 qt
Differential gear oil Rear 0.5 1 pt 7/8 pt
Transfer fluid 0.31 5/8 pt 1/2 pt
Power steering fluid (PSF) — — —
Brake fluid — — —
Multi-purpose grease — — —
Windshield washer fluid 4.6 1-1/4 gal 1 gal
Air conditioning system refrigerant 0.85 ± 0.05 kg 1.87 ± 0.1 lb 1.87 ± 0.1 lb
Air conditioning system oil 180 m 6.1 fl oz 6.3 fl oz
Liter Imp measure
Fuel 74.0 16-1/4 gal
Engine oil
Drain and refill
With oil filter change 4.8 4-1/4 qt
Without oil filter change 4.5 4 qt
Dry engine (engine overhaul) 5.1 4-1/2 qt
Cooling system
(with reservoir at MAX level)
9.8 8-3/8 qt
Reservoir tank 0.8 3/4 qt
CVT fluid 8.2 7-1/4 qt
Differential gear oil Rear 0.55 1 pt

2013
Transfer oil
0.31 1/2 pt
Power steering fluid (PSF) — —
Brake fluid — —
Multi-purpose grease — —
Windshield washer fluid 4.6 1 gal
Air conditioning system refrigerant 0.85 ± 0.05 kg 1.87 ± 0.1 lb
Air conditioning system oil 180 m 6.3 fl oz
Liter Imp measure

GI-1
GENERAL INFORMATION
C
D
E
F
G
H
I
J
K
L
M
B
GI
SECTION GI
N
O
P
CONTENTS
GENERAL INFORMATION
HOW TO USE THIS MANUAL ..................
.... 3
HOW TO USE THIS MANUAL .......................
..... 3
Description ..........................................................
......3
Terms ..................................................................
......3
Units ....................................................................
......3
Contents ..............................................................
......3
Relation between Illustrations and Descriptions .
......4
Components ........................................................
......4
HOW TO FOLLOW TROUBLE DIAGNOSES..... 6
Description ..........................................................
......6
How to Follow Test Groups in Trouble Diagnosis......6
Key to Symbols Signifying Measurements or Pro-
cedures ...............................................................
......7
HOW TO READ WIRING DIAGRAMS ...........
..... 9
Connector Symbols .............................................
......9
Sample/Wiring Diagram -Example- .....................
....10
Connector Information .........................................
....12
ABBREVIATIONS ..........................................
....14
Abbreviation List ..................................................
....14
TIGHTENING TORQUE OF STANDARD
BOLTS ............................................................
....19
Description ..........................................................
....19
Tightening Torque Table (New Standard Includ-
ed) .......................................................................
....19
RECOMMENDED CHEMICAL PRODUCTS
AND SEALANTS ............................................
....22
Recommended Chemical Products and Sealants
....22
TERMINOLOGY .............................................
....23
SAE J1930 Terminology List ...............................
....23
VEHICLE INFORMATION .........................
...27
IDENTIFICATION INFORMATION .................
....27
Model Variation ...................................................
....27
Identification Number ..........................................
....28
Identification Plate ...............................................
....29
Engine Serial Number .........................................
....30
CVT Number ........................................................
....30
Dimensions ..........................................................
....30
Wheels & Tires ....................................................
....30
PRECAUTION ...........................................
...31
PRECAUTIONS .................................................31
Description ...........................................................
....31
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" .............................................................
....31
Precaution for Procedure without Cowl Top Cover
....31
Cautions in Removing Battery Terminal and AV
Control Unit ..........................................................
....31
General Precautions ............................................
....32
Three Way Catalyst .............................................
....33
Multiport Fuel Injection System or Engine Control
System .................................................................
....33
Hoses ..................................................................
....33
Engine Oils ..........................................................
....34
Air Conditioning ...................................................
....35
Fuel ......................................................................
....35
LIFTING POINT .................................................36
Special Service Tool ............................................
....36
Pantograph Jack ..................................................
....36
Garage Jack and Safety Stand ............................
....37
2-Pole Lift ............................................................
....38
TOW TRUCK TOWING .....................................39
Tow Truck Towing ...............................................
....39
Vehicle Recovery (Freeing a Stuck Vehicle) .......
....40
WIRING DIAGRAM ...................................
...42
CONSULT CHECKING SYSTEM .....................42
Wiring Diagram - With Around View Monitor .......
....42
Wiring Diagram - Without Around View Monitor ..
....44
BASIC INSPECTION ................................
...45
Revision: October 2012 2013 Pathfinder NAM

