1451256LT
•
0 likes•20 views
This document contains a student's academic record including the courses taken in the 2016/2017 semester 1, the grades and credits earned for each course, the student's semester and cumulative GPA, and an explanation of the institution's grading system. The student, Shaun Lee Kai Wen with admission number 1451256, earned an A grade in one course and B grades in two other courses during the semester. Their semester GPA was 3.667 and cumulative GPA was 3.665. The grading system defines the letter grades, grade points, and their meaning.
Report
Share
Report
Share
Download to read offline
Recommended
Project Paper (Maint Strategy) - Idzuari Azli G03178
This document discusses maintenance strategies and selecting an optimal strategy. It begins with an introduction to maintenance strategies and their importance. It then reviews previous research on selecting maintenance strategies and compares different strategy alternatives. Key criteria for selection are identified, such as safety, cost and customer satisfaction. Decision making tools can help maintenance managers analyze factors and select the best strategy. The document concludes that using these tools simplifies the problem of selecting an optimal maintenance strategy.
Project report
This document presents a partial project report on developing an Examination Automation System. The system was developed by 4 students - Esha Mehrotra, Sarthak Ghosh, Sayan Mukherjee, and Souvik Banerjee under the supervision of Mr. Suprativ Saha at Adamas Institute of Technology to fulfill their Bachelor's degree requirements. The report includes an introduction to the system's objectives, a feasibility study, UML diagrams, discussion of future enhancements, and conclusions. The automation system aims to streamline examination management tasks like student and teacher data management, seating allocation, routine scheduling, and result processing.
Bf34357368
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Java documentaion template(mini)
This document is a project report for an online missing vehicles tracking application for a police department. It describes developing a centralized SMS-based application that allows police to query vehicle details by chassis number when a vehicle is recovered, to identify the owner and original police complaint. The application can also be used by the public to check if a second-hand vehicle was stolen and to report unattended suspicious vehicles. The report includes an introduction, system analysis outlining the existing system problems and proposed new system, feasibility analysis, system requirements, selected development tools, system design documentation, and planned testing.
Resume
This document is a resume for Chethan Chandrababu Acharya. It summarizes his work experience, technical skills, education, training, projects and honors. His most relevant work experience was as a Senior Design Engineer and Team Lead at Larsen & Toubro Limited in Bangalore, India where he led a team that reduced unaccounted for water losses in a water distribution system from 52% to 14%. He is currently a candidate for a Master's in Mechanical Engineering at Rutgers University with a GPA of 3.5/4.0 and received his Bachelor's in Mechanical Engineering from Visvesvaraya Technological University in Bangalore, India with a GPA of 8.9/10.0
Assignment booklet 2019 dit 3 years (3rd year)
This document provides information and instructions for 3rd year Diploma in Information Technology students regarding their academic assignments for the 2019 academic year. It outlines the modules and due dates for compulsory and elective module assignments. Guidelines for completing the assignments are also provided, including formatting requirements and referencing standards. Sample assignment questions are included for the modules IT Project Management, Software Engineering, and Quantitative Techniques. The document is 21 pages and appears to be from the assignment booklet distributed to students at the beginning of the academic year.
SJSoM Pratiman Case Study Competition 2013
Computech Technologies should launch CBA & CFM or CPBA & CFM first to maximize profit and minimize risk. These combinations require the fewest number of students (around 23) to break even based on their costs. CBA & CFM is preferred because it requires around 3 students per course, which is a safe assumption for the untested brand.
A logistic regression model was created using 341 data points to predict enrollment in 3-month courses. The model found that only age was a significant predictor, with older customers less likely to enroll. The optimal model has a constant of 5.622 and an age coefficient of -0.133. This indicates the target profile for these short courses should be younger consumers.
Engineering economics and life cycle cost analysis
Abstract Life-cycle cost analysis (LCCA) is anevaluating tool to valuate the total financial/resource requirements for total ownership of a
building. LCCA is effective when project options that fulfill the same task demands, having different initial costs and operational
costs, needs to be examined in order to undertake the option that optimizes financial requirements.
Building-related expenses can be furthercategorized into the following:
Initial Costs
Operation, Maintenance, and Repair Costs
Replacement Costs
Residual Values
Finance Charges
Non-Monetary Costs
This article mainly focuses on the Maintenance and Repair cost analysis; giving probable trends for next 25 years for various
elements using DSR, WPI and CPI. These trends are only applicable for the whole of Mumbai.
