6. Code: 04001005
WPP105M wound polypropylene cartridge 20'' - 1 micron (25)
The manufacturing procedure is founded on the wrapping of an appropriate polypropylene yarn on a inner
bored support (core OD28mm), that produces a particular honeycomb texture that consents to obtain on
the filtration mass section some spiral micropass and funnel micro-pass. Yarn Wound Filters are a cost
effective solution for the reduction
of sand, silt, rust, dirt & scale particles. Max temperature: 80°.
Melt blown polypropylene cartridges
Code: 04002001
Ionicore Melt blown polypropylene cartridge 5" - 5 micron (100)
Features
Service life: When completely dirt - Max. 6 months
Flow rate: 1,05 gpm (4L/min)
Pressure: 75psi (5,17 bar) max.
Max differential pressure: 103 kpa (1,03 bar)
Temperature Rating: 39,2 - 174°F (4 - 79°C)
Efficiency: 95%
Dimensions H.xO.D.: 5" x 2-1/2" (Inch) / 127 x 63 (mm.)
I.D. Core 1,141" (Inch) / 29 (mm.)
Core: Without - Grooves Finishing
Variants
Code Description
04002001-08 Ionicore Melt blown polypropylene cartridge 5" - 5 micron (50)
16 July 2018 6/27
10. Dimensions H.xO.D.: 10" x 2-1/2" (Inch) / 254 x 63 (mm.)
I.D. Core 1,102" (Inch) / 28 (mm.)
Core: Without - Grooves Finishing
Variants
Code Description
04002009-01 Ionicore Blue antibacterial Melt blown polypropylene cartridge 10'' - 1 micron (50)
04002009-02 Ionicore Blue antibacterial Melt blown polypropylene cartridge 10'' - 5 micron (50)
04002009-03 Ionicore Blue antibacterial Melt blown polypropylene cartridge 10'' - 10 micron (50)
04002009-04 Ionicore Blue antibacterial Melt blown polypropylene cartridge 10'' - 20 micron (50)
04002009-05 Ionicore Blue antibacterial Melt blown polypropylene cartridge 10'' - 50 micron (50)
Ionicore Blue antibacterial Melt blown polypropylene cartridge is a new type of filter cartridge that meets
safer and healthier filtration requirements with high efficiency and dirt holding capacity. The filters are also
bacteriostatic for the addiction of silver antibacterial ion to ensure the maximum safety.
Features:
- Range of filtration from 1 to 50 microns.
- Graded density structure for maximum dirt holding capacity.
- Addiction of silver antibacterial ion ingredient to ensure drinking safety.
- Micro-denier melt blown PP fiber, high removal ratings and low pressure drop.
- Safe materials and high cleaning rate product in compliance whit FDA requirements.
Application:
- Food and beverage.
- Bottled water production.
- Household water dispenser, water purification systems.
- Commercial water purification systems, drinking water systems.
Code: 04002006
Green Filter Melt blown polypropylene cartridge 20" - 1, 5, 20,
50 micron (25)
Features
Internal diameter: 28 mm.
External diameter: 64 mm.
Efficiency: 95%
Pressure: 6bar (87psi) max.
Max differential pressure: 5 bar (500 kpa) at 21°C
Nax reccomended differential pressure: 2,5 bar (250kpa)
Temperature Rating: 149°F (65°C) max.
Flow rate 1 micron: 6 gpm (23,3L/min)
Flow rate 5 micron: 11,8 gpm (45L/min)
Flow rate 20 micron: 19,8 gpm (75L/min)
Flow rate 50 micron: 20 gpm (76,6L/min)
Variants
Code Description
04002006-01 Green Filter Melt blown polypropylene cartridge 20" - 1 micron (25)
04002006-03 Green Filter Melt blown polypropylene cartridge 20" - 5 micron (25)
04002006-04 Green Filter Melt blown polypropylene cartridge 20" - 20 micron (25)
04002006-05 Green Filter Melt blown polypropylene cartridge 20" - 50 micron (25)
16 July 2018 10/27
11. Code: 04002007
Melt blown polypropylene cartridge 2''x12" (50)
Sediment pre-filter for different models Hydrotech RO System, including the Series 1240 Ver E & M PRO.
