The document is a user manual for the 2746e thermal printer. It provides instructions on unpacking the printer, understanding the controls and indicators, installation, media loading, troubleshooting tips, operator maintenance, using optional accessories like a cutter, and print counters. Safety warnings are provided throughout regarding shock hazards, static discharge, printer handling, approved media types, and print quality.
This document provides an overview of features for the 2012 Chevrolet Tahoe/Suburban. It discusses the instrument panel, initial drive information such as remote keyless entry and remote vehicle start, door locks, liftgate, safety belts, mirror adjustment, steering wheel adjustment, pedal adjustment, interior and exterior lighting controls, climate controls, transmission, four-wheel drive, cruise control, navigation system, blind zone alert, rear vision camera, parking assist, power outlets, and universal remote system. It also briefly discusses the StabiliTrak stability control system and maintaining proper tire pressure.
This document provides a user's guide for the proLIGHT 2000 Machining Center control program software. It includes sections on installation of the hardware and software, overview of the control program interface and commands, tutorial on basic operation, descriptions of NC programming codes, optional machining capabilities, and maintenance of the machining center.
The document is the owner's manual for a 2012 Chevrolet Volt and provides information about the vehicle's instruments, controls, features, and operation. It includes sections on instrument panels, initial drive information, vehicle features, battery and efficiency, performance and maintenance, and more. The manual is intended to help owners understand and properly use all aspects of the Volt.
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
The document is a user manual for the 2746e thermal printer. It provides instructions on unpacking the printer, understanding the controls and indicators, installation, media loading, troubleshooting tips, operator maintenance, using optional accessories like a cutter, and print counters. Safety warnings are provided throughout regarding shock hazards, static discharge, printer handling, approved media types, and print quality.
This document provides an overview of features for the 2012 Chevrolet Tahoe/Suburban. It discusses the instrument panel, initial drive information such as remote keyless entry and remote vehicle start, door locks, liftgate, safety belts, mirror adjustment, steering wheel adjustment, pedal adjustment, interior and exterior lighting controls, climate controls, transmission, four-wheel drive, cruise control, navigation system, blind zone alert, rear vision camera, parking assist, power outlets, and universal remote system. It also briefly discusses the StabiliTrak stability control system and maintaining proper tire pressure.
This document provides a user's guide for the proLIGHT 2000 Machining Center control program software. It includes sections on installation of the hardware and software, overview of the control program interface and commands, tutorial on basic operation, descriptions of NC programming codes, optional machining capabilities, and maintenance of the machining center.
The document is the owner's manual for a 2012 Chevrolet Volt and provides information about the vehicle's instruments, controls, features, and operation. It includes sections on instrument panels, initial drive information, vehicle features, battery and efficiency, performance and maintenance, and more. The manual is intended to help owners understand and properly use all aspects of the Volt.
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
This document is a reference manual for the Mobrey MCU900 Series 4-20mA + HART compatible controller. It provides instructions and specifications for installing, configuring, and operating the MCU900 control unit. The manual covers safety information, an overview of control unit functions and components, step-by-step installation instructions, programming the control unit for different applications, and configuration of outputs, alarms, and communications. Advanced sections provide details for setting up applications involving volumetric measurement, flow measurement, and data logging.
This document is the 6th edition user's manual for the SCORBOT-ER III robot. It contains safety and installation instructions, descriptions of the robot components and controller hardware, and instructions for operating the SCORBASE software to program and run the robot. Appendices provide maintenance and troubleshooting information as well as details on the robot's operating system commands for developing custom software applications.
Bob Hook Chevrolet 2011 Chevy Volt Owners Manualbobhook
A PDF version of the 2011 Chevy Volt Owners Manual uploaded for your convenience by the friendly staff at Bob Hook Chevrolet located at 4144 Bardstown Road in Louisville, KY 40218. Please feel free to call us at 888-219-4506 if we can be of assistance at all. Of course you can always visit us online at www.bobhook.com or like us on Facebook at www.facebook.com/BobHookChevrolet
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
2012 Chevy Colorado Owners Manual Baltimore, MarylandJerry's Chevrolet
This document is the owner's manual for the 2012 Chevrolet Colorado. It provides information on vehicle features and operation, safety features such as airbags and seatbelts, maintenance schedules and procedures, troubleshooting, and more. The manual is intended to help owners understand and properly use their vehicle.
Here are the key steps to remove a SIM card:
1. Turn off the device and remove the battery if installed.
2. Locate the SIM card slot and push the SIM card in slightly to pop it out.
3. Grasp the SIM card by the corner and pull it out of the slot.
Be careful when handling SIM cards to avoid damaging the metallic contacts.
This owner's manual provides instructions for safely operating an LED-LCD television. It contains warnings about electric hazards, safety instructions, and information about the remote control functions, making connections to external devices, and using the basic receiving and playing operations of the TV. The manual should be read carefully and stored for future reference.
Comodo Time Machine is a system backup and restoration utility that allows users to easily restore their system to an earlier point in time. The document provides details on installing and using Comodo Time Machine, including taking snapshots of the system, viewing and managing snapshots, restoring the system from a snapshot, scheduling tasks, and resetting the baseline snapshot. Instructions are also included for using the quick operation console, sub-console, and Windows command line interface.
Service manual-acer-travel mate-5730-extensa-5630-seriesDaniel Blanco
This service guide provides information for technicians servicing TravelMate 5730/Extensa 5630 Series notebooks. It includes specifications, disassembly and replacement procedures, BIOS utilities information, and service updates which are made available on the ACER/CSD website. Technicians are instructed to check the ACER website for the most up-to-date part numbers and any revisions to the guide. The document provides copyright information and guidelines for the safe and proper servicing of Acer notebook computers.
The document provides instructions for safely operating a Geodetic Measurement Station GM-50. Key safety points include:
- Do not take apart or modify the instrument to avoid electric shock, burns or radiation exposure.
- Do not look directly at the sun through the telescope to avoid eye damage.
- Secure the instrument in the carrying case and tighten all clamps securely to prevent dropping during transport.
- Use only the specified batteries, battery charger and power cords to avoid fire or electric shock. Do not short circuit batteries or get them wet.
- When setting up the tripod, tighten all screws securely to avoid collapse or injury. Keep hands away from tripod shoes.
This user manual provides instructions for installing and using the HiPath 3000/5000 optiClient 130 software version 4.0. It includes sections on installation, initial configuration, logging in, the different user interface modes of optiClient phone, office and easyCom, making and receiving calls, using the telephone directory and call lists. The manual contains safety information and warns that unauthorized use of the telecommunications system is illegal. It also notes the user is responsible for establishing security practices to prevent unauthorized use.
Case ih maxxum pro series 115 tractor service repair manualfujsjefksekmfm
This document provides information for repair manuals regarding MXU Value and Limited Series and MAXXUM Value and Pro Series tractors. It includes:
- An overview of the manual sections for various tractor systems and components.
- Notification that some Maxxum models are covered using the corresponding MXU model numbers.
- Details about updated controller identification codes and the new location of the diagnostic connector for Maxxum tractors.
- Safety and precautionary statements to follow when working on the tractors.
The document is an owner's manual for the Garmin GPSMAP 2106/2110 that provides instructions on installing and using the unit. It includes sections on basic operation, main pages, main menu, sonar use, and specifications. The manual describes how to perform common navigation tasks like creating and navigating to waypoints, using routes, and man overboard functions. It also explains how to use the unit's keypad and main pages.
The document provides information about the Site Master S330A and S331A personal SWR/RL and fault location testers, including:
1) They are hand-held instruments that measure SWR, return loss, cable loss, and distance to fault using a built-in synthesized signal source. The S331A has built-in distance-to-fault capability.
2) Standard accessories include a carrying case, power adapters, software, and cable. Optional accessories include calibration standards and adapters.
3) The instruments operate for up to two hours on an internal rechargeable battery or can be powered via 12V DC. Measurements can be downloaded to analysis software.