Keyordsw: Life Cycle Cost, Maintenance and Repair cost.
Recommended
Project Paper (Maint Strategy) - Idzuari Azli G03178
This document discusses maintenance strategies and selecting an optimal strategy. It begins with an introduction to maintenance strategies and their importance. It then reviews previous research on selecting maintenance strategies and compares different strategy alternatives. Key criteria for selection are identified, such as safety, cost and customer satisfaction. Decision making tools can help maintenance managers analyze factors and select the best strategy. The document concludes that using these tools simplifies the problem of selecting an optimal maintenance strategy.
Project report
This document presents a partial project report on developing an Examination Automation System. The system was developed by 4 students - Esha Mehrotra, Sarthak Ghosh, Sayan Mukherjee, and Souvik Banerjee under the supervision of Mr. Suprativ Saha at Adamas Institute of Technology to fulfill their Bachelor's degree requirements. The report includes an introduction to the system's objectives, a feasibility study, UML diagrams, discussion of future enhancements, and conclusions. The automation system aims to streamline examination management tasks like student and teacher data management, seating allocation, routine scheduling, and result processing.
Bf34357368
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Java documentaion template(mini)
This document is a project report for an online missing vehicles tracking application for a police department. It describes developing a centralized SMS-based application that allows police to query vehicle details by chassis number when a vehicle is recovered, to identify the owner and original police complaint. The application can also be used by the public to check if a second-hand vehicle was stolen and to report unattended suspicious vehicles. The report includes an introduction, system analysis outlining the existing system problems and proposed new system, feasibility analysis, system requirements, selected development tools, system design documentation, and planned testing.
Resume
This document is a resume for Chethan Chandrababu Acharya. It summarizes his work experience, technical skills, education, training, projects and honors. His most relevant work experience was as a Senior Design Engineer and Team Lead at Larsen & Toubro Limited in Bangalore, India where he led a team that reduced unaccounted for water losses in a water distribution system from 52% to 14%. He is currently a candidate for a Master's in Mechanical Engineering at Rutgers University with a GPA of 3.5/4.0 and received his Bachelor's in Mechanical Engineering from Visvesvaraya Technological University in Bangalore, India with a GPA of 8.9/10.0
Assignment booklet 2019 dit 3 years (3rd year)
This document provides information and instructions for 3rd year Diploma in Information Technology students regarding their academic assignments for the 2019 academic year. It outlines the modules and due dates for compulsory and elective module assignments. Guidelines for completing the assignments are also provided, including formatting requirements and referencing standards. Sample assignment questions are included for the modules IT Project Management, Software Engineering, and Quantitative Techniques. The document is 21 pages and appears to be from the assignment booklet distributed to students at the beginning of the academic year.
SJSoM Pratiman Case Study Competition 2013
Computech Technologies should launch CBA & CFM or CPBA & CFM first to maximize profit and minimize risk. These combinations require the fewest number of students (around 23) to break even based on their costs. CBA & CFM is preferred because it requires around 3 students per course, which is a safe assumption for the untested brand.
A logistic regression model was created using 341 data points to predict enrollment in 3-month courses. The model found that only age was a significant predictor, with older customers less likely to enroll. The optimal model has a constant of 5.622 and an age coefficient of -0.133. This indicates the target profile for these short courses should be younger consumers.
Engineering economics and life cycle cost analysis
Abstract Life-cycle cost analysis (LCCA) is anevaluating tool to valuate the total financial/resource requirements for total ownership of a
building. LCCA is effective when project options that fulfill the same task demands, having different initial costs and operational
costs, needs to be examined in order to undertake the option that optimizes financial requirements.
Building-related expenses can be furthercategorized into the following:
Initial Costs
Operation, Maintenance, and Repair Costs
Replacement Costs
Residual Values
Finance Charges
Non-Monetary Costs
This article mainly focuses on the Maintenance and Repair cost analysis; giving probable trends for next 25 years for various
elements using DSR, WPI and CPI. These trends are only applicable for the whole of Mumbai.
Keyordsw: Life Cycle Cost, Maintenance and Repair cost.
