02 led-7 w-cylinder
•
0 likes•14 views
This document provides specifications for LED light bulbs, including available sockets like GU10, E27, and E14 that can accommodate voltages from 90 to 260VAC. The bulbs have a working temperature range of -20 to 40 degrees Celsius, an expected life of around 50,000 hours, and size of 97.5mm x 31.5mm. They provide energy savings of around 80% compared to incandescent bulbs and put out 600-650 lumens depending on the color temperature, with a 360 degree beam angle. The bulbs are RoHS compliant, mercury-free, and CE certified.
Report
Share
Report
Share
Download to read offline
Recommended
02 led-16 w-cylinder
This document provides specifications for an LED light bulb, including available sockets like GU10, E27, and E14 that can accommodate voltages from 90 to 260VAC. It lists technical details such as a working temperature range of -20 to 40 degrees Celsius, a life expectancy of around 50,000 hours, and dimensions of 120mm by 31.5mm diameter. The bulb has a 360 degree beam angle and can save around 80% in energy while providing 1200 lumens for warm white at 3000K and 1300 lumens for cool white at 6000K. It is RoHS compliant, mercury free, and CE certified.
02 led-15 w-cylinder
This document provides specifications for an LED light bulb, including available sockets like GU10, E27, and E14 that can accommodate voltages from 90 to 260VAC. It lists technical details such as a working temperature range of -20 to 40 degrees Celsius, a life expectancy of around 50,000 hours, and dimensions of 120mm by 50mm diameter. Additionally, it notes the bulb has a 360 degree beam angle and can save around 80% in energy while providing luminosity of 1050 lumens for a 3000K bulb or 1100 lumens for a 6000K bulb.
04 led-7 w-spot
This document provides technical specifications for LED light bulbs, including available sockets like GU10, E27, and E14 that can accommodate voltages from 90 to 260VAC. It lists lumen outputs of around 560 lumens at 3000K and 630 lumens at 6000K, an IP44 rating suitable for outdoor use, a lifespan of around 50,000 hours, and efficiency savings of around 90% compared to traditional bulbs. The bulbs use COB LEDs, are RoHS compliant without mercury, and have a color rendering index of 75.
04 led-5 w-60-spot
This document provides technical specifications for LED light bulbs including available sockets like GU10, E27, and E14 that operate from 90-260VAC, and MR16 at 12VDC. It lists beam angle as 60 degrees and energy savings of around 90% compared to incandescent bulbs. Luminosity levels are provided for 3000K and 6000K bulb temperatures, and additional details are given on IP rating, lumens, certifications, lifespan, and operating temperature range.
04 led-5 w-38-spot
This document provides technical specifications for LED light bulbs including available sockets like GU10, E27, and E14 that operate from 90-260VAC, and MR16 at 12VDC. It lists beam angle at 38 degrees and energy savings of around 90% compared to incandescent bulbs. Luminosity levels are provided for 3000K and 6000K bulb temperatures, and additional details are given on IP rating, lumens, certifications, lifespan, and operating temperature range.
04 led-5 w-spot
This document provides technical specifications for LED light bulbs sold by Mohammed F. Al-Shahri Est., including available sockets and voltages for GU10, E27, and E14 bulbs as well as MR16 bulbs that operate using 12VDC. It lists the beam angle as 120 degrees and energy savings of around 90% compared to traditional bulbs. Luminosity and color temperature ratings are provided for 3000K and 6000K bulbs, and it notes the bulbs are IP44 rated, RoHS compliant without mercury, CE certified, and have a long life expectancy of 50,000 hours with low heat dissipation and a working temperature range of -20 to 50 degrees Celsius.
04 led-3×1 w-spot
This document provides technical specifications for LED light bulbs sold by Mohammed F. Al-Shahri Est., including available sockets and voltages, beam angles, energy savings, luminosity at different color temperatures, indoor applications, certifications, lifespan, working temperature range, color accuracy, and a brief slogan.