Application: to remove particles in suspension. Replace cartridge every 6 months.
Big Melt blown polypropylene cartridges
Code: 04003001
Green Filter Big Melt blown polypropylene cartridge 9-3/4" - 1,
5, 50 micron (10)
Features
Internal diameter: 25 mm.
External diameter: 114 mm.
Efficiency: 95%
Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa.)
Temperature Rating: 176°F (80°C) max.
Flow rate 5 micron: 6,6 gpm (25L/min)
Flow rate 50 micron: 11,3 gpm (43,3L/min)
Variants
Code Description
04003001-01 Green Filter Big Melt blown polypropylene cartridge 9-3/4" - 5 micron (10)
04003001-02 Green Filter Big Melt blown polypropylene cartridge 9-3/4" - 50 micron (10)
16 July 2018 11/27
12. Code: 04003002
Green Filter Big Melt blown polypropylene cartridge 20" - 5, 50
micron (10)
Features
Internal diameter (03): 28 mm.
Internal diameter (01): 25 mm.
Internal diameter (02): 25 mm.
External diameter (03): 111 mm.
External diameter (01): 114 mm.
External diameter (02): 114 mm.
Efficiency: 95%
Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa.)
Temperature Rating: 176°F (80°C) max.
Flow rate 1 micron: 6 gpm (23,3L/min)
Flow rate 5 micron: 11,8 gpm (45L/min)
Flow rate 50 micron: 20 gpm (76,6L/min)
Variants
Code Description
04003002-03 Big Melt blown polypropylene cartridge 20" - 1 micron (4)
04003002-01 Green Filter Big Melt blown polypropylene cartridge 20" - 5 micron (10)
04003002-02 Green Filter Big Melt blown polypropylene cartridge 20" - 50 micron (10)
Carbon block cartridges
Code: 04004001
Carbon Block cartridge 2,5''x5'' - 5 micron (50)
Carbon block cartridges.
Compressed extruded carbon.
Dechlorination and stench deletion.
For alimentary use.
16 July 2018 12/27
13. Code: 04004002
Green Filter Carbon Block cartridge 2,5''x9-3/4" - 10 micron (25)
Features
Internal diameter: 28 mm.
External diameter: 68 mm.
Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa) at 20°C
Temperature Rating: 122°F (50°C) max.
Flow rate: 0,9 gpm (3,6L/min)
Service life: 3.170 gallons (12.000L) max. 1 year
Extruded carbon block for dechlorination, odor removal.
Code: 04004003
Pentek SCBC-10 silver Carbon Block cartridge 2-7/8''x9-3/4" -
0,5 micron (12)
Features
Internal diameter: 28 mm.
External diameter: 74 mm.
Temperature Rating: 40 - 180ºF (4.4 - 82.2ºC)
Flow rate: 0,99 gpm (3,78L/min)
Service life: 998,4 gallons (3.780L) max. 1 year
The SCBC-10 Silver-Impregnated Carbon Block Filter is the same as the CBC-10 but is silver-impregnated
making it bacteriostatic so it remains hygienic for longer. Silver Impregnated Activated Carbon combines
the special advantages of two technologies into one product. Silver and activated carbon together make an
ideal bacteriostatic water filter media bed. Silver inhibits the growth of bacteria within the filter media bed.
The cartridge fits standard 10 inch housings for counter top and under counter water purifiers. The unique
structure enables it to reduce Giardia, Cryptosporidium, Entamoeba, and Toxoplasma cysts and fine
sediment particles down to 0.5 microns. Removes Chlorine Taste and Odor, Pesticides, Organics,
THM's(Trihalomethanes) & HAA5's(Haloacetic Acids). The SCBC10 activated carbon filter works by
adsorption and physical screening of contaminants. The carbon adsorbs contaminants by collecting organic
molecules and other substances on its porous surface. Carbon block filters consist of activated carbon
particles fused into a uniform block with enhanced adsorptive capacity and efficiency.