L012328593
The document discusses using Six Sigma methodology to identify the root causes of lining thickness variation defects in brake shoes during production. Six Sigma is a quality improvement process used to reduce defects by minimizing variation and improving manufacturing processes. The company was experiencing high rejection rates due to lining thickness variation defects, resulting in increased rework and scrap costs. The author aims to apply the Define, Measure, Analyze, Improve, and Control phases of Six Sigma to identify the root causes of the defects and reduce rejection levels. Data on production volumes and defects over the last six months was collected and analyzed. An Ishikawa diagram was created to identify potential causes of the defects related to materials, machines, methods, measurements and personnel.
An Approach To Sourcing Optimization At A High Volume Soft Drink Manufacturer
This document is a thesis submitted by Sandeep Khattar to MIT in 2006. It aims to develop an approach to optimize sourcing decisions at the Pepsi Bottling Group (PBG) by determining the optimal plants to produce each product. PBG operates a large and complex supply chain network in the US and seeks to reduce costs while meeting business constraints. The thesis will develop an optimization model, analyze model outputs, and propose an implementation plan to integrate the optimization tool into PBG's planning processes.
Ijebea14 275
This case study examines quality improvement efforts at Caparo Maruti Ltd through the application of Six Sigma methodology. The company manufactures sheet metal automobile parts, including cross members. Data was collected on inspections of 187525 cross member parts over 5 months, finding 67 defects. Major defects included welding failures causing nut misplacement or damage. Pareto and line charts identified the primary defect as M8 nut failure during projection welding. Root cause analysis using a fishbone diagram indicated issues with the welding process, including variation in weld gun position, nut placement, and material quality. Recommendations were made to improve the welding process and reduce defects.
resume revised
This document is a resume for Arunima Singh summarizing her educational and professional background. It outlines her educational qualifications including a B.Tech in ECE from Lovely Professional University in 2014 with a 6.71 CGPA. It lists her technical skills in languages like C++ and Java and operating systems like Windows. It describes two projects she undertook as an undergraduate student involving early warning crack detection in railway tracks using GSM and a density sensing traffic control system with emergency remote control. It provides details of her work experience, extracurricular activities, languages known, and personal details.
AMol R CV @ 29 Nov 2016
This curriculum vitae summarizes Amol Mahulkar's professional experience and qualifications. He currently works as a Business Intelligence Analyst at Honeywell with over 11 years of experience in roles such as Innovation Manager, Intellectual Property Analyst, and Research Fellow. He holds a PhD in Chemical Engineering and has published numerous research papers. His expertise includes business analysis, innovation management, and intellectual property portfolio development.
Root Causes Analysis for Lean Maintenance Using Six Sigma Approach
The aim of the project is to reduce rejection level of needle roller bearing assembly using six sigma techniques. Six Sigma is a quality improvement tool for product. It reduces the defects, minimizes the variation and improves the capability of the manufacturing process. The main objective of Six Sigma is to increase the profit margin, improve financial condition through minimizing the defects rate of product. Further it increases the customer satisfaction, retention and produces the best class product from the best process performance. The needle roller bearing has more Lining Thickness Variation (LTV) defect and bearing Fits like loose fit and tight fit in the production line. The current rejection level of lining thickness variation defect is very high which leads to consumption of money in the form of rework and rejection of the job. The aim of the project is to identify the causes for various assembly defect and its remedies to reduce rejection level in needle roller bearing
ISO 9001 Certifying Productions & Operations Management at KPUE.docx
ISO 9001: Certifying Productions & Operations Management at KPU
ENTR 3130 S50- 2017
Prepared for: Dr. W J Tutlewski, EdD
Date: March 13, 2017
Statement of Academic Honesty
We the undersigned declare that the work performed for this project and the contents of this report represent only original work of or by the members of the team. Any work that has been included from outside sources or quotations will be properly cited and referenced throughout the report.
______________________________
Jag Bains (100274849)
_______________________________
Majed Alawwad (100256277)
_______________________________
Gavy Barn (100258411)
______________________________
Sumit Minhas (100267819)Executive Summary
Aim
The aim of this report is to evaluate the current process used at Kwantlen Polytechnic University and help them get the ENTR 3130 course ISO 9001 certified by the end of 2017. This report covers the current processes used and the improvements required to gain the certification. The sections discussed in this report will give KPU a better understand on the changes need to sustain a high-quality management system.