04 led-3 w-spot
This document provides technical specifications for LED light bulbs sold by Mohammed F. Al-Shahri Est., including available sockets like GU10, E27, and E14 that operate from 90-260VAC, as well as MR16 bulbs that operate at 12VDC. It lists lumen outputs of around 240-270 lumens depending on color temperature, an IP44 rating suitable for outdoor use, a lifespan of around 50,000 hours, and energy savings of approximately 90% compared to traditional bulbs.
Recommended
02 led-16 w-cylinder
This document provides specifications for an LED light bulb, including available sockets like GU10, E27, and E14 that can accommodate voltages from 90 to 260VAC. It lists technical details such as a working temperature range of -20 to 40 degrees Celsius, a life expectancy of around 50,000 hours, and dimensions of 120mm by 31.5mm diameter. The bulb has a 360 degree beam angle and can save around 80% in energy while providing 1200 lumens for warm white at 3000K and 1300 lumens for cool white at 6000K. It is RoHS compliant, mercury free, and CE certified.
02 led-15 w-cylinder
This document provides specifications for an LED light bulb, including available sockets like GU10, E27, and E14 that can accommodate voltages from 90 to 260VAC. It lists technical details such as a working temperature range of -20 to 40 degrees Celsius, a life expectancy of around 50,000 hours, and dimensions of 120mm by 50mm diameter. Additionally, it notes the bulb has a 360 degree beam angle and can save around 80% in energy while providing luminosity of 1050 lumens for a 3000K bulb or 1100 lumens for a 6000K bulb.
04 led-7 w-spot
This document provides technical specifications for LED light bulbs, including available sockets like GU10, E27, and E14 that can accommodate voltages from 90 to 260VAC. It lists lumen outputs of around 560 lumens at 3000K and 630 lumens at 6000K, an IP44 rating suitable for outdoor use, a lifespan of around 50,000 hours, and efficiency savings of around 90% compared to traditional bulbs. The bulbs use COB LEDs, are RoHS compliant without mercury, and have a color rendering index of 75.
04 led-5 w-60-spot
This document provides technical specifications for LED light bulbs including available sockets like GU10, E27, and E14 that operate from 90-260VAC, and MR16 at 12VDC. It lists beam angle as 60 degrees and energy savings of around 90% compared to incandescent bulbs. Luminosity levels are provided for 3000K and 6000K bulb temperatures, and additional details are given on IP rating, lumens, certifications, lifespan, and operating temperature range.
04 led-5 w-38-spot
This document provides technical specifications for LED light bulbs including available sockets like GU10, E27, and E14 that operate from 90-260VAC, and MR16 at 12VDC. It lists beam angle at 38 degrees and energy savings of around 90% compared to incandescent bulbs. Luminosity levels are provided for 3000K and 6000K bulb temperatures, and additional details are given on IP rating, lumens, certifications, lifespan, and operating temperature range.
04 led-5 w-spot
This document provides technical specifications for LED light bulbs sold by Mohammed F. Al-Shahri Est., including available sockets and voltages for GU10, E27, and E14 bulbs as well as MR16 bulbs that operate using 12VDC. It lists the beam angle as 120 degrees and energy savings of around 90% compared to traditional bulbs. Luminosity and color temperature ratings are provided for 3000K and 6000K bulbs, and it notes the bulbs are IP44 rated, RoHS compliant without mercury, CE certified, and have a long life expectancy of 50,000 hours with low heat dissipation and a working temperature range of -20 to 50 degrees Celsius.
04 led-3×1 w-spot
This document provides technical specifications for LED light bulbs sold by Mohammed F. Al-Shahri Est., including available sockets and voltages, beam angles, energy savings, luminosity at different color temperatures, indoor applications, certifications, lifespan, working temperature range, color accuracy, and a brief slogan.
04 led-3 w-spot
This document provides technical specifications for LED light bulbs sold by Mohammed F. Al-Shahri Est., including available sockets like GU10, E27, and E14 that operate from 90-260VAC, as well as MR16 bulbs that operate at 12VDC. It lists lumen outputs of around 240-270 lumens depending on color temperature, an IP44 rating suitable for outdoor use, a lifespan of around 50,000 hours, and energy savings of approximately 90% compared to traditional bulbs.
