The Claryfil Visco M cartridge filter is designed for high-temperature liquids and organic solvents. It uses polyester fiber media that allows filtration of liquids at temperatures up to 100°C. The molded polyester layers provide excellent functionality for highly viscous liquids. Controlled gradient porosity throughout the cartridge extends service life. It is suitable for applications in food/drink, electronics, and chemical engineering.

1. Filter Cartridges:
Claryfil Visco M
High Performance Filter Cartridge

2. Maximum forward differential pressure 0.40 MPa (4.0 bar, 58 psi) @ 20°C (68°F)
01
Claryfil Visco M
Bicomponent Filters for High Temperature Viscosity Demands
Materials: Filter Media Polypropylene
Endcaps, Core* Available on request
Specification
Retention rating: 0.5, 1, 2, 3, 5, 10, 20, 25 μm
Standard (OD 63 mm)
Surface area: ≥ 0.52 ft2 per 10” cartridge length
Maximum operating
conditions:
Recommended change-out differential pressure
Dimensions (nominal): Length
Maximum operating temperature 100°C ( 212°F )
Standard OD/ID 63±1.5 / 30±1.5 mm
10”, 20”, 30”, 40”
*Only available on request
The Claryfil Visco M cartridge filters are an example of breakthrough
in fiber technology. Claryfil Visco M Filters are designed and
optimized for high-temperature liquids and organic solvents for
which olefin filters are not suitable. To meet diverse process
requirements, the Claryfil Visco M cartridge filter is made of
polyester. It provides superior functionality for a wide range of
applications. Consisting entirely of molded layers, the filter provides
excellent functionality with highly viscous liquids. The molded
layers function as a support for the cartridge filter. Further the
controlled gradient porosity throughout the cartridge extends the
service life.
Features and Benefits
+ The use of polyester fiber as the material makes it possible to use the Claryfil Visco M cartridge filter for applications for which
olefin SEKISO filters are not suitable, such as filtration of high temperature liquids and organic solvents.
+ The entire filter is thermally bonded and formed into a single molded unit. This results in high pressure tolerance and suitability
for use with highly viscous liquids.
+ High precision and extended service life are achieved by controlling the fiber density gradient, which is key to filter
performance.
+ The entire filter is thermally bonded, forming gaps between the uniform fibers and providing extremely stable and
precise filtering.
+ All products are washed post manufacturing to ensure removal of surface active agents and other contaminants for little
or no foaming.
Applications
+ Food and drinking water
+ Electronic components.
+ Chemical engineering.
O-ring/Gasket Silicon , FKM , Buna-N , EPDM
2.4 bar (35 psi)

3. For part numbers & ordering information of custom filter elements please contact Gopani executive.
Disclaimer
The information contained within this catalog and the specifications mentioned tare intended to provide information about products
available for purchase from the Gopani group of companies (“Gopani”). All reasonable efforts have been made to ensure the
accuracy of the information. However, Gopani cannot be held responsible for any errors or unexpected un-fulfillment of product or
performance. Gopani does not warrant the accuracy and reserves the right to make changes to the catalog and product
specifications at any time without prior notice.
Water Flow Rate (l/min)
Pressure
Drop(MPa)
0.01
0.005
0 10 20 30 40
M-01
M-03
M-05
M-10
Pressure-resistance strength :
Water pressure tested at 0.8MPa at 20 °C.
Heat-resistance strengh : Hot water tested at 80 ºC.
Test Conditions : 250mm Cartridge @ 20ºC (No dust)
Before using the product, make sure that it confirms to
your process conditions.
Quality & Performance
02
Ordering Information
Claryfil Visco M
Part Number Generation
Standard Box Pack Information :
50 pcs. / box (for 10” standard )
25 pcs. / box (for 20”standard )
25 pcs. / box (for 30” standard )
25 pcs. / box (for 40” standard )
Micron
C= 0.5 μm
D= 1 μm
E= 2 μm
F= 3 μm
G= 5 μm
H= 10 μm
I= 20 μm
J= 25 μm
Length
10=10”
20=20”
30=30”
40=40”
Material
PP=Polypropylene
Core
X= No core
Diameter
S=63 mm
Seal
X=None
B=Buna-N
S=Silicon
V=FKM
E=EPDM
CVM
End Fitting
0=None (DOE w/o End Cap)
1=Fin/226, Code-7 with Fin
2=Fin/222-T1,SOE T1
(45mm) with Fin
3=Flat/226, Code-7 Flat end
4=Flat/222-T1,SOE T1
(45mm) Flat
5=DOE (with End Cap)
6=Fin/222-T2,SOE T2 (47mm)
with Fin
7=Flat/222-T2,SOE T2 (47mm)
Flat
8=Fin/222-T3,SOE T3 (42mm)
Flat
9=Flat/222-T3,SOE T3 (42mm)
Flat

4. The fiber consists of a core component formed of a polyester resin and a covering component formed of a co-polymerized polyester
resin, in which only the covering components are fused together by the application of heat to form the filter media to be wrapped
around the core. (Left) Filter Media structure. (Right) Cross section of Bicomponent fiber. (Below) Filter Media Gradient.
Media Composition
Acetic acid
Hydrochloric acid
Nitric acid
Sulphuric acid
Methanol
Ethanol
Butanol
Ethyl acetate
Acetone
Methyl ethyl ketone
⃝
⃝
⃝
⃝
⃝
⃝
⃝
⃝
⃝
⃝
03
Kind Chemical Chemical
Ambient Temp Ambient Temp
20%
20%
10%
30%
Acid
Alcohol
Ester
Ketone
n-Hexane
Toluene
Light oil,
Kerosene
Oil
Vegetable oil
Animal oil
Mineral oil
◯
◯
◯
◯
◯
◯
◯
Hydro
carbon
Others

5. 04

6. About us At Gopani,we are managed by technocrats having more than 2 decades
of rich experience in designing and manufacturing of Cartridge filtration
systems, Bag filtration systems, Sparkler Filters, Strainers etc. from
various materials like Polypropylene, Stainless Steel, Mild Steel and
special alloys to relevant standards and codes for pharmaceuticals,
chemical plants, Refineries and other industries.
Gopani Product Systems has a vast and varied experience in the
Filtration Industry spanning more than two decades with close and
continuous relationship with renowned Manufacturers all across India
and with overseas customers too. Gopani has been acknowledged in
industry circles as an organization in continuous endeavor to bring the
best of the Filtration technologies and products. The Team Gopani has
today grown to include excellent technological brains with experience in
design and manufacture, keen to assist in providing the correct and
targeted solutions in the field of Filtration. Gopani values relationships
with stakeholders above all and this has given the highest happiness for
being in business.
Gopani

7. Gopani Product Systems :104 Kashi Parekh Complex,Swastik Cross Road,B/h Bhagwati Chambers,C.G.Road,Navrangpura,
Ahmedabad Gujarat-380009,INDIA . Email: info@gopani.com Phone: +91-79-26441972/1951 Website: www.gopani.com
For more information,write to us at info@gopani.com