Background
ISO 9001 is an international standard which established the requirements to order to ensure the company is using the best method of quality management system. The standard focuses on strong customer focus, motivation and implication of top management, and continual improvement (ISO, 2015). The result of the successful implementation of the certification will ensure that the university will acquire more of a market share as the number of students registered will increase.
The report consists of ten sections from the ISO 9001 standard in which both the current and future processed are discussed. Kwantlen Polytechnic University is a diverse university offering a wide arrange of programs and is continually improving upon its standards. They have developed a strategic plan that emphasis quality, reputation, and relevance. To meet the strategic plan that Kwantlen set for themselves the ISO 9001 certification will help them manage their resources and policies. Furthermore, by incorporating the certification KPU can maintain a competitive advantage from improved quality management.
Currently, KPU does not have a consistent curriculum or textbooks for ENTR 3130. There are professors who have different versions of books or authors required for students. Additionally, the course curriculum varies from professor to professor and causes students to believe that each of the professor requires the same amount of work throughout the semester. One way to counter this is to have all the professors teaching the course and the committee member of the business department, develop one standard course outline in which all the instructors follow. This includes using the same textbook and keeping the core curriculum the same throughout the year.
To evaluate the performance of the course, methods such as the student appraisal surveys at.
Paperon copo measurement
This document discusses measuring attainment of course outcomes (COs) and program outcomes (POs) as per the guidelines of the Self-Assessment Report (SAR) published by the National Board of Accreditation (NBA) for engineering programs in India. It presents a simplified approach for measuring CO and PO attainment. Course outcomes are defined for each course and mapped to POs on a scale of 1-3. The attainment of COs is measured based on student performance in internal and external assessments. The percentage of students achieving the target score for each CO is calculated and averaged to determine the CO attainment level based on NBA guidelines. This process is demonstrated through an example course. The CO attainment levels across
Engineering Curriculum
To earn a bachelor's degree from Elizabethtown College, students must complete a minimum of 125 credits. Some programs may require more credits. Students can only earn one bachelor's degree but may complete additional majors, minors, or teaching certifications. The document outlines the course requirements for a Bachelor of Science degree in Engineering with emphases in Electrical, Mechanical, or Sustainable Design engineering. It lists the required engineering and other science courses that must be taken along with minimum grade requirements.
Barc level 2 training
The document provides information about the Training Course on Radiography Testing Level-2 conducted by Bhabha Atomic Research Centre. The 22-day course trains candidates in industrial radiography and proper use of radiation sources according to international standards. It covers topics like radiation safety, selecting testing methods, interpreting results, and preparing instructions. Candidates with relevant educational qualifications and work experience can apply. Successful candidates will receive a certificate qualifying them to work as certified industrial radiographers and radiation safety officers.
Metropolitan college case study analysis
METROPOLITAN COLLEGE CASE QUESTIONS:
1. What is Mary hoping to achieve by implementing a process change?
2. Draw a Process diagram for student registration
3. What is the utilization rate at each step in the process? What is the overall capacity of the process?
4. What changes you would suggest making to the process? Why?
SUMMER INTERNSHIP REPORT (Anchor Electricals Pvt. Ltd.)
Implementation of 5S technique leads to subsequent improvement in productivity of the manufacturing company. The 5S improves environmental performance and thus relate primarily in reduction of wastes in manufacturing. It promotes neatness in storage of raw material and finished products. The 5S implementation leads to the improvement of the organization in many ways for instance. The implementation of the 5S system of rules leads to the following effects regarding the improvement in quality.
Summary Tesis Six Sigma by Joko Prasetiyo
This document describes a study analyzing student academic services performance at SMK Negeri 2 Yogyakarta vocational high school using Six Sigma methodology. The study aims to measure current performance using a SERVPERF instrument and identify ways to improve performance. The document provides background on SMK Negeri 2 Yogyakarta and discusses Six Sigma definitions and principles. It also reviews literature on previous studies applying Six Sigma and SERVQUAL in educational and service industry settings.
Bachelor Zeugnis
This document summarizes the academic record of a student from 2011 to 2014. It lists the courses taken each semester, including course codes, names, credits, grades and results. Over the period shown, the student earned a total of 180 credits with a weighted average of 7.4. The majority of credits were in mandatory courses, with no credits from optional or free choice courses.