This document provides a summary of key terms and concepts related to GPS navigation. It includes a glossary defining navigational terms like almanac data, bearing, course made good, crosstrack error, differential GPS, estimated time of arrival, grid, ground speed, latitude, longitude, navigation, position, track, and Universal Transverse Mercator. It also lists the table of contents for the owner's manual of a Garmin GPS 12XL personal navigator.
Simocode dp = manual de parametrização e operaçãoconfidencial
This document is the manual for the 3UF5 SIMOCODE-DP System Motor Protection and Control Device. It describes the components, functions, and parameterization of the SIMOCODE-DP system. The system provides motor protection, control, and monitoring. It consists of basic units, expansion modules, and an operator panel that can communicate via PROFIBUS-DP. The manual provides details on setup, configuration, protection functions, and troubleshooting.
This document provides operation instructions for multi-turn actuators models SA 07.1 - SA 16.1 and SAR 07.1 - SAR 16.1 with AUMA MATIC controls. It describes the scope, technical specifications, safety instructions, transport and storage, mounting, manual operation, electrical connection, setting of limit switches, torque switching, position indicators, and maintenance procedures. The document contains 21 sections covering all aspects of installation, setup and maintenance of the actuators.
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
This document is a reference manual for the Mobrey MCU900 Series 4-20mA + HART compatible controller. It provides instructions and specifications for installing, configuring, and operating the MCU900 control unit. The manual covers safety information, an overview of control unit functions and components, step-by-step installation instructions, programming the control unit for different applications, and configuration of outputs, alarms, and communications. Advanced sections provide details for setting up applications involving volumetric measurement, flow measurement, and data logging.
This document is the 6th edition user's manual for the SCORBOT-ER III robot. It contains safety and installation instructions, descriptions of the robot components and controller hardware, and instructions for operating the SCORBASE software to program and run the robot. Appendices provide maintenance and troubleshooting information as well as details on the robot's operating system commands for developing custom software applications.
Bob Hook Chevrolet 2011 Chevy Volt Owners Manualbobhook
A PDF version of the 2011 Chevy Volt Owners Manual uploaded for your convenience by the friendly staff at Bob Hook Chevrolet located at 4144 Bardstown Road in Louisville, KY 40218. Please feel free to call us at 888-219-4506 if we can be of assistance at all. Of course you can always visit us online at www.bobhook.com or like us on Facebook at www.facebook.com/BobHookChevrolet
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
2012 Chevy Colorado Owners Manual Baltimore, MarylandJerry's Chevrolet
This document is the owner's manual for the 2012 Chevrolet Colorado. It provides information on vehicle features and operation, safety features such as airbags and seatbelts, maintenance schedules and procedures, troubleshooting, and more. The manual is intended to help owners understand and properly use their vehicle.
Here are the key steps to remove a SIM card:
1. Turn off the device and remove the battery if installed.
2. Locate the SIM card slot and push the SIM card in slightly to pop it out.
3. Grasp the SIM card by the corner and pull it out of the slot.
Be careful when handling SIM cards to avoid damaging the metallic contacts.
This owner's manual provides instructions for safely operating an LED-LCD television. It contains warnings about electric hazards, safety instructions, and information about the remote control functions, making connections to external devices, and using the basic receiving and playing operations of the TV. The manual should be read carefully and stored for future reference.
Comodo Time Machine is a system backup and restoration utility that allows users to easily restore their system to an earlier point in time. The document provides details on installing and using Comodo Time Machine, including taking snapshots of the system, viewing and managing snapshots, restoring the system from a snapshot, scheduling tasks, and resetting the baseline snapshot. Instructions are also included for using the quick operation console, sub-console, and Windows command line interface.
Service manual-acer-travel mate-5730-extensa-5630-seriesDaniel Blanco
This service guide provides information for technicians servicing TravelMate 5730/Extensa 5630 Series notebooks. It includes specifications, disassembly and replacement procedures, BIOS utilities information, and service updates which are made available on the ACER/CSD website. Technicians are instructed to check the ACER website for the most up-to-date part numbers and any revisions to the guide. The document provides copyright information and guidelines for the safe and proper servicing of Acer notebook computers.
The document provides instructions for safely operating a Geodetic Measurement Station GM-50. Key safety points include:
- Do not take apart or modify the instrument to avoid electric shock, burns or radiation exposure.
- Do not look directly at the sun through the telescope to avoid eye damage.
- Secure the instrument in the carrying case and tighten all clamps securely to prevent dropping during transport.
- Use only the specified batteries, battery charger and power cords to avoid fire or electric shock. Do not short circuit batteries or get them wet.
- When setting up the tripod, tighten all screws securely to avoid collapse or injury. Keep hands away from tripod shoes.
This user manual provides instructions for installing and using the HiPath 3000/5000 optiClient 130 software version 4.0. It includes sections on installation, initial configuration, logging in, the different user interface modes of optiClient phone, office and easyCom, making and receiving calls, using the telephone directory and call lists. The manual contains safety information and warns that unauthorized use of the telecommunications system is illegal. It also notes the user is responsible for establishing security practices to prevent unauthorized use.
Case ih maxxum pro series 115 tractor service repair manualfujsjefksekmfm
This document provides information for repair manuals regarding MXU Value and Limited Series and MAXXUM Value and Pro Series tractors. It includes:
- An overview of the manual sections for various tractor systems and components.
- Notification that some Maxxum models are covered using the corresponding MXU model numbers.
- Details about updated controller identification codes and the new location of the diagnostic connector for Maxxum tractors.
- Safety and precautionary statements to follow when working on the tractors.
The document is an owner's manual for the Garmin GPSMAP 2106/2110 that provides instructions on installing and using the unit. It includes sections on basic operation, main pages, main menu, sonar use, and specifications. The manual describes how to perform common navigation tasks like creating and navigating to waypoints, using routes, and man overboard functions. It also explains how to use the unit's keypad and main pages.
The document provides information about the Site Master S330A and S331A personal SWR/RL and fault location testers, including:
1) They are hand-held instruments that measure SWR, return loss, cable loss, and distance to fault using a built-in synthesized signal source. The S331A has built-in distance-to-fault capability.
2) Standard accessories include a carrying case, power adapters, software, and cable. Optional accessories include calibration standards and adapters.
3) The instruments operate for up to two hours on an internal rechargeable battery or can be powered via 12V DC. Measurements can be downloaded to analysis software.
This document provides a summary of key terms and concepts related to GPS navigation. It includes a glossary defining navigational terms like almanac data, bearing, course made good, crosstrack error, differential GPS, estimated time of arrival, grid, ground speed, latitude, longitude, navigation, position, track, and Universal Transverse Mercator. It also lists the table of contents for the owner's manual of a Garmin GPS 12XL personal navigator.
Simocode dp = manual de parametrização e operaçãoconfidencial
This document is the manual for the 3UF5 SIMOCODE-DP System Motor Protection and Control Device. It describes the components, functions, and parameterization of the SIMOCODE-DP system. The system provides motor protection, control, and monitoring. It consists of basic units, expansion modules, and an operator panel that can communicate via PROFIBUS-DP. The manual provides details on setup, configuration, protection functions, and troubleshooting.
This document provides operation instructions for multi-turn actuators models SA 07.1 - SA 16.1 and SAR 07.1 - SAR 16.1 with AUMA MATIC controls. It describes the scope, technical specifications, safety instructions, transport and storage, mounting, manual operation, electrical connection, setting of limit switches, torque switching, position indicators, and maintenance procedures. The document contains 21 sections covering all aspects of installation, setup and maintenance of the actuators.
This document is a programming manual for OMRON programmable controllers, including the CQM1, CPM1, CPM1A, and SRM1 models. It provides guidance on setup, basic operation, I/O processes, interrupt functions, memory areas, ladder programming, and the full instruction set for programming the controllers. The manual contains several sections covering different aspects of programming and utilizing the controllers, with each section containing multiple subsections that describe features and functions in more detail. Safety and operating precautions are also outlined at the beginning.
2012 Chevy Express Owner's Manual Baltimore, MarylandJerry's Chevrolet
This document provides an overview of the features and controls of the 2012 Chevrolet Express van. It describes the instrument panel, initial drive information including the remote keyless entry system and door locks, vehicle features like the radio and cruise control, and tips for performance and maintenance such as the StabiliTrak stability control system. The summary highlights the essential systems and components owners need to know to operate the vehicle.