10 led-30 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x132mm with a required depth of 136mm and a beam angle of 80 degrees. It claims the fixture saves 70-80% energy and has a luminosity of 2350 lumens at 3000K or 2500 lumens at 6000K, while being RoHS compliant, CE certified, and having a lifespan of around 50,000 hours with low heat dissipation.
05 led-14 w-par38
E27 LED bulbs that provide 1120 lumens of light in warm white or cool white colors. They use 85% less energy than traditional bulbs, last 50,000 hours, have a wide temperature operating range, and are RoHS compliant, mercury-free, and CE certified for safety and quality.
06 led-7 w-opalbulb
E27 LED light bulbs that provide energy savings of around 90% compared to incandescent bulbs. They emit 550 lumens of bright white light at 6000K, last around 50,000 hours which is 15-25 years, and are suitable for use in homes, gardens, offices and malls. They are RoHS compliant, mercury-free, and CE certified.
T8 led tubes
The last stride preceding setting all the T8 LED Tubes is to put a sticker or mark on the plate. It demonstrates that the installation has been conformed to explicitly oblige LED tubes. This permits circuit testers who will replace the tubes later on to know which installations can be utilized for which specific tubes. Once an apparatus has been balanced for Driven, it can never again be utilized for fluorescent or different sorts of tubes. See to it that the name/sticker is on the focal point of the plate or whatever other place where it can without much of a stretch be spotted.
Adding a socket
Adding a socket or spur to an existing electrical circuit requires following certain rules to do so safely and legally. A spur can only be connected to an existing socket that does not already have a spur, with no more than one spur per socket. The number of spurs must not exceed the number of sockets. If more sockets are needed in a part of the home, another ring main or extension of an existing ring main is required. Any added spurs must use the same cable type and be properly protected within walls or conduits. Following the regulations is important as additional unauthorized circuitry could impact a future home sale or insurance validity. A qualified electrician should check any electrical work.
Circuit
The document discusses how electricity flows through a circuit. A circuit requires two sides connected by wires for electricity to flow. Turning a switch off cuts the connection in the switch and stops the flow of electricity, while turning it on reconnects the wires and allows electricity to power a light.
LED Batten_Lights
This document provides specifications for several LED batten light models. It describes the lights' heat dissipation system using aluminum housing and boards. It also mentions an anti-UV high efficiency polycarbonate cover from Japan and excellent, uniform light distribution. Installation is via clip-on brackets. Certifications include SAA, C-TICK, CE and RoHS. Additional details include lumen output, wattage, color temperature, beam angle, efficiency, lifespan, operating temperature range, and certifications. Packaging information and installation diagrams are also provided.
27 w corn lights fins
LED corn bulb,LED ceiling lights manufacturer and supplier, and we are to be China's prominent commercial lighting solutions company.
20 led-high bay lamp high end
This document provides information about LED lighting products from Mohammed F. Al-Shahri Est., including their voltage range, beam angle, energy savings of over 50%, suggested applications for warehouses and stores, certifications for RoHS, CE, and power factor and efficiency ratings. It also lists the working temperature range, color accuracy, protection level, and available sizes from 50W to 300W with lumen outputs ranging from 4500lm to 28000lm.
19 led-striplight controller
This document advertises remote dimmer and RGB lighting modules that are RoHS compliant, CE certified, and can control lighting up to 1000 meters away. The modules support green energy and contain no mercury. They allow for remote control of brightness and color with LED lights.
19 led-power supplies
This document describes a constant voltage power supply available from Mohammed F. Al-Shahri Est. It lists 9 available output sizes ranging from 12V 48W to 12V 360W and notes the power supply has a dual voltage input range of 90-140VAC and 170-250VAC at 50 or 60Hz. It also mentions several safety and certification features including power factor correction, being RoHS compliant and CE certified, and having short circuit and thermal overload protection.