Contaminant Reduction:
* Chlorine Taste and Odor
16 July 2018 13/27
14. * Removes over 99% of Cryptosporidium, Entamoeba, Toxoplasma
* Pesticides
* Organics
* Cysts
* THM's (Trihalomethanes)
* HAA5's (Haloacetic Acids)
Code: 04004010
Ionicore Silver Coconut Carbon Block cartridge 2,5''x10" - 0.5,
5, 10 micron (20)
Features
Service life 0.5 micron: 20.000 galloni (75.708L) max. 1 year
Service life 5 micron: 17.000 galloni (64.352L) max. 1 year
Service life 10 micron: 15.000 galloni (56.781L) max. 1 year
Flow rate: 1,0 gpm (3,7854L/min)
Pressure: 87psi (6bar) max.
Max differential pressure 0.5 micron: 20 kpa (0,20 bar) max.
Max differential pressure 5 micron: 13 kpa (0,13 bar) max.
Max differential pressure 10 micron: 13 kpa (0,13 bar) max.
Temperature Rating: 40 - 180°F (4.4 - 82.2°C)
Gasket: Buna-N
End Caps: Polypropylene
Outer Wrap: Polypropylene
Netting: Polyethylene
Efficiency: 85%
Dimensions H.xO.D.: 10" x 2-1/2" (Inch) / 251 x 71 (mm.)
I.D. Core 1,062" (Inch) / 27 (mm.)
Variants
Code Description
04004010-01 Ionicore Silver Coconut Carbon Block cartridge 2,5''x10" - 0,5 micron (20)
04004010-04 Ionicore Silver Coconut Carbon Block cartridge 2,5''x10" - 5 micron (20)
04004010-05 Ionicore Silver Coconut Carbon Block cartridge 2,5''x10" - 10 micron (20)
This Coconut Carbon block are more than just ordinary carbon block filters.
There are 8 different carbon block formulations to meet your performance requirements.
This combination of high performance coconut carbon, unique binders and proprietary manufacturing
process delivers exceptionally low pressure drop, high dirt holding capacity and excellent contaminant
reduction.
The Silver Nano Technology Coconut Carbon Block Filter make it bacteriostatic so it remain hygienic for
longer, it combines the special advantages of two technologies. Silver inhibits the growth of bacteria within
the filter media bed. The filters fits standard 10 inch housings. The coconut activated carbon filter works by
adsorption and physical screening of contaminants by collecting organic molecules and other substances
on its porous surface, it consist of activated carbon particles fused into a uniform block with enhanced
adsorptive capacity and efficiency.
Features:
- Unique binder system
16 July 2018 14/27
15. - Superior adsorption capacity
- More carbon surface area
- Silver Nano Technology Coconut Carbon Block
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system.
Nota bene: The contaminants or other substances removed or reduced by this drinking water system are
not necessarily in your water.
Code: 04004004
Carbon Block cartridge 2,5''x9-7/8" - 10 micron (25)
Compressed extruded carbon.
Dechlorination and stench deletion.
For alimentary use.
Code: 04004009
Matrikx Carbon Block cartridge 2,5''x10" - 0.5, 2, 5 micron (20)
Features
Internal diameter: 28 mm. (1,102")
External diameter: 68 mm. (2,677")
Pressure: 87psi (6bar) max.
Max differential pressure: 1,0 psid @ 1 gpm
Temperature Rating: 39.2 - 113ºF (4 - 45ºC)
Flow rate 0.5 micron: 0,76 gpm (2,9L/min)
Flow rate 2 micron: 0,79 gpm (3L/min)
Flow rate 5 micron: 1,0 gpm (3,8L/min)
Service life: 3-6 month
Variants
Code Description
04004009-01 Matrikx Carbon Block cartridge 2,5''x10" - 0.5 micron (20)
04004009-02 Matrikx Carbon Block cartridge 2,5''x10" - 2 micron (20)
04004009-03 Matrikx Carbon Block cartridge 2,5''x10" - 5 micron (20)
Extruded carbon block for dechlorination, odor removal.
Filtration of fine sediments and reduction of flavor and smell: chlorine (CTO); volatile organic compounds
16 July 2018 15/27
16. (VOC) and heavy metals.
