44.2.2manualtaskshazards
•
0 likes•204 views
This document lists various potential workplace hazards including stress, poor ergonomics, exposure to chemicals, spider bites, fumes, and pesticides. Protecting workers from these dangers is important for health and safety. Reducing risks can help create a safer work environment.
Report
Share
Report
Share
Recommended
wb4-1
This document discusses the design and practices for installing telecommunications cables. It covers initial preparations for both copper and fiber optic cable installations, as well as the importance of conducting thorough site surveys to plan cable routes and identify any issues before beginning an installation project.
Telecommunication survey 2010
Cellular mobile phone service is the wireless telecommunication service that is operated via mobile phone or cellular phone (an electronic telecommunication device).
Cellular mobile services in Pakistan commenced in 90’s when two cellular mobile telephone licenses were awarded to Paktel and PakCom (Instaphone) for provision of cellular mobile telephony in Pakistan.
With the passage of time telecom sector in Pakistan has grown rapidly and currently there are 5 mobile phone operators;
Mobilink, Ufone, Telenor, Zong and Warid telecom.
Sem 2 bs1 telecommunication r1
Telecommunication involves the transmission of messages over distances for communication purposes. Historically, visual signals like smoke signals were used, but modern telecommunication relies on electrical signals transmitted via cables, radio waves or other media. All telecommunication systems have four basic components - a sender that creates a signal from information, a transmission medium that carries the signal, a receiver that converts the signal back into usable information, and a communication channel connecting sender and receiver. Examples of telecommunication tools include the telegraph, telephone, radio, television and computer networks. Communication can be transmitted via analog signals like voice or digital signals like computer data. Key developments in Malaysia's telecommunication history include the first telegraph cable in 1870, telephone exchanges in the 1890s
CDMA
CDMA allows multiple users to share the same channel by assigning each user a unique code. It spreads the user's data signal over a wider bandwidth through multiplication with a pseudo-random code. This allows different signals to be separated at the receiver through correlation with the corresponding code. Major technologies using CDMA include WiFi, Bluetooth, and GPS, which employ techniques like DSSS, FHSS, and long/short codes. Performance of 802.11 networks can be analyzed based on collision probability and throughput calculations under saturated traffic conditions. Later developments expanded CDMA capabilities with techniques like W-CDMA, TD-CDMA, and TD-SCDMA.
01 principles of the wcdma system
The document discusses the principles and technical features of WCDMA, including an overview of CDMA technology, how it uses spreading codes to allow multiple users to transmit over the same frequency band simultaneously, and its use of techniques like channel coding, interleaving, and rake receivers to improve performance in multipath environments.
9-2
This document discusses applying short circuits and earths to de-energized power lines. It contains information about single and three phase transformers and extracts from electrical safety regulations regarding working on de-energized lines.
9-1
This document discusses safety procedures for working with high-voltage transformers, including following proper switching procedures, using switching sheets and access permits, taking safety precautions like isolation and warning notices, and testing high voltage lines to prove they are de-energized before working on them.
8-2
This document discusses harmonics in electrical systems. It explains that harmonics are distortions in the normal sinusoidal waveform that are integer multiples of the fundamental frequency, and can be odd or even harmonics. It focuses on third harmonics which are three times the fundamental frequency, and how magnetic saturation and hysteresis can affect the current waveform by introducing distortions from harmonic components.
Recommended
wb4-1
This document discusses the design and practices for installing telecommunications cables. It covers initial preparations for both copper and fiber optic cable installations, as well as the importance of conducting thorough site surveys to plan cable routes and identify any issues before beginning an installation project.
Telecommunication survey 2010
Cellular mobile phone service is the wireless telecommunication service that is operated via mobile phone or cellular phone (an electronic telecommunication device).
Cellular mobile services in Pakistan commenced in 90’s when two cellular mobile telephone licenses were awarded to Paktel and PakCom (Instaphone) for provision of cellular mobile telephony in Pakistan.
With the passage of time telecom sector in Pakistan has grown rapidly and currently there are 5 mobile phone operators;
Mobilink, Ufone, Telenor, Zong and Warid telecom.