18 led-5m-strip-lights
This document provides specifications for LED light strips of different types and wattages, including SMD 3528 and SMD 5050 strips that consume between 38W to 96W per 5 meters and contain 300 to 1200 LEDs. It lists the available LED chip types, colors, operating features, and notes that the strips support green energy, are RoHS compliant, CE certified, and have a life expectancy of around 30,000 hours. Power supplies and controllers must be ordered separately.
18 led-5m-dual-strip-lights
The document describes an LED light strip that contains 1200 LEDs per 5 meter section, consuming 96 watts of power. It uses SMD 3528 LED chips and is available in various colors like warm white, cool white, blue, green, red, and yellow. The light strip has a long life expectancy of around 30,000 hours and is dimmable and compatible with LED power supplies and controllers. It operates from 12VDC and is RoHS compliant, CE certified, and supports green energy applications.
16 led-240 w-street lamp
This document provides specifications for an LED street light that operates on 100-240VAC or 277VAC power. It has a beam angle of less than 120 degrees, saves approximately 55% energy, and produces 20,400 lumens of 6000K light from 8 high brightness 30W COB LEDs. Additional features include a power factor over 0.95, efficiency over 88%, a 50,000 hour life expectancy, an operating temperature range of -20 to 50 degrees Celsius, and an IP65 rating.
16 led-200 w-street lamp
The document describes an LED street light that has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, energy savings of around 55%, a brightness of 17,000 lumens at a color temperature of 6000K, a lifespan of 50,000 hours, an operating temperature range of -20 to 50 degrees Celsius, an IP65 rating for protection against dust and water, and is RoHS compliant, CE certified, and contains no mercury. It is suggested for use on highways, main roads, and city streets.
16 led-160 w-street lamp
The document summarizes the specifications of an LED street light that provides energy savings of around 55% compared to traditional lights. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, a luminosity of around 13,600 lumens at a color temperature of 6000K, a lifespan expectancy of over 50,000 hours, and an IP65 rating for protection against dust and water. The light supports green energy use and contains no mercury.
16 led-120 w-street lamp
This document provides specifications for an LED street light that uses 6 high-brightness COB LED chips. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, and can save around 55% energy. The light produces around 10,200 lumens at a color temperature of 6000K, and has an expected lifespan of over 50,000 hours with a power factor over 0.95 and efficiency above 88%.
16 led-080 w-street lamp
This document provides specifications for an LED street light that uses 4 high-brightness COB LEDs. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, and can save around 55% energy. The light produces around 6800 lumens at 6000K color temperature and has an expected life of over 50,000 hours with a power factor over 0.95 and efficiency above 88%. It is RoHS compliant, CE certified, and has an operating temperature range of -20 to 50 degrees Celsius.
13 led-20 w-flood light
This document provides technical specifications for an LED light fixture, including a beam angle of 120-150 degrees, energy savings of 60-70% compared to other lights, luminosities of 1600 lumens at 3000K and 1800 lumens at 6000K, support for green energy as it is RoHS compliant and contains no mercury, a lifespan of around 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, a power factor of at least 0.9, frame dimensions of 140x180mm, a wide input voltage range of 100-250VAC at 50/60Hz frequency, and a slogan about the future brightness shining with LED.
12 led-6 8-10_w-wall lamp
This document describes an LED light that can save up to 80% in energy costs. It has a color temperature of 3200K, is RoHS compliant without mercury, CE certified, and has a high power LED with a lifespan of around 50,000 hours. The light has a color rendering index over 80, power factor above 0.9, and works with an input voltage range of 100-250VAC at 50/60Hz. It has a safe product voltage of 12V.
11 led-30 w-ceiling pendent lamp
The document describes an LED light fixture that provides energy savings of up to 80% compared to traditional lighting. It has a color temperature of 3200K, contains no mercury or hazardous materials, and is RoHS and CE certified. The high-power LED light has an expected lifespan of around 50,000 hours and a color accuracy rating over 80.
11 led-18 w-ceiling pendent lamp
EPACS-MFS is an LED lighting company that offers energy efficient lights that can save up to 80% in energy costs. Their high power LED lights have a color temperature of 3200K, CRI over 80, power factor above 0.9, and a lifespan of around 50,000 hours. The lights are RoHS compliant, CE certified, and operate safely at 12V with a wide input voltage range of 100-250VAC at 50/60Hz.