- The document is the user manual for the CL3108 / CL3116 LCD KVM switch, which provides instructions on installation, operation, and specifications of the device.
- It includes information on FCC compliance, a list of package contents, diagrams of the front and rear panels, instructions for hardware setup and basic operation, and descriptions of the on-screen display functions.
- The manual is intended to guide users on safely installing and using the KVM switch to control multiple computers from a single console.
The document provides installation and operation instructions for a Humminbird GPS receiver and GPS receiver/heading sensor. It includes steps for choosing a mounting location, installing the sensor, connecting it to a control head, powering it on, and confirming GPS and heading sensor operation. It also describes the different views available and how to use basic navigation features like marking waypoints, routes, and tracks.
The document is a driver's handbook for the Dacia Duster that provides information on keys, locking and unlocking doors, child safety seats, mirrors, instrumentation, lights, and other controls. It includes instructions on using the remote key fob to lock and unlock doors, how to manually lock doors from the inside and outside, and how to deactivate the front passenger airbag when installing a rear-facing child seat.
This document provides instructions for using a Hitachi color plasma display monitor. It lists the key features of the monitor such as its large 42-inch screen with high-definition resolution of 1024 x 1024 pixels. It also describes how to install and connect the monitor, including to PCs and video devices. The document explains how to operate the monitor using the remote controller and on-screen display. It provides details on setting display options through the monitor's menu screens. Contact information is provided for Hitachi locations in the US, Australia, Singapore, and Hong Kong.
2012 Chevy Malibu Owner's Manual Baltimore, MarylandJerry's Chevrolet
This section of the owner's manual provides an overview of vehicle features and controls for new drivers, including how to use the instrument panel, remote keyless entry, door locks, windows, seat and mirror adjustments, lighting, climate controls, transmission, radio, Bluetooth, and more. It also includes brief descriptions of performance and maintenance features like traction control and tire pressure monitoring.
Gigaset SL400A Digital Cordless Telephone User GuideTelephones Online
The document provides instructions for setting up and using a Gigaset SL400/SL400A cordless phone. It includes steps for checking contents, installing the base and charger, connecting to power, and setting up the handset. The document also provides overviews of the phone's display symbols, menu system, and key functions. Users are instructed to register the phone online for warranty and support.
This user manual provides instructions for installing and using MapSource mapping software. It discusses unlocking maps, connecting a GPS unit to the computer, selecting maps to transfer to the GPS unit, and transferring map data. The manual provides an overview of the main parts of the MapSource interface and directions for common tasks like finding places and creating routes.
This document provides information about XM Radio availability and services for Infiniti models, including:
1) XM Radio, XM NavTraffic, and XM NavWeather are standard or optional equipment depending on the Infiniti model.
2) XM NavTraffic displays real-time traffic information in 80 markets, and XM NavWeather displays current and future weather conditions.
3) Pricing plans and trial period details for XM services are provided. Activating radios is as simple as getting the XM Radio ID and contacting XM.
1. The document provides instructions for programming a HomeLink integrated transceiver to operate devices like garage doors and gates.
2. It involves holding down buttons on the HomeLink and the device's remote transmitter simultaneously until the HomeLink indicator light changes from slow to rapid blinking.
3. For garage doors with "rolling code" protection, the motor button must be pressed and then the programmed HomeLink button within 30 seconds to complete training.
This quick reference card provides guidelines for properly securing child passengers based on their age and size. It outlines that infants and toddlers should ride in rear-facing car seats, with the infant's head supported by the back of the seat. Once toddlers are over a year old and 20 pounds, they can ride forward-facing, with the shoulder straps across their chest. For children ages 4-8, booster seats should be used with the lap belt low on the hips. The card stresses that children under 12 should always ride in the back seat and to consult the vehicle and seat manuals for comprehensive installation and use instructions.
Infiniti Financial Services offers simple, flexible programs to help you acquire a new or qualified pre-owned Infiniti. Whether you're financing or leasing, IFS has attractive rates, easy terms, and the expertise to ensure a variety of financial options with services individually tailored for your convenience – a trademark of the Infiniti Total Ownership Experience.
Learn about the financing process and evaluate your financial situation using our comprehensive guide.
This document provides an introduction and overview of towing with Infiniti vehicles. It discusses selecting the right towing equipment for your needs, preparing your vehicle for towing safely, and following towing tips and capacity limits. The document provides specifications on 2010 Infiniti vehicle towing capacities and recommends discussing requirements with your dealer before towing.
2010 Warranty Information Booklet
Includes Infiniti Warranty statements, information on Infiniti owner satisfaction and assistance, corrosion protection guidelines, Infiniti's Elite Extended Protection Plan, tire safety information, etc.
2010 Infiniti Service & Maintenance Guide to help you make sure your Infiniti receives necessary and timely maintenance. Preventative scheduled maintenance is an important investment to optimize the performance, reliability, safety and resale value of your Infiniti. Scheduling your vehicle's maintenance at the recommended intervals will ensure your vehicle is running at its best.
This document provides an introduction to towing with Infiniti vehicles. It discusses selecting the proper towing equipment, ensuring it is rated for your vehicle's towing capacity, and safely preparing your vehicle for towing. Key topics covered include hitches, trailer types, driving tips, and safety considerations. The document emphasizes the importance of never exceeding your vehicle's towing capacity and ensuring any towing equipment is rated for your specific model.
2009 Infiniti Service and Maintenance Guide
Designed to help you make sure your Infiniti receives necessary and timely maintenance.
Preventative scheduled maintenance is an important investment to optimize the performance, reliability, safety and resale value of your Infiniti. Scheduling your vehicle's maintenance at the recommended intervals will ensure your vehicle is running at its best.
2009 Infiniti Warranty Information Booklet
Includes Infiniti Warranty statements, information on Infiniti owner satisfaction and assistance, corrosion protection guidelines, Infiniti's Elite Extended Protection Plan, tire safety information, etc.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
2. INFINITI NAVIGATION SYSTEM INFINITI CONSUMER AFFAIRS DE- FOREWORD
HELPDESK CONTACT INFORMATION PARTMENT
Thank you for purchasing an INFINITI
For assistance or inquiries about the For assistance or inquiries about the vehicle.
INFINITI Navigation System contact the INFINITI warranty, service or general ques- This user’s manual is for the navigation
INFINITI NAVIGATION SYSTEM HELPDESK at: tions, contact the INFINITI Consumer Affairs system only. This manual contains operat-
. ADDRESS: P.O. Box 1588 Orem, Department at: ing instructions for the INFINITI Navigation
UT 84059-992 For U.S. customers System offered in your INFINITI vehicle.
. E-MAIL: Nissan-Navi-Info@navteq.com 1-800-662-6200 Please read this manual carefully to ensure
. WEB SITE: www.navigation.com For Canadian customers safe operation of the navigation system.
1-800-361-4792 . Because of possible specification
. PHONES: 888-661-9995 Nissan
800-777-0325 Infiniti changes and optional equipment, sec-
tions of this manual may not apply to
. FAX: 801-431-5643 your vehicle.
. HOURS: 6:00 AM to 5:00 PM . All information, specifications and il-
(Pacific Time) lustrations in this manual are those in
effect at the time of printing. INFINITI
reserves the right to change specifica-
tions or design at any time without
notice.
. Do not remove this manual from the
vehicle when selling this vehicle. The
next user of this navigation system may
need the manual.
