1). A) ipsilateralBelow the point of spinal cord, the nerve paths .pdf
•
0 likes•2 views
1). A) ipsilateral Below the point of spinal cord, the nerve paths belong to the same side (no crossing over occurs). So, the nociceptive information can be found on the same side of the body. Solution 1). A) ipsilateral Below the point of spinal cord, the nerve paths belong to the same side (no crossing over occurs). So, the nociceptive information can be found on the same side of the body..
Report
Share
Report
Share
Download to read offline
Recommended
H2SO4 may act as 1) an acidexample 2NaOH + H2SO4 - Na2SO4 +.pdf
to minimise the length, term with \'m\' should be reduced so first to absolute values
must be opened with negative sign S2 = -4m+1 - 5m+6 + 10m-3 S2 = m+4
Solution
to minimise the length, term with \'m\' should be reduced so first to absolute values
must be opened with negative sign S2 = -4m+1 - 5m+6 + 10m-3 S2 = m+4.
Computer graphics are pictures and movies produced use computers fre.pdf
no. of sand grains in 1 truck = 10/0.1 x 10 ^-6=10^8 sand grains total time taken=
(10 X 6.02x10^23 x 10 )/10^8= 6.02 x 10^17 min= 6.872 x 10^ 13 years
Solution
no. of sand grains in 1 truck = 10/0.1 x 10 ^-6=10^8 sand grains total time taken=
(10 X 6.02x10^23 x 10 )/10^8= 6.02 x 10^17 min= 6.872 x 10^ 13 years.
Circle.javaimport java.text.DecimalFormat;public class Circle {.pdf
NaCl - sodium chloride MgO - magnesium oxide AgI - silver iodiode check its not
L CuSO4 - copper sulphate
Solution
NaCl - sodium chloride MgO - magnesium oxide AgI - silver iodiode check its not
L CuSO4 - copper sulphate.
C is correct. Only the host that the unicast message is addressed to.pdf
mol L-1 s-1 is the answer
Solution
mol L-1 s-1 is the answer.
According to the seriousness level, the following organs areThymu.pdf
empirical formula of C2H4 is CH2 empirical formula mass = 12+2 = 14
Solution
empirical formula of C2H4 is CH2 empirical formula mass = 12+2 = 14.
Among 40 subjects randomly choose 20 subjects and assign themSol.pdf
First substance = Ionic solid Second substance = Covalent solid
Solution
First substance = Ionic solid Second substance = Covalent solid.
AdvantagesThe main objective of business combination is to elimina.pdf
ex-1-enol: CH3 - CH2 - CH2 - CH2 - CH2 = CH2-OH hexanal CH3 - CH2 - CH2 -
CH2 - CH2 - CH2=O
Solution
ex-1-enol: CH3 - CH2 - CH2 - CH2 - CH2 = CH2-OH hexanal CH3 - CH2 - CH2 -
CH2 - CH2 - CH2=O.
a. Germ cell speciication in Drosophila is primarily a maternlly con.pdf
coordination no is the no of ligands in the coordination sphere and in this case it is 6
Solution
coordination no is the no of ligands in the coordination sphere and in this case it is 6.
Recommended
H2SO4 may act as 1) an acidexample 2NaOH + H2SO4 - Na2SO4 +.pdf
to minimise the length, term with \'m\' should be reduced so first to absolute values
must be opened with negative sign S2 = -4m+1 - 5m+6 + 10m-3 S2 = m+4
Solution
to minimise the length, term with \'m\' should be reduced so first to absolute values
must be opened with negative sign S2 = -4m+1 - 5m+6 + 10m-3 S2 = m+4.
Computer graphics are pictures and movies produced use computers fre.pdf
no. of sand grains in 1 truck = 10/0.1 x 10 ^-6=10^8 sand grains total time taken=
(10 X 6.02x10^23 x 10 )/10^8= 6.02 x 10^17 min= 6.872 x 10^ 13 years
Solution
no. of sand grains in 1 truck = 10/0.1 x 10 ^-6=10^8 sand grains total time taken=
(10 X 6.02x10^23 x 10 )/10^8= 6.02 x 10^17 min= 6.872 x 10^ 13 years.
Circle.javaimport java.text.DecimalFormat;public class Circle {.pdf
NaCl - sodium chloride MgO - magnesium oxide AgI - silver iodiode check its not
L CuSO4 - copper sulphate
Solution
NaCl - sodium chloride MgO - magnesium oxide AgI - silver iodiode check its not
L CuSO4 - copper sulphate.
C is correct. Only the host that the unicast message is addressed to.pdf
mol L-1 s-1 is the answer
Solution
mol L-1 s-1 is the answer.
According to the seriousness level, the following organs areThymu.pdf
empirical formula of C2H4 is CH2 empirical formula mass = 12+2 = 14
Solution
empirical formula of C2H4 is CH2 empirical formula mass = 12+2 = 14.
Among 40 subjects randomly choose 20 subjects and assign themSol.pdf
First substance = Ionic solid Second substance = Covalent solid
Solution
First substance = Ionic solid Second substance = Covalent solid.