More Related Content
What's hot
10 led-30 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x132mm with a required depth of 136mm and a beam angle of 80 degrees. It claims the fixture saves 70-80% energy and has a luminosity of 2350 lumens at 3000K or 2500 lumens at 6000K, while being RoHS compliant, CE certified, and having a lifespan of around 50,000 hours with low heat dissipation.
05 led-14 w-par38
E27 LED bulbs that provide 1120 lumens of light in warm white or cool white colors. They use 85% less energy than traditional bulbs, last 50,000 hours, have a wide temperature operating range, and are RoHS compliant, mercury-free, and CE certified for safety and quality.
06 led-7 w-opalbulb
E27 LED light bulbs that provide energy savings of around 90% compared to incandescent bulbs. They emit 550 lumens of bright white light at 6000K, last around 50,000 hours which is 15-25 years, and are suitable for use in homes, gardens, offices and malls. They are RoHS compliant, mercury-free, and CE certified.
T8 led tubes
The last stride preceding setting all the T8 LED Tubes is to put a sticker or mark on the plate. It demonstrates that the installation has been conformed to explicitly oblige LED tubes. This permits circuit testers who will replace the tubes later on to know which installations can be utilized for which specific tubes. Once an apparatus has been balanced for Driven, it can never again be utilized for fluorescent or different sorts of tubes. See to it that the name/sticker is on the focal point of the plate or whatever other place where it can without much of a stretch be spotted.
Adding a socket
Adding a socket or spur to an existing electrical circuit requires following certain rules to do so safely and legally. A spur can only be connected to an existing socket that does not already have a spur, with no more than one spur per socket. The number of spurs must not exceed the number of sockets. If more sockets are needed in a part of the home, another ring main or extension of an existing ring main is required. Any added spurs must use the same cable type and be properly protected within walls or conduits. Following the regulations is important as additional unauthorized circuitry could impact a future home sale or insurance validity. A qualified electrician should check any electrical work.
Circuit
The document discusses how electricity flows through a circuit. A circuit requires two sides connected by wires for electricity to flow. Turning a switch off cuts the connection in the switch and stops the flow of electricity, while turning it on reconnects the wires and allows electricity to power a light.
LED Batten_Lights
This document provides specifications for several LED batten light models. It describes the lights' heat dissipation system using aluminum housing and boards. It also mentions an anti-UV high efficiency polycarbonate cover from Japan and excellent, uniform light distribution. Installation is via clip-on brackets. Certifications include SAA, C-TICK, CE and RoHS. Additional details include lumen output, wattage, color temperature, beam angle, efficiency, lifespan, operating temperature range, and certifications. Packaging information and installation diagrams are also provided.
27 w corn lights fins
LED corn bulb,LED ceiling lights manufacturer and supplier, and we are to be China's prominent commercial lighting solutions company.
What's hot (8)
More from EPACS ( Electrical Power and Control System )
20 led-high bay lamp high end
This document provides information about LED lighting products from Mohammed F. Al-Shahri Est., including their voltage range, beam angle, energy savings of over 50%, suggested applications for warehouses and stores, certifications for RoHS, CE, and power factor and efficiency ratings. It also lists the working temperature range, color accuracy, protection level, and available sizes from 50W to 300W with lumen outputs ranging from 4500lm to 28000lm.
19 led-striplight controller
This document advertises remote dimmer and RGB lighting modules that are RoHS compliant, CE certified, and can control lighting up to 1000 meters away. The modules support green energy and contain no mercury. They allow for remote control of brightness and color with LED lights.
19 led-power supplies
This document describes a constant voltage power supply available from Mohammed F. Al-Shahri Est. It lists 9 available output sizes ranging from 12V 48W to 12V 360W and notes the power supply has a dual voltage input range of 90-140VAC and 170-250VAC at 50 or 60Hz. It also mentions several safety and certification features including power factor correction, being RoHS compliant and CE certified, and having short circuit and thermal overload protection.
