This document discusses a study using quantum chemical calculations and molecular dynamics simulations to predict the corrosion inhibition performance of some thiazole and thiadiazole derivatives against iron corrosion. The study calculates quantum chemical parameters such as HOMO-LUMO energies, chemical hardness, and binding energies of the inhibitor molecules on an iron surface. The results from these calculations are in good agreement with experimental inhibition efficiency data and can help identify the most effective inhibitor.
Quantum chemical calculations were performed on Coumarin and its derivatives to determine corrosion inhibition properties using Parameterized Model7 (PM7). EHOMO (highest occupied molecular orbital energy), ELUMO (lowest unoccupied molecular orbital energy), energy gap (ΔE), dipole moment (μ) and other parameters including global hardness (η), global softness (S), absolute electro negativity (χ), and electrophilicity index (ω) from inhibitor molecule to the metallic atom were determined. Results illustrate that adsorption of inhibitor onto metal surface would preferentially be through heteroatoms of molecules. Theoretical calculations on compounds show that Scopoletin and Coumarin possess efficient corrosion inhibition property on metals.
Correlation between corrosion inhibitive effect and quantum molecular structu...Al Baha University
Correlation between corrosion inhibitive effect and quantum molecular structure of Schiff bases for iron in acidic and alkaline media
Quantum chemical calculations using the density functional theory (DFT) have been applied to the five kinds of polydentate Schiff base compounds (PSCs), act as inhibitors for iron in aerated 2.0 M HNO3 and 2.0 M NaOH media. The structural parameters, such as the frontier molecular orbital energy HOMO (highest occupied molecular orbital), LUMO (lowest unoccupied molecular orbital), energy gap ΔE (ELUMO - EHOMO), the charge distribution, the absolute electronegativity (χ), the fraction of electrons transfer (ΔN) from inhibitors to iron, the dipole moment (μ), the global hardness (η) and the total energy (Etotal) were also calculated and correlated with their inhibition efficiencies (%IE). The inhibition effects of (PSCs) may be explained in terms of electronic properties. The results showed that the (%IE) of PSCs increased with the increase in EHOMO and decrease in ELUMO - EHOMO. The inhibitor molecules were first adsorbed on the iron surface and blocking the reaction sites available for corrosive attack; and the areas containing N and O atoms are most possible sites for bonding by donating electrons to the iron surface through interaction with π-electrons of the aromatic rings, and the azo methine group. Also, the adsorbed Schiff base molecules interact with iron ions in the corrosive media leading to neutral and cationic iron-Schiff base complexes. Adsorption process is spontaneous, exothermic and obeyed Temkin isotherm and regarded as physical as chemical mechanism. The polarization studied indicated that the inhibitors act as a mixed type inhibitor in HNO3; cause only inhibition of the cathode process in NaOH, and the magnitude of the displacement of the Tafel plot is proportional to its concentration. Models for the inhibition corrosion behaviour were developed based upon statistical analyses of the experimental data. Some thermodynamic and kinetic parameters (Kads, ΔGads) were estimated. Both experimental and quantum theoretical calculations are in excellent agreement. The inhibition efficiency increase in the order of: PSC_1 > PSC_2 > PSC_3 > PSC_4>PSC_5. Thus, DFT study gave further insight into the mechanism of inhibition action of PSCs. This research might provide a theoretical inhibition performance evaluation approach for homologous inhibitors.
Influence of the alkyl chain length of alkyltriazoles on the corrosion inhibi...Al Baha University
Abstract. Steel is an important material and has been widely used in today's industrial production. Using organic
corrosion inhibitors is an effective means to prevent steel from corrosion. Generally, the molecular structures of
inhibitors can have a major impact on their corrosion inhibition efficiency. In this work, the influence of alkyl chain
length of three alkyltriazoles on the corrosion inhibition of iron has been investigated by density functional based tight
binding (DFTB) approach. Several typical descriptors such as frontier molecular orbital, adsorption energy, density of
states have been discussed in detail. Our findings will contribute to the understanding of the inhibition mechanism and
the designing of novel corrosion inhibitors.
This paper deals with the effect of natural pigments
(chlorophyll and anthocyanin) on the secondary bonds in ( poly
methyl methacrylate PMMA), which play an important role in the
physical and chemical behavior of it. Natural pigments extracted
from plants by a simple method and blended with PMMA powder
in different ratio of natural pigments, and the properties of the
blend were determined and compared. The extracted pigments
were characterized by UV- visible spectroscopy and Fourier
transform infrared spectroscopy (FTIR). The blend of PMMA
with pigments were characterized by FTIR, X-ray diffraction
(XRD), differential scanning calorimetry (DSC), hardness, and
density. The results show that anthocyanin shows higher
depression in glass transition temperature (Tg) of PMMA than
chlorophyll pigment, where the maximum effect of chlorophyll is
3%. The obtained Tg used in calculations depending on molecular
models which its content the simplest idealized model of a linear
molecule is the chain model without branching. The hardness and
density of PMMA decrease as anthocyanin and chlorophyll
percent increases. All these results were contributed to that
chlorophyll and anthocyanin act as plasticizers by effecting on
secondary bonds of polymers.
New Materials Based on Acridine: Correlation Structure – Properties and Optoelectronic Applications
Original Research Article
Journal of Chemistry and Materials Research Vol. 1 (4), 2014, 112–122
Hayat Sadki, Samir Chtita, Mohammed Naciri Bennani, Tahar Lakhlifi, Mohammed Bouachrine*
Quantum chemical calculations were performed on Coumarin and its derivatives to determine corrosion inhibition properties using Parameterized Model7 (PM7). EHOMO (highest occupied molecular orbital energy), ELUMO (lowest unoccupied molecular orbital energy), energy gap (ΔE), dipole moment (μ) and other parameters including global hardness (η), global softness (S), absolute electro negativity (χ), and electrophilicity index (ω) from inhibitor molecule to the metallic atom were determined. Results illustrate that adsorption of inhibitor onto metal surface would preferentially be through heteroatoms of molecules. Theoretical calculations on compounds show that Scopoletin and Coumarin possess efficient corrosion inhibition property on metals.
Correlation between corrosion inhibitive effect and quantum molecular structu...Al Baha University
Correlation between corrosion inhibitive effect and quantum molecular structure of Schiff bases for iron in acidic and alkaline media
Quantum chemical calculations using the density functional theory (DFT) have been applied to the five kinds of polydentate Schiff base compounds (PSCs), act as inhibitors for iron in aerated 2.0 M HNO3 and 2.0 M NaOH media. The structural parameters, such as the frontier molecular orbital energy HOMO (highest occupied molecular orbital), LUMO (lowest unoccupied molecular orbital), energy gap ΔE (ELUMO - EHOMO), the charge distribution, the absolute electronegativity (χ), the fraction of electrons transfer (ΔN) from inhibitors to iron, the dipole moment (μ), the global hardness (η) and the total energy (Etotal) were also calculated and correlated with their inhibition efficiencies (%IE). The inhibition effects of (PSCs) may be explained in terms of electronic properties. The results showed that the (%IE) of PSCs increased with the increase in EHOMO and decrease in ELUMO - EHOMO. The inhibitor molecules were first adsorbed on the iron surface and blocking the reaction sites available for corrosive attack; and the areas containing N and O atoms are most possible sites for bonding by donating electrons to the iron surface through interaction with π-electrons of the aromatic rings, and the azo methine group. Also, the adsorbed Schiff base molecules interact with iron ions in the corrosive media leading to neutral and cationic iron-Schiff base complexes. Adsorption process is spontaneous, exothermic and obeyed Temkin isotherm and regarded as physical as chemical mechanism. The polarization studied indicated that the inhibitors act as a mixed type inhibitor in HNO3; cause only inhibition of the cathode process in NaOH, and the magnitude of the displacement of the Tafel plot is proportional to its concentration. Models for the inhibition corrosion behaviour were developed based upon statistical analyses of the experimental data. Some thermodynamic and kinetic parameters (Kads, ΔGads) were estimated. Both experimental and quantum theoretical calculations are in excellent agreement. The inhibition efficiency increase in the order of: PSC_1 > PSC_2 > PSC_3 > PSC_4>PSC_5. Thus, DFT study gave further insight into the mechanism of inhibition action of PSCs. This research might provide a theoretical inhibition performance evaluation approach for homologous inhibitors.