Unofficial Transcripts
Sarah Cutting's grades summary from UBC shows that she has taken 27 courses between 2012 and 2015, earning a variety of grades from A+ to C-. Her average grade across all courses is 77%, above the average class grade for most courses.
An Internship report on Concorde Garments Group's Cover page and letter
An Internship Report on ‘Concorde Garments Group’
and topic “How to run an Export Oriented RMG factory and why worker unrest happening in Bangladesh”
Representacion grafica
This document appears to be from an Open Distance Learning Institute's Occupational Health program. It discusses anatomy and physiology and includes a list of topics to be covered, as well as a section on tissues in body systems where short descriptions will be provided. The goal is to provide essential information on human anatomy and physiology as part of an occupational health training program.
ROOT CAUSE ANALYSIS OF CONTROL ROD FRICTION PROBLEM IN DFIP USING SHAININ® A...
The two major challenges that industries are facing today are continuous improvement in productivity and quality of the product. Bosch Production System (BPS) - one of the leading manufacturers in Diesel system equipments, has been successfully employing the efficient statistical tool ‘Shainin®
’ for the root cause identification and Design of Experiments (DOE) techniques for analysis and optimization of the quality related issues. Shainin® is popular being a simplest and effective tool to employ in solving the manufacturing related problems. The present paper deals with one of the quality issues resolved by using Shainin® methodology in Diesel systems plant, Bosch Ltd., Bengaluru.
Application of Six-Sigma- A Case Study of an Automobile Lightening Company
This document describes a case study applying Six Sigma methodology to reduce defects at an automobile lighting company. It discusses using DMAIC (Define, Measure, Analyze, Improve, Control) to analyze the low beam module manufacturing process. Measurement found one fixture was applying insufficient glue, on average 11g vs the specification of 12-14g. Analysis identified the glue amount as a key factor affecting defects. The goal is reducing leakage defects in low beam modules to improve customer satisfaction.
Cbc auto servicing nc iii
The document outlines the competency-based curriculum for Automotive Servicing NC III. It includes modules on basic competencies like communication skills, problem-solving, and technology use. Common competencies cover tasks like vehicle movement, measurement, and shop maintenance. Core competencies focus on skills for servicing systems like electrical, engine, transmission, and air-conditioning. Additional modules provide instruction on installing LPG conversion kits, testing and adjusting LPG systems, and servicing auto LPG components. The course aims to enhance skills in automotive servicing according to industry standards over 440 hours of training.
More Related Content
Similar to 1451256LT
L012328593
The document discusses using Six Sigma methodology to identify the root causes of lining thickness variation defects in brake shoes during production. Six Sigma is a quality improvement process used to reduce defects by minimizing variation and improving manufacturing processes. The company was experiencing high rejection rates due to lining thickness variation defects, resulting in increased rework and scrap costs. The author aims to apply the Define, Measure, Analyze, Improve, and Control phases of Six Sigma to identify the root causes of the defects and reduce rejection levels. Data on production volumes and defects over the last six months was collected and analyzed. An Ishikawa diagram was created to identify potential causes of the defects related to materials, machines, methods, measurements and personnel.
An Approach To Sourcing Optimization At A High Volume Soft Drink Manufacturer
This document is a thesis submitted by Sandeep Khattar to MIT in 2006. It aims to develop an approach to optimize sourcing decisions at the Pepsi Bottling Group (PBG) by determining the optimal plants to produce each product. PBG operates a large and complex supply chain network in the US and seeks to reduce costs while meeting business constraints. The thesis will develop an optimization model, analyze model outputs, and propose an implementation plan to integrate the optimization tool into PBG's planning processes.
Ijebea14 275
This case study examines quality improvement efforts at Caparo Maruti Ltd through the application of Six Sigma methodology. The company manufactures sheet metal automobile parts, including cross members. Data was collected on inspections of 187525 cross member parts over 5 months, finding 67 defects. Major defects included welding failures causing nut misplacement or damage. Pareto and line charts identified the primary defect as M8 nut failure during projection welding. Root cause analysis using a fishbone diagram indicated issues with the welding process, including variation in weld gun position, nut placement, and material quality. Recommendations were made to improve the welding process and reduce defects.
resume revised
This document is a resume for Arunima Singh summarizing her educational and professional background. It outlines her educational qualifications including a B.Tech in ECE from Lovely Professional University in 2014 with a 6.71 CGPA. It lists her technical skills in languages like C++ and Java and operating systems like Windows. It describes two projects she undertook as an undergraduate student involving early warning crack detection in railway tracks using GSM and a density sensing traffic control system with emergency remote control. It provides details of her work experience, extracurricular activities, languages known, and personal details.