Sem 2 bs1 telecommunication r1
Telecommunication involves the transmission of messages over distances for communication purposes. Historically, visual signals like smoke signals were used, but modern telecommunication relies on electrical signals transmitted via cables, radio waves or other media. All telecommunication systems have four basic components - a sender that creates a signal from information, a transmission medium that carries the signal, a receiver that converts the signal back into usable information, and a communication channel connecting sender and receiver. Examples of telecommunication tools include the telegraph, telephone, radio, television and computer networks. Communication can be transmitted via analog signals like voice or digital signals like computer data. Key developments in Malaysia's telecommunication history include the first telegraph cable in 1870, telephone exchanges in the 1890s
CDMA
CDMA allows multiple users to share the same channel by assigning each user a unique code. It spreads the user's data signal over a wider bandwidth through multiplication with a pseudo-random code. This allows different signals to be separated at the receiver through correlation with the corresponding code. Major technologies using CDMA include WiFi, Bluetooth, and GPS, which employ techniques like DSSS, FHSS, and long/short codes. Performance of 802.11 networks can be analyzed based on collision probability and throughput calculations under saturated traffic conditions. Later developments expanded CDMA capabilities with techniques like W-CDMA, TD-CDMA, and TD-SCDMA.
01 principles of the wcdma system
The document discusses the principles and technical features of WCDMA, including an overview of CDMA technology, how it uses spreading codes to allow multiple users to transmit over the same frequency band simultaneously, and its use of techniques like channel coding, interleaving, and rake receivers to improve performance in multipath environments.
9-2
This document discusses applying short circuits and earths to de-energized power lines. It contains information about single and three phase transformers and extracts from electrical safety regulations regarding working on de-energized lines.
9-1
This document discusses safety procedures for working with high-voltage transformers, including following proper switching procedures, using switching sheets and access permits, taking safety precautions like isolation and warning notices, and testing high voltage lines to prove they are de-energized before working on them.
8-2
This document discusses harmonics in electrical systems. It explains that harmonics are distortions in the normal sinusoidal waveform that are integer multiples of the fundamental frequency, and can be odd or even harmonics. It focuses on third harmonics which are three times the fundamental frequency, and how magnetic saturation and hysteresis can affect the current waveform by introducing distortions from harmonic components.
8-1
The document discusses phase relations in transformers, including the general format of the sine wave and how the trigonometric functions of cosine and sine are related based on phase shifts of 90 degrees, 180 degrees, and 270 degrees. Several examples are provided to illustrate phase relations between cosine and sine.
7-1
This document discusses paralleling single and three-phase transformers to increase capacity and reliability. It covers connecting transformers in parallel in both star and delta configurations and how load is divided between the transformers when they are run in parallel. Parallel operation allows for increased capacity when demand is high and continuity of supply if one transformer fails or is taken offline.
6-2
This document discusses various types of single and three phase transformers, including star delta and delta-delta connections, name plate designations for phase shift transformers, open delta transformers, providing three-phase supply from three-phase transformers, and performing polarity tests on three-phase transformers using lamps or a voltmeter.
6-1
This document discusses different connection methods for single-phase and three-phase transformers, including connecting single-phase transformers, phase shifts in three-phase connections, and the star-star, delta-star, and delta connections used for three-phase transformers.
5-2
This document discusses safe working procedures for single and three phase transformers, potential transformers, and current transformers used for Energex metering. It provides guidance on safely working with different types of transformers.
5-1
This document discusses different types of transformers used in electrical systems, including single and three phase transformers, potential transformers (PT or VT) that step down high voltages for measurement, current transformers that reduce high currents for measurement, and how potential (PT) and current (VT) transformers connect to instruments.
4-2
The document outlines temperature settings and signals for cooling devices like oil pumps and fans on single and three phase transformers. It provides temperature thresholds for when cooling devices turn on and off, when alarm and trip signals activate based on oil and winding temperature, and discusses different types of transformer tappings including off-circuit and on-load tap changing.
4-1
This document discusses transformer auxiliary equipment, including the conservator, breather, explosion vent, pressure relief device, Buchholtz relay, and temperature indicators. These components help monitor and regulate things like pressure, temperature, gas accumulation, and moisture levels within the transformer to protect it from damage.
3-2
This document discusses different types of transformers used in single and three phase systems, including dry type transformers and Abb resibloc transformers. It also covers different cooling methods for transformers like transformer oil cooling, and discusses the properties, testing, and replacement of transformer oil. Synthetic liquid cooling is also mentioned.
