This document provides information on various resins and filtering media products. It includes specifications for Green Resin and Resincore cation exchange resins, as well as for quartzite, zeolite, and Crystal Right filtering media. Technical details are provided on material composition, applications, features, packaging, and operating parameters. Product codes, descriptions, and prices are listed.
3. Resins
Code: 15000502
Green Resin cation exchange resin bag 1 lit. (25)
Variants
Code Description
15000502-01 Green Resin cation exchange resin bag 1 lit. (25)
15000502-02 Green Resin cation exchange resin bag 1 lit. (25) Monosferica performance
Tariff per liter.
Green Resin is a heterospherical high capacity strongly acidic cation exchanger in bead form. It is based on
cross linked polystyrene and has a gel structure. The resin contains sulphonic acid functional groups. It is
supplied moist in the sodium form.
Applications
Green Resin is used most widely in sodium form for potable water softening application. It can be used also
in two-stage de-ionising as the cation exchanger in the hydrogen cycle.
Features
Physical Form: Moist, golden-yellow to brown beads. * Wet screen Grading: 0.3-1.2 mm. * % Moisture
holding capacity 47 to 53 * Mechanical strength: Good. * Volume Change: -6% (Hydrogen to Sodium form)
* Voids: 40%, approximately. * Shipping weight: 820 kg/m3, approximately. * lonic form as supplied:
Sodium. * Maximum operating temperature: 120°C(H form) 140°C(Na form) * Operating pH range: 0-14 *
Resistance to reducing agents: Good. * Resistance to oxidising agents: Generally good Chlorine should be
absent. * Total ion exchange capacity: 1.92 eq/l96 kg. CaCO /m3, approximately.
Typical Operating Data
Bed depth: 0.75 m-1.5 m. * Treatment flowrate: 60 m/h, maximum * Backwash: 9 m/h for 5 minutes *
Regenerant: NaCl. * Concentration, % w/v: 10-15 * Regeneraton flowrate, m/h 3-18 Injection time minutes:
0-30
NSF/ANSI 61 certified.
Packaging specification
Supplied in 25 litres bags.
13 February 2018 3/10
4. Code: 15000504
Resincore cation exchange resin bag 1 lit. (25)
Variants
Code Description
15000504-01 Resincore RC120 cation exchange resin bag 1 lit. (25)
Resincore RC120 is a high purity premium grade bead form gel structured polystyrene sulphonate cation
exchange resin. It has an excellent integrity and an excellent chemical and physical stability.
The gel structure is composed of a cross linked styrenic and divinylbenzenic (DVB) structure with sulphonic
functional groups.
It has excellent chemical and physical stability, high capacity, low pressure drop.
International equivalent: S100LF, HCR-S(E)S, C100E, SR1L.
Feature & benefits:
* Uniform particle size, low pressure drop: 95% of beads are in the range from 16 to 45 mesh, giving a
lower pressure drop.
* Superior chemical and physical stability: high sphericity and high crush strengths together with a very
uniform particles size provide greater resistance to bead breakage.
Applications:
Resincore is used in all water softening, dealkalization, deionization, pure water and ultra-pure water
preparation, cane sugar and corn syrup demineralization, pharmaceuticals and chemical processing
applications and in the food industry.
The operating capacity of the resin depends on the amount and concentration of regenerant used, the total
hardness and flow rate of the inlet water. The resin can also be used in the hydrometallurgy and in the
metallic cation recovery, and in the glutamic acid preparation and separation.
The RC120 is widely used in multiple and mixed bed demineralizers with strong base anion exchange
resin, with excellent idraulic, dynamic, chimical and physical charateristics.
Bags:
25L, 1000L.
13 February 2018 4/10
5. Filtering medias
Code: 15515601
Quartzite filtering media from 0,3 to 18 mm 1kg. (25)
Variants
Code Description
15515601-04 Quartzite filtering media 3 - 5 mm 1kg. (25)
Code: 15515605
Zeolite filtering media from 0,5 to 2 mm 1kg. (20)
Variants
Code Description
15515605-01 Zeolite filtering media 0,5 - 1 mm 1kg. (20)
15515605-02 Zeolite filtering media 1 - 2 mm 1kg. (20)
Natural zeolites for filtration. Type of clinoptilolite for the treatment of water for human consumption.
Treatment:
Water filtration, turbidity reduction and suspended solids.