18 led-5m-strip-lights
This document provides specifications for LED light strips of different types and wattages, including SMD 3528 and SMD 5050 strips that consume between 38W to 96W per 5 meters and contain 300 to 1200 LEDs. It lists the available LED chip types, colors, operating features, and notes that the strips support green energy, are RoHS compliant, CE certified, and have a life expectancy of around 30,000 hours. Power supplies and controllers must be ordered separately.
18 led-5m-dual-strip-lights
The document describes an LED light strip that contains 1200 LEDs per 5 meter section, consuming 96 watts of power. It uses SMD 3528 LED chips and is available in various colors like warm white, cool white, blue, green, red, and yellow. The light strip has a long life expectancy of around 30,000 hours and is dimmable and compatible with LED power supplies and controllers. It operates from 12VDC and is RoHS compliant, CE certified, and supports green energy applications.
16 led-240 w-street lamp
This document provides specifications for an LED street light that operates on 100-240VAC or 277VAC power. It has a beam angle of less than 120 degrees, saves approximately 55% energy, and produces 20,400 lumens of 6000K light from 8 high brightness 30W COB LEDs. Additional features include a power factor over 0.95, efficiency over 88%, a 50,000 hour life expectancy, an operating temperature range of -20 to 50 degrees Celsius, and an IP65 rating.
16 led-200 w-street lamp
The document describes an LED street light that has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, energy savings of around 55%, a brightness of 17,000 lumens at a color temperature of 6000K, a lifespan of 50,000 hours, an operating temperature range of -20 to 50 degrees Celsius, an IP65 rating for protection against dust and water, and is RoHS compliant, CE certified, and contains no mercury. It is suggested for use on highways, main roads, and city streets.
16 led-160 w-street lamp
The document summarizes the specifications of an LED street light that provides energy savings of around 55% compared to traditional lights. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, a luminosity of around 13,600 lumens at a color temperature of 6000K, a lifespan expectancy of over 50,000 hours, and an IP65 rating for protection against dust and water. The light supports green energy use and contains no mercury.
16 led-120 w-street lamp
This document provides specifications for an LED street light that uses 6 high-brightness COB LED chips. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, and can save around 55% energy. The light produces around 10,200 lumens at a color temperature of 6000K, and has an expected lifespan of over 50,000 hours with a power factor over 0.95 and efficiency above 88%.
16 led-080 w-street lamp
This document provides specifications for an LED street light that uses 4 high-brightness COB LEDs. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, and can save around 55% energy. The light produces around 6800 lumens at 6000K color temperature and has an expected life of over 50,000 hours with a power factor over 0.95 and efficiency above 88%. It is RoHS compliant, CE certified, and has an operating temperature range of -20 to 50 degrees Celsius.
13 led-20 w-flood light
This document provides technical specifications for an LED light fixture, including a beam angle of 120-150 degrees, energy savings of 60-70% compared to other lights, luminosities of 1600 lumens at 3000K and 1800 lumens at 6000K, support for green energy as it is RoHS compliant and contains no mercury, a lifespan of around 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, a power factor of at least 0.9, frame dimensions of 140x180mm, a wide input voltage range of 100-250VAC at 50/60Hz frequency, and a slogan about the future brightness shining with LED.
12 led-6 8-10_w-wall lamp
This document describes an LED light that can save up to 80% in energy costs. It has a color temperature of 3200K, is RoHS compliant without mercury, CE certified, and has a high power LED with a lifespan of around 50,000 hours. The light has a color rendering index over 80, power factor above 0.9, and works with an input voltage range of 100-250VAC at 50/60Hz. It has a safe product voltage of 12V.
11 led-30 w-ceiling pendent lamp
The document describes an LED light fixture that provides energy savings of up to 80% compared to traditional lighting. It has a color temperature of 3200K, contains no mercury or hazardous materials, and is RoHS and CE certified. The high-power LED light has an expected lifespan of around 50,000 hours and a color accuracy rating over 80.
