1.5safetyobservor
•
0 likes•170 views
Communication is a key part of any successful relationship. To communicate effectively, it is important to listen actively without judgment, speak respectfully by being thoughtful with your words, and provide constructive feedback in a caring manner. The goal of effective communication is to understand others, find common ground, and solve problems together through respectful dialogue.
Report
Share
Report
Share
Recommended
3.3controlmeasures
The Queensland Government Department of Industrial Relations website provides information and services for Queensland employers and employees. It outlines workplace laws and regulations, awards and agreements, industrial relations tribunals and commissions, and health and safety in the workplace. The site aims to help all parties understand their rights and obligations.
2. Heat Transfer2
Radiation is energy that is transmitted in waves or particles. It includes electromagnetic radiation like light, X-rays, and radio waves, and particulate radiation like alpha particles, beta particles, and neutrons. Radiation can be ionizing, which carries enough energy to detach electrons from atoms or molecules and damage living tissue, or non-ionizing, which does not.
2-2
This document discusses single and three phase transformers and how to determine their equivalent circuit values. It covers the demagnetizing effect, voltage drops due to load current, and describes tests like the d.c. resistance test, open circuit test, and short circuit test which are used to find the equivalent circuit values for transformers. An example is also provided.
9 12
This document compares the luminous efficacy, or amount of visible light emitted per watt of power, of various lighting sources. Luminous flux is the highest at 225 lumens per watt for theoretical maximum white light, followed by low pressure sodium lamps at 100-140 lumens per watt and high pressure sodium lamps at 80-125 lumens per watt, with other sources like metal halide, mercury vapor, and fluorescent lamps emitting 50-100 lumens per watt, incandescents only 6-9 lumens per watt, and infrared lamps just 1.4 lumens per watt.
44.2.2manualtaskshazards
This document lists various potential workplace hazards including stress, poor ergonomics, exposure to chemicals, spider bites, fumes, and pesticides. Protecting workers from these dangers is important for health and safety. Reducing risks can help create a safer work environment.
wb6-0
Installing a Mode 3 socket requires proper safety precautions and testing procedures. The technician must first shut off power to the circuit and verify there is no voltage present. They then connect the new socket securely according to wiring diagrams and specifications before powering back on and running tests to confirm the installation functions properly.
wb3-3
This document discusses telecommunications cable installations and issues with damaged cables. It focuses on problems with cables being damaged, as this term is repeated multiple times throughout the short document without providing additional details. In just a few words, the document hints at cable installation and damage issues but does not elaborate further.
Recommended
3.3controlmeasures
The Queensland Government Department of Industrial Relations website provides information and services for Queensland employers and employees. It outlines workplace laws and regulations, awards and agreements, industrial relations tribunals and commissions, and health and safety in the workplace. The site aims to help all parties understand their rights and obligations.
2. Heat Transfer2
Radiation is energy that is transmitted in waves or particles. It includes electromagnetic radiation like light, X-rays, and radio waves, and particulate radiation like alpha particles, beta particles, and neutrons. Radiation can be ionizing, which carries enough energy to detach electrons from atoms or molecules and damage living tissue, or non-ionizing, which does not.
2-2
This document discusses single and three phase transformers and how to determine their equivalent circuit values. It covers the demagnetizing effect, voltage drops due to load current, and describes tests like the d.c. resistance test, open circuit test, and short circuit test which are used to find the equivalent circuit values for transformers. An example is also provided.
9 12
This document compares the luminous efficacy, or amount of visible light emitted per watt of power, of various lighting sources. Luminous flux is the highest at 225 lumens per watt for theoretical maximum white light, followed by low pressure sodium lamps at 100-140 lumens per watt and high pressure sodium lamps at 80-125 lumens per watt, with other sources like metal halide, mercury vapor, and fluorescent lamps emitting 50-100 lumens per watt, incandescents only 6-9 lumens per watt, and infrared lamps just 1.4 lumens per watt.
44.2.2manualtaskshazards
This document lists various potential workplace hazards including stress, poor ergonomics, exposure to chemicals, spider bites, fumes, and pesticides. Protecting workers from these dangers is important for health and safety. Reducing risks can help create a safer work environment.
wb6-0
Installing a Mode 3 socket requires proper safety precautions and testing procedures. The technician must first shut off power to the circuit and verify there is no voltage present. They then connect the new socket securely according to wiring diagrams and specifications before powering back on and running tests to confirm the installation functions properly.
wb3-3
This document discusses telecommunications cable installations and issues with damaged cables. It focuses on problems with cables being damaged, as this term is repeated multiple times throughout the short document without providing additional details. In just a few words, the document hints at cable installation and damage issues but does not elaborate further.