Technical features
Zeolite content: 82-86%
Apparent density: 0,80-0,85 g/cm3
Specific density: 2.350-2.380 kg/m3
Adsorption capacity: 6,98 mg/g
Pressure drop at 150°C: 5-6%
Loss for ignition at 650°C: 8-8,5%
Chemical composition:
Silica - 68,15%
Aluminum oxide - 12,30%
Potassium oxide - 2,80%
Calcium oxide - 3,95%
13 February 2018 5/10
6. Sodium oxide - 0,75%
Magnesium oxide - 0,90%
Ferric oxide - 1,30%
Titanium dioxide - 0,20%
Heavy metals content:
Lead - 8,0 mg/Kg
Cadmium -
Code: 15515602
Crystal Right resin remove Limescale, Iron, Manganese
Variants
Code Description
15515602-CR100 Crystal Right CR100 (28)
15515602-CR200 Crystal Right CR200 (28)
Only for technologic use.
Tariff per liter.
Crystal-Right™ remove from the water unoxidized iron, manganese and hardness in one step.
Crystal-Right™ Silica crystals are a natural choice for water treatment systems. No other product has
comparable efficacy in treatment water in one step.
These zeolite crystals come from a sodium aluminosilicate carefully produced and processed by Mineral-
Right using an exclusive technology. Through its unique crystalline structure, Crystal-Right™ provides
superior removal of hardness, unoxidized iron and manganese while raising pH levels of acidic water.
Unlike spherical granules of resin, the Crystal-Right™ crystals provide a better filtration and are completely
cleaned during backwashing faster than common resins, without loss of the product.
Consider the many benefits of a monosystem product single pass that day after day sets new industry
standards. Your resellers and customers will be amazed.
Crystal-Right™ Silica crystals can be of help in achieving a better water treatment system:
• Removal the unoxidized iron, manganese and hardness in one step;
• The version of CR 100 removes or reduces the ammonium in the water (max speed 10m/h);
• Raising pH levels of acidic water;
• The regeneretion is obtained using the 30% salt (NaCl) in less than the use of softening resins standard;
• Contrary to standard resins, chlorine has no negative effects on the functioning of CR and it is
recommended that a chlorination of the brine during regeneration to stop the proliferation of bacteria;
• Provide a superior filtration of sediments and other impurities that turbidity water;
• Chlorination of Crystal-Right™ crystals sanitize the bed and keeps a residual of chlorine, eliminating the
microbial load;
• If used correctly the Crystal-Right has a lifespan of about 10 years;
• Can be chlorinated without causing neither damage nor crushing of the product;
• Packed in convenient bags of 28 lit.
13 February 2018 6/10
7. Regeneration program suggested
28 LITERS of Crystal-Right
• PH range: 6+ (CR100); 7+ (CR200);
• Total unoxidized Iron and Manganese: 8 mg/l
• Range of Hardness: 5-68 °F (CR100); 5-137 °F (CR200);
• Upflow washing: 14 min.
• Brine and Rinse: 72 min.
• Aspiration Brine: 1,5 lit.
• Upflow washing: 15 min.
• Pressure vessel dimensions: 25x112 cm - 10x44"
42 LITERS of Crystal-Right
• PH range: 5+ (CR100); 7+ (CR200);
• Total unoxidized Iron and Manganese: 10 mg/l
• Range of Hardness: 5-68 °F (CR100); 5-137 °F (CR200);
• Upflow washing: 14 min.
• Brine and Rinse: 90 min.
• Aspiration Brine: 1,5 lit.
• Upflow washing: 15 min.
• Pressure vessel dimensions: 25x137 cm - 10x54"
71 LITERS of Crystal-Right
• PH range: 5+ (CR100); 7+ (CR200);
• Total unoxidized Iron and Manganese: 15 mg/l
• Range of Hardness: 5-68 °F (CR100); 5-137 °F (CR200);
• Upflow washing: 14 min.
• Brine and Rinse: 90 min.
• Aspiration Brine: 3,0 lit.
• Upflow washing: 15 min.
• Pressure vessel dimensions: 33x137 cm - 13x54"
To use the crystals require this features:
• Hardness min 5 °F
• TDS (Total Dissolved Solids) min 80 mg/l
• Flow backwash between 17 and 24 m/h
Crystal-Right™ Silica crystals 100 (Cod. 15515602-CR 100)
Removal of hardness, unoxidized iron and manganese and raising pH levels
Crystal-Right™ Silica crystals 200 (Cod. 15515602-CR 200)
Maximum capacity of removal of hardness, unoxidized iron and manganese
Code: 15515603
System Mini-Test Efficacy of Crystal Right
System Mini-Test CR, for the Crystal Right.