3. Table of Contents
INFINITI Voice Recognition .............. 2-30
1 Introduction 5 Route guidance
How to use this manual................... 1-2 3 Map settings Procedures after setting a
For safe operation............................ 1-2 destination ...................................... 5-2
Safety information ........................... 1-3 Map types ....................................... 3-2 Route screen ................................... 5-5
Laser product .................................. 1-4 Returning to the current vehicle About route guidance .................... 5-24
location ........................................... 3-4
Moving a map ................................. 3-5
2 Getting started Changing the scale of a map ........... 3-9
6 Storing a location/route
Control buttons and functions.......... 2-2 Other settings for the map Storing a location ............................ 6-2
Start-up screen................................ 2-9 screen ........................................... 3-12 Storing a route ................................ 6-5
Navigation system status screen .... 2-10 Looking at information on the Storing a tracked route .................... 6-6
Functions disabled while driving .... 2-11 map .............................................. 3-19 Storing an avoid area ...................... 6-7
Menu screen and how to operate... 2-12 Editing the address book ................. 6-9
Touch panel operation ................... 2-16 4 Setting a destination Deleting a stored item ................... 6-22
Map menu screen .......................... 2-17
Destination screen ........................... 4-2
Storing your home location/ 7 Viewing technical information
address ......................................... 2-19 Operations after setting a
destination .................................... 4-25 Information screen........................... 7-2
Setting a destination ..................... 2-20
Operating maps............................. 2-24 Viewing available traffic
Setting the voice guidance............. 2-25 information...................................... 7-3
How to input letters and Viewing information about current
numbers........................................ 2-27 vehicle location ............................... 7-9
4. Viewing GPS current location Route guidance............................ 10-10
information...................................... 7-9 Notes on XM NavTraffic®
Viewing navigation system version information.................................. 10-14
information.................................... 7-10 Map data..................................... 10-15
How to handle the display ........... 10-19
8 Other settings
Settings screen................................ 8-2
11 Troubleshooting guide
Display settings............................... 8-2 Customer assistance...................... 11-2
Navigation setting............................ 8-4 Basic operations............................ 11-3
Volume adjustment.......................... 8-9 Vehicle icon................................... 11-4
Clock settings ................................ 8-10 Route calculation and visual
Language and unit settings............ 8-11 guidance ....................................... 11-6
Voice guidance .............................. 11-8
9 Voice recognition Voice recognition ........................... 11-9
Traffic information........................ 11-10
INFINITI Voice Recognition ................ 9-2
Standard mode................................ 9-3
Alternate command mode .............. 9-15
10 General system information
Features of this navigation
system .......................................... 10-2
Current vehicle location ................. 10-4
Route calculation ........................... 10-8
5. 1 Introduction
How to use this manual ................................... 1-2 Safety information ........................................... 1-3
For safe operation ........................................... 1-2 Laser product .................................................. 1-4
Reference symbols....................................... 1-2
6. 1. Introduction
HOW TO USE THIS MANUAL FOR SAFE OPERATION REFERENCE SYMBOLS
This manual uses special words, symbols
INFO:
and icons, organized by function. WARNING!
Please refer to the following items and This indicates information that is necessary for
This is used to indicate the presence of a
familiarize yourself with them. efficient use of your vehicle or accessories.
hazard that could cause death or serious
personal injury. To avoid or reduce the risk,
the procedures must be followed precisely. Reference page:
This indicates the title and page that you
should refer to.
CAUTION!
<>:
This is used to indicate the presence of a This indicates a button on the control
hazard that could cause minor or moderate panel.
personal injury or damage to your vehicle. To
avoid or reduce the risk, the procedures must
be followed carefully. [ ]:
This indicates a key/item displayed on the
screen.
NOTE:
This indicates an item to help you understand Voice Command:
and maximize the performance of your vehicle. This indicates an operation by voice
If ignored, it may lead to a malfunction or poor command.
performance.
1-2
7. 1. Introduction
SAFETY INFORMATION
WARNING! CAUTION!
This system is primarily designed to help
. When the driver wants to operate the . Do not use this system if you notice any
you reach your destination, and it also
navigation system or use the INFINITI malfunctions such as a frozen screen or
performs other functions as outlined in this
controller, first park the vehicle in a safe the lack of sound. Continued use of the
manual. However, you, the driver, must use
location and set the parking brake. system may result in accidents, fire or
the system safely and properly. Informa-
Operating the system while driving can electrical shock.
tion concerning road conditions, traffic
distract the driver and may result in a . Some states/provinces may have laws
signs and the availability of services may
serious accident. limiting the use of video screens while
not always be up-to-date. The system is not
a substitute for safe, proper and legal . Do not rely on route guidance alone. driving. Use this system only where it is
driving. Always be sure that all driving maneu- legal to do so.
vers are legal and safe in order to avoid . Extreme temperature conditions [below
Before using the navigation system, please
accidents. –48F (–208C) and above 1588F (708C)]
read the following safety information. Al-
ways use the system as outlined in this . Do not disassemble or modify this could affect the performance of the
manual. system. If you do, it may result in system.
accidents, fire or electrical shock.
. If you notice any foreign objects in the NOTE:
system hardware, spill liquid on the
system or notice smoke or a smell Do not keep the navigation system running with
coming from it, stop using the system the engine stopped. Doing so may discharge
immediately and contact an INFINITI the vehicle battery. When you use the naviga-
dealer. Ignoring such conditions may tion system, always keep the engine running.
lead to accidents, fire or electrical shock.
1-3
8. 1. Introduction
LASER PRODUCT
This navigation system is certified as a
Class 1 laser product.
The navigation system complies with DHHS
Required XM Radio and XM NavTraffic®
Rules 21 CFR Chapter 1, Subchapter J.
monthly subscriptions are sold separately
after a trial period. XM NavTraffic® is only
WARNING! available in select markets. For more
. Do not disassemble or modify this information,
system. There are no user serviceable see www.xmradio.com/navtraffic.
parts in this navigation system.
. If maintenance, adjustments and opera-
tions other than those specified in this
manual are attempted, injury due to laser
radiation and exposure could occur.
1-4
9. 2 Getting started
Control buttons and functions........................... 2-2 Storing your home location/address................ 2-19
Control panel .............................................. 2-3 How to store your home............................. 2-19
INFINITI controller ........................................ 2-6 Setting a destination...................................... 2-20
Steering switch............................................ 2-7 Searching for a destination......................... 2-20
Start-up screen................................................ 2-9 Starting route guidance.............................. 2-22
Navigation system status screen ..................... 2-10 Deleting a route ........................................ 2-23
Functions disabled while driving ..................... 2-11 Operating maps............................................. 2-24
Menu screen and how to operate .................... 2-12 How to view map screen ............................ 2-24
Menu screens and their purposes ............... 2-12 Setting the voice guidance ............................. 2-25
Using controls to adjust values, levels, Turning voice guidance ON/OFF................... 2-25
etc. .......................................................... 2-13 Adjusting voice guidance volume ................ 2-26
Start menu How to input letters and numbers ................... 2-27
(G37, G37 Coupe, G37 Convertible, M45/ Character (letter and number) input
M35, EX35 and FX50/FX35) ........................ 2-14 screen ...................................................... 2-27
List screen ................................................ 2-15 Phone number input screen........................ 2-28
Touch panel operation.................................... 2-16 INFINITI Voice Recognition............................... 2-30
Example of touch panel operation ............... 2-16 Using the system....................................... 2-30
Map menu screen .......................................... 2-17 Before starting .......................................... 2-30
Current location map screen ....................... 2-17 Giving voice commands.............................. 2-31
Scrolled location map screen ...................... 2-18 Voice command examples .......................... 2-35
11. 2. Getting started
CONTROL PANEL
G37, G37 Coupe, G37 Convertible,
QX56, EX35 and FX50/FX35
&
1 <STATUS>:
Push to display the current status of
the air conditioner, radio, audio, vehi-
cle information (driveable distance and
average fuel economy) and navigation
systems.
&
2 <DEST>:
Push to enter a destination. Various
methods for entering a destination are
available.
“4. Setting a destination”
&
3 <ROUTE>:
Push to access guidance control func-
tions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).
&
4 INFINITI controller:
Push to highlight an item on the
screen, select the highlighted item,
move on the map, etc.
&
5 <INFO>:
Push to display the vehicle information
2-3
12. 2. Getting started
and the navigation information, such INFO:
as GPS and version information, etc.
. If <BACK> needs to be pushed to apply the
&
6 <DAY/NIGHT OFF> : setting in a settings screen, this manual will
Push to switch between the day screen explicitly include a step for this procedure.
(bright) and the night screen (dark). Otherwise, pushing <BACK> returns you to
Push and hold to turn off the display. the previous screen.