Influence of the alkyl chain length of alkyltriazoles on the corrosion inhibi...Al Baha University
Abstract. Steel is an important material and has been widely used in today's industrial production. Using organic
corrosion inhibitors is an effective means to prevent steel from corrosion. Generally, the molecular structures of
inhibitors can have a major impact on their corrosion inhibition efficiency. In this work, the influence of alkyl chain
length of three alkyltriazoles on the corrosion inhibition of iron has been investigated by density functional based tight
binding (DFTB) approach. Several typical descriptors such as frontier molecular orbital, adsorption energy, density of
states have been discussed in detail. Our findings will contribute to the understanding of the inhibition mechanism and
the designing of novel corrosion inhibitors.
This paper deals with the effect of natural pigments
(chlorophyll and anthocyanin) on the secondary bonds in ( poly
methyl methacrylate PMMA), which play an important role in the
physical and chemical behavior of it. Natural pigments extracted
from plants by a simple method and blended with PMMA powder
in different ratio of natural pigments, and the properties of the
blend were determined and compared. The extracted pigments
were characterized by UV- visible spectroscopy and Fourier
transform infrared spectroscopy (FTIR). The blend of PMMA
with pigments were characterized by FTIR, X-ray diffraction
(XRD), differential scanning calorimetry (DSC), hardness, and
density. The results show that anthocyanin shows higher
depression in glass transition temperature (Tg) of PMMA than
chlorophyll pigment, where the maximum effect of chlorophyll is
3%. The obtained Tg used in calculations depending on molecular
models which its content the simplest idealized model of a linear
molecule is the chain model without branching. The hardness and
density of PMMA decrease as anthocyanin and chlorophyll
percent increases. All these results were contributed to that
chlorophyll and anthocyanin act as plasticizers by effecting on
secondary bonds of polymers.
New Materials Based on Acridine: Correlation Structure – Properties and Optoelectronic Applications
Original Research Article
Journal of Chemistry and Materials Research Vol. 1 (4), 2014, 112–122
Hayat Sadki, Samir Chtita, Mohammed Naciri Bennani, Tahar Lakhlifi, Mohammed Bouachrine*
COPPER (II) PHENANTHROLINE COMPLEXES: SYNTHESIS, SPECTROSCOPIC STUDY AND ELEC...EDITOR IJCRCPS
Reaction of copper chloride [CuCl2] with NaaiR´ in acetone medium following ligand(1-10 phenanthroline) addition leads to
[Cu(NaaiR/)(phen)] where NaaiR/ = naphthylazo imidazole /benzimidazole /pyridine = -C10H4-N=N- / -C3H2-NN-1-R/, (R =
imidazole) / -C7H4-NN-1-H (Benzimidazole), / -C3H4-N-(Pyridine), abbreviated as -N,N/-chelator, where -N(imidazole) and -N(azo)
represent N and N/, respectively; R/ = H(a), Me (b)]. The 1H NMR spectral measurements suggest the molecular structure of the
chelated complex with the protons at the aromatic region and naphthyl protons at higher ∂ value. 13C NMR spectrum suggest the
molecular skeleton. The voltammogramalso shows a small anodic peak at 0.2 V, possibly due to the Cu(I)/Cu(0) couple.
Keywords: Copper(II), Naphthylazoimidazole, NMR, IR, ESIMS.
Effect of Water And Ethyl Alcohol Mixed Solvent System on the Stability of Be...IJERDJOURNAL
ABSTRACT: The stabilities of ternary complexes of metal ions (copper, nickel, zinc and cobalt) with betahydroxy ketone(BHK) derivatives and benzotriazole(BTAZ) derivatives in various mixed solvent systems (Water+Ethyl Alcohol) medium in 0.1 M KNO3 ionic strength at 250C using pH metric titration method have been established. The data reveal that the copper forms more stable complexes, which is followed by zinc and Ni complexes with these ligands. Cobalt form less stable complexes with these ligands. The stabilities of these complexes are further quantified with Δ log K values, intra-molecular equilibrium constants and percentage of stacking interaction in the ternary systems. The observed positive Δ log K values suggest that the flexible side chain alkyl moiety (ethyl group, butyl group) or aromatic moiety (phenyl group) in BHK ligand overlaps with the fixed aromatic moiety of BTAZ ligand in the ternary complex, which results in the enhanced stabilities for the (BHK-Alk)-Metal(II)-BTAZ and (BHK-Ph)-Metal(II)-BTAZ systems. Interestingly, the positive Δ log K values for both BHK-Alk and BHK-Ph ligands in their corresponding ternary complexes are about the same. This suggests the flexible Alkyl or phenyl side chain of BHK is overlapping with the triazole ring, but not the phenoxy ring of the BTAZ ligand.
Aminic nitrogen- bearing polydentate Schiff base compounds as corrosion inhibitors for iron in acidic and alkaline media: A combined experimental and DFT studies
Loutfy H. Madkour 1,*, S. K. Elroby2
High Entropy Alloy was discovered in 1996. Being a completely new topic, it is unknown to us in all aspects. It's excellent combination of all mechanical properties is representing a new frontier in Materials Engineering field of research.
COPPER (II) PHENANTHROLINE COMPLEXES: SYNTHESIS, SPECTROSCOPIC STUDY AND ELEC...EDITOR IJCRCPS
Reaction of copper chloride [CuCl2] with NaaiR´ in acetone medium following ligand(1-10 phenanthroline) addition leads to
[Cu(NaaiR/)(phen)] where NaaiR/ = naphthylazo imidazole /benzimidazole /pyridine = -C10H4-N=N- / -C3H2-NN-1-R/, (R =
imidazole) / -C7H4-NN-1-H (Benzimidazole), / -C3H4-N-(Pyridine), abbreviated as -N,N/-chelator, where -N(imidazole) and -N(azo)
represent N and N/, respectively; R/ = H(a), Me (b)]. The 1H NMR spectral measurements suggest the molecular structure of the
chelated complex with the protons at the aromatic region and naphthyl protons at higher ∂ value. 13C NMR spectrum suggest the
molecular skeleton. The voltammogramalso shows a small anodic peak at 0.2 V, possibly due to the Cu(I)/Cu(0) couple.
Keywords: Copper(II), Naphthylazoimidazole, NMR, IR, ESIMS.
Effect of Water And Ethyl Alcohol Mixed Solvent System on the Stability of Be...IJERDJOURNAL
ABSTRACT: The stabilities of ternary complexes of metal ions (copper, nickel, zinc and cobalt) with betahydroxy ketone(BHK) derivatives and benzotriazole(BTAZ) derivatives in various mixed solvent systems (Water+Ethyl Alcohol) medium in 0.1 M KNO3 ionic strength at 250C using pH metric titration method have been established. The data reveal that the copper forms more stable complexes, which is followed by zinc and Ni complexes with these ligands. Cobalt form less stable complexes with these ligands. The stabilities of these complexes are further quantified with Δ log K values, intra-molecular equilibrium constants and percentage of stacking interaction in the ternary systems. The observed positive Δ log K values suggest that the flexible side chain alkyl moiety (ethyl group, butyl group) or aromatic moiety (phenyl group) in BHK ligand overlaps with the fixed aromatic moiety of BTAZ ligand in the ternary complex, which results in the enhanced stabilities for the (BHK-Alk)-Metal(II)-BTAZ and (BHK-Ph)-Metal(II)-BTAZ systems. Interestingly, the positive Δ log K values for both BHK-Alk and BHK-Ph ligands in their corresponding ternary complexes are about the same. This suggests the flexible Alkyl or phenyl side chain of BHK is overlapping with the triazole ring, but not the phenoxy ring of the BTAZ ligand.
Aminic nitrogen- bearing polydentate Schiff base compounds as corrosion inhibitors for iron in acidic and alkaline media: A combined experimental and DFT studies
Loutfy H. Madkour 1,*, S. K. Elroby2
High Entropy Alloy was discovered in 1996. Being a completely new topic, it is unknown to us in all aspects. It's excellent combination of all mechanical properties is representing a new frontier in Materials Engineering field of research.