KX Technologies has one of the largest and most advanced production lines of activated carbon cartridges.
In each application, the extruded carbon in MATRIKX® cartridges guarantees an exceptional filtration and
absorption quality and performance, especially when compared with traditional granular activated carbon
cartridges (GAC).
Features:
- The pre-filter provides greater of turbidity retention and longer life.
- The MATRIKX® cartridges are available in a range of filtration degrees from 0,5 to 5 micron.
- Compactness and integrity of the filtering septum.
- An absorption capacity superior to common filters in granular activated carbon (GAC).
Code: 04004005
Carbon Block cartridge 2,5''x20" - 10 micron
Features
Internal diameter: 28 mm.
External diameter (01): 66 mm.
External diameter (02): 68 mm.
Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa) at 20°C
Temperature Rating: 122°F (50°C) max.
Flow rate (01): 0,79 gpm (3L/min)
Flow rate (02): 2,1 gpm (8L/min)
Service life (01): 6-12 month
Service life (02): 6.340,12 gallons (24.000L) max. 1 year
Variants
Code Description
04004005-01 Carbon Block cartridge 2,5''x20" - 10 micron (20)
04004005-02 Green Filter carbon Block cartridge 2,5''x20" - 10 micron (25)
Compressed extruded carbon. Dechlorination and stench deletion. For alimentary use.
Code: 04004006
Coconut Carbon Block CTO cartridge 2''x12" (25)
16 July 2018 16/27
17. Coconut CTO carbon block filter for several models Hydrotech RO System, including the 1240 Series E
Ver, M & PRO. Application: to remove odors, colors, taste, chlorine and its derivatives. Replace cartridge
every 6 months.
Code: 04004007
Omnipure OMB934 10M Coconut Carbon Block cartridge
2,5''x9,8" - 10 micron (20)
Features
Internal diameter: 26 mm.
External diameter: 68 mm.
Pressure: 8,6bar (125psi)
Max differential pressure: 1 bar (99,99 kpa)
Temperature Rating: 40 - 125ºF (4.4 - 51.7ºC)
Flow rate: 0,75 gpm (2,8L/min)
Service life: 10.000 gallons (37.800L) max. 1 year
Variants
Code Description
04004007-04 Omnipure OMB934 10M Coconut Carbon Block cartridge 2,5''x9,8" - 10 micron (20)
Extruded carbon block for dechlorination, odor removal.
Code: 04004008
Omnipure OMB200 5M Coconut Carbon Block cartridge
2,5''x20" - 5 micron (9)
Features
Internal diameter: 31,75 mm. (1,25")
External diameter: 63,49mm. (2,5")
Pressure: 17,23bar (250psi) max.
Max differential pressure: 6,89 bar (689,46 kpa)
Temperature Rating: 40 - 125ºF (4.4 - 51.7ºC)
Flow rate: 2 gpm (7,56L/min)
Service life: 20.000 gallons (75.708L) max. 1 year
Variants
Code Description
04004008-05 Omnipure OMB200 5M Coconut Carbon Block cartridge 2,5''x20" - 5 micron (9)
Extruded carbon block for dechlorination, odor removal.
16 July 2018 17/27
18. Big Carbon Block cartridges
Code: 04006001
Green Filter BIG CPP carbon block cartridge 10" - 10 micron (6)
Features
Internal diameter: 28 mm.
External diameter: 118 mm.
Pressure: 7,5bar (101,5psi) max.
Temperature Rating: 140°F (60°C) max.
Flow rate: 7 gpm (26,6L/min)
Extruded activated carbon cartridge.
Filter material: extruded carbon.
Code: 04006002
Green Filter BIG CPP carbon block cartridge 20" - 10 micron (6)
Features
Internal diameter: 28 mm.
External diameter: 118 mm.
Pressure: 7,5bar (101,5psi) max.
Temperature Rating: 140°F (60°C) max.
Flow rate: 14 gpm (53,3L/min)
Extruded activated carbon cartridge. * Filter material: extruded carbon. * Micron Rating: 10
16 July 2018 18/27
19. Granular Activated carbon cartridges (GAC)
Code: 04005001
Green Filter granular activated carbon cartridge (GAC) 9-3/4"
(25)
Features
Internal diameter: 25 mm.