Push again to turn on the display. . The layout of the control panel switches may
&
7 <SETTING>: vary depending on the vehicle model and
Push to access the system settings. equipment.
&
8 <VOICE>:
Push to repeat voice guidance for a
guide point.
&
9 <BACK>:
Push to return to the previous screen.
On a settings screen, this button can
also be used to apply the setting.
In a character input screen, this button
can also delete the characters that
have been entered.
&
10 <MAP>:
Push to display the current location
map screen.
&
11 <ZOOM IN>, <ZOOM OUT>:
Push to switch to the zoom mode to
change the map scale.
2-4
13. 2. Getting started
&
5 <SETTING> :
Push to access the system settings.
&
6 <STATUS>:
Push to display the current status of
the air conditioner, radio, audio, vehi-
cle information (driveable distance and
average fuel economy) and navigation
systems.
&
7 <ZOOM IN>, <ZOOM OUT>:
Push to switch to the zoom mode to
change the map scale.
&
8 <DAY/NIGHT OFF> :
Push to switch between the day screen
(bright) and the night screen (dark).
M45/M35 &
3 <MAP> :
Push and hold to turn off the display.
Push again to turn on the display.
&
1 <DEST> : Push to display the current location
map screen. &
9 INFINITI controller:
Push to enter a destination. Various
methods for entering a destination are &
4 <INFO> :
Push to highlight an item on the
screen, select the highlighted item,
available. Push to display the vehicle information
move on the map, etc.
“4. Setting a destination” and the navigation information, such
&
2 <ROUTE> : as GPS and version information, etc.
Push to access guidance control func-
tions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).
2-5
14. 2. Getting started
INFINITI CONTROLLER &
3 Additional directional buttons: M45/M35
G37, G37 Coupe, G37 Convertible, Use to move across the map or high-
QX56, EX35 and FX50/FX35 light an item on the character input
screen.
&
4 Center dial:
Turn to highlight an item on the screen
or adjust a setting.
Turn the center dial on the map screen.
The map scale is displayed. Use the
center dial to adjust the map scale.
&
1 <ENTER>:
Push to select the highlighted item on
the screen.
&
1 <ENTER>: If this button is pushed while a map is
Push to select the highlighted item on displayed, the map menu screen is
the screen. displayed.
If this button is pushed while a map is
displayed, the map menu screen is &
2 Main directional buttons:
displayed. Use to move across the map, highlight
an item on the screen or adjust a
&
2 Main directional buttons: setting (volume, brightness, etc.).
Use to move across the map, highlight
an item on the screen or adjust a &
3 Additional directional buttons:
setting (volume, brightness, etc.). Use to move across the map or high-
light an item on the character input
screen.
2-6
15. 2. Getting started
&
4 Center dial:
STEERING SWITCH &
1 <ENTER>:
Turn to highlight an item on the screen G37, G37 Coupe, G37 Convertible, Tilt to highlight an item on the screen
or adjust a setting. EX35 and FX50/FX35 or adjust a setting. Push to select the
Turn the center dial on the map screen. highlighted item.
The map scale is displayed. Use the If this button is pushed while a map is
center dial to adjust the map scale. displayed, the map menu screen is
&
5 <BACK> :
displayed.
“MAP MENU SCREEN” (page 2-17)
Push to return to the previous screen.
Push and hold to display the start
In a settings screen, this button can
menu.
also be used to apply the setting. On a
“START MENU (G37, G37 Coupe,
character input screen, this button can
G37 Convertible, M45/M35, EX35
also delete the characters that have
and FX50/FX35)” (page 2-14)
been entered.
If this button is tilted up while the
&
6 <VOICE>: G37, G37 Coupe, audio function is activated and the
Push to repeat voice guidance for a G37 Convertible and EX35 map or status screen is displayed, the
guide point. audio system can be operated.
INFO:
&
2 :
Use to adjust the volume. These
If <BACK> needs to be pushed to apply the buttons have the same function as
setting in a settings screen, this manual will that of the volume knob. Refer to the
explicitly include a step for this procedure. vehicle Owner’s Manual.
Otherwise, pushing <BACK> returns you to the
previous screen.
&
3 :
Push this button during a setting
operation to return to the previous
screen. In a settings screen, this
FX50/FX35 button can also be used to apply the
2-7
16. 2. Getting started
setting. QX56 &
3 :
&
4 <TALK> : Push to end a call when in the phone
Push to start the voice recognition mode.
mode. Push and hold for 1 second to Use to switch the audio mode (source).
cancel voice commands when in the Refer to the vehicle Owner’s Manual.
voice recognition mode.
&
4 Tuning switch:
&
5 <SOURCE>: Use to operate the audio system. Refer
Use to switch the audio mode (source). to the vehicle Owner’s Manual.
Refer to the vehicle Owner’s Manual.
&
1 <VOL>:
Use to adjust the volume. This button
has the same function as that of the
volume knob. Refer to the vehicle
Owner’s Manual.
&
2 <TALK> :
Push to start the voice recognition
mode. Push and hold for 1 second to
cancel voice commands when in the
voice recognition mode. Push and hold
to display the phone screen when not
in the voice recognition mode.
2-8
17. 2. Getting started
M45/M35 audio system can be operated. START-UP SCREEN
&
2 :
Push this button during a setting
operation to return to the previous
screen. On a settings screen, this
button can also be used to apply the
setting.
&
3 <TALK> :
Push to start the voice recognition
mode. Push and hold for 1 second to 1. The navigation system starts when the
cancel voice commands when in the ignition switch is pushed to the ACC or
voice recognition mode.
&
1 <ENTER>: Push and hold when not in the voice
ON position.
Tilt to highlight an item on the screen recognition mode to display the phone
or adjust a setting. Push to select the screen.
highlighted item.
If this button is pushed while a map is
&
4 :
Use to adjust the volume. These
displayed, the map menu screen is
buttons have the same function as
displayed.
that of the volume knob. Refer to the
“MAP MENU SCREEN” (page 2-17)
vehicle Owner’s Manual.
Push and hold to display the start
menu. &
5 <SOURCE>: 2. As the start-up screen is displayed,
“START MENU (G37, G37 Coupe, Use to switch the audio mode (source). read the precautions carefully, high-
G37 Convertible, M45/M35, EX35 Refer to the vehicle Owner’s Manual. light [OK] and push <ENTER> or touch
and FX50/FX35)” (page 2-14) [OK].
If this button is tilted up while the
audio function is activated and the
map or status screen is displayed, the
2-9
18. 2. Getting started
INFO: NAVIGATION SYSTEM STATUS SCREEN &
1 Turning direction at the next intersec-
If you do not push <ENTER> for more than 30 By pushing <STATUS> while the current tion
seconds, the status screen will be displayed.
Push <DEST>, <MAP>, <ROUTE>, <INFO>,
location map screen is displayed, you can &
2 Distance to the next intersection
display the current status of the navigation
<SETTING>, <STATUS> or <TALK> to return to the
start-up screen.
system. &
3 Remaining time to the destination
Each time <STATUS> is pushed, displayed
information is switched in the order of &
4 Name of the next street
audio, air conditioner, vehicle information
and navigation route information.
INFO:
There are different status screens displayed
depending on various factors, such as the
currently active mode, whether a destination
has been set or not, etc.
When a route to the destination is not set
and the audio system is off, a screen
similar to the one above appears.
When a route to the destination is set and
the audio system is on, a screen similar to
the one above appears.
2-10
19. 2. Getting started
FUNCTIONS DISABLED WHILE DRIVING To ensure safe driving, some functions
cannot be operated while driving.
The on-screen functions that are not
available while driving will be “grayed-
out” or muted.
In some cases, certain text will not be
displayed on the screen.
Park the vehicle in a safe location and then
operate the navigation system.
2-11
20. 2. Getting started
MENU SCREEN AND HOW TO OPERATE 3. Push <BACK> to return to the previous
screen without applying any changes.
Push <MAP> to return to the current
location map screen without applying
any changes.
INFO:
. Depending on the menu selected, push-
ing <MAP> may not return you to the
current location map screen.