The inhibitive performance of seven synthesized
2-(2-benzimidazolyl)-4 (phenylazo) phenol (BPP_1–7)
derivatives was investigated experimentally on the corrosion
of copper in 2.0 MHNO3 acid using mass loss, thermometric
and DC potentiodynamic polarization techniques. Quantum
chemical calculations was investigated to correlate the
electronic structure parameters of the investigated benzimidazole
derivatives with their inhibition efficiencies (IE%)
values. Global reactivity parameters such as EHOMO, ELUMO,
the energy gap between ELUMO and EHOMO (DE), chemical
hardness, softness, electronegativity, proton affinity, electrophilicity
and nucleophilicity have been calculated and
discussed. Molecular dynamics simulation was applied on
the compounds, to optimize the equilibrium configurations
of the molecules on the copper surface
Journal of the Taiwan Institute of Chemical Engineers 0 0 0 (2016) 1–20Al Baha University
Quantum chemical calculations, molecular dynamics simulation and experimental studies of using some azo dyes as corrosion inhibitors for iron. Part 1: Mono-azo dye derivatives
Inhibition, kinetic and thermodynamic effects of new Azo derivatives on iron ...Al Baha University
This investigation is designed to apply an advanced kinetic-thermodynamic model on the experimental data obtained from acidic and alkaline corrosion of iron using mono- and bis-azo dyes as corrosion inhibitors. The inhibition properties of the tested azo dyes on corrosion of iron in HNO3 and NaOH media were analyzed by gravimetric, thermometric and polarization measurements. The three studied methods gave consistent results. Polarization study showed that all the inhibitors are mixed type in acidic, act mainly as cathodic in alkaline solution. The synthesized azo dye derivatives exhibit good inhibition properties, obeys the Frumkin adsorption isotherm. The large values of the change in the standard free energy of adsorption (∆Goads), equilibrium constant (Kads) and binding constant (Kb) revealed that the reactions proceed spontaneously and result in highly efficient physisorption mechanism and stronger electrical interaction between the double layer existing at the phase boundary and the adsorbing molecules. The inhibition efficiency depends on the number of adsorption oxygen sites (OH and OMe groups), their charge density and π-electron clouds. The inhibition efficiency evaluated via theoretical methods was well accorded with reported experimental ones, following the same order as: -naphthyl- ligand > -naphthyl>p-anisdine>p-toluidine >o-toluidine >m-toluidine derivative. This research might provide a theoretical inhibition performance evaluation approach for homologous inhibitors.
Studies of the Atomic and Crystalline Characteristics of Ceramic Oxide Nano P...albertdivis
In the present study, some transition metal oxides (Zinc oxide, iron oxide and copper oxide) which are widely used in the fabrication of electronic devices were selected and subjected to biofield treatment.
Effect of calcination on the electrical properties and quantum confinement of...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Effect of calcination on the electrical properties and quantum confinement of...eSAT Journals
Abstract Fe2O3 nanoparticles have been prepared by a simple solvothermal method using a domestic microwave oven. X-ray powder diffraction measurement indicates the amorphous nature of the as-prepared sample. Calcined samples were obtained by annealing the as-prepared sample at different temperatures, viz. 400, 500, 600 and 700oC. Transmission electron microscopic images indicate that all the five samples are spherical in shape. AC electrical measurements were carried out on pelletized samples by the parallel plate capacitor method at various temperatures ranging from 40-130oC and frequencies ranging from 100 Hz -1 MHz. Results indicate low AC electrical conductivities and consequently show the occurrence of nano confined states. The exciton Bohr radii obtained from the dielectric constant values at 40oC temperature and 1 kHz frequency are 41.8, 54.8, 55.3, 56.3 and 27.0 respectively for the as-prepared sample and samples calcined at 400, 500, 600 and 700oC which indicate a strong quantum confinement effect. The impedance spectra observed exhibit non-ideal behavior. Keywords: Semiconductors, Magnetic materials, Nanoparticles, Electrical properties
Studies of the Atomic and Crystalline Characteristics of Ceramic Oxide Nano P...Mahendra Kumar Trivedi
In the present study, some transition metal oxides (Zinc oxide, iron oxide and copper oxide) which are widely used in the fabrication of electronic devices were selected and subjected to biofield treatment.
2. order: Inh5 N Inh4 N Inh3 N Inh2 N Inh1. The goal of this work is to
investigate the inhibitive performances of molecules synthesized
by aforementioned scientists against the corrosion of iron using
DFT and molecular dynamics simulations approaches and to theo-
retically predict the most effective inhibitor among them.
2. Computational details
2.1. Quantum chemical calculations
In the section based on DFT calculations of this study, all calculations
were carried out using HF and DFT/B3LYP methods with SDD, 6-
31++G (d, p) and 6-31 G basis sets of Gaussian program [26]. For op-
timization of molecules was performed with the help of 6-31++G (d,
p) basis set because this basis set is known as one of the basis sets
that gives more accurate results in terms of the determination of geom-
etries and electronic properties for a wide range of organic compounds.
Quantum chemical parameters such as the energy of the highest occu-
pied molecular orbital (EHOMO), the energy of the lowest unoccupied
molecular orbital (ELUMO), HOMO–LUMO energy gap (ΔE), chemical
hardness, softness, electronegativity, proton affinity, electrophilicity,
nucleophilicity and sum of electronic and zero-point energies (SEZPE)
were calculated and discussed.
Density functional theory of chemical reactivity is called as concep-
tual density functional theory (CDFT) [27]. Conceptual density function-
al theory that is a subfield of DFT helps understand and predict the
chemical behaviors of molecules. Via the mentioned theory, chemical
reactivity descriptors such as chemical potential, electronegativity and
chemical hardness are defined as below as the derivative of electronic
energy (E) with respect to number of electron (N) at a constant external
potential υ(r) [28,29].
χ ¼ −μ ¼ −
∂E
∂N
υ rð Þ
ð1Þ
η ¼
1
2
∂μ
∂N
υ rð Þ
¼
1
2
∂
2
E
∂N2
!
υ rð Þ
: ð2Þ
Pearson and Parr obtained the mathematical formulations based on
ionization energy and electron affinity values of chemical compounds
for aforementioned reactivity descriptors by applying the finite differ-
ences approximation [30] to Eqs. (1) and (2). These formulas obtained
are given as:
η ¼
I−A
2
ð3Þ
χ ¼ −μ ¼
I þ A
2
: ð4Þ
Koopmans's Theorem [31] that presents an alternative method to
predict the ionization energy and electron affinities of molecules is
quite important in terms of the calculation based on frontier orbital
energies of chemical reactivity descriptors. This theory states that
the negative value of highest occupied and lowest unoccupied
Fig. 1. Chemical structures of studied thiazole and thiadiazole derivatives.
498 S. Kaya et al. / Journal of Molecular Liquids 219 (2016) 497–504
3. molecular orbital energy correspond to ionization energy and elec-
tron affinity respectively (−EHOMO = I and −ELUMO = A). If so, with-
in the framework of the theory, chemical hardness, chemical
potential and electronegativity can be calculated with the help of
the following equations [32].
μ ¼ −χ ¼
ELUMO þ EHOMO
2
ð5Þ
η ¼
ELUMO−EHOMO
2
: ð6Þ
R.G. Pearson who put forward the chemical hardness concept
proposed the softness as the multiplicative inverse of hardness
[33].
σ ¼
1
η
¼
2
ELUMO‐EHOMO
: ð7Þ
The electrophilicity [34] is a useful reactivity descriptor that can be
used to compare the electron-donating abilities of molecules. In recent
times, electrophilicity index proposed by Parr [35] has been widely
used in many studies regarding site selectivity, toxicity and corrosion
inhibition performance of molecules. This index mentioned is defined
mathematically by Eq. (8). In addition, it is important to note that Parr
is also presented as the multiplicative inverse of the electrophilicity
the nucleophilicity.
ω ¼
μ2
2η
¼
χ2
2η
ð8Þ
ε ¼ 1=ω: ð9Þ
For the prediction of the proton affinities of molecules, in general,
the following equations are considered.