AdvantagesThe main objective of business combination is to elimina.pdf
ex-1-enol: CH3 - CH2 - CH2 - CH2 - CH2 = CH2-OH hexanal CH3 - CH2 - CH2 -
CH2 - CH2 - CH2=O
Solution
ex-1-enol: CH3 - CH2 - CH2 - CH2 - CH2 = CH2-OH hexanal CH3 - CH2 - CH2 -
CH2 - CH2 - CH2=O.
a. Germ cell speciication in Drosophila is primarily a maternlly con.pdf
coordination no is the no of ligands in the coordination sphere and in this case it is 6
Solution
coordination no is the no of ligands in the coordination sphere and in this case it is 6.
A is correct. The packets to be filtered would be heading into the r.pdf
At the beginning of the 11th year, there would be 1,024,000 rabbits.
Solution
At the beginning of the 11th year, there would be 1,024,000 rabbits..
17-The Y-Chromosome DNA testing helps in the examination of the male.pdf
17-The Y-Chromosome DNA testing helps in the examination of the male specific portion of the
biological evidence. This is useful where small amount of male DNA is found amidst a large
amount of female DNA , as in the sexual assault cases.It can also help in the missing person
investigation as it extends the range of potential reference samples. Sine the Y chromosome is
passed on from the fathers to their sone (unchanged, except in the case of some mutations),
therefore all the males of the same paternal lineage will possess common Y chromosome
haplotype.
A set of Short tandem repeats (STR) are found on the male specific Y chromosome.The coding
genes found on the short arm of the Ychromosome are vital to male sex determination,
spermatogenesis andother male related functions. The Y-STRs are polymorphic among the
nonrelated males.
Sometimes when sepoarating the mal ecomponent and the female component becomes difficult,
then the YSTRs help in the determination. Since The Y-STRs are not present in the females,
therefore in a case where the male and female are involved, it becomes clear that as the Y-STRs
are present the male component is easily detected as only this part will be amplified in the PCR.
The YSTRs are also helpful when a number of males are involved. As regular STRs cause
masking effect the YSTR will help to identify all the males who have contributed to the
evidence.
ADVANTAGES-
1. extremely discriminating.
2. Extremely sensitive.e. low amounts of DNA can be used for determination.
3. Not onlu body fluids, but alsp touched materials or handled surfaces, where skinn cells ahev
been left can be used for DNA profiling.
4. Multiple testing systems ar available, which increases the likelyhood of successfully
generating DNA profiles.
5. Apart from standart=d STR enem mt DNA or YSTRs are used for profiling.
6. With the presence of the current technologies, from amidst mixed DNA samples, the DNA of
a particular individual can be profiled.
LIMITATIONS
1. Random match probability cannot be excluded.
2. Sometimes even when crime is not committed, we do get ,low levels of DNA on surfaces.
3.The important question while dealing with low DNA quantity is that whether the DNA that
was deposited was deposited during the crime or at some other time.
4.Searching evidence is challenging.
5.Sometimes finding the evidence is altogether impossibl.
6. In case of mtDNA /T STRs , as they are passed on from generation to generation either from
fathers to sons or mothers to daughters and son, therefore sometimes unrelated persons are also
share the same profile.
7. DNA mixtures are very complex.
8.Interpretation is required in many cases.
16- from Cyanobacterial to humans, many terristrial organisms have acquired the circadian
rhythms to adapt to sunlight to increase their survival rate.Circadian Rhythm is a biological clock
that displays an endogenous, entrainable oscillation of 24 hours.Thesse oscillations are driven by
circadian clocks.
PULSE CHASE EXPERIME.
#includestdio.h#includestring.h#includestdlib.h#define M.pdf
#include
#include
#include
#define MAX_STR_LEN 80
//decalring the structure
struct link_node
{
//declaring the variables
char node_str[ MAX_STR_LEN ];
struct link_node *next;
};
//method declaration
typedef struct link_node link_node;
struct link_node *add_node( struct link_node *list,struct link_node *node );
int compare_node( struct link_node *n1, struct link_node *n2 );
void display_list( struct link_node *head );
//implementing the method main
int main()
{
//declaring the main variables
link_node * head=NULL,*temp;
char str[MAX_STR_LEN];
do
{
//getting the STRING input
printf(\"Enter the string : \");
gets(str);
//malloc() is implemented for memory
temp=(link_node*)malloc(sizeof(link_node));
temp->next=NULL;
strcpy(temp->node_str,str);
head=add_node(head,temp);
}while(strlen(str)>1);
display_list(head);
return 0;
}
//method definition for compare node
int compare_node( struct link_node *n1, struct link_node *n2 )
{
if(strcmp(n1->node_str,n2->node_str)==0)
return 0;
if(strcmp(n1->node_str,n2->node_str)<0)
return -1;
else
return 1;
}
//method definition for adding the node
struct link_node *add_node( struct link_node *list,struct link_node *node )
{
link_node *temp=list;
if(list==NULL)
{
return node;
}
if(compare_node(node,list)==-1)
{
node->next=list;
list=node;
return list;
}
else
{
link_node *prev=list;
while(temp!=NULL&&compare_node(node,temp)>=0)
{
prev=temp;
temp=temp->next;
}
prev->next=node;
node->next=temp;
return list;
}
}
//method definition for displaying the list
void display_list( struct link_node *head )
{
link_node *temp;
while(head)
{
printf(\"%s\ \",head->node_str);
temp=head;
head=head->next;
free(temp);
}
}
Sample output:
Enter the string:
Geneva
America
Solution
#include
#include
#include
#define MAX_STR_LEN 80
//decalring the structure
struct link_node
{
//declaring the variables
char node_str[ MAX_STR_LEN ];
struct link_node *next;
};
//method declaration
typedef struct link_node link_node;
struct link_node *add_node( struct link_node *list,struct link_node *node );
int compare_node( struct link_node *n1, struct link_node *n2 );
void display_list( struct link_node *head );
//implementing the method main
int main()
{
//declaring the main variables
link_node * head=NULL,*temp;
char str[MAX_STR_LEN];
do
{
//getting the STRING input
printf(\"Enter the string : \");
gets(str);
//malloc() is implemented for memory
temp=(link_node*)malloc(sizeof(link_node));
temp->next=NULL;
strcpy(temp->node_str,str);
head=add_node(head,temp);
}while(strlen(str)>1);
display_list(head);
return 0;
}
//method definition for compare node
int compare_node( struct link_node *n1, struct link_node *n2 )
{
if(strcmp(n1->node_str,n2->node_str)==0)
return 0;
if(strcmp(n1->node_str,n2->node_str)<0)
return -1;
else
return 1;
}
//method definition for adding the node
struct link_node *add_node( struct link_node *list,struct link_node *node )
{
link_node *temp=list;
if(list==NULL)
{
return node;
}
if(compare_node(node,list)==-1)
{
node->next=list;
list=no.