GI-2
SERVICE INFORMATION FOR ELECTRICAL
INCIDENT .......................................................
... 45
Work Flow ............................................................
... 45
Control Units and Electrical Parts ........................
... 45
How to Check Terminal .......................................
... 46
Intermittent Incident .............................................
... 49
Circuit Inspection .................................................
... 52
CONSULT CHECKING SYSTEM ...................
... 57
Description ...........................................................
... 57
CONSULT Function and System Application ......
... 57
CONSULT Data Link Connector (DLC) Circuit ....
... 57

HOW TO USE THIS MANUAL
GI-3
< HOW TO USE THIS MANUAL >
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
Description INFOID:0000000008509901
This volume explains “Removal, Disassembly, Installation, Inspection and Adjustment” and “Trouble Diag-
noses”.
Terms INFOID:0000000008509902
• The captions WARNING and CAUTION warn you of steps that must be followed to prevent personal injury
and/or damage to some part of the vehicle.
WARNING indicates the possibility of personal injury if instructions are not followed.
CAUTION indicates the possibility of component damage if instructions are not followed.
BOLD TYPED STATEMENTS except WARNING and CAUTION give you helpful information.
Standard value: Tolerance at inspection and adjustment.
Limit value: The maximum or minimum limit value that should not be exceeded at inspection and adjust-
ment.
Units INFOID:0000000008509903
• The UNITS given in this manual are primarily expressed as the SI UNIT (International System of Unit), and
alternatively expressed in the metric system and in the yard/pound system.
Also with regard to tightening torque of bolts and nuts, there are descriptions both about range and about the
standard tightening torque.
“Example”
Range
Standard
Contents INFOID:0000000008509904
• A QUICK REFERENCE INDEX, a black tab (e.g. ) is provided on the first page. You can quickly find the
first page of each section by matching it to the section's black tab.
• THE CONTENTS are listed on the first page of each section.
• THE TITLE is indicated on the upper portion of each page and shows the part or system.
• THE PAGE NUMBER of each section consists of two or three letters which designate the particular section
and a number (e.g. “BR-5”).
• THE SMALL ILLUSTRATIONS show the important steps such as inspection, use of special tools, knacks of
work and hidden or tricky steps which are not shown in the previous large illustrations.
Assembly, inspection and adjustment procedures for the complicated units such as the automatic transaxle
or transmission, etc. are presented in a step-by-step format where necessary.
Outer Socket Lock Nut : 59 - 78 N·m (6.0 - 8.0 kg-m, 43 - 58 ft-lb)
Drive Shaft Installation Bolt : 44.3 N·m (4.5 kg-m, 33 ft-lb)

GI-4
Relation between Illustrations and Descriptions INFOID:0000000008509905
The following sample explains the relationship between the part description in an illustration, the part name in
the text and the service procedures.
Components INFOID:0000000008509906
• THE LARGE ILLUSTRATIONS are exploded views (see the following) and contain tightening torques, lubri-
cation points, section number of the PARTS CATALOG (e.g. SEC. 440) and other information necessary to
perform repairs.
The illustrations should be used in reference to service matters only. When ordering parts, refer to the appro-
priate PARTS CATALOG.
Components shown in an illustration may be identified by a circled number. When this style of illustration is
used, the text description of the components will follow the illustration.
SAIA0519E