PA ¼ E proð Þ− E non‐proð Þ þ EHþ
À Á
ð10Þ
where, Enon-pro and Epro are the energies of the non-protonated and pro-
tonated inhibitors, respectively. EH
+
is the energy of H+
ion and was cal-
culated as:
EHþ ¼ E H3Oþ
ð Þ−E H2Oð Þ: ð11Þ
2.2. Molecular dynamics simulation
MD simulation is very popular for the investigation regarding the in-
teraction between the inhibitor molecule and the concerned metal sur-
face [36–38]. The interaction between inhibitors and the iron (Fe)
Table 1
Calculated quantum chemical parameters for non-protonated molecules in gas phase.
EHOMO
(eV)
ELUMO
(eV)
I A ΔE η σ χ PA ω ε Energy
(eV)
HF/SDD level
Inh 1 −8.20348 2.12332 8.20348 −2.12332 10.32680 5.16340 0.19367 3.04008 −1.08055 0.89496 1.11737 −35659.24878
Inh 2 −8.16430 2.05312 8.16430 −2.05312 10.21741 5.10871 0.19574 3.05559 −1.09258 0.91380 1.09434 −23514.10801
Inh 3 −7.86905 2.67925 7.86905 −2.67925 10.54830 5.27415 0.18960 2.59490 −1.25019 0.63835 1.56654 −25208.97786
Inh 4 −9.03099 3.21151 9.03099 −3.21151 12.24250 6.12125 0.16337 2.90974 −0.81553 0.69157 1.44598 −58450.70497
Inh 5 −8.99534 3.29342 8.99534 −3.29342 12.28876 6.14438 0.16275 2.85096 −0.84982 0.66141 1.51191 −59511.86907
HF/6-31G level
Inh 1 −8.23967 2.27652 8.23967 −2.27652 10.51619 5.25810 0.19018 2.98158 −1.13236 0.84534 1.18295 −35662.07454
Inh 2 −8.16593 2.29367 8.16593 −2.29367 10.45959 5.22980 0.19121 2.93613 −1.16229 0.82421 1.21329 −93155.95048
Inh 3 −7.88919 2.86593 7.88919 −2.86593 10.75511 5.37756 0.18596 2.51163 −1.31454 0.58654 1.70492 −25210.92374
Inh 4 −9.00595 2.82538 9.00595 −2.82538 11.83133 5.91567 0.16904 3.09029 −0.87257 0.80717 1.23890 −58454.86135
Inh 5 −8.98037 2.89531 8.98037 −2.89531 11.87569 5.93784 0.16841 3.04253 −0.90087 0.77949 1.28289 −59516.09726
HF/6-31++G level
Inh 1 −8.25818 0.95295 8.25818 −0.95295 9.21113 4.60556 0.21713 3.65261 −1.05374 1.44842 0.69041 −35658.93759
Inh 2 −8.01926 0.93771 8.01926 −0.93771 8.95697 4.47849 0.22329 3.54077 −0.99785 1.39970 0.71444 −93084.48738
Inh 3 −7.94579 0.99431 7.94579 −0.99431 8.94010 4.47005 0.22371 3.47574 −1.21756 1.35130 0.74003 −25207.87473
Inh 4 −9.05575 0.92138 9.05575 −0.92138 9.97713 4.98857 0.20046 4.06718 −0.79464 1.65799 0.60314 −58449.85096
Inh 5 −9.02609 0.94207 9.02609 −0.94207 9.96815 4.98408 0.20064 4.04201 −0.82811 1.63901 0.61013 −59510.91086
B3LYP/SDD level
Inh 1 −5.71035 −1.48004 5.71035 1.48004 4.23032 2.11516 0.47278 3.59520 −1.25791 3.05543 0.32729 −35778.53094
Inh 2 −5.71362 −1.52031 5.71362 1.52031 4.19331 2.09665 0.47695 3.61697 −1.20064 3.11984 0.32053 −23620.39132
Inh 3 −5.36531 −1.06561 5.36531 1.06561 4.29970 2.14985 0.46515 3.21546 −1.46709 2.40462 0.41587 −25319.10174
Inh 4 −6.09676 −0.81907 6.09676 0.81907 5.27769 2.63884 0.37895 3.45791 −1.07709 2.26561 0.44138 −58622.23552
Inh 5 −6.06193 −0.74206 6.06193 0.74206 5.31987 2.65993 0.37595 3.40199 −1.08907 2.17554 0.45966 −59691.19846
B3LYP/6-31G level
Inh 1 −5.82764 −1.44412 5.82764 1.44412 4.38352 2.19176 0.45625 3.63588 −1.23209 3.01575 0.33159 −35781.63412
Inh 2 −5.77212 −1.40602 5.77212 1.40602 4.36610 2.18305 0.45807 3.58907 −1.27024 2.95033 0.33894 −93303.89796
Inh 3 −5.45919 −0.96656 5.45919 0.96656 4.49264 2.24632 0.44517 3.21287 −1.44954 2.29766 0.43523 −25321.36833
Inh 4 −6.19037 −0.86778 6.19037 0.86778 5.32259 2.66129 0.37576 3.52907 −1.12077 2.33990 0.42737 −58626.56031
Inh 5 −6.16778 −0.79540 6.16778 0.79540 5.37239 2.68619 0.37227 3.48159 −1.04825 2.25625 0.44321 −59695.60473
B3LYP/6-31++G level
Inh 1 −5.85539 −1.55678 5.85539 1.55678 4.29862 2.14931 0.46527 3.70608 −1.15290 3.19523 0.31297 −35777.92483
Inh 2 −5.78709 −1.60902 5.78709 1.60902 4.17807 2.08903 0.47869 3.69806 −1.18630 3.27319 0.30551 −93233.27790
Inh 3 −5.53402 −1.14751 5.53402 1.14751 4.38651 2.19325 0.45594 3.34077 −1.34243 2.54433 0.39303 −25317.91825
Inh 4 −6.24942 −1.06697 6.24942 1.06697 5.18245 2.59122 0.38592 3.65819 −0.93630 2.58225 0.38726 −58620.74903
Inh 5 −6.22411 −0.98452 6.22411 0.98452 5.23959 2.61980 0.38171 3.60431 −0.96368 2.47940 0.40332 −59689.63088
499S. Kaya et al. / Journal of Molecular Liquids 219 (2016) 497–504
4. surface was simulated by the Forcite module from Accelrys Inc. [39,40].
Herein, the Fe(110) surface was chosen to simulate the adsorption pro-
cess. The simulation of the interaction was carried out in a simulation
box (2.48 × 2.48 × 3.81 nm) with periodic boundary conditions. Five
layers of iron atoms were used to ensure that the depth of the surface
was greater than the non-bond cutoff used in the calculation.
COMPASS forcefield [41] was chosen to optimize the structures of all
components of the system. The MD simulation is performed at 298.0 K
under canonical ensemble (NVT) using a time step of 1.0 fs and a simu-
lation time of 600 ps. Details of simulation process can be referred to
some previous literature [42,43].
The interaction energy between the inhibitor molecules and the
Fe(110) surface is calculated by Eq. (12)
Einteraction ¼ Etotal− Esurface þ Einhibitorð Þ: ð12Þ
Herein, the total energy of the surface and inhibitor molecule is
designated as Etotal, Esurface is the surface energy without the inhibi-
tor and Einhibitor is the energy of the adsorbed inhibitor on the sur-
face. The binding energy of the inhibitor molecule is expressed as
Ebinding = −Einteraction.
3. Results and discussion
In this theoretical study, to predict the corrosion inhibition perfor-
mance of thiazole and thiadiazole derivatives that their chemical struc-
tures are given in Fig. 1 against the corrosion of iron, quantum chemical
parameters widely considered in corrosion studies were calculated
using some methods and basis sets of Gaussian program and discussed.
For the analysis of the strength of the interactions between metal sur-
face and inhibitor molecules, molecular dynamics simulation approach
was used. All data obtained in the study and required discussions are
given below in detail.
Chemical reactivity descriptors such as EHOMO, ELUMO, ΔE (HOMO–
LUMO energy gap), chemical hardness, softness, electronegativity, pro-
ton affinity, electrophilicity and nucleophilicity give important clues
about electron-donating and accepting abilities of molecules. In the
present study, calculated chemical reactivity descriptors in both gas
phase and aqueous phase for the protonated and non-protonated
forms of studied thiazole and thiadizole derivatives are given in
Tables 1–4. The optimized structures, HOMOs, LUMOs and electrostatic
potential structures of studied compounds are given in Fig. 2.