. You can also select an item by tilting the
steering switch up and down (G37, G37
Coupe, G37 Convertible, M45/M35 and
EX35).
MENU SCREENS AND THEIR PUR- How to select a menu item
POSES Example: <DEST> screen
Push <DEST>, <ROUTE>, <PHONE>, <INFO> or 1. Turn the center dial clockwise or
<SETTING> to display the corresponding counterclockwise or push the up or
menu screen. down button of the main directional
buttons. An item is highlighted accord-
ingly.
2. To select the preferred menu item,
highlight the item and push <ENTER>.
The next screen is displayed.
2-12
21. 2. Getting started
INFO:
. You can also adjust the volume of phone
and voice guidance, the display brightness,
etc. by tilting the steering switch up and
down.
. This same adjustment can also be made by
the touch panel operation.
“Adjusting the volume and others”
(page 2-16)
USING CONTROLS TO ADJUST VA- How to adjust
LUES, LEVELS, ETC. 1. Highlight the preferred setting item and
There are four main methods you can use push <ENTER>. The color of the corre-
to control the navigation system: the sponding adjustment item changes.
center dial, the main directional buttons, 2. Use one of the controls, and the value
the touch panel and the steering switch. or bar indicating levels increases or
Use these controls to adjust the volume of decreases accordingly.
phone and voice guidance, the display
brightness, etc. 3. Push <ENTER> or <BACK> to apply the
setting.
2-13
22. 2. Getting started
START MENU (G37, G37 Coupe, G37 INFO:
Convertible, M45/M35, EX35 and <ENTER> on the steering switch can be used to
FX50/FX35) display the start menu only when the map or
The start menu can be displayed using the status screen is displayed.
steering switch.
Available items
. Destination:
Displays the destination screen. It is
the same screen that appears when you
push <DEST>.
“4. Setting a destination”
. Route:
Displays the route screen. It is the
same screen that appears when you
1. Push and hold <ENTER> on the steering push <ROUTE>.
switch. “5. Route guidance”
2. Highlight the preferred item and push . Information:
<ENTER>. Displays the information screen. It is
the same screen that appears when you
push <INFO>.
“7. Viewing technical information”
. Settings:
Displays the settings screen. It is the
same screen that appears when you
push <SETTING>.
“8. Other settings”
2-14
23. 2. Getting started
the entry number of the selected item.
Turn the center dial or push the up or
down buttons of the main directional
buttons to scroll the list.
&
5 Highlight and push <ENTER> to sort the
list by shortest distance.
&
6 Highlight and push <ENTER> to sort the
list in the original order.
&
7 When the list is sorted by the shortest
distance, you can confirm the selected
location in the preview on the right
side of the screen.
LIST SCREEN highlight the item and push the right
button of the main directional buttons
After searching for a point of interest, a list to show the hidden part of the name.
screen is displayed. You can also display the hidden part of
Depending on the list displayed, it can be the name by touching .
sorted.
&
2 Distance from the current location
Items displayed in a list
&
3 Direction to the point of interest
&
1 Highlight the preferred item from the
list and push <ENTER> to select it. &
4 If the entire list cannot be displayed on
If a location or facility name is not the screen, the system displays the
completely displayed (due to length), total number of items in the list and
2-15
24. 2. Getting started
TOUCH PANEL OPERATION When the item is touched, the following Inputting letters and numbers
screen is displayed.
With this system, the same operations as
those for the INFINITI controller are possi- Adjusting the volume and others
ble using the touch panel operation.
This manual describes the operations
using the INFINITI controller.
For the operations that differ from those of
the INFINITI controller and for useful
methods for using the touch panel opera-
tion, refer to each section. 1. Touch the letter or number.
EXAMPLE OF TOUCH PANEL OPERA- 2. When you desire to delete a character,
Touch [+] or [–] located on the right and left touch [Delete]. Push and hold [Delete]
TION of the bar graph to perform the adjust- to delete all of the characters.
Here, the operation examples performed ment.
with the touch panel operation are de- Scrolling the message or list
scribed.
Selecting the item
Touching [UP] or [DOWN] allows you to
scroll the message or list.
2-16
25. 2. Getting started
MAP MENU SCREEN CURRENT LOCATION MAP SCREEN . Map Settings:
Performs the map operations such as
Push <ENTER> while the current location the switching of map type and the
map screen or a scrolled map screen is setting of map orientation and scale.
displayed to display the menu correspond- “OTHER SETTINGS FOR THE MAP
ing to that screen. SCREEN” (page 3-12)
This menu allows you to quickly use . Landmark Icons:
helpful functions, such as setting a desti- Allows you to display certain points of
nation easily and searching for Points of interest near the current vehicle loca-
Interest nearby. tion on the map, such as restaurants
To select a menu item, use the method If <ENTER> is pushed while the current and gas stations, etc.
described in “Menu screen types and how location map screen is displayed, the “DISPLAYING LANDMARK ICONS”
to operate”. following options are available. (page 3-19)
. Store Location: . Store Tracking:
INFO: Allows you to store the current vehicle Allows you to store in the Address Book
location in the Address Book. The the route that you have travelled from
With the touch operation, the same screen can stored location can be retrieved as the starting point to the current loca-
be displayed by touching [Map Menu] located necessary to set it as a destination tion.
on the map screen. (waypoint). “STORING A TRACKED ROUTE”
“STORING A LOCATION” (page 6-2) (page 6-6)
. Nearby: . Guide Screen:
Allows you to search for points of Set the default display screen for route
interest near the current vehicle loca- guidance.
tion, such as restaurants and gas “Visual guidance settings”
stations, etc. (page 5-20)
“SETTING A NEARBY PLACE”
(page 4-15)
2-17
26. 2. Getting started
SCROLLED LOCATION MAP SCREEN . Nearby: you desire to check.
Allows you to search for points of Please note that incident details are a
interest near the map location where feature of Traffic Information, and that
you pushed <ENTER> and set it as a an XM NavTraffic® subscription is re-
destination or waypoint. quired in order to receive Traffic In-
Use the same search method as the formation.
one for POI.
“SETTING A NEARBY PLACE”
(page 4-15)
. Store Location:
If <ENTER> is pushed while a scrolled map
Allows you to store the map location
screen is displayed, the following options
where you pushed <ENTER> in the
are available.
Address Book. The stored location can
. New Dest.: be retrieved to set it as a destination or
Allows you to set the destination to the waypoint.
map location where you pushed “STORING A LOCATION” (page 6-2)
<ENTER>. If a destination is already
. Delete:
set, the location will be set as the
Allows you to delete a stored location,
new destination.
destination or waypoint. To delete it,
“SETTING FROM MAP” (page 4-24)
place the cross pointer over the corre-
. Add to Route: sponding icon.
Allows you to set the map location
. Incident Details:
where you pushed <ENTER> as the
Can be selected only when the traffic
destination or a waypoint.
information icon is displayed.
This is available only when the sug- Displays the details of the traffic
gested route is already set. information icon that is being dis-
“Setting a destination or way- played.
point” (page 5-8) Place the cross pointer over the icon
2-18
27. 2. Getting started
STORING YOUR HOME LOCATION/AD-
DRESS
HOW TO STORE YOUR HOME
If your home location is already stored in
the Address Book, it can be easily retrieved
to set the route to your home.
The procedure to store your home location
is the same as for storing any other 2. Highlight [Home Location (Add New)] 4. Highlight [Street Address] and push
location. and push <ENTER>. <ENTER>. A character input screen is
“4. Setting a destination” displayed.
As an example, the procedure for storing
your home location by searching for a
destination by address is described here.
3. A confirmation message is displayed.
Confirm the contents of the message, 5. Enter the address of your home, high-
highlight [Yes] and push <ENTER>. light [OK] and push <ENTER>.
The map screen is displayed.
“SETTING A STREET ADDRESS”
(page 4-4)
1. Push <DEST>.
2-19
28. 2. Getting started
INFO: SETTING A DESTINATION
You can also perform the same setting by
pushing <SETTING> and selecting [Navigation].