GI-5
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
SYMBOLS
1. Union bolt 2. Copper washer 3. Brake hose
4. Cap 5. Bleed valve 6. Sliding pin bolt
7. Piston seal 8. Piston 9. Piston boot
10. Cylinder body 11. Sliding pin 12. Torque member mounting bolt
13. Washer 14. Sliding pin boot 15. Bushing
16. Torque member 17. Inner shim cover 18. Inner shim
19. Inner pad 20. Pad retainer 21. Pad wear sensor
22. Outer pad 23. Outer shim 24. Outer shim cover
1: PBC (Poly Butyl Cuprysil) grease
or silicone-based grease
2: Rubber grease : Brake fluid
Refer to GI section for additional symbol definitions.
SFIA2959E
SAIA0749E

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

GI-6
HOW TO FOLLOW TROUBLE DIAGNOSES
Description INFOID:0000000008509907
NOTICE:
Trouble diagnoses indicate work procedures required to diagnose problems effectively. Observe the following
instructions before diagnosing.
• Before performing trouble diagnoses, read the “Work Flow” in each section.
• After repairs, re-check that the problem has been completely eliminated.
• Refer to Component Parts and Harness Connector Location for the Systems described in each section for
identification/location of components and harness connectors.
• When checking circuit continuity, ignition switch should be OFF.
• Refer to the Circuit Diagram for quick pinpoint check.
If you need to check circuit continuity between harness connectors in more detail, such as when a sub-har-
ness is used, refer to Wiring Diagram in each individual section and Harness Layout in PG section for identi-
fication of harness connectors.
• Before checking voltage at connectors, check battery voltage.
• After accomplishing the Diagnosis Procedures and Electrical Components Inspection, check that all harness
connectors are reconnected as they were.
How to Follow Test Groups in Trouble Diagnosis INFOID:0000000008509908
1. Test group number and test group title
• Test group number and test group title are shown in the upper portion of each test group.
2. Work and diagnosis procedure
• Start to diagnose a problem using procedures indicated in enclosed test groups.
3. Questions and results
• Questions and required results are indicated in test group.
4. Action
• Next action for each test group is indicated based on result of each question.
JPAIA0021GB

GI-7
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
Key to Symbols Signifying Measurements or Procedures INFOID:0000000008509909
JPAIA0397GB

GI-8
JSAIA1461GB

HOW TO READ WIRING DIAGRAMS
GI-9
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
Connector Symbols INFOID:0000000008509910
Most of connector symbols in wiring diagrams are shown from the terminal side.
• Connector symbols shown from the terminal side are enclosed by
a single line and followed by the direction mark.
• Connector symbols shown from the harness side are enclosed by
a double line and followed by the direction mark.
• Certain systems and components, especially those related to
OBD, may use a new style slide-locking type harness connector.
For description and how to disconnect, refer to PG section,
“Description”, “HARNESS CONNECTOR”.
• Male and female terminals
Connector guides for male terminals are shown in black and
female terminals in white in wiring diagrams.
SAIA0257E
SGI363

GI-10
Sample/Wiring Diagram -Example- INFOID:0000000008509911
Each section includes wiring diagrams.
Description
JCAWA0150GB
Number Item Description
1 Power supply • This means the power supply of fusible link or fuse.
2 Fuse • “/” means the fuse.
3
Current rating of fusible
link/fuse
• This means the current rating of the fusible link or fuse.
4
Number of fusible link/
fuse
• This means the number of fusible link or fuse location.
5 Fusible link • “X” means the fusible link.
6 Connector number
• Alphabetic characters show to which harness the connector is placed.
• Numeric characters show the identification number of connectors.
7 Switch
• This shows that continuity exists between terminals 1 and 2 when the switch is in the A posi-
tion. Continuity exists between terminals 1 and 3 when the switch is in the B position.
8 Circuit (Wiring) • This means the wiring.

2013 nissan pathfinder service repair manual

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to 2013 nissan pathfinder service repair manual

Similar to 2013 nissan pathfinder service repair manual (20)

More from jfkseksmemqw

More from jfkseksmemqw (20)

Recently uploaded

Recently uploaded (20)

2013 nissan pathfinder service repair manual