The document provides information about the Nepal Engineering Council (NEC) Act and Regulation. Some key points:
- NEC is an autonomous body formed under the NEC Act, 2055 to regulate engineering profession.
- The Act defines registration of engineers in three categories and the application process. NEC conducts examinations biannually for registration.
- Objectives of NEC include setting engineering education standards, approving degrees, and registering engineers meeting qualifications.
- Regulations further define registration categories and removal from registration book for certain offenses. NEC coordinates with the government through the Ministry of Physical Infrastructure and Transport.
Professionalism and Codes of Ethics Engineering Societies (Malaysia and International)Registration of Engineers with Board of Engineers (BEM) Route to be Professional Engineer Guideline for Code of Professional conductSharing Experience - Invited Speakers
Chapter 3 roles of professional organizations in regulation and professionalHari Krishna Shrestha
Lecture Notes on Chapter 3 (Role of Profession Organizations in Regulation and Professional Development, BE, Nepal Engineering College, Pokhara University.
Professionalism and Codes of Ethics Engineering Societies (Malaysia and International)Registration of Engineers with Board of Engineers (BEM) Route to be Professional Engineer Guideline for Code of Professional conductSharing Experience - Invited Speakers
Chapter 3 roles of professional organizations in regulation and professionalHari Krishna Shrestha
Lecture Notes on Chapter 3 (Role of Profession Organizations in Regulation and Professional Development, BE, Nepal Engineering College, Pokhara University.
NCLT Vs NCLAT: How do these two tribunals differentiate from each other and what decisions do they make? In this particular presentation, you are going to gain knowledge in depth about these matters. For more information, reach out to Registrationwala.
https://goo.gl/ewh8M7
Various Licenses Required to Set Up a Factory in Delhiyash pune
This Presentation will apprise you of various licenses that are required to be approved by the competent authorities in Delhi. The licenses in this ppt will include Factory Plan Approval, Factory License, DPCC Certificate (Orange category), Employee State Insurance Registration, Fire Safety Certificate/NOC and Employee Provident Fund. All these are New Delhi oriented and anyone who needs to obtain any of these certifications can refer to this ppt and can share your suggestions.
If you attain the status of CPEng in New Zealand, you will be considered an experienced engineering professional who has been evaluated as fulfilling a quality mark of excellence.
Professionalism and Codes of Ethics Engineering Societies (Malaysia and International)Registration of Engineers with Board of Engineers (BEM) Route to be Professional Engineer Guideline for Code of Professional conductSharing Experience - Invited Speakers
NCLT Vs NCLAT: How do these two tribunals differentiate from each other and what decisions do they make? In this particular presentation, you are going to gain knowledge in depth about these matters. For more information, reach out to Registrationwala.
https://goo.gl/ewh8M7
Various Licenses Required to Set Up a Factory in Delhiyash pune
This Presentation will apprise you of various licenses that are required to be approved by the competent authorities in Delhi. The licenses in this ppt will include Factory Plan Approval, Factory License, DPCC Certificate (Orange category), Employee State Insurance Registration, Fire Safety Certificate/NOC and Employee Provident Fund. All these are New Delhi oriented and anyone who needs to obtain any of these certifications can refer to this ppt and can share your suggestions.
If you attain the status of CPEng in New Zealand, you will be considered an experienced engineering professional who has been evaluated as fulfilling a quality mark of excellence.
Professionalism and Codes of Ethics Engineering Societies (Malaysia and International)Registration of Engineers with Board of Engineers (BEM) Route to be Professional Engineer Guideline for Code of Professional conductSharing Experience - Invited Speakers
Similar to 10.6_Project Management_Day 12.pptx (20)
Engineering professional practice: Environment and society; professional ethics; regulatory environment; contemporary issues/problems in engineering; occupational health and safety; roles/responsibilities of Nepal Engineers Association (NEA).
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Water billing management system project report.pdfKamal Acharya
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Online aptitude test management system project report.pdfKamal Acharya
The purpose of on-line aptitude test system is to take online test in an efficient manner and no time wasting for checking the paper. The main objective of on-line aptitude test system is to efficiently evaluate the candidate thoroughly through a fully automated system that not only saves lot of time but also gives fast results. For students they give papers according to their convenience and time and there is no need of using extra thing like paper, pen etc. This can be used in educational institutions as well as in corporate world. Can be used anywhere any time as it is a web based application (user Location doesn’t matter). No restriction that examiner has to be present when the candidate takes the test.
Every time when lecturers/professors need to conduct examinations they have to sit down think about the questions and then create a whole new set of questions for each and every exam. In some cases the professor may want to give an open book online exam that is the student can take the exam any time anywhere, but the student might have to answer the questions in a limited time period. The professor may want to change the sequence of questions for every student. The problem that a student has is whenever a date for the exam is declared the student has to take it and there is no way he can take it at some other time. This project will create an interface for the examiner to create and store questions in a repository. It will also create an interface for the student to take examinations at his convenience and the questions and/or exams may be timed. Thereby creating an application which can be used by examiners and examinee’s simultaneously.