5-2
This document discusses safe working procedures for single and three phase transformers, potential transformers, and current transformers used for Energex metering. It provides guidance on safely working with different types of transformers.
44.2.3noise
The document contains two measurements of sound levels in decibels: 85 dB (A) which refers to a measurement on the A-weighted decibel scale, and 140 dB (lin) which refers to a linear decibel measurement without any frequency weighting applied. Both measurements indicate loud sound levels.
6. Types Of Heating3
Industrial heating is used in a variety of manufacturing processes to alter the physical, chemical, or biological properties of materials. Common industrial heating methods include furnaces, ovens, kilns, and dryers which use technologies like combustion, electricity, or electromagnetic radiation to generate heat. Proper heating equipment and process control are important for industrial heating to efficiently and effectively meet the thermal processing needs of different manufacturing sectors.
wb4-1
This document discusses the design and practices for installing telecommunications cables. It covers initial preparations for both copper and fiber optic cable installations, as well as the importance of conducting thorough site surveys to plan cable routes and identify any issues before beginning an installation project.
16 19
This document discusses optical control methods for luminaries including diffusers and luminaire design to control light distribution. Diffusers and luminaire design can be used to spread light more evenly and control how light is distributed from luminaries. The document examines how optical components and design of luminaries impacts light distribution.
1 4
Light is electromagnetic radiation that can be categorized by wavelength, with ultraviolet light having wavelengths below 400nm, the visible light spectrum ranging from 400nm to 700nm, and infrared light having wavelengths above 700nm. The visible light spectrum includes red, orange, yellow, green, blue, indigo and violet colors which are distinguished by their wavelengths and frequencies.
4. Heating Tariffs
Heating tariffs for most distributors are limited to hours between 10pm and 7am. Storage water heaters must match their storage size to their intended use. Off-peak hot water systems are usually limited to providing hot water for 17-20 hours per day.
6. Types Of Heating5
Infra-red heating uses electromagnetic waves to directly heat objects and surfaces through the transfer of kinetic energy from infrared radiation. Infra-red heating works by emitting energy in the form of infrared waves, which are absorbed by molecules in the object, causing them to vibrate more rapidly and generate heat. Infra-red heating is an efficient alternative to conventional heating methods as it heats objects directly without needing to heat the surrounding air.
wb6-2
This document discusses testing of telecommunications cables. It mentions using a multimeter or purpose-built tester to test cables. It also references using a single pair identification set or portable test telephone for testing individual cable pairs.
3-1
This document discusses insulation classes and temperature rise in transformers. It provides a table showing insulation classes A, B, F and H and their corresponding ambient temperature, rise by resistance, hot spot allowance, and maximum hottest spot temperature. The document also mentions reading a chapter on insulation classes and temperature rise in Jenneson's book, and covers transformer heat dissipation and methods of natural and forced cooling.
9-2
This document discusses applying short circuits and earths to de-energized power lines. It contains information about single and three phase transformers and extracts from electrical safety regulations regarding working on de-energized lines.
9-1
This document discusses safety procedures for working with high-voltage transformers, including following proper switching procedures, using switching sheets and access permits, taking safety precautions like isolation and warning notices, and testing high voltage lines to prove they are de-energized before working on them.
8-2
This document discusses harmonics in electrical systems. It explains that harmonics are distortions in the normal sinusoidal waveform that are integer multiples of the fundamental frequency, and can be odd or even harmonics. It focuses on third harmonics which are three times the fundamental frequency, and how magnetic saturation and hysteresis can affect the current waveform by introducing distortions from harmonic components.
8-1
The document discusses phase relations in transformers, including the general format of the sine wave and how the trigonometric functions of cosine and sine are related based on phase shifts of 90 degrees, 180 degrees, and 270 degrees. Several examples are provided to illustrate phase relations between cosine and sine.
7-1
This document discusses paralleling single and three-phase transformers to increase capacity and reliability. It covers connecting transformers in parallel in both star and delta configurations and how load is divided between the transformers when they are run in parallel. Parallel operation allows for increased capacity when demand is high and continuity of supply if one transformer fails or is taken offline.
6-2
This document discusses various types of single and three phase transformers, including star delta and delta-delta connections, name plate designations for phase shift transformers, open delta transformers, providing three-phase supply from three-phase transformers, and performing polarity tests on three-phase transformers using lamps or a voltmeter.
6-1
This document discusses different connection methods for single-phase and three-phase transformers, including connecting single-phase transformers, phase shifts in three-phase connections, and the star-star, delta-star, and delta connections used for three-phase transformers.