SEARCHING FOR A DESTINATION
“STORING A LOCATION BY SEARCHING” As an example, the method for setting an
(page 6-2) airport as the destination using [Points of
Interest] is described here.
6. Pushing the directional buttons, adjust
your home location if necessary.
7. After adjusting the location, push
<ENTER>.
1. Push <DEST>.
8. A message is displayed and your home
location is stored.
9. Push <MAP> to return to the current
location map screen.
The home icon is displayed on the map.
2. Highlight [Points of Interest] and push
2-20
29. 2. Getting started
<ENTER>. INFO:
You can enter the city name and facility
name to narrow down your search.
The number of narrowed down points are
displayed in the “Matches” column.
5. Highlight [By Name] and push <ENTER>.
3. Highlight [Travel] and push <ENTER>. A character input screen is displayed.
7. Highlight the preferred airport from the
list and push <ENTER>.
INFO:
4. From the category list, highlight [AIR- 6. Highlight [List] and push <ENTER>. . By selecting [By Dist.], you can sort the
PORT] and push <ENTER>. list by the shortest distance.
A list screen is displayed.
. The position of the selected location is
displayed in the preview on the right
side of the screen.
2-21
30. 2. Getting started
STARTING ROUTE GUIDANCE
After setting the destination and perform-
ing route calculation, the suggested route
is displayed.
8. The selected destination is displayed at 3. When approaching a guide point, the
the center of the map. Highlight [Start] system automatically changes to the
after confirming the location of the split screen and shows an enlarged
displayed destination, and push view of the intersection in the left
<ENTER>. screen.
1. Highlight [Start] and push <ENTER>. Push <MAP> to switch to the full map
INFO: screen.
. The system sets the destination to the
selected location and starts calculating a
route.
. Even after setting a destination, you can
adjust the location of the destination,
store the route, etc. if necessary.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-25) 2. Once route guidance is started, the
system navigates you through the 4. When arriving at the destination, route
guide points using visual and voice guidance automatically ends.
guidance.
2-22
31. 2. Getting started
DELETING A ROUTE
To delete a route already set, use the
following procedure. If you delete a route,
the destination is also deleted.
3. A confirmation message is displayed.
Highlight [Yes] and push <ENTER>.
INFO:
If a route is cancelled, [Cancel Route] changes to
[Resume Route].
Highlight [Resume Route] and push <ENTER> to
1. Push <ROUTE>. reactivate the cancelled route.
This is available only until a new route is set.
2. Highlight [Cancel Route] and push
<ENTER>.
2-23
32. 2. Getting started
OPERATING MAPS &
4 Waypoint:
Displays the locations that you travel
past when going to the destination. A
maximum of 5 waypoints can be set.
&
5 Destination:
Indicates the destination location of
the route guidance.
When the map scale is 300 ft (100 m)
or less in Plan View, or 1/4 mile (500
m) or less in BirdviewTM: The name is
displayed on the map screen.
&
6 Suggested route:
Appears in bold yellow during route
guidance.
&
7 Map Menu icon:
Touch the icon to display the Map
HOW TO VIEW MAP SCREEN &
2 Starting point: Menu screen.
Displays the vehicle location, with “MAP MENU SCREEN” (page 2-17)
The navigation system displays various
information on the map screen. which the route is set, as the starting &
8 / Direction indicator:
point. Indicates the direction of the map.
Screen information
&
3 Guide point: Touch the icon to switch the direction
&
1 Vehicle icon: Indicates a guide point on the route. of the map.
Indicates the current vehicle location “SETTINGS OF HEADING/LONG
and the direction that you are travel- RANGE MAP VIEW” (page 3-14)
ing.
2-24
33. 2. Getting started
&
9 Scale indicator:
SETTING THE VOICE GUIDANCE
Indicates the scale of the map.
Touch the icon to display the scale bar.
TURNING VOICE GUIDANCE ON/OFF
This allows the map scale to be You can activate or deactivate voice gui-
adjusted. dance and adjust the volume.
“OPERATING WITH THE TOUCH
OPERATION” (page 3-10)
&
10 Street name:
Displays the name of the street that 3. Highlight [Guidance Voice] and push
you are currently driving on. <ENTER>. The indicator illuminates if
voice guidance is activated.
Other settings
You can also activate or deactivate voice
guidance using the following procedure.
1. Push <ROUTE>.
1) Push <SETTING>.
2) Highlight [Volume and Beeps] and push
<ENTER>.
2. Highlight [Guidance Settings] and push
<ENTER>. 3) Highlight [Guidance Voice] and push
2-25
34. 2. Getting started
<ENTER>.
ADJUSTING VOICE GUIDANCE VO-
LUME
You can adjust the volume of voice
guidance.
3. Highlight [Guidance Vol.] and push
<ENTER>.
G37, G37 Coupe,
G37 Convertible and EX35
1. Push <SETTING>.
4. Adjust the voice guidance volume by
using the center dial or main direc-
tional buttons.
FX50/FX35
2. Highlight [Volume and Beeps] and push
<ENTER>.
2-26
35. 2. Getting started
INFO: HOW TO INPUT LETTERS AND NUMBERS
You can also adjust the volume by turning the
audio system volume knob or pushing on
CHARACTER (letter and number)
the steering switch while voice guidance is INPUT SCREEN
being announced (G37, G37 Coupe, G37 Con- You will have to enter alphanumeric
vertible, M45/M35, EX35 and FX50/FX35) or characters when setting a destination,
tilting <VOL> on the steering switch (QX56 only). searching for a facility or editing the stored
locations, etc.
QX56
1. Use the touch panel, center dial, main
directional buttons or additional direc-
tional buttons to highlight a character
on the displayed keyboard.
M45/M35
2-27
36. 2. Getting started
. Symbol keys are displayed by highlight-
ing [Symbols] and pushing <ENTER>.
Alphabet keys are displayed by high-
lighting [A-Z] and pushing <ENTER>.
2. Push <ENTER>. The highlighted charac- 4. After finishing the entry, highlight [List]
ter is entered. and push <ENTER>.
INFO:
Symbol input screen
. You can push <BACK> on the control
panel to return to the previous screen, PHONE NUMBER INPUT SCREEN
but only after deleting all the characters You can enter a phone number as a search
entered. method to look for a point of interest.
. When you touch [BACK] on the screen,
the screen returns to the previous screen INFO:
3. Push <BACK>, or highlight [Delete] and even when characters have been en-
push <ENTER> to delete the last char- tered. Only the locations included in the database in
acter entered. . When the character that you have the map data can be searched by the phone
entered can only be followed by one number.
Push and hold <BACK> to delete all the
other character, that character is entered
characters entered.
automatically.
Highlight [Space] and push <ENTER> to . When you have entered text and nar-
enter a space. rowed down the matching list items to a
number that will fit on the screen, the
list screen appears automatically.
2-28
37. 2. Getting started
INFO:
. You can push <BACK> on the control panel to
return to the previous screen, but only after
deleting all the numbers entered.
. When you touch [BACK] on the screen, the
screen returns to the previous screen even
when numbers have been entered.
1. Use the touch panel, center dial, main 3. Push <BACK>, or highlight [Delete] and
directional buttons or additional direc- push <ENTER> to delete the last number
tional buttons to highlight a number on entered.
the displayed keyboard. Push and hold <BACK> to delete all the
numbers entered.
2. Push <ENTER>. The highlighted number
is entered. 4. After finishing the entry, highlight
[Map] and push <ENTER>.
2-29
38. 2. Getting started
INFINITI VOICE RECOGNITION . When using the system in French, com- BEFORE STARTING
mands and features differ from those
INFINITI Voice Recognition allows hands- To get the best recognition performance of
available when using the system in English.