AMol R CV @ 29 Nov 2016
This curriculum vitae summarizes Amol Mahulkar's professional experience and qualifications. He currently works as a Business Intelligence Analyst at Honeywell with over 11 years of experience in roles such as Innovation Manager, Intellectual Property Analyst, and Research Fellow. He holds a PhD in Chemical Engineering and has published numerous research papers. His expertise includes business analysis, innovation management, and intellectual property portfolio development.
Root Causes Analysis for Lean Maintenance Using Six Sigma Approach
The aim of the project is to reduce rejection level of needle roller bearing assembly using six sigma techniques. Six Sigma is a quality improvement tool for product. It reduces the defects, minimizes the variation and improves the capability of the manufacturing process. The main objective of Six Sigma is to increase the profit margin, improve financial condition through minimizing the defects rate of product. Further it increases the customer satisfaction, retention and produces the best class product from the best process performance. The needle roller bearing has more Lining Thickness Variation (LTV) defect and bearing Fits like loose fit and tight fit in the production line. The current rejection level of lining thickness variation defect is very high which leads to consumption of money in the form of rework and rejection of the job. The aim of the project is to identify the causes for various assembly defect and its remedies to reduce rejection level in needle roller bearing
ISO 9001 Certifying Productions & Operations Management at KPUE.docx
ISO 9001: Certifying Productions & Operations Management at KPU
ENTR 3130 S50- 2017
Prepared for: Dr. W J Tutlewski, EdD
Date: March 13, 2017
Statement of Academic Honesty
We the undersigned declare that the work performed for this project and the contents of this report represent only original work of or by the members of the team. Any work that has been included from outside sources or quotations will be properly cited and referenced throughout the report.
______________________________
Jag Bains (100274849)
_______________________________
Majed Alawwad (100256277)
_______________________________
Gavy Barn (100258411)
______________________________
Sumit Minhas (100267819)Executive Summary
Aim
The aim of this report is to evaluate the current process used at Kwantlen Polytechnic University and help them get the ENTR 3130 course ISO 9001 certified by the end of 2017. This report covers the current processes used and the improvements required to gain the certification. The sections discussed in this report will give KPU a better understand on the changes need to sustain a high-quality management system.
Background
ISO 9001 is an international standard which established the requirements to order to ensure the company is using the best method of quality management system. The standard focuses on strong customer focus, motivation and implication of top management, and continual improvement (ISO, 2015). The result of the successful implementation of the certification will ensure that the university will acquire more of a market share as the number of students registered will increase.
The report consists of ten sections from the ISO 9001 standard in which both the current and future processed are discussed. Kwantlen Polytechnic University is a diverse university offering a wide arrange of programs and is continually improving upon its standards. They have developed a strategic plan that emphasis quality, reputation, and relevance. To meet the strategic plan that Kwantlen set for themselves the ISO 9001 certification will help them manage their resources and policies. Furthermore, by incorporating the certification KPU can maintain a competitive advantage from improved quality management.
Currently, KPU does not have a consistent curriculum or textbooks for ENTR 3130. There are professors who have different versions of books or authors required for students. Additionally, the course curriculum varies from professor to professor and causes students to believe that each of the professor requires the same amount of work throughout the semester. One way to counter this is to have all the professors teaching the course and the committee member of the business department, develop one standard course outline in which all the instructors follow. This includes using the same textbook and keeping the core curriculum the same throughout the year.
To evaluate the performance of the course, methods such as the student appraisal surveys at.