3-1
This document discusses insulation classes and temperature rise in transformers. It provides a table showing insulation classes A, B, F and H and their corresponding ambient temperature, rise by resistance, hot spot allowance, and maximum hottest spot temperature. The document also mentions reading a chapter on insulation classes and temperature rise in Jenneson's book, and covers transformer heat dissipation and methods of natural and forced cooling.
2-3
This document discusses calculating voltage regulation from short circuit tests, determining prospective fault current for single and three phase transformers, and all day efficiency of transformers. It provides information on testing and evaluating the performance of single and three phase transformer systems.
2-2
This document discusses single and three phase transformers and how to determine their equivalent circuit values. It covers the demagnetizing effect, voltage drops due to load current, and describes tests like the d.c. resistance test, open circuit test, and short circuit test which are used to find the equivalent circuit values for transformers. An example is also provided.
2-1
This document discusses the equivalent circuit of single and three phase transformers, including transformer losses from magnetic flux and core losses. It also covers the effect that different loads have on the secondary winding of a transformer.
1-1
This document provides an overview of key topics related to single and three phase transformers, including their construction and operation, the EMF equation, voltage and turns ratios, power equations, and significance of nameplate data items. Learners are directed to read specific chapters in a Jenneson textbook to learn more about transformers, transformer equations, and how to interpret nameplate information.
51 53
Proper maintenance and inspection is required to ensure emergency lighting systems function properly in the event of a power outage. Fire alarm systems must meet certain principles, terms and requirements to effectively detect fires and notify occupants. Radioactive smoke alarms that are no longer functional must be disposed of following applicable regulations due to their hazardous materials.
47 50
Security lighting uses infrared scanning to detect movement and activate lights, while emergency evacuation lighting provides illumination in case of emergency exits. There are different types of emergency lighting systems that can provide illumination for evacuating a building when there is no main power.
45 46
This document provides instructions for calculating the lighting requirements for flood lighting an area. It explains that the total lumens required can be calculated by multiplying the area in square meters by the desired lux level. It then states that the number of lamps needed is equal to the total lumens divided by the lumen output of the selected lamp type.
41 44
This document discusses neon lighting and provides information on electromagnetic compatibility, Queensland energy efficient lighting requirements, and the installation and maintenance of neon lights. It covers regulations for neon signs as well as guidelines for setting up and servicing neon lighting systems in order to ensure compliance with standards.
37 40
Metal halide lamps, high pressure sodium lamps, low pressure sodium lamps, and LEDs are the main types of lighting used today. Metal halide and high pressure sodium lamps are high-intensity discharge lamps commonly used in industrial and outdoor lighting. LEDs are solid-state lamps that have become a popular replacement for other types of lamps due to their energy efficiency and long lifetime.
33 36
Fluorescent light circuits and HID (High Density Discharge Lighting) were discussed along with mercury vapour lamps (MV) which come in self-ballasted types that can be blended or color corrected.
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
More Related Content
More from eLearning Australia
8-1
The document discusses phase relations in transformers, including the general format of the sine wave and how the trigonometric functions of cosine and sine are related based on phase shifts of 90 degrees, 180 degrees, and 270 degrees. Several examples are provided to illustrate phase relations between cosine and sine.
7-1
This document discusses paralleling single and three-phase transformers to increase capacity and reliability. It covers connecting transformers in parallel in both star and delta configurations and how load is divided between the transformers when they are run in parallel. Parallel operation allows for increased capacity when demand is high and continuity of supply if one transformer fails or is taken offline.
6-2
This document discusses various types of single and three phase transformers, including star delta and delta-delta connections, name plate designations for phase shift transformers, open delta transformers, providing three-phase supply from three-phase transformers, and performing polarity tests on three-phase transformers using lamps or a voltmeter.
6-1
This document discusses different connection methods for single-phase and three-phase transformers, including connecting single-phase transformers, phase shifts in three-phase connections, and the star-star, delta-star, and delta connections used for three-phase transformers.
5-2
This document discusses safe working procedures for single and three phase transformers, potential transformers, and current transformers used for Energex metering. It provides guidance on safely working with different types of transformers.