The pH and pOH of a solution are defined as pH .pdf
The pH and pOH of a solution are defined as: pH = -log[H+] pOH = -log[OH-]
and pH + pOH = 14.00 [H+] = 0.055 Conversions: [OH-] = 1.00 x 10^-14 / [H+] = 1.00 x 10-14
/0.055= 1.8x10^-13 pOH = -log[OH-]=12.74
Solution
The pH and pOH of a solution are defined as: pH = -log[H+] pOH = -log[OH-]
and pH + pOH = 14.00 [H+] = 0.055 Conversions: [OH-] = 1.00 x 10^-14 / [H+] = 1.00 x 10-14
/0.055= 1.8x10^-13 pOH = -log[OH-]=12.74.
goal_state = [1, 8, 7, 2, 0, 6, 3, 4, 5] #goal_state = [1, 0, 7, 2, .pdf
goal_state = [1, 8, 7, 2, 0, 6, 3, 4, 5] #goal_state = [1, 0, 7, 2, 8, 6, 3, 4, 5] import sys global
count def display_board( state ): #print \"-------------\" print \" %i %i %i \" %
(state[0], state[3], state[6]) #print \"-------------\" print \" %i %i %i \" % (state[1],
state[4], state[7]) #print \"-------------\" print \" %i %i %i \" % (state[2], state[5],
state[8]) #print \"-------------\" def move_up( state ): new_state = state[:] index =
new_state.index( 0 ) if index not in [0, 3, 6]: temp = new_state[index - 1]
new_state[index - 1] = new_state[index] new_state[index] = temp return
new_state else: return None def move_down( state ): new_state = state[:]
index = new_state.index( 0 ) if index not in [2, 5, 8]: temp = new_state[index + 1]
new_state[index + 1] = new_state[index] new_state[index] = temp
return new_state else: return None def move_left( state ): new_state = state[:]
index = new_state.index( 0 ) if index not in [0, 1, 2]: temp = new_state[index
- 3] new_state[index - 3] = new_state[index] new_state[index] = temp
return new_state else: return None def move_right( state ): new_state =
state[:] index = new_state.index( 0 ) if index not in [6, 7, 8]: temp =
new_state[index + 3] new_state[index + 3] = new_state[index]
new_state[index] = temp return new_state else: return None def
create_node( state, parent, operator, depth, cost ): return Node( state, parent, operator,
depth, cost ) def expand_node( node, nodes ): expanded_nodes = []
expanded_nodes.append( create_node( move_up( node.state ), node, \"u\", node.depth + 1, 0 ) )
expanded_nodes.append( create_node( move_down( node.state ), node, \"d\", node.depth + 1,
0 ) ) expanded_nodes.append( create_node( move_left( node.state ), node, \"l\", node.depth
+ 1, 0 ) ) expanded_nodes.append( create_node( move_right( node.state), node, \"r\",
node.depth + 1, 0 ) ) # Filter the list and remove the nodes that are impossible (move
function returned None) expanded_nodes = [node for node in expanded_nodes if node.state
!= None] #list comprehension! expanded_nodes = [node for node in expanded_nodes if
node not in nodes] #list comprehension! #expanded_nodes = [node for node in
expanded_nodes if node.state!= ((node.parent).parent).state] #list comprehension!
expanded_nodes1 = [] for node in expanded_nodes: temp=node
temp=temp.parent temp=temp.parent if temp==None:
expanded_nodes1.extend(expanded_nodes) break if node.state
!=temp.state: expanded_nodes1.append(node) return
expanded_nodes1 def bfs( start, goal ): nodes = [] count=0 # Create the queue
with the root node in it. nodes.append( create_node( start, None, None, 0, 0 ) ) while
True: # We\'ve run out of states, no solution. if len( nodes ) == 0:
return None # take the node from the front of the queue node = nodes.pop(0)
count=count+1 #display_board(node.state) # Append the move we made to
moves # if this node is the goal, return the moves it took to get here. if node.state
== goal: #display_board(node.state) moves = []
temp = node print cou.