Paperon copo measurement
This document discusses measuring attainment of course outcomes (COs) and program outcomes (POs) as per the guidelines of the Self-Assessment Report (SAR) published by the National Board of Accreditation (NBA) for engineering programs in India. It presents a simplified approach for measuring CO and PO attainment. Course outcomes are defined for each course and mapped to POs on a scale of 1-3. The attainment of COs is measured based on student performance in internal and external assessments. The percentage of students achieving the target score for each CO is calculated and averaged to determine the CO attainment level based on NBA guidelines. This process is demonstrated through an example course. The CO attainment levels across
Engineering Curriculum
To earn a bachelor's degree from Elizabethtown College, students must complete a minimum of 125 credits. Some programs may require more credits. Students can only earn one bachelor's degree but may complete additional majors, minors, or teaching certifications. The document outlines the course requirements for a Bachelor of Science degree in Engineering with emphases in Electrical, Mechanical, or Sustainable Design engineering. It lists the required engineering and other science courses that must be taken along with minimum grade requirements.
Barc level 2 training
The document provides information about the Training Course on Radiography Testing Level-2 conducted by Bhabha Atomic Research Centre. The 22-day course trains candidates in industrial radiography and proper use of radiation sources according to international standards. It covers topics like radiation safety, selecting testing methods, interpreting results, and preparing instructions. Candidates with relevant educational qualifications and work experience can apply. Successful candidates will receive a certificate qualifying them to work as certified industrial radiographers and radiation safety officers.
Metropolitan college case study analysis
METROPOLITAN COLLEGE CASE QUESTIONS:
1. What is Mary hoping to achieve by implementing a process change?
2. Draw a Process diagram for student registration
3. What is the utilization rate at each step in the process? What is the overall capacity of the process?
4. What changes you would suggest making to the process? Why?
SUMMER INTERNSHIP REPORT (Anchor Electricals Pvt. Ltd.)
Implementation of 5S technique leads to subsequent improvement in productivity of the manufacturing company. The 5S improves environmental performance and thus relate primarily in reduction of wastes in manufacturing. It promotes neatness in storage of raw material and finished products. The 5S implementation leads to the improvement of the organization in many ways for instance. The implementation of the 5S system of rules leads to the following effects regarding the improvement in quality.
Summary Tesis Six Sigma by Joko Prasetiyo
This document describes a study analyzing student academic services performance at SMK Negeri 2 Yogyakarta vocational high school using Six Sigma methodology. The study aims to measure current performance using a SERVPERF instrument and identify ways to improve performance. The document provides background on SMK Negeri 2 Yogyakarta and discusses Six Sigma definitions and principles. It also reviews literature on previous studies applying Six Sigma and SERVQUAL in educational and service industry settings.
Bachelor Zeugnis
This document summarizes the academic record of a student from 2011 to 2014. It lists the courses taken each semester, including course codes, names, credits, grades and results. Over the period shown, the student earned a total of 180 credits with a weighted average of 7.4. The majority of credits were in mandatory courses, with no credits from optional or free choice courses.
Unofficial Transcripts
Sarah Cutting's grades summary from UBC shows that she has taken 27 courses between 2012 and 2015, earning a variety of grades from A+ to C-. Her average grade across all courses is 77%, above the average class grade for most courses.
An Internship report on Concorde Garments Group's Cover page and letter
An Internship Report on ‘Concorde Garments Group’
and topic “How to run an Export Oriented RMG factory and why worker unrest happening in Bangladesh”
Representacion grafica
This document appears to be from an Open Distance Learning Institute's Occupational Health program. It discusses anatomy and physiology and includes a list of topics to be covered, as well as a section on tissues in body systems where short descriptions will be provided. The goal is to provide essential information on human anatomy and physiology as part of an occupational health training program.
ROOT CAUSE ANALYSIS OF CONTROL ROD FRICTION PROBLEM IN DFIP USING SHAININ® A...
The two major challenges that industries are facing today are continuous improvement in productivity and quality of the product. Bosch Production System (BPS) - one of the leading manufacturers in Diesel system equipments, has been successfully employing the efficient statistical tool ‘Shainin®
’ for the root cause identification and Design of Experiments (DOE) techniques for analysis and optimization of the quality related issues. Shainin® is popular being a simplest and effective tool to employ in solving the manufacturing related problems. The present paper deals with one of the quality issues resolved by using Shainin® methodology in Diesel systems plant, Bosch Ltd., Bengaluru.