In the defining of chemical reactivity or stability of molecules, the
energies of highest occupied molecular orbital and lowest unoccupied
molecular orbital are important tools. Fukui recognized the importance
of the frontier orbitals in chemical reactions and the analysis of the reac-
tivity. Later on, Parr and Yang demonstrated that density functional the-
ory [33] and molecular orbital theory can be considered in conjunction
for reactivity analysis. EHOMO and ELUMO are associated with electron-do-
nating ability and electron accepting ability of a molecule, respectively.
In general, molecules having high EHOMO and high ELUMO are good corro-
sion inhibitors. It is important to note that a higher value of EHOMO
means that the molecule tends to donate electrons to metal surface.
Within the framework this information given, considering HOMO and
Table 2
Calculated quantum chemical parameters for non-protonated molecules in aqueous phase.
EHOMO
(eV)
ELUMO
(eV)
I A ΔE η σ χ PA ω ε Energy
(eV)
HF/SDD level
Inh 1 −8.17409 2.04550 8.17409 −2.04550 10.21959 5.10979 0.19570 3.06430 −3.46576 0.91882 1.08836 −35659.65080
Inh 2 −8.14362 1.96794 8.14362 −1.96794 10.11156 5.05578 0.19779 3.08784 −3.45890 0.94295 1.06050 −23514.49760
Inh 3 −7.94633 2.49041 7.94633 −2.49041 10.43674 5.21837 0.19163 2.72796 −3.51797 0.71304 1.40245 −25209.51399
Inh 4 −9.14065 3.10294 9.14065 −3.10294 12.24359 6.12179 0.16335 3.01885 −3.26172 0.74435 1.34346 −58451.53522
Inh 5 −9.11779 3.16172 9.11779 −3.16172 12.27951 6.13975 0.16287 2.97804 −3.26232 0.72224 1.38459 −59512.77181
HF/6-31G level
Inh 1 −8.20702 2.22809 8.20702 −2.22809 10.43510 5.21755 0.19166 2.98947 −3.05494 0.85643 1.16764 −35782.44677
Inh 2 −8.15913 2.22509 8.15913 −2.22509 10.38422 5.19211 0.19260 2.96702 −2.44720 0.84775 1.17960 −93305.31003
Inh 3 −7.96048 2.69259 7.96048 −2.69259 10.65307 5.32653 0.18774 2.63395 −3.00033 0.65124 1.53554 −25322.42604
Inh 4 −9.13112 2.55816 9.13112 −2.55816 11.68929 5.84464 0.17110 3.28648 −3.22784 0.92400 1.08225 −58455.73403
Inh 5 −9.09058 3.01559 9.09058 −3.01559 12.10617 6.05308 0.16521 3.03749 −3.29029 0.76212 1.31213 −59516.97187
HF/6-31++G level
Inh 1 −8.22716 1.18697 8.22716 −1.18697 9.41413 4.70706 0.21245 3.52009 −3.45911 1.31622 0.75975 −35659.32250
Inh 2 −8.03831 1.19051 8.03831 −1.19051 9.22881 4.61441 0.21671 3.42390 −3.48124 1.27027 0.78723 −93084.87460
Inh 3 −8.00620 1.16493 8.00620 −1.16493 9.17113 4.58556 0.21808 3.42063 −3.50217 1.27582 0.78381 −25208.39915
Inh 4 −9.16623 1.31459 9.16623 −1.31459 10.48082 5.24041 0.19082 3.92582 −3.24031 1.47050 0.68004 −58450.68690
Inh 5 −9.14745 1.32330 9.14745 −1.32330 10.47075 5.23538 0.19101 3.91208 −3.27786 1.46163 0.68417 −59511.80634
B3LYP/SDD level
Inh 1 −5.74138 −1.56684 5.74138 1.56684 4.17453 2.08727 0.47910 3.65411 −3.50594 3.19857 0.31264 −35778.89854
Inh 2 −5.74382 −1.59406 5.74382 1.59406 4.14977 2.07488 0.48195 3.66894 −3.51120 3.24382 0.30828 −23620.75288
Inh 3 −5.49565 −1.27867 5.49565 1.27867 4.21698 2.10849 0.47427 3.38716 −3.58119 2.72064 0.36756 −25319.60246
Inh 4 −6.22629 −0.96846 6.22629 0.96846 5.25783 2.62891 0.38039 3.59737 −3.31560 2.46130 0.40629 −58622.99236
Inh 5 −6.20207 −0.91132 6.20207 0.91132 5.29075 2.64538 0.37802 3.55669 −3.32586 2.39098 0.41824 −59692.01454
B3LYP/6-31G level
Inh 1 −5.81430 −1.52031 5.81430 1.52031 4.29399 2.14700 0.46577 3.66731 −3.52448 3.13208 0.31928 −35781.97723
Inh 2 −5.78491 −1.50317 5.78491 1.50317 4.28175 2.14087 0.46710 3.64404 −3.52663 3.10131 0.32244 −93304.23060
Inh 3 −5.57892 −1.15513 5.57892 1.15513 4.42379 2.21189 0.45210 3.36703 −3.59550 2.56271 0.39021 −25321.83087
Inh 4 −6.29676 −0.99105 6.29676 0.99105 5.30572 2.65286 0.37695 3.64391 −3.32205 2.50259 0.39959 −58627.20877
Inh 5 −6.27989 −0.93880 6.27989 0.93880 5.34109 2.67055 0.37446 3.60935 −3.33064 2.43909 0.40999 −59696.35297
B3LYP/6-31++G level
Inh 1 −5.83090 −1.59814 5.83090 1.59814 4.23276 2.11638 0.47250 3.71452 −3.44973 3.25973 0.30677 −35778.27169
Inh 2 −5.79090 −1.63106 5.79090 1.63106 4.15984 2.07992 0.48079 3.71098 −3.45650 3.31056 0.30206 −93233.62025
Inh 3 −5.62056 −1.29799 5.62056 1.29799 4.32256 2.16128 0.46269 3.45927 −3.50187 2.76840 0.36122 −25318.39943
Inh 4 −6.34847 −1.10098 6.34847 1.10098 5.24748 2.62374 0.38113 3.72472 −3.23933 2.64385 0.37824 −58621.50693
Inh 5 −6.33132 −1.05418 6.33132 1.05418 5.27715 2.63857 0.37899 3.69275 −3.29062 2.58405 0.38699 −59690.43142
500 S. Kaya et al. / Journal of Molecular Liquids 219 (2016) 497–504
5. LUMO energy values given in related tables for non-protonated forms of
studied molecules, it can be said that the inhibition efficiencies accord-
ing to LUMO energies [4] obey the order: Inh5 N Inh4 N Inh3 N
Inh2 N Inh1 but we could not get compatible result with experimental
data in terms of HOMO energies.
Chemical hardness, softness and HOMO–LUMO energy gap are
closely interrelated chemical properties. According to Maximum Hard-
ness Principle [44], chemical hardness is a measure of the stability of
chemical species. More stable molecules have large HOMO–LUMO ener-
gy gap and less stable molecules have small HOMO–LUMO gap. Softness
is a measure of the polarizability and soft molecules give more easily
electrons to an electron acceptor molecule or surface [45]. It is apparent
that we can write the same corrosion inhibition ranking considering
these aforementioned chemical properties. On the basis of the calculat-
ed chemical hardness, softness and energy gap given in the related ta-
bles, the corrosion inhibition efficiency ranking of studied chemical
compounds can be written as: Inh2 N Inh1 N Inh3 N Inh4 N Inh5. Accord-
ing to Ebenso at al. [46], molecular geometry is an important factor that
determines the degree of adsorption of inhibitor molecules on metal
surface. Because of the planar geometry of the inhibitor molecule, in
such a case that metal surface and molecule plane are parallel to each
other, molecular adsorption is stronger. The inhibition efficiency rank-
ing obtained for studied molecules considering chemical hardness, soft-
ness and HOMO–LUMO energy gap values calculated is inconsistent
with experimental data. As can be clearly seen from Fig. 3, this result
can be explained through molecular geometries of inhibitors.