7 steps are required as 9 is the 7th element and the search is line.pdf
7 steps are required as 9 is the 7th element and the search is linear
Solution
7 steps are required as 9 is the 7th element and the search is linear.
(D) the number of moles of hydroxide ion added and the number of mol.pdf
(D) the number of moles of hydroxide ion added and the number of moles of monoprotic acid
initially present
Solution
(D) the number of moles of hydroxide ion added and the number of moles of monoprotic acid
initially present.
Look for changes in oxidation numbers. These occ.pdf
Look for changes in oxidation numbers. These occur in reactions (c) and (e) only.
Thus, reactions (c) and (e) are REDOX reactions.
Solution
Look for changes in oxidation numbers. These occur in reactions (c) and (e) only.
Thus, reactions (c) and (e) are REDOX reactions..
Use Daltons Law of partial pressures. P(Total).pdf
Use Dalton\'s Law of partial pressures. P(Total)=P(H2)+P(H20) p(H2)=P(Total)-
P(H20) Look up the partial pressure of water at the given temperature. It comes out to be 0.0351
atm. P(H2)=1-0.0351 = 0.9649 atm
Solution
Use Dalton\'s Law of partial pressures. P(Total)=P(H2)+P(H20) p(H2)=P(Total)-
P(H20) Look up the partial pressure of water at the given temperature. It comes out to be 0.0351
atm. P(H2)=1-0.0351 = 0.9649 atm.
The Br was originally neutral, but picks up an ex.pdf
The Br was originally neutral, but picks up an extra electron from the N and
becomes Br-. The Br- leaves the molecule The O was originally negative, but gives up an
electron to form a double bond with C1 and becomes neutral. Leaving O=C=N-C as a neutral
molecule. Keeping the labeling of the two carbons it would be O=C1=N-C2. With the double
bonds on both sides of C1, the O, C1, N backbone is linear.
Solution
The Br was originally neutral, but picks up an extra electron from the N and
becomes Br-. The Br- leaves the molecule The O was originally negative, but gives up an
electron to form a double bond with C1 and becomes neutral. Leaving O=C=N-C as a neutral
molecule. Keeping the labeling of the two carbons it would be O=C1=N-C2. With the double
bonds on both sides of C1, the O, C1, N backbone is linear..
Step1 firstly balance the Phophorous atoms by mul.pdf
Step1 firstly balance the Phophorous atoms by multiplying Right hand side by 4
Step 2 now balance oxygen atoms by multiplying H2O by 6 Step3 P4O10 +6 H2O------->
4H3PO4
Solution
Step1 firstly balance the Phophorous atoms by multiplying Right hand side by 4
Step 2 now balance oxygen atoms by multiplying H2O by 6 Step3 P4O10 +6 H2O------->
4H3PO4.
Year 2000 is the period when the productivity growth rate was at min.pdf
Year 2000 is the period when the productivity growth rate was at minimum ie., 0.7. Degrowth
refers to those years where productivity growth rate was in negative. Minimum growth rate
refers to the minimum positive growth rate achieved.
Solution
Year 2000 is the period when the productivity growth rate was at minimum ie., 0.7. Degrowth
refers to those years where productivity growth rate was in negative. Minimum growth rate
refers to the minimum positive growth rate achieved..
You have tab characters in your text file which is making console to.pdf
You have tab characters in your text file which is making console to display following both lines
aligned at middle.
dress
across the porch as the
There are two ways of doing it.
Solution
You have tab characters in your text file which is making console to display following both lines
aligned at middle.
dress
across the porch as the
There are two ways of doing it..
the frequency of the allele I^A in this population-0.22the frequen.pdf
the frequency of the allele I^A in this population-0.22
the frequency of the allele I^B in this population-0.08
Solution
the frequency of the allele I^A in this population-0.22
the frequency of the allele I^B in this population-0.08.
The reaction isSr(s) + 2 H2O(l) = Sr(OH)2(s) + H2(g)Solution.pdf
The reaction is:
Sr(s) + 2 H2O(l) => Sr(OH)2(s) + H2(g)
Solution
The reaction is:
Sr(s) + 2 H2O(l) => Sr(OH)2(s) + H2(g).
Solution!DOCTYPE html html head style type=textcss.pdf
Solution
IDENameCostOpen SourceDestinationNETBEANSFreeyescross platform IDEINTELLIJ
IDEA$199noit has great moderen UIECLIPSEfreeyesit features huge library of
pluginsJDEVELOPERfreeyesit has fully loades tool set for creating javaDR. JAVAFreeyesit
supports cross platformBLUEJFreeyesit suitable for small software projectsJCREATORfreeyesit
is fast and efficient ideJGRASPfreeyesit is super lightweight ideGREENFOOTfreeyesit supports
designing for 2D games CODEENVY$1(month)nocloud based ide.
TCPIP is mostly uaed network protocol in Linux and Mac os.But app.pdf
TCP/IP is mostly uaed network protocol in Linux and Mac os.