5-1
This document discusses different types of transformers used in electrical systems, including single and three phase transformers, potential transformers (PT or VT) that step down high voltages for measurement, current transformers that reduce high currents for measurement, and how potential (PT) and current (VT) transformers connect to instruments.
4-2
The document outlines temperature settings and signals for cooling devices like oil pumps and fans on single and three phase transformers. It provides temperature thresholds for when cooling devices turn on and off, when alarm and trip signals activate based on oil and winding temperature, and discusses different types of transformer tappings including off-circuit and on-load tap changing.
4-1
This document discusses transformer auxiliary equipment, including the conservator, breather, explosion vent, pressure relief device, Buchholtz relay, and temperature indicators. These components help monitor and regulate things like pressure, temperature, gas accumulation, and moisture levels within the transformer to protect it from damage.
3-2
This document discusses different types of transformers used in single and three phase systems, including dry type transformers and Abb resibloc transformers. It also covers different cooling methods for transformers like transformer oil cooling, and discusses the properties, testing, and replacement of transformer oil. Synthetic liquid cooling is also mentioned.
3-1
This document discusses insulation classes and temperature rise in transformers. It provides a table showing insulation classes A, B, F and H and their corresponding ambient temperature, rise by resistance, hot spot allowance, and maximum hottest spot temperature. The document also mentions reading a chapter on insulation classes and temperature rise in Jenneson's book, and covers transformer heat dissipation and methods of natural and forced cooling.
2-3
This document discusses calculating voltage regulation from short circuit tests, determining prospective fault current for single and three phase transformers, and all day efficiency of transformers. It provides information on testing and evaluating the performance of single and three phase transformer systems.
2-2
This document discusses single and three phase transformers and how to determine their equivalent circuit values. It covers the demagnetizing effect, voltage drops due to load current, and describes tests like the d.c. resistance test, open circuit test, and short circuit test which are used to find the equivalent circuit values for transformers. An example is also provided.
2-1
This document discusses the equivalent circuit of single and three phase transformers, including transformer losses from magnetic flux and core losses. It also covers the effect that different loads have on the secondary winding of a transformer.
1-1
This document provides an overview of key topics related to single and three phase transformers, including their construction and operation, the EMF equation, voltage and turns ratios, power equations, and significance of nameplate data items. Learners are directed to read specific chapters in a Jenneson textbook to learn more about transformers, transformer equations, and how to interpret nameplate information.
51 53
Proper maintenance and inspection is required to ensure emergency lighting systems function properly in the event of a power outage. Fire alarm systems must meet certain principles, terms and requirements to effectively detect fires and notify occupants. Radioactive smoke alarms that are no longer functional must be disposed of following applicable regulations due to their hazardous materials.
47 50
Security lighting uses infrared scanning to detect movement and activate lights, while emergency evacuation lighting provides illumination in case of emergency exits. There are different types of emergency lighting systems that can provide illumination for evacuating a building when there is no main power.
45 46
This document provides instructions for calculating the lighting requirements for flood lighting an area. It explains that the total lumens required can be calculated by multiplying the area in square meters by the desired lux level. It then states that the number of lamps needed is equal to the total lumens divided by the lumen output of the selected lamp type.
41 44
This document discusses neon lighting and provides information on electromagnetic compatibility, Queensland energy efficient lighting requirements, and the installation and maintenance of neon lights. It covers regulations for neon signs as well as guidelines for setting up and servicing neon lighting systems in order to ensure compliance with standards.
37 40
Metal halide lamps, high pressure sodium lamps, low pressure sodium lamps, and LEDs are the main types of lighting used today. Metal halide and high pressure sodium lamps are high-intensity discharge lamps commonly used in industrial and outdoor lighting. LEDs are solid-state lamps that have become a popular replacement for other types of lamps due to their energy efficiency and long lifetime.
33 36
Fluorescent light circuits and HID (High Density Discharge Lighting) were discussed along with mercury vapour lamps (MV) which come in self-ballasted types that can be blended or color corrected.
Recently uploaded
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaHow to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Recently uploaded (20)
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
44.2.2manualtaskshazards
- 1. Body Stress
- 2. Ergonomics
- 3. Chemicals
- 4. Spider Bites
- 5. Fumes
- 6. Pesticides