Electronegativity that represents the power to attract the electrons
of chemical species is a useful quantity in the prediction of inhibitive
performance of molecules. In addition, this parameter has an important
function in the determination of fraction of electrons transferred from
inhibitor molecule to metal surface. Tables 1 and 2 show the electroneg-
ativity values calculated using different basis sets and methods for stud-
ied molecules. A good corrosion inhibitor has low χ value. For this
reason, looking at electronegativity values in related tables, it can be
said that the inhibition efficiencies of studied molecules obey the
order: Inh3 N Inh5 N Inh4 N Inh2 b Inh1.
Electrophilicity and nucleophilicity are useful quantum chemical pa-
rameters for the prediction chemical behavior of molecules and these
quantities can be used to compare the efficiencies of the inhibitor mol-
ecules. It should be noted that a molecule that has large electrophilicity
value is powerless in terms of the prevention of corrosion. On the other
hand, a molecule that has large nucleophilicity value is a good corrosion
inhibitor. Predicted corrosion inhibition efficiency ranking obtained
considering electrophilicity and nucleophilicity values of studied mole-
cules can be given as: Inh5 N Inh3 N Inh4 N Inh2 N Inh1.
G.N. Lewis defined the base as electron pair donor [47]. Proton affinity
that is defined as the enthalpy of the reaction with H+
ion of a chemical
species in gas phase is a measure of the basicity. This parameter is quite
important to compare the electron-donating abilities of molecules. The
presence of the heteroatoms such as nitrogen and sulfur in the molecules
of thiazole and thiadiazole derivatives leads to high tendency for proton-
ation in acidic medium. Thus, analysis of the protonated forms of studied
Table 3
Calculated quantum chemical parameters for protonated molecules in gas phase.
EHOMO
(eV)
ELUMO
(eV)
I A ΔE η σ χ ω ε Energy
(eV)
HF/SDD level
Inh 1 −12.04440 −2.25040 12.04440 2.25040 9.79400 4.89700 0.20421 7.14740 5.21598 0.19172 −35667.68933
Inh 2 −11.81201 −2.23679 11.81201 2.23679 9.57522 4.78761 0.20887 7.02440 5.15312 0.19406 −23522.56059
Inh 3 −11.47241 −1.97856 11.47241 1.97856 9.49386 4.74693 0.21066 6.72548 4.76436 0.20989 −25217.58805
Inh 4 −10.81443 −2.19761 10.81443 2.19761 8.61683 4.30841 0.23210 6.50602 4.91229 0.20357 −58458.88050
Inh 5 −10.54313 −2.15135 10.54313 2.15135 8.39179 4.19589 0.23833 6.34724 4.80082 0.20830 −59520.07889
HF/6-31G level
Inh 1 −12.09692 −2.16659 12.09692 2.16659 9.93033 4.96516 0.20140 7.13175 5.12187 0.19524 −35670.56690
Inh 2 −11.81881 −2.13094 11.81881 2.13094 9.68787 4.84394 0.20644 6.97488 5.02163 0.19914 −93164.47277
Inh 3 −11.47241 −1.90427 11.47241 1.90427 9.56814 4.78407 0.20903 6.68834 4.67529 0.21389 −25219.59828
Inh 4 −10.78994 −2.18917 10.78994 2.18917 8.60077 4.30038 0.23255 6.48955 4.89658 0.20422 −58463.09392
Inh 5 −10.52572 −2.16659 10.52572 2.16659 8.35913 4.17957 0.23926 6.34615 4.81792 0.20756 −59524.35813
HF/6-31++G level
Inh 1 −12.08358 −3.11464 12.08358 3.11464 8.96894 4.48447 0.22299 7.59911 6.43849 0.15532 −35667.35133
Inh 2 −11.70834 −3.09505 11.70834 3.09505 8.61329 4.30664 0.23220 7.40169 6.36053 0.15722 −93092.84523
Inh 3 −11.49962 −3.00198 11.49962 3.00198 8.49764 4.24882 0.23536 7.25080 6.18691 0.16163 −25216.45229
Inh 4 −10.83076 −3.26158 10.83076 3.26158 7.56918 3.78459 0.26423 7.04617 6.55930 0.15246 −58458.00560
Inh 5 −10.57143 −3.24253 10.57143 3.24253 7.32890 3.66445 0.27289 6.90698 6.50936 0.15362 −59519.09897
B3LYP/SDD level
Inh 1 −9.68107 −5.97920 9.68107 5.97920 3.70187 1.85093 0.54027 7.83014 16.56220 0.06038 −35787.14885
Inh 2 −9.50855 −5.98682 9.50855 5.98682 3.52173 1.76086 0.56790 7.74769 17.04467 0.05867 −23628.95196
Inh 3 −9.19344 −5.68505 9.19344 5.68505 3.50839 1.75420 0.57006 7.43924 15.77428 0.06339 −25327.92883
Inh 4 −7.93354 −6.12370 7.93354 6.12370 1.80984 0.90492 1.10507 7.02862 27.29601 0.03664 −58630.67261
Inh 5 −7.65653 −6.08778 7.65653 6.08778 1.56875 0.78437 1.27490 6.87215 30.10456 0.03322 −59699.64753
B3LYP/6-31G level
Inh 1 −9.83400 −5.98111 9.83400 5.98111 3.85289 1.92645 0.51909 7.90755 16.22922 0.06162 −35790.22621
Inh 2 −9.55481 −5.92614 9.55481 5.92614 3.62867 1.81433 0.55117 7.74048 16.51156 0.06056 −93312.52820
Inh 3 −9.26691 −5.67525 9.26691 5.67525 3.59166 1.79583 0.55685 7.47108 15.54074 0.06435 −25330.17787
Inh 4 −8.34961 −5.92587 8.34961 5.92587 2.42374 1.21187 0.82517 7.13774 21.02015 0.04757 −58635.04108
Inh 5 −7.75803 −6.10628 7.75803 6.10628 1.65174 0.82587 1.21084 6.93216 29.09335 0.03437 −59704.01298
B3LYP/6-31++G level
Inh 1 −9.78910 −5.99744 9.78910 5.99744 3.79166 1.89583 0.52747 7.89327 16.43175 0.06086 −35786.43773
Inh 2 −9.56488 −5.96424 9.56488 5.96424 3.60064 1.80032 0.55546 7.76456 16.74380 0.05972 −93241.82420
Inh 3 −9.29439 −5.72586 9.29439 5.72586 3.56853 1.78426 0.56045 7.51013 15.80540 0.06327 −25326.62068
Inh 4 −8.06742 −6.15526 8.06742 6.15526 1.91216 0.95608 1.04594 7.11134 26.44717 0.03781 −58629.04533
Inh 5 −7.80401 −6.12724 7.80401 6.12724 1.67678 0.83839 1.19276 6.96563 28.93640 0.03456 −59697.95456
501S. Kaya et al. / Journal of Molecular Liquids 219 (2016) 497–504
6. molecules is important in terms of the calculation of the proton affinities
of neutral inhibitors. According to proton affinity values given in the
Tables 1 and 2 for studied compounds, the inhibition efficiencies of men-
tioned compounds follow the order: Inh3 N Inh2 N Inh1 N Inh5 N Inh4.
Here, we could not get compatible results with experimental data and
molecular simulation approach.
3.1. Molecular dynamics simulations
In recent times, molecular dynamics simulation approach is widely
used for the calculation of binding and interaction energies of inhibitor
molecules on metal surface. Large negative values of interaction ener-
gies mean that the interaction between inhibitor molecule and Fe sur-
face is strong. It is apparent that Inh5 has more negative interaction
energy compared to other inhibitors. Moreover, it is important to note
that adsorption abilities on Fe surface of inhibitor molecules can be pre-
dicted via binding energies given in Table 5. According to interaction en-
ergy and binding energy values calculated with the help of molecular
dynamics simulation approach, corrosion inhibition performances of
studied inhibitors against the corrosion of iron can be given as:
Inh5 N Inh4 N Inh2 N Inh1 N Inh3. Actually, this ranking is compatible
with inductive effects of functional groups bonded to aromatic ring
and Hard and Soft Acid–Base (HSAB) Principle [48,49]. Within the
framework of HSAB Principle, S containing molecular structures act as
soft base generally. Soft molecules are polarizable and give easily elec-
trons to an electron acceptor molecule and surface. It is clearly seen
from Fig. 1, Inh5 and Inh4 have two sulfur atoms in their molecular
structure. If so, these molecules can be strongly adsorbed to metal sur-
face. Many papers have been published about that chain length in mol-
ecule plays important role corrosion inhibition properties of molecules.