Examination System is very useful for Teachers/Professors. As in the teaching profession, you are responsible for writing question papers. In the conventional method, you write the question paper on paper, keep question papers separate from answers and all this information you have to keep in a locker to avoid unauthorized access. Using the Examination System you can create a question paper and everything will be written to a single exam file in encrypted format. You can set the General and Administrator password to avoid unauthorized access to your question paper. Every time you start the examination, the program shuffles all the questions and selects them randomly from the database, which reduces the chances of memorizing the questions.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
An Approach to Detecting Writing Styles Based on Clustering Techniquesambekarshweta25
An Approach to Detecting Writing Styles Based on Clustering Techniques
Authors:
-Devkinandan Jagtap
-Shweta Ambekar
-Harshit Singh
-Nakul Sharma (Assistant Professor)
Institution:
VIIT Pune, India
Abstract:
This paper proposes a system to differentiate between human-generated and AI-generated texts using stylometric analysis. The system analyzes text files and classifies writing styles by employing various clustering algorithms, such as k-means, k-means++, hierarchical, and DBSCAN. The effectiveness of these algorithms is measured using silhouette scores. The system successfully identifies distinct writing styles within documents, demonstrating its potential for plagiarism detection.
Introduction:
Stylometry, the study of linguistic and structural features in texts, is used for tasks like plagiarism detection, genre separation, and author verification. This paper leverages stylometric analysis to identify different writing styles and improve plagiarism detection methods.
Methodology:
The system includes data collection, preprocessing, feature extraction, dimensional reduction, machine learning models for clustering, and performance comparison using silhouette scores. Feature extraction focuses on lexical features, vocabulary richness, and readability scores. The study uses a small dataset of texts from various authors and employs algorithms like k-means, k-means++, hierarchical clustering, and DBSCAN for clustering.
Results:
Experiments show that the system effectively identifies writing styles, with silhouette scores indicating reasonable to strong clustering when k=2. As the number of clusters increases, the silhouette scores decrease, indicating a drop in accuracy. K-means and k-means++ perform similarly, while hierarchical clustering is less optimized.
Conclusion and Future Work:
The system works well for distinguishing writing styles with two clusters but becomes less accurate as the number of clusters increases. Future research could focus on adding more parameters and optimizing the methodology to improve accuracy with higher cluster values. This system can enhance existing plagiarism detection tools, especially in academic settings.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
3. Nepal Engineering Council Act, 2055 (Previous NEC Act, 2055 is Amendment in
2079); and regulations, 2057
• Nepal Engineering Council (NEC) is an autonomous body formed under the NEC Act,
2055 for regulating the engineering profession systematically and scientifically.
• NEC has been vested with the statutory authority for the planning, coordinated
development and monitoring of engineering profession and education in the country.
NEC Act 2055 gives an outline on the formation of the Council, its tenure and the roles
and responsibilities of the Chairman, Vice Chairman and the Registrar.
• Nepal Engineering Council Rules, 2057 has also been prepared and approved by
Government of Nepal as per the provision of Clause 37 of the Act. It defines the
registration of engineers into three categories as well as the formats for application:
a) General Registered Engineer
b) Professional Engineer
c) Non - Nepali Registered Engineer
4. Nepal Engineering Council Act, 2055 (Previous NEC Act, 2055 is Amendment in
2079); and regulations, 2057
• Nepal Engineering Council (NEC) is an autonomous body formed under the NEC Act,
2055 for regulating the engineering profession systematically and scientifically.
• The date of Royal Seal and Publication of NEC Act 2055 is 2055-11-27 B.S
• NEC has been vested with the statutory authority for the planning, coordinated
development and monitoring of engineering profession and education in the country.
NEC Act 2055 gives an outline on the formation of the Council, its tenure and the roles
and responsibilities of the Chairman, Vice Chairman and the Registrar.
• Nepal Engineering Council Rules, 2057 has also been prepared and approved by
Government of Nepal as per the provision of Clause 37 of the Act. It defines the
registration of engineers into three categories as well as the formats for application:
a) General Registered Engineer
b) Professional Engineer
c) Non - Nepali Registered Engineer
5. Main objectives of NEC
• To prepare policies, plans and programs for the smooth functioning of the engineering
profession and to execute them
• To set norms and standards for engineering education in Nepal
• To grant permission and approval to carry out engineering education to those
engineering colleges and institutions that meet the required norms and standards and to
honor their degrees and certificates
• To monitor and inspect the quality of engineering education provided by the
engineering colleges and institutions
• To fix the qualification necessary in order to practice engineering profession and to
register their name in the Council
• To remove their name from the registration of the engineering Council if found to violate
the code of ethics.
6. Main objectives of NEC
• Nepal Engineering Council Rules, 2057 has also been prepared and approved by the
Government as per the provision of Clause 37 of the Act. It defines the registration of
engineers into three following categories .
• General Engineer: Minimum requirement B.E. degree
• Professional Engineer: Minimum M.E. degree
• Foreign Engineer :Minimum B.E. degree and 10 years of Experience
7. NEC Act, 2055
Total numbers of members in Council are 21.
• 1 Chairman-An Er. Nominated by Government of Nepal, minimum requirement: B.E. plus
15 years of experience.
• 1 Vice-chairman: An Er. Nominated by Government of Nepal, minimum requirement:
B.E. plus 10 years of experience.
• 7 Members among Nepalese Engineers (One from each provinces)
• 1 Member-President NEA.
• 5 members- Engineers elected by Elected by NEA.
• 1 Member-Among the campus chief of Engineering College of Nepal
• 1 member-Representative, IOE, TU
• 1 member nominated by NEC among the engineers who is in teaching or in acedamic
field.
• 2 Members-Nominated by Council (with 7 years of professional experiences)
8. NEC Act, 2055
• 1 Registrar-Member secretary
• The tenure of the members of Council is 4 years.
• Meetings for Council shall generally be held 4 times in years.
• Presence of more than 50% of member shall be considered as the quorum for meeting
of Council.
Disqualification for being a member
• Non-Nepalese citizen
• Bankrupt person
• Engaged in corruption, human trafficking etc.
• Criminal Person
• Mentally disordered person
•DV/PR Holder
10. • नाम दर्ाा नगराई इञ्जननयररङ्ग व्यवसाय गना नहुने (Prohibition to Practice Engineering
Profession without Getting Registered name) व्यवस्था नेपाल इनञ्जननयररङ पररषद ऐन,
२०५५ को दफा (Clause) ११ मा गररएको छ।
• नाम दर्ाा लानग दरखास्त नदने (Application to be made for the Registration of Name)
व्यवस्था नेपाल इनञ्जननयररङ पररषद ऐन, २०५५ को दफा (Clause) १२ मा गररएको छ।
• नाम दर्ााका लानग पररक्षा नलने, पररक्षा सनमनर्, पररक्षा सञ्चालन लगाएर्को व्यवस्था नेपाल
इनञ्जननयररङ पररषद ऐन, २०७९ को दफा (Clause) १४ मा रहेको छ।
• नेपाल इनञ्जननयररङ पररषद ऐन, २०५५ को दफा (Clause) १४ मा ५ सदस्यीय परिक्षा
सनमनर् र्था कम्तीमा वर्षको दुई पटक परीक्षा सञ्चालन गनना पने व्यवस्था रहेको छ।
11. • नाम दर्ाा नगराई इञ्जननयररङ्ग व्यवसाय गना नहुने (Prohibition to Practice Engineering
Profession without Getting Registered name) व्यवस्था नेपाल इनञ्जननयररङ पररषद ऐन,
२०५५ को दफा (Clause) ११ मा गररएको छ।
• नाम दर्ाा लानग दरखास्त नदने (Application to be made for the Registration of Name)
व्यवस्था नेपाल इनञ्जननयररङ पररषद ऐन, २०५५ को दफा (Clause) १२ मा गररएको छ।
• नाम दर्ााका लानग पररक्षा नलने, पररक्षा सनमनर्, पररक्षा सञ्चालन लगाएर्को व्यवस्था नेपाल
इनञ्जननयररङ पररषद ऐन, २०७९ को दफा (Clause) १४ मा रहेको छ।
• नेपाल इनञ्जननयररङ पररषद ऐन, २०५५ को दफा (Clause) १४ मा ५ सदस्यीय परिक्षा
सनमनर् र्था कम्तीमा वर्षको दुई पटक परीक्षा सञ्चालन गनना पने व्यवस्था रहेको छ।
12. Name to be removed from the Registration Book (Clause 18)
• If he/she becomes mentally unsound.
• If his property has been divided proportionally among the creditors for having failed to
pay the debts due to the creditor. (If he becomes bankrupt),
• If a motion submitted to a meeting of the Council to remove, he name from the
Registration Book on the charge of violating the professional code of conduct as
prescribed is passed by a two-thirds majority,
• If he is convicted by a court in a criminal charge involving moral turpitude,
• If the name of a person who does not possess the required qualifications has happened
to be registered by fraud or error
(Name to be Registered Again: the concerned person may after a duration of at least one
year from the date on which such decision for removal is taken, submit an application to
the Council in accordance with Section 12 with specifying the justifiable reasons therein for
re-registration of the name)
13. Name to be removed from the Registration Book (Clause 18)
• If he/she becomes mentally unsound.
• If his property has been divided proportionally among the creditors for having failed to
pay the debts due to the creditor. (If he becomes bankrupt),
• If a motion submitted to a meeting of the Council to remove, he name from the
Registration Book on the charge of violating the professional code of conduct as
prescribed is passed by a two-thirds majority,
• If he is convicted by a court in a criminal charge involving moral turpitude,
• If the name of a person who does not possess the required qualifications has happened
to be registered by fraud or error
(Name to be Registered Again: the concerned person may after a duration of at least one
year from the date on which such decision for removal is taken, submit an application to
the Council in accordance with Section 12 with specifying the justifiable reasons therein for
re-registration of the name)
14. • Any person practicing engineering profession without registration in the NEC may be liable
to a punishment with fine of an amount 10,000 or with imprisonment of duration of up to 3
months or both.
• Any person who perform his activities against the NEC Act, 2079, may be liable to a
punishment with fine of an amount 25,000.
• If registered engineers wh0 violate or doesnot obey professional code of conduct may be
liable to punishment of
a. Make him aware
b. Suspense from the registration list of NECs with some fixed duration
c. Certificate to be cancelled
• If any person does not council decision of punishment, may file his dissatisfaction in High
Court, within 35 days after receiving of formal notice of such punishment.
Contact with Government of Nepal
• NEC will contact the government of Nepal through Ministry of Physical Infrastructure and
Transport.
Offences and Punishment and Penalties
15. Classification of Registration
• General Registered Engineer (Completed Bachelor Degree in Engineering)
• Professional Engineer (Completed Master Degree in Engineering)
• Non - Nepali Registered Engineer (Completed Master Degree in Engineering)
• Non - Nepali Engineer can be registered in NEC having more than 10 years experiences in engineering
professions and registered initially for two years and can be renewed for one years at a time as requested by
the client.
• The member secretory shall issues NEC registration certificate within 45 days after the request.
• NEC should publish the registered engineers list in every fiscal year and should updates and published the list
in every four years but name of Non - Nepali Registered Engineer is not published.
• NEC can form three members committee to investigate the any charges to registered engineer.
• Generally, engineer is suspended for two months form NEC registration, if she/he is charged against the
engineering professions.
• The register shall made sign in oath (प्रनर्ज्ञा पत्र) regarding obeying of professional code of conduct before
issuing registration certificate
NEC Regulation-2057 (Start from 2057-03-08)
16. • Registration for Title of Professional Engineer, PEng (Nepal), Guidelines for the Applicants,
March 2016 (Second Amendment July 2022).
• Applicants must have completed a minimum of weighted 60 hours of Continuing
Professional Development (CPD) per year to be eligible to apply for the title of Professional
Engineer (PEng -Nepal).
• Minimum criteria that applicants must meet for the registration of PEng.
Be registered under the General Category of the Nepal Engineering Council.
Hold a Master’s Degree in engineering from a university recognized by the NEC
Have attained a suitable level of professional experience
Professional Engineer
17. • The aim of CPD is to provide framework for overall professional development and career
progression.
Type of CPD Activities
• Formal Education & Training
• Informal Learning as a) On the job learning b) Private study
• Conference and Technical Meetings
• Presentation of Papers
• Engineering Services Activities
CPD record is needed for the registration of Professional Engineers
Continuing professional development (CPD)
18. Practice Questions
1.NEC was established in ……………B.S.
a. 2020 b. 2022 c. 2024 d. 2055
2.The Nepalese Engineers day is
a. 4th, Shrawan b. 4th, Jestha c. 3rd, Shrawan d. 3rd, Jestha
3. Registrar of NEC is nominated by
a. NEC chairman b. Government of Nepal
c. NEC secretary d. Open Competition
4. Requirement for the registration of foreign engineer as per NEC act and regulation is:
a. Bachelor degree b.10 yrs. of Experience c. both a & b d. Master degree
5. What is fine amount, if some is practicing the engineering without registration in NEC?
a. NRs 2000. b. NRs 5000. c. NRs 10000 d. NRs 25000
6. NEC publishes the name of registered engineer
a. Every year b. every 4 year c. Both a & b d. none
19. Practice Questions
1. The number of members in Nepal Engineering Association are
a.15 b.10 c.20 d.25
2. NEA was established in …………..B.S.
a. 2019 b.2022 c.2024 d.2055
3. The tenure of NEA members is
a.1 b.2 c.53 d.4
4. Who can be the members of NEA
a. only civil engineers b. only engineers from nepal
c. any engineers through out the world c. engineers who registred in NEC
5. NEA is
a. political organization b. social organization
b. c.profit oriended organization d. all of the above