External diameter: 75 mm.
Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa) at 20°C
Temperature Rating: 122°F (50°C) max.
Flow rate: 0,9 gpm (3,6L/min)
Code: 04005002
Green filter granular activated carbon cartridge (GAC) 20'' (25)
Features
Internal diameter: 28 mm.
External diameter: 75 mm.
Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa) at 20°C
Temperature Rating: 122°F (50°C) max.
Flow rate: 2,1 gpm (8L/min)
16 July 2018 19/27
20. Big granular activated carbon cartridges (GAC)
Code: 04007001
Green Filter BIG GAC cartridge 9-3/4'' (10)
Features
Internal diameter: 28 mm.
External diameter: 117 mm.
Pressure: 6bar (87psi) max.
Temperature Rating: 140°F (60°C) max.
Flow rate: 7 gpm (26,6L/min)
Granular activated carbon cartridge.
Filter material: granular activated carbon.
Code: 04007002
Green Filter BIG GAC cartridge 20" (6)
Features
Internal diameter: 28 mm.
External diameter: 117 mm.
Pressure: 6bar (87psi) max.
Temperature Rating: 140°F (60°C) max.
Flow rate: 14 gpm (53,3L/min)
Granular activated carbon cartridge.
Filter material: granular activated carbon.
16 July 2018 20/27
21. Dual layer filters (sediment + carbon)
Code: 04008001
Two-in-one dual cartridges 5 PP+GAC (25)
Polypropylene Replacement, Cartridge for removal of: Sand, Silt, Dirt and Rust Particles.
GAC Replacement, Cartridge for removal of: odor and chlorine from water.
For water use only This cartridge fits most standard In-Line Filter Housing.
* Max Water temperature: 125°F (52°C)
* Micron Rating: 5 micron.
* Dimension: 2,5”x10”(60mmX 251 mm)
* Max pressure: 125 Psi (8,3 bar)
* Flow rate: 3lt./min.
* Service life: 1.587 gallons (6.000L) max. 1 year
Micron ratings is nominal. Installation and housing design can affect performance. This filter will not remove
cysts, bacteria or viruses. Do not use where the water is microbiologically unsafe or with water of unknown
quality without adequate disinfection before or after the unit. This cartridge will not remove chemicals or
disinfect water. Gac installed upwards.
Stainless Steel 316 cartridges
Code: 04009001
Stainless Steel 316 cartridges 5", 7", 9-3/4", 20" - 60 micron (15)
Variants
Code Description
04009001-01 Stainless steel 316 cartridge 5" - 60 micron (15)
04009001-02 Stainless steel 316 cartridge 7" - 60 micron (15)
04009001-03 Stainless steel 316 cartridge 9-3/4" - 60 micron (15)
04009001-04 Stainless steel 316 cartridge 20" - 60 micron (1)
Stainless steel cartridge particularly suitable in critical applications such as in the treatment of corrosive
fluids or in processes involving high temperatures.
Mechanical filtration surface.
16 July 2018 21/27
22. Max. Operating +90°C
Smooth stainless steel 316
For housings ½ "- ¾" - 1"
Pleated polyester sediment cartridges
Code: 04010001
Green filter pleated polyester cartridge 9-3/4'' - 1, 5, 50 micron
(25)
Features
Internal diameter: 28 mm.
External diameter: 68 mm.
Core: Polypropylene
End Caps: Vinyl Plastisol
Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa.)
Temperature Rating: 176°F (80°C) max.
Flow rate 1 micron: 2,9 gpm (11,3L/min)
Flow rate 5 micron: 5,9 gpm (22,6L/min)
Flow rate 50 micron: 10,1 gpm (38,4L/min)
Variants
Code Description
04010001-01 Green filter pleated polyester cartridge 9-3/4" - 1 micron (25)
04010001-02 Green filter pleated polyester cartridge 9-3/4" - 5 micron (25)
04010001-03 Green filter pleated polyester cartridge 9-3/4" - 50 micron (25)
High chemical resistance.
Central polyethylene pipe and perforated disk.