11 led-18 w-ceiling pendent lamp
EPACS-MFS is an LED lighting company that offers energy efficient lights that can save up to 80% in energy costs. Their high power LED lights have a color temperature of 3200K, CRI over 80, power factor above 0.9, and a lifespan of around 50,000 hours. The lights are RoHS compliant, CE certified, and operate safely at 12V with a wide input voltage range of 100-250VAC at 50/60Hz.
10 led-45 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x132mm and required depth of 136mm, a beam angle of 80 degrees, energy savings of 70-80% compared to other lights, luminosity of 3650 lumens at 3000K and 3825 lumens at 6000K, support for green energy as it is RoHS compliant and contains no mercury, CE certification, a life expectancy of 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, a power factor of at least 0.88, and a wide input voltage range of 100-250VAC at 50/60Hz.
10 led-38 w-shop lamp
An LED light fixture provides energy savings of 70-80% compared to traditional lights, with a brightness of 3150-3200 lumens depending on color temperature, a 50,000 hour lifespan, high color accuracy and power factor, and a wide input voltage range, making it an eco-friendly and high-performance lighting option.
10 led-38 w-2-shop lamp
This document provides technical specifications for an LED light fixture, including its dimensions, lumen output at different color temperatures, energy savings compared to other lights, long life expectancy of 50,000 hours, wide voltage input range, RoHS and CE compliance, and low heat dissipation. It promotes the product as saving energy and being environmentally friendly.
10 led-30 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x132mm with a required depth of 136mm and a beam angle of 80 degrees. It claims the fixture saves 70-80% energy and has a luminosity of 2350 lumens at 3000K or 2500 lumens at 6000K, while being RoHS compliant, CE certified, and having a 50,000 hour life expectancy when operated from -20 to 40 degrees Celsius.
10 led-20 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x130mm and required depth of 90mm, a beam angle of 60/120 degrees, energy savings of 70-80% compared to other lights, luminosity of 1700Lm at 3000K and 1800Lm at 6000K, support for green energy as it is RoHS compliant and contains no mercury, CE certification, a life expectancy of 50,000 hours, an operating temperature range of -20 to +40 degrees Celsius, a Color Rendering Index over 75, a power factor of at least 0.88, frame dimensions of 230x145mm, a wide input voltage range of 100-250VAC at 50/60Hz frequency,
10 led-8-30 w-shoplamp
This document provides technical specifications for LED lights including cut-out dimensions ranging from 98-205mm, a required depth of 175mm, a beam angle of 80 degrees, energy savings of 70-80%, luminosity levels ranging from 630-2500Lm depending on color temperature, support for green energy as the lights are RoHS compliant and contain no mercury, a CE certification, a life expectancy of 50,000 hours, an operating temperature range of -20 to +40 degrees Celsius, a Color Rendering Index greater than 75, a power factor of at least 0.88, frame dimensions ranging from 108-215mm, a wide input voltage range of 100-250VAC at 50/60Hz frequencies, and a note
More from EPACS ( Electrical Power and Control System ) (20)
Recently uploaded
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaIron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Recently uploaded (20)
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
02 led-7 w-cylinder
- 1. www.epacs-mfs.com technical@epacs-mfs.com MOHAMMED F. AL-SHAHRI EST. ﺍﻟﺘﺠﺎﺭﻳﺔ ﺍﻟﺸﻬﺮﻱ ﻓﺘﺤﻲ ﻣﺤﻤﺪ ﻣﺆﺳﺴﺔ AVAILABLE SOCKETS AND VOLTAGES: GU10 - 90~260VAC E27 - 90~260VAC E14 - 90-260VAC Working Temperature Range -20...+40°C Life Expectance ≈ 50'000 Hours Size: 97.5mm × Ø 31.5mm BEAM ANGLE 360° ENERGY SAVING ≈ 80% LUMINOSITY: WW@3000K≈600Lm CW@6000K≈650Lm Suitable for use in a great variety of Lamps SUPPORT GREEN ENERGY ! RoHS compliant contains no Mercury CE Certified 42 High Bright SMD 5050 LED Low Heat Dissipation The Future Brightness shines with LED