S. Yoo et al. [50] noted that adsorption equilibrium constant increases as
chain length increases. From the light of this information, it can be said
that Inh5 should be more effective inhibitor compared to Inh4 because
the chain between two aromatic rings is longer.
As is known, inductive effect is the effect on electron density due to
electron-withdrawing or electron-donating groups in a molecule. The
molecules including electron-donating groups give more easily elec-
trons to an electron acceptor molecule or surface. If so, the differences
between the binding energies calculated given in Table 5 for Inh 1,
Inh2 and Inh 3 can be explained with the help of inductive effects of
OH,Cl andBr groups. The electron-withdrawing powers of men-
tioned groups obey the order –OH ≥ Cl N Br. For this reason, for inhibi-
tion efficiencies of Inh1, Inh2 and Inh3, we can write the following
order: Inh2 N Inh1 N Inh3.
4. Conclusion
Hartree Fock (HF), density functional theory at B3LYP with different
basis sets and molecular dynamic simulation approach were employed
to evaluate the corrosion inhibition efficiencies of some thiazole and
thiadiazole derivatives at the molecular level. The neutral and protonat-
ed forms were considered in quantum chemical calculations in gas and
Table 4
Calculated quantum chemical parameters for protonated molecules in aqueous phase.
EHOMO
(eV)
ELUMO
(eV)
I A ΔE η σ χ ω ε Energy
(eV)
HF/SDD level
Inh 1 −9.27861 1.26289 9.27861 −1.26289 10.54150 5.27075 0.18973 4.00786 1.52378 0.65626 −35670.47656
Inh 2 −9.19752 1.24684 9.19752 −1.24684 10.44436 5.22218 0.19149 3.97534 1.51310 0.66090 −23525.31650
Inh 3 −8.77656 1.49065 8.77656 −1.49065 10.26721 5.13360 0.19479 3.64295 1.29257 0.77365 −25220.39196
Inh 4 −9.22854 1.62426 9.22854 −1.62426 10.85280 5.42640 0.18428 3.80214 1.33203 0.75073 −58462.15694
Inh 5 −9.15507 1.66698 9.15507 −1.66698 10.82205 5.41103 0.18481 3.74404 1.29531 0.77202 −59523.39413
HF/6-31G level
Inh 1 −7.07338 −2.46374 7.07338 2.46374 4.60965 2.30482 0.43387 4.76856 4.93296 0.20272 −35792.86171
Inh 2 −6.95148 −2.44796 6.95148 2.44796 4.50352 2.25176 0.44410 4.69972 4.90446 0.20390 −93315.11723
Inh 3 −6.49922 −2.27407 6.49922 2.27407 4.22515 2.11257 0.47336 4.38665 4.55432 0.21957 −25332.78637
Inh 4 −9.19371 1.63623 9.19371 −1.63623 10.82994 5.41497 0.18467 3.77874 1.31846 0.75846 −58466.32187
Inh 5 −9.12623 1.67324 9.12623 −1.67324 10.79947 5.39973 0.18519 3.72649 1.28587 0.77768 −59527.62216
HF/6-31++G level
Inh 1 −9.33739 0.97853 9.33739 −0.97853 10.31592 5.15796 0.19388 4.17943 1.69327 0.59057 −35670.14161
Inh 2 −9.23181 0.97935 9.23181 −0.97935 10.21115 5.10558 0.19586 4.12623 1.66737 0.59975 −93095.71584
Inh 3 −8.83180 0.98696 8.83180 −0.98696 9.81876 4.90938 0.20369 3.92242 1.56693 0.63819 −25219.26132
Inh 4 −9.25249 1.00520 9.25249 −1.00520 10.25768 5.12884 0.19498 4.12365 1.65773 0.60324 −58461.28721
Inh 5 −9.18555 1.00846 9.18555 −1.00846 10.19401 5.09700 0.19619 4.08854 1.63980 0.60983 −59522.44420
B3LYP/SDD level
Inh 1 −6.90766 −2.53068 6.90766 2.53068 4.37699 2.18849 0.45694 4.71917 5.08811 0.19654 −35789.76448
Inh 2 −6.87120 −2.54701 6.87120 2.54701 4.32420 2.16210 0.46251 4.70910 5.12827 0.19500 −23631.62408
Inh 3 −6.42439 −2.33965 6.42439 2.33965 4.08473 2.04237 0.48963 4.38202 4.70094 0.21272 −25330.54365
Inh 4 −6.30710 −2.46537 6.30710 2.46537 3.84173 1.92087 0.52060 4.38624 5.00792 0.19968 −58633.66796
Inh 5 −6.23962 −2.42347 6.23962 2.42347 3.81615 1.90808 0.52409 4.33154 4.91654 0.20340 −59702.70040
B3LYP/6-31G level
Inh 1 −7.07338 −2.46374 7.07338 2.46374 4.60965 2.30482 0.43387 4.76856 4.93296 0.20272 −35792.86171
Inh 2 −6.95148 −2.44796 6.95148 2.44796 4.50352 2.25176 0.44410 4.69972 4.90446 0.20390 −93315.11723
Inh 3 −6.49922 −2.27407 6.49922 2.27407 4.22515 2.11257 0.47336 4.38665 4.55432 0.21957 −25332.78637
Inh 4 −6.37595 −2.46428 6.37595 2.46428 3.91167 1.95583 0.51129 4.42012 4.99465 0.20021 −58637.89082
Inh 5 −6.31554 −2.42918 6.31554 2.42918 3.88636 1.94318 0.51462 4.37236 4.91913 0.20329 −59707.04361
B3LYP/6-31++G level
Inh 1 −7.00780 −2.49231 7.00780 2.49231 4.51549 2.25775 0.44292 4.75006 4.99681 0.20013 −35789.08142
Inh 2 −6.91855 −2.48932 6.91855 2.48932 4.42923 2.21462 0.45155 4.70393 4.99567 0.20017 −93244.43675
Inh 3 −6.51691 −2.33122 6.51691 2.33122 4.18569 2.09284 0.47782 4.42406 4.67601 0.21386 −25329.26130
Inh 4 −6.42711 −2.50047 6.42711 2.50047 3.92663 1.96332 0.50934 4.46379 5.07443 0.19707 −58632.10626
Inh 5 −6.36779 −2.46564 6.36779 2.46564 3.90214 1.95107 0.51254 4.41671 4.99914 0.20003 −59701.08204
502 S. Kaya et al. / Journal of Molecular Liquids 219 (2016) 497–504
7. aqueous phases. The following conclusions could be drawn from this
study:
(1) Studied thiazole and thiadiazole derivatives will be effective in
terms of the prevention of corrosion of iron.
(2) The results obtained in the study will be helpful in synthesis and
rational design of new thiazole and thiadiazole derivatives for
corrosion inhibition applications.
(3) DFT calculations cannot be compatible with experimental data
and the results of molecular dynamics simulation approach be-
cause of molecular geometries (planar or non-planar).
(4) Considering all data given in the study, we propose the inhibition
efficiency ranking of studied molecules in the prevention of cor-
rosion of iron as: Inh5 N Inh4 N Inh3 N Inh2 N Inh1.
(5) According to binding energies given in Table 5, the most effective
inhibitor against the corrosion of iron is Inh5.
Fig. 2. The optimized structures, HOMOs, LUMOs and electrostatic potential structures of non-protonated inhibitor molecules using DFT/B3LYP/6-31++G (d,p).
Fig. 3. Equilibrium adsorption configurations of the five compounds studied on Fe(110) surfaces obtained by molecular dynamics simulations (upper panels: side views; lower panels: top
views).
503S. Kaya et al. / Journal of Molecular Liquids 219 (2016) 497–504
8. References
[1] S.N. Raicheva, B.V. Aleksiev, E.I. Sokolova, Corros. Sci. 34 (1993) 343–350.
[2] H.D. Leçe, K.C. Emregül, O. Atakol, Corros. Sci. 50 (2008) 1460–1468.
[3] I.B. Obot, D.D. Macdonald, Z.M. Gasem, Corros. Sci. 99 (2015) 1–30.
