T&A Survey is een bodemonderzoeksbedrijf gespecialiseerd in geofysisch, explosieven, milieukundig en archeologisch bodem- en waterbodemonderzoek, drone services en ondergrondse energie.
Drones are a different kind of new technology from what we’re used to. They offer something else: the conquest of physical space, the extension of society’s compass, the ability to be anywhere and see anything.
For the past few years, one of the most exciting class of gadgets on display has been drones. They got cheaper, lighter, and easier to use even as they became more powerful.
We believe 2015 is an important year for drones as they will change how brands interact with consumers in both advertising and events, and here's everything you need to know about the drone technology.
Revit Modeling India is a precursor in the application of the BIM software, methods and processes in the building engineering and construction sectors holding on to current project BIM requirements. Our experience with outsourcing has enabled us to understand the requirements of international customers and constantly provide reliable engineering services for a wide spectrum of industries. Revit Modeling India offers complete solutions for BIM technology from 3D modeling in Revit, 4D-enabling the manipulation of models through time, 5D-incorporating cost data, nD-extrapolating energy utilization and sustainability performance.
An unmanned aerial vehicle (UAV), commonly known as a Drone, is an aircraft without a human pilot on board. UAVs can be remote controlled aircraft (e.g. flown by a pilot at a ground control station) or can fly autonomously based on pre-programmed flight plans or more complex dynamic automation systems
A UAV is defined as being capable of controlled, sustained level flight and powered by a jet or reciprocating engine. In addition, a cruise missile can be considered to be a UAV, but is treated separately on the basis that the vehicle is the weapon.
Unmanned Aerial Vehicles (UAVs) are aircrafts that fly without any humans being onboard. They are either remotely piloted, or piloted by an onboard computer. This kind of aircrafts can be used in different military missions such as surveillance, reconnaissance, battle damage assessment, communications relay, minesweeping, hazardous substances detection and radar jamming. However they can be used in other than military missions like detection of hazardous objects on train rails and investigation of infected areas. Aircrafts that are able of hovering and vertical flying can also be used for indoor missions like counter terrorist operations
To download this ppt click on this link
https://adf.ly/PdL4V
The presentation covers following areas:
- Typical Problems in Construction Industry
- What is BIM?
-BIM Process
- Influence of BIM on Industry Problems
- BIM Application
- BIM Advantages
- BIM Workflow
- BIM & Project Management
- BIM & Design Team Members
- BIM around the Globe
- Construction Industry with BIM
All work presented in the presentation is carried out by graduates of NUST, Islambad including Abdul Mughees Khan, Syed Kashif Ali Shah, Sharjeel Ahmad Tariq, Malik Awais Ahmad and Hamza Khan Shinwari.
Special credit of the work goes to Engr Tahir Shamshad, Vice President NESPAK and Engr Zia Ud Din, Asst Professor NUST under guidance and mentor ship the whole work was performed.
For more details feel free to contact: amugheeskhan@gmail.com
T&A Survey is een bodemonderzoeksbedrijf gespecialiseerd in geofysisch, explosieven, milieukundig en archeologisch bodem- en waterbodemonderzoek, drone services en ondergrondse energie.
Drones are a different kind of new technology from what we’re used to. They offer something else: the conquest of physical space, the extension of society’s compass, the ability to be anywhere and see anything.
For the past few years, one of the most exciting class of gadgets on display has been drones. They got cheaper, lighter, and easier to use even as they became more powerful.
We believe 2015 is an important year for drones as they will change how brands interact with consumers in both advertising and events, and here's everything you need to know about the drone technology.
Revit Modeling India is a precursor in the application of the BIM software, methods and processes in the building engineering and construction sectors holding on to current project BIM requirements. Our experience with outsourcing has enabled us to understand the requirements of international customers and constantly provide reliable engineering services for a wide spectrum of industries. Revit Modeling India offers complete solutions for BIM technology from 3D modeling in Revit, 4D-enabling the manipulation of models through time, 5D-incorporating cost data, nD-extrapolating energy utilization and sustainability performance.
An unmanned aerial vehicle (UAV), commonly known as a Drone, is an aircraft without a human pilot on board. UAVs can be remote controlled aircraft (e.g. flown by a pilot at a ground control station) or can fly autonomously based on pre-programmed flight plans or more complex dynamic automation systems
A UAV is defined as being capable of controlled, sustained level flight and powered by a jet or reciprocating engine. In addition, a cruise missile can be considered to be a UAV, but is treated separately on the basis that the vehicle is the weapon.
Unmanned Aerial Vehicles (UAVs) are aircrafts that fly without any humans being onboard. They are either remotely piloted, or piloted by an onboard computer. This kind of aircrafts can be used in different military missions such as surveillance, reconnaissance, battle damage assessment, communications relay, minesweeping, hazardous substances detection and radar jamming. However they can be used in other than military missions like detection of hazardous objects on train rails and investigation of infected areas. Aircrafts that are able of hovering and vertical flying can also be used for indoor missions like counter terrorist operations
To download this ppt click on this link
https://adf.ly/PdL4V
The presentation covers following areas:
- Typical Problems in Construction Industry
- What is BIM?
-BIM Process
- Influence of BIM on Industry Problems
- BIM Application
- BIM Advantages
- BIM Workflow
- BIM & Project Management
- BIM & Design Team Members
- BIM around the Globe
- Construction Industry with BIM
All work presented in the presentation is carried out by graduates of NUST, Islambad including Abdul Mughees Khan, Syed Kashif Ali Shah, Sharjeel Ahmad Tariq, Malik Awais Ahmad and Hamza Khan Shinwari.
Special credit of the work goes to Engr Tahir Shamshad, Vice President NESPAK and Engr Zia Ud Din, Asst Professor NUST under guidance and mentor ship the whole work was performed.
For more details feel free to contact: amugheeskhan@gmail.com
11. www.euka.org
WerfOntwerp-FaseAnalyse
Drones in Construction Industry
Visualisatie: Arcadis
Probleem: (voor)ontwerp op orthofotos
• Beschikbare luchtfoto’s = gedateerd
• Luchtbeelden op maat
=> €10.000 (Helikopter + Wescam)
=> Geen flexibiliteit