INFINITI Voice Recognition, observe the
free operation of the navigation system If you select the “Français” key, the French
and other systems equipped on this following:
language will be displayed, so please use
vehicle, in one of two modes, Standard the French Owner’s Manual. To obtain a . The interior of the vehicle should be as
Mode or Alternate Command Mode. In French Owner’s Manual, please refer to the quiet as possible. Close the windows to
Standard Mode, you can operate Phone vehicle Owner’s Manual. eliminate the surrounding noises (traf-
and Information. fic noise and vibration sounds, etc.),
. The voice recognition system cannot be
The commands that are available are which may prevent the system from
operated when the retractable hard top is
always shown on the display and an- correctly recognizing the voice com-
open (G37 Convertible only).
nounced by the system. You can complete mands.
your desired operation by simply following USING THE SYSTEM . Wait until the tone sounds before
the prompts given by the system. In this speaking a command.
mode, hands–free operation of Audio, Initialization . Speak in a natural conversational voice
Climate Control and Display is not avail- When the ignition switch is pushed to the without pausing between words.
able through Voice Recognition. ON position, INFINITI Voice Recognition is
. If the air conditioner is set to “Auto”,
initialized, which takes a few seconds.
the fan speed is automatically lowered
INFO: When completed, the system is ready to
so that your commands can be recog-
accept voice commands. If <TALK> is
. For the voice commands for the audio, air pushed before the initialization completes,
nized more easily.
conditioner and other systems, refer to the the display will show the message: “Pho-
Owner’s Manual of your vehicle. The follow- netic data downloading. Please wait.”
ing sections refer only to the navigation,
phone, and information systems.
2-30
39. 2. Getting started
GIVING VOICE COMMANDS
2. A list of commands appears on the
screen, and the system provides the
QX56 voice menu prompt “Would you like to
G37, G37 Coupe,
access Phone, Navigation, Information
G37 Convertible and EX35 or Help?”.
3. After the tone sounds and the icon on
the screen changes from [ ] to [ ],
speak a command.
4. Continue to follow the voice menu
prompts and speak after the tone
sounds until your desired operation is
completed.
M45/M35
1. Push <TALK> located on the steering
FX50/FX35 switch.
2-31
40. 2. Getting started
Operating tips
. Say a command after the tone.
. Commands that are available are al-
ways shown on the display and spoken
through voice menu prompts. Com-
mands other than those that are dis-
played are not accepted. Please follow
the prompts given by the system.
. If the command is not recognized, the
system announces, “Please say again”.
Repeat the command in a clear voice.
. Push <BACK> once to return to the
previous screen.
. If you want to cancel the command,
push and hold <TALK>. The message,
“Voice cancelled” will be announced.
. Push <TALK> to pause the operation.
Push <TALK> again to restart the
operation.
. If you want to adjust the volume of the
system feedback, push the volume
control buttons [+] or [–] on the
steering switch or use the audio system
volume knob while the system is
making an announcement.
2-32
41. 2. Getting started
Command List
Category Command:
Command Action
Navigation Operates Navigation function.
Phone Operates Phone function.
Information Displays vehicle Information function.
Help Displays User Guide.
Navigation Command:
Command Action
Address Searches for a location by the street address specified, and sets a route (for continental U.S. only).
Places Sets a route to a facility near the current vehicle location.
Home Sets a route to your home that is stored in the Address book.
Previous Destinations Sets a route to a previous destination.
Phone Command:
Command Action
Dial Number Makes a call to a spoken phone number up to 10 digits.
Redial Makes a call to the latest dialed number.
Phonebook Makes a call to a contact that is stored in the Phonebook.
International Call Makes an international call by allowing more than 10 digits to be spoken.
Change Number Corrects the phone number when it is not recognized (available during phone number entry).
2-33
42. 2. Getting started
Information Command:
Command Action
Fuel Economy Displays fuel economy information.
Trip Computer Displays trip information.
Maintenance Displays maintenance information.
Traffic Info. Turns the traffic information system ON and OFF.
2-34
43. 2. Getting started
VOICE COMMAND EXAMPLES
To use the voice recognition function,
speaking one command is sometimes
sufficient, but at other times it is necessary
to speak two or more commands. As
examples, some additional basic opera-
tions that are performed by voice com-
mands are described here.
Example 1: Setting a destination by
a street address FX50/FX35 M45/M35
1. Push <TALK> located on the steering
switch.
G37, G37 Coupe,
QX56
G37 Convertible and EX35 2. The system announces, “Would you like
to access Phone, Navigation, Informa-
tion or Help?”.
3. Speak “Navigation”.
2-35
44. 2. Getting started
6. Speak the name of the city, “Gardena”.
4. Speak “Address”. 8. Voice feedback will be provided when
7. Speak the name of the street, “South the command is accepted, and the list
Figueroa street”. of street names appears.
9. After the tone sounds and the icon on
INFO: the screen changes again, speak
“One”.
Only the official street names stored in the
map database can be recognized by the
system. To improve accuracy, speak the
street name precisely and include Boule-
5. Speak the name of the state, “Califor- vard, Way, North, South, etc., if known. If
nia”. you are unsure of the full name, speaking
only the name such as “Figueroa” is
acceptable, but recognition accuracy may
be reduced.
10. Speak the house number.
“How to speak numbers”
(page 9-23)
2-36
45. 2. Getting started
INFO: Example 2: Placing a call to the
If you do not know the house number, speak phone number 800-662-6200
“No house number”.
QX56
11. To confirm the destination location on
G37, G37 Coupe,
the map, speak “Show map”. To G37 Convertible and EX35
calculate a route, speak “Calculate
route”.
M45/M35
1. Push <TALK> located on the steering
switch.
FX50/FX35
2-37
46. 2. Getting started
2. The system announces, “Would you like 5. Speak “800”. 7. The system announces, “Please say
to access Phone, Navigation, Informa- last four digits or say change number”.
tion or Help?”. Speak “6200”.
3. Speak “Phone”.
6. The system announces, “Please say
next three digits or dial, or say change
number”. Speak “662”. 8. The system announces, “Dial or Change
Number?”. Speak “Dial”.
4. Speak “Dial Number”.
2-38
47. 2. Getting started
area code first and then follow the prompts.
. Do not add a “1” in front of the area code
when speaking phone numbers.
. If the system does not recognize your
command, please try repeating the com-
mand using a natural voice. Speaking too
slow or too loudly may further decrease
recognition performance.
9. The system makes a call to 800-662-
6200. Example 3: Placing an international
call to the phone number 011-81- FX50/FX35
INFO: 111-222-3333
. You can also speak “800-662-6200” (10
continuous digits) or “662-6200” (7 contin-
uous digits), if the area code is not
necessary. However the 3-3-4 digit grouping
is recommended for improved recognition.
“How to speak numbers” (page 9-23)
. The INFINITI voice recognition system is not
limited to recognizing phone numbers of
only 7 or 10 digits. To dial a number in a
format other than the (3) 3-4 grouping, use QX56
the “International Call” command. G37, G37 Coupe,
G37 Convertible and EX35
. If you say “Change Number” during phone
number entry, the system will automatically
request that you repeat the number using
the 3-3-4 format. In this case please say the
2-39
48. 2. Getting started
6. Speak “Dial”.
4. Speak “International Call”.
7. The system makes a call to 011-81-
M45/M35 111-222-3333.
1. Push <TALK> located on the steering
switch. INFO:
Any digit input format is available in the
International Number input process.
5. Speak “01181111222333”.
2. The system announces, “Would you like
to access Phone, Navigation, Informa-
tion or Help?”.
3. Speak “Phone”.
2-40
49. 3 Map settings
Map types....................................................... 3-2 Operating with the touch operation ............. 3-10
Plan view .................................................... 3-2 Map scale ................................................. 3-11
BirdviewTM .................................................. 3-3 Other settings for the map screen ................... 3-12
Building graphics ........................................ 3-3 Switching the map view ............................. 3-12
Returning to the current vehicle location............ 3-4 Settings of heading/long range map view .... 3-14
Operating with the touch operation ............... 3-5 Changing the BirdviewTM angle ................... 3-16
Moving a map ................................................. 3-5 Operation with split screen display ............. 3-18
Plan view .................................................... 3-5 Looking at information on the map ................. 3-19
BirdviewTM .................................................. 3-7 Displaying landmark icons.......................... 3-19
Changing the scale of a map ............................ 3-9 Map scrolling information........................... 3-20
Operating with the buttons on the control Map symbols ............................................ 3-22
panel.......................................................... 3-9
Operating with the center dial .................... 3-10