But appletalk also used in both the os.
Solution
TCP/IP is mostly uaed network protocol in Linux and Mac os.
But appletalk also used in both the os..
Synthetic Fiber Construction in lab .pptx
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Unit 2- Research Aptitude (UGC NET Paper I).pdf
This slide describes the research aptitude of unit 2 in the UGC NET paper I.
More Related Content
More from ANJALIENTERPRISES1
A is correct. The packets to be filtered would be heading into the r.pdf
At the beginning of the 11th year, there would be 1,024,000 rabbits.
Solution
At the beginning of the 11th year, there would be 1,024,000 rabbits..
17-The Y-Chromosome DNA testing helps in the examination of the male.pdf
17-The Y-Chromosome DNA testing helps in the examination of the male specific portion of the
biological evidence. This is useful where small amount of male DNA is found amidst a large
amount of female DNA , as in the sexual assault cases.It can also help in the missing person
investigation as it extends the range of potential reference samples. Sine the Y chromosome is
passed on from the fathers to their sone (unchanged, except in the case of some mutations),
therefore all the males of the same paternal lineage will possess common Y chromosome
haplotype.
A set of Short tandem repeats (STR) are found on the male specific Y chromosome.The coding
genes found on the short arm of the Ychromosome are vital to male sex determination,
spermatogenesis andother male related functions. The Y-STRs are polymorphic among the
nonrelated males.
Sometimes when sepoarating the mal ecomponent and the female component becomes difficult,
then the YSTRs help in the determination. Since The Y-STRs are not present in the females,
therefore in a case where the male and female are involved, it becomes clear that as the Y-STRs
are present the male component is easily detected as only this part will be amplified in the PCR.
The YSTRs are also helpful when a number of males are involved. As regular STRs cause
masking effect the YSTR will help to identify all the males who have contributed to the
evidence.
ADVANTAGES-
1. extremely discriminating.
2. Extremely sensitive.e. low amounts of DNA can be used for determination.
3. Not onlu body fluids, but alsp touched materials or handled surfaces, where skinn cells ahev
been left can be used for DNA profiling.
4. Multiple testing systems ar available, which increases the likelyhood of successfully
generating DNA profiles.
5. Apart from standart=d STR enem mt DNA or YSTRs are used for profiling.
6. With the presence of the current technologies, from amidst mixed DNA samples, the DNA of
a particular individual can be profiled.
LIMITATIONS
1. Random match probability cannot be excluded.
2. Sometimes even when crime is not committed, we do get ,low levels of DNA on surfaces.
3.The important question while dealing with low DNA quantity is that whether the DNA that
was deposited was deposited during the crime or at some other time.
4.Searching evidence is challenging.
5.Sometimes finding the evidence is altogether impossibl.
6. In case of mtDNA /T STRs , as they are passed on from generation to generation either from
fathers to sons or mothers to daughters and son, therefore sometimes unrelated persons are also
share the same profile.
7. DNA mixtures are very complex.
8.Interpretation is required in many cases.
16- from Cyanobacterial to humans, many terristrial organisms have acquired the circadian
rhythms to adapt to sunlight to increase their survival rate.Circadian Rhythm is a biological clock
that displays an endogenous, entrainable oscillation of 24 hours.Thesse oscillations are driven by
circadian clocks.
PULSE CHASE EXPERIME.
#includestdio.h#includestring.h#includestdlib.h#define M.pdf
#include
#include
#include
#define MAX_STR_LEN 80
//decalring the structure
struct link_node
{
//declaring the variables
char node_str[ MAX_STR_LEN ];
struct link_node *next;
};
//method declaration
typedef struct link_node link_node;
struct link_node *add_node( struct link_node *list,struct link_node *node );
int compare_node( struct link_node *n1, struct link_node *n2 );
void display_list( struct link_node *head );
//implementing the method main
int main()
{
//declaring the main variables
link_node * head=NULL,*temp;
char str[MAX_STR_LEN];
do
{
//getting the STRING input
printf(\"Enter the string : \");
gets(str);
//malloc() is implemented for memory
temp=(link_node*)malloc(sizeof(link_node));
temp->next=NULL;
strcpy(temp->node_str,str);
head=add_node(head,temp);
}while(strlen(str)>1);
display_list(head);
return 0;
}
//method definition for compare node
int compare_node( struct link_node *n1, struct link_node *n2 )
{
if(strcmp(n1->node_str,n2->node_str)==0)
return 0;
if(strcmp(n1->node_str,n2->node_str)<0)
return -1;
else
return 1;
}
//method definition for adding the node
struct link_node *add_node( struct link_node *list,struct link_node *node )
{
link_node *temp=list;
if(list==NULL)
{
return node;
}
if(compare_node(node,list)==-1)
{
node->next=list;
list=node;
return list;
}
else
{
link_node *prev=list;
while(temp!=NULL&&compare_node(node,temp)>=0)
{
prev=temp;
temp=temp->next;
}
prev->next=node;
node->next=temp;
return list;
}
}
//method definition for displaying the list
void display_list( struct link_node *head )
{
link_node *temp;
while(head)
{
printf(\"%s\ \",head->node_str);
temp=head;
head=head->next;
free(temp);
}
}
Sample output:
Enter the string:
Geneva
America
Solution
#include
#include
#include
#define MAX_STR_LEN 80
//decalring the structure
struct link_node
{
//declaring the variables
char node_str[ MAX_STR_LEN ];
struct link_node *next;
};
//method declaration
typedef struct link_node link_node;
struct link_node *add_node( struct link_node *list,struct link_node *node );
int compare_node( struct link_node *n1, struct link_node *n2 );
void display_list( struct link_node *head );
//implementing the method main
int main()
{
//declaring the main variables
link_node * head=NULL,*temp;
char str[MAX_STR_LEN];
do
{
//getting the STRING input
printf(\"Enter the string : \");
gets(str);
//malloc() is implemented for memory
temp=(link_node*)malloc(sizeof(link_node));
temp->next=NULL;
strcpy(temp->node_str,str);
head=add_node(head,temp);
}while(strlen(str)>1);
display_list(head);
return 0;
}
//method definition for compare node
int compare_node( struct link_node *n1, struct link_node *n2 )
{
if(strcmp(n1->node_str,n2->node_str)==0)
return 0;
if(strcmp(n1->node_str,n2->node_str)<0)
return -1;
else
return 1;
}
//method definition for adding the node
struct link_node *add_node( struct link_node *list,struct link_node *node )
{
link_node *temp=list;
if(list==NULL)
{
return node;
}
if(compare_node(node,list)==-1)
{
node->next=list;
list=no.