Application of Six-Sigma- A Case Study of an Automobile Lightening Company
This document describes a case study applying Six Sigma methodology to reduce defects at an automobile lighting company. It discusses using DMAIC (Define, Measure, Analyze, Improve, Control) to analyze the low beam module manufacturing process. Measurement found one fixture was applying insufficient glue, on average 11g vs the specification of 12-14g. Analysis identified the glue amount as a key factor affecting defects. The goal is reducing leakage defects in low beam modules to improve customer satisfaction.
Cbc auto servicing nc iii
The document outlines the competency-based curriculum for Automotive Servicing NC III. It includes modules on basic competencies like communication skills, problem-solving, and technology use. Common competencies cover tasks like vehicle movement, measurement, and shop maintenance. Core competencies focus on skills for servicing systems like electrical, engine, transmission, and air-conditioning. Additional modules provide instruction on installing LPG conversion kits, testing and adjusting LPG systems, and servicing auto LPG components. The course aims to enhance skills in automotive servicing according to industry standards over 440 hours of training.
Similar to 1451256LT (20)
An Approach To Sourcing Optimization At A High Volume Soft Drink Manufacturer
An Approach To Sourcing Optimization At A High Volume Soft Drink Manufacturer
Root Causes Analysis for Lean Maintenance Using Six Sigma Approach
Root Causes Analysis for Lean Maintenance Using Six Sigma Approach
ISO 9001 Certifying Productions & Operations Management at KPUE.docx
ISO 9001 Certifying Productions & Operations Management at KPUE.docx
SUMMER INTERNSHIP REPORT (Anchor Electricals Pvt. Ltd.)
SUMMER INTERNSHIP REPORT (Anchor Electricals Pvt. Ltd.)
An Internship report on Concorde Garments Group's Cover page and letter
An Internship report on Concorde Garments Group's Cover page and letter
ROOT CAUSE ANALYSIS OF CONTROL ROD FRICTION PROBLEM IN DFIP USING SHAININ® A...
ROOT CAUSE ANALYSIS OF CONTROL ROD FRICTION PROBLEM IN DFIP USING SHAININ® A...
Application of Six-Sigma- A Case Study of an Automobile Lightening Company
Application of Six-Sigma- A Case Study of an Automobile Lightening Company
1451256LT
- 1. MM3009 16.00APROJECT MM3445 4.00BCONTAMINATION CONTROL & CLEANROOM TECHNOLOGY MS6231 4.00BBIOSTATISTICS ALLOWED TO CONTINUE IN THE COURSE SEMESTER GPA: 3.667 CUMULATIVE GPA: 3.665 EXAMINATION RESULTS 2016/2017 SEMESTER 1 DIPLOMA IN BIOENGINEERING STAGE 3B FULL-TIME SHAUN LEE KAI WEN ADM. NO. 1451256 19 SEP 2016 MODULE MODULE NAME GRADE CREDIT UNITS_______________________________________________________________________________________________ GRADING SYSTEM (With Effect From 2004/2005) GRADING SYSTEM (Prior to 2004/2005) GRADE DESCRIPTION GRADE GRADE DESCRIPTION GRADE GRADE DESCRIPTION POINT POINT DIST - DISTINCTION 4.0 P - NON-GRADED PASS 0.5 DIST - DISTINCTION A - EXCELLENT (80% - 100%) 4.0 UG - NON GRADED PASS NA A - VERY GOOD (80% - 100%) B+ - VERY GOOD (75% - 79%) 3.5 UP - PASS IN A MODULE WHICH NA B - CREDIT (70% - 79%) B - GOOD (70% - 74%) 3.0 HAS NO GRADE POINT C - GOOD PASS (60% - 69%) C+ - GOOD CREDIT (65% - 69%) 2.5 UF - FAIL IN A MODULE WHICH NA D - PASS (50% - 59%) C - CREDIT (60% - 64%) 2.0 HAS NO GRADE POINT E - SUBSIDIARY PASS D+ - GOOD PASS (55% - 59%) 1.5 EX - EXEMPTED NA F - FAIL D - PASS (50% - 54%) 1.0 ABS - ABSENT 0.0 P - PASS FOR A NON-GRADED MODULE D- - SUBSIDIARY PASS 0.5 EX - EXEMPTED F - FAIL 0.0 ABS - ABSENT Semester and Cumulative GPA scores shown above (if any) do not include modules marked with an asterisk(*).