PH range: 3 to 11
Code: 04010002
Green filter pleated polyester cartridge 20'' - 1, 5, 50 micron (25)
Features
Internal diameter: 28 mm.
External diameter: 68 mm.
Core: Polypropylene
End Caps: Vinyl Plastisol
16 July 2018 22/27
23. Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa.)
Temperature Rating: 176°F (80°C) max.
Flow rate 1 micron: 5,9 gpm (22,6L/min)
Flow rate 5 micron: 11,9 gpm (45,3L/min)
Flow rate 50 micron: 15.9 gpm (60,5L/min)
Variants
Code Description
04010002-01 Green filter pleated polyester cartridge 20" - 1 micron (25)
04010002-02 Green filter pleated polyester cartridge 20" - 5 micron (25)
04010002-03 Green filter pleated polyester cartridge 20" - 50 micron (25)
High chemical resistance. Central polyethylene pipe and perforated disk.
PH range: 3 to 11
Big Pleated polyester sediment cartridges
Code: 04011001
Big Pleated polyester cartridge 20'' - 1, 5, 50 micron (10)
Features
Internal diameter: 28 mm.
External diameter: 114 mm.
Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa.)
Temperature Rating: 176°F (80°C) max.
Flow rate 5 micron: 11,9 gpm (45,3L/min)
Flow rate 50 micron: 15.9 gpm (60,5L/min)
Variants
Code Description
04011001-01 Big Pleated polyester cartridge 20'' - 5 micron (10)
04011001-02 Big Pleated polyester cartridge 20'' - 50 micron (10)
Pleated polyester cartridge.
Maximum service temperature 80 ºC.
Maximum differential pressure 3.5 bars.
External diameter: 100 mm.
Filter material: polypropylene.
16 July 2018 23/27
24. Code: 04011002
Big Pleated polyester cartridge 9-3/4'' - 5, 50 micron
Features
Internal diameter: 28 mm.
External diameter: 114 mm.
Pressure: 6bar (87psi) max.
Max differential pressure: 0,8 bar (80 kpa.)
Temperature Rating: 176°F (80°C) max.
Flow rate 5 micron: 5,9 gpm (22,6L/min)
Flow rate 50 micron: 9,9 gpm (37,8L/min)
Variants
Code Description
04011002-01 Big Pleated polyester cartridge 9-3/4'' - 5 micron (10)
04011002-02 Big Pleated polyester cartridge 9-3/4'' - 50 micron (10)
Pleated polyester cartridge.
Maximum service temperature 80 ºC.
Maximum differential pressure 3.5 bars.
External diameter: 100 mm.
Height: 256mm.
Filter material: polypropylene.
Big demineralization resin cartridges
Code: 04011106
Big demineralization resin cartridge 20'' - 5 micron (6)
Cartridges with ionic exchange resin are used for eliminating ionic substance which are present in water.
According to the type of filter media used, they can by applied for treating water with calcium and
magnesium, reducing the presence of iron and obtain de-mineralized water.
16 July 2018 24/27
25. Washable mesh cartridges
Code: 04012001
Washable mesh cartridge 9-3/4" - 80 micron (50)
Washable cartridge with soul hard plastic and removable mesh filter.
Maximum Flow: 3.500lt/h.
Maximum Operating Temperature: 40 ° C
Ceramic candle cartridges
Code: 04013001
Cartridge ceramic candle with or with out carbon GAC
Variants
Code Description
04013001-C Candle ceramic cartridge Ø 55mm + GAC
04013001-E Candle ceramic cartridge Ø 55mm
Filter for water treatment With a porous structure, suitable to remove suspended particles, microorganisms
and bacteria, reduces turbidity and thanks to the granular carbon GAC ( composed of granules coconut) in
it allows you to remove any smells or bad tastes , present in water.
Specifications: Length-10" * Max Pressure-125 psi * Flow Max-5 lt/min * Temperature Max-60°C * Filtration
0,9 microns. To be used as a prefilter in osmosis or microfiltration systems (we recommend replacement
every 6 months max.). suitable for use with PP Vessel code 04013002.
16 July 2018 25/27