The pH and pOH of a solution are defined as pH .pdf
The pH and pOH of a solution are defined as: pH = -log[H+] pOH = -log[OH-]
and pH + pOH = 14.00 [H+] = 0.055 Conversions: [OH-] = 1.00 x 10^-14 / [H+] = 1.00 x 10-14
/0.055= 1.8x10^-13 pOH = -log[OH-]=12.74
Solution
The pH and pOH of a solution are defined as: pH = -log[H+] pOH = -log[OH-]
and pH + pOH = 14.00 [H+] = 0.055 Conversions: [OH-] = 1.00 x 10^-14 / [H+] = 1.00 x 10-14
/0.055= 1.8x10^-13 pOH = -log[OH-]=12.74.
goal_state = [1, 8, 7, 2, 0, 6, 3, 4, 5] #goal_state = [1, 0, 7, 2, .pdf
goal_state = [1, 8, 7, 2, 0, 6, 3, 4, 5] #goal_state = [1, 0, 7, 2, 8, 6, 3, 4, 5] import sys global
count def display_board( state ): #print \"-------------\" print \" %i %i %i \" %
(state[0], state[3], state[6]) #print \"-------------\" print \" %i %i %i \" % (state[1],
state[4], state[7]) #print \"-------------\" print \" %i %i %i \" % (state[2], state[5],
state[8]) #print \"-------------\" def move_up( state ): new_state = state[:] index =
new_state.index( 0 ) if index not in [0, 3, 6]: temp = new_state[index - 1]
new_state[index - 1] = new_state[index] new_state[index] = temp return
new_state else: return None def move_down( state ): new_state = state[:]
index = new_state.index( 0 ) if index not in [2, 5, 8]: temp = new_state[index + 1]
new_state[index + 1] = new_state[index] new_state[index] = temp
return new_state else: return None def move_left( state ): new_state = state[:]
index = new_state.index( 0 ) if index not in [0, 1, 2]: temp = new_state[index
- 3] new_state[index - 3] = new_state[index] new_state[index] = temp
return new_state else: return None def move_right( state ): new_state =
state[:] index = new_state.index( 0 ) if index not in [6, 7, 8]: temp =
new_state[index + 3] new_state[index + 3] = new_state[index]
new_state[index] = temp return new_state else: return None def
create_node( state, parent, operator, depth, cost ): return Node( state, parent, operator,
depth, cost ) def expand_node( node, nodes ): expanded_nodes = []
expanded_nodes.append( create_node( move_up( node.state ), node, \"u\", node.depth + 1, 0 ) )
expanded_nodes.append( create_node( move_down( node.state ), node, \"d\", node.depth + 1,
0 ) ) expanded_nodes.append( create_node( move_left( node.state ), node, \"l\", node.depth
+ 1, 0 ) ) expanded_nodes.append( create_node( move_right( node.state), node, \"r\",
node.depth + 1, 0 ) ) # Filter the list and remove the nodes that are impossible (move
function returned None) expanded_nodes = [node for node in expanded_nodes if node.state
!= None] #list comprehension! expanded_nodes = [node for node in expanded_nodes if
node not in nodes] #list comprehension! #expanded_nodes = [node for node in
expanded_nodes if node.state!= ((node.parent).parent).state] #list comprehension!
expanded_nodes1 = [] for node in expanded_nodes: temp=node
temp=temp.parent temp=temp.parent if temp==None:
expanded_nodes1.extend(expanded_nodes) break if node.state
!=temp.state: expanded_nodes1.append(node) return
expanded_nodes1 def bfs( start, goal ): nodes = [] count=0 # Create the queue
with the root node in it. nodes.append( create_node( start, None, None, 0, 0 ) ) while
True: # We\'ve run out of states, no solution. if len( nodes ) == 0:
return None # take the node from the front of the queue node = nodes.pop(0)
count=count+1 #display_board(node.state) # Append the move we made to
moves # if this node is the goal, return the moves it took to get here. if node.state
== goal: #display_board(node.state) moves = []
temp = node print cou.