[4] S. Kaya, B. Tuzun, C. Kaya, I.B. Obot, J. Taiwan Inst. Chem. Eng. 58 (2016) 528–535.
[5] M.A. Amin, et al., Electrochim. Acta 52 (2007) 3588–3600.
[6] R.I. Holland, Dent. Mater. 8 (4) (1992) 241–245.
[7] R.G. Duarte, A.S. Castela, R. Neves, L. Freire, M.F. Montemor, Electrochim. Acta 124
(2014) 218–224.
[8] S. Musić, M. Gotić, S. Popović, J. Mater. Sci. 28 (1993) 5744–5752.
[9] J.A. Walocha, J.A. Litwin, A.J. Miodoński, Hum. Reprod. 18 (2003) 1088–1093.
[10] S.Kr. Saha, P. Ghosh, A. Hens, N.C. Murmu, P. Banerjee, Phys. E. 66 (2015) 332–341.
[11] T. Chakraborty, A. Hens, S. Kulashrestha, N.C. Murmu, P. Banerjee, Phys. E. 69 (2015)
371–377.
[12] S.Kr. Saha, A. Hens, A. Roychowdhury, A.Kr. Lohar, N.C. Murmu, P. Banerjee, Can.
Chem. Trans. 2 (2014) 489–503.
[13] K.F. Khaled, Electrochim. Acta 53 (2008) 3484–3492.
[14] I.B. Obot, E.E. Ebenso, M.M. Kabanda, J. Environ. Chem. Eng. 1 (2013) 431–439.
[15] M.M. Kabanda, I.B. Obot, E.E. Ebenso, Int. J. Electrochem. Sci. 8 (2013) 10839–10850.
[16] I.B. Obot, N.O. Obi-Egbedi, Corros. Sci. 52 (2010) 657–660.
[17] S. Kaya, C. Kaya, Mol. Phys. 113 (2015) 1311–1319.
[18] S. Kaya, C. Kaya, Comput. Theor. Chem. 1060 (2015) 66–70.
[19] S. Kaya, C. Kaya, Comput. Theor. Chem. 1052 (2015) 42–46.
[20] W. Yang, C. Lee, S.K. Ghosh, J. Phys. Chem. 89 (1985) 5412–5414.
[21] Z.S. Safi, S. Omar, Chem. Phys. Lett. 610 (2014) 321–330.
[22] A. Döner, R. Solmaz, M. Ozcan, G. Kardaş, Corros. Sci. 53 (2011) 2902–2913.
[23] M.A. Quraishi, M. Wajid Khan, M. Ajmal, S. Muralidharan, S. Venkatakrishna Iyer,
Anti-Corros. Methods Mater. 43 (1996) 5–8.
[24] H. Tian, W. Li, K. Cao, B. Hou, Corros. Sci. 73 (2013) 281–291.
[25] I.H.R. Tomi, A.H.R. Al-Daraji, S.A. Aziz, Synth. React. Inorg. Met.-Org. Nano-Met.
Chem. 45 (2015) 605–613.
[26] M.J. Frisch, G.W. Trucks, H.B. Schlegel, G.E. Scuseria, M.A. Robb, J.R. Cheeseman Jr.,
J.A. Montgomery, T. Vreven, K.N. Kudin, J.C. Burant, J.M. Millam, S.S. Iyengar, J.
Tomasi, V. Barone, B. Mennucci, M. Cossi, G. Scalmani, N. Rega, G.A. Petersson, H.
Nakatsuji, M. Hada, M. Ehara, K. Toyota, R. Fukuda, J. Hasegawa, M. Ishida, T.
Nakajima, Y. Honda, O. Kitao, H. Nakai, M. Klene, X. Li, J.E. Knox, H.P. Hratchian,
J.B. Cross, V. Bakken, C. Adamo, J. Jaramillo, R. Gomperts, R.E. Stratmann, O.
Yazyev, A.J. Austin, R. Cammi, C. Pomelli, J.W. Ochterski, P.Y. Ayala, K. Morokuma,
G.A. Voth, P. Salvador, J.J. Dannenberg, V.G. Zakrzewski, S. Dapprich, A.D. Daniels,
M.C. Strain, O. Farkas, D.K. Malick, A.D. Rabuck, K. Raghavachari, J.B. Foresman, J.V.
Ortiz, Q. Cui, A.G. Baboul, S. Clifford, J. Cioslowski, B.B. Stefanov, G. Liu, A. Liashenko,
P. Piskorz, I. Komaromi, R.L. Martin, D.J. Fox, T. Keith, M.A. Al-Laham, C.Y. Peng, A.
Nanayakkara, M. Challacombe, P.M.W. Gill, B. Johnson, W. Chen, M.W. Wong, C.
Gonzalez, J.A. Pople, Gaussian 03 W, Gaussian Inc., Wallingford, CT, 2004.
[27] S. Kaya, C. Kaya, I.B. Obot, N. Islam, Spectrochim. Acta A Mol. Biomol. Spectrosc. 154
(2016) 103–107.
[28] H. Chermette, J. Comput. Chem. 20 (1999) 129–154.
[29] R.G. Parr, P.K. Chattaraj, J. Am. Chem. Soc. 113 (1991) 1854–1855.
[30] R.P. Iczkowski, J.L. Margrave, J. Am. Chem. Soc. 83 (1961) 3547–3551.
[31] T. Koopmans, Physica 1 (1933) 104–113.
[32] N. Islam, D.C. Ghosh, Int. J. Quantum Chem. 109 (2011) 917–931.
[33] W. Yang, R.G. Parr, Proc. Natl. Acad. Sci. 82 (1985) 6723–6726.
[34] P.K. Chattaraj, U. Sarkar, D.R. Roy, Chem. Rev. 106 (2006) 2065–2091.
[35] R.G. Parr, L. Sventpaly, S. Liu, J. Am. Chem. Soc. 121 (1999) 1922–1924.
[36] L. Li, X. Zhang, S. Gong, H. Zhao, Y. Bai, Q. Li, L. Ji, Corros. Sci. 99 (2015) 76–88.
[37] I.B. Obot, Z.M. Gasem, Corros. Sci. 83 (2014) 359–366.
[38] K.F. Khaled, A. El-Maghraby, Arab. J. Chem. 7 (2014) 319–326.
[39] D. Frenkel, B. Smit, Understanding Molecular Simulations: from Algorithms to Appli-
cations, 2nd ed. Academic Press, San Diego, 2002.
[40] S. Kirkpatrick, C.D. Gelatt, M.P. Vecchi, Science 220 (1983) 671–680.
[41] H. Sun, J. Phys. Chem. B 102 (1998) 7338–7364.
[42] L. Guo, S. Zhu, S. Zhang, J. Ind. Eng. Chem. 24 (2015) 174–180.
[43] Y. Zhou, S. Xu, L. Guo, S. Zhang, H. Lu, Y. Gong, F. Gao, RSC Adv. 5 (2015)
14804–14813.
[44] R.G. Pearson, Acc. Chem. Res. 26 (1993) 250–255.
[45] Lieng-Huang Lee, Langmuir 12 (1996) 1681–1687.
[46] E.E. Ebenso, M.M. Kabanda, L.C. Murulana, A.K. Singh, S.K. Shukla, J. Ind. Eng. Chem.
Res. 51 (2012) 12940–12958.
[47] G.N. Lewis, J. Frankl. Inst. 226 (1938) 293–313.
[48] R.G. Pearson, J. Am. Chem. Soc. 85 (1963) 3533–3539.
[49] R.G. Pearson, J. Chem. Educ. 45 (1968) 581–587.
[50] S.H. Yoo, Y.W. Kim, J. Shin, N.K. Kim, J.S. Kim, Bull. Kor. Chem. Soc. 36 (2015)
346–355.
Table 5
Interaction and binding energies of five inhibitors adsorbed on Fe(110) surface.
Systems Ebinding (kJ mol−1
) Einteraction (kJ mol−1
)
Fe(110) + (1) 430.1 −430.1
Fe(110) + (2) 432.3 −432.3
Fe(110) + (3) 409.9 −409.9
Fe(110) + (4) 532.4 −532.4
Fe(110) + (5) 606.1 −606.1
504 S. Kaya et al. / Journal of Molecular Liquids 219 (2016) 497–504