Regenerate the resin before use (with brine)
13 February 2018 7/10
8. It is recommended that a water analysis before and after the use of Crystal Right to verify the efficacy of the
product on your water.
Code: 15515604
TURBIDEX filtering media (28)
Tariff per liter.
Hyper-Filtration Media for Industrial & Potable Water Treatment Systems.
The Turbidex is a technological material, advanced, nothing to do with the sand which is a poor material
and works mechanically. Turbidex™ is more than our name it's the product as well. Turbidex™ granules
consist of a high surface area alumino-silicate mineral that provides exceptional suspended solids filtration.
The macro porous nature of Turbidex™ allows for filtration at levels below 5 Microns in particle size.
The irregular surface area and extensive porosity of Turbidex™ makes it the perfect filtration media for any
application where solids removal is essential to the process. The Turbidex is a filtering media that very
effectively replaces sand in the clarifier filters.
The Science of Turbidex™
Turbidex™ is the latest generation in filtration media. Traditional sand and multimedia were satisfactory for
some water treatment but industries that require almost pure water demanded a media that not only filters
down to 5micron but saves time and money in application and usability.
THE BENEFITS OF TURBIDEX™:
Hyper Filtration Efficiency
The filtration increase grade is of 7 - 10 times; with the turbidex We arrive to filter until 5 microns, with the
sand is hard to filter below 40 (longer life of the systems with turbidex).
Higher Flow Rates
With nominal service flow rates up to 15 gpm/ft2 in pressure filters, Turbidex™ allows significant savings in
initial equipment costs when compared to traditional medias. Turbidex™ allows for peak flow rates up to 20
gpm/ft2 Turbidex.
Superior Water Clarity
Traditional sediment filtration media rely on mechanical straining to remove suspended solids for turbidity
reduction. Turbidex™ filtration media incorporates straining as well as ion exchange, sedimentation and
flocculation to produce crystal clear water down to <0.1 NTU of turbidity.
Water Savings
The load capacity of Turbidex ™ is up to 1.5 times higher compared to various filtering medias and up to 2.8
times higher compared to sand filters (less operating costs).
Systems reduced
At the same flow rate with Turbidex™ You can use very often less volume of filter bed and then smaller
vessels (less system costs).
Reduce pressure drop
At the same flow, you can use very often smaller pumps, the Turbidex ™ has less pressure drop (less
system costs).
Lightweight Media
Weighing 50-70% less than traditional medias, using Turbidex™ will result in substantial freight savings.
Resistant
High resistance to acids, chlorine and chemicals in general. In the pools also retains the ammonia.
13 February 2018 8/10
9. INDUSTRIES BENEFITING FROM TURBIDEX™:
Industrial - Aquaculture - Municipal - Commercial - Food & Beverage - Water Recycle - Car wash -
Agriculture - Manufacturing - Pharmaceutical.
All these industries and more have realized the superior qualities of filtering water with Turbidex™. If your
industry is not listed, its likely that your water quality can be greatly enhanced by switching to Turbidex™.
Turbidex™ Operating Parameters and Physical Characteristics
Turbidex™ is the latest generation in filtration media. The reason is Turbidex's ability to filter water
beyond the competition with Physical Absorption, Electrostatic Absorption and Ion-Exchange. These
additional filtration qualities allows Turbidex™ to filter water down to as low as 3 microns.
Operating Parameters
* Bed depth: 30 - 48 inches
* Freeboard: 50% of bed depth
* Flow rate: 12 - 20 gpm/ ft2
* Backwash rate: 14 - 18 gpm/ ft2
* Replacement media ratio : 1:1
Physical Characteristics
* Color: off-White
* Bulk Density: 50 lbs./ft3
* Surface area: 14 to 25 m2/g
* Mesh Size: 14 x 30
* Uniformity Coefficient: 1.64
Examples of system sizing, with water speed of 20 m/h:
* To get 5 mc/h of flow you need a vessel 24x69 (diameter 610 x high 1890 mm) with 262 – 300 litres of
Turbidex (nominal flow = 5,84 mc/h)
* To get 10 mc/h of flow you need a vessel 30x72 (diameter 770 x high 2050 mm) with 427 – 450 litres of
Turbidex (nominal flow = 9,31 mc/h)
* To get 13,5 mc/h of flow you need a vessel 36x72 (diameter 927 x high 2120 mm) with 623 – 700 litres of
Turbidex (nominal flow = 13,49 mc/h)
Turbidex™ is certified with NSF.
13 February 2018 9/10