7 steps are required as 9 is the 7th element and the search is line.pdf
7 steps are required as 9 is the 7th element and the search is linear
Solution
7 steps are required as 9 is the 7th element and the search is linear.
(D) the number of moles of hydroxide ion added and the number of mol.pdf
(D) the number of moles of hydroxide ion added and the number of moles of monoprotic acid
initially present
Solution
(D) the number of moles of hydroxide ion added and the number of moles of monoprotic acid
initially present.
Look for changes in oxidation numbers. These occ.pdf
Look for changes in oxidation numbers. These occur in reactions (c) and (e) only.
Thus, reactions (c) and (e) are REDOX reactions.
Solution
Look for changes in oxidation numbers. These occur in reactions (c) and (e) only.
Thus, reactions (c) and (e) are REDOX reactions..
Use Daltons Law of partial pressures. P(Total).pdf
Use Dalton\'s Law of partial pressures. P(Total)=P(H2)+P(H20) p(H2)=P(Total)-
P(H20) Look up the partial pressure of water at the given temperature. It comes out to be 0.0351
atm. P(H2)=1-0.0351 = 0.9649 atm
Solution
Use Dalton\'s Law of partial pressures. P(Total)=P(H2)+P(H20) p(H2)=P(Total)-
P(H20) Look up the partial pressure of water at the given temperature. It comes out to be 0.0351
atm. P(H2)=1-0.0351 = 0.9649 atm.
The Br was originally neutral, but picks up an ex.pdf
The Br was originally neutral, but picks up an extra electron from the N and
becomes Br-. The Br- leaves the molecule The O was originally negative, but gives up an
electron to form a double bond with C1 and becomes neutral. Leaving O=C=N-C as a neutral
molecule. Keeping the labeling of the two carbons it would be O=C1=N-C2. With the double
bonds on both sides of C1, the O, C1, N backbone is linear.
Solution
The Br was originally neutral, but picks up an extra electron from the N and
becomes Br-. The Br- leaves the molecule The O was originally negative, but gives up an
electron to form a double bond with C1 and becomes neutral. Leaving O=C=N-C as a neutral
molecule. Keeping the labeling of the two carbons it would be O=C1=N-C2. With the double
bonds on both sides of C1, the O, C1, N backbone is linear..
Step1 firstly balance the Phophorous atoms by mul.pdf
Step1 firstly balance the Phophorous atoms by multiplying Right hand side by 4
Step 2 now balance oxygen atoms by multiplying H2O by 6 Step3 P4O10 +6 H2O------->
4H3PO4
Solution
Step1 firstly balance the Phophorous atoms by multiplying Right hand side by 4
Step 2 now balance oxygen atoms by multiplying H2O by 6 Step3 P4O10 +6 H2O------->
4H3PO4.
Year 2000 is the period when the productivity growth rate was at min.pdf
Year 2000 is the period when the productivity growth rate was at minimum ie., 0.7. Degrowth
refers to those years where productivity growth rate was in negative. Minimum growth rate
refers to the minimum positive growth rate achieved.
Solution
Year 2000 is the period when the productivity growth rate was at minimum ie., 0.7. Degrowth
refers to those years where productivity growth rate was in negative. Minimum growth rate
refers to the minimum positive growth rate achieved..
You have tab characters in your text file which is making console to.pdf
You have tab characters in your text file which is making console to display following both lines
aligned at middle.
dress
across the porch as the
There are two ways of doing it.
Solution
You have tab characters in your text file which is making console to display following both lines
aligned at middle.
dress
across the porch as the
There are two ways of doing it..
the frequency of the allele I^A in this population-0.22the frequen.pdf
the frequency of the allele I^A in this population-0.22
the frequency of the allele I^B in this population-0.08
Solution
the frequency of the allele I^A in this population-0.22
the frequency of the allele I^B in this population-0.08.
The reaction isSr(s) + 2 H2O(l) = Sr(OH)2(s) + H2(g)Solution.pdf
The reaction is:
Sr(s) + 2 H2O(l) => Sr(OH)2(s) + H2(g)
Solution
The reaction is:
Sr(s) + 2 H2O(l) => Sr(OH)2(s) + H2(g).
Solution!DOCTYPE html html head style type=textcss.pdf
Solution
IDENameCostOpen SourceDestinationNETBEANSFreeyescross platform IDEINTELLIJ
IDEA$199noit has great moderen UIECLIPSEfreeyesit features huge library of
pluginsJDEVELOPERfreeyesit has fully loades tool set for creating javaDR. JAVAFreeyesit
supports cross platformBLUEJFreeyesit suitable for small software projectsJCREATORfreeyesit
is fast and efficient ideJGRASPfreeyesit is super lightweight ideGREENFOOTfreeyesit supports
designing for 2D games CODEENVY$1(month)nocloud based ide.
TCPIP is mostly uaed network protocol in Linux and Mac os.But app.pdf
TCP/IP is mostly uaed network protocol in Linux and Mac os.
But appletalk also used in both the os.
Solution
TCP/IP is mostly uaed network protocol in Linux and Mac os.