5-1
This document discusses different types of transformers used in electrical systems, including single and three phase transformers, potential transformers (PT or VT) that step down high voltages for measurement, current transformers that reduce high currents for measurement, and how potential (PT) and current (VT) transformers connect to instruments.
4-2
The document outlines temperature settings and signals for cooling devices like oil pumps and fans on single and three phase transformers. It provides temperature thresholds for when cooling devices turn on and off, when alarm and trip signals activate based on oil and winding temperature, and discusses different types of transformer tappings including off-circuit and on-load tap changing.
4-1
This document discusses transformer auxiliary equipment, including the conservator, breather, explosion vent, pressure relief device, Buchholtz relay, and temperature indicators. These components help monitor and regulate things like pressure, temperature, gas accumulation, and moisture levels within the transformer to protect it from damage.
3-2
This document discusses different types of transformers used in single and three phase systems, including dry type transformers and Abb resibloc transformers. It also covers different cooling methods for transformers like transformer oil cooling, and discusses the properties, testing, and replacement of transformer oil. Synthetic liquid cooling is also mentioned.
More Related Content
Viewers also liked
5-2
This document discusses safe working procedures for single and three phase transformers, potential transformers, and current transformers used for Energex metering. It provides guidance on safely working with different types of transformers.
44.2.3noise
The document contains two measurements of sound levels in decibels: 85 dB (A) which refers to a measurement on the A-weighted decibel scale, and 140 dB (lin) which refers to a linear decibel measurement without any frequency weighting applied. Both measurements indicate loud sound levels.
6. Types Of Heating3
Industrial heating is used in a variety of manufacturing processes to alter the physical, chemical, or biological properties of materials. Common industrial heating methods include furnaces, ovens, kilns, and dryers which use technologies like combustion, electricity, or electromagnetic radiation to generate heat. Proper heating equipment and process control are important for industrial heating to efficiently and effectively meet the thermal processing needs of different manufacturing sectors.
wb4-1
This document discusses the design and practices for installing telecommunications cables. It covers initial preparations for both copper and fiber optic cable installations, as well as the importance of conducting thorough site surveys to plan cable routes and identify any issues before beginning an installation project.
16 19
This document discusses optical control methods for luminaries including diffusers and luminaire design to control light distribution. Diffusers and luminaire design can be used to spread light more evenly and control how light is distributed from luminaries. The document examines how optical components and design of luminaries impacts light distribution.
1 4
Light is electromagnetic radiation that can be categorized by wavelength, with ultraviolet light having wavelengths below 400nm, the visible light spectrum ranging from 400nm to 700nm, and infrared light having wavelengths above 700nm. The visible light spectrum includes red, orange, yellow, green, blue, indigo and violet colors which are distinguished by their wavelengths and frequencies.
4. Heating Tariffs
Heating tariffs for most distributors are limited to hours between 10pm and 7am. Storage water heaters must match their storage size to their intended use. Off-peak hot water systems are usually limited to providing hot water for 17-20 hours per day.
6. Types Of Heating5
Infra-red heating uses electromagnetic waves to directly heat objects and surfaces through the transfer of kinetic energy from infrared radiation. Infra-red heating works by emitting energy in the form of infrared waves, which are absorbed by molecules in the object, causing them to vibrate more rapidly and generate heat. Infra-red heating is an efficient alternative to conventional heating methods as it heats objects directly without needing to heat the surrounding air.
wb6-2
This document discusses testing of telecommunications cables. It mentions using a multimeter or purpose-built tester to test cables. It also references using a single pair identification set or portable test telephone for testing individual cable pairs.
3-1
This document discusses insulation classes and temperature rise in transformers. It provides a table showing insulation classes A, B, F and H and their corresponding ambient temperature, rise by resistance, hot spot allowance, and maximum hottest spot temperature. The document also mentions reading a chapter on insulation classes and temperature rise in Jenneson's book, and covers transformer heat dissipation and methods of natural and forced cooling.
Viewers also liked (11)
More from eLearning Australia
9-2
This document discusses applying short circuits and earths to de-energized power lines. It contains information about single and three phase transformers and extracts from electrical safety regulations regarding working on de-energized lines.
9-1
This document discusses safety procedures for working with high-voltage transformers, including following proper switching procedures, using switching sheets and access permits, taking safety precautions like isolation and warning notices, and testing high voltage lines to prove they are de-energized before working on them.
8-2
This document discusses harmonics in electrical systems. It explains that harmonics are distortions in the normal sinusoidal waveform that are integer multiples of the fundamental frequency, and can be odd or even harmonics. It focuses on third harmonics which are three times the fundamental frequency, and how magnetic saturation and hysteresis can affect the current waveform by introducing distortions from harmonic components.
8-1
The document discusses phase relations in transformers, including the general format of the sine wave and how the trigonometric functions of cosine and sine are related based on phase shifts of 90 degrees, 180 degrees, and 270 degrees. Several examples are provided to illustrate phase relations between cosine and sine.
7-1
This document discusses paralleling single and three-phase transformers to increase capacity and reliability. It covers connecting transformers in parallel in both star and delta configurations and how load is divided between the transformers when they are run in parallel. Parallel operation allows for increased capacity when demand is high and continuity of supply if one transformer fails or is taken offline.
6-2
This document discusses various types of single and three phase transformers, including star delta and delta-delta connections, name plate designations for phase shift transformers, open delta transformers, providing three-phase supply from three-phase transformers, and performing polarity tests on three-phase transformers using lamps or a voltmeter.
6-1
This document discusses different connection methods for single-phase and three-phase transformers, including connecting single-phase transformers, phase shifts in three-phase connections, and the star-star, delta-star, and delta connections used for three-phase transformers.
5-1
This document discusses different types of transformers used in electrical systems, including single and three phase transformers, potential transformers (PT or VT) that step down high voltages for measurement, current transformers that reduce high currents for measurement, and how potential (PT) and current (VT) transformers connect to instruments.
4-2
The document outlines temperature settings and signals for cooling devices like oil pumps and fans on single and three phase transformers. It provides temperature thresholds for when cooling devices turn on and off, when alarm and trip signals activate based on oil and winding temperature, and discusses different types of transformer tappings including off-circuit and on-load tap changing.
4-1
This document discusses transformer auxiliary equipment, including the conservator, breather, explosion vent, pressure relief device, Buchholtz relay, and temperature indicators. These components help monitor and regulate things like pressure, temperature, gas accumulation, and moisture levels within the transformer to protect it from damage.
3-2
This document discusses different types of transformers used in single and three phase systems, including dry type transformers and Abb resibloc transformers. It also covers different cooling methods for transformers like transformer oil cooling, and discusses the properties, testing, and replacement of transformer oil. Synthetic liquid cooling is also mentioned.
2-3
This document discusses calculating voltage regulation from short circuit tests, determining prospective fault current for single and three phase transformers, and all day efficiency of transformers. It provides information on testing and evaluating the performance of single and three phase transformer systems.
2-1
This document discusses the equivalent circuit of single and three phase transformers, including transformer losses from magnetic flux and core losses. It also covers the effect that different loads have on the secondary winding of a transformer.
1-1
This document provides an overview of key topics related to single and three phase transformers, including their construction and operation, the EMF equation, voltage and turns ratios, power equations, and significance of nameplate data items. Learners are directed to read specific chapters in a Jenneson textbook to learn more about transformers, transformer equations, and how to interpret nameplate information.
51 53
Proper maintenance and inspection is required to ensure emergency lighting systems function properly in the event of a power outage. Fire alarm systems must meet certain principles, terms and requirements to effectively detect fires and notify occupants. Radioactive smoke alarms that are no longer functional must be disposed of following applicable regulations due to their hazardous materials.
47 50
Security lighting uses infrared scanning to detect movement and activate lights, while emergency evacuation lighting provides illumination in case of emergency exits. There are different types of emergency lighting systems that can provide illumination for evacuating a building when there is no main power.
45 46
This document provides instructions for calculating the lighting requirements for flood lighting an area. It explains that the total lumens required can be calculated by multiplying the area in square meters by the desired lux level. It then states that the number of lamps needed is equal to the total lumens divided by the lumen output of the selected lamp type.
41 44
This document discusses neon lighting and provides information on electromagnetic compatibility, Queensland energy efficient lighting requirements, and the installation and maintenance of neon lights. It covers regulations for neon signs as well as guidelines for setting up and servicing neon lighting systems in order to ensure compliance with standards.
37 40
Metal halide lamps, high pressure sodium lamps, low pressure sodium lamps, and LEDs are the main types of lighting used today. Metal halide and high pressure sodium lamps are high-intensity discharge lamps commonly used in industrial and outdoor lighting. LEDs are solid-state lamps that have become a popular replacement for other types of lamps due to their energy efficiency and long lifetime.
33 36
Fluorescent light circuits and HID (High Density Discharge Lighting) were discussed along with mercury vapour lamps (MV) which come in self-ballasted types that can be blended or color corrected.
Recently uploaded
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcLAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneHow to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Recently uploaded (20)
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
1.5safetyobservor
- 5. 000