But appletalk also used in both the os..
More from ANJALIENTERPRISES1 (20)
A is correct. The packets to be filtered would be heading into the r.pdf
A is correct. The packets to be filtered would be heading into the r.pdf
17-The Y-Chromosome DNA testing helps in the examination of the male.pdf
17-The Y-Chromosome DNA testing helps in the examination of the male.pdf
#includestdio.h#includestring.h#includestdlib.h#define M.pdf
#includestdio.h#includestring.h#includestdlib.h#define M.pdf
The pH and pOH of a solution are defined as pH .pdf
The pH and pOH of a solution are defined as pH .pdf
goal_state = [1, 8, 7, 2, 0, 6, 3, 4, 5] #goal_state = [1, 0, 7, 2, .pdf
goal_state = [1, 8, 7, 2, 0, 6, 3, 4, 5] #goal_state = [1, 0, 7, 2, .pdf
7 steps are required as 9 is the 7th element and the search is line.pdf
7 steps are required as 9 is the 7th element and the search is line.pdf
(D) the number of moles of hydroxide ion added and the number of mol.pdf
(D) the number of moles of hydroxide ion added and the number of mol.pdf
Look for changes in oxidation numbers. These occ.pdf
Look for changes in oxidation numbers. These occ.pdf
Use Daltons Law of partial pressures. P(Total).pdf
Use Daltons Law of partial pressures. P(Total).pdf
The Br was originally neutral, but picks up an ex.pdf
The Br was originally neutral, but picks up an ex.pdf
Step1 firstly balance the Phophorous atoms by mul.pdf
Step1 firstly balance the Phophorous atoms by mul.pdf
Year 2000 is the period when the productivity growth rate was at min.pdf
Year 2000 is the period when the productivity growth rate was at min.pdf
You have tab characters in your text file which is making console to.pdf
You have tab characters in your text file which is making console to.pdf
the frequency of the allele I^A in this population-0.22the frequen.pdf
the frequency of the allele I^A in this population-0.22the frequen.pdf
The reaction isSr(s) + 2 H2O(l) = Sr(OH)2(s) + H2(g)Solution.pdf
The reaction isSr(s) + 2 H2O(l) = Sr(OH)2(s) + H2(g)Solution.pdf
Solution!DOCTYPE html html head style type=textcss.pdf
Solution!DOCTYPE html html head style type=textcss.pdf
TCPIP is mostly uaed network protocol in Linux and Mac os.But app.pdf
TCPIP is mostly uaed network protocol in Linux and Mac os.But app.pdf
Recently uploaded
Synthetic Fiber Construction in lab .pptx
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Unit 2- Research Aptitude (UGC NET Paper I).pdf
This slide describes the research aptitude of unit 2 in the UGC NET paper I.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
How to Make a Field invisible in Odoo 17
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
678020731-Sumas-y-Restas-Para-Colorear.pdf
KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
CACJapan - GROUP Presentation 1- Wk 4.pdf
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
"Protectable subject matters, Protection in biotechnology, Protection of othe...
Protectable subject matters, Protection in biotechnology, Protection of other biological materials, Ownership and period of protection
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH ANSWERS.
The geography of Taylor Swift - some ideas
Geographical themes connected with Taylor Swift's ERAS tour - coming to the UK in June 2024
The approach at University of Liverpool.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...Nguyen Thanh Tu Collection
https://app.box.com/s/hqnndn05v4q5a4k4jd597rkdbda0fniiCLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
Class 11 CBSE Business Studies Project ( AIDS TO TRADE - INSURANCE)
The French Revolution Class 9 Study Material pdf free download
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Chapter 3 - Islamic Banking Products and Services.pptx
Chapter 3 - Islamic Banking Products and Services.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is prepared for master's students (MIFB & MIBS) UUM. May it be useful to all.Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Event Link:-
https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-exploring-gemini-ai-and-integration-with-mulesoft/
Agenda
● Java 17 Upgrade Overview
● Why and by when do customers need to upgrade to Java 17?
● Is there any immediate impact to upgrading to Mule Runtime 4.6 and beyond?
● Which MuleSoft products are in scope?
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/
YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Shyam Raj Prasad-
https://www.linkedin.com/in/shyam-raj-prasad/
Recently uploaded (20)
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
"Protectable subject matters, Protection in biotechnology, Protection of othe...
"Protectable subject matters, Protection in biotechnology, Protection of othe...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
The French Revolution Class 9 Study Material pdf free download
The French Revolution Class 9 Study Material pdf free download
Chapter 3 - Islamic Banking Products and Services.pptx
Chapter 3 - Islamic Banking Products and Services.pptx
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Adversarial Attention Modeling for Multi-dimensional Emotion Regression.pdf
Adversarial Attention Modeling for Multi-dimensional Emotion Regression.pdf
1). A) ipsilateralBelow the point of spinal cord, the nerve paths .pdf
- 1. 1). A) ipsilateral Below the point of spinal cord, the nerve paths belong to the same side (no crossing over occurs). So, the nociceptive information can be found on the same side of the body. Solution 1). A) ipsilateral Below the point of spinal cord, the nerve paths belong to the same side (no crossing over occurs). So, the nociceptive information